Transmembrane orientation of hydrophobic alpha-helices is regulated both by the relationship of helix length to bilayer thickness and by the cholesterol concentration

The Functionality of Membrane-Inserting Proteins and Peptides: Curvature Sensing, Generation, and Pore Formation

Proteins and peptides with hydrophobic and amphiphilic segments are responsible for many biological functions. The sensing and generation of membrane curvature are the functions of several protein domains or motifs. While some specific membrane proteins play an essential role in controlling the curvature of distinct intracellular membranes, others participate in various cellular processes such as clathrin-mediated endocytosis, where several proteins sort themselves at the neck of the membrane bud. A few membrane-inserting proteins form nanopores that permeate selective ions and water to cross the membrane. In addition, many natural and synthetic small peptides and protein toxins disrupt the membrane by inducing nonspecific pores in the membrane. The pore formation causes cell death through the uncontrolled exchange between interior and exterior cellular contents. In this article, we discuss the insertion depth and orientation of protein/peptide helices, and their role as a sensor and inducer of membrane curvature as well as a pore former in the membrane. We anticipate that this extensive review will assist biophysicists to gain insight into curvature sensing, generation, and pore formation by membrane insertion.

Origin of the nonlinear structural and mechanical properties in oppositely curved lipid mixtures

Structural and mechanical properties of membranes such as thickness, tail order, bending modulus and curvature energetics play crucial role in controlling various cellular functions that depend on the local lipid organization and membrane reshaping. While behavior of these biophysical properties are well understood in single component membranes, very little is known about how do they change in the mixed lipid membranes. Often various properties of the mixed lipid bilayers are assumed to change linearly with the mole fractions of the constituent lipids which, however, is true for "ideal" mixing only. In this study, using molecular dynamics simulations, we show that structural and mechanical properties of binary lipid mixture change nonlinearly with the lipid mole fractions, and the strength of the nonlinearity depends on two factors - spontaneous curvature difference and locally inhomogeneous interactions between the lipid components.

D-to-E and T19V Variants of the pH-Low Insertion Peptide and Their Doxorubicin Conjugates Interact with Membrane at Higher pH Ranges Than WT

To improve targeted cargo delivery to cancer cells, pH-Low Insertion Peptide (pHLIP) variants were developed to interact with the membrane at pH values higher than those of the WT. The Asp-to-Glu variants aim to increase side chain pKa without disturbing the sequence of protonations that underpin membrane insertion. The Thr19 variants represent efforts to perturb the critical Pro20 residue. To study the effect of cargo on pHLIP insertion, doxorubicin (Dox), a fluorescent antineoplastic drug, was conjugated to selected variants near the inserting C-terminus. Variants and conjugates were characterized on a POPC membrane using Trp and Dox fluorescence methods to define the entire pH range of insertion (pHinitial-pHfinal). Compared to WT with a pHi-pHf range of 6.7-5.6, D25E-D31E-D33E, D14E-D25E-D31E-D33E, and T19V-D25E variants demonstrated higher pHi-pHf ranges of 7.3-6.1, 7.3-6.3, and 8.2-5.4, respectively. The addition of Dox expanded the pHi-pHf range, mainly by shifting pHi to higher pH values (e.g., WT pHLIP-Dox has a pHi-pHf range of 7.7-5.2). Despite the low Hill coefficient observed for the conjugates, D14E-D25E-D31E-D33E pHLIP-Dox completed insertion by a pHf of 5.7. However, the Dox cargo remained in the hydrophobic membrane interior after pHLIP insertion, which may impede drug release. Finally, a logistic function can describe pHLIP insertion as a peripheral-to-TM (start-to-finish) two-state transition; wherever possible, we discuss data deviating from such sigmoidal fitting in support of the idea that pH-specific intermediate states distinct from the initial peripheral state and the final TM state exist at intervening pH values.

Length matters: Functional flip of the short TatA transmembrane helix

The twin arginine translocase (Tat) exports folded proteins across bacterial membranes. The putative pore-forming or membrane-weakening component (TatA_d in B. subtilis) is anchored to the lipid bilayer via an unusually short transmembrane α-helix (TMH), with less than 16 residues. Its tilt angle in different membranes was analyzed under hydrophobic mismatch conditions, using synchrotron radiation circular dichroism and solid-state NMR. Positive mismatch (introduced either by reconstitution in short-chain lipids or by extending the hydrophobic TMH length) increased the helix tilt of the TMH as expected. Negative mismatch (introduced either by reconstitution in long-chain lipids or by shortening the TMH), on the other hand, led to protein aggregation. These data suggest that the TMH of TatA is just about long enough for stable membrane insertion. At the same time, its short length is a crucial factor for successful translocation, as demonstrated here in native membrane vesicles using an in vitro translocation assay. Furthermore, when reconstituted in model membranes with negative spontaneous curvature, the TMH was found to be aligned parallel to the membrane surface. This intrinsic ability of TatA to flip out of the membrane core thus seems to play a key role in its membrane-destabilizing effect during Tat-dependent translocation.

Measuring Membrane Penetration Depths and Conformational Changes in Membrane Peptides and Proteins

The structural organization and dynamic nature of the biomembrane components are important determinants for numerous cellular functions. Particularly, membrane proteins are critically important for various physiological functions and are important drug targets. The mechanistic insights on the complex functionality of membrane lipids and proteins can be elucidated by understanding the interplay between structure and dynamics. In this regard, membrane penetration depth represents an important parameter to obtain the precise depth of membrane-embedded molecules that often define the conformation and topology of membrane probes and proteins. In this review, we discuss about the widely used fluorescence quenching-based methods (parallax method, distribution analysis, and dual-quencher analysis) to accurately determine the membrane penetration depths of fluorescent probes that are either membrane-embedded or attached to lipids and proteins. Further, we also discuss a relatively novel fluorescence quenching method that utilizes tryptophan residue as the quencher, namely the tryptophan-induced quenching, which is sensitive to monitor small-scale conformational changes (short distances of < 15 Å) and useful in mapping distances in proteins. We have provided numerous examples for the benefit of readers to appreciate the importance and applicability of these simple yet powerful methods to study membrane proteins.

