Cytochrome c peroxidase compound ES is identical with horseradish peroxide compound I in iron-ligand distances

Impact of an Ionic Liquid Solution on Horseradish Peroxidase Activity

Horseradish peroxidase (HRP) is an enzyme that oxidizes pollutants from wastewater. A previous report indicated that peroxidases can have an enhancement in initial enzymatic activity in an aqueous solution of 0.26 M 1-ethyl-3-methylimidazolium ethyl sulfate ([EMIm][EtSO4]) at neutral pH. However, the atomistic details remain elusive. In the enzymatic landscape of HRP, compound II (Cpd II) plays a key role and involves a histidine (H42) residue. Cpd II exists as oxoferryl (2a) or hydroxoferryl (2b(FeIV)) forms, where 2a is the predominantly observed form in experimental studies. Intriguingly, the ferric 2b(FeIII) form seen in synthetic complexes has not been observed in HRP. Here, we have investigated the structure and dynamics of HRP in pure water and aqueous [EMIm][EtSO4] (0.26 M), as well as the reaction mechanism of 2a to 2b conversion using polarizable molecular dynamics (MD) simulations and quantum mechanics/molecular mechanics (QM/MM) calculations. When HRP is solvated in aq [EMIm][EtSO4], the catalytic water displaces, and H42 directly orients over the ferryl moiety, allowing a direct proton transfer (PT) with a significant energy barrier reduction. Conversely, in neat water, the reaction of 2a to 2b follows the previously reported mechanism. We further investigated the deprotonated form of H42. Analysis of the electric fields at the active site indicates that the aq [EMIm][EtSO4] medium facilitates the reaction by providing a more favorable environment compared with the system solvated in neat water. Overall, the atomic level supports the previous experimental observations and underscores the importance of favorable electric fields in the active site to promote catalysis.

Structure of dye-decolorizing peroxidase from Bacillus subtilis in complex with veratryl alcohol

Dye-decolorizing peroxidases (DyPs) are heme-containing peroxidases, which have promising application in biodegradation of phenolic lignin compounds and in detoxification of dyes. In this study, the crystal structure of BsDyP- veratryl alcohol (VA) complex delves deep into the binding of small substrate molecules within the DyP heme cavity. The biochemical analysis shows that BsDyP oxidizes the VA with a turnover number of 0.065 s^-1, followed by the oxidation of 2,6-dimethoxyphenol (DMP) and guaiacol with a comparable turnover number (k_cat) of 0.07 s^-1 and 0.07 s^-1, respectively. Moreover, biophysical and computational studies reveal the comparable binding affinity of substrates to BsDyP and produce lower-energy stable BsDyP-ligand(s) complexes. All together with our previous findings, we are providing a complete structural description of substrate-binding sites in DyP. The structural insight of BsDyP helps to modulate its engineering to enhance the activity towards the oxidation of a wide range of substrates.

Lignin peroxidase in focus for catalytic elimination of contaminants - A critical review on recent progress and perspectives

Lignin peroxidase (LiP) seems to be a catalyst for cleaving high-redox potential non-phenolic compounds with an oxidative cleavage of CC and COC bonds. LiP has been picked to seek a practical and cost-effective alternative to the sustainable mitigation of diverse environmental contaminants. LiP has been an outstanding tool for catalytic cleaning and efficient mitigation of environmental pollutants, including lignin, lignin derivatives, dyes, endocrine-disrupting compounds (EDCs), and persistent organic pollutants (POPs) for the past couple of decades. The extended deployment of LiP has proved to be a promising method for catalyzing these environmentally related hazardous pollutants of supreme interest. The advantageous potential and capabilities to act at different pH and thermostability offer its working tendencies in extended environmental engineering applications. Such advantages led to the emerging demand for LiP and increasing requirements in industrial and biotechnological sectors. The multitude of the ability attributed to LiP is triggered by its stability in xenobiotic and non-phenolic compound degradation. However, over the decades, the catalytic activity of LiP has been continuing in focus enormously towards catalytic functionalities over the available physiochemical, conventional, catalyst mediated technology for catalyzing such molecules. To cover this literature gap, this became much more evident to consider the catalytic attributes of LiP. In this review, the existing capabilities of LiP and other competencies have been described with recent updates. Furthermore, numerous recently emerged applications, such as textile effluent treatment, dye decolorization, catalytic elimination of pharmaceutical and EDCs compounds, have been discussed with suitable examples.

Synthetic Fe/Cu Complexes: Toward Understanding Heme-Copper Oxidase Structure and Function

Heme-copper oxidases (HCOs) are terminal enzymes on the mitochondrial or bacterial respiratory electron transport chain, which utilize a unique heterobinuclear active site to catalyze the 4H+/4e- reduction of dioxygen to water. This process involves a proton-coupled electron transfer (PCET) from a tyrosine (phenolic) residue and additional redox events coupled to transmembrane proton pumping and ATP synthesis. Given that HCOs are large, complex, membrane-bound enzymes, bioinspired synthetic model chemistry is a promising approach to better understand heme-Cu-mediated dioxygen reduction, including the details of proton and electron movements. This review encompasses important aspects of heme-O2 and copper-O2 (bio)chemistries as they relate to the design and interpretation of small molecule model systems and provides perspectives from fundamental coordination chemistry, which can be applied to the understanding of HCO activity. We focus on recent advancements from studies of heme-Cu models, evaluating experimental and computational results, which highlight important fundamental structure-function relationships. Finally, we provide an outlook for future potential contributions from synthetic inorganic chemistry and discuss their implications with relevance to biological O2-reduction.

