Lipase-catalyzed polycondensations: effect of substrates and solvent on chain formation, dispersity, and end-group structure

Biocatalyst immobilization on magnetic nano-architectures for potential applications in condensation reactions

In this review article, a perspective on the immobilization of various hydrolytic enzymes onto magnetic nanoparticles for synthetic organic chemistry applications is presented. After a first part giving short overview on nanomagnetism and highlighting advantages and disadvantages of immobilizing enzymes on magnetic nanoparticles (MNPs), the most important hydrolytic enzymes and their applications were summarized. A section reviewing the immobilization techniques with a particular focus on supporting enzymes on MNPs introduces the reader to the final chapter describing synthetic organic chemistry applications of small molecules (flavour esters) and polymers (polyesters and polyamides). Finally, the conclusion and perspective section gives the author's personal view on further research discussing the new idea of a synergistic rational design of the magnetic and biocatalytic component to produce novel magnetic nano-architectures.

Glycerol- and diglycerol-based polyesters: Evaluation of backbone alterations upon nano-formulation performance

Despite the success of polyethylene glycol-based (PEGylated) polyesters in the drug delivery and biomedical fields, concerns have arisen regarding PEG's immunogenicity and limited biodegradability. In addition, inherent limitations, including limited chemical handles as well as highly hydrophobic nature, can restrict their effectiveness in physiological conditions of the polyester counterpart. To address these matters, an increasing amount of research has been focused towards identifying alternatives to PEG. One promising strategy involves the use of bio-derived polyols, such as glycerol. In particular, glycerol is a hydrophilic, non-toxic, untapped waste resource and as other polyols, can be incorporated into polyesters via enzymatic catalysis routes. In the present study, a systematic screening is conducted focusing on the incorporation of 1,6-hexanediol (Hex) (hydrophobic diol) into both poly(glycerol adipate) (PGA) and poly(diglycerol adipate) (PDGA) at different (di)glycerol:hex ratios (30:70; 50:50 and 70:30 mol/mol) and its effect on purification upon NPs formation. By varying the amphiphilicity of the backbone, we demonstrated that minor adjustments influence the NPs formation, NPs stability, drug encapsulation, and degradation of these polymers, despite the high chemical similarity. Moreover, the best performing materials have shown good biocompatibility in both in vitro and in vivo (whole organism) tests. As preliminary result, the sample containing diglycerol and Hex in a 70:30 ratio, named as PDGA-Hex 30%, has shown to be the most promising candidate in this small library analysed. It demonstrated comparable stability to the glycerol-based samples in various media but exhibited superior encapsulation efficiency of a model hydrophobic dye. This in-depth investigation provides new insights into the design and modification of biodegradable (di)glycerol-based polyesters, potentially paving the way for more effective and sustainable PEG-free drug delivery nano-systems in the pharmaceutical and biomedical fields.

Controlled Enzymatic Synthesis of Polyesters Based on a Cellulose-Derived Triol Monomer: A Design of Experiment Approach

Regioselective enzymatic polycondensation of the bio-based cellulose derived polyol, Triol-citro, and dimethyl adipate using Candida antarctica Lipase B (CaLB) was investigated. A Design of Experiment approach with MODDE® Pro 13 was used to determine important factors in the branching behavior of this polymer, and reactant ratio, temperature, reaction time and enzyme wt % were the studied factors. Multifunctional polyesters with pendant hydroxy groups were synthesized and fully characterized using 2D NMR techniques to determine degree of branching. Branching was minimal, with a maximum of 16 % observed, and monomer ratio, temperature and reaction time were all determined to be significant factors. In this work, Mn of up to 13 kDa were achieved, while maintaining degree of branching below 15 %, resulting in a linear polyester with the potential to be further functionalized.