Using cyclodextrin-induced lipid substitution to study membrane lipid and ordered membrane domain (raft) function in cells

Methods for efficient cyclodextrin-induced lipid exchange have been developed in our lab. These make it possible to almost completely replace the lipids in the outer leaflet of artificial membranes or the plasma membranes of living cells with exogenous lipids. Lipid replacement/substitution allows detailed studies of how lipid composition and asymmetry influence the structure and function of membrane domains and membrane proteins. In this review, we both summarize progress on cyclodextrin exchange in cells, mainly by the use of methyl-alpha cyclodextrin to exchange phospholipids and sphingolipids, and discuss the issues to consider when carrying out lipid exchange experiments upon cells. Issues that impact interpretation of lipid exchange are also discussed. This includes how overly naïve interpretation of how lipid exchange-induced changes in domain formation can impact protein function.

All-Atom Molecular Dynamics Elucidating Molecular Mechanisms of Single-Transmembrane Model Peptide Dimerization in a Lipid Bilayer

Protein-protein interactions between transmembrane helices are essential elements for membrane protein structures and functions. To understand the effects of peptide sequences and lipid compositions on these interactions, single-molecule experiments using model systems comprising artificial peptides and membranes have been extensively performed. However, their dynamic behavior at the atomic level remains largely unclear. In this study, we applied the all-atom molecular dynamics (MD) method to simulate the interactions of single-transmembrane helical peptide dimers in membrane environments, which has previously been analyzed by single-molecule experiments. The simulations were performed with two peptides (Ala- and Leu-based artificially designed peptides, termed "host peptide", and the host peptide added with the GXXXG motif, termed "GXXXG peptide"), two membranes (pure-POPC and POPC mixed with 30% cholesterols), and two dimer directions (parallel and antiparallel), consistent with those in the previous experiment. As a result, the MD simulations with parallel dimers reproduced the experimentally observed tendency that introducing cholesterols weakened the interactions in the GXXXG dimer and facilitated those in the host dimer. Our simulation suggested that the host dimer formed hydrogen bonds but the GXXXG dimer did not. However, some discrepancies were also observed between the experiments and simulations. Limitations in the space and time scales of simulations restrict the large-scale undulation and peristaltic motions of the membranes, resulting in differences in lateral pressure profiles. This effect could cause a discrepancy in the rotation angles of helices against the membrane normal.

Insight into the Mechanism of Action and Peptide-Membrane Interactions of Aib-Rich Peptides: Multitechnique Experimental and Theoretical Analysis

The increase in resistant bacterial strains necessitates the identification of new antimicrobial molecules. Antimicrobial peptides (AMPs) are an attractive option because of evidence that bacteria cannot easily develop resistance to AMPs. The peptaibols, a class of naturally occurring AMPs, have shown particular promise as antimicrobial drugs, but their development has been hindered by their mechanism of action not being clearly understood. To explore how peptaibols might interact with membranes, circular dichroism, vibrational circular dichroism, linear dichroism, Raman spectroscopy, Raman optical activity, neutron reflectivity and molecular dynamics simulations have been used to study a small library of peptaibol mimics, the Aib-rich peptides. All the peptides studied quickly partitioned and oriented in membranes, and we found evidence of chiral interactions between the phospholipids and membrane-embedded peptides. The protocols presented in this paper open new ground by showing how chiro-optical spectroscopies can throw light on the mechanism of action of AMPs.

Photogenerated Radical Pair between Flavin and a Tryptophan-Containing Transmembrane-Type Peptide in a Large Unilamellar Vesicle

Electron-transfer (ET) reactions in biological systems, such as those with magnetic sensors based on flavoproteins and electron transport at biomembrane interfaces, are interesting and important issues that require understanding. As a model system of flavoproteins in biomimetic environments, we report the dynamics of the radical pair generated by photoinduced ET between riboflavin tetrabutylate (RFTB) and tryptophan (Trp) residues in a transmembrane-type polypeptide, both of which are distributed in a large unilamellar vesicle of 1,2-dimyristoyl-sn-glycero-3-phosphocholine. The Trp residues locate near the hydrophilic membrane interface, as confirmed by a dual-fluorescence quenching assay. The fluorescence and transient absorption upon photoexcitation of RFTB indicate that ET from both the singlet and triplet excited states occurs at the hydrophilic interface, whereas the RFTB in the hydrophobic region does not contribute to ET. The ET efficiency and the magnetic field effect (MFE) on the RFTB anion increase significantly above the gel-to-liquid crystal phase transition temperature due to a decrease in microviscosity. The MFE analysis indicates that the radical pair generated from the triplet ET channel exhibits a long lifetime as those in micellar systems due to the strong cage effect of the vesicle.

Calcium-induced reversible assembly of phosphorylated amphiphile within lipid bilayer membranes

Inspired by calcium-induced reversible assembly and disassembly of membrane proteins found in nature, here we developed a phosphorylated amphiphile (PA) that contains an oligo(phenylene-ethynylene) unit as a hydrophobic unit and a phosphate ester group as a hydrophilic calcium-binding unit. We demonstrated that PA can assemble and disassemble in a reversible manner in response to the sequential addition of calcium chloride and ethylene-diaminetetraacetic acid within the lipid bilayer membranes for the first time as a synthetic molecule.

Intrinsic Structural Features of the Human IRE1α Transmembrane Domain Sense Membrane Lipid Saturation

Activation of inositol-requiring enzyme (IRE1α) is an indispensable step in remedying the cellular stress associated with lipid perturbation in the endoplasmic reticulum (ER) membrane. IRE1α is a single-spanning ER transmembrane protein possessing both kinase and endonuclease functions, and its activation can be fully achieved through the dimerization and/or oligomerization process. How IRE1α senses membrane lipid saturation remains largely unresolved. Using both computational and experimental tools, we systematically investigated the dimerization process of the transmembrane domain (TMD) of IRE1α and found that, with help of the serine 450 residue, the conserved tryptophan 457 residue buttresses the core dimerization interface of IRE1α-TMD. BiFC (bimolecular fluorescence complementation) experiments revealed that mutation on these residues abolished the saturated fatty acid-induced dimerization in the ER membrane and subsequently inactivated IRE1α activity in vivo. Therefore, our results suggest that the structural elements of IRE1α-TMD serve as a key sensor that detects membrane aberrancy.

