A study of p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens: chemical modification of histidine residues

New Insights into the Inhibition Mechanism of Betulinic Acid on α-Glucosidase

Betulinic acid (BA), an important pentacyclic triterpene widely distributed in many foods, possesses high antidiabetic activity. In this study, BA was found to exhibit stronger inhibition of α-glucosidase than acarbose with an IC₅₀ value of (1.06 ± 0.02) × 10^-5 mol L^-1 in a mixed-type manner. BA bound with α-glucosidase to form a BA-α-glucosidase complex, resulting in a more compact structure of the enzyme. The obtained concentrations and spectra profiles of the components resolved by the multivariate-curve resolution-alternating least-squares confirmed the formation of the BA-α-glucosidase complex. Molecular docking showed that BA tightly bound to the active cavity of α-glucosidase, which might hinder the entrance of the substrate leading to a decline in enzyme activity. The chemical modification of α-glucosidase verified the results of the computer simulation that the order of importance of the four amino acid residues in the binding process was His > Tyr > Lys > Arg.

Interdomain binding of NADPH in p-hydroxybenzoate hydroxylase as suggested by kinetic, crystallographic and modeling studies of histidine 162 and arginine 269 variants

The conserved residues His-162 and Arg-269 of the flavoprotein p-hydroxybenzoate hydroxylase (EC 1.14.13.2) are located at the entrance of the interdomain cleft that leads toward the active site. To study their putative role in NADPH binding, His-162 and Arg-269 were selectively changed by site-specific mutagenesis. The catalytic properties of H162R, H162Y, and R269K were similar to the wild-type enzyme. However, less conservative His-162 and Arg-269 replacements strongly impaired NADPH binding without affecting the conformation of the flavin ring and the efficiency of substrate hydroxylation. The crystal structures of H162R and R269T in complex with 4-hydroxybenzoate were solved at 3.0 and 2.0 A resolution, respectively. Both structures are virtually indistinguishable from the wild-type enzyme-substrate complex except for the substituted side chains. In contrast to wild-type p-hydroxybenzoate hydroxylase, H162R is not inactivated by diethyl pyrocarbonate. NADPH protects wild-type p-hydroxybenzoate hydroxylase from diethylpyrocarbonate inactivation, suggesting that His-162 is involved in NADPH binding. Based on these results and GRID calculations we propose that the side chains of His-162 and Arg-269 interact with the pyrophosphate moiety of NADPH. An interdomain binding mode for NADPH is proposed which takes a novel sequence motif (Eppink, M. H. M., Schreuder, H. A., and van Berkel, W. J. H. (1997) Protein Sci. 6, 2454-2458) into account.

Evolutionary divergence of pobA, the structural gene encoding p-hydroxybenzoate hydroxylase in an Acinetobacter calcoaceticus strain well-suited for genetic analysis

The pobA gene encoding p-hydroxybenzoate hydroxylase (PobA) from Acinetobacter calcoaceticus has been developed as a genetic tool for the analysis of structure-function relationships in this enzyme. By exploiting the favorable genetic system of A. calcoaceticus strain ADP1, it is possible both to select and to map mutations which disturb PobA activity; characterization and sequence determination of mutants derived in this manner may complement site-directed studies with the homologous Pseudomonas aeruginosa gene. We have determined the nucleotide (nt) sequence of A. calcoaceticus pobA and performed a systematic comparison of the deduced amino acid (aa) sequence with that of the PobA enzyme from Pseudomonas fluorescens, for which the three-dimensional structure is known. Despite a 26% difference in the G+C content of the homologous genes, constraints against structural divergence of the proteins were revealed by an overall identity of 62.4% in the aligned aa sequences of PobA. Clusters of identical sequence occur at previously identified sites of ligand binding and at regions associated with subunit-subunit interaction. Based on the conservation of specific residues involved in flavin binding, we have assembled a consensus sequence for nicotinamide-flavoprotein monooxygenases which differs from that of the oxidoreductase class of flavoproteins. In addition to the conserved regions shared by the two PobA homologs, there are isolated pockets of divergence. The nt sequence divergence in one such region within the A. calcoaceticus gene can be attributed to the acquisition of short nt sequence repetitions.

