Biocompatible, detachable, and free-standing polyelectrolyte multilayer films

Bioactive Synthetic Polymer-Based Polyelectrolyte LbL Coating Assembly on Surface Treated AZ31-Mg Alloys

Polyelectrolyte layer-by-layer (LbL) films on pretreated Mg containing 3 wt.% Al and 1 wt.% Zn (MgAZ31) alloy surfaces were prepared under physiological conditions offering improved bioresponse and corrosive protection. Pretreatments of the model MgAZ31 substrate surfaces were performed by alkaline and fluoride coating methods. The anti-corrosion and cytocompatibility behavior of pretreated substrates were evaluated. The LbL film assembly consisted of an initial layer of polyethyleneimine (PEI), followed by alternate layers of poly (lactic-co-glycolic acid) (PLGA) and poly (allylamine hydrochloride) (PAH), which self-arrange via electrostatic interactions on the pretreated MgAZ31 alloy substrate surface. The physicochemical characterization, surface morphologies, and microstructures of the LbL films were investigated using Fourier-transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The in vitro stability studies related to the LbL coatings confirmed that the surface treatments are imperative to achieve the lasting stability of PLGA/PAH layers. Electrochemical impedance spectroscopy measurements demonstrated that pretreated and LbL multilayered coated substrates enhanced the corrosion resistance of the bare MgAZ31 alloy. Cytocompatibility studies using human mesenchymal stem cells seeded directly over the substrates showed that the pretreated and LbL-generated surfaces were more cytocompatible, displaying reduced cytotoxicity than the bare MgAZ31. The release of bovine serum albumin protein from the LbL films was also studied. The initial data presented cooperatively demonstrate the promise of creating LbL layers on Mg-related bioresorbable scaffolds to obtain improved surface bio-related activity.

Green approaches for extraction, chemical modification and processing of marine polysaccharides for biomedical applications

Over the past few decades, natural-origin polysaccharides have received increasing attention across different fields of application, including biomedicine and biotechnology, because of their specific physicochemical and biological properties that have afforded the fabrication of a plethora of multifunctional devices for healthcare applications. More recently, marine raw materials from fisheries and aquaculture have emerged as a highly sustainable approach to convert marine biomass into added-value polysaccharides for human benefit. Nowadays, significant efforts have been made to combine such circular bio-based approach with cost-effective and environmentally-friendly technologies that enable the isolation of marine-origin polysaccharides up to the final construction of a biomedical device, thus developing an entirely sustainable pipeline. In this regard, the present review intends to provide an up-to-date outlook on the current green extraction methodologies of marine-origin polysaccharides and their molecular engineering toolbox for designing a multitude of biomaterial platforms for healthcare. Furthermore, we discuss how to foster circular bio-based approaches to pursue the further development of added-value biomedical devices, while preserving the marine ecosystem.

Free-standing multilayer films as growth factor reservoirs for future wound dressing applications

Chronic skin wounds place a high burden on patients and health care systems. The use of angiogenic and mitogenic growth factors can facilitate the healing but growth factors are quickly inactivated by the wound environment if added exogenously. Here, free-standing multilayer films (FSF) are fabricated from chitosan and alginate as opposing polyelectrolytes in an alternating manner using layer-by-layer technique. One hundred bilayers form an about 450 μm thick, detachable free-standing film that is subsequently crosslinked by either ethyl (dimethylaminopropyl) carbodiimide combined with N-hydroxysuccinimide (E-FSF) or genipin (G-FSF). The characterization of swelling, oxygen permeability and crosslinking density shows reduced swelling and oxygen permeability for both crosslinked films compared to non-crosslinked films (N-FSF). Loading of fibroblast growth factor 2 (FGF2) into the films results in a sustained release from crosslinked FSF in comparison to non-crosslinked FSF. Biocompatibility studies in vitro with human dermal fibroblasts cultured underneath the films demonstrate increased cell growth and cell migration for all films with and without FGF2. Especially G-FSF loaded with FGF2 greatly increases cell proliferation and migration. In vivo biocompatibility studies by subcutaneous implantation in mice show that E-FSF causes an inflammatory tissue response that is absent in the case of G-FSF. N-FSF also represents a biocompatible film but shows early degradation. All FSF possess antibacterial properties against gram+ and gram- bacteria demonstrated by an agar diffusion disc assay. In summary, FSF made of alginate and chitosan crosslinked with genipin can act as a reservoir for the sustained release of FGF2, possessing high biocompatibility in vitro and in vivo. Moreover, G-FSF promotes growth and migration of human dermal fibroblasts and has antibacterial properties, which makes it an interesting candidate for bioactive wound.