Oxygen Activation and Radical Transformations in Heme Proteins and Metalloporphyrins

As a result of the adaptation of life to an aerobic environment, nature has evolved a panoply of metalloproteins for oxidative metabolism and protection against reactive oxygen species. Despite the diverse structures and functions of these proteins, they share common mechanistic grounds. An open-shell transition metal like iron or copper is employed to interact with O2 and its derived intermediates such as hydrogen peroxide to afford a variety of metal-oxygen intermediates. These reactive intermediates, including metal-superoxo, -(hydro)peroxo, and high-valent metal-oxo species, are the basis for the various biological functions of O2-utilizing metalloproteins. Collectively, these processes are called oxygen activation. Much of our understanding of the reactivity of these reactive intermediates has come from the study of heme-containing proteins and related metalloporphyrin compounds. These studies not only have deepened our understanding of various functions of heme proteins, such as O2 storage and transport, degradation of reactive oxygen species, redox signaling, and biological oxygenation, etc., but also have driven the development of bioinorganic chemistry and biomimetic catalysis. In this review, we survey the range of O2 activation processes mediated by heme proteins and model compounds with a focus on recent progress in the characterization and reactivity of important iron-oxygen intermediates. Representative reactions initiated by these reactive intermediates as well as some context from prior decades will also be presented. We will discuss the fundamental mechanistic features of these transformations and delineate the underlying structural and electronic factors that contribute to the spectrum of reactivities that has been observed in nature as well as those that have been invented using these paradigms. Given the recent developments in biocatalysis for non-natural chemistries and the renaissance of radical chemistry in organic synthesis, we envision that new enzymatic and synthetic transformations will emerge based on the radical processes mediated by metalloproteins and their synthetic analogs.

A new look at the role of thiolate ligation in cytochrome P450

Protonated ferryl (or iron(IV)hydroxide) intermediates have been characterized in several thiolate-ligated heme proteins that are known to catalyze C-H bond activation. The basicity of the ferryl intermediates in these species has been proposed to play a critical role in facilitating this chemistry, allowing hydrogen abstraction at reduction potentials below those that would otherwise lead to oxidative degradation of the enzyme. In this contribution, we discuss the events that led to the assignment and characterization of the unusual iron(IV)hydroxide species, highlighting experiments that provided a quantitative measure of the ferryl basicity, the iron(IV)hydroxide pKa. We then turn to the importance of the iron(IV)hydroxide state, presenting a new way of looking at the role of thiolate ligation in these systems.

Spectroscopic Investigations of Catalase Compound II: Characterization of an Iron(IV) Hydroxide Intermediate in a Non-thiolate-Ligated Heme Enzyme

We report on the protonation state of Helicobacter pylori catalase compound II. UV/visible, Mössbauer, and X-ray absorption spectroscopies have been used to examine the intermediate from pH 5 to 14. We have determined that HPC-II exists in an iron(IV) hydroxide state up to pH 11. Above this pH, the iron(IV) hydroxide complex transitions to a new species (pKa = 13.1) with Mössbauer parameters that are indicative of an iron(IV)-oxo intermediate. Recently, we discussed a role for an elevated compound II pKa in diminishing the compound I reduction potential. This has the effect of shifting the thermodynamic landscape toward the two-electron chemistry that is critical for catalase function. In catalase, a diminished potential would increase the selectivity for peroxide disproportionation over off-pathway one-electron chemistry, reducing the buildup of the inactive compound II state and reducing the need for energetically expensive electron donor molecules.

Setting an upper limit on the myoglobin iron(IV)hydroxide pK(a): insight into axial ligand tuning in heme protein catalysis

To provide insight into the iron(IV)hydroxide pK(a) of histidine ligated heme proteins, we have probed the active site of myoglobin compound II over the pH range of 3.9-9.5, using EXAFS, Mössbauer, and resonance Raman spectroscopies. We find no indication of ferryl protonation over this pH range, allowing us to set an upper limit of 2.7 on the iron(IV)hydroxide pK(a) in myoglobin. Together with the recent determination of an iron(IV)hydroxide pK(a) ∼ 12 in the thiolate-ligated heme enzyme cytochrome P450, this result provides insight into Nature's ability to tune catalytic function through its choice of axial ligand.

Geometric and electronic structures of the His-Fe(IV)=O and His-Fe(IV)-Tyr hemes of MauG

Biosynthesis of the tryptophan tryptophylquinone (TTQ) cofactor activates the enzyme methylamine dehydrogenase. The diheme enzyme MauG catalyzes O-atom insertion and cross-linking of two Trp residues to complete TTQ synthesis. Solution optical and Mössbauer spectroscopic studies have indicated that the reactive form of MauG during turnover is an unusual bisFe(IV) intermediate, which has been formulated as a His-ligated ferryl heme [Fe(IV)=O] (heme A), and an Fe(IV) heme with an atypical His/Tyr ligation (heme B). In this study, Fe K-edge X-ray absorption spectroscopy and extended X-ray absorption fine structure studies have been combined with density functional theory (DFT) and time-dependent DFT methods to solve the geometric and electronic structures of each heme site in the MauG bisFe(IV) redox state. The ferryl heme site (heme A) is compared with the well-characterized compound I intermediate of cytochrome c peroxidase. Heme B is unprecedented in biology, and is shown to have a six-coordinate, S = 1 environment, with a short (1.85-Å) Fe-O(Tyr) bond. Experimentally calibrated DFT calculations are used to reveal a strong covalent interaction between the Fe and the O(Tyr) ligand of heme B in the high-valence form. A large change in the Fe-O(Tyr) bond distance on going from Fe(II) (2.02 Å) to Fe(III) (1.89 Å) to Fe(IV) (1.85 Å) signifies increasing localization of spin density on the tyrosinate ligand upon sequential oxidation of heme B to Fe(IV). As such, O(Tyr) plays an active role in attaining and stabilizing the MauG bisFe(IV) redox state.