The temperature and pH dependence of some properties of p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens

The free and complexed flavoprotein, p-hydroxybenzoate hydroxylase, was studied by light-absorption, circular-dichroism and fluorescence techniques as a function of the pH. The following compounds served as ligands for the enzyme: p-hydroxybenzoate, p-fluorobenzoate, benzoate, p-aminobenzoate and tetrafluoro-p-hydroxybenzoate. Depending on the technique used, the various ligands exhibit pH-dependent physical properties and dissociation constants. The data can be fitted with pKa values in the range 7.7-7.9. It is suggested that this pKa value belongs to a tyrosine residue in the active center of the enzyme. This assignment is supported by published data and additional experiments.

Chemical modification of tyrosine-38 in p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens by 5'-p-fluorosulfonylbenzoyladenosine: a probe for the elucidation of the NADPH binding site? Involvement in catalysis, assignment in sequence and fitting to the tertiary structure

p-Hydroxybenzoate hydroxylase from Pseudomonas fluorescens was covalently modified by the nucleotide analog 5'-(p-fluorosulfonylbenzoyl)-adenosine in the presence of 20% dimethylsulfoxide. The inactivation reaction is pH-dependent and does not obey pseudo-first-order kinetics, due to spontaneous hydrolysis of the reagent. The kinetic data further indicate that a weak, reversible enzyme-inhibitor complex is an intermediate in the inactivation reaction and that only one amino acid residue is responsible for the loss of activity. The inactivation is strongly inhibited by NADPH and 2',5'ADP. Steady-state kinetics and 2',5'ADP bioaffinity chromatography of the modified enzyme suggest that the essential residue is not directly involved in NADPH binding. Sequence studies show that Tyr-38 is the main residue protected from modification in the presence of NADPH. From crystallographic studies it is known that the hydroxyl group of Tyr-38 is 1.84 nm away from the active site. Model-building studies using computer graphics show that this distance can be accommodated when FSO2BzAdo binds in an extended conformation with the sulfonylbenzoyl portion in an orientation different from the nicotin-amide ring of NADPH.

Crystal structure of p-hydroxybenzoate hydroxylase complexed with its reaction product 3,4-dihydroxybenzoate

Crystals of the flavin-containing enzyme p-hydroxybenzoate hydroxylase (PHBHase) complexed with its reaction product were investigated in order to obtain insight into the catalytic cycle of this enzyme involving two substrates and two cofactors. PHBHase was crystallized initially with its substrate, p-hydroxybenzoate and the substrate was then converted into the product 3,4-dihydroxybenzoate by allowing the catalytic reaction to proceed in the crystals. In addition, crystals were soaked in mother liquor containing a high concentration of this product. Data up to 2.3 A (1 A = 0.1 nm) were collected by the oscillation method and the structure of the enzyme product complex was refined by alternate restrained least-squares procedures and model building by computer graphics techniques. A total of 273 solvent molecules could be located, four of them being presumably sulfate ions. The R-factor for 14,339 reflections between 6.0 A and 2.3 A is 19.3%. The 3-hydroxyl group of the product introduced by the enzyme is clearly visible in the electron density, showing unambiguously which carbon atom of the substrate is hydroxylated. A clear picture of the hydroxylation site is obtained. The plane of the product is rotated 21 degrees with respect to the plane of the substrate in the current model of enzyme-substrate complex. The 4-hydroxyl group of the product is hydrogen bonded to the hydroxyl group of Tyr201, its carboxyl group is interacting with the side-chains of Tyr222, Arg214 and Ser212, while the newly introduced 3-hydroxyl group makes a hydrogen bond with the backbone carbonyl oxygen of Pro293.

