New Approaches to the Analysis of Enzymatically Hydrolyzed Methyl Cellulose. Part 2. Comparison of Various Enzyme Preparations

Composition mapping of highly substituted cellulose-ether monomers by liquid chromatography-mass spectrometry and probability-based data deconvolution

Cellulose ethers (CEs) are semi-synthetic polymers produced by derivatization of natural cellulose, yielding highly substituted products such as ethyl hydroxyethyl cellulose (EHEC) or methyl ethyl hydroxyethyl cellulose (MEHEC). CEs are commonly applied as pharmaceutical excipients and thickening agents in paints and drymix mortars. CE properties, such as high viscosity in solution, solubility, and bio-stability are of high interest to achieve required product qualities, which may be strongly affected by the substitution pattern obtained after derivatization. The average and molar degree of substitution often cannot explain functional differences observed among CE batches, and more in-depth analysis is needed. In this work, a new method was developed for the comprehensive mapping of the substitution degree and composition of β-glucose monomers of CE samples. To this end, CEs were acid-hydrolyzed and then analyzed by gradient reversed-phase liquid chromatography-mass spectrometry (LC-MS) using an acid-stable LC column and time-of-flight (TOF) mass spectrometer. LC-MS provided monomer resolution based on ethylene oxide, hydroxyl, and terminating methyl/ethyl content, allowing the assignment of detailed compositional distributions. An essential further distinction of constitutional isomer distributions was achieved using an in-house developed probability-based deconvolution algorithm. Aided by differential heat maps for visualization and straightforward interpretation of the measured LC-MS data, compositional variation between bio-stable and non-bio-stable CEs could be identified using this new approach. Moreover, it disclosed unexpected methylations in EHEC samples. Overall, the obtained molecular information on relevant CE samples demonstrated the method's potential for the study of CE structure-property relationships.

Analysis of the Heterogeneities of First and Second Order of Cellulose Derivatives: A Complex Challenge

The complexity of the substituent distribution in polysaccharide derivatives is discussed and defined. The challenges regarding analytical characterization that results from various interrelated categories of distributions, including molecular weight, chemical composition, and microstructure, are outlined. Due to these convoluted levels of complexity, results should always be interpreted with carefulness. Various analytical approaches which have been applied to starch and cellulose derivatives are recapped, including enzymatic, mass spectrometric, and chromatographic methods. The relation of heterogeneities of first and second order among and along the polysaccharide chains is addressed. Finally, examples of own analytical work on cellulose ethers are presented, including the MS analysis of methyl cellulose (MC) blends and fractionation studies of fully esterified MC, especially its 4-methoxybenzoates by gradient HPLC on normal phase. Preparative fractionation according to the degree of substitution (DS) allows follow-up analysis in order to get more detailed information on the substituent distribution in such sub-fractions.

Biomacromolecules as tools and objects in nanometrology-current challenges and perspectives

Nucleic acids, proteins, and polysaccharides are the most important classes of biopolymers. The inherent properties of biomacromolecules are contrary to those of well-defined small molecules consequently raising a number of specific challenges which become particularly apparent if biomacromolecules are treated as objects in quantitative analysis. At the same time, their specific functional ability of molecular recognition and self-organization (e.g., enzymes, antibodies, DNA) enables us to make biomacromolecules serving as molecular tools in biochemistry and molecular biology, or as precisely controllable dimensional platforms for nanometrological applications. Given the complexity of biomacromolecules, quantitative analysis is not limited to the measurement of their concentration but also involves the determination of numerous descriptors related to structure, interaction, activity, and function. Among the biomacromolecules, glycans set examples that quantitative characterization is not necessarily directed to the measurement of amount-of-substance concentration but instead involves the determination of relative proportions (molar ratios) of structural features for comparison with theoretical models. This article addresses current activities to combine optical techniques such as Raman spectroscopy with isotope dilution approaches to realize reference measurement procedures for the quantification of protein biomarkers as an alternative to mass spectrometry-based techniques. Furthermore, it is explored how established ID-MS protocols are being modified to make them applicable for quantifying virus proteins to measure the HIV viral load in blood samples. As an example from the class of carbohydrates, the challenges in accurate determination of substitution patterns are outlined and discussed. Finally, it is presented that biomacromolecules can also serve as tools in quantitative measurements of dimensions with an example of DNA origami to generate defined dimensional standards to be used for calibration in super-resolution fluorescence microscopy. Graphical abstract Quantitative analysis of biomacromolecules is accompanied with special challenges different from low molecular weight compounds. In addition, they are not only objects but also tools applicable for quantitative measurements.

