Electron-transfer reactions of the reductase component of soluble methane monooxygenase from Methylococcus capsulatus (Bath)

Batch Production of High-Quality Graphene Grids for Cryo-EM: Cryo-EM Structure of Methylococcus capsulatus Soluble Methane Monooxygenase Hydroxylase

Cryogenic electron microscopy (cryo-EM) has become a widely used tool for determining the protein structure. Despite recent technical advances, sample preparation remains a major bottleneck for several reasons, including protein denaturation at the air-water interface, the presence of preferred orientations, nonuniform ice layers, etc. Graphene, a two-dimensional allotrope of carbon consisting of a single atomic layer, has recently gained attention as a near-ideal support film for cryo-EM that can overcome these challenges because of its superior properties, including mechanical strength and electrical conductivity. Here, we introduce a reliable, easily implemented, and reproducible method to produce 36 graphene-coated grids within 1.5 days. To demonstrate their practical application, we determined the cryo-EM structure of Methylococcus capsulatus soluble methane monooxygenase hydroxylase (sMMOH) at resolutions of 2.9 and 2.5 Å using Quantifoil and graphene-coated grids, respectively. We found that the graphene-coated grid has several advantages, including a smaller amount of protein required and avoiding protein denaturation at the air-water interface. By comparing the cryo-EM structure of sMMOH with its crystal structure, we identified subtle yet significant geometrical changes at the nonheme diiron center, which may better indicate the active site configuration of sMMOH in the resting/oxidized state.

Electron Transfer to Hydroxylase through Component Interactions in Soluble Methane Monooxygenase

The hydroxylation of methane (CH₄) is crucial to the field of environmental microbiology, owing to the heat capacity of methane, which is much higher than that of carbon dioxide (CO₂). Soluble methane monooxygenase (sMMO), a member of the bacterial multicomponent monooxygenase (BMM) superfamily, is essential for the hydroxylation of specific substrates, including hydroxylase (MMOH), regulatory component (MMOB), and reductase (MMOR). The diiron active site positioned in the MMOH α-subunit is reduced through the interaction of MMOR in the catalytic cycle. The electron transfer pathway, however, is not yet fully understood due to the absence of complex structures with reductases. A type II methanotroph, Methylosinus sporium 5, successfully expressed sMMO and hydroxylase, which were purified for the study of the mechanisms. Studies on the MMOH-MMOB interaction have demonstrated that Tyr76 and Trp78 induce hydrophobic interactions through π-π stacking. Structural analysis and sequencing of the ferredoxin domain in MMOR (MMOR-Fd) suggested that Tyr93 and Tyr95 could be key residues for electron transfer. Mutational studies of these residues have shown that the concentrations of flavin adenine dinucleotide (FAD) and iron ions are changed. The measurements of dissociation constants (K_ds) between hydroxylase and mutated reductases confirmed that the binding affinities were not significantly changed, although the specific enzyme activities were significantly reduced by MMOR-Y93A. This result shows that Tyr93 could be a crucial residue for the electron transfer route at the interface between hydroxylase and reductase.

Ferritin-Like Proteins: A Conserved Core for a Myriad of Enzyme Complexes

Ferritin-like proteins share a common fold, a four α-helix bundle core, often coordinating a pair of metal ions. Although conserved, the ferritin fold permits a diverse set of reactions, and is central in a multitude of macromolecular enzyme complexes. Here, we emphasize this diversity through three members of the ferritin-like superfamily: the soluble methane monooxygenase, the class I ribonucleotide reductase and the aldehyde deformylating oxygenase. They all rely on dinuclear metal cofactors to catalyze different challenging oxygen-dependent reactions through the formation of multi-protein complexes. Recent studies using cryo-electron microscopy, serial femtosecond crystallography at an X-ray free electron laser source, or single-crystal X-ray diffraction, have reported the structures of the active protein complexes, and revealed unprecedented insights into the molecular mechanisms of these three enzymes.

Catalytic and spectroscopic properties of the halotolerant soluble methane monooxygenase reductase from Methylomonas methanica MC09

The soluble methane monooxygenase receives electrons from NADH via its reductase MmoC for oxidation of methane, which is itself an attractive C1 building block for a future bioeconomy. Herein, we present biochemical and spectroscopic insights into the reductase from the marine methanotroph Methylomonas methanica MC09. The presence of a flavin adenine dinucleotide (FAD) and [2Fe2S] cluster as its prosthetic group were revealed by reconstitution experiments, iron determination and electron paramagnetic resonance spectroscopy. As a true halotolerant enzyme, MmoC still showed 50 % of its specific activity at 2 M NaCl. We show that MmoC produces only trace amounts of superoxide, but mainly hydrogen peroxide during uncoupled turnover reactions. The characterization of a highly active reductase is an important step for future biotechnological applications of a halotolerant sMMO.