Recent Advances in the Enzymatic Synthesis of Polyester

Polyester is a kind of polymer composed of ester bond-linked polybasic acids and polyol. This type of polymer has a wide range of applications in various industries, such as automotive, furniture, coatings, packaging, and biomedical. The traditional process of synthesizing polyester mainly uses metal catalyst polymerization under high-temperature. This condition may have problems with metal residue and undesired side reactions. As an alternative, enzyme-catalyzed polymerization is evolving rapidly due to the metal-free residue, satisfactory biocompatibility, and mild reaction conditions. This article presented the reaction modes of enzyme-catalyzed ring-opening polymerization and enzyme-catalyzed polycondensation and their combinations, respectively. In addition, the article also summarized how lipase-catalyzed the polymerization of polyester, which includes (i) the distinctive features of lipase, (ii) the lipase-catalyzed polymerization and its mechanism, and (iii) the lipase stability under organic solvent and high-temperature conditions. In addition, this article also focused on the advantages and disadvantages of enzyme-catalyzed polyester synthesis under different solvent systems, including organic solvent systems, solvent-free systems, and green solvent systems. The challenges of enzyme optimization and process equipment innovation for further industrialization of enzyme-catalyzed polyester synthesis were also discussed in this article.

Lipase-Catalyzed Poly(glycerol-1,8-octanediol-sebacate): Biomaterial Engineering by Combining Compositional and Crosslinking Variables

This study examined poly(glycerol-1,8-octanediol-sebacate) (PGOS) copolymers with low-level substitution of O (1,8-octanediol) for G (glycerol) units (G/O ratios 0.5:0.5, 0.66:0.33, 0.75:0.25, 0.8:0.2, and 0.91:0.09) prepared in bulk by immobilized Candida antarctica Lipase B (N435) catalysis. The central question explored was the extent that exchanging less than half of poly(glycerol sebacate) (PGS) glycerol units with 1,8-octanediol can be used as a strategy to fine-tune biomaterial properties. Synthesized copolymers having G/O ratios of 0.66:0.33, 0.75:0.25, 0.8:0.2, and 0.91:0.09 have similar molecular weights, where M_w varied from 52,800 to 63,800 g/mol, M_n varied from 5100 to 6450 g/mol, and Đ_M (molecular mass dispersity, M_w/M_n) values were also similar (8.4-11.4). All of the copolymers were branched, and dendritic glycerol units reached 11% for PGOS-0.91:0.09:1.0. Analysis of DSC second heating scans revealed that copolymers with higher 1,8-octanediol contents have relatively higher T_m and ΔH_f values. Over the copolymer compositional range studied herein, T_m and ΔH_f values varied from 5.3 to 21.1 °C and 8.0 to 23.1 J/g, respectively. Stress-strain curves of PGOS copolymers cured at 140 °C for 48 h exhibited either a unimodal, bimodal, or trimodal response to tensile loading. Varying G/O from 10:1 to 2:1 resulted in significant increases in the peak stress (0.26-4.01 MPa), preyield modulus (0.65-62.59 MPa), failure to strain (64-110%), and failure toughness (0.1-0.56 MPa). This demonstrates that altering the G/O ratio over a narrow compositional range provides biomaterials with widely different yet tunable mechanical properties. Further investigation of PGOS-0.75:0.25:1.0 films revealed that varying the cure conditions from 120 to 160 °C for periods of 24-72 h provides access to biomaterials with a failure strain range from 15 to 224% and Young's modulus from 1.17 to 10.85 MPa. Hence, using the dual variables of compositional variation and changes in cure conditions provides an exciting platform for PGS analogues to optimize material-tissue interactions. Increased contents of 1,8-octanediol slowed in vitro degradation. Slowed degradation of PGOS relative to PGS will be valuable for use in slower healing wounds.

Enzymatic synthesis of novel aromatic-aliphatic polyesters with increased hydroxyl group density

BACKGROUND

Polyesters with pendant hydroxyl groups are attractive materials which offer additional functionalization points in the polymer chain. In contrast to chemical polycondensation, lipase regioselectivity enables the synthesis of these materials as certain hydroxyl groups remain unaffected during the enzymatic process.