Layer-by-layer assembly methods and their biomedical applications

Various biomedical applications arising due to the development of different LbL assembly methods with unique process properties.

Spin-coated freestanding films for biomedical applications

Spin-coating is a widely employed technique for the fabrication of thin-film coatings over large areas with smooth and homogeneous surfaces. In recent years, research has extended the scope of spin-coating by developing methods involving the interface of the substrate and the deposited solution to obtain self-supported films, also called freestanding films. Thereby, such structures have been developed for a wide range of areas. Biomedical applications of spin-coated freestanding films include wound dressings, drug delivery, and biosensing. This review will discuss the fundamental physical and chemical processes governing the conventional spin-coating as well as the techniques to obtain freestanding films. Furthermore, developments within this field with a primary focus on tissue engineering applications will be reviewed.

Layer-By-Layer Assemblies of Biopolymers: Build-Up, Mechanical Stability and Molecular Dynamics

Rapid development of versatile layer-by-layer technology has resulted in important breakthroughs in the understanding of the nature of molecular interactions in multilayer assemblies made of polyelectrolytes. Nowadays, polyelectrolyte multilayers (PEM) are considered to be non-equilibrium and highly dynamic structures. High interest in biomedical applications of PEMs has attracted attention to PEMs made of biopolymers. Recent studies suggest that biopolymer dynamics determines the fate and the properties of such PEMs; however, deciphering, predicting and controlling the dynamics of polymers remains a challenge. This review brings together the up-to-date knowledge of the role of molecular dynamics in multilayers assembled from biopolymers. We discuss how molecular dynamics determines the properties of these PEMs from the nano to the macro scale, focusing on its role in PEM formation and non-enzymatic degradation. We summarize the factors allowing the control of molecular dynamics within PEMs, and therefore to tailor polymer multilayers on demand.

Polysaccharide Coating of Gelatin Gels for Controlled BSA Release

Self-assembly of natural polymers constitute a powerful route for the development of functional materials. In particular, layer-by-layer (LBL) assembly constitutes a versatile technique for the nanostructuration of biobased polymers into multilayer films. Gelatin has gained much attention for its abundance, biodegradability, and excellent gel-forming properties. However, gelatin gels melt at low temperature, thus limiting its practical application. With respect to the above considerations, here, we explored the potential application of gelatin gels as a matrix for protein delivery at physiological temperature. A model protein, bovine serum albumin (BSA), was encapsulated within gelatin gels and then coated with a different number of bilayers of alginate and chitosan (10, 25, 50) in order to modify the diffusion barrier. The coated gel samples were analyzed by means of Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) and confocal Raman spectroscopy, and it was found that the multilayer coatings onto polymer film were interpenetrated to some extent within the gelatin. The obtained results inferred that the coating of gelatin gels with polysaccharide multilayer film increased the thermal stability of gelatin gels and modulated the BSA release. Finally, the influence of a number of bilayers onto the drug release mechanism was determined. The Ritger-Peppas model was found to be the most accurate to describe the diffusion mechanism.

Photodetachable Adhesion

Peeling from strong adhesion is hard, and sometimes painful. Herein, an approach is described to achieve both strong adhesion and easy detachment. The latter is triggered, on-demand, through an exposure to light of a certain frequency range. The principle of photodetachable adhesion is first demonstrated using two hydrogels as adherends. Each hydrogel has a covalent polymer network, but does not have functional groups for bonding, so that the two hydrogels by themselves adhere poorly. The two hydrogels, however, adhere strongly when an aqueous solution of polymer chains is spread on the surfaces of the hydrogels and is triggered to form a stitching polymer network in situ, in topological entanglement with the pre-existing polymer networks of the two hydrogels. The two hydrogels detach easily when the stitching polymer network is so functionalized that it undergoes a gel-sol transition in response to a UV light. For example, two pieces of alginate-polyacrylamide hydrogels achieve adhesion energies about 1400 and 10 J m^-2 , respectively, before and after the UV radiation. Experiments are conducted to study the physics and chemistry of this strong and photodetachable adhesion, and to adhere and detach various materials, including hydrogels, elastomers, and inorganic solids.