Elucidation of the electron transfer environment in the MMOR FAD-binding domain from Methylosinus sporium 5

By facilitating electron transfer to the hydroxylase diiron center, MMOR-a reductase-serves as an essential component of the catalytic cycle of soluble methane monooxygenase. Here, the X-ray structure analysis of the FAD-binding domain of MMOR identified crucial residues and its influence on the catalytic cycle.

EPR-derived structures of flavin radical and iron-sulfur clusters from Methylosinus sporium 5 reductase

The electronic structures of two cofactors, the FAD radical and [2Fe–2S]⁺ of reduced MMOR from Methylosinus sporium strain 5 were investigated by advanced EPR spectroscopy. The findings provide long overdue detailed structural information of MMOR.

MMOD-induced structural changes of hydroxylase in soluble methane monooxygenase

Soluble methane monooxygenase in methanotrophs converts methane to methanol under ambient conditions. The maximum catalytic activity of hydroxylase (MMOH) is achieved through the interplay of its regulatory protein (MMOB) and reductase. An additional auxiliary protein, MMOD, functions as an inhibitor of MMOH; however, its inhibitory mechanism remains unknown. Here, we report the crystal structure of the MMOH-MMOD complex from Methylosinus sporium strain 5 (2.6 Å). Its structure illustrates that MMOD associates with the canyon region of MMOH where MMOB binds. Although MMOD and MMOB recognize the same binding site, each binding component triggers different conformational changes toward MMOH, which then respectively lead to the inhibition and activation of MMOH. Particularly, MMOD binding perturbs the di-iron geometry by inducing two major MMOH conformational changes, i.e., MMOH β subunit disorganization and subsequent His¹⁴⁷ dissociation with Fe1 coordination. Furthermore, 1,6-hexanediol, a mimic of the products of sMMO, reveals the substrate access route.

Biocatalytic Oxidations of Substrates through Soluble Methane Monooxygenase from Methylosinus sporium 5

Methane, an important greenhouse gas, has a 20-fold higher heat capacity than carbon dioxide. Earlier, through advanced spectroscopy and structural studies, the mechanisms underlying the extremely stable C–H activation of soluble methane monooxygenase (sMMO) have been elucidated in Methylosinus trichosporium OB3b and Methylococcus capsulatus Bath. Here, sMMO components—including hydroxylase (MMOH), regulatory (MMOB), and reductase (MMOR)—were expressed and purified from a type II methanotroph, Methylosinus sporium strain 5 (M. sporium 5), to characterize its hydroxylation mechanism. Two molar equivalents of MMOB are necessary to achieve catalytic activities and oxidized a broad range of substrates including alkanes, alkenes, halogens, and aromatics. Optimal activities were observed at pH 7.5 for most substrates possibly because of the electron transfer environment in MMOR. Substitution of MMOB or MMOR from another type II methanotroph, Methylocystis species M, retained specific enzyme activities, demonstrating the successful cross-reactivity of M. sporium 5. These results will provide fundamental information for further enzymatic studies to elucidate sMMO mechanisms.

Alkane Oxidation: Methane Monooxygenases, Related Enzymes, and Their Biomimetics

Methane monooxygenases (MMOs) mediate the facile conversion of methane into methanol in methanotrophic bacteria with high efficiency under ambient conditions. Because the selective oxidation of methane is extremely challenging, there is considerable interest in understanding how these enzymes carry out this difficult chemistry. The impetus of these efforts is to learn from the microbes to develop a biomimetic catalyst to accomplish the same chemical transformation. Here, we review the progress made over the past two to three decades toward delineating the structures and functions of the catalytic sites in two MMOs: soluble methane monooxygenase (sMMO) and particulate methane monooxygenase (pMMO). sMMO is a water-soluble three-component protein complex consisting of a hydroxylase with a nonheme diiron catalytic site; pMMO is a membrane-bound metalloenzyme with a unique tricopper cluster as the site of hydroxylation. The metal cluster in each of these MMOs harnesses O₂ to functionalize the C-H bond using different chemistry. We highlight some of the common basic principles that they share. Finally, the development of functional models of the catalytic sites of MMOs is described. These efforts have culminated in the first successful biomimetic catalyst capable of efficient methane oxidation without overoxidation at room temperature.