Synthesis of Pyridoclax Analogues: Insight into Their Druggability by Investigating Their Physicochemical Properties and Interactions with Membranes

Pyridoclax is considered a promising anticancer drug, acting as a protein-protein interaction disruptor, with potential applications in the treatment of ovarian, lung, and mesothelioma cancers. Eighteen sensibly selected structural analogues of Pyridoclax were synthesized, and their physicochemical properties were systematically assessed and analyzed. Moreover, considering that drug-membrane interactions play an essential role in understanding the mode of action of a given drug and its eventual toxic effects, membrane models were used to investigate such interactions in bulk (liposomes) and at the air-water interface. The measured experimental data on all original oligopyridines allowed the assessment of relative differences in terms of physicochemical properties, which could be determinant for their druggability, and hence for drug development.

Topological analysis of the gp41 MPER on lipid bilayers relevant to the metastable HIV-1 envelope prefusion state

The membrane proximal external region (MPER) of HIV-1 envelope glycoprotein (gp) 41 is an attractive vaccine target for elicitation of broadly neutralizing antibodies (bNAbs) by vaccination. However, current details regarding the quaternary structural organization of the MPER within the native prefusion trimer [(gp120/41)₃] are elusive and even contradictory, hindering rational MPER immunogen design. To better understand the structural topology of the MPER on the lipid bilayer, the adjacent transmembrane domain (TMD) was appended (MPER-TMD) and studied. Membrane insertion of the MPER-TMD was sensitive both to the TMD sequence and cytoplasmic residues. Antigen binding of MPER-specific bNAbs, in particular 10E8 and DH511.2_K3, was significantly impacted by the presence of the TMD. Furthermore, MPER-TMD assembly into 10-nm diameter nanodiscs revealed a heterogeneous membrane array comprised largely of monomers and dimers, as enumerated by bNAb Fab binding using single-particle electron microscopy analysis, arguing against preferential trimeric association of native MPER and TMD protein segments. Moreover, introduction of isoleucine mutations in the C-terminal heptad repeat to induce an extended MPER α-helical bundle structure yielded an antigenicity profile of cell surface-arrayed Env variants inconsistent with that found in the native prefusion state. In line with these observations, electron paramagnetic resonance analysis suggested that 10E8 inhibits viral membrane fusion by lifting the MPER N-terminal region out of the viral membrane, mandating the exposure of residues that would be occluded by MPER trimerization. Collectively, our data suggest that the MPER is not a stable trimer, but rather a dynamic segment adapted for structural changes accompanying fusion.

Bilayer thickness determines the alignment of model polyproline helices in lipid membranes

Our understanding of protein folds relies fundamentally on the set of secondary structures found in the proteomes. Yet, there also exist intriguing structures and motifs that are underrepresented in natural biopolymeric systems. One example is the polyproline II helix, which is usually considered to have a polar character and therefore does not form membrane spanning sections of membrane proteins. In our work, we have introduced specially designed polyproline II helices into the hydrophobic membrane milieu and used 19F NMR to monitor the helix alignment in oriented lipid bilayers. Our results show that these artificial hydrophobic peptides can adopt several different alignment states. If the helix is shorter than the thickness of the hydrophobic core of the membrane, it is submerged into the bilayer with its long axis parallel to the membrane plane. The polyproline helix adopts a transmembrane alignment when its length exceeds the bilayer thickness. If the peptide length roughly matches the lipid thickness, a coexistence of both states is observed. We thus show that the lipid thickness plays a determining role in the occurrence of a transmembrane polyproline II helix. We also found that the adaptation of polyproline II helices to hydrophobic mismatch is in some notable aspects different from α-helices. Finally, our results prove that the polyproline II helix is a competent structure for the construction of transmembrane peptide segments, despite the fact that no such motif has ever been reported in natural systems.

Analyzing Transmembrane Protein and Hydrophobic Helix Topography by Dual Fluorescence Quenching

The location of fluorescent groups relative to the lipid bilayer can be evaluated using fluorescence quenchers embedded in the membrane and/or dissolved in aqueous solution. Quenching can be used to define the membrane topography of membrane proteins and individual membrane-embedded hydrophobic helices by combining it with the placement of fluorescent groups, including Trp, at defined sequence positions. This chapter briefly discusses various quenching methods for studies of membrane protein topography, and provides detailed protocols for dual quencher analysis (DQA), a rapid, highly sensitive, and experimentally flexible approach in which the information gained from both a membrane-embedded and aqueous quencher is combined. The advantages of the DQA method include flexibility with regard to the bilayer compositions to which it can be applied, including membranes composed of lipids of varying head group and acyl chain compositions, as well as the ability to identify mixed populations of fluorophores residing at different depths within the bilayer.

Phase Composition Control in Microsphere-Supported Biomembrane Systems

The popularization of studies in membrane protein lipid phase coexistence has prompted the development of new techniques to construct and study biomimetic systems with cholesterol-rich lipid microdomains. Here, microsphere-supported biomembranes with integrated α-helical peptides, referred to as proteolipobeads (PLBs), were used to model peptide/protein partitioning within DOPC/DPPC/cholesterol phase-separated membranes. Due to the appearance of compositional heterogeneity and impurities in the formation of model PLB assemblies, fluorescence-activated cell sorting (FACS) was used to characterize and sort PLB populations on the basis of disordered phase (Ld) content. In addition, spectral imaging was used to assess the partitioning of FITC-labeled α-helical peptide between fluorescently labeled Ld phase and unlabeled ordered phase (Lo) phase lipid microdomains. The apparent peptide partition coefficient, Kp,app, was measured to be 0.89 ± 0.06, indicating a slight preference of the peptide for the Lo phase. A biomimetic motif of the Lo phase concentration enhancement of the biotinyl-peptide ligand display in proteolipobeads was also observed. Finally, peptide mobility was measured by FRAP separately in each lipid phase, yielding diffusivities of 0.036 ± 0.005 and 0.014 ± 0.003 μm2/s in the Ld and Lo phases, respectively.