Enzyme deactivation

Enzyme deactivation kinetics is often first-order. Different examples of first-order deactivation kinetics exhibited by different enzymes under a wide variety of conditions are presented. Examples of both soluble and immobilized enzymes are presented. The influence of different parameters, chemical modification of specific residues, inhibitors, inactivators, protecting agents, induced conformational changes by external agents, enzyme concentration, and different substrates on the first-order inactivation kinetics of different enzymes is analyzed. The different examples presented from a variety of different areas provides a judicious framework and collection demonstrating the wide applicability of first-order deactivation kinetics. Examples of reversible first-order deactivation kinetics and deactivation-disguise kinetics are also presented. Different mechanisms are also presented to model complex enzyme deactivations. The non-series type mechanisms are emphasized and these involve the substrate and chemical modifiers. Substrate-dependent deactivation rate expressions that are of "separable" and "non-separable" type are presented. Rate expressions involving time-dependent rate constants along with their corresponding mechanisms are presented. Examples of enzymes that exhibit a deactivation-free grace period are also given. An interesting case of enzyme inactivation is the loss of activity in the presence of an auto-decaying reagent. The method is presented by which the intrinsic inactivation rate constants may be obtained. Examples of pH-dependent enzyme inactivation are presented that may be modelled by a five-step (or a simplified two-step) mechanism, and also by a single-step mechanism involving residual activity for the final state. Appropriate examples of enzyme inactivation are presented in each case to highlight the different mechanisms involved.

Chemical modification of phenol hydroxylase by ethoxyformic anhydride

Phenol hydroxylase was inactivated by ethoxyformic anhydride. Part of the inactivation was related to modification of histidyl residues. The remaining part of the inactivation is proposed to be due to the modification of a lysyl residue which, we suggest, is identical with the one previously described, being essential for the binding of NADPH [Neujahr, H. Y. and Kjellén, K. G. (1980) Biochemistry 19, 4967-4972]. The overall inactivation reaction is biphasic and follows pseudo-first-order kinetics. Numerical analysis of kinetic data was applied to discriminate between simultaneous reactions at different sites. It is proposed that phenol hydroxylase contains two essential histidyl residues, located in or near the NADPH-binding sites. Ethoxyformylation of the lysyl residue(s) caused tightening of the binding of phenol and perturbation of the FAD spectrum of phenol hydroxylase, similar to that caused by phenolic effectors.

The elucidation of the microheterogeneity of highly purified p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens by various biochemical techniques

Highly purified p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens can be separated into at least five fractions by anion-exchange chromatography. All fractions exhibit the same specific activity and the enzyme exists mainly in the dimeric form in solution. Sodium dodecyl sulfate/polyacrylamide gel electrophoresis of a mixture of the different fractions reveals two apparent forms of enzyme molecules, while isoelectric focusing experiments, on the other hand, reveal six apparently different forms of enzyme molecules. It is shown that the different forms of enzyme molecules are due to the (partial) oxidation of Cys-116 in the sequence of the enzyme. This interpretation of the data is supported by kinetic measurements of the formation of hybrid dimeric molecules monitored by fast protein liquid chromatography, using purified enzyme containing Cys-116 either in the native and or the fully oxidized (sulfonic acid) state. By chemical modification studies using maleimide derivatives, 5,5'-dithiobis(2-nitrobenzoate) and H2O2, it is shown that sulfenic, sulfinic and sulfonic acid derivatives of Cys-116 are products of oxidation. The results are briefly discussed with respect to the possibility that this isolation artifact might also be partially responsible for the appearance of multiple forms of enzyme molecules in other biochemical preparations.

Cloning and genetic organization of the pca gene cluster from Acinetobacter calcoaceticus