Coupling Oxygen Consumption with Hydrocarbon Oxidation in Bacterial Multicomponent Monooxygenases

A fundamental goal in catalysis is the coupling of multiple reactions to yield a desired product. Enzymes have evolved elegant approaches to address this grand challenge. A salient example is the biological conversion of methane to methanol catalyzed by soluble methane monooxygenase (sMMO), a member of the bacterial multicomponent monooxygenase (BMM) superfamily. sMMO is a dynamic protein complex of three components: a hydroxylase, a reductase, and a regulatory protein. The active site, a carboxylate-rich non-heme diiron center, is buried inside the 251 kDa hydroxylase component. The enzyme processes four substrates: O2, protons, electrons, and methane. To couple O2 activation to methane oxidation, timely control of substrate access to the active site is critical. Recent studies of sMMO, as well as its homologues in the BMM superfamily, have begun to unravel the mechanism. The emerging and unifying picture reveals that each substrate gains access to the active site along a specific pathway through the hydroxylase. Electrons and protons are delivered via a three-amino-acid pore located adjacent to the diiron center; O2 migrates via a series of hydrophobic cavities; and hydrocarbon substrates reach the active site through a channel or linked set of cavities. The gating of these pathways mediates entry of each substrate to the diiron active site in a timed sequence and is coordinated by dynamic interactions with the other component proteins. The result is coupling of dioxygen consumption with hydrocarbon oxidation, avoiding unproductive oxidation of the reductant rather than the desired hydrocarbon. To initiate catalysis, the reductase delivers two electrons to the diiron(III) center by binding over the pore of the hydroxylase. The regulatory component then displaces the reductase, docking onto the same surface of the hydroxylase. Formation of the hydroxylase-regulatory component complex (i) induces conformational changes of pore residues that may bring protons to the active site; (ii) connects hydrophobic cavities in the hydroxylase leading from the exterior to the diiron active site, providing a pathway for O2 and methane, in the case of sMMO, to the reduced diiron center for O2 activation and substrate hydroxylation; (iii) closes the pore, as well as a channel in the case of four-component BMM enzymes, restricting proton access to the diiron center during formation of "Fe2O2" intermediates required for hydrocarbon oxidation; and (iv) inhibits undesired electron transfer to the Fe2O2 intermediates by blocking reductase binding during O2 activation. This mechanism is quite different from that adopted by cytochromes P450, a large class of heme-containing monooxygenases that catalyze reactions very similar to those catalyzed by the BMM enzymes. Understanding the timed enzyme control of substrate access has implications for designing artificial catalysts. To achieve multiple turnovers and tight coupling, synthetic models must also control substrate access, a major challenge considering that nature requires large, multimeric, dynamic protein complexes to accomplish this feat.

Component interactions and electron transfer in toluene/o-xylene monooxygenase

The multicomponent protein toluene/o-xylene monooxygenase (ToMO) activates molecular oxygen to oxidize aromatic hydrocarbons. Prior to dioxygen activation, two electrons are injected into each of two diiron(III) units of the hydroxylase, a process that involves three redox active proteins: the ToMO hydroxylase (ToMOH), Rieske protein (ToMOC), and an NADH oxidoreductase (ToMOF). In addition to these three proteins, a small regulatory protein is essential for catalysis (ToMOD). Through steady state and pre-steady state kinetics studies, we show that ToMOD attenuates electron transfer from ToMOC to ToMOH in a concentration-dependent manner. At substoichiometric concentrations, ToMOD increases the rate of turnover, which we interpret to be a consequence of opening a pathway for oxygen transport to the catalytic diiron center in ToMOH. Excess ToMOD inhibits steady state catalysis in a manner that depends on ToMOC concentration. Through rapid kinetic assays, we demonstrate that ToMOD attenuates formation of the ToMOC-ToMOH complex. These data, coupled with protein docking studies, support a competitive model in which ToMOD and ToMOC compete for the same binding site on the hydroxylase. These results are discussed in the context of other studies of additional proteins in the superfamily of bacterial multicomponent monooxygenases.