Highly Hydrophilic Segments Attached to Hydrophobic Peptides Translocate Rapidly across Membranes

Hydrophilic segments attached to transmembrane helices often cross membranes. In an increasing number of cases, it has become apparent that this occurs in a biologically relevant post-translational event. In this study, we investigate whether juxta-membrane (JM) hydrophilic sequences attached to hydrophobic helices are able to rapidly cross lipid bilayers via their ability or inability to block hydrophobic helix interconversion between a transmembrane (TM) and non-TM membrane-associated state. Interconversion was triggered by changing the protonation state of an Asp residue in the hydrophobic core of the peptides, and peptide configuration was monitored by the fluorescence of a Trp residue at the center of the hydrophobic sequence. In POPC vesicles, conversion of the TM to non-TM state at high pH and the non-TM to TM state at low pH was rapid (seconds or less) for KK, KKNN, and the KKNNNNNN flanking sequences on both N- and C-termini and the KLFAGHQ sequence that flanks the spontaneously TM-inserting 3A protein of polio virus. In vesicles composed of 6:4 (mol/mol) POPC/cholesterol, interconversion was still rapid, with the exception of the peptide flanked by KKNNNNNN sequences, for which the half time of interconversion slowed to minutes. This behavior suggests that, at least in membranes with low levels of cholesterol, movement of hydrophilic JM segments (and analogous hydrophobic loops in multipass TM proteins) across membranes may be more facile than previously thought. This may have important biological implications.

Synthesis and characterization of β-peptide helices as transmembrane domains in lipid model membranes

Aggregation, orientation and dynamics of transmembrane helices are of relevance for protein function and transmembrane signaling. To explore the interactions of transmembrane helices and the interdependence of peptide structure and lipid composition of the membranes, β-peptides were explored as model transmembrane domains. Various hydrophobic β-peptide sequences were synthesized by solid phase peptide synthesis. Conformational analyses of β-peptide helices were performed in organic solvents (methanol and 2,2,2-trifluoroethanol) and in large unilamellar liposomes (dimyristoylphosphatidylcholine, dipalmitoylphosphatidylcholine and dioleoylphosphatidylcholine) indicating 12- and 14-helix conformations, depending on β³ -amino acid sequences. The intrinsic tryptophan fluorescence of β³ -homotryptophan units inserted in the center or near the end of the sequence was used to verify the membrane insertion of the β-peptides. A characteristic blue shift with peripheral β³ -homotryptophan compared with β-peptides with central tryptophan served as indication for a transmembrane orientation of the β-peptides within the lipid bilayer. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.

Biomimetic Hybrid Nanocontainers with Selective Permeability

Chemistry plays a crucial role in creating synthetic analogues of biomacromolecular structures. Of particular scientific and technological interest are biomimetic vesicles that are inspired by natural membrane compartments and organelles but avoid their drawbacks, such as membrane instability and limited control over cargo transport across the boundaries. In this study, completely synthetic vesicles were developed from stable polymeric walls and easy-to-engineer membrane DNA nanopores. The hybrid nanocontainers feature selective permeability and permit the transport of organic molecules of 1.5 nm size. Larger enzymes (ca. 5 nm) can be encapsulated and retained within the vesicles yet remain catalytically active. The hybrid structures constitute a new type of enzymatic nanoreactor. The high tunability of the polymeric vesicles and DNA pores will be key in tailoring the nanocontainers for applications in drug delivery, bioimaging, biocatalysis, and cell mimicry.

Crown ether helical peptides are preferentially inserted in lipid bilayers as a transmembrane ion channels

Oriented circular dichroism was used to study the alignment crown ether-modified peptides. The influence of different N- and C-functionalities was assessed using at variable peptide:lipid ratios from 1:20 to 1:200. Neither the functionalities nor the concentration had any major effect on the orientation. The alignment of the 21-mer peptides was also examined with lipid membranes of different bilayer thickness. The use of synchrotron radiation as light source allowed the study of peptide:lipid molar ratios from 1:20 to 1:1000. For all conditions studied, the peptides were found to be predominantly incorporated as a transmembrane helix into the membrane, especially at low peptide concentration, but started to aggregate on the membrane surface at higher peptide:lipid ratios. The structural information on the preferred trans-bilayer alignment of the crown ether functional groups explains their ion conductivity and is useful for the further development of membrane-active nanochemotherapeutics.

β-Glutamine-mediated self-association of transmembrane β-peptides within lipid bilayers

The rational design and synthesis of novel transmembrane β-peptides forming stable secondary structures in a membrane environment are described. Their state of aggregation within the membrane is controlled by hydrogen bonds.

Transmembrane β-peptide helices and their association in lipid membranes are still widely unexplored. We designed and synthesized transmembrane β-peptides harboring different numbers of d-β³-glutamine residues (^hGln) by solid phase peptide synthesis. By means of circular dichroism spectroscopic measurements, the secondary structure of the β-peptides reconstituted into unilamellar vesicles was determined to be similar to a right-handed 3₁₄-helix. Fluorescence spectroscopy using d-β³-tryptophan residues strongly suggested a transmembrane orientation. Two or three ^hGln served as recognition units between the helices to allow helix–helix assembly driven by hydrogen bond formation. The association state of the transmembrane β-peptides as a function of the number of ^hGln residues was investigated by fluorescence resonance energy transfer (FRET). Therefore, two fluorescence probes (NBD, TAMRA) were covalently attached to the side chains of the transmembrane β-peptide helices. The results clearly demonstrate that only β-peptides with ^hGln as recognition units assemble into oligomers, presumably trimers. Temperature dependent FRET experiments further show that the strength of the helix–helix association is a function of the number of ^hGln residues in the helix.