Layer-by-layer adsorption: Factors affecting the choice of substrates and polymers

The electrostatic layer-by-layer technique for fabrication of multi-layered structures of various sizes and shapes using flat and colloidal templates coupled with polyelectrolyte layer-forming materials has attracted significant interest among both academic and industrial researchers due to its versatility and relative simplicity of the procedures involved in its execution. Fabrication of the multi-layered structures using the electrostatic layer-by-layer method involves several distinct stages each of which holds great importance when considering the production of a high-quality product. These stages include selection of materials (both template and a pair of construction polyelectrolytes), adsorption of the first polyelectrolyte layer onto the selected templates, formation of the second layer comprised of the oppositely charged polyelectrolyte and guided by the interactions between the two chosen polyelectrolytes, and multi-layering, where a selected number of layers are produced, and which is conditioned by both intrinsic properties of the involved construction materials and external fabrication conditions such as temperature, pH and ionic strength. The current review summarises the most important aspects of each stage mentioned above and gives examples of the materials suitable for utilization of the technique and describes the underlying physics involved.

Adhesive free-standing multilayer films containing sulfated levan for biomedical applications

This work is the first reporting the use of layer-by-layer to produce adhesive free-standing (FS) films fully produced using natural-based macromolecules: chitosan (CHI), alginate (ALG) and sulfated levan (L-S). The deposition conditions of the natural polymers were studied through zeta potential measurements and quartz crystal microbalance with dissipation monitoring analysis. The properties of the FS films were evaluated and compared with the control ones composed of only CHI and ALG in order to assess the influence of levan polysaccharide introduced in the multilayers. Tensile tests, dynamic mechanical analysis and single lap shear strength tests were performed to evaluate the mechanical properties of the prepared FS films. The presence of L-S conferred both higher tensile strength and shear strength to the developed FS membranes. The results showed an adhesion strength 4 times higher than the control (CHI/ALG) FS films demonstrating the adhesive character of the FS films containing L-S. Morphological and topography studies were carried out revealing that the crosslinking reaction granted the L-S based FS film with a higher roughness and surface homogeneity. Preliminary biological assays were performed by cultivating myoblasts cells on the surface of the produced FS films. Both crosslinked and uncrosslinked FS films containing L-S were cytocompatible and myoconductive.

STATEMENT OF SIGNIFICANCE

Sutures remain as the "gold standard" for wound closure and bleeding control; however they still have limitations such as, high infection rate, inconvenience in handling, and concern over possible transmission of blood-borne disease through the use of needles. One of the challenges of tissue engineering consist on the design and development of biocompatible tissue adhesives and sealants with high adhesion properties to repair or attach devices to tissues. In this work, the introduction of sulfated levan (L-S) on multilayered free-standing membranes was proposed to confer adhesive properties. Moreover, the films were myoconductive even in the absence of crosslinking just by the presence of L-S. This study provides a promising strategy to develop biological adhesives and for cardiac tissue engineering applications.

Engineered tubular structures based on chitosan for tissue engineering applications

The development of versatile tubular structures is a subject of broad interest in tissue engineering applications. Herein, we demonstrate the production of tubular structures based on chitosan through a combination of dipping, freeze-drying and supercritical technology approaches. The combination of these techniques yields versatile tubes with a perfectly defined hollow imprint, which upon chemical cross-linking with genipin acquire enhanced mechanical properties (Young Modulus ( E) and ultimate tensile stress (σ_max)), as well as improved stability in wet conditions. The biological performance reveals that cells remain attached, well-spread and viable on the surface of cross-linked tubes. As so, is envisioned that our methodology opens up new avenues on tissue engineering approaches, where the design of tubular structures with tuned length, diameter and elasticity is required.