Electron transfer control in soluble methane monooxygenase

The hydroxylation or epoxidation of hydrocarbons by bacterial multicomponent monooxygenases (BMMs) requires the interplay of three or four protein components. How component protein interactions control catalysis, however, is not well understood. In particular, the binding sites of the reductase components on the surface of their cognate hydroxylases and the role(s) that the regulatory proteins play during intermolecular electron transfer leading to the hydroxylase reduction have been enigmatic. Here we determine the reductase binding site on the hydroxylase of a BMM enzyme, soluble methane monooxygenase (sMMO) from Methylococcus capsulatus (Bath). We present evidence that the ferredoxin domain of the reductase binds to the canyon region of the hydroxylase, previously determined to be the regulatory protein binding site as well. The latter thus inhibits reductase binding to the hydroxylase and, consequently, intermolecular electron transfer from the reductase to the hydroxylase diiron active site. The binding competition between the regulatory protein and the reductase may serve as a control mechanism for regulating electron transfer, and other BMM enzymes are likely to adopt the same mechanism.

Diiron oxidation state control of substrate access to the active site of soluble methane monooxygenase mediated by the regulatory component

The regulatory component (MMOB) of soluble methane monooxygenase (sMMO) has a unique N-terminal tail not found in regulatory proteins of other bacterial multicomponent monooxygenases. This N-terminal tail is indispensable for proper function, yet its solution structure and role in catalysis remain elusive. Here, by using double electron–electron resonance (DEER) spectroscopy, we show that the oxidation state of the hydroxylase component, MMOH, modulates the conformation of the N-terminal tail in the MMOH–2MMOB complex, which in turn facilitates catalysis. The results reveal that the N-terminal tail switches from a relaxed, flexible conformational state to an ordered state upon MMOH reduction from the diiron(III) to the diiron(II) state. This observation suggests that some of the crystallographically observed allosteric effects that result in the connection of substrate ingress cavities in the MMOH–2MMOB complex may not occur in solution in the diiron(III) state. Thus, O₂ may not have easy access to the active site until after reduction of the diiron center. The observed conformational change is also consistent with a higher binding affinity of MMOB to MMOH in the diiron(II) state, which may allow MMOB to displace more readily the reductase component (MMOR) from MMOH following reduction.

Peroxide-shunt substrate-specificity for the Salmonella typhimurium O2-dependent tRNA modifying monooxygenase (MiaE)

Post-transcriptional modifications of tRNA are made to structurally diversify tRNA. These modifications alter noncovalent interactions within the ribosomal machinery, resulting in phenotypic changes related to cell metabolism, growth, and virulence. MiaE is a carboxylate bridged, nonheme diiron monooxygenase, which catalyzes the O2-dependent hydroxylation of a hypermodified-tRNA nucleoside at position 37 (2-methylthio-N(6)-isopentenyl-adenosine(37)-tRNA) [designated ms(2)i(6)A37]. In this work, recombinant MiaE was cloned from Salmonella typhimurium , purified to homogeneity, and characterized by UV-visible and dual-mode X-band EPR spectroscopy for comparison to other nonheme diiron enzymes. Additionally, three nucleoside substrate-surrogates (i(6)A, Cl(2)i(6)A, and ms(2)i(6)A) and their corresponding hydroxylated products (io(6)A, Cl(2)io(6)A, and ms(2)io(6)A) were synthesized to investigate the chemo- and stereospecificity of this enzyme. In the absence of the native electron transport chain, the peroxide-shunt was utilized to monitor the rate of substrate hydroxylation. Remarkably, regardless of the substrate (i(6)A, Cl(2)i(6)A, and ms(2)i(6)A) used in peroxide-shunt assays, hydroxylation of the terminal isopentenyl-C4-position was observed with >97% E-stereoselectivity. No other nonspecific hydroxylation products were observed in enzymatic assays. Steady-state kinetic experiments also demonstrate that the initial rate of MiaE hydroxylation is highly influenced by the substituent at the C2-position of the nucleoside base (v0/[E] for ms(2)i(6)A > i(6)A > Cl(2)i(6)A). Indeed, the >3-fold rate enhancement exhibited by MiaE for the hydroxylation of the free ms(2)i(6)A nucleoside relative to i(6)A is consistent with previous whole cell assays reporting the ms(2)io(6)A and io(6)A product distribution within native tRNA-substrates. This observation suggests that the nucleoside C2-substituent is a key point of interaction regulating MiaE substrate specificity.