Thermo-reversible injectable gel based on enzymatically-chopped low molecular weight methylcellulose for exenatide and FGF 21 delivery to treat types 1 and 2 diabetes

Diabetes is the fastest growing metabolic disease that fails to utilize glucose properly due to insulin deficiency or insulin resistance. Although several limited studies demonstrated non-invasive means of protein delivery, major hurdles for commercial success such as short half-life, enzymatic degradation and low bioavailability still remain to overcome. Methylcellulose (MC), a hydrophobically-modified cellulose derivative, forms temperature reversible gel in aqueous solution. However, as the gelling temperature of MC is higher than body temperature, it should be lowered to below body temperature for practical clinical application. In order to decrease gelling temperature and increase bio-compatibility and bio-elimination of MC, the molecular weight of MC was decreased using enzymatic degradation method and confirmed by gel permeation chromatography. Bio-elimination of low molecular weight (LMw) MC was confirmed with non-invasive live image and ex vivo experiment. The exenatide and FGF 21 were physically loaded 100% into LMwMC-based thermo-reversible gel and slowly released from gel with no initial bursts. Exenatide-loaded LMwMC gel showed reduction of blood glucose level for a week in type 1 diabetic animal model. FGF 21-loaded LMwMC gel reduced glucose level to normal condition and maintained over 10 days in type 2 diabetic animal model. LMwMC-based thermo-reversible and injectable hydrogel provides a strong potential to be efficient protein drug delivery system for the treatment of type 1 and type 2 diabetes.

Low-molecular-weight methylcellulose-based thermo-reversible gel/pluronic micelle combination system for local and sustained docetaxel delivery

PURPOSE

To develop low-molecular-weight methylcellulose (LMw MC)-based gel/Pluronic F127 micelle combination system for local and sustained delivery of docetaxel (DTX).

METHODS

LMw MC and Pluronic F127 were used to formulate an injectable thermo-reversible gel/micelle combination system containing DTX. The DTX-loaded combination system was characterized and its therapeutic efficacy evaluated in a subcutaneous tumor model.

RESULTS

Mixtures of LMw MC, AS, and Pluronic F127 formed gel at ~15-40°C depending on AS concentration. The combination system released DTX for >30 days with a biphasic and sustained release pattern, and DTX stability was maintained during release. The combination system significantly enhanced anti-cancer effects of DTX and prolonged survival of the model mouse in comparison with free DTX.

CONCLUSIONS

The LMw MC gel/Pluronic F127 micelle combination system constitutes a promising tool for reducing tumor size and eradicating remaining tumor cells before and after surgery.

Quantitative aspects in electrospray ionization ion trap and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of malto-oligosaccharides

Mass spectrometry is widely applied in carbohydrate analysis, but still quantitative evaluation of data is critical due to different ionization efficiencies of the constituents in a mixture. Different size and chemical structure of the analytes cause their uneven distribution in droplets (electrospray ionization, ESI) or matrix spots (matrix-assisted laser desorption/ionization, MALDI). In addition, instrumental parameters affect final ion yields. In order to study and optimize the latter, an equimolar mixture of malto-oligosaccharides (DP1-6) was analyzed using varying target masses for ESI as well as different matrices and laser power for MALDI. The sodium adducts and derivatives for positive ion mode (hydrazones with Girard's T Reagent, GT) and negative ion mode (reductively aminated with o-aminobenzoic acid, oABA) were studied. Negatively charged oABA-labeled malto-oligosaccharides turned out to be unsuitable for quantification of the malto-oligomeric composition. Best agreement was achieved when applying target masses in the range of the highest homolog in the mixture in electrospray ionization ion trap (ESI-IT) (1-2% deviation with GT label or as Na(+) adducts). Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) gave best results when the laser power was adjusted significantly over the desorption/ionization threshold (1% deviation with GT label). Both parameters show significant influence on the determined oligomeric composition. Consequently, estimation and even quantitative determination of amounts of oligosaccharides in a mixture can be achieved when the analytes are labeled and the proper instrumental parameters are used.