* Engineering Membranes for Bone Regeneration

This review is focused on the use of membranes for the specific application of bone regeneration. The first section focuses on the relevance of membranes in this context and what are the specifications that they should possess to improve the regeneration of bone. Afterward, several techniques to engineer bone membranes by using "bulk"-like methods are discussed, where different parameters to induce bone formation are disclosed in a way to have desirable structural and functional properties. Subsequently, the production of nanostructured membranes using a bottom-up approach is discussed by highlighting the main advances in the field of bone regeneration. Primordial importance is given to the promotion of osteoconductive and osteoinductive capability during the membrane design. Whenever possible, the films prepared using different techniques are compared in terms of handability, bone guiding ability, osteoinductivity, adequate mechanical properties, or biodegradability. A last chapter contemplates membranes only composed by cells, disclosing their potential to regenerate bone.

The hepatocyte proteome in organotypic rat liver models and the influence of the local microenvironment

BACKGROUND

Liver models that closely mimic the in vivo microenvironment are useful for understanding liver functions, capabilities, and intercellular communication processes. Three-dimensional (3D) liver models assembled using hepatocytes and liver sinusoidal endothelial cells (LSECs) separated by a polyelectrolyte multilayer (PEM) provide a functional system while also permitting isolation of individual cell types for proteomic analyses.

METHODS

To better understand the mechanisms and processes that underlie liver model function, hepatocytes were maintained as monolayers and 3D PEM-based formats in the presence or absence of primary LSECs. The resulting hepatocyte proteomes, the proteins in the PEM, and extracellular levels of urea, albumin and glucose after three days of culture were compared.

RESULTS

All systems were ketogenic and found to release glucose. The presence of the PEM led to increases in proteins associated with both mitochondrial and peroxisomal-based β-oxidation. The PEMs also limited production of structural and migratory proteins associated with dedifferentiation. The presence of LSECs increased levels of Phase I and Phase II biotransformation enzymes as well as several proteins associated with the endoplasmic reticulum and extracellular matrix remodeling. The proteomic analysis of the PEMs indicated that there was no significant change after three days of culture. These results are discussed in relation to liver model function.

CONCLUSIONS

Heterotypic cell-cell and cell-ECM interactions exert different effects on hepatocyte functions and phenotypes.

Tuning cell adhesive properties via layer-by-layer assembly of chitosan and alginate

Understanding the mechanisms controlling cell-multilayer film interactions is crucial to the successful engineering of these coatings for biotechnological and biomedical applications. Herein, we present a strategy to tune the cell adhesive properties of multilayers based on marine polysaccharides with and without cross-linking and/or coating with extracellular matrix proteins. Chemical cross-linking of multilayers improved mechanical properties of the coatings but also elicited changes in surface chemistry that alter the adhesion of human umbilical vein endothelial cells. We evaluated a strategy to decouple the mechanical and chemical properties of these films, enabling the transition from cell-adhesive to cell-resistant multilayers. Addition of chitosan/alginate multilayers on top of cross-linked films decreased endothelial cell adhesion, spreading, and proliferation to similar levels as uncross-linked films. Our findings highlight the key role of surface chemistry in cell-multilayer film interactions, and these engineered nanocoatings represent a tunable model of cell adhesive and non-adhesive multilayered films.

STATEMENT OF SIGNIFICANCE

Multilayered films based on marine-derived polysaccharides were obtained by layer-by-layer (LbL). Biological tests with human umbilical vein endothelial cells (HUVECs) showed the potential of these films to tailor cell adhesion, spreading and proliferation. These multilayered films promise to be versatile and tunable model of cell adhesive and non-adhesive films.

Using a biocompatible diazidecrosslinker to fabricate a robust polyelectrolyte multilayer film with enhanced effects on cell proliferation

Due to the noncovalent interactions between the layers of polyelectrolyte films, the layer-by-layer assembled multilayered films always face the challenge of low film stiffness and chemical stability under extreme conditions. To handle this issue, we incorporated 4,4'-diazostilbene-2,2'-disulfonic acid disodium salt (DAS) as a crosslinker and subsequently photocrosslinked the layers of a poly(allylamine hydrochloride)/catalase multilayered film. The results showed that DAS could stabilize the prepared film in a manner similar to the traditional cross-linker glutaraldehyde. The multilayered film showed good biocompatibility with a positive effect on cell proliferation. Therefore, by using the commercially available DAS crosslinker, we provide a synthesis-free and biocompatible method to stabilize polyelectrolyte multilayers for broad and significant applications in biological fields, e.g., varying crosslinking density to adjust the mechanical strength of biomaterials, stabilizing susceptible biofilms, or introducing functional groups onto cell membranes.