The beta-ketoadipate pathway of Acinetobacter calcoaceticus comprises two parallel metabolic branches. One branch, mediated by six enzymes encoded by the cat genes, converts catechol to succinate and acetyl coenzyme A (acetyl-CoA); the other branch, catalyzed by products of the pca genes, converts protocatechuate to succinate and acetyl-CoA by six metabolic reactions analogous or identical to those of the catechol sequence. We used the expression plasmid pUC18 to construct expression libraries of DNA from an A. calcoaceticus mutant strain from which the cat genes had been deleted. Immunological screening with antiserum to the pcaE gene product, beta-ketoadipate:succinyl-CoA transferase I, resulted in the isolation of a cloned 11-kilobase-pair (kbp) fragment which inducibly expressed all six pca genes under control of the lac promoter on pUC18. The induced Escherichia coli cells formed the six pca gene products at levels 10- to 30-fold higher than found in fully induced A. calcoaceticus cultures, although protocatechuate 3,4-dioxygenase (the iron-containing product of the pcaA gene) from the recombinant strain possessed a relatively low turnover number. An E. coli culture expressing the cloned pca genes quantitatively converted protocatechuate to beta-ketoadipate; failure of the organism to metabolize the latter compound can be most readily ascribed to relatively low pool levels of succinyl-CoA, a required substrate for beta-ketoadipate:succinyl-CoA transferase, in E. coli. The gene order and direction of transcription were determined to be pcACBDFE by identification of enzymes expressed in subclones, by using natural transformation to identify subclones carrying DNA corresponding to dysfunctional alleles in mutant A. calcoaceticus strains, and by restriction mapping of both the 11-kbp fragment and derivatives of the 11-kbp fragment containing Tn5 in the pcaA, pcaB, pcaD, and pcaE genes. The fragment containing the pca gene hybridized strongly and specifically to a previously cloned fragment containing A. calcoaceticus cat genes.

Chemical modification of arginine residues in p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens: a kinetic and fluorescence study

The flavoprotein p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens was modified by several arginine-specific reagents. Modifications by 2,3-butanedione led to the loss of activity of the enzyme, but the binding of p-hydroxybenzoate and NADPH to the enzyme was little or not at all affected. However the formation of the enzyme-substrate complex of the modified enzyme was accompanied by an increase of the fluorescence of protein-bound FAD, in contrast to that of native enzyme which leads to quenching of the fluorescence. Enzyme modified by phenylglyoxal did not bind p-hydroxybenzoate nor NADPH. Quantification and protection experiments showed that two arginine residues are essential and a model is described which accounts for the results. Modification by 4-hydroxy-3-nitrophenylglyoxal reduced the affinity of the enzyme for the substrate and NADPH. The ligands offered no protection against inactivation. From this it is concluded that one arginine residue is essential at some stage of the catalysis. This residue is not associated with the substrate- or NADPH-binding site of the enzyme. Time-resolved fluorescence studies showed that the average fluorescence lifetime and the mobility of protein-bound FAD are affected by modification of the enzyme.

Kinetic analysis of enzyme inactivation by an autodecaying reagent

A simple method is described for the determination of both the pseudo-first-order rate constant and the second-order rate constant for enzyme inactivation by a chemical reagent which itself undergoes exponential decay. The validity of this method has been demonstrated in two test cases in which the labile diethyl pyrocarbonate was used to inactivate salicylate hydroxylase and bacterial luciferase.

Diethylpyrocarbonate inactivation of NAD-malic enzyme from Ascaris suum

Treatment with diethylpyrocarbonate results in a first-order loss of the malate oxidative decarboxylase activity of NAD-malic enzyme. First-order plots are biphasic, with about 40-50% activity loss in the first phase. The inactivation process is not saturable, and the second-order rate constant is 4.7 M-1 S-1. Malate (250 mM) provides complete protection against inactivation (as measured by a decrease in the inactivation rate), and less malate is required with Mg2+ present. Partial protection (50%) is afforded by either NAD+ (1 mM) or Mg2+ (50 mM). Treatment of modified (inactive) enzyme with hydroxylamine restores activity to 100% of the control when corrected for the effect of hydroxylamine on unmodified enzyme. A total of 10-13 histidine residues/subunit are acylated concomitant with loss of activity while 1-2 tyrosines are modified prior to any activity loss. The presence of Mg2+ and malate at saturating concentrations protect 1-2 histidine residues/subunit. The intrinsic fluorescence of the enzyme decreases with time after addition of diethylpyrocarbonate, but the rate constant for this process is at least 10-fold too low to account for the biphasicity observed in the first order plots. The histidine modified which is responsible for loss of activity has a pK of 8.3 as determined from the pH dependence of the rate of inactivation. The histidine titrated is still modified under conditions where the residue is completely protonated but at a rate 1/100 the rate of the unprotonated histidine. The results suggest that 1-2 histidines are in or near the malate binding site and are required for malate oxidative decarboxylation.