Chemical structure analysis of starch and cellulose derivatives

Starch and cellulose are the most abundant and important representatives of renewable biomass. Since the mid-19th century their properties have been changed by chemical modification for commercial and scientific purposes, and there substituted polymers have found a wide range of applications. However, the inherent polydispersity and supramolecular organization of starch and cellulose cause the products resulting from their modification to display high complexity. Chemical composition analysis of these mixtures is therefore a challenging task. Detailed knowledge on substitution patterns is fundamental for understanding structure-property relationships in modified cellulose and starch, and thus also for the improvement of reproducibility and rational design of properties. Substitution patterns resulting from kinetically or thermodynamically controlled reactions show certain preferences for the three available hydroxyl functions in (1→4)-linked glucans. Spurlin, seventy years ago, was the first to describe this in an idealized model, and nowadays this model has been extended and related to the next hierarchical levels, namely, the substituent distribution in and over the polymer chains. This structural complexity, with its implications for data interpretation, and the analytical approaches developed for its investigation are outlined in this article. Strategies and methods for the determination of the average degree of substitution (DS), monomer composition, and substitution patterns at the polymer level are presented and discussed with respect to their limitations and interpretability. Nuclear magnetic resonance spectroscopy, chromatography, capillary electrophoresis, and modern mass spectrometry (MS), including tandem MS, are the main instrumental techniques employed, in combination with appropriate sample preparation by chemical and enzymatic methods.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: an update for the period 2005-2006

This review is the fourth update of the original review, published in 1999, on the application of MALDI mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2006. The review covers fundamental studies, fragmentation of carbohydrate ions, method developments, and applications of the technique to the analysis of different types of carbohydrate. Specific compound classes that are covered include carbohydrate polymers from plants, N- and O-linked glycans from glycoproteins, glycated proteins, glycolipids from bacteria, glycosides, and various other natural products. There is a short section on the use of MALDI-TOF mass spectrometry for the study of enzymes involved in glycan processing, a section on industrial processes, particularly the development of biopharmaceuticals and a section on the use of MALDI-MS to monitor products of chemical synthesis of carbohydrates. Large carbohydrate-protein complexes and glycodendrimers are highlighted in this final section.

Liquid chromatography combined with mass spectrometry for the investigation of endoglucanase selectivity on carboxymethyl cellulose

Endoglucanases are useful tools in the chemical structure analysis of cellulose derivatives. However, knowledge on the endoglucanase selectivity, which is of central importance for data interpretation, is still limited. In this study, new reverse-phase liquid chromatography mass spectrometry (LC-MS) methods were developed to investigate the selectivity of the endoglucanases Cel5A, Cel7B, Cel45A, and Cel74A from the filamentous fungus Trichoderma reesei. The aim was to improve the identification of the regioisomers in the complex mixtures that are obtained after enzymatic hydrolysis. Reduction followed by per-O-methylation was performed in order to improve the separation in reverse-phase LC, increase MS sensitivity, and to facilitate structure analysis by MS/MS of O-carboxymethyl glucose and cellooligosaccharides. The cellulose selective enzymes that were investigated displayed interesting differences in enzyme selectivity on CMC substrates.

Molecular flexibility of methylcelluloses of differing degree of substitution by combined sedimentation and viscosity analysis

The flexibility/rigidity of methylcelluloses (MCs) plays an important part in their structure-function relationship and therefore on their commercial applications in the food and biomedical industries. In the present study, two MCs of low degree of substitution (DS) 1.09 and 1.32 and four of high DS (1.80, 1.86, 1.88 and 1.93) were characterised in distilled water in terms of intrinsic viscosity [h]; sedimentation coefficient (s020,w) and weight average molar mass (Mw). Solution conformation and flexibility were estimated qualitatively using conformation zoning and quantitatively (persistence length Lp) using the new combined global method. Sedimentation conformation zoning showed an extended coil (Type C) conformation and the global method applied to each MC sample yielded persistence lengths all within the range Lp(1/4)12-17 nm (for a fixed mass per unit length) with no evidence of any significant change in flexibility with DS.