The design of antimicrobial LL37-modified collagen-hyaluronic acid detachable multilayers

The design of antimicrobial membranes and thin films are critical for the design of biomaterials that can combat bacterial contamination. Since the long-term use of conventional antibiotics can result in bacterial resistance, there is a critical need to incorporate natural antimicrobial peptides (AMPs) that not only prevent a wide range of pathogens from causing infections but can also promote many beneficial outcomes in wounded tissues. We report the design and antimicrobial properties of detachable collagen (COL)/hyaluronic acid (HA) polyelectrolyte multilayers (PEMs) modified with LL-37, a naturally occurring human AMP. LL-37 was physically adsorbed and chemically immobilized on the surface of PEMs. The antimicrobial and cytotoxic properties of PEMs were tested with Gram-negative Escherichia coli (E. coli, strain DH10B) and primary rat hepatocytes, respectively. The ability to prevent bacterial adhesion and to neutralize an E. coli layer was investigated as a function of LL-37 concentration. An interesting trend was that even unmodified PEMs exhibited a 40% reduction in bacterial adhesion. When LL-37 was physically adsorbed on PEMs, bacterial adhesion was significantly lower on the surface of the films as well as in the surrounding broth. Immobilizing LL-37 resulted in less than 3% bacterial adhesion on the surface due to the presence of the peptide. LL-37 modified PEMs did not result in any cytotoxicity up to input concentrations of 16μM. More importantly, urea and albumin secretion by hepatocytes were unaffected even at high LL-37 concentrations. The COL/HA PEMs can serve as antimicrobial coatings, biological membranes and as in vitro platforms to investigate pathogen-tissue interactions.

STATEMENT OF SIGNIFICANCE

Antimicrobial peptides (AMPs) are emerging as an alternative to conventional antibiotics. We report the antimicrobial properties of detachable collagen (COL)/hyaluronic acid (HA) polyelectrolyte multilayers (PEMs) modified with LL-37, a human AMP. The antimicrobial and cytotoxic properties were tested with gram-negative Escherichia coli (E. coli, strain DH10B) and primary rat hepatocytes, respectively. Unmodified PEMs exhibited a 40% reduction in bacterial adhesion. When LL-37 was physically adsorbed on PEMs, the sustained release of the active peptide killed planktonic bacteria. Immobilizing LL-37 resulted in less than 3% bacterial adhesion. LL-37 modified PEMs did not result in cytotoxicity up to input concentrations of 16μM. The COL/HA PEMs can serve as antimicrobial coatings and to investigate pathogen-cell interactions.

Biomimetic Extracellular Environment Based on Natural Origin Polyelectrolyte Multilayers

Surface modification of biomaterials is a well-known approach to enable an adequate biointerface between the implant and the surrounding tissue, dictating the initial acceptance or rejection of the implantable device. Since its discovery in early 1990s layer-by-layer (LbL) approaches have become a popular and attractive technique to functionalize the biomaterials surface and also engineering various types of objects such as capsules, hollow tubes, and freestanding membranes in a controllable and versatile manner. Such versatility enables the incorporation of different nanostructured building blocks, including natural biopolymers, which appear as promising biomimetic multilayered systems due to their similarity to human tissues. In this review, the potential of natural origin polymer-based multilayers is highlighted in hopes of a better understanding of the mechanisms behind its use as building blocks of LbL assembly. A deep overview on the recent progresses achieved in the design, fabrication, and applications of natural origin multilayered films is provided. Such films may lead to novel biomimetic approaches for various biomedical applications, such as tissue engineering, regenerative medicine, implantable devices, cell-based biosensors, diagnostic systems, and basic cell biology.

