Biodegradable active composite hydrogel packaging for postharvest climacteric bananas preservation

Climacteric bananas are susceptible to endogenous ethylene and temperature, resulting in dehydration, accelerated senescence and deterioration. The widely-used plastic cling films is particularly complicated due to their high consumption and non-degradability. Herein, this study proposed to fabricate a carboxymethyl cellulose/polyvinyl alcohol/pyrazoic acid (CPP) hydrogel for postharvest banana preservation. The hydrogel demonstrated excellent potential as a packaging film, including natural degradability (complete degradation within 50 days), high tensile performance, transparent visibility and biosafety. As a validation experiment, bananas in a 30 °C environment confirmed the effectiveness of CPP hydrogels in banana postharvest preservation. Compared with the blank control and CP hydrogel, CPP packaging film delayed the processes of browning, dehydration, softening, nutrients loss, ripening and senescence in bananas, thereby maintaining their commercial value. Accordingly, this study demonstrates the potential of hydrogel materials as an alternative strategy to climacteric fruit preservation and plastic film.

Evaluation of ruminal methane and ammonia formation and microbiota composition as affected by supplements based on mixtures of tannins and essential oils using Rusitec

BACKGROUND

Dietary supplements based on tannin extracts or essential oil compounds (EOC) have been repeatedly reported as a promising feeding strategy to reduce the environmental impact of ruminant husbandry. A previous batch culture screening of various supplements identified selected mixtures with an enhanced potential to mitigate ruminal methane and ammonia formation. Among these, Q-2 (named after quebracho extract and EOC blend 2, composed of carvacrol, thymol, and eugenol) and C-10 (chestnut extract and EOC blend 10, consisting of oregano and thyme essential oils and limonene) have been investigated in detail in the present study with the semi-continuous rumen simulation technique (Rusitec) in three independent runs. For this purpose, Q-2 and C-10, dosed according to the previous study, were compared with a non-supplemented diet (negative control, NC) and with one supplemented with the commercial EOC-based Agolin® Ruminant (positive control, PC).

RESULTS

From d 5 to 10 of fermentation incubation liquid was collected and analysed for pH, ammonia, protozoa count, and gas composition. Feed residues were collected for the determination of ruminal degradability. On d 10, samples of incubation liquid were also characterised for bacterial, archaeal and fungal communities by high-throughput sequencing of 16S rRNA and 26S ribosomal large subunit gene amplicons. Regardless of the duration of the fermentation period, Q-2 and C-10 were similarly efficient as PC in mitigating either ammonia (-37% by Q-2, -34% by PC) or methane formation (-12% by C-10, -12% by PC). The PC was also responsible for lower feed degradability and bacterial and fungal richness, whereas Q-2 and C-10 effects, particularly on microbiome diversities, were limited compared to NC.

CONCLUSIONS

All additives showed the potential to mitigate methane or ammonia formation, or both, in vitro over a period of 10 d. However, several differences occurred between PC and Q-2/C-10, indicating different mechanisms of action. The pronounced defaunation caused by PC and its suggested consequences apparently determined at least part of the mitigant effects. Although the depressive effect on NDF degradability caused by Q-2 and C-10 might partially explain their mitigation properties, their mechanisms of action remain mostly to be elucidated.

Glycerol- and diglycerol-based polyesters: Evaluation of backbone alterations upon nano-formulation performance

Despite the success of polyethylene glycol-based (PEGylated) polyesters in the drug delivery and biomedical fields, concerns have arisen regarding PEG's immunogenicity and limited biodegradability. In addition, inherent limitations, including limited chemical handles as well as highly hydrophobic nature, can restrict their effectiveness in physiological conditions of the polyester counterpart. To address these matters, an increasing amount of research has been focused towards identifying alternatives to PEG. One promising strategy involves the use of bio-derived polyols, such as glycerol. In particular, glycerol is a hydrophilic, non-toxic, untapped waste resource and as other polyols, can be incorporated into polyesters via enzymatic catalysis routes. In the present study, a systematic screening is conducted focusing on the incorporation of 1,6-hexanediol (Hex) (hydrophobic diol) into both poly(glycerol adipate) (PGA) and poly(diglycerol adipate) (PDGA) at different (di)glycerol:hex ratios (30:70; 50:50 and 70:30 mol/mol) and its effect on purification upon NPs formation. By varying the amphiphilicity of the backbone, we demonstrated that minor adjustments influence the NPs formation, NPs stability, drug encapsulation, and degradation of these polymers, despite the high chemical similarity. Moreover, the best performing materials have shown good biocompatibility in both in vitro and in vivo (whole organism) tests. As preliminary result, the sample containing diglycerol and Hex in a 70:30 ratio, named as PDGA-Hex 30%, has shown to be the most promising candidate in this small library analysed. It demonstrated comparable stability to the glycerol-based samples in various media but exhibited superior encapsulation efficiency of a model hydrophobic dye. This in-depth investigation provides new insights into the design and modification of biodegradable (di)glycerol-based polyesters, potentially paving the way for more effective and sustainable PEG-free drug delivery nano-systems in the pharmaceutical and biomedical fields.

Porous Mg-Zn-Ca scaffolds for bone repair: a study on microstructure, mechanical properties and in vitro degradation behavior

Biodegradable porous Mg scaffolds are a promising approach to bone repair. In this work, 3D-spherical porous Mg-1.5Zn-0.2Ca (wt.%) scaffolds were prepared by vacuum infiltration casting technology, and MgF2 and fluorapatite coatings were designed to control the degradation behavior of Mg-based scaffolds. The results showed that the pores in Mg-based scaffolds were composed of the main spherical pores (450-600 μm) and interconnected pores (150-200 μm), and the porosity was up to 74.97%. Mg-based porous scaffolds exhibited sufficient mechanical properties with a compressive yield strength of about 4.04 MPa and elastic modulus of appropriately 0.23 GPa. Besides, both MgF2 coating and fluorapatite coating could effectively improve the corrosion resistance of porous Mg-based scaffolds. In conclusion, this research would provide data support and theoretical guidance for the application of biodegradable porous Mg-based scaffolds in bone tissue engineering.

Versatile, durable conductive networks assembled from MXene and sericin-modified carbon nanotube on polylactic acid textile micro-etched via deep eutectic solvent

Integration of polylactic acid (PLA) textiles with conductive MXene holds great promise for fabricating green electronic textiles (e-textiles) and reducing the risk of electronic waste. However, constructing robust conductive networks on PLA fibers remains challenging due to the susceptibility of MXene to oxidation and the hydrophobicity of PLA fibers. Here, we demonstrate a versatile, degradable, and durable e-textile by decorating the deep eutectic solvent (DES) micro-etched PLA textile with MXene and sericin-modified carbon nanotube hybrid (MXene@SSCNT). The co-assembly of MXene with SSCNT in water not only enhanced its oxidative stability but also formed synergistic conductive networks with biomimetic leaf-like nanostructures on PLA fiber. Consequently, the MXene@SSCNT coated PLA textile (MCP-textile) exhibited high electrical conductivity (5.5 Ω·sq-1), high electromagnetic interference (EMI) shielding efficiency (34.20 dB over X-band), excellent electrical heating performance (66.8 ℃, 5 V), and sensitive humidity response. Importantly, the interfacial bonding between the MXene@SSCNT and fibers was significantly enhanced by DES micro-etching, resulting in superior wash durability of MCP-textile. Furthermore, the MCP-textile also showed satisfactory breathability, flame retardancy, and degradability. Given these outstanding features, MCP-textile can serve as a green and versatile e-textile with tremendous potential in EMI shielding, personal thermal management, and respiratory monitoring.

An increase in Wharton's jelly membrane osteocompatibility by a genipin-cross-link

Wharton's Jelly (WJ) has attracted significant interest in the field of tissue healing thanks to its biological properties, including antibacterial activity and immunomodulation. However, due to the fast degradation and poor mechanical behavior in biological environment, its application in bone regeneration is compromised. Here, we proposed to use genipin as an efficient cross-linking agent to significantly improve the elasticity and the enzymatical stability of the WJ matrix. The degree of cross-linking, linear elastic moduli, and collagenase resistance varied over a wide range depending on genipin concentration. Furthermore, our results highlighted that an increase in genipin concentration led to a decreased surface wettability, therefore impairing cell attachment and proliferation. The genipin cross-linking prevented rapid in vitro and in vivo degradation, but led to an adverse host reaction and calcification. When implanted in the parietal bone defect, a limited parietal bone regeneration to the dura was observed. We conclude that genipin-cross-linked WJ is a versatile medical device however, a careful selection is required with regards to the genipin concentration.