Characterization of dye-decolorizing peroxidases from Rhodococcus jostii RHA1

The soil bacterium Rhodococcus jostii RHA1 contains two dye-decolorizing peroxidases (DyPs) named according to the subfamily they represent: DypA, predicted to be periplasmic, and DypB, implicated in lignin degradation. Steady-state kinetic studies of these enzymes revealed that they have much lower peroxidase activities than C- and D-type DyPs. Nevertheless, DypA showed 6-fold greater apparent specificity for the anthraquinone dye Reactive Blue 4 (k(cat)/K(m) = 12800 ± 600 M(-1) s(-1)) than either ABTS or pyrogallol, consistent with previously characterized DyPs. By contrast, DypB showed the greatest apparent specificity for ABTS (k(cat)/K(m) = 2000 ± 100 M(-1) s(-1)) and also oxidized Mn(II) (k(cat)/K(m) = 25.1 ± 0.1 M(-1) s(-1)). Further differences were detected using electron paramagnetic resonance (EPR) spectroscopy: while both DyPs contained high-spin (S = (5)/(2)) Fe(III) in the resting state, DypA had a rhombic high-spin signal (g(y) = 6.32, g(x) = 5.45, and g(z) = 1.97) while DypB had a predominantly axial signal (g(y) = 6.09, g(x) = 5.45, and g(z) = 1.99). Moreover, DypA reacted with H(2)O(2) to generate an intermediate with features of compound II (Fe(IV)═O). By contrast, DypB reacted with H(2)O(2) with a second-order rate constant of (1.79 ± 0.06) × 10(5) M(-1) s(-1) to generate a relatively stable green-colored intermediate (t(1/2) ∼ 9 min). While the electron absorption spectrum of this intermediate was similar to that of compound I of plant-type peroxidases, its EPR spectrum was more consistent with a poorly coupled protein-based radical than with an [Fe(IV)═O Por(•)](+) species. The X-ray crystal structure of DypB, determined to 1.4 Å resolution, revealed a hexacoordinated heme iron with histidine and a solvent species occupying axial positions. A solvent channel potentially provides access to the distal face of the heme for H(2)O(2). A shallow pocket exposes heme propionates to the solvent and contains a cluster of acidic residues that potentially bind Mn(II). Insight into the structure and function of DypB facilitates its engineering for the improved degradation of lignocellulose.

Nature of the ferryl heme in compounds I and II

Heme enzymes are ubiquitous in biology and catalyze a vast array of biological redox processes. The formation of high valent ferryl intermediates of the heme iron (known as Compounds I and Compound II) is implicated for a number of catalytic heme enzymes, but these species are formed only transiently and thus have proved somewhat elusive. In consequence, there has been conflicting evidence as to the nature of these ferryl intermediates in a number of different heme enzymes, in particular the precise nature of the bond between the heme iron and the bound oxygen atom. In this work, we present high resolution crystal structures of both Compound I and Compound II intermediates in two different heme peroxidase enzymes, cytochrome c peroxidase and ascorbate peroxidase, allowing direct and accurate comparison of the bonding interactions in the different intermediates. A consistent picture emerges across all structures, showing lengthening of the ferryl oxygen bond (and presumed protonation) on reduction of Compound I to Compound II. These data clarify long standing inconsistencies on the nature of the ferryl heme species in these intermediates.

B3LYP study on reduction mechanisms from O2 to H2O at the catalytic sites of fully reduced and mixed-valence bovine cytochrome c oxidases

Reduction mechanisms of oxygen molecule to water molecules in the fully reduced (FR) and mixed-valence (MV) bovine cytochrome c oxidases (CcO) have been systematically examined based on the B3LYP calculations. The catalytic cycle using four electrons and four protons has been also shown consistently. The MV CcO catalyses reduction to produce one water molecule, while the FR CcO catalyses to produce two water molecules. One water molecule is added into vacant space between His240 and His290 in the catalytic site. This water molecule constructs the network of hydrogen bonds of Tyr244, farnesyl ethyl, and Thr316 that is a terminal residue of the K-pathway. It plays crucial roles for the proton transfer to the dioxygen to produce the water molecules in both MV and FR CcOs. Tyr244 functions as a relay of the proton transfer from the K-pathway to the added water molecule, not as donors of a proton and an electron to the dioxygen. The reduction mechanisms of MV and FR CcOs are strictly distinguished. In the FR CcO, the Cu atom at the Cu(B) site maintains the reduced state Cu(I) during the process of formation of first water molecule and plays an electron storage. At the final stage of formation of first water molecule, the Cu(I) atom releases an electron to Fe-O. During the process of formation of second water molecule, the Cu atom maintains the oxidized state Cu(II). In contrast with experimental proposals, the K-pathway functions for formation of first water molecule, while the D-pathway functions for second water molecule. The intermediates, P(M), P(R), F, and O, obtained in this work are compared with those proposed experimentally.

Identification and structural characterization of heme binding in a novel dye-decolorizing peroxidase, TyrA

TyrA is a member of the dye-decolorizing peroxidase (DyP) family, a new family of heme-dependent peroxidase recently identified in fungi and bacteria. Here, we report the crystal structure of TyrA in complex with iron protoporphyrin (IX) at 2.3 A. TyrA is a dimer, with each monomer exhibiting a two-domain, alpha/beta ferredoxin-like fold. Both domains contribute to the heme-binding site. Co-crystallization in the presence of an excess of iron protoporphyrin (IX) chloride allowed for the unambiguous location of the active site and the specific residues involved in heme binding. The structure reveals a Fe-His-Asp triad essential for heme positioning, as well as a novel conformation of one of the heme propionate moieties compared to plant peroxidases. Structural comparison to the canonical DyP family member, DyP from Thanatephorus cucumeris (Dec 1), demonstrates conservation of this novel heme conformation, as well as residues important for heme binding. Structural comparisons with representative members from all classes of the plant, bacterial, and fungal peroxidase superfamily demonstrate that TyrA, and by extension the DyP family, adopts a fold different from all other structurally characterized heme peroxidases. We propose that a new superfamily be added to the peroxidase classification scheme to encompass the DyP family of heme peroxidases.