METHODS AND MAJOR RESULTS

In this study, a combination of synthesis development and reactor design was used for the enzymatic synthesis of an aliphatic-aromatic polyester with two different classes of pendant hydroxyl groups. Using 2,6-bishydroxy(methyl)-p-cresol as diol in lipase catalyzed polycondensation with adipic acid required the addition of hexane diol as third monomer for polycondensation to take place. Reaction conditions were explored in order to identify the preferred reaction conditions for the incorporation of the aromatic diol and the enhancement of the hydroxyl group density. Post-polymerization with glycerol at low temperature integrated additional aliphatic hydroxyl groups, reduced the polydispersity and increased the end group functionality.

CONCLUSION

A new material with aromatic building blocks and boosted polymer chain reactivity was obtained, which is suggested to find application in various areas of material development from coatings to adhesives. This article is protected by copyright. All rights reserved.

Polybutylene Succinate, A potential bio-degradable polymer: Synthesis, copolymerization And Bio-degradation

Poly(butylene succinate) is one of the emerging bio-degradable polymer, which has huge potential to be employed in a wide range of applications. Further, it is also recognized as one of...

Lipase-Catalyzed Synthesis and Characterization of Poly(glycerol sebacate)

This study demonstrated that immobilized Candida antarctica lipase B (N435) catalysis in bulk leads to higher molecular weight poly(glycerol sebacate), PGS, than self-catalyzed condensation polymerization. Since the glass-transition temperature, fragility, modulus, and strength for rubbery networks are inversely dependent on the concentration of chain ends, higher molecular weight PGS prepolymers will enable the preparation of cross-linked PGS matrices with unique mechanical properties. The evolution of molecular species during the prepolymerization step conducted at 120 °C for 24 h, prior to enzyme addition, revealed regular decreases in sebacic acid and glycerol-sebacate dimer with corresponding increases in oligomers with chain lengths from 3 to 7 units such that a homogeneous liquid substrate has resulted. At 67 h, for N435-catalyzed PGS synthesis, the carboxylic acid conversion reached 82% without formation of a gel fraction, and number-average molecular weight (M_n) and weight-average molecular weight (M_w) values reached 6000 and 59 400 g/mol, respectively. In contrast, self-catalyzed PGS condensation polymerizations required termination at 55 h to avoid gelation, reached 72% conversion, and M_n and M_w values of 2600 and 13 800 g/mol, respectively. We also report the extent that solvent fractionation can enrich PGS in higher molecular weight chains. The use of methanol as a nonsolvent increased M_n and M_w by 131.7 and 18.3%, respectively, and narrower dispersity (Đ) decreased by 47.7% relative to the nonfractionated product.

Ferulic Acid as Building Block for the Lipase-Catalyzed Synthesis of Biobased Aromatic Polyesters

Enzymatic synthesis of aromatic biobased polyesters is a recent and rapidly expanding research field. However, the direct lipase-catalyzed synthesis of polyesters from ferulic acid has not yet been reported. In this work, various ferulic-based monomers were considered for their capability to undergo CALB-catalyzed polymerization. After conversion into diesters of different lengths, the CALB-catalyzed polymerization of these monomers with 1,4-butanediol resulted in short oligomers with a DP_n up to 5. Hydrogenation of the double bond resulted in monomers allowing obtaining polyesters of higher molar masses with DP_n up to 58 and M_w up to 33,100 g·mol⁻¹. These polyesters presented good thermal resistance up to 350 °C and T_g up to 7 °C. Reduction of the ferulic-based diesters into diols allowed preserving the double bond and synthesizing polyesters with a DP_n up to 19 and M_w up to 15,500 g·mol⁻¹ and higher T_g (up to 21 °C). Thus, this study has shown that the monomer hydrogenation strategy proved to be the most promising route to achieve ferulic-based polyester chains of high DP_n. This study also demonstrates for the first time that ferulic-based diols allow the synthesis of high T_g polyesters. Therefore, this is an important first step toward the synthesis of competitive biobased aromatic polyesters by enzymatic catalysis.