Purification and properties of NADH/NADPH-dependent p-hydroxybenzoate hydroxylase from Corynebacterium cyclohexanicum

Crude soluble extracts of Corynebacterium cyclohexanicum, grown on cyclohexanecarboxylic acid, were found to contain 4-hydroxybenzoate 3-hydroxylase which functions with NADH as well as NADPH. The purified enzyme preparation was electrophoretically homogeneous and contained FAD as prosthetic group. The relative molecular mass of the enzyme was estimated to be about 47000 by native and denaturated acrylamide gel electrophoresis, indicating that it is monomeric. The enzyme was stable at 60 degrees C for 10 min. The enzyme was highly specific for p-hydroxybenzoate. The activity was inhibited by several aromatic analogues of p-hydroxybenzoate such as p-aminobenzoate, p-fluorobenzoate, o-hydroxybenzoate, m-hydroxybenzoate, 2,4-dihydroxygenzoate, and 2,5-dihydroxybenzoate. The Km value for NADH was fairly constant, about 45 microM, in the pH range 7.0-8.4, whereas the Km value for NADPH increased from 63 microM to 170 microM as the pH rose from 7.0 to 8.4. V values in the same pH range, however, were approximately constant in both cases; about 30 mumol min-1 mg-1 for NADH, and 26 mumol min-1 mg-1 for NADPH. Mg2+ was required for full activity of the enzyme in low concentrations of phosphate buffer. The enzyme was inhibited by C1- which was non-competitive with respect to NADH, NADPH and p-hydroxybenzoate.

Histidyl residues at the active site of the Na/succinate co-transporter in rabbit renal brush borders

Mono-, dicarboxylic acid-, and D-glucose transport were measured in brush border vesicles from renal cortex after treatment with reagents known to modify terminal amino, lysyl, epsilon-amino, guanidino, serine/threonine, histidyl, tyrosyl, tryptophanyl and carboxylic residues. All three sodium-coupled co-transport systems proved to possess sulfhydryl (and maybe tryptophanyl sulfhydryl, disulfide, thioether and tyrosyl) residues but not at the substrate site or at the allosteric cavity for the Na co-ion. Histidyl groups seem to be located in the active site of the dicarboxylic transporter in that the simultaneous presence of Na and succinate protects the transporter against the histidyl specific reagent diethylpyrocarbonate. Lithium, which specifically competes for sodium sites in the dicarboxylic acid transporter, substantially blocked the protective effect of Na and succinate. Hydroxylamine specifically reversed the covalent binding of diethylpyrocarbonate to the succinate binding site. The pH dependence of the Na/succinate cotransport is consistent with an involvement of histidyl and sulfhydryl residues. We conclude that a histidyl residue is at, or is close to, the active site of the dicarboxylate transporter in renal brush border membranes.

Chemical modification of sulfhydryl groups in p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens. Involvement in catalysis and assignment in the sequence