Elastic chitosan/chondroitin sulfate multilayer membranes

Freestanding multilayered films were obtained using layer-by-layer (LbL) technology from the assembly of natural polyelectrolytes, namely chitosan (CHT) and chondroitin sulfate (CS). The morphology and the transparency of the membranes were evaluated. The influence of genipin (1 and 2 mg ml(-1)), a naturally-derived crosslinker agent, was also investigated in the control of the mechanical properties of the CHT/CS membranes. The water uptake ability can be tailored by changing the crosslinker concentration that also controls the Young's modulus and ultimate tensile strength. The maximum extension tends to decrease upon crosslinking with the highest genipin concentration, compromising the elastic properties of CHT/CS membranes: nevertheless, when using a lower genipin concentration, the ultimate tensile stress is similar to the non-crosslinked one, but exhibits a significantly higher modulus. Moreover, the crosslinked multilayer membranes exhibited shape memory properties, through a simple hydration action. The in vitro biological assays showed better L929 cell adhesion and proliferation when using the crosslinked membranes and confirmed the non-cytotoxicity of the developed CHT/CS membranes. Within this research work, we were able to construct freestanding biomimetic multilayer structures with tailored swelling, mechanical and biological properties that could find applicability in a variety of biomedical applications.

Enzymatic Degradation of Polysaccharide-Based Layer-by-Layer Structures

The lack of knowledge on the degradation of layer-by-layer structures is one of the causes hindering its translation to preclinical assays. The enzymatic degradation of chitosan/hyaluronic acid films in the form of ultrathin films, freestanding membranes, and microcapsules was studied resorting to hyaluronidase. The reduction of the thickness of ultrathin films was dependent on the hyaluronidase concentration, leading to thickness and topography variations. Freestanding membranes exhibited accelerated weight loss up to 120 h in the presence of the enzyme, achieving complete degradation. Microcapsules with around 5 μm loaded simultaneously with FITC-BSA and hyaluronidase showed that the coencapsulation of such enzyme and protein mixture led to a FITC-BSA release four times higher than in the absence of hyaluronidase. The results suggest that the degradation of LbL devices may be tuned via embedded enzymes, namely, in the controlled release of active agents in biomedical applications.

Polysaccharide-based freestanding multilayered membranes exhibiting reversible switchable properties

The design of self-standing multilayered structures based on biopolymers has been attracting increasing interest due to their potential in the biomedical field. However, their use has been limited due to their gel-like properties. Herein, we report the combination of covalent and ionic cross-linking, using natural and non-cytotoxic cross-linkers, such as genipin and calcium chloride (CaCl2). Combining both cross-linking types the mechanical properties of the multilayers increased and the water uptake ability decreased. The ionic cross-linking of multilayered chitosan (CHI)-alginate (ALG) films led to freestanding membranes with multiple interesting properties, such as: improved mechanical strength, calcium-induced adhesion and shape memory ability. The use of CaCl2 also offered the possibility of reversibly switching all of these properties by simple immersion in a chelate solution. We attribute the switch-ability of the mechanical properties, shape memory ability and the propensity for induced-adhesion to the ionic cross-linking of the multilayers. These findings suggested the potential of the developed polysaccharide freestanding membranes in a plethora of research fields, including in biomedical and biotechnological fields.

Biomimetic polysaccharide/bioactive glass nanoparticles multilayer membranes for guided tissue regeneration

Freestanding multilayered membranes, produced with chitosan, hyaluronic acid and bioactive glass nanoparticles, were shown to behave differently based on composition.

pH Responsiveness of Multilayered Films and Membranes Made of Polysaccharides

We investigated the pH-dependent properties of multilayered films made of chitosan (CHI) and alginate (ALG) and focused on their postassembly response to different pH environments using a quartz crystal microbalance with dissipation monitoring (QCM-D), swelling studies, ζ potential measurements, and dynamic mechanical analysis (DMA). In an acidic environment, the multilayers presented lower dissipation values and, consequently, higher moduli when compared with the values obtained for the pH used during the assembly (5.5). When the multilayers were exposed to alkaline environments, the opposite behavior occurred. These results were further corroborated by the ability of this multilayered system to exhibit a reversible swelling-deswelling behavior within the pH range from 3 to 9. The changes in the physicochemical properties of the multilayer system were gradual and different from those of individual solubilized polyelectrolytes. This behavior is related to electrostatic interactions between the ionizable groups combined with hydrogen bonding and hydrophobic interactions. Beyond the pH range of 3-9, the multilayers were stabilized by genipin cross-linking. The multilayered films also became more rigid while the pH responsiveness conferred by the ionizable moieties of the polyelectrolytes was preserved. This work demonstrates the versatility and feasibility of LbL methodology to generate inherently pH stimulus-responsive nanostructured films. Surface functionalization using pH responsiveness endows several biomedical applications with abilities such as drug delivery, diagnostics, microfluidics, biosensing, and biomimetic implantable membranes.