EPR and ENDOR studies of cryoreduced compounds II of peroxidases and myoglobin. Proton-coupled electron transfer and protonation status of ferryl hemes

The nature of the [Fe(IV)-O] center in hemoprotein Compounds II has recently received considerable attention, as several experimental and theoretical investigations have suggested that this group is not necessarily the traditionally assumed ferryl ion, [Fe(IV)=O]2+, but can be the protonated ferryl, [Fe(IV)-OH]3+. We show here that cryoreduction of the EPR-silent Compound II by gamma-irradiation at 77 K produces Fe(III) species retaining the structure of the precursor [Fe(IV)=O]2+ or [Fe(IV)-OH]3+, and that the properties of the cryogenerated species provide a report on structural features and the protonation state of the parent Compound II when studied by EPR and 1H and 14N ENDOR spectroscopies. To give the broadest view of the properties of Compounds II we have carried out such measurements on cryoreduced Compounds II of HRP, Mb, DHP and CPO and on CCP Compound ES. EPR and ENDOR spectra of cryoreduced HRP II, CPO II and CCP ES are characteristic of low-spin hydroxy-Fe(III) heme species. In contrast, cryoreduced "globins", Mb II, Hb II, and DHP II, show EPR spectra having lower rhombicity. In addition the cryogenerated ferric "globin" species display strongly coupled exchangeable (1)H ENDOR signals, with A max approximately 20 MHz and a iso approximately 14 MHz, both substantially greater than for hydroxide/water ligand protons. Upon annealing at T > 180 K the cryoreduced globin compounds II relax to the low-spin hydroxy-ferric form with a solvent kinetic isotope effect, KIE > 6. The results presented here together with published resonance Raman and Mossbauer data suggest that the high-valent iron center of globin and HRP compounds II, as well as of CCP ES, is [Fe(IV)=O]2+, and that its cryoreduction produces [Fe(III)-O]+. Instead, as proposed by Green and co-workers, CPO II contains [Fe(IV)-OH]3+ which forms [Fe(III)-OH]2+ upon radiolysis. The [Fe(III)-O]+ generated by cryoreduction of HRP II and CCP ES protonate at 77 K, presumably because the heme is linked to a distal-pocket hydrogen bonding/proton-delivery network through an H-bond to the "oxide" ligand. The data also indicate that Mb and HRP compounds II exist as two major conformational substates.

X-ray absorption spectroscopic characterization of a cytochrome P450 compound II derivative

The cytochrome P450 enzyme CYP119, its compound II derivative, and its nitrosyl complex were studied by iron K-edge x-ray absorption spectroscopy. The compound II derivative was prepared by reaction of the resting enzyme with peroxynitrite and had a lifetime of approximately 10 s at 23 degrees C. The CYP119 nitrosyl complex was prepared by reaction of the enzyme with nitrogen monoxide gas or with a nitrosyl donor and was stable at 23 degrees C for hours. Samples of CYP119 and its derivatives were studied by x-ray absorption spectroscopy at temperatures below 140 (K) at the Advanced Photon Source of Argonne National Laboratory. The x-ray absorption near-edge structure spectra displayed shifts in edge and pre-edge energies consistent with increasing effective positive charge on iron in the series native CYP119 < CYP119 nitrosyl complex < CYP119 compound II derivative. Extended x-ray absorption fine structure spectra were simulated with good fits for k = 12 A(-1) for native CYP119 and k = 13 A(-1) for both the nitrosyl complex and the compound II derivative. The important structural features for the compound II derivative were an iron-oxygen bond length of 1.82 A and an iron-sulfur bond length of 2.24 A, both of which indicate an iron-oxygen single bond in a ferryl-hydroxide, Fe(IV)OH, moiety.

All-Metal Aromatic Complexes Show High Reactivity in the Oxidation Reaction of Methane and Some Hydrocarbons

The C-H activations of methane, ethane, propane, and propene catalyzed by all-metal aromatic complexes Al(4)Fe were investigated. The results reveal that the rate-determining barrier of methane activation reaction with Al(4)Fe is lower than that of both some well-known inorganic catalysts and some metal organic catalysts. It was found that the all-metal aromatic complexes have high reactivity for the C-H activation of ethane, propane, and propene. Further research showed that the ability of all-metal aromatic complex to accept an electron and the degree of electron delocalization on its aromatic plane had obvious influences on the reactivity of Al(4)Fe. The present work predicts a new kind of catalyst for the alkyl C-H activation reaction: all-metal aromatic catalyst.

Electronic Structure of Bispidine Iron(IV) Oxo Complexes

The electronic structure, based on DFT calculations, of a range of FeIV=O complexes with two tetra- (L1 and L2) and two isomeric pentadentate bispidine ligands (L3 and L4) is discussed with special emphasis on the relative stability of the two possible spin states (S = 1, triplet, intermediate-spin, and S = 2, quintet, high-spin; bispidines are very rigid diazaadamantane-derived 3,7-diazabicyclo[3.3.1]nonane ligands with two tertiary amine and two or three pyridine donors, leading to cis-octahedral [(X)(L)FeIV=O]2+ complexes, where X = NCCH3, OH2, OH-, and pyridine, and where X = pyridine is tethered to the bispidine backbone in L3, L4). The two main structural effects are a strong trans influence, exerted by the oxo group in both the triplet and the quintet spin states, and a Jahn-Teller-type distortion in the plane perpendicular to the oxo group in the quintet state. Due to the ligand architecture the two sites for substrate coordination in complexes with the tetradentate ligands L1 and L2 are electronically very different, and with the pentadentate ligands L3 and L4, a single isomer is enforced in each case. Because of the rigidity of the bispidine ligands and the orientation of the "Jahn-Teller axis", which is controlled by the sixth donor X, the Jahn-Teller-type distortion in the high-spin state of the two isomers is quite different. It is shown how this can be used as a design principle to tune the relative stability of the two spin states.