Role of livestock-derived amendments in soil organic carbon stocks in forage crops

The use of organic amendments for forage production has been promoted in recent years due to the adoption of sustainable agricultural practices and the increasing cost of mineral fertilizers. Organic manures can contribute with an extra carbon to the soil to the potential addition of carbon stocks. This study aimed to measure the capacity of different organic amendments commonly available in livestock farms for forage fertilization to influence the rate of soil organic carbon (SOC) under future climate change conditions. For this purpose, on-farm processed exogenous organic matter (EOM) was analyzed for fiber and organic carbon mineralization to obtain the percentage of decomposable EOM and resistant EOM (DEOM and REOM, respectively). The RothC model was run in grasslands and forage maize under different scenarios considering specific DEOM and REOM values. The results showed that the degradability of amendments could influence SOC dynamics. The SOC of grasslands after 38 years of simulation differed by >30 % between compost and the liquid fraction of cattle slurry. Forage crops were simulated under the RCP8.5 scenario and fertilized with amendments at the recommended amounts of nitrogen for these crops. As a result, SOC stocks had a better response to organic fertilization in grassland, except under the application of the liquid fraction, with a decrease in SOC of 16 %. In cropland, only the solid fraction from mechanical separation of slurry and compost applications increased the SOC stock from 13 % to 26 % in the 2020-2090 period. Our study provides insights into how the degradability of EOM can affect simulations of the SOC stock rate over time.

Assessment of degradability and endothelialization of modified poly L-lactic acid (PLLA) atrial septal defect (ASD) occluders over time in vivo

OBJECTIVE

To evaluate the fiber-degradation and endothelialization of a modified poly L-lactic acid (PLLA) atrial septal defect (ASD) occluder for a long time in vivo.

METHODS

A total of 57 New Zealand rabbits were selected to establish the vasculature implantation model, which would be used to characterize the mechanical properties and pathological reaction of PLLA filaments (a raw polymer of ASD occluder). In total, 27 Experimental piglets were used to create the ASD model for the catheter implantation of PLLA ASD occluders. Then, X-ray imaging, transthoracic echocardiography, histopathology, and scanning electron microscope (SEM) were performed in the experimental animals at 3, 6, 12, and 24 months after implantation.

RESULTS

In the rabbit models, the fibrocystic grade was 0 and the inflammatory response was grade 2 at 6 months after vasculature implantation of the PLLA filaments. The mass loss of PLLA filaments increased appreciably with the increasing duration of implantation, but their mechanical strength was decreased without broken. In the porcine models, the cardiac gross anatomy showed that all PLLA ASD occluders were stable in the interatrial septum without any vegetation or thrombus formation. At 24 months, the occluders had been embedded into endogenous host tissue nearly. Pathological observations suggested that the occluders degraded gradually without complications at different periods. SEM showed that the occluders were endothelialized completely and essentially became an integral part of the body over time.

CONCLUSION

In the animal model, the modified PLLA ASD occluders exhibited good degradability and endothelialization in this long-term follow-up study.

Isolation and genomic characterization of Klebsiella Lw3 with polychlorinated biphenyl degradability

Bioremediation of sediment organic pollution has been intensely investigated, but the degradation of complex organic compounds, pesticide residues, and polychlorinated biphenyls (PCBs) remains poorly studied. In this study, sediments were collected from Zhanjiang Mangrove Reserve and inoculated in an inorganic salt medium using only biphenyl (BP) and PCBs as the carbon sources to obtain a PCB-degrading strain. A gram-negative bacterium that metabolized PCBs was isolated and identified as Klebsiella Lw3 by 16S rDNA phylogenetic analysis. Genomic sequencing showed that this bacterium possessed genes related to BP/PCB degradation, and its GC content was 58.2%; we identified 3326 cellular pathways. Gas chromatography-mass spectrometry was employed to test the PCB degrading ability; the results showed that the strain had a good degradation effect on PCB3 at concentrations of 5, 10, 20, 40, and 60 mg/L and that the final degradation rate was higher than 97% after 96 h. Interestingly, this strain showed good biodegradability of PCBs despite having no classical PCB degradation pathway, providing a new direction for Klebsiella research with practical significance for in situ bioremediation of PCB contamination. Overall, this study provides valuable insights into the genetic structure of PCB-degrading strains as well as eco-friendly and low-cost PCB degradation and lays a foundation for the discovery of new degradation pathways.

Identification of white degradable and non-degradable plastics in food field: A dynamic residual network coupled with hyperspectral technology

In the food field, with the improvement of people's health and environmental protection awareness, degradable plastics have become a trend to replace non-degradable plastics. However, their appearance is very similar, making it difficult to distinguish them. This work proposed a rapid identification method for white non-degradable and degradable plastics. Firstly, a hyperspectral imaging system was used to collect the hyperspectral images of the plastics in visible and near-infrared bands (380-1038 nm). Secondly, a residual network (ResNet) was designed according to the characteristics of hyperspectral information. Finally, a dynamic convolution module was introduced into the ResNet to establish a dynamic residual network (Dy-ResNet) to adaptively mine the data features and realize the classification of the degradable and non-degradable plastics. Dy-ResNet had better classification performance than the other classical deep learning methods. The classification accuracy of the degradable and non-degradable plastics was 99.06%. In conclusion, hyperspectral imaging technology was combined with Dy-ResNet to identify the white non-degradable and degradable plastics effectively.

Development of chitosan/konjac glucomannan/tragacanth gum tri-layer food packaging films incorporated with tannic acid and ε-polylysine based on mussel-inspired strategy

Constructing biodegradable food packaging with good mechanics, gas barrier and antibacterial properties to maintain food quality is still challenge. In this work, mussel-inspired bio-interface emerged as a tool for constructing functional multilayer films. Konjac glucomannan (KGM) and tragacanth gum (TG) with physical entangled network are introduced in the core layer. Cationic polypeptide ε-polylysine (ε-PLL) and chitosan (CS) producing cationic-π interaction with adjacent aromatic residues in tannic acid (TA) are introduced in the two-sided outer layer. The triple-layer film mimics the mussel adhesive bio-interface, where cationic residues in outer layers interact with negatively charged TG in the core layer. Furthermore, a series of physical tests showed excellent performance of triple-layer film with great mechanical properties (tensile strength (TS): 21.4 MPa, elongation at break (EAB): 7.9 %), UV-shielding (almost 0 % UV transmittance), thermal stability, water, and oxygen barrier (oxygen permeability (OP): 1.14 × 10^-3 g/m s Pa and water vapor permeability (WVP): 2.15 g mm/m² day kPa). In addition, the triple-layer film demonstrated advanced degradability, antimicrobial functions, and presented good moisture-proof performance for crackers, which can be potentially applied as dry food packaging.

Thickness-dependent release of microplastics and phthalic acid esters from polythene and biodegradable residual films in agricultural soils and its related productivity effects

It is crucial to elucidate the release rate of microplastics (MPs) and phthalic acid esters (PAEs) in agricultural soil and their effects on crop productivity regarding film types and thicknesses. To address this issue, two-year landfill test was performed using 0.016 mm-thick polyethylene (PEt1) & biodegradable (BIOt1), and 0.01 mm-thin polyethylene (PEt2) & biodegradable (BIOt2) residual films as materials with no landfill as CK. Scanning electron microscopy (SEM) and infrared analyses revealed that two-year landfill caused considerable changes in physical forms and spectral peaks in BIO film, which was more pronounced in thin BIO (36.90 % weight loss). Yet, less changes were presented in the above analyzes in polyethylene (PE) films, and thick films damaged relatively less. MPs number was 86,829.11 n/kg in BIOt1 and 134,912.27 n/kg in BIOt2, equivalent to 2.55 and 3.72 times higher than in PEt1 and PEt2, respectively. This was closely associated with PAEs release, as soil PAEs concentration was substantially lower in PEt1 (17.60 g/kg) and PEt2 (21.43 g/kg) than in BIOt1 and BIOt2 (37.12 g/kg and 49.20 g/kg), respectively. Furthermore, maize productivity parameters were negatively correlated with the amount of MPs and PAEs. BIOt2 and PEt1 had the lowest and highest grain yield, respectively. BIO exhibited greater environmental risk and adverse effects on soil and crop productivity than PE film due to physical degradation and release of PAEs. Thickness-wise comparison exhibited that thin film residues had more adverse effect relative to thick film ones.

A combination of matrix stiffness and degradability dictate microvascular network assembly and remodeling in cell-laden poly(ethylene glycol) hydrogels

The formation of functional capillary blood vessels that can sustain the metabolic demands of transplanted parenchymal cells remains one of the biggest challenges to the clinical realization of engineered tissues for regenerative medicine. As such, there remains a need to better understand the fundamental influences of the microenvironment on vascularization. Poly(ethylene glycol) (PEG) hydrogels have been widely adopted to interrogate the influence of matrix physicochemical properties on cellular phenotypes and morphogenetic programs, including the formation of microvascular networks, in part due to the ease with which their properties can be controlled. In this study, we co-encapsulated endothelial cells and fibroblasts in PEG-norbornene (PEGNB) hydrogels in which stiffness and degradability were tuned to assess their independent and synergistic effects on vessel network formation and cell-mediated matrix remodeling longitudinally. Specifically, we achieved a range of stiffnesses and differing rates of degradation by varying the crosslinking ratio of norbornenes to thiols and incorporating either one (sVPMS) or two (dVPMS) cleavage sites within the matrix metalloproteinase- (MMP-) sensitive crosslinker, respectively. In less degradable sVPMS gels, decreasing the crosslinking ratio (thereby decreasing the initial stiffness) supported enhanced vascularization. When degradability was increased in dVPMS gels, all crosslinking ratios supported robust vascularization regardless of initial mechanical properties. The vascularization in both conditions was coincident with the deposition of extracellular matrix proteins and cell-mediated stiffening, which was greater in dVPMS conditions after a week of culture. Collectively, these results indicate that enhanced cell-mediated remodeling of a PEG hydrogel, achieved either by reduced crosslinking or increased degradability, leads to more rapid vessel formation and higher degrees of cell-mediated stiffening.