Enzymatic Synthesis of Polyesters and Their Bioapplications: Recent Advances and Perspectives

This article reviews the most important advances in the enzymatic synthesis of polyesters. In first place, the different processes of polyester enzymatic synthesis, i.e., polycondensation, ring opening, and chemoenzymatic polymerizations, and the key parameters affecting these reactions, such as enzyme, concentration, solvent, or temperature, are analyzed. Then, the latest articles on the preparation of polyesters either by direct synthesis or via modification are commented. Finally, the main bioapplications of enzymatically obtained polyesters, i.e., antimicrobial, drug delivery, or tissue engineering, are described. It is intended to point out the great advantages that enzymatic polymerization present to obtain polymers and the disadvantages found to develop applied materials.

Review on the Impact of Polyols on the Properties of Bio-Based Polyesters

Bio-based polyol polyesters are biodegradable elastomers having potential utility in soft tissue engineering. This class of polymers can serve a wide range of biomedical applications. Materials based on these polymers are inherently susceptible to degradation during the period of implantation. Factors that influence the physicochemical properties of polyol polyesters might be useful in achieving a balance between durability and biodegradability. The characterization of these polyol polyesters, together with recent comparative studies involving creative synthesis, mechanical testing, and degradation, have revealed many of their molecular-level differences. The impact of the polyol component on the properties of these bio-based polyesters and the optimal reaction conditions for their synthesis are only now beginning to be resolved. This review describes our current understanding of polyol polyester structural properties as well as a discussion of the more commonly used polyol monomers.

Enzymatic Polycondensation of 1,6-Hexanediol and Diethyl Adipate: A Statistical Approach Predicting the Key-Parameters in Solution and in Bulk

Among the various catalysts that can be used for polycondensation reactions, enzymes have been gaining interest for three decades, offering a green and eco-friendly platform towards the sustainable design of renewable polyesters. However, limitations imposed by their delicate nature, render them less addressed. As a case study, we compare herein bulk and solution polycondensation of 1,6-hexanediol and diethyl adipate catalyzed by an immobilized lipase from Candida antarctica. The influence of various parameters including time, temperature, enzyme loading, and vacuum was assessed in the frame of a two-step polymerization with the help of response surface methodology, a statistical technique that investigates relations between input and output variables. Results in solution (diphenyl ether) and bulk conditions showed that a two-hour reaction time was enough to allow adequate oligomer growth for the first step conducted under atmospheric pressure at 100 °C. The number-average molecular weight (M_n) achieved varied between 5000 and 12,000 g·mol^-1 after a 24 h reaction and up to 18,500 g∙mol^-1 after 48 h. The statistical analysis showed that vacuum was the most influential factor affecting the M_n in diphenyl ether. In sharp contrast, enzyme loading was found to be the most influential parameter in bulk conditions. Recyclability in bulk conditions showed a constant M_n of the polyester over three cycles, while a 17% decrease was noticed in solution. The following work finally introduced a statistical approach that can adequately predict the M_n of poly(hexylene adipate) based on the choice of parameter levels, providing a handy tool in the synthesis of polyesters where the control of molecular weight is of importance.

Lipase-Catalyzed Transamidation of Urethane-Bond-Containing Ester

Significant improvement in mechanical properties and shape recovery in polyurethanes can be obtained by cross-linking, usually performed in a traditional chemical fashion. Here, we report model studies of enzymatic transamidations of urethane-bond-containing esters to study the principles of an enzymatic build-up of covalent cross-linked polyurethane networks via amide bond formation. The Lipase-catalyzed transamidation reaction of a urethane-bond-containing model ester ethyl 2-(hexylcarbamoyloxy)propanoate with various amines is discussed. A side product was formed, that could be successfully identified, and its synthesis reduced to a minimum (<1%). Furthermore, a noncatalyzed transamidation that is performed without CalB as the catalyst could be observed. Both observations are due to the known high reactivity of amines with urethane bonds.