Spectroscopic Characterization of Structural Changes in Membrane Scaffold Proteins Entrapped within Mesoporous Silica Gel Monoliths

The changes in the orientation and conformation of three different membrane scaffold proteins (MSPs) upon entrapment in sol-gel-derived mesoporous silica monoliths were investigated. MSPs were examined in either a lipid-free or a lipid-bound conformation, where the proteins were associated with lipids to form nanolipoprotein particles (NLPs). NLPs are water-soluble, disk-shaped patches of a lipid bilayer that have amphiphilic MSPs shielding the hydrophobic lipid tails. The NLPs in this work had an average thickness of 5 nm and diameters of 9.2, 9.7, and 14.8 nm. We have previously demonstrated that NLPs are more suitable lipid-based structures for silica gel entrapment than liposomes because of their size compatibility with the mesoporous network (2-50 nm) and minimally altered structure after encapsulation. Here we further elaborate on that work by using a variety of spectroscopic techniques to elucidate whether or not different MSPs maintain their protein-lipid interactions after encapsulation. Fluorescence spectroscopy and quenching of the tryptophan residues with acrylamide, 5-DOXYL-stearic acid, and 16-DOXYL-stearic acid were used to determine the MSP orientation. We also utilized fluorescence anisotropy of tryptophans to measure the relative size of the NLPs and MSP aggregates after entrapment. Finally, circular dichroism spectroscopy was used to examine the secondary structure of the MSPs. Our results showed that, after entrapment, all of the lipid-bound MSPs maintained orientations that were minimally changed and indicative of association with lipids in NLPs. The tryptophan residues appeared to remain buried within the hydrophobic core of the lipid tails in the NLPs and appropriately spaced from the bilayer center. Also, after entrapment, lipid-bound MSPs maintained a high degree of α-helical content, a secondary structure associated with protein-lipid interactions. These findings demonstrate that NLPs are capable of serving as viable hosts for functional integral membrane proteins in the synthesis of sol-gel-derived bioinorganic hybrid nanomaterials.

Functions of the C-terminal domains of apoptosis-related proteins of the Bcl-2 family

Bcl-2 family proteins are involved in cell homeostasis, where they regulate cell death. Some of these proteins are pro-apoptotic and others pro-survival. Moreover, many of them share a similar domain composition with several of the so-called BH domains, although some only have a BH3 domain. A C-terminal domain is present in all the multi-BH domain proteins and in some of the BH3-only ones. This C-terminal domain is hydrophobic or amphipathic, for which reason it was thought when they were discovered that they were membrane anchors. Although this is indeed one of their functions, it has since been observed that they may also serve as regulators of the function of some members of this family, such as Bax. They may also serve to recognize the target membrane of some of these proteins, which only after an apoptotic signal, are incorporated into a membrane. It has been shown that peptides that imitate the sequence of C-terminal domains can form pores and may serve as a model to design cytotoxic molecules.

Mapping peptide thiol accessibility in membranes using a quaternary ammonium isotope-coded mass tag (ICMT)

The plasma membrane contains a diverse array of proteins, including receptors, channels, and signaling complexes, that serve as decision-making centers. Investigation of membrane protein topology is important for understanding the function of these types of protein. Here, we report a method to determine protein topology in the membrane that utilizes labeling of cysteine with isotope-coded mass tags. The mass tags contain a thiol reactive moiety, linker, and a quaternary ammonium group to aid ionization in the mass spectrometer and were synthesized in both light and heavy (deuterated) forms. The probes were found to be membrane impermeable when applied to lipid vesicles. To assess the utility of the probes for mapping peptide thiol topology, we employed a two-step labeling procedure. Vesicles containing α-helical transmembrane peptides were labeled with heavy (or light) probe, solubilized by detergent, and then labeled by an excess of the complementary probe. Peptide for which the cysteine was oriented in the center of the lipid bilayer was not labeled until the lipid vesicles were lysed with detergent, consistent with the membrane impermeability of the probes and reduced ionization of the thiol in the hydrophobic membrane. Peptide for which the cysteine was positioned in the headgroup zone of the lipid bilayer was labeled rapidly. Peptide for which the cysteine was positioned below the headgroup abutting the hydrocarbon region was labeled at a reduced rate compared to the fully accessible cysteine. Moreover, the effect of lipid bilayer structure on the kinetics of peptide and lipid flipping in the bilayer was readily measured with our two-step labeling method. The small sample size required, the ease and rapidity of sample preparation, and the amenability of MALDI-TOF mass spectral analysis to the presence of lipids will enable future facile investigation of membrane proteins in a cellular context.

Analyzing transmembrane protein and hydrophobic helix topography by dual fluorescence quenching

The location of fluorescent groups relative to the lipid bilayer can be evaluated using fluorescence quenchers embedded in the membrane and/or dissolved in aqueous solution. Quenching can be used to define the membrane topography of membrane proteins and individual membrane-embedded hydrophobic helices by combining it with the placement of fluorescent groups, including Trp, at defined sequence positions. This chapter briefly discusses various quenching methods for studies of membrane protein topography and provides detailed protocols for dual quencher analysis, a rapid, highly sensitive, and experimentally flexible approach in which the information gained from both a membrane-embedded and aqueous quencher is combined.

Analyzing the effects of hydrophobic mismatch on transmembrane α-helices using tryptophan fluorescence spectroscopy

Hydrophobic matching between transmembrane protein segments and the lipid bilayer in which they are embedded is a significant factor in the behavior and orientation of such transmembrane segments. The condition of hydrophobic mismatch occurs when the hydrophobic thickness of a lipid bilayer is significantly different than the length of the membrane spanning segment of a protein, resulting in a mismatch. This mismatch can result in altered function of proteins as well as nonnative structural arrangements including effects on transmembrane α-helix tilt angles, oligomerization state, and/or the formation of non-transmembrane topographies. Here, a fluorescence-based protocol is described for testing model transmembrane α-helices and their sensitivity to hydrophobic mismatch by measuring the propensity of these helices to form non-transmembrane structures. Overall, good hydrophobic matching between the bilayer and transmembrane segments is an important factor that must be considered when designing membrane proteins or peptides.