A new view into three-dimensional excitation-emission matrix fluorescence spectroscopy for dissolved organic matter

Three-dimensional excitation-emission matrix fluorescence spectroscopy (3D EEMs) has been extensively used for dissolved organic matter (DOM) characterization. However, the application of 3D EEMs is constantly limited by issues such as contradictory component identification, confusing interpretation of spectral indicators, and inability to establish biodegradability. In this study, some improvements were proposed by investigating the 3D EEMs, spectral indicators, and degradability of the standard and representative DOM. To overcome the unclear identification of DOM components, it was recommended to partition 3D EEMs into three subareas: aromatic protein (New-I), humic-like (New-II), and soluble microbial by-product-like (New-III). Significant strong positive correlations (ρ = 0.727, P < 0.001) were observed between fluorescence index (FI) and biological index (BIX), and (R = 0.809, P < 0.001) humification index (HIX) and specific ultraviolet absorbance of 254 nm (SUVA₂₅₄). Except for FI (R = -0.483, P = 0.023), no other spectral indicators (P > 0.05) were found to be significantly correlated with molecular weight. As thence results, the FI and HIX were the most suitable indicators for evaluating DOM. The half-life (20 < 21 < 26 < 29 < 46 days) revealed that the degradability of individual DOM components was in the order of tyrosine > tryptophan > fulvic acid > protein > humic acid. The degradation dynamics were governed by first-order decay kinetics (R² = 0.91-0.99). This study clarified the fluorescence properties and degradability of DOM, as well as the reliability of spectral indicators. The degradation performance of individual DOM components engaged in the carbon cycling process was revealed, paving the path for further applications of 3D EEMs in DOM research.

Effects of Continuous Straw Returning on Soil Functional Microorganisms and Microbial Communities

This study examined the changes in soil enzymatic activity, microbial carbon source metabolic diversity, and straw decomposition rates in paddy fields treated with 1, 2, or 3 years of straw returning (SR1-SR3). The soil's ability to decompose straw and cellulolytic bacteria increased with the number of treatment years (1: 31.9% vs. 2: 43.9% vs. 3: 51.9%, P < 0.05). The numbers of Azotobacter, Nitrobacteria, cellulolytic bacteria, and inorganic phosphate bacteria increased progressively with the numbers of straw returning years. Cellulolytic bacteria and inorganic phosphate bacteria were significantly positively correlated with the decomposition rate (r = 0.783 and r = 0.375, P < 0.05). Based on 16S sequencing results, straw returning improved the microbial diversity of paddy soils by increasing unclassified bacteria and keeping dominant soil microorganism populations unchanged. The relative importance of individual microbial taxa was compared using random forest models. Proteobacteria, ammoniating bacteria, and potassium dissolving bacteria contributed to peroxidase activity. The significant contributors to phosphate monoesterase were Acidobacteriota, Desulfobacterota, ammoniating bacteria, cellulolytic bacteria, and potassium-dissolving bacteria. Proteobacteria, ammoniating bacteria, cellulolytic bacteria, and potassium-dissolving bacteria contributed to urease activity. Desulfobacterota, ammoniating bacteria, cellulolytic bacteria, and potassium-dissolving bacteria contributed to the neutral invertase activity. In conclusion, soil microbial community structure and function were affected within 2 years of straw returning, which was driven by the combined effects of soil organic carbon, available nitrogen, available potassium, and pH. With elapsing straw returning years, soil properties interacted with soil microbial communities, and a healthier soil micro-ecological environment would form.

Fate of typical organic halogen compounds in the coexistence of endogenic chlorine atoms and exogenic X. Chemosphere 2022;309:136761. [PMID: 36220428 DOI: 10.1016/j.chemosphere.2022.136761]

The transformation of halogenated organics in advanced oxidation processes (AOPs) has been extensively investigated. However, we currently know little about the fate of halogenated pollutants in the presence of exogenic halides (Cl^- or Br^-). Herein, the degradability, mineralization rate, and accumulation capacity of adsorbable organic halogen (AOX) for chlorophenols (2-chlorophenol (2-CP), 3-chlorophenol (3-CP), 4-chlorophenol (4-CP), and 2,4,6-trichlorophenol (TCP)) were compared in the Fe²⁺/persulfate (PS) process with the addition of exogenic halides. Results indicate that exogenic X^- can lead to a decrease in chlorophenols degradation and mineralization rate, undesirable accumulation of AOX, and generation of halogenated by-products which are more toxic than precursor chlorophenols. Results of kinetics modeling show that Cl₂^•- plays more important role than SO₄^•- with an addition of Cl^-, while SO₄^•-, Br₂^•-, and Br₂ are responsible for the effect of Br^-. As well, the effect of endogenic chlorine atoms on chlorophenols reveals that the degradability and AOX formation potential of 3-CP are highest while that of TCP are the lowest. This study demonstrates the significant influence of endogenic chlorine atoms and exogenic X^- on the fate of typical organic halogen compounds. Consequently, the X^- level and position/number of halogen atoms should be considered simultaneously when treating organohalogen compounds.

Bioplastics: known effects and potential consequences to marine and estuarine ecosystem services

Bioplastics have been suggested as more sustainable alternatives to conventional, petroleum-based plastics. In this work, the available studies comparing effects of biopolymers and petroleum-based plastics were reviewed to improve the knowledge on the sustainability of biobased polymers, providing a benchmark regarding their ecotoxicological effects, as well as to highlight research priorities in this field. The literature review shows that, only a small number of the available biopolymers have been tested highlighting the need for more research diversifying the tested polymers. Overall, the available studies support the idea that bioplastics are likely to cause physiological impairments (feeding, reproduction, or locomotion) as well as cellular (proteome and enzyme activity) effects on biota. Furthermore, the studies on bioplastic degradation under realistic conditions report changes in water and sediment quality, which may also have consequences to biota. It is evident that some reservations must be kept regarding conventional plastics substitutions by bioplastics.

Machine Learning Modeling of Protein-intrinsic Features Predicts Tractability of Targeted Protein Degradation

Targeted protein degradation (TPD) has rapidly emerged as a therapeutic modality to eliminate previously undruggable proteins by repurposing the cell's endogenous protein degradation machinery. However, the susceptibility of proteins for targeting by TPD approaches, termed "degradability", is largely unknown. Here, we developed a machine learning model, model-free analysis of protein degradability (MAPD), to predict degradability from features intrinsic to protein targets. MAPD shows accurate performance in predicting kinases that are degradable by TPD compounds [with an area under the precision-recall curve (AUPRC) of 0.759 and an area under the receiver operating characteristic curve (AUROC) of 0.775] and is likely generalizable to independent non-kinase proteins. We found five features with statistical significance to achieve optimal prediction, with ubiquitination potential being the most predictive. By structural modeling, we found that E2-accessible ubiquitination sites, but not lysine residues in general, are particularly associated with kinase degradability. Finally, we extended MAPD predictions to the entire proteome to find 964 disease-causing proteins (including proteins encoded by 278 cancer genes) that may be tractable to TPD drug development.

In vitro fermentation and production of methane and carbon dioxide from rations containing Moringa oleifera leave silage as a replacement of soybean meal: in vitro assessment

Plant leaf meal of some forage trees such as Moringa oleifera has attracted an increasing interest as a good and cheap source of protein. The present in vitro experiment employed the in vitro wireless gas production (GP) technique to evaluate the inclusion of M. oleifera leaves ensiled for 45 days as a replacement for soybean meal in rations. A control basal ration was formulated to contain 17.5% soybean meal as a source of protein. Soybean meal in the control ration was replaced with silage (MOS) at increasing levels of 0 to 100%. Replacing soybean meal with MOS gradually increased (P < 0.001) GP kinetics (asymptotic GP, rate of GP, and lag time of GP). However, soybean meal replacement decreased (P < 0.001) asymptotic methane (CH4) and carbon dioxide (CO2) productions, and rate of CH4 production and increased the lag time of CH4 and CO2 production. Gradual increases (P < 0.001) in the digestibility of dry matter, neutral detergent fiber and acid detergent fiber, ruminal bacteria count, fermentation pH, and the concentrations of ruminal total volatile fatty acids, acetate, and propionate were observed with rations containing MOS. Decreases in the digestibility of crude protein, ruminal protozoal count, and the concentrations of ruminal ammonia-N were observed with MOS rations. It is concluded soybean meal can be completely replaced by MOS with desirable effects on ruminal fermentation.