A New Approach for Studying Correlations between the Chemical Structure and the Rheological Properties in Carboxymethyl Cellulose

Two model sodium carboxymethyl celluloses (CMC) with similar monomer composition but with significant differences in the viscoelastic properties, that could not be assigned to variations in the average molar mass or molar mass distribution, were investigated with respect to the fraction of nonsubstituted cellulose segments in the polymers. The CMCs were hydrolyzed by a purified highly selective endoglucanase. The average molar mass and molar mass distribution of the enzyme products, as measured by size-exclusion chromatography with online multi-angle light scattering and refractive index detection (SEC/MALS/RI), revealed that the enzyme-catalyzed hydrolysis was more effective on one of the CMCs. To investigate whether this was due to a higher fraction of nonsubstituted cellulose segments in the polymer, the concentrations of nonsubstituted enzyme products, e.g., cellotetraose and cellopentaose, were measured by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). It was concluded that the two CMCs displayed significant differences in the fraction of nonsubstituted cellulose segments. Furthermore, the CMC with the strongest attractive intermolecular interactions, according to rheometry, also contained the highest fraction of nonsubstituted cellulose segments.

Bioconversion of municipal solid waste to glucose for bio-ethanol production

Selected biodegradable municipal solid waste fractions were subjected to fifteen different pre-hydrolysis treatments to obtain the highest glucose yield for bio-ethanol production. Pre-hydrolysis treatments consisted of dilute acid (H(2)SO(4), HNO(3) or HCl, 1 and 4%, 180 min, 60 degrees C), steam treatment (121 and 134 degrees C, 15 min), microwave treatment (700 W, 2 min) or a combination of two of them. Enzymatic hydrolysis was carried out with Trichoderma reesei and Trichoderma viride (10 and 60 FPU g(-1) substrate). Glucose yields were compared using a factorial experimental design. The highest glucose yield (72.80%) was obtained with a pre-hydrolysis treatment consisting of H(2)SO(4) at 1% concentration, followed by steam treatment at 121 degrees C, and enzymatic hydrolysis with Trichoderma viride at 60 FPU g(-1) substrate. The contribution of enzyme loading and acid concentration was significantly higher (49.39 and 47.70%, respectively), than the contribution of temperature during steam treatment (0.13%) to the glucose yield.

Determination of reducing ends with flow injection analysis with amperometric detection: application to enzyme-hydrolysed methyl cellulose

A novel method for detection of reducing ends of sugars is proposed, based on the use of [Formula: see text] as the oxidant in combination with amperometric detection and flow injection analysis (FIA). The method is very sensitive, giving values of <10 muM for the limit of detection for a series of mono- and oligosaccharides. Samples can be analysed every 30 s, and injection can be made fully automated, making it possible to perform on-line analysis of polysaccharide samples subjected to hydrolysis. Three methylcelluloses (MC) of different qualities were hydrolysed with three different glucanases, and the concentrations of reducing ends prior to, during and after hydrolysis were determined. Differences were observed between the results obtained using different combinations of enzymes and MCs, which revealed different selectivities of the various enzymes for the different substrates. One MC was also hydrolysed and analysed in real-time for three hours. The method proposed is superior to many of the standard methods used today, which require manual labour and have a lower sensitivity.

New Approaches to the Analysis of Enzymatically Hydrolyzed Methyl Cellulose. Part 1. Investigation of the Influence of Structural Parameters on the Extent of Degradation

Six methyl celluloses (MCs), one with a degree of substitution (DS) of 1.32 and five with DS between 1.83 and 1.88, were thoroughly investigated. Monomer composition and methyl distribution in the polymer chain were analyzed after total or partial random hydrolysis and appropriate derivatization with gas chromatography (GC) and mass spectrometry (MS), respectively, and used as reference data. The same MCs were then hydrolyzed with an enzyme preparation of Trichoderma longibrachiatum and further investigated with size-exclusion chromatography with multiangle light scattering and refractive index detection (SEC-MALS/RI) and MS. Electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI) in combination with various MS analyzers were compared with respect to quantification of the degradation products directly and after perdeuteriomethylation. The methyl group distribution in the oligomeric fractions and the average DS as a function of chain length were calculated from ESI mass spectra. With help of the reference analysis, patterns could be corrected for the unspecific contribution of end groups. By labeling and ESI tandem MS, our knowledge about the tolerance of the enzymes' sub-sites with respect to the number of methyl groups could be improved.