Ion permeation by a folded multiblock amphiphilic oligomer achieved by hierarchical construction of self-assembled nanopores

A multiblock amphiphilic molecule 1, with a tetrameric alternating sequence of hydrophilic and hydrophobic units, adopts a folded structure in a liposomal membrane like a multipass transmembrane protein, and is able to transport alkali metal cations through the membrane. Hill's analysis and conductance measurements, analyzed by the Hille equation, revealed that the tetrameric assembly of 1 forms a 0.53 nm channel allowing for permeation of cations. Since neither 3, bearing flexible hydrophobic units and forming no stacked structures in the membrane, nor 2, a monomeric version of 1, is able to transport cations, the folded conformation of 1 in the membrane is likely essential for realizing its function. Thus, function and hierarchically formed higher-order structures of 1, is strongly correlated with each other like proteins and other biological macromolecules.

The determinants of hydrophobic mismatch response for transmembrane helices

Hydrophobic mismatch arises from a difference in the hydrophobic thickness of a lipid membrane and a transmembrane protein segment, and is thought to play an important role in the folding, stability and function of membrane proteins. We have investigated the possible adaptations that lipid bilayers and transmembrane α-helices undergo in response to mismatch, using fully-atomistic molecular dynamics simulations totaling 1.4 μs. We have created 25 different tryptophan-alanine-leucine transmembrane α-helical peptide systems, each composed of a hydrophobic alanine-leucine stretch, flanked by 1-4 tryptophan side chains, as well as the β-helical peptide dimer, gramicidin A. Membrane responses to mismatch include changes in local bilayer thickness and lipid order, varying systematically with peptide length. Adding more flanking tryptophan side chains led to an increase in bilayer thinning for negatively mismatched peptides, though it was also associated with a spreading of the bilayer interface. Peptide tilting, bending and stretching were systematic, with tilting dominating the responses, with values of up to ~45° for the most positively mismatched peptides. Peptide responses were modulated by the number of tryptophan side chains due to their anchoring roles and distributions around the helices. Potential of mean force calculations for local membrane thickness changes, helix tilting, bending and stretching revealed that membrane deformation is the least energetically costly of all mismatch responses, except for positively mismatched peptides where helix tilting also contributes substantially. This comparison of energetic driving forces of mismatch responses allows for deeper insight into protein stability and conformational changes in lipid membranes.

Interaction with lipid II induces conformational changes in bovicin HC5 structure

Bovicin HC5 is a lantibiotic produced by Streptococcus bovis HC5 that targets the cell wall precursor lipid II. An understanding of the modes of action against target bacteria can help broadening the clinical applicability of lantibiotics in human and veterinary medicine. In this study, the interaction of bovicin HC5 with lipid II was examined using tryptophan fluorescence and circular dichroism spectroscopy with model membrane systems that do or do not allow pore formation by bovicin HC5. In the presence of lipid II, a blue-shift of 12 nm could be observed for the fluorescence emission maximum of the tryptophan residue for all of the membrane systems tested. This change in fluorescence emission was paralleled by a decrease in accessibility toward acrylamide and phospholipids carrying a spin-label at the acyl chain; the tryptophan residue of bovicin HC5 was located near the twelfth position of the membrane phospholipid acyl chains. Moreover, the binding of lipid II by bovicin HC5 induced remarkable conformational changes in the bovicin HC5 structure. The interaction of bovicin HC5 with lipid II was highly stable even at pH 2.0. These results indicate that bovicin HC5 interacts directly with lipid II and that the topology of this interaction changes under different conditions, which is relevant for the biological activity of the peptide. To our knowledge, bovicin HC5 is the only bacteriocin described thus far that is able to interact with its target in extreme pH values, and this fact might be related to its unique structure and stability.

Tyrosine replacing tryptophan as an anchor in GWALP peptides

Synthetic model peptides have proven useful for examining fundamental peptide-lipid interactions. A frequently employed peptide design consists of a hydrophobic core of Leu-Ala residues with polar or aromatic amino acids flanking each side at the interfacial positions, which serve to "anchor" a specific transmembrane orientation. For example, WALP family peptides (acetyl-GWW(LA)(n)LWWA-[ethanol]amide), anchored by four Trp residues, have received particular attention in both experimental and theoretical studies. A recent modification proved successful in reducing the number of Trp anchors to only one near each end of the peptide. The resulting GWALP23 (acetyl-GGALW(5)(LA)(6)LW(19)LAGA-[ethanol]amide) displays reduced dynamics and greater sensitivity to lipid-peptide hydrophobic mismatch than traditional WALP peptides. We have further modified GWALP23 to incorporate a single tyrosine, replacing W(5) with Y(5). The resulting peptide, Y(5)GWALP23 (acetyl-GGALY(5)(LA)(6)LW(19)LAGA-amide), has a single Trp residue that is sensitive to fluorescence experiments. By incorporating specific (2)H and (15)N labels in the core sequence of Y(5)GWALP23, we were able to use solid-state NMR spectroscopy to examine the peptide orientation in hydrated lipid bilayer membranes. The peptide orients well in membranes and gives well-defined (2)H quadrupolar splittings and (15)N/(1)H dipolar couplings throughout the core helical sequence between the aromatic residues. The substitution of Y(5) for W(5) has remarkably little influence on the tilt or dynamics of GWALP23 in bilayer membranes of the phospholipids DOPC, DMPC, or DLPC. A second analogue of the peptide with one Trp and two Tyr anchors, Y(4,5)GWALP23, is generally less responsive to the bilayer thickness and exhibits lower apparent tilt angles with evidence of more extensive dynamics. In general, the peptide behavior with multiple Tyr anchors appears to be quite similar to the situation when multiple Trp anchors are present, as in the original WALP series of model peptides.