The cysteine residues in p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens were modified with several cysteine reagents. One of the five sulfhydryl groups reacts rapidly and specifically with N-ethylmaleimide without inactivation of the enzyme. Cysteine-116 was found to be the reactive cysteine by isolation of a labeled tryptic peptide. The enzyme is easily inactivated by mercurial compounds. The original activity can be fully restored by treatment of the modified enzyme with sulfhydryl-containing compounds. The rate of incorporation of mercurial compounds is pH-independent and is pseudo-first-order up to 90-95% loss of activity. The reaction shows saturation kinetics. The substrate p-hydroxybenzoate protects the enzyme from fast inactivation. The mercurial compounds themselves inhibit the inactivation reaction at concentrations higher than 80 microM. A spin-labeled derivative of p-chloromercuribenzoate reacts fairly specifically with only Cys-152 on use of enzyme prelabeled with N-ethylmaleimide, in contrast to p-chloromercuribenzoate which reacts with additional cysteine residues, i.e. Cys-211 and Cys-158. From these results it is concluded that modification of Cys-152 decreases drastically the affinity of the enzyme for the substrate. The results strongly indicate that the substrate binding site and Cys-152 are interdependent. This observation is not obvious when the three-dimensional data only are considered. The modified enzyme exhibits a somewhat higher affinity for NADPH than the native enzyme. Modification of N-ethylmaleimide-prelabeled enzyme by p-chloromercuribenzoate leads to absorbance difference spectra showing maxima at 250 nm, 290 nm and 360 nm. The intensities of the absorbance difference maxima at 290 nm and 360 nm are strongly dependent on the pH value of the solution. The intensities are very low at low pH values and increase with increasing pH values, reaching a maximum at about pH = 9. The ionizing group shows a pK value of about 7.6. The maximal molar difference absorption coefficient at 290 nm is 3200 M-1cm-1 at pH 9, suggesting that tyrosine residues ionize under the conditions of modification of the enzyme. The results are discussed in the light of the known three-dimensional structure.

Modification of rat liver iodothyronine 5'-deiodinase activity with diethylpyrocarbonate and rose bengal; evidence for an active site histidine residue

Iodothyronine 5'-deiodinase activity of rat liver microsomes was rapidly and completely lost by treatment with diethylpyrocarbonate (DEP) and by photo-oxidation with Rose Bengal (RB). In both cases inactivation followed pseudo first order reaction kinetics. Inactivation by DEP was diminished in the presence of substrate or competitive inhibitors, and was reversed by hydroxylamine treatment. In addition to photo-oxidation, deiodinase activity was also inhibited by RB in the dark. This inhibition was reversible and competitive with substrate (Ki 60 nM). These results suggest the location of an essential histidine residue at or near the active site of rat liver iodothyronine deiodinase.

The importance of monopole-monopole and monopole-dipole interactions on the binding of NADPH and NADPH analogues to p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens. Effects of pH and ionic strength

NADPH binding to p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens is found to be strongly dependent on pH and ionic strength. In the ionic strength range of 0.02-0.15 M, optimal NADPH binding is observed at a pH value of 6.4. Extrapolation of the dissociation constants to infinite ionic strength shows that under these conditions optimal binding occurs at pH values greater than 8. Similar results were obtained for complexes between the enzyme and two NADPH analogues in the presence or absence of the substrate. The experimental data can be explained by a theoretical model in which monopole-monopole or monopole-dipole interactions between the enzyme and the ligand are dominant. Changes in the former interaction prevail at low ionic strength and low pH values while the changes in the latter prevail at high ionic strength and high pH values. The dipole moment of the enzyme in the direction of the NADPH binding site was calculated from the ionic strength and pH dependence of the complex formation. The calculated dipole moment of the enzyme is about 2000 Debye at pH 6 and decreases to about 1100 Debye at pH 8.5. The results are discussed with respect to published results, including data obtained from the enzyme from a different source.

p-Hydroxybenzoate hydroxylase from Pseudomonas fluorescens. 2. Fitting of the amino-acid sequence to the tertiary structure

The complete primary and tertiary structure of p-hydroxybenzoate hydroxylase is now known. The amino acid sequences of the two largest CNBr peptides have been fitted to the electron-density map at 0.25-nm resolution. The parts of the polypeptide chain contributing the residues to the FAD-binding site and the residues of the substrate-binding site have been identified. The active site is located in a large hydrophobic area enclosed by all domains of the enzyme structure. Here the substrate, p-hydroxybenzoate, is bound near, but not in direct contact with, the isoalloxazine ring system of FAD. Many side chains from the C-terminal part of the polypeptide chain are involved in subunit-subunit interactions. In the center of one of the largely hydrophobic contact areas between the subunits, a cluster of six aromatic amino acids was found.