Polythioesters Prepared by Ring-Opening Polymerization of Cyclic Thioesters and Related Monomers

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polyesters with a wide range of applications; in particular, they currently stand as promising alternatives to conventional polyolefin-based "plastics". The introduction of sulfur atoms within the PHAs backbone can endow the resulting polythioesters (PTEs) with differentiated, sometimes enhanced thermal, optical and mechanical properties, thereby widening their versatility and use. Hence, PTEs have been gaining increasing attention over the past half-decade. This review highlights recent advances towards the synthesis of well-defined PTEs by ring-opening polymerization (ROP) of cyclic thioesters - namely thiolactones - as well as of S-carboxyanhydrides and thionolactones; it also covers the ring-opening copolymerization (ROCOP) of cyclic thioanhydrides or thiolactones with epoxides or episulfides. Most of the ROP reactions described are of anionic type, mediated by inorganic, organic or organometallic initiators/catalysts, along with a few enzymatic reactions as well. Emphasis is placed on the reactivity of the thio monomers, in relation to their ring-size ranging from 4- to 5-, 6- and 7-membered cycles, the nature of the catalyst/initiating systems implemented and their efficiency in terms of activity and control over the PTE molar mass, dispersity, topology, and microstructure.

Transformation products of sulfonamides in aquatic systems: Lessons learned from available environmental fate and behaviour data

Sulfonamides (SUAs) and their transformation products (TPs) contribute to environmental pollution. Importance of research on TPs' properties has been emphasised, e.g. allowing a comprehensive environmental risk assessment of their parent compounds. However, TPs' properties have been discussed in reviews on SUAs only marginally, if at all. For the first time, a scientific literature review aims to discuss the current state of knowledge on SUA-TPs including research gaps, and commonalities of SUA-TPs and TPs in general. Literature on SUA-TPs was consulted systematically to collect data on occurrence, physicochemical properties, degradability, and (eco)toxicity. TPs of 14 SUAs were reviewed, and aspects applicable for TPs in general were identified to guide future handling of TPs as a complex category of compounds. The data of sulfamethoxazole (SMX), the main representative, was analysed in more detail to discuss insights on a chemical level. Literature search resulted in 607 SUA-TPs reported in 222 publications. Only for 4%, 31%, and 35% of these TPs, data on occurrence in aquatic systems, on degradation, and (eco)toxicity, respectively, was found. Several mixtures of SUA-TPs were more ecotoxic than their parent compounds, e.g. 10 of 15 mixtures of SMX-TPs. Only few TPs were tested as single substance. Although several TPs could be eliminated experimentally, their mineralisation rate remained often unknown. Thus, further transformation to persistent TPs could not be ruled out. Standardised biodegradability tests of individual TPs would monitor their mineralisation rate, but are almost completely lacking. Reasons are likely poor availability of TPs, but also the focus on abiotic water treatment. Data assessment demonstrated that data of high significance according to standard methods, e.g. OECD methods for chronic (eco)toxicity and ready biodegradability, is needed to assess environmental risks of prioritised TPs, but also to redesign their parent pharmaceutical for complete environmental mineralisation in a long-term (Benign by Design).

Biomass-derived porous carbon with high drug adsorption capacity undergoes enzymatic and chemical degradation

Degradability is a key safety issue when choosing materials for biomedical applications and environmental protection. This factor greatly limits the application of porous carbon in these areas due to the inert and stable nature of carbon network. In this work, this conflict could be well-resolved by rational designing a mesoporous carbon (MC) with biomass as a carbon source. The retained oxygen-containing species simultaneously increase drug adsorption capacity and the degradability of MC. The maximum adsorption quantity for doxorubicin over MC can reach 395.3 mg/g, about 3-fold over carbon nanotubes. The detailed analysis reveals that the degradation of MC occurs via a radical mediated oxidation process. The high electron density feature of MC facilitates the electrophilic addition reaction in the presence of HO. During this process, the carbon network is gradually degraded into fragments, carbon nanodots and ultimately to CO₂. This work opens up a new way to fabricate degradable porous materials and provides a promising material for the practical application in biomedical and environmental field.

New frontiers in the discovery and development of PROTACs

Proteolysis targeting chimeras (PROTACs) are an emerging class of targeted protein degraders that coopt the intracellular degradation machinery to selectively deplete their respective targets. PROTACs act as bifunctional degraders that comprise ubiquitin E3 ligase- and target-binding moieties connected by chemical linkers with appropriate physicochemical properties. Through this bivalent structure, PROTACs induce the degradation of their targets via proximity-based pharmacology. Compared to conventional inhibitors, PROTACs exhibit superior pharmacologic properties with respect to efficacy, potency, selectivity, durability of response, and efficacy against undruggable proteins. Over the last few years, the scientific community has witnessed significant endeavors to advance this field and expand the armamentarium of PROTACs. In this perspective, we highlight these advances with an emphasis on emerging PROTAC variants, PROTACtability and degradability of protein targets, expression-guided PROTACs, multivalent PROTACs, preclinical resistance, candidates evaluated in clinical trials, and prospects for the use of PROTACs as a therapeutic modality.

A review of current challenges and prospects of magnesium and its alloy for bone implant applications

Medical application materials must meet multiple requirements, and the designed implant must mimic the bone structure in shape and support the formation of bone tissue (osteogenesis). Magnesium (Mg) alloys, as a "smart" biodegradable material and as "the green engineering material in the twenty-first century", have become an outstanding bone implant material due to their natural degradability, smart biocompatibility, and desirable mechanical properties. Magnesium is recognised as the next generation of orthopaedic appliances and bioresorbable scaffolds. At the same time, improving the mechanical properties and corrosion resistance of magnesium alloys is an urgent challenge to promote the application of magnesium alloys. Nevertheless, the excessively quick deterioration rate generally results in premature mechanical integrity disintegration and local hydrogen build-up, resulting in restricted clinical bone restoration applicability. The condition of Mg bone implants is thoroughly examined in this study. The relevant approaches to boost the corrosion resistance, including purification, alloying treatment, surface coating, and Mg-based metal matrix composite, are comprehensively revealed. These characteristics are reviewed to assess the progress of contemporary Mg-based biocomposites and alloys for biomedical applications. The fabricating techniques for Mg bone implants also are thoroughly investigated. Notably, laser-based additive manufacturing fabricates customised forms and complicated porous structures based on its distinctive additive manufacturing conception. Because of its high laser energy density and strong controllability, it is capable of fast heating and cooling, allowing it to modify the microstructure and performance. This review paper aims to provide more insight on the present challenges and continued research on Mg bone implants, highlighting some of the most important characteristics, challenges, and strategies for improving Mg bone implants.

In vitro biocompatiability and mechanical properties of bone adhesive tape composite based on poly(butyl fumarate)/poly(propylene fumarate)-diacrylate networks

Polyfumarate has been considered as injectable and biodegradable bone cement. However, its mechanical and degradation properties are particularly important. Therefore, the current study aimed to develop the properties by compositing poly (butyl fumarate)-based networks with hydroxyapatite nano-powders. In this regard, the poly (butyl fumarate) (PBF) matrix composite was compared with different components by evaluating their composition, mechanical properties, hydrophilicity, and biodegradability. Furthermore, their bioactivity in the phosphate-buffered saline (PBS) and, via applying mouse embryo osteoblast precursor cells (MC3T3-E1), their cell interaction, including adhesion, proliferation, and in vitro cytotoxicity assay, were assessed. The addition of hydroxyapatite improved the mechanical strength and modulus of PBF matrix composite. The composite reinforced with 3 wt% hydroxyapatite showed a higher lap-shear strength (1.68 MPa) and bonding strength (4.30 MPa), a maximum compression strength at fracture (95.18 MPa), modulus (925.29 MPa), and compression strength at yield (31.43 MPa), respectively. Also, hydrophilicity and in vitro degradation of the composite were enhanced in the presence of hydroxyapatite. In this condition, after a period of immersion (52 weeks) in PBS, the weight loss rate, and degradation rate of the composite increased. The composite proliferation, adhesion, and toxicity of MC3T3-E1 cells improved in comparison to the PBF matrix composite. Accordingly, controllable strength and degradation of the composite, along with its proven biocompatibility, make the composite a candidate for the treatment of comminuted fractures.

Three-dimensional printing of gyroid-structured composite bioceramic scaffolds with tuneable degradability

Customisation of bioactivity and degradability of porous bioceramic scaffolds is a formidable challenge in the field of regenerative medicine. In this study, we developed gyroid-structured ternary composite scaffolds (biphasic calcium phosphate (BCP) and 45S5 bioglass® (BG)) using digital light processing 3D printing technology based on material and structural design. Additionally, the mechanical strength, bioactivity, degradability, and biocompatibility of the composite ceramic scaffolds were evaluated. The results revealed that BG reacted with BCP to generate major active crystalline phases of CaSiO₃ and Na₃Ca₆(PO₄)₅. These active crystalline phases accelerated the exchange rate of Si⁴⁺, Ca²⁺, and PO₄^3- with HCO^3- in simulated body fluids and resulted in the rapid formation of carbonated hydroxyapatite (CHA), analogous to the formation of natural bone tissue. Interestingly, the precipitated CHA showed petal- and needle-like morphologies, which provided a large surface area to promote cell adhesion and proliferation. Furthermore, an increase in the BG content improved the degradability of ternary composite scaffolds after soaking in Tris-HCl solution. The tuneable degradability increased by three times at 30 wt% BG and sharply increased by 6.8 times at 40 wt% BG. This study provides a promising strategy to design scaffolds with improved bioactivity and tuneable degradability to assist a diverse population suffering from orthopedic conditions.