Lateral sorting in model membranes by cholesterol-mediated hydrophobic matching

Theoretical studies predict hydrophobic matching between transmembrane domains of proteins and bilayer lipids to be a physical mechanism by which membranes laterally self-organize. We now experimentally study the direct consequences of mismatching of transmembrane peptides of different length with bilayers of different thicknesses at the molecular level. In both model membranes and simulations we show that cholesterol critically constrains structural adaptations at the peptide-lipid interface under mismatch. These constraints translate into a sorting potential and lead to selective lateral segregation of peptides and lipids according to their hydrophobic length.

Contribution of topology determinants of a viral movement protein to its membrane association, intracellular traffic, and viral cell-to-cell movement

The p7B movement protein (MP) of Melon necrotic spot virus (MNSV) is a single-pass membrane protein associated with the endoplasmic reticulum (ER), the Golgi apparatus (GA), and plasmodesmata (Pd). Experimental data presented here revealed that the p7B transmembrane domain (TMD) was sufficient to target the green fluorescent protein (GFP) to ER membranes. In addition, the short extramembrane regions of p7B were essential for subsequent ER export and transport to the GA and Pd. Microsomal partitioning and bimolecular fluorescence assays supported a type II topology of p7B in planta. Mutations affecting conventional determinants of p7B membrane topology, such as the TMD secondary structure, the overall hydrophobicity profile, the so-called "aromatic belt," and the net charge distribution on either side of the TMD, were engineered into infectious RNAs to investigate the relationship between the MP structure and MNSV cell-to-cell movement. The results revealed that (i) the overall hydrophobic profile and the α-helix integrity of the TMD were relevant for virus movement, (ii) modification of the net charge balance of the regions flanking both TMD sides drastically reduced cell-to-cell movement, (iii) localization of p7B to the GA was necessary but not sufficient for virus movement, and (iv) membrane insertion was essential for p7B function in virus movement. Our results therefore indicate that MNSV cell-to-cell movement requires sequential transport of p7B from the ER via the GA to Pd, which is modulated by a combination of several signals with different strengths in the extramembrane regions and TMD of the MP.

Monitoring membrane binding and insertion of peptides by two-color fluorescent label

Herein, we developed an approach for monitoring membrane binding and insertion of peptides using a fluorescent environment-sensitive label of the 3-hydroxyflavone family. For this purpose, we labeled the N-terminus of three synthetic peptides, melittin, magainin 2 and poly-l-lysine capable to interact with lipid membranes. Binding of these peptides to lipid vesicles induced a strong fluorescence increase, which enabled to quantify the peptide-membrane interaction. Moreover, the dual emission of the label in these peptides correlated well with the depth of its insertion measured by the parallax quenching method. Thus, in melittin and magainin 2, which show deep insertion of their N-terminus, the label presented a dual emission corresponding to a low polar environment, while the environment of the poly-l-lysine N-terminus was rather polar, consistent with its location close to the bilayer surface. Using spectral deconvolution to distinguish the non-hydrated label species from the hydrated ones and two photon fluorescence microscopy to determine the probe orientation in giant vesicles, we found that the non-hydrated species were vertically oriented in the bilayer and constituted the best indicators for evaluating the depth of the peptide N-terminus in membranes. Thus, this label constitutes an interesting new tool for monitoring membrane binding and insertion of peptides.

Variation of the lateral mobility of transmembrane peptides with hydrophobic mismatch

A hydrophobic mismatch between protein length and membrane thickness can lead to a modification of protein conformation, function, and oligomerization. To study the role of hydrophobic mismatch, we have measured the change in mobility of transmembrane peptides possessing a hydrophobic helix of various length d(pi) in lipid membranes of giant vesicles. We also used a model system where the hydrophobic thickness of the bilayers, h, can be tuned at will. We precisely measured the diffusion coefficient of the embedded peptides and gained access to the apparent size of diffusing objects. For bilayers thinner than d(pi), the diffusion coefficient decreases, and the derived characteristic sizes are larger than the peptide radii. Previous studies suggest that peptides accommodate by tilting. This scenario was confirmed by ATR-FTIR spectroscopy. As the membrane thickness increases, the value of the diffusion coefficient increases to reach a maximum at h approximately = d(pi). We show that this variation in diffusion coefficient is consistent with a decrease in peptide tilt. To do so, we have derived a relation between the diffusion coefficient and the tilt angle, and we used this relation to derive the peptide tilt from our diffusion measurements. As the membrane thickness increases, the peptides raise (i.e., their tilt is reduced) and reach an upright position and a maximal mobility for h approximately = d(pi). Using accessibility measurements, we show that when the membrane becomes too thick, the peptide polar heads sink into the interfacial region. Surprisingly, this "pinching" behavior does not hinder the lateral diffusion of the transmembrane peptides. Ultimately, a break in the peptide transmembrane anchorage is observed and is revealed by a "jump" in the D values.

Cholesterol-binding viral proteins in virus entry and morphogenesis

Up to now less than a handful of viral cholesterol-binding proteins have been characterized, in HIV, influenza virus and Semliki Forest virus. These are proteins with roles in virus entry or morphogenesis. In the case of the HIV fusion protein gp41 cholesterol binding is attributed to a cholesterol recognition consensus (CRAC) motif in a flexible domain of the ectodomain preceding the trans-membrane segment. This specific CRAC sequence mediates gp41 binding to a cholesterol affinity column. Mutations in this motif arrest virus fusion at the hemifusion stage and modify the ability of the isolated CRAC peptide to induce segregation of cholesterol in artificial membranes.Influenza A virus M2 protein co-purifies with cholesterol. Its proton translocation activity, responsible for virus uncoating, is not cholesterol-dependent, and the transmembrane channel appears too short for integral raft insertion. Cholesterol binding may be mediated by CRAC motifs in the flexible post-TM domain, which harbours three determinants of binding to membrane rafts. Mutation of the CRAC motif of the WSN strain attenuates virulence for mice. Its affinity to the raft-non-raft interface is predicted to target M2 protein to the periphery of lipid raft microdomains, the sites of virus assembly. Its influence on the morphology of budding virus implicates M2 as factor in virus fission at the raft boundary. Moreover, M2 is an essential factor in sorting the segmented genome into virus particles, indicating that M2 also has a role in priming the outgrowth of virus buds.SFV E1 protein is the first viral type-II fusion protein demonstrated to directly bind cholesterol when the fusion peptide loop locks into the target membrane. Cholesterol binding is modulated by another, proximal loop, which is also important during virus budding and as a host range determinant, as shown by mutational studies.