Aging-associated enzyme human clock-1: substrate-mediated reduction of the diiron center for 5-demethoxyubiquinone hydroxylation

The mitochondrial membrane-bound enzyme Clock-1 (CLK-1) extends the average longevity of mice and Caenorhabditis elegans, as demonstrated for Δclk-1 constructs for both organisms. Such an apparent impact on aging and the presence of a carboxylate-bridged diiron center in the enzyme inspired this work. We expressed a soluble human CLK-1 (hCLK-1) fusion protein with an N-terminal immunoglobulin binding domain of protein G (GB1). Inclusion of the solubility tag allowed for thorough characterization of the carboxylate-bridged diiron active site of the resulting GB1-hCLK-1 by spectroscopic and kinetic methods. Both UV-visible and Mössbauer experiments provide unambiguous evidence that GB1-hCLK-1 functions as a 5-demethoxyubiquinone-hydroxylase, utilizing its carboxylate-bridged diiron center. The binding of DMQn (n = 0 or 2) to GB1-hCLK-1 mediates reduction of the diiron center by nicotinamide adenine dinucleotide (NADH) and initiates O2 activation for subsequent DMQ hydroxylation. Deployment of DMQ to mediate reduction of the diiron center in GB1-hCLK-1 improves substrate specificity and diminishes consumption of NADH that is uncoupled from substrate oxidation. Both Vmax and kcat/KM for DMQ hydroxylation increase when DMQ0 is replaced by DMQ2 as the substrate, which demonstrates that an isoprenoid side chain enhances enzymatic hydroxylation and improves catalytic efficiency.

Oxidation reactions performed by soluble methane monooxygenase hydroxylase intermediates H(peroxo) and Q proceed by distinct mechanisms

Soluble methane monooxygenase is a bacterial enzyme that converts methane to methanol at a carboxylate-bridged diiron center with exquisite control. Because the oxidizing power required for this transformation is demanding, it is not surprising that the enzyme is also capable of hydroxylating and epoxidizing a broad range of hydrocarbon substrates in addition to methane. In this work we took advantage of this promiscuity of the enzyme to gain insight into the mechanisms of action of H(peroxo) and Q, two oxidants that are generated sequentially during the reaction of reduced protein with O(2). Using double-mixing stopped-flow spectroscopy, we investigated the reactions of the two intermediate species with a panel of substrates of varying C-H bond strength. Three classes of substrates were identified according to the rate-determining step in the reaction. We show for the first time that an inverse trend exists between the rate constant of reaction with H(peroxo) and the C-H bond strength of the hydrocarbon examined for those substrates in which C-H bond activation is rate-determining. Deuterium kinetic isotope effects revealed that reactions performed by Q, but probably not H(peroxo), involve extensive quantum mechanical tunneling. This difference sheds light on the observation that H(peroxo) is not a sufficiently potent oxidant to hydroxylate methane, whereas Q can perform this reaction in a facile manner. In addition, the reaction of H(peroxo) with acetonitrile appears to proceed by a distinct mechanism in which a cyanomethide anionic intermediate is generated, bolstering the argument that H(peroxo) is an electrophilic oxidant that operates via two-electron transfer chemistry.

Recombinant expression, purification, and characterization of ThmD, the oxidoreductase component of tetrahydrofuran monooxygenase

Tetrahydrofuran monooxygenase (Thm) catalyzes the NADH-and oxygen-dependent hydroxylation of tetrahydrofuran to 2-hydroxytetrahydrofuran. Thm is composed of a hydroxylase enzyme, a regulatory subunit, and an oxidoreductase named ThmD. ThmD was expressed in Escherichia coli as a fusion to maltose-binding protein (MBP) and isolated to homogeneity after removal of the MBP. Purified ThmD contains covalently bound FAD, [2Fe-2S] center, and was shown to use ferricyanide, cytochrome c, 2,6-dichloroindophenol, and to a lesser extent, oxygen as surrogate electron acceptors. ThmD displays 160-fold preference for NADH over NADPH and functions as a monomer. The flavin-binding domain of ThmD (ThmD-FD) was purified and characterized. ThmD-FD displayed similar activity as the full-length ThmD and showed a unique flavin spectrum with a major peak at 463nm and a small peak at 396 nm. Computational modeling and mutagenesis analyses suggest a novel three-dimensional fold or covalent flavin attachment in ThmD.