Spectroscopic description of an unusual protonated ferryl species in the catalase from Proteus mirabilis and density functional theory calculations on related models. Consequences for the ferryl protonation state in catalase, peroxidase and chloroperoxidase

The catalase from Proteus mirabilis peroxide-resistant bacteria is one of the most efficient heme-containing catalases. It forms a relatively stable compound II. We were able to prepare samples of compound II from P. mirabilis catalase enriched in (57)Fe and to study them by spectroscopic methods. Two different forms of compound II, namely, low-pH compound II (LpH II) and high-pH compound II (HpH II), have been characterized by Mössbauer, extended X-ray absorption fine structure (EXAFS) and UV-vis absorption spectroscopies. The proportions of the two forms are pH-dependent and the pH conversion between HpH II and LpH II is irreversible. Considering (1) the Mössbauer parameters evaluated for four related models by density functional theory methods, (2) the existence of two different Fe-O(ferryl) bond lengths (1.80 and 1.66 A) compatible with our EXAFS data and (3) the pH dependence of the alpha band to beta band intensity ratio in the absorption spectra, we attribute the LpH II compound to a protonated ferryl Fe(IV)-OH complex (Fe-O approximately 1.80 A), whereas the HpH II compound corresponds to the classic ferryl Fe(IV)=O complex (Fe=O approximately 1.66 A). The large quadrupole splitting value of LpH II (measured 2.29 mm s(-1) vs. computed 2.15 mm s(-1)) compared with that of HpH II (measured 1.47 mm s(-1) vs. computed 1.46 mm s(-1)) reflects the protonation of the ferryl group. The relevancy and involvement of such (Fe(IV)=O/Fe(IV)-OH) species in the reactivity of catalase, peroxidase and chloroperoxidase are discussed.

Resonance Raman spectroscopy of chloroperoxidase compound II provides direct evidence for the existence of an iron(IV)-hydroxide

We report direct evidence for the existence of an iron(IV)-hydroxide. Resonance Raman measurements on chloroperoxidase compound II (CPO-II) reveal an isotope ((18)O and (2)H)-sensitive band at nu(Fe-O) = 565 cm(-1). Preparation of CPO-II in H(2)O using H(2)(18)O(2) results in a red-shift of 22 cm(-1), while preparation of CPO-II in (2)H(2)O using H(2)O(2) results in a red-shift of 13 cm(-1). These values are in good agreement with the isotopic shifts predicted (23 and 12 cm(-1), respectively) for an Fe-OH harmonic oscillator. The measured Fe-O stretching frequency is also in good agreement with the 1.82-A Fe-O bond reported for CPO-II. A Badger's rule analysis of this distance provides an Fe-O stretching frequency of nu(Badger) = 563 cm(-1). We also present X-band electron nuclear double resonance (ENDOR) data for cryoreduced CPO-II. Cryogenic reduction (77 K) of the EPR-silent Fe(IV)OH center in CPO-II results in an EPR-active Fe(III)OH species with a strongly coupled (13.4 MHz) exchangeable proton. Based on comparisons with alkaline myoglobin, we assign this resonance to the hydroxide proton of cryoreduced CPO-II.

The status of high-valent metal oxo complexes in the P450 cytochromes

The oxidative prowess of the P450 cytochromes in physiological reactions is attributed to the production of a high-valent iron-oxo complex, or Compound I intermediate, in the reaction cycle. Despite many years of study, however, the full electronic description of this fleeting intermediate still remains an active area of study. In this manuscript, the current status of the isolation and characterization of the P450 oxo-Fe(IV) is examined and compared to analogous states in related heme enzymes. In addition, the utilization of cofactor exchange to stabilize high-valent oxo-states in the P450 is addressed. Structural and spectroscopic studies on manganese reconstituted P450, and its corresponding oxo-complex, are presented.

Stalking intermediates in oxygen activation by iron enzymes: motivation and method

The study of high-valent-iron enzyme intermediates began in the mid-1900s with the discovery of compounds I (or ES) and II in the heme peroxidases, progressed to non-heme-diiron enzymes in the 1990s with the detection and characterization of the Fe(III)-Fe(IV) complex, X, and the Fe(IV)-Fe(IV) complex, Q, in O(2) activation by ribonucleotide reductase R2 (RNR-R2) and soluble methane monooxygenase (sMMO), respectively, and was most recently extended to mononuclear non-heme-iron oxygenases with the trapping and spectroscopic characterization of the Fe(IV)-oxo intermediate, J, in the reaction of taurine:alpha-ketoglutarate dioxygenase (TauD). Individually, each of these landmark studies helped reveal the chemical logic of that particular enzyme system. Collectively, they have significantly advanced our understanding of Nature's strategies for oxidative transformation of biomolecules (both natural and "xenobiotic"). With high-valent complexes now having been described in representatives of three major classes of iron enzymes, it is an appropriate time to ask whether and what additional insights might be gleaned from further stalking of related intermediates in other systems. In this review, we advocate that there is still much to be learned from this pursuit and summarize the insight provided by two of the landmark discoveries mentioned above (the latter two) and the subsequent studies that they spurred to support our contention. In addition, we attempt to provide, to the extent that it is possible to do so, a "how-to" guide for detection and characterization of such intermediates, focusing primarily on enzymes in which they form by activation of molecular oxygen. In this latter objective, we have drawn from an earlier review by Johnson (Enzymes, third ed. vol. 20, 1992, pp. 1-61) covering, more generally, dissection of enzyme reaction pathways by transient-state kinetic methods. That work elegantly illustrated that, although it may be impossible to develop a true algorithm for the process, a synthesis of guidelines and general principles can be of considerable value.