Lipase-catalysed polycondensation of levulinic acid derived diol-diamide monomers: access to new poly(ester-co-amide)s

A new family of biobased poly(ester-co-amide)s is reported from the enzymatic polycondensation of a library of levulinic acid derived diol-diamide monomers with diesters.

Syntheses of high molecular weight hydroxy functional copolymers by green and selective polycondensation methods

Synthesizing hydroxy-functional linear copolymers with high molecular weights (M_n) and low branching degree (Den%) remains challenging, although there has been much headway in the area of functional copolymers. Here, we studied the effect of polymerization methods (one-step or two-step) and solvents (organic solvent: diphenyl ether or ionic liquids: [C_nmim]TF₂N/BF₄/PF₆, n = 2, 4, 6, 8, or 10) on M_n and Den% of copolymers P(OA–GA) (1,8-octanediol adipate (O-A)/glycerol adipate (G-A)). The M_n of P(OA–GA) reached up to 53 937 g mol⁻¹ in two-step in diphenyl ether, and the Den% of glycerol can be controlled within 30%. The physical properties of these copolymers were investigated by contact angles, differential scanning calorimetry (DSC), and in vitro biodegradation. With increasing glycerol content in the polyesters, both hydrophilic properties and degradation properties increased. This system not only facilitates the synthesis of functional polyesters with high molecular weight and low branching, but also expands the possibility of using bio-based monomers to synthesize functional polymers.

High molecular weight hydroxy functional copolymers have been synthesized by two-step polycondensation.

Multi-Step Enzymatic Synthesis of 1,9-Nonanedioic Acid from a Renewable Fatty Acid and Its Application for the Enzymatic Production of Biopolyesters

1,9-Nonanedioic acid is one of the valuable building blocks for producing polyesters and polyamides. Thereby, whole-cell biosynthesis of 1,9-nonanedioic acid from oleic acid has been investigated. A recombinant Corynebacterium glutamicum, expressing the alcohol/aldehyde dehydrogenases (ChnDE) of Acinetobacter sp. NCIMB 9871, was constructed and used for the production of 1,9-nonanedioic acid from 9-hydroxynonanoic acid, which had been produced from oleic acid. When 9-hydroxynonanoic acid was added to a concentration of 20 mM in the reaction medium, 1,9-nonanedioic acid was produced to 16 mM within 8 h by the recombinant C. glutamicum. The dicarboxylic acid was isolated via crystallization and then used for the production of biopolyester by a lipase. For instance, the polyesterification of 1,9-nonanedioic acid and 1,8-octanediol in diphenyl ether by the immobilized lipase B from Candida antarctica led to formation of the polymer product with the number-average molecular weight (M_n) of approximately 21,000. Thereby, this study will contribute to biological synthesis of long chain dicarboxylic acids and their application for the enzymatic production of long chain biopolyesters.

Immobilized Candida antarctica lipase B catalyzed synthesis of biodegradable polymers for biomedical applications

Biomedical applications of biodegradable polymers synthesized via the catalysis of immobilized Candida antarctica lipase B (CALB).

Biotic and Abiotic Synthesis of Renewable Aliphatic Polyesters from Short Building Blocks Obtained from Biotechnology

Biobased polymers have seen their attractiveness increase in recent decades thanks to the significant development of biorefineries to allow access to a wide variety of biobased building blocks. Polyesters are one of the best examples of the development of biobased polymers because most of them now have their monomers produced from renewable resources and are biodegradable. Currently, these polyesters are mainly produced by using traditional chemical catalysts and harsh conditions, but recently greener pathways with nontoxic enzymes as biocatalysts and mild conditions have shown great potential. Bacterial polyesters, such as poly(hydroxyalkanoate)s (PHA), are the best example of the biotic production of high molar mass polymers. PHAs display a wide variety of macromolecular architectures, which allow a large range of applications. The present contribution aims to provide an overview of recent progress in studies on biobased polyesters, especially those made from short building blocks, synthesized through step-growth polymerization. In addition, some important technical aspects of their syntheses through biotic or abiotic pathways have been detailed.