Revisiting the mechanism of dioxygen activation in soluble methane monooxygenase from M. capsulatus (Bath): evidence for a multi-step, proton-dependent reaction pathway

Stopped-flow kinetic investigations of soluble methane monooxygenase (sMMO) from M. capsulatus (Bath) have clarified discrepancies that exist in the literature regarding several aspects of catalysis by this enzyme. The development of thorough kinetic analytical techniques has led to the discovery of two novel oxygenated iron species that accumulate in addition to the well-established intermediates H(peroxo) and Q. The first intermediate, P*, is a precursor to H(peroxo) and was identified when the reaction of reduced MMOH and MMOB with O(2) was carried out in the presence of >or=540 microM methane to suppress the dominating absorbance signal due to Q. The optical properties of P* are similar to those of H(peroxo), with epsilon(420) = 3500 M(-1) cm(-1) and epsilon(720) = 1250 M(-1) cm(-1). These values are suggestive of a peroxo-to-iron(III) charge-transfer transition and resemble those of peroxodiiron(III) intermediates characterized in other carboxylate-bridged diiron proteins and synthetic model complexes. The second identified intermediate, Q*, forms on the pathway of Q decay when reactions are performed in the absence of hydrocarbon substrate. Q* does not react with methane, forms independently of buffer composition, and displays a unique shoulder at 455 nm in its optical spectrum. Studies conducted at different pH values reveal that rate constants corresponding to P* decay/H(peroxo) formation and H(peroxo) decay/Q formation are both significantly retarded at high pH and indicate that both events require proton transfer. The processes exhibit normal kinetic solvent isotope effects (KSIEs) of 2.0 and 1.8, respectively, when the reactions are performed in D(2)O. Mechanisms are proposed to account for the observations of these novel intermediates and the proton dependencies of P* to H(peroxo) and H(peroxo) to Q conversion.

Products from enzyme-catalyzed oxidations of norcarenes

Recent studies revealed that norcarane (bicyclo[4.1.0]heptane) is oxidized to 2-norcarene (bicyclo[4.1.0]-hept-2-ene) and 3-norcarene (bicyclo[4.1.0]hept-3-ene) by iron-containing enzymes and that secondary oxidation products from the norcarenes complicate mechanistic probe studies employing norcarane as the substrate (Newcomb, M.; Chandrasena, R. E. P.; Lansakara-P., D. S. P.; Kim, H.-Y.; Lippard, S. J.; Beauvais, L. G.; Murray, L. J.; Izzo, V.; Hollenberg, P. F.; Coon, M. J. J. Org. Chem. 2007, 72, 1121-1127). In the present work, the product profiles from the oxidations of 2-norcarene and 3-norcarene by several enzymes were determined. Most of the products were identified by GC and GC-mass spectral comparison to authentic samples produced independently; in some cases, stereochemical assignments were made or confirmed by 2D NMR analysis of the products. The enzymes studied in this work were four cytochrome P450 enzymes, CYP2B1, CYPDelta2E1, CYPDelta2E1 T303A, and CYPDelta2B4, and three diiron-containing enzymes, soluble methane monooxygenase (sMMO) from Methylococcus capsulatus (Bath), toluene monooxygenase (ToMO) from Pseudomonas stutzeri OX1, and phenol hydroxylase (PH) from Pseudomonas stutzeri OX1. The oxidation products from the norcarenes identified in this work are 2-norcaranone, 3-norcaranone, syn- and anti-2-norcarene oxide, syn- and anti-3-norcarene oxide, syn- and anti-4-hydroxy-2-norcarene, syn- and anti-2-hydroxy-3-norcarene, 2-oxo-3-norcarene, 4-oxo-2-norcarene, and cyclohepta-3,5-dienol. Two additional, unidentified oxidation products were observed in low yields in the oxidations. In matched oxidations, 3-norcarene was a better substrate than 2-norcarene in terms of turnover by factors of 1.5-15 for the enzymes studied here. The oxidation products found in enzyme-catalyzed oxidations of the norcarenes are useful for understanding the complex product mixtures obtained in norcarane oxidations.

Intermolecular electron-transfer reactions in soluble methane monooxygenase: a role for hysteresis in protein function