Mitigation of ruminal methane production with enhancing the fermentation by supplementation of different tropical forage legumes

The aim of this research was to evaluate the influence of forage species adapted to the tropical region of Ecuador on gas production, enteric methane, digestion, and ruminal fermentation. The tree forage evaluated were C. arborea, E. fusca, B. forficata, E. poeppigiana, C. argentea, G. sepium, C. tora, and F. macrophylla. Ruminal fluid of four adult sheep fistulated with permanent cannulas in the rumen was used in the in vitro gas production technique. The in vitro gas production parameters were lower (P < 0.05) in the C. arborea (A = 41.68 mL gas/g DM, c = 0.044%/h and Lag = 1.654 h) and the average gas production rate for B. forficata was 1.017 mL/h (P < 0.05). C. arborea presented higher (P = 0.0001) effective degradation and real DM digestibility (40.461 g/kg and 82.51 mg/g, respectively). With respect to VFA, the highest (P < 0.05) proportion of acetic, propionic, and butyric was observed in C. arborea, G. sepium, and E. poeppigiana (72.52, 23.09, and 7.44 mol/100 mol, respectively) and the lowest (P = 0.0001) ratio: acetic/propionic was observed in G. sepium (2.92 mol/100 mol). The content of NH₃-N (mg/L) showed no difference. The lowest (P = 0.0001) methane production was observed in C. arborea (1.23 mL CH₄/g DM). The use of forage species of tropical climate rich in secondary metabolites in ruminant diets has the capacity to reduce the gas production and enteric methane; however, this is at the expense of the reduction of the fermentation of organic matter in the rumen.

Influence of diets supplemented with naturally protected or unprotected eucalyptus oil on methane production and lactating buffalo productivity

This study was designed to investigate the influence of naturally protected eucalyptus oil supplementation in a form of leaves (EUL) or mature seed capsules (EUS) compared to crude eucalyptus oil (EUO). The control group (G₁) received a diet containing concentrate feed mixture, fresh berseem, rice straw, and corn silage, whereas the G2, G3, and G4 animals have a diet supplemented with 200 g/head/day of EUL or EUS or 4 mL/head/day EUO, respectively. Supplementation of EUL or EUS increased NH₃-N, short-chain fatty acids, and concentrations of acetic acid in vitro. Bacterial total count, protozoa, and cellulolytic bacteria increased (P < 0.05) with EUL and EUS supplementation. Methane production dropped (P < 0.05) with EUS, EUL, and EUO supplementation. Milk fat decreased (P < 0.05) with EUO supplementation, while an adverse trend was shown for lactose. No differences in feed conversion were found among EUS, EUL, and EUO. Blood total protein, albumin, and urea increased (P < 0.05) with supplementation of EUL or EUS compared to EUO. EUO supplementation yielded increased (P < 0.05) AST, ALT, glucose, and creatinine. Supplementation with EUL, EUS, or EUO decreased (P < 0.05) DM, OM, and CP digestibility, while digestibility of EE with supplementation by EUL, EUS, or EUO was higher (P < 0.05). The digestion coefficient of NDF and ADF decreased (P < 0.05) with supplemental EUL, EUS, or EUO compared to the G1 diet. Feeding EUS increased the values of TDN and DCP compared to EUL, which increased than EUO. Our results confirm that the naturally protected form of leaves or seeds mitigates the undesirable effects of directly supplementing crude eucalyptus oil.

Chitosan-based multifunctional flexible hemostatic bio-hydrogel

Realizing the potential application of chitosan as an effective biomedical hemostatic agent has become an emerging research hotspot. However, fabricating a flexible chitosan-based hemostatic bio-hydrogel with self-adhesion feature in humid conditions and rapid hemostasis capability remains a challenge. Herein, we reported the development of chitosan-based hydrogels (DCS-PEGSH gels) with typical multilevel pore structures, which were cross-linked by 3-(3,4-dihydroxyphenyl) propionic acid-modified chitosan (DCS) and sebacic acid-terminated polyethylene glycol modified by p-hydroxybenzaldehyde (PEGSH). By precisely regulating the proportion of PEGSH, the fabricated bio-hydrogels displayed favorable cytocompatibility, suitable stretchability (∼780%), and blood absorbability (1300% ± 50%). Moreover, the strong adhesion (∼68.5 kPa) of the assembled bio-hydrogel ensured its firm adherence on pigskin and on bleeding wound in both static and dynamic humid environments without shedding, thus providing a long service life. The fabricated hydrogels exhibited shorter blood clotting time (50 s) and lower blood clotting index (BCI, 41) than the commercial chitosan sponge (288 s, BCI 65). Notably, the amount of blood loss from the liver in mice was reduced by almost 90% as compared to that for the control group. This study paves a solid way for developing a chitosan-based hydrogel with self-adhesive, self-healing, stretchability, biocompatibility, and antibacterial and antioxidant properties through molecular design and structural regulation, which will enable the biomedical application of chitosan in emergency hemostasis, particularly in joints and extremities. STATEMENT OF SIGNIFICANCE: The design and preparation of multifunctional integrated green adhesive bio-hydrogels while avoiding the use of organic solvents and toxic chemical reagents has been an emerging challenge. Herein, a flexible chitosan-based hemostatic bio-hydrogel that integrates multifunctional properties was successfully synthesized. The bio-hydrogel displayed suitable stretchability (780%) and blood absorbability (1300% ± 50%). Moreover, the strong adhesion (68.5 kPa) ensured firm adherence of the assembled hydrogel on pigskin and on the bleeding wound site in both static and dynamic humid environments without shedding, thus providing a long service life. In addition, the designed hydrogel showed good compatibility and antibacterial performance. The dynamic Schiff base endowed the bio-hydrogel with excellent self-healing performance without any external stimuli.

Flexible and recyclable bio-based transient resistive memory enabled by self-healing polyimine membrane

The recyclable, self-healing and easily-degradable transient electronic technology has aroused tremendous attention in flexible electronic products. However, integrating the above advantages into one single flexible electronic device is still a huge challenge. Herein, we demonstrate a flexible and recyclable bio-based memory device using fish colloid as the resistive switching layer on a polyimine substrate, which affords reliable mechanical and electrical properties under repetitive conformal deformation operation. This flexible bio-based memory device presents potential analog behaviors including memory characteristics and excitatory current response, which undergoes incremental potentiation in conductance under successive electrical pulses. Moreover, this device is expected to greatly alleviate the environmental problems caused by electronic waste. It can be decomposed rapidly in water and well recycled, which is a promising candidate for transient memories and information security. We believe that this study can provide new possibilities to the field of high-performance transient electronics and flexible resistive memory devices.

Hydrogen-bonded silicene nanosheets of engineered bandgap and selective degradability for photodynamic therapy

Silicon, a highly biocompatible and ubiquitous chemical element in living systems, exhibits great potentials in biomedical applications. However, the silicon-based nanomaterials such as silica and porous silicon have been largely limited to only serving as carriers for delivery systems, due to the lack of intrinsic functionalities of silicon. This work presents the facile construction of a two-dimensional (2D) hydrogen-bonded silicene (H-silicene) nanosystem which is highlighted with tunable bandgap and selective degradability for tumor-specific photodynamic therapy facilely by surface covalent modification of hydrogen atoms. Briefly, the H-silicene nanosheet material is selectively degradable in normal neutral tissues but rather stable in the mildly acidic tumor microenvironment (TME) for achieving efficient photodynamic therapy (PDT). Such a 2D hydrogen-bonded silicene nanosystem featuring the tunable bandgap and tumor-selective degradability provides a new paradigm for the application of multi-functional two-dimensional silicon-based biomaterials towards the diagnosis and treatments of cancer and other diseases.

Organic- or Inorganic-based Nanomaterials: Opportunities and Challenges in the Selection for Biomedicine

Since the inception of nanotechnology, several efforts have been dedicated to fabricating diverse nanodevices with exceptional performance. These innovative constructs have been applied in medicine due to their tailorable physicochemical properties (chemical composition, optical activity, spectra, and charge) and morphological attributes (size, shape, and surface area). Moreover, these versatile nanomedicines could promisingly offer better performance over the conventional therapeutic strategies. Broadly speaking, in terms of chemical composition, nanobiomaterials are classified into two predominant categories of organic and inorganic-based components. Despite their success and enormous versatile advancements in the past two decades, the significant progress towards clinical translation has been hampered by their corresponding intrinsic limitations. In this perspective, we give a brief overview of these organic- and inorganic-based materials, highlighting opportunities and challenges towards their utilization in medicine. Finally, we provide an interesting outlook in lessons learned and looking forward to developing these materials, emphasizing their scope towards clinical translation.