On the status of ferryl protonation

We examine the issue of ferryl protonation in heme proteins. An analysis of the results obtained from X-ray crystallography, resonance Raman spectroscopy, and extended X-ray absorption spectroscopy (EXAFS) is presented. Fe-O bond distances obtained from all three techniques are compared using Badger's rule. The long Fe-O bond lengths found in the ferryl crystal structures of myoglobin, cytochrome c peroxidase, horseradish peroxidase, and catalase deviate substantially from the values predict by Badger's rule, while the oxo-like distances obtained from EXAFS measurements are in good agreement with the empirical formula. Density functional calculations, which suggest that Mössbauer spectroscopy can be used to determine ferryl protonation states, are presented. Our calculations indicate that the quadrupole splitting (DeltaE(Q)) changes significantly upon ferryl protonation. New resonance Raman data for horse-heart myoglobin compound II (Mb-II, pH 4.5) are also presented. An Fe-O stretching frequency of 790cm(-1) (shifting to 754cm(-1) with (18)O substitution) was obtained. This frequency provides a Badger distance of r(Fe-O)=1.66A. This distance is in agreement with the 1.69A Fe-O bond distance obtained from EXAFS measurements but is significantly shorter than the 1.93A bond found in the crystal structure of Mb-II (pH 5.2). In light of the available evidence, we conclude that the ferryl forms of myoglobin (pKa4), horseradish peroxidase (pKa4), cytochrome c peroxidase (pKa4), and catalase (pKa7) are not basic. They are authentic Fe(IV)oxos with Fe-O bonds on the order of 1.65A.

High-valent iron complexes with tetraamido macrocyclic ligands: structures, Mössbauer spectroscopy, and DFT calculations

Iron complexes of tetraamido macrocyclic ligands (TAML) are unique synthetic oxidation catalysts. In general, the central Fe(III) ion (S=3/2) is surrounded by four, almost planar, deprotonated amide-N sigma-donors although the full suite with new generation systems includes some substitution of amides with related donor functionalities. Oxidation under different conditions affords a variety of high-valent forms of iron-TAMLs. This review provides a summary and discussion of structural and spectroscopic features of complexes oxidized by one equivalent above the ferric state. These comprise Fe(IV)-TAML high spin (S=2) and intermediate spin (S=1) systems, wherein the oxidation equivalent can be taken from the metal (Fe(IV)) or the ligand (TAML radical-cation Fe(III)), and coupled spin (S=0) systems of mu-oxoiron(IV) dimers. The discussion is principally based on data obtained by X-ray crystallography, Mössbauer spectroscopy, and density functional theory calculations.

The protonation status of compound II in myoglobin, studied by a combination of experimental data and quantum chemical calculations: quantum refinement

Treatment of met-myoglobin (FeIII) with H2O2 gives rise to ferryl myoglobin, which is closely related to compound II in peroxidases. Experimental studies have given conflicting results for this species. In particular, crystallographic and extended x-ray absorption fine-structure data have shown either a short (approximately 170 pm) or a longer (approximately 190 pm) Fe-O bond, indicating either a double or a single bond. We here present a combined experimental and theoretical investigation of this species. In particular, we use quantum refinement to re-refine a crystal structure with a long bond, using 12 possible states of the active site. The states differ in the formal oxidation state of the iron ion and in the protonation of the oxygen ligand (O2-, OH-, or H2O) and the distal histidine residue (with a proton on Ndelta1, Nepsilon2, or on both atoms). Quantum refinement is essentially standard crystallographic refinement, where the molecular-mechanics potential, normally used to supplement the experimental data, is replaced by a quantum chemical calculation. Thereby, we obtain an accurate description of the active site in all the different protonation and oxidation states, and we can determine which of the 12 structures fit the experimental data best by comparing the crystallographic R-factors, electron-density maps, strain energies, and deviation from the ideal structure. The results indicate that FeIII OH- and FeIV OH- fit the experimental data almost equally well. These two states are appreciably better than the standard model of compound II, FeIV O2-. Combined with the available spectroscopic data, this indicates that compound II in myoglobin is protonated and is best described as FeIV OH-. It accepts a hydrogen bond from the distal His, which may be protonated at low pH.

Oxoiron(IV) in Chloroperoxidase Compound II Is Basic: Implications for P450 Chemistry

With the use of x-ray absorption spectroscopy, we have found that the Fe-O bond in chloroperoxidase compound II (CPO-II) is much longer than expected for an oxoiron(IV) (ferryl) unit; notably, the experimentally determined bond length of 1.82(1) A accords closely with density functional calculations on a protonated ferryl (Fe(IV)-OH, 1.81 A). The basicity of the CPO-II ferryl [pKa > 8.2 (where Ka is the acid dissociation constant)] is attributable to strong electron donation by the axial thiolate. We suggest that the CPO-II protonated ferryl is a good model for the rebound intermediate in the P450 oxygenation cycle;with elevated pKa values after one-electron reduction, thiolate-ligated ferryl radicals are competent to oxygenate saturated hydrocarbons at potentials that can be tolerated by folded polypeptide hosts.

Crystallographic and spectroscopic characterization of a nonheme Fe(IV)-O complex

Following the heme paradigm, it is often proposed that dioxygen activation by nonheme monoiron enzymes involves an iron(IV)=oxo intermediate that is responsible for the substrate oxidation step. Such a transient species has now been obtained from a synthetic complex with a nonheme macrocyclic ligand and characterized spectroscopically. Its high-resolution crystal structure reveals an iron-oxygen bond length of 1.646(3) angstroms, demonstrating that a terminal iron(IV)=oxo unit can exist in a nonporphyrin ligand environment and lending credence to proposed mechanisms of nonheme iron catalysis.