Electron transfer from reduced nicotinamide adenine dinucleotide (NADH) to the hydroxylase component (MMOH) of soluble methane monooxygenase (sMMO) primes its non-heme diiron centers for reaction with dioxygen to generate high-valent iron intermediates that convert methane to methanol. This intermolecular electron-transfer step is facilitated by a reductase (MMOR), which contains [2Fe-2S] and flavin adenine dinucleotide (FAD) prosthetic groups. To investigate interprotein electron transfer, chemically reduced MMOR was mixed rapidly with oxidized MMOH in a stopped-flow apparatus, and optical changes associated with reductase oxidation were recorded. The reaction proceeds via four discrete kinetic phases corresponding to the transfer of four electrons into the two dinuclear iron sites of MMOH. Pre-equilibrating the hydroxylase with sMMO auxiliary proteins MMOB or MMOD severely diminishes electron-transfer throughput from MMOR, primarily by shifting the bulk of electron transfer to the slowest pathway. The biphasic reactions for electron transfer to MMOH from several MMOR ferredoxin analogues are also inhibited by MMOB and MMOD. These results, in conjunction with the previous finding that MMOB enhances electron-transfer rates from MMOR to MMOH when preformed MMOR-MMOH-MMOB complexes are allowed to react with NADH [Gassner, G. T.; Lippard, S. J. Biochemistry 1999, 38, 12768-12785], suggest that isomerization of the initial ternary complex is required for maximal electron-transfer rates. To account for the slow electron transfer observed for the ternary precomplex in this work, a model is proposed in which conformational changes imparted to the hydroxylase by MMOR are retained throughout the catalytic cycle. Several electron-transfer schemes are discussed with emphasis on those that invoke multiple interconverting MMOH populations.

Reactions of the diiron(IV) intermediate Q in soluble methane monooxygenase with fluoromethanes

Soluble methane monooxygenases utilize a carboxylate-bridged diiron center and dioxygen to convert methane to methanol. A diiron(IV) oxo intermediate Q is the active species for this process. Alternative substrates and theoretical studies can help elucidate the mechanism. Experimental results for reactions with derivatized methanes were previously modeled by a combination of quantum mechanical/molecular mechanical techniques and the model was extended to predict the relative reactivity of fluoromethane. We therefore studied reactions of Q with CF(n)H(4-n) (n=1-3) to test the prediction. The kinetics of single-turnover reactions of Q with these substrates were monitored by double-mixing stopped-flow optical spectroscopy. For fluoro- and difluoromethane, conversion to the alcohols occurred with second-order rate constants less than that of methane, the values being 28,700 (CH4)>25,000 (CFH3)>9300 (CF2H2) M(-1) s(-1). KIE values for C-H versus C-D activation above the classical limit were observed, requiring modification of the theoretical predictions.

Substrate radical intermediates in soluble methane monooxygenase

EPR spin-trapping experiments were carried out using the three-component soluble methane monooxygenase (MMO). Spin-traps 5,5-dimethyl-1-pyrroline N-oxide (DMPO), alpha-4-pyridyl-1-oxide N-tert-butylnitrone (POBN), and nitrosobenzene (NOB) were used to investigate the possible formation of substrate radical intermediates during catalysis. In contrast to a previous report, the NADH-coupled oxidations of various substrates did not produce any trapped radical species when DMPO or POBN was present. However, radicals were detected by these traps when only the MMO reductase component and NADH were present. DMPO and POBN were found to be weak inhibitors of the MMO reaction. In contrast, NOB is a strong inhibitor for the MMO-catalyzed nitrobenzene oxidation reaction. When NOB was used as a spin-trap in the complete MMO system with or without substrate, EPR signals from an NOB radical were detected. We propose that a molecule of NOB acts simultaneously as a substrate and a spin-trap for MMO, yielding the long-lived radical and supporting a stepwise mechanism for MMO.

Domain engineering of the reductase component of soluble methane monooxygenase from Methylococcus capsulatus (Bath)

Soluble methane monooxygenase (sMMO) from Methylococcus capsulatus (Bath) is a three-component enzyme system that catalyzes the conversion of methane to methanol. A reductase (MMOR), which contains [2Fe-2S] and FAD cofactors, facilitates electron transfer from NADH to the hydroxylase diiron active sites where dioxygen activation and substrate hydroxylation take place. By separately expressing the ferredoxin (MMORFd, MMOR residues 1-98) and FAD/NADH (MMOR-FAD, MMOR residues 99-348) domains of the reductase, nearly all biochemical properties of full-length MMOR are retained, except for interdomain electron transfer rates. To investigate the extent to which rapid electron transfer between domains might be restored and further to explore the modularity of MMOR, MMOR-Fd and MMOR-FAD were connected in a non-native fashion. Four different linker sequences were employed to create MMOR reversed-domain (MMOR-RD) constructs, MMOR(99-342)-linker-MMOR(2-98), with a domain connectivity observed in other homologous oxidoreductases. The optical, redox, and electron transfer properties of the four MMOR-RD proteins were characterized and compared with those of wild-type MMOR. The linker sequence plays a key role in controlling solvent accessibility to the FAD cofactor, as evidenced by perturbed flavin optical spectra, decreased FADox/FADsq redox potentials, and increased steady-state oxidase activities in three of the constructs. Stopped-flow optical spectroscopy revealed slow interdomain electron transfer (k < 0.04 s(-1) at 4 degrees C, compared with 90 s(-1) for wild-type MMOR) for all three MMOR-RD proteins with 7-residue linkers. A long (14-residue), flexible linker afforded much faster electron transfer between the FAD and [2Fe-2S] cofactors (k = 0.9 s(-1) at 4 degrees C).