Enzymatic synthesis of an electrospinnable poly(butylene succinate-co-dilinoleic succinate) thermoplastic elastomer

Candida antarcticalipase B was successfully employed for the first time as a biocatalyst to obtain high molecular weight PBS : DLS copolyesterviaa two-stage method in diphenyl ether from diethyl succinate, 1,4-butanediol, and dimer linoleic diol.

Enzymatic Synthesis of Biobased Polyesters and Polyamides

Nowadays, "green" is a hot topic almost everywhere, from retailers to universities to industries; and achieving a green status has become a universal aim. However, polymers are commonly considered not to be "green", being associated with massive energy consumption and severe pollution problems (for example, the "Plastic Soup") as a public stereotype. To achieve green polymers, three elements should be entailed: (1) green raw materials, catalysts and solvents; (2) eco-friendly synthesis processes; and (3) sustainable polymers with a low carbon footprint, for example, (bio)degradable polymers or polymers which can be recycled or disposed with a gentle environmental impact. By utilizing biobased monomers in enzymatic polymerizations, many advantageous green aspects can be fulfilled. For example, biobased monomers and enzyme catalysts are renewable materials that are derived from biomass feedstocks; enzymatic polymerizations are clean and energy saving processes; and no toxic residuals contaminate the final products. Therefore, synthesis of renewable polymers via enzymatic polymerizations of biobased monomers provides an opportunity for achieving green polymers and a future sustainable polymer industry, which will eventually play an essential role for realizing and maintaining a biobased and sustainable society.

Enzymes as Green Catalysts for Precision Macromolecular Synthesis

The present article comprehensively reviews the macromolecular synthesis using enzymes as catalysts. Among the six main classes of enzymes, the three classes, oxidoreductases, transferases, and hydrolases, have been employed as catalysts for the in vitro macromolecular synthesis and modification reactions. Appropriate design of reaction including monomer and enzyme catalyst produces macromolecules with precisely controlled structure, similarly as in vivo enzymatic reactions. The reaction controls the product structure with respect to substrate selectivity, chemo-selectivity, regio-selectivity, stereoselectivity, and choro-selectivity. Oxidoreductases catalyze various oxidation polymerizations of aromatic compounds as well as vinyl polymerizations. Transferases are effective catalysts for producing polysaccharide having a variety of structure and polyesters. Hydrolases catalyzing the bond-cleaving of macromolecules in vivo, catalyze the reverse reaction for bond forming in vitro to give various polysaccharides and functionalized polyesters. The enzymatic polymerizations allowed the first in vitro synthesis of natural polysaccharides having complicated structures like cellulose, amylose, xylan, chitin, hyaluronan, and chondroitin. These polymerizations are "green" with several respects; nontoxicity of enzyme, high catalyst efficiency, selective reactions under mild conditions using green solvents and renewable starting materials, and producing minimal byproducts. Thus, the enzymatic polymerization is desirable for the environment and contributes to "green polymer chemistry" for maintaining sustainable society.

Enzymatic Polymerization of an Ibuprofen-Containing Monomer and Subsequent Drug Release

Novel ibuprofen-containing monomers comprising naturally occurring and biocompatible compounds were synthesized and subsequently polymerized via enzymatic methods. Through the use of a malic acid sugar backbone, ibuprofen was attached as a pendant group, and then subsequently polymerized with a linear aliphatic diol (1,3-propanediol, 1,5-pentanediol, or 1,8-octanediol) as comonomer using lipase B from Candida antarctica, a greener alternative to traditional metal catalysts. Polymer structures were elucidated by nuclear magnetic resonance and infrared spectroscopies, and thermal properties and molecular weights were determined. All polymers exhibited sustained ibuprofen release, with the longer chain, more hydrophobic diols exhibiting the slowest release over the 30 d study. Polymers were deemed cytocompatible using mouse fibroblasts, when evaluated at relevant therapeutic concentrations. Additionally, ibuprofen retained its chemical integrity throughout the polymerization and in vitro hydrolytic degradation processes. This methodology of enzymatic polymerization of a drug presents a more environmentally friendly synthesis and a novel approach to bioactive polymer conjugates.