Calculation of the electronic structure and spectra of model cytochrome P450 compound I

The electronic structure and spectra of the oxyferryl (Fe=O) compound I P450 heme species, the transient putative active intermediate of cytochrome P450s, have been calculated employing a full protoporphyrin IX heme model representation. The principal aim of this work was to compare the computed spectra of this species with the observed transient spectra attributed to it. Computations were made using both nonlocal density functional theory (DFT) and semiempirical INDO/CI methods to characterize the electronic structure of the compound I P450 species. Both methods resulted in a similar antiferromagnetic doublet as the ground state with a ferromagnetic quartet excited state partner, slightly higher in energy. The INDO/ROHF/CI semiempirical method was used to calculate the spectrum of the protoporphyrin IX P450 compound I heme species in its lowest energy antiferromagnetic doublet state at the DFT optimized geometry. As a reference, the spectrum of the ferric resting form of the protoporphyrin IX P450 heme species was also calculated. The computed shifts in the Soret and Q bands of compound I relative to the resting state were both in good agreement with the corresponding experimentally observed shifts in the transient spectra of cytochrome P450cam (Biochem. Biophys. Res. Commun. 201 (1994) 1464) and chloroperoxidase (Biochem. Biophys. Res. Commun. 94 (1980) 1123) both ascribed to their common compound I heme site. This consistency provides additional, independent support for the assignment of compound I as the origin of the reported observed transient spectra.

Generation of oxoiron (IV) tetramesitylporphyrin pi-cation radical complexes by m-CPBA oxidation of ferric tetramesitylporphyrin derivatives in butyronitrile at - 78 degrees C. Evidence for the formation of six-coordinate oxoiron (IV) tetramesitylporphyrin pi-cation radical complexes FeIV = O(tmp*)X (X = Cl-, Br-), by Mössbauer and X-ray absorption spectroscopy

The generation of six-coordinate oxoiron (IV) tetramesitylporphyrin pi-caption radical complexes by m-CPBA (meta-chloroperbenzoic acid) oxidation of ferric tetramesitylporphyrin derivatives in butyronitrile at - 78 degrees C was investigated. UV-Vis and EPR spectroscopies indicate that the axial ligand present in the ferric starting derivatives is retained in the high-valent iron complexes. Indirect evidence for the formation of six-coordinate oxoiron (IV) tetramesitylporphyrin complexes FeIV = O(tmp*)X (X=Cl-, Br-) by m-CPBA oxidation of FeX(tmp) (X=Cl-, Br-) in butyronitrile at - 78 degrees C was also obtained by Mössbauer spectroscopy. Direct confirmation of the presence of a halide ion as second axial ligand of iron in these high-valent iron species was obtained by X-ray absorption spectroscopy. The EXAFS spectra of the samples obtained by m-CPBA oxidation of FeX(tmp) (X=Cl-, Br-) were refined using two different coordination models including both four porphyrinato-nitrogens and the axial oxo group. The two models include (model I) or exclude (model II) the axial halogen. The statistical tests indicate the presence of a halide ion as second axial ligand of iron in both derivatives. The refinements led to the following bond distances: FeIV=O(tmp*)Cl(3):Fe-O=1.66(1),Fe-Cl=2.39(2) and Fe-Np=1.99(1) A;FeIV=O(tmp*)Br(4):Fe-O=1.65(1),Fe-Br=2.93(2), Fe-Np=2.02(1) A. The lengthening of the Fe-X(X=Cl-, Br-) distances relative to those occurring in the ferric precursor porphyrins is, most probably, related to the strong trans influence of the oxoiron(IV) fragment present in 3 or 4.

The structure of heme proteins Compounds I and II: some misconceptions

Many reactions catalyzed by heme proteins involve an oxidation of the heme to one or two equivalents above the ferric state. Such intermediates are often referred to as Compound II and Compound I, respectively. Several different notations are used in the literature to describe the chemical structures of these compounds, which has led to errors and misinterpretations. The main problems are: 1. For many biochemists the notations X - FeIV = O and X - Fe + = O are equivalent and are used interchangeably, whereas other biochemists interpret these notations to have quite different meanings. 2. It is inaccurate and misleading to illustrate the increased oxidation state of Compound I by just adding two positive charges to the structure. 3. The bond between the oxygen and iron is not a conventional double bond and illustrating it as such leads to misconceptions concerning its properties. 4. In several instances, including horseradish peroxidase Compound I, there is reason to doubt that the radical moiety of the porphyrin ring (or of the protein in other peroxidases) carries a positive charge. The purpose of this article is to promote the use of uniform, as well as chemically correct, formulae and equations in describing the structures and reactivities of Compounds I and II. To accomplish this, a new notation is proposed for the iron-oxygen bond in these compounds.

Ferryl intermediates of catalase captured by time-resolved Weissenberg crystallography and UV-VIS spectroscopy

Various enzymes use semi-stable ferryl intermediates and free radicals during their catalytic cycle, amongst them haem catalases. Structures for two transient intermediates (compounds I and II) of the NADPH-dependent catalase from Proteus mirabilis (PMC) have been determined by time-resolved X-ray crystallography and single crystal microspectrophotometry. The results show the formation and transformation of the ferryl group in the haem, and the unexpected binding of an anion during this reaction at a site distant from the haem.

Laue diffraction study on the structure of cytochrome c peroxidase compound I

BACKGROUND

Cytochrome c peroxidase from yeast is a soluble haem-containing protein found in the mitochondrial electron transport chain where it probably protects against toxic peroxides. The aim of this study was to obtain a reliable structure for the doubly oxidized transient intermediate (termed compound I) in the reaction of cytochrome c peroxidase with hydrogen peroxide. This intermediate contains a semistable free radical on Trp191, and an oxyferryl haem group.

RESULTS

Compound I was produced in crystals of yeast cytochrome c peroxidase by reacting the crystalline enzyme with hydrogen peroxide in a flow cell. The reaction was monitored by microspectrophotometry and Laue crystallography in separate experiments. A nearly complete conversion to compound I was achieved within two minutes of the addition of hydrogen peroxide, and the concentration of the intermediate remained at similar levels for an additional half an hour. The structure of the intermediate was determined by Laue diffraction. The refined Laue structure for compound I shows clear structural changes at the peroxide-binding site but no significant changes at the radical site. The photographs were processed with a new software package (LEAP), overcoming many of the former problems encountered in extracting structural information from Laue exposures.