Structural features of covalently cross-linked hydroxylase and reductase proteins of soluble methane monooxygenase as revealed by mass spectrometric analysis

Soluble methane monooxygenase requires complexes between its three component proteins for efficient catalysis. The hydroxylase (MMOH) must bind both to the reductase (MMOR) and to the regulatory protein (MMOB) to facilitate oxidation of methane to methanol. Although structures of MMOH, MMOB, and one domain of MMOR have been determined, less geometric information is available for the complexes. To address this deficiency, MMOH and MMOR were cross-linked by a carbodiimide reagent and analyzed by specific proteolysis, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, and capillary high performance liquid chromatography mass spectrometry. Tandem mass spectra conclusively identified two amine-to-carboxylate cross-linked sites involving the alpha subunit of MMOH and the [2Fe-2S] domain of MMOR (MMOR-Fd). In particular, the N terminus of the MMOH alpha subunit forms cross-links to the side chains of MMOR-Fd residues Glu-56 and Glu-91. These Glu residues are close to one another on the surface of MMOR-Fd and >25 A from the [2Fe-2S] cluster. Because the N terminus of the alpha subunit of MMOH was not located in the crystal structure of MMOH, a detailed structural model of the complex based on the cross-link was precluded; however, a previously proposed binding site for MMOR on MMOH could be ruled out. Based on the cross-linking results, a MMOR E56Q/E91Q double mutant was generated. The mutant retains >80% of MMOR NADH oxidase activity but reduces sMMO activity to approximately 65% of the level supported by the wild type reductase. Cross-linking to MMOH was diminished but not abolished in the double mutant, indicating that other residues of MMOR also form cross-links to MMOH.

Soluble methane monooxygenase: activation of dioxygen and methane

The mechanisms by which soluble methane monooxygenase uses dioxygen to convert methane selectively to methanol have come into sharp focus. Diverse techniques have clarified subtle details about each step in the reaction, from binding and activating dioxygen, to hydroxylation of alkanes and other substrates, to the electron transfer events required to complete the catalytic cycle.

Quantum chemical studies of methane monooxygenase: comparision with P450

The catalytic pathways of soluble methane monooxygenase (sMMO) and cytochrome P450CAM, iron-containing enzymes, are described and compared. Recent extensive density functional ab initio electronic structure calculations have revealed many similarities in a number of the key catalytic steps, as well as some important differences. A particularly interesting and significant contrast is the role played by the protein in each system. For sMMO, the protein stabilizes various species in the catalytic cycle through a series of carboxylate shifts. This process is adequately described by a relatively compact model of the active site ( approximately 100 atoms), providing a reasonable description of the energetics of hydrogen atom abstraction. For P450CAM, in contrast, the inclusion of the full protein is necessary for an accurate description of the hydrogen atom abstraction.

Why OrfY? Characterization of MMOD, a long overlooked component of the soluble methane monooxygenase from Methylococcus capsulatus (Bath)

Soluble methane monooxygenase (sMMO) has been studied intensively to understand the mechanism by which it catalyzes the remarkable oxidation of methane to methanol. The cluster of genes that encode for the three characterized protein components of sMMO (MMOH, MMOB, and MMOR) contains an additional open reading frame (orfY) of unknown function. In the present study, MMOD, the protein encoded by orfY, was overexpressed as a fusion protein in Escherichia coli. Pure MMOD was obtained in high yields after proteolytic cleavage and a two-step purification procedure. Western blot analysis of Methylococcus capsulatus (Bath) soluble cell extracts showed that MMOD is expressed in the native organism although at significantly lower levels than the other sMMO proteins. The cofactorless MMOD protein is a potent inhibitor of sMMO activity and binds to the hydroxylase protein (MMOH) with an affinity similar to that of MMOB and MMOR. The addition of up to 2 MMOD per MMOH results in changes in the optical spectrum of the hydroxylase that suggest the formation of a (micro-oxo)diiron(III) center in a fraction of the MMOH-MMOD complexes. Possible functions for MMOD are discussed, including a role in the assembly of the MMOH diiron center similar to that suggested for DmpK, a protein that shares some properties with MMOD.