Sulfur, fresh cassava root and urea independently enhanced gas production, ruminal characteristics and in vitro degradability

BACKGROUND

Total fresh cassava root (FCR) production was 275 million tonnes in 2018 which equals 61.1 % of the total production, and Thailand produced 10.7 % FCR of the total production. FCR is one of the main energy source for ruminant. The limitation of FCR utilization is due to the presence of hydrogen cyanide (HCN). The study aimed to evaluate the effect of sulfur, urea and FCR at various levels on in vitro gas production, ruminal fermentation and in vitro degradability. The study hypothesized that: (1) sulfur, urea and FCR have no interaction effect and (2) effect of FCR and urea is related to sulfur addition.

RESULTS

The study aimed to elucidate the optimum level of elemental sulfur, fresh cassava root (FCR) and urea and their effect on in vitro gas production, ruminal fermentation, thiocyanate concentration, and in vitro degradability. A 3 × 2 × 4 in a completely randomized design were conducted. Factor A was level of sulfur at 0 %, 1 and 2 % of concentrate dry matter (DM), factor B was level of urea at 2 and 4 % of concentrate DM, and factor C was level of the FCR at 0, 200, 300 and 400 mg DM of the total substrate. The study found that elemental sulfur, urea and FCR had no interaction effect on the kinetics of in vitro gas, ruminal fermentation, HCN and in vitro degradability. Elemental sulfur supplementation (P < 0.05) significantly increased the in vitro gas produced from an insoluble fraction (b), in vitro DM degradability and either neutral detergent fiber (NDF) or acid detergent fiber (ADF) degradability and propionate (C3) concentration while decreased the ruminal HCN concentration. Urea levels showed a (P < 0.05) significant increase of the potential extent of in vitro gas production, ruminal ammonia nitrogen (NH₃-N) and total volatile fatty acid (TVFA). Fresh cassava root supplementation (P < 0.05) significantly increased the in vitro gas produced from an immediate soluble fraction (a), in vitro gas produced from insoluble fraction, in vitro gas production rate constant, total VFA, C3 concentration and HCN while decreased ruminal pH, acetate and butyrate concentration. It could be concluded that 2 % elemental sulfur, 4 % urea and 300 mg FCR showed a greater effect on in vitro gas production, ruminal fermentation and HCN reduction.

CONCLUSIONS

The study found that elemental sulfur, urea, and FCR had no interaction effect on the kinetics of in vitro gas, total in vitro gas, ruminal fermentation, and HCN concentration. It could be concluded that 2 % elemental sulfur, 4 % urea, and 300 mg FCR showed a greater effect on in vitro gas production, ruminal fermentation, and HCN reduction.

Improved quantification method of crocins in saffron extract using HPLC-DAD after qualification by HPLC-DAD-MS

Crocins in commercial liquid saffron extracts (Saffr'activ®) were identified using high-performance liquid chromatography (HPLC) with a diode array detector (DAD) and mass spectrometry (MS). The impact of storage on the qualities of the saffron extract were studied with HPLC-DAD-MS by exposing trans-4-GG crocin to environmental factors. Light and temperature induced degradation after only one week. Trans-4-GG crocin was totally hydrolyzed when stored at 60 °C and exposed to light. A quick and reliable method using HPLC-DAD was then developed to improve quantification of crocins in commercial liquid saffron extracts. An internal standard quantification method that uses a response factor, corrected with the molecular weight of each crocin, improved results for old saffron extracts.

Inhibition of norfloxacin on anaerobic digestion: Focusing on the recoverability and shifted microbial communities

Antibacterial properties of norfloxacin (NOR) could cause adverse impact on engineered biological process. In this study, the objective was to investigate the inhibitory effects of NOR on anaerobic digestion focusing on the recoverability and microbial community changes. The effects of different concentrations of NOR on anaerobic digestion were studied with three continuous feed cycles. Results showed that NOR seriously inhibited the methane production with an 50% inhibitory concentration (IC₅₀) of 0.41 mM. In addition, with extending of exposure time, inhibitory effect increasingly strengthened and the IC₅₀ values decreased to 0.16 mM and 0.07 mM in the second and third feeding cycle, respectively. However, when the inhibitor in supernatant was removed, the performance recovered and the relative methane yield increased by 9 times from 25.38 mL/g VS to 257.05 mL/g VS. The transformation of NOR showed that the degradation of NOR in the anaerobic digestion was difficult and the recovery was due to the removal of NOR. The microbial analysis revealed that the inhibition of NOR on bacteria of Candidatus_Cloacimonas, Petrimonas, Ercella, Sphaerochaeta and hydrogenotrophic methanogens of Methanoculleus and Methanobacterium was recoverable when NOR was removed. However, it was irreversible for acetoclastic methanogen of Methanosaeta. These findings provided comprehensive understanding on the characteristics of NOR inhibition and also provided feasible strategy to recover the NOR inhibited anaerobic digestion.

Silkworm and spider silk electrospinning: a review

Issues of fossil fuel and plastic pollution are shifting public demand toward biopolymer-based textiles. For instance, silk, which has been traditionally used during at least 5 milleniums in China, is re-emerging in research and industry with the development of high-tech spinning methods. Various arthropods, e.g. insects and arachnids, produce silky proteinic fiber of unique properties such as resistance, elasticity, stickiness and toughness, that show huge potential for biomaterial applications. Compared to synthetic analogs, silk presents advantages of low density, degradability and versatility. Electrospinning allows the creation of nonwoven mats whose pore size and structure show unprecedented characteristics at the nanometric scale, versus classical weaving methods or modern techniques such as melt blowing. Electrospinning has recently allowed to produce silk scaffolds, with applications in regenerative medicine, drug delivery, depollution and filtration. Here we review silk production by the spinning apparatus of the silkworm Bombyx mori and the spiders Aranea diadematus and Nephila Clavipes. We present the biotechnological procedures to get silk proteins, and the preparation of a spinning dope for electrospinning. We discuss silk's mechanical properties in mats obtained from pure polymer dope and multi-composites. This review highlights the similarity between two very different yarn spinning techniques: biological and electrospinning processes.

Production and composition of Pleurotus ostreatus cultivated on Lithovit®-Amino25 supplemented spent substrate

Supplementation of the spent oyster substrate enhances its nutritional properties to produce a new mushroom cropping cycle. The study investigated the potential of a nano-fertilizer (Lithovit^®-Amino25) with an admixture of 25% L-amino acids on Pleurotus ostreatus production, proteins, and amino acid contents. The product applied at spawning (t1), after the first harvest (t2), and at both timings (t3), in two doses: 3 g/kg (C1) or 5 g/kg (C2). Compared with control (C0t0), the first harvest was earlier by 2.3-3.3 days in C1t1 and C2t1. The biological yield of the second harvest was improved by 28.0% in C2t2. Superior results were in C1t3 where the number of crops increased to four, biological efficiency was optimized (117.3%) at the third harvest, and biological and economic yields increased by 36.7% and 36.4%, respectively. Lignin was the most degraded in C1t3, while residual cellulose, hemicellulose, neutral detergent fiber, and acid detergent fiber were higher in all treated substrates than in control. In C2t1, mushrooms were the richest in proteins, while in C1t1, they were the richest in the essential amino acids threonine, valine, isoleucine, leucine, and histidine. Lithovit^®-Amino25 has a high potential for use in P. ostreatus production.

Optimality of poly-vinyl alcohol/starch/glycerol/citric acid in wound dressing applicable composite films

This work addresses response surface methodology (RSM) design based investigations to obtain optimality of quaternary formulations [variant macromolecular concentrations of starch (St, 5-10 w/w%), polyvinyl alcohol (PVA, 5-10 w/w%), citric acid (CA, 15-40 wt%) and glycerol (Gl, 15-40 wt%)] associated to wound dressing films. Appropriate combinations of the swelling index (SI), weight loss (WL%) during 27 days, tensile strength (TS) and percentage elongation (%E) have been considered during such studies. The optimized composition was achieved through RSM optimization and exhibited very good water absorption (300.5% SI) and flexibility (87.5%E), and acceptable in-vitro degradation (51.4% WL) and TS (5 MPa) values, which are significantly better than reported data. Further, the film constitution indicated amplified antibacterial effectiveness against both Gram-positive (Listeria monocytogenes) and Gram-negative (Escherichia coli) bacteria and enhanced cell growth (145.5%) to thereby infer upon the potential associated with its application as a viable wound dressing film.