CONCLUSIONS

The geometry of the haem environment in this protein allows structural changes to be extremely small, similar in magnitude to those observed for the Fe2+/Fe3+ transition in cytochrome c. The results suggest that these molecules have evolved to transfer electrons with a minimal need for structural adjustment.

Human cobalophilin: the structure of bound methylcobalamin and a functional role in protecting methylcobalamin from photolysis

The interactions of methylcobalamin with cobalophilin from human serum were analyzed using extended X-ray absorption fine structure (EXAFS) spectroscopy, photolysis of the cobalt-carbon bond of methylcobalamin, and a pKa determination of the protonation of the coordinated nitrogen of 5,6-dimethylbenzimidazole (DMB). These results are consistent with the idea that the DMB nitrogen is still coordinated when protein is bound; however, the ability of a methyl radical (generated by photolysis) to escape the geminate cage of the protein is considerably reduced. For methylcobalamin in solution, the DMB nitrogen ligand is at a distance of 2.20 +/- 0.03 A from cobalt [Sagi, I., & Chance, M. R. (1992) J. Am. Chem. Soc. 114, 8061-8066]. This distance to the lower axial ligand does not change when protein binds (2.20 +/- 0.04 A), nor do the optical spectra exhibit any base-off character. The average of the distance from cobalt to the four equatorial nitrogens of the corrin plane is also unchanged. The pKa for the conversion of the "base-on" to the "base-off" form of methylcobalamin, where the above DMB nitrogen becomes protonated and the Co-N axial bond is cleaved, does not deviate from the free cobalamin value of 2.7 when methylcobalamin is bound to cobalophilin. These results indicate that replacement of the DMB ligand with a ligand from the protein is unlikely. Although the background-subtracted EXAFS data sets for free methylcobalamin and for the protein complex are extremely similar, more accurate data with explicit higher shell analysis would be required to entirely rule out ligand replacement. The chemical and electronic nature of the ligand changes little.(ABSTRACT TRUNCATED AT 250 WORDS)

An extended X-ray absorption fine structure investigation of the structure of the active site of lactoperoxidase

Native lactoperoxidase, compound III, and the reduced forms (at pH 6 and 9) were studied using X-ray absorption spectroscopy (XAS). Native lactoperoxidase has four pyrrole nitrogen ligands at an average distance of 2.04 +/- 0.01 A, a proximal ligand at 1.91 +/- 0.02 A, and a sixth (distal) ligand at 2.16 +/- 0.03 A. Lactoperoxidase native enzyme has a first coordination shell structure that is similar to that of native lignin peroxidase [Sinclair, R., Yamazaki, I., Bumpus, J., Brock, B., Chang, C.-S., Albo, A., & Powers, L. (1992) Biochemistry 31, 4892-4900] and different from that of horseradish peroxidase [Chance, B., Powers, L., Ching, Y., Poulos, T., Schonbaum, G., Yamazaki, I., & Paul, K. (1984) Arch. Biochem. Biophys. 235, 596-611]. Similarly, lactoperoxidase compound III resembles lignin peroxidase compound III. The five-coordinated ferrous form was stable at pH 9, but at pH 6 it was rapidly converted to the six-coordinated form with a distal ligand at 2.18 +/- 0.03 A. No evidence typical of changes in spin state was obtained at the different pH values.

Formation of a square-planar Co(I) B12 intermediate. Implications for enzyme catalysis

X-ray edge and extended x-ray absorption fine structure (EXAFS) techniques provide powerful tools for analysis of local molecular structure of complexes in solution. We present EXAFS results for Co(I) B12 that demonstrate a four-coordinate (distorted) square-planar configuration. Comparison of EXAFS solutions for Co(I) and Co(II) B12 (collected previously; Sagi et al. 1990. J. Am. Chem. Soc. 112:8639-8644) suggest that modulation of the Co-N bond to the axial 5,6-dimethylbenzimidazole (DMB), in the absence of changes in Co-N (equatorial) bond distances, may be a key mechanism in promoting homolytic versus heterolytic cleavage. As Co-C bond homolysis occurs, the Co-N (DMB) bond becomes stronger. However, for heterolytic cleavage to occur, earlier electrochemical studies (D. Lexa and J. M. Saveant. 1976. J. Am. Chem. Soc. 98:2652-2658) and recent studies of methylcobalamin-dependent Clostridium thermoaceticum (Ragsdale et al. 1987. J. Biol. Chem. 262:14289-14297) suggest that removal of the DMB ligand (before Co-C bond cleavage) favors formation of the four-coordinate square-planar Co(I) species while inhibiting formation of the five-coordinate Co(II) B12 complex. This paper presents the first direct evidence that formation of the Co(I) B12 intermediate must involve breaking of the Co-N (DMB) bond.

Structure of the active site of lignin peroxidase isozyme H2: native enzyme, compound III, and reduced form

The wood-degrading fungus Phanerochaete chrysosporium secretes a number of extracellular enzymes called lignin peroxidases which are involved in the degradation of both lignin and a number of persistent environmental pollutants. Lignin peroxidase isozyme H2, a glycosylated protein of approximately 40 kDa, contains a single heme. X-ray absorption spectroscopy (XAS) has been used to probe the local environment of the iron in the active site of resting enzyme, reduced enzyme, and compound III. For the native and reduced forms, respectively, the average Fe-pyrrole nitrogen distances are 2.055 and 2.02 A (+/- 0.015 A); the Fe-proximal nitrogen distance is 1.93 and 1.91 A (+/- 0.02 A) while the Fe-distal ligand distance is 2.17 and 2.10 A (+/- 0.03 A). Although the results are not as well-defined, the active-site structure of compound III is largely 2.02 +/- 0.015 A for the average Fe-pyrrole nitrogen distance, 1.90 +/- 0.02 for the Fe-proximal nitrogen, and 1.74 +/- 0.03 A for the Fe-distal ligand distance. The heme iron-pyrrole nitrogen distance is more expanded in ligninase H2 than in other peroxidases. The possible significance of this is discussed in relation to other heme proteins.