A biocatalytic approach towards sustainable furanic–aliphatic polyesters

A series of sustainable furanic–aliphatic polyesters and oligoesters is successfully producedvia Candida antarcticaLipase B-catalyzed polymerization of biobased dimethyl 2,5-furandicarboxylate with various (potentially) renewable aliphatic diols.

Self-assembly, photoresponsive behavior and transport potential of azobenzene grafted dendronized polymeric amphiphiles

An azobenzene based light responsive polymeric system was developed to study the transport potential and photo-controlled release of encapsulated guests.

Lipase-catalyzed synthesis of oligoesters of 2,5-furandicarboxylic acid with aliphatic diols

2,5-Furandicarboxylic acid is a platform chemical for the production of biobased polymers and materials. This study reports the synthesis of furan oligoesters via polytransesterification of dimethyl furan-2,5-dicarboxylate and linear α, ω-aliphatic diols with chain length ranging from C2 to C12, using immobilized lipase B from Candida antarctica (Novozym 435) in dry organic solvents. Dimethyl furan-2,5-dicarboxylic acid (A) and 1,4-butanediol (B) were used as model substrates under different conditions producing a mixture of cyclic (CEOs) and linear (LEOs) ester oligomers up to decamers and dodecamers, respectively, with high yield. The size of the oligomers and distribution of the products is controlled by the initial concentration of substrates and temperature. While the shortest CEOs are the main cyclic compounds at 20 mM, the longest CEOs are formed at 175 mM. The chain length of the aliphatic diol co-monomers strongly influences the yield and the type of oligoesters formed. High substrate conversion of 90–95 % was obtained for C4–C12 diols, while in the case of ethylene glycol and 1,3-propanediol the conversion was moderate (i.e., 75 %). The product of the reaction between dimethyl furan-2,5-dicarboxylate and ethylene glycol (C2) and 1,3-propanediol (C3), respectively, consisted only of linear oligoesters. Longer oligoesters were obtained for alkyl chains higher than C4. The chain length and the abundance of oligoesters increases in the order: C2<C12<C10<C3<C8<C4 <C6. No substrate or product inhibition was observed in the production of furan-based oligoesters. The present biobased oligoesters are obtained via a green process and have potential application as macromonomers.

Environmentally benign synthesis of saturated and unsaturated aliphatic polyesters via enzymatic polymerization of biobased monomers derived from renewable resources

Biobased saturated aliphatic polyesters and photo-curable unsaturated aliphatic polyesters are enzymatically polymerized, and their structure–property relationships are systematically studied.

Two Enzyme Cooperatively Catalyzed Tandem Polymerization for the Synthesis of Polyester Containing Chiral (R)- or (S)-Ibuprofen Pendants

An interesting cooperation between Candida antarctica Lipase B (CAL-B) and alkaline protease from Bacillus subtilis (BSP) in the copolymerization of bulky ibuprofen-containing hydroxyacid methyl ester (HAEP) and ε-caprolactone (ε-CL) is observed. This cooperation improved the M¯n of the polymers from 3130 (CAL-B) to 9200 g mol-1 (CAL-B/BSP). Experimental results clearly indicate that CAL-B mainly catalyzes the ring-opening polymerization (ROP) of ε-CL under the initiation of HAEP to form the homopolymer of ε-CL, while BSP catalyzes the subsequent polycondensation of the ROP product to yield the copolymer with increased molecular weight. Furthermore, using suitable chemo-enzymatic methods, valuable polyesters with chiral (R)- or (S)-ibuprofen pendants can be tailor-made.