Dynamics of degradation of high-quality tropical forage according to levels of nitrogen supplementation

The present study aimed to evaluate the degradation dynamics of high-quality tropical forage according to the levels of nitrogen supplementation. In this study, 4 rumen-fistulated cows with a body weight of 653 ± 47 kg were used. These animals were distributed in a 4 × 4 Latin square experimental design. Cows were kept under a grazing regime in an area formed by Panicum maximum Jacq. cv. Tanzania. These animals received 4 levels of crude protein (CP) in the supplements (122, 142, 162, and 180 g/kg of CP in DM). The degradability of dry matter (DM), crude protein (CP), and neutral detergent fiber (NDF) was determined by in situ incubation of forage samples at 0, 6, 12, 24, 48, 72, 96, and 120 h. Both the concentration of ammonia nitrogen (NH₃-N) and the microbial protein synthesis were affected by CP levels of the supplements (P < 0.05). There was a significant difference (P < 0.05) for fraction b, potential degradability, and effective degradability of DM and NDF, and for the c degradation rate of CP of Tanzania grass which had the highest values at 122 g/kg of CP. Overall, the greatest degradation of nutrients from Tanzania grass occurred in the diet with 122 g/kg of CP and 604 g/kg of NFC in dairy cattle supplements that resulted in the highest rates of nitrogen utilization by rumen microbes.

The influence of polycaporolacton fumarate coating on mechanical properties and in vitro behavior of porous diopside-hardystonite nano-composite scaffold

One of the significant challenges in bone tissue engineering is the fabrication of highly porous scaffolds with interconnected pores and appropriate mechanical properties. Artificial scaffolds which used in the field of medicine are usually made of single phase of polymer or ceramic. However, composition of these materials can produce the scaffolds with improve mechanical and biological properties.The aim of this study is to synthesize three-dimensional hardystonite-diopside (HT-Dio) porous scaffolds modified by polycaporolacton fumarate coating for low-load-bearing bone tissue engineering applications. The results showed that hardystonite scaffolds with 15 wt. % diopside and 6 w/v % polymer polycaporolacton fumarate (PCLF) had a significant bioactivity. The cell culture and cell attachment assay results revealed the well spreading of BMS cells on the surface of modified scaffolds which indicates the high biocompatibility of this scaffold. The modified scaffolds had a mean pore size, porosity, compressive strength, modules and toughness of 293.47 ± 5.51 μm, 74% ± 1.01, 3.37 ± 0.6 MPa, 151 ± 1.1 MPa and 31.3 ± 0.32 kJ/m³, respectively, which are in the appropriate range for spongy bone and hence can be a good candidate for bone tissue engineering applications.

A study on comparative feeding value of corn flakes according to temperature and retention time in the pressurized steam chamber

This study aimed to investigate the effects of temperature and retention time of the pressurized steam chamber on the ruminal fermentation characteristics and nutrient degradability of corn flakes in three Korean native Hanwoo cows and three Holstein cows implanted with a ruminal fistula. Corn kernels were categorized into 13 groups based on the chamber temperature (range, 100°C–116°C) and retention time (range, 700–950 s). The pH value was lowest in T1 regardless of breed. Propionate concentration was the highest in T2 (p < 0.05). Total-volatile fatty acid (VFA) concentration was slightly but not significantly greater in T2 than in other conditions. Dry matter (p < 0.05), starch, and crude protein (p < 0.05) degradability were the highest in T1. At different incubation times and with different breeds, dry matter, starch, and crude protein degradability of corn flakes were the highest in T1. Thus, the present results indicate that the optimal temperature and retention time of the pressurized steam chamber should be 100°C–105°C and 700–720 s.

Nutrient evaluation and ruminal degradation of dry matter and protein from amarula (Sclerocarya birrea), macadamia (integrifolia) and baobab (Adansonia digitata L.) oilcakes as dietary supplements for ruminants

Inadequate availability of feed ingredients significantly contributes to reduced animal production. Nutritional evaluation of feed ingredients for potential use in feed ration is key. Triplicate samples of oil extraction by-products viz.: amarula (Sclerocarya birrea), macadamia (integrifolia) and baobab (Adansonia digitata L.) oilcakes were analysed for proximate, mineral and amino acids content. To determine the in situ rumen degradability of dry matter (DM) and crude protein (CP) from the oilcakes, polyester bags were used to incubate triplicate subsamples of each oilcake in the ventral rumen of each of the three cannulated mid-lactating Holstein cows for 2, 4, 8, 16, 24, or 48 h. Amarula oilcake (AOC) had higher (P < 0.05) CP, ether extract and essential amino acid content than macadamia (MOC) and baobab (BOC) oilcakes. Fibre fractions were higher (P < 0.05) in MOC and BOC than in AOC. While calcium (Ca) and potassium (K) concentrations were high (P < 0.05) in MOC and BOC, phosphorus (P) concentration was high (P < 0.05) in AOC. The effective degradability of DM and water-soluble, rapidly degradable fractions of DM and CP were high (P < 0.05) in AOC. Insoluble but degradable fraction of CP was high (P < 0.00) in BOC and effective degradation of CP was high (P < 0.05) in AOC and BOC. The AOC with its high CP, EE and essential AA can be used as both protein and energy source for ruminants. Seemingly, MOC and BOC can be used as supplements for fibre as well as Ca and K in ruminant diets. Hence, these non-conventional oilcakes have the potential to partially replace conventional oilcakes in ruminant diets. Evaluation of growth performance, nitrogen digestion and carcass characteristics in ruminants fed diets containing the AOC, BOC and MOC are recommended.

Gas production from dredged sediment

The anaerobic degradation of sediment organic matter leads to considerable gas production in constructions made from sediments and in landfills where contaminated sediments are disposed of, inducing problems with the mechanical stability of constructions or necessitating extraction and treatment of gas. However, little is known about the magnitude of gas generation from dredged sediment, hence validated input parameters for gas production modelling are missing. On the occasion of drillings performed for the installation of inclinometers on a mono-landfill for contaminated dredged sediment, eleven waste layers of known were sampled. Samples were analysed for gas generation in a long-term laboratory incubation experiment carried out for 757 days. It was found that the residual gas potential of the deposited dredged material ranged between 2 and 12 m³ Mg_DW^-1, relating to 3-11% of the organic matter being degraded. Correlation analyses with material properties suggest a strong role of nitrogen, either directly or as indicative parameter, with the gas potential increasing with total nitrogen content and the share of degradable carbon decreasing with increasing TOC/TN ratio. The by far greatest share of organic matter was bound in the heavy density fraction >1.4 g cm^-3, suggesting that the readily available light organic matter pool had already been depleted during pre-treatment of the dredged sediment in dewatering fields and the subsequent years of landfilling. Consequently, the correlation of the remaining gas potential with heavy fraction nitrogen was even stronger than for bulk nitrogen. The gas potential as revealed from the long-term test correlated well with short-term values, but outreached the commonly applied potential measured for 21 days by the factor of four. The data improve the state of knowledge on gas production from the large mineral waste stream of dredged material and serve to improve gas production modelling for these types of wastes. The strong correlation of gas potential to TN suggests that TN may serve as a proxy to estimate total gas potential.

Tunable nonenzymatic degradability of N-substituted polyaspartamide main chain by amine protonation and alkyl spacer length in side chains for enhanced messenger RNA transfection efficiency

Degradability of polycations under physiological conditions is an attractive feature for their use in biomedical applications, such as the delivery of nucleic acids. This study aims to design polycations with tunable nonenzymatic degradability. A series of cationic N-substituted polyaspartamides were prepared to possess primary amine via various lengths of alkyl spacers in side chains. The degradation rate of each polyaspartamide derivative was determined by size exclusion chromatography under different pH conditions. The N-substituted polyaspartamide containing a 2-aminoethyl moiety in the side chain (PAsp(AE)) showed considerable degradability under physiological conditions (pH 7.4, 37 °C). In contrast, the N-substituted polyaspartamides bearing a longer alkyl spacer in the side chain, i.e. the 3-aminopropyl (PAsp(AP)) and 4-aminobutyl moieties (PAsp(AB)), more strongly suppressed degradation. Further, a positive correlation was observed between the degradation rate of N-substituted polyaspartamides and a deprotonation degree of primary amines in their side chains. Therefore, we conclude that the deprotonated primary amine in the side chain of N-substituted polyaspartamides can induce the degradation of the main chain through the activation of amide nitrogen in the side chain. When N-substituted polyaspartamides were utilized as a messenger RNA (mRNA) delivery vehicle via formation of polyion complexes (PICs), degradable PAsp(AE) elicited significantly higher mRNA expression efficiency in cultured cells compared to PAsp(AP) and PAsp(AB). The higher efficiency of PAsp(AE) might be due to the facilitated destabilization of PICs within the cells, directed toward mRNA release. Additionally, degradation of PAsp(AE) considerably reduced its cytotoxicity. Thus, our study highlights a useful design of well-defined cationic poly(amino acid)s with tunable nonenzymatic degradability.

Comparative study of some analytical methods to quantify lignin concentration in tropical grasses

Objective

Lignin plays a relevant role in the inhibition of cell wall (CW) structural carbohydrate degradation. Thus, obtaining accurate estimates of the lignin content in tropical plants is important in order to properly characterize the mechanism of lignin action on CW degradation. Comparing conflicting results between the different methods available for commercial use will bring insight on the subject. This way, providing data to better understand the relationship between lignin concentration and implications with tropical forage degradation.