Quantitative analysis of protein-lipid interactions using tryptophan fluorescence

The fluorescent properties of the amino acid tryptophan make it a useful tool for fluorometric assays. Because tryptophan fluorescence is remarkably sensitive to the polarity of the environment, it can be used to determine the affinity of tryptophan-containing peptides for phospholipid vesicles of varying compositions. Here, we describe a method for using tryptophan fluorescence to determine the binding affinities of peptides derived from the proteins Raf-1 and KSR-1 to small unilamellar vesicles containing phosphatidic acid. The method can be extrapolated to measure the binding of other tryptophan-containing peptides or proteins to lipid vesicles.

The effect of hydrophilic substitutions and anionic lipids upon the transverse positioning of the transmembrane helix of the ErbB2 (neu) protein incorporated into model membrane vesicles

The sequence of the transmembrane (TM) helix of ErbB2, a member of the epidermal growth factor receptor (ErbB) family, can influence its activity. In this report, the sequence and lipid dependence of the transverse position of a model-membrane-inserted peptides containing the ErbB2 TM helix and some of the juxtamembrane (JM) residues were studied. For the ErbB2 TM helix inserted into phosphatidylcholine vesicles, the activating V664E mutation was found to induce a transverse shift involving the movement of the E residue toward the membrane surface. This shortened the effective length of the TM-spanning portion of the sequence. The transverse shift was observed with the E664 residue in both the uncharged and charged states, but the extent of the shift was larger when the E residue was charged. When a series of hydrophilic residues was substituted for V664, the resulting transverse shifts at pH 7.0 decreased in the order D,H>E>Q>K>G>V. Except for His, this order is strongly correlated to that reported for the degree to which these substitutions induce cellular transformation when introduced into full-length ErbB2. To examine the effect of lipid on transverse shift, we studied the uncharged V664Q mutation. The presence of 20% of the anionic lipid DOPS (dioleoylphosphatidylserine) in the model membrane vesicles, which introduces a physiologically relevant level of anionic lipid, did not affect the degree of transverse shift. However, in the case of a peptide containing a V674Q substitution, in which the Q is closer to the C-terminus of the ErbB2 TM helix than the N-terminus, transverse shift was suppressed in vesicles containing 20% DOPS. This suggests that the interaction of the cationic JM residues flanking the C-terminus of the ErbB2 TM helix interact with anionic lipids to anchor the C-terminal end of the TM helix. This anchoring site may act as a pivot that amplifies transverse movements of the ErbB2 TM segment to induce a large swinging-type motion in the extracellular domain of the protein, affecting ErbB2 activity. Interactions interrupting C-terminal JM residue association with anionic lipid might partly impact ErbB2 activity by disrupting this pivoting.

Fluorescence and molecular dynamics studies of the acetylcholine receptor γM4 transmembrane peptide in reconstituted systems

A combination of fluorescence spectroscopy and molecular dynamics (MD) is applied to assess the conformational dynamics of a peptide making up the outermost ring of the nicotinic acetylcholine receptor (AChR) transmembrane region and the effect of membrane thickness and cholesterol on the hydrophobic matching of this peptide. The fluorescence studies exploit the intrinsic fluorescence of the only tryptophan residue in a synthetic peptide corresponding to the fourth transmembrane domain of the AChR gamma subunit (gammaM4-Trp(6)) reconstituted in lipid bilayers of varying thickness, and combine this information with quenching studies using depth-sensitive phosphatidylcholine spin-labeled probes and acrylamide, polarization of fluorescence, and generalized polarization of Laurdan. A direct correlation was found between bilayer width and the depth of insertion of Trp(6). We further extend our recent MD study of the conformational dynamics of the AChR channel to focus on the crosstalk between M4 and the lipid-belt region. The isolated gammaM4 peptide is shown to possess considerable orientational flexibility while maintaining a linear alpha-helical structure, and to vary its tilt depending on bilayer width and cholesterol (Chol) content. MD studies also show that gammaM4 also establishes contacts with the other TM peptides on its inner face, stabilizing a shorter TM length that is still highly sensitive to the lipid environment. In the native membrane the topology of the M4 ring is likely to exhibit a similar behavior, dynamically modifying its tilt to match the hydrophobic thickness of the bilayer.

Protein–lipid interactions studied with designed transmembrane peptides: role of hydrophobic matching and interfacial anchoring (Review)

Biological membranes are characterized by a heterogeneous composition, which is not only manifested in the wide variety of their components, but also in aspects like the lateral organization, topology, and conformation of proteins and lipids. In bringing about the correct membrane structure, protein-lipid interactions can be expected to play a prominent role. The extent of hydrophobic matching between transmembrane protein segments and lipids potentially constitutes a versatile director of membrane organization, because a tendency to avoid hydrophobic mismatch could result in compensating adaptations such as tilt of the transmembrane segment or segregation into distinct domains. Also, interfacial interactions between lipid headgroups and the aromatic and charged residues that typically flank transmembrane domains may act as an organizing element. In this review, we discuss the numerous model studies that have systematically explored the influence of hydrophobic matching and interfacial anchoring on membrane structure. Designed peptides consisting of a polyleucine or polyleucine/alanine hydrophobic stretch, which is flanked on both sides by tryptophan or lysine residues, reflect the general layout of transmembrane protein segments. It is shown for phosphatidylcholine bilayers and for other model membranes that these peptides adapt a transmembrane topology without extensive peptide or lipid adaptations under conditions of hydrophobic matching, but that significant rearrangements can result from hydrophobic mismatch. Moreover, these effects depend on the nature of the flanking residues, implying a modulation of the mismatch response by interfacial interactions of the flanking residues. The implications of these model studies for the organization of biomembranes are discussed in the context of recent experiments with more complex systems.