Methods

Five grass species, Brachiaria brizantha cv Marandú, Brachiaria brizantha cv Xaraés (MG-5), Panicum maximum cv Mombaça, Pennisetum purpureum cv Cameroon, and Pennisetum purpureum cv Napier, were harvested at five maturity stages. Acid detergent lignin (ADL), Klason lignin (KL), acetyl bromide lignin (ABL), and permanganate lignin (PerL) were measured on all species. Lignin concentration was correlated with in vitro degradability.

Results

Highly significant effects for maturity, lignin method and their interaction on lignin content were observed. The ADL, KL and ABL methods had similar negative correlations with degradability. The PerL method failed to reliably estimate the degradability of tropical grasses, possibly due to interference of other substances potentially soluble in the KMnO₄ solution.

Conclusion

ADL and KL methods use strong acid (H₂SO₄) and require determination of ash and N content in the lignin residues, therefore, increasing time and cost of analysis. The ABL method has no need for such corrections and is a fast and a convenient method for determination of total lignin content in plants, thus, it may be a good option for routine laboratory analysis.

Enhancing immunogenicity of antigens through sustained intradermal delivery using chitosan microneedles with a patch-dissolvable design

Reducing the dosage required for vaccination is highly desirable, particularly in cases of epidemic emergencies. This study evaluated the potential of a chitosan microneedle (MN) system with a patch-dissolvable design for low-dose immunization. This system comprises antigen-loaded chitosan MNs and a hydrophilic polyvinyl alcohol/polyvinyl pyrrolidone supporting array patch, which provides extra strength to achieve complete MN insertion and then quickly dissolves in the skin to reduce patch-induced skin irritation. After insertion, MNs could be directly implanted in the dermal layer as an intradermal (ID) depot to allow a sustained release of the model antigen ovalbumin (OVA) for up to 28 days. We found that rats immunized with MNs containing low-dose OVA (approximately 200 μg) had persistently high antibody levels for 18 weeks, which were significantly higher than those observed after an intramuscular injection of full-dose OVA (approximately 500 μg), demonstrating at least 2.5-fold dose sparing. Moreover, OVA-encapsulated chitosan MNs had superior immunogenicity to OVA plus chitosan solution, indicating that MN-based delivery and prolonged skin exposure can further enhance chitosan's adjuvanticity. Therefore, this patch-dissolvable MN system offers a needle-free, accurate, and reliable ID delivery of antigens and has potential as a sustained ID delivery device to improve vaccine efficacy and facilitate dose sparing with existing vaccines.

STATEMENT OF SIGNIFICANCE

This study developed implantable chitosan microneedles (MNs) with a patch-dissolvable design for the sustained intradermal (ID) delivery of antigens and demonstrated their antigen dose-sparing potential. We found that rats immunized with chitosan MNs containing low-dose OVA had persistently high antibody levels for 18 weeks, which were significantly higher than those observed after an intramuscular injection of full-dose OVA, demonstrating at least 2.5-fold dose sparing. Our results indicate that chitosan MNs can not only serve as an efficient vaccine delivery system but also exert their promising adjuvant activity by forming an ID depot for prolonged antigen exposure and activating dendritic cells for promoting immune responses.

Mechanical and degradation properties of advanced platelet-rich fibrin (A-PRF), concentrated growth factors (CGF), and platelet-poor plasma-derived fibrin (PPTF)

BACKGROUND

Fibrin clot membranes prepared from advanced platelet-rich fibrin (A-PRF) or concentrated growth factors (CGF), despite their relatively rapid biodegradability, have been used as bioactive barrier membranes for alveolar bone tissue regeneration. As the membranes degrade, it is thought that the growth factors are gradually released. However, the mechanical and degradable properties of these membranes have not well been characterized. The purpose of this study was to mechanically and chemically characterize these membranes.

METHODS

A-PRF and CGF clots were prepared from blood samples collected from non-smoking, healthy donors and were compressed to form 1-mm-thick membranes. Platelet-poor plasma-derived fibrin (PPTF) clots were prepared by adding bovine thrombin to platelet-poor plasma. A tensile test was performed at the speed of 1 mm/min. Morphology of the fibrin fibers was examined by SEM. A digestion test was performed in PBS containing trypsin and EDTA.

RESULTS

In the tensile test, statistical difference was not observed in Young's modulus, strain at break, or maximum stress between A-PRF and CGF. In strain at break, PPTF was significantly weaker than CGF. Likewise, fibrin fiber thickness and crosslink density of PPTF were less than those of other membranes, and PPTF degraded faster than others.

CONCLUSIONS

Although the centrifugal conditions are different, A-PRF and CGF are prepared by essentially identical mechanisms. Therefore, it is conceivable that both membranes have similar mechanical and chemical properties. Only PPTF, which was prepared by a different mechanism, was characterized as mechanically weaker and enzymatically more degradable.

Novel high-strength, low-alloys Zn-Mg (<0.1wt% Mg) and their arterial biodegradation

It is still an open challenge to find a biodegradable metallic material exhibiting sufficient mechanical properties and degradation behavior to serve as an arterial stent. In this study, Zn-Mg alloys of 0.002 (Zn-002Mg), 0.005 (Zn-005Mg) and 0.08wt% Mg (Zn-08Mg) content were cast, extruded and drawn to 0.25mm diameter, and evaluated as potential biodegradable stent materials. Structural analysis confirmed formation of Mg₂Zn₁₁ intermetallic in all three alloys with the average grain size decreasing with increasing Mg content. Tensile testing, fractography analysis and micro hardness measurements showed the best integration of strength, ductility and hardness for the Zn-08Mg alloy. Yield strength, tensile strength, and elongation to failure values of >200-300MPa, >300-400MPa, and >30% respectively, were recorded for Zn-08Mg. This metal appears to be the first formulated biodegradable material that satisfies benchmark values desirable for endovascular stenting. Unfortunately, the alloy reveals signs of age hardening and strain rate sensitivity, which need to be addressed before using this metal for stenting. The explants of Zn-08Mg alloy residing in the abdominal aorta of adult male Sprague-Dawley rats for 1.5, 3, 4.5, 6 and 11months demonstrated similar, yet slightly elevated inflammation and neointimal activation for the alloy relative to what was recently reported for pure zinc.

Free ammonia pre-treatment of secondary sludge significantly increases anaerobic methane production

Energy recovery in the form of methane from sludge/wastewater is restricted by the poor and slow biodegradability of secondary sludge. An innovative pre-treatment technology using free ammonia (FA, i.e. NH₃) was proposed in this study to increase anaerobic methane production. The solubilisation of secondary sludge was significantly increased after FA pre-treatment at up to 680 mg NH₃-N/L for 1 day, under which the solubilisation (i.e. 0.4 mg SCOD/mg VS; SCOD: soluble chemical oxygen demand; VS: volatile solids) was >10 times higher than that without FA pre-treatment (i.e. 0.03 mg SCOD/mg VS). Biochemical methane potential assays showed that FA pre-treatment at above 250 mg NH₃-N/L is effective in improving anaerobic methane production. The highest improvement in biochemical methane potential (B₀) and hydrolysis rate (k) was achieved at FA concentrations of 420-680 mg NH₃-N/L, and was determined as approximately 22% (from 160 to 195 L CH₄/kg VS added) and 140% (from 0.22 to 0.53 d^-1) compared to the secondary sludge without pre-treatment. More analysis revealed that the FA induced improvement in B₀ and k could be attributed to the rapidly biodegradable substances rather than the slowly biodegradable substances. Economic and environmental analyses showed that the FA-based technology is economically favourable and environmentally friendly. Since this FA technology aims to use the wastewater treatment plants (WWTPs) waste (i.e. anaerobic digestion liquor) to enhance methane production from the WWTPs, it will set an example for the paradigm shift of the WWTPs from 'linear economy' to 'circular economy'.

Low-temperature thermal pre-treatment of municipal wastewater sludge: Process optimization and effects on solubilization and anaerobic degradation

The present study examines the relationship between the degree of solubilization and biodegradability of wastewater sludge in anaerobic digestion as a result of low-temperature thermal pre-treatment. The main effect of thermal pre-treatment is the disintegration of cell membranes and thus solubilization of organic compounds. There is an established correlation between chemical oxygen demand (COD) solubilization and temperature of thermal pre-treatment, but results of thermal pre-treatment in terms of biodegradability are not well understood. Aiming to determine the impact of low temperature treatments on biogas production, the thermal pre-treatment process was first optimized based on an experimental design study on waste activated sludge in batch mode. The optimum temperature, reaction time and pH of the process were determined to be 80 °C, 5 h and pH 10, respectively. All three factors had a strong individual effect (p < 0.001), with a significant interaction effect for temp. pH² (p = 0.002). Thermal pre-treatments, carried out on seven different municipal wastewater sludges at the above optimum operating conditions, produced increased COD solubilization of 18.3 ± 7.5% and VSS reduction of 27.7 ± 12.3% compared to the untreated sludges. The solubilization of proteins was significantly higher than carbohydrates. Methane produced in biochemical methane potential (BMP) tests, indicated initial higher rates (p = 0.0013) for the thermally treated samples (k_hyd up to 5 times higher), although the ultimate methane yields were not significantly affected by the treatment.