Flipped polyelectrolyte multilayer films: accessing the buried interface

Little is known concerning the interface between a polyelectrolyte multilayer, PEMU, and its substrate. Recent models suggest that excess polymer charge, compensated by counterions, remains buried within the PEMU, especially for thicker films having a nonlinear component to their growth. We report a novel approach for making free-standing multilayers of poly(diallyldimethylammonium) (PDADMA) and poly(styrenesulfonate) (PSS): after assembly on aluminum substrates, films were released by brief immersion in aqueous alkali. The multilayers were then flipped, allowing access to the initially buried substrate/PEMU interface. Experiments were performed to show that this method of release, one of many established for PEMUs, perturbed the surface and bulk of the film minimally. Film/solution and film/substrate interfaces were compared using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM was used to record topography and perform nanoindentation, while XPS provided surface elemental composition. All three methods revealed data consistent with an excess of PDADMA at the buried interface. This excess PDADMA was then complexed with additional PSS to yield "nanosandwiches" of nonstoichiometric PEMU between layers of stoichiometric PEMU.

Reversible swelling-shrinking behavior of hydrogen-bonded free-standing thin film stabilized by catechol reaction

Dopamine-modified poly(acrylic acid) (PAA-dopa) and poly(vinylpyrrolidone) (PVPON) was layer-by-layer (LbL) assembled to prepare thin film based on hydrogen bonding. The carboxylic group of acrylic acid and the phenolic hydroxyl group of dopamine can both act as hydrogen bond donors. The critical assembly and the critical disintegration pH values of PVPON/PAA-dopa film are enhanced compared with PVPON/PAA film. The hydrogen-bonded PVPON/PAA-dopa thin film can be cross-linked via catechol chemistry of dopamine. After cross-linking, the film can be exfoliated from the substrate in alkaline solution to get a free-standing film. Moreover, by tuning the pH value, deprotonation and protonation of PAA will make the hydrogen bond in the film break and reconstruct, which induces that the free-standing film has a reversible swelling-shrinking behavior.

Spatio-Temporal Control of LbL Films for Biomedical Applications: From 2D to 3D

Introduced in the '90s by Prof. Moehwald, Lvov, and Decher, the layer-by-layer (LbL) assembly of polyelectrolytes has become a popular technique to engineer various types of objects such as films, capsules and free standing membranes, with an unprecedented control at the nanometer and micrometer scales. The LbL technique allows to engineer biofunctional surface coatings, which may be dedicated to biomedical applications in vivo but also to fundamental studies and diagnosis in vitro. Initially mostly developed as 2D coatings and hollow capsules, the range of complex objects created by the LbL technique has greatly expanded in the past 10 years. In this Review, the aim is to highlight the recent progress in the field of LbL films for biomedical applications and to discuss the various ways to spatially and temporally control the biochemical and mechanical properties of multilayers. In particular, three major developments of LbL films are discussed: 1) the new methods and templates to engineer LbL films and control cellular processes from adhesion to differentiation, 2) the major ways to achieve temporal control by chemical, biological and physical triggers and, 3) the combinations of LbL technique, cells and scaffolds for repairing 3D tissues, including cardio-vascular devices, bone implants and neuro-prosthetic devices.

Myoconductive and osteoinductive free-standing polysaccharide membranes

Free-standing (FS) membranes have increasing applications in the biomedical field as drug delivery systems for wound healing and tissue engineering. Here, we studied the potential of free-standing membranes made by the layer-by-layer assembly of chitosan and alginate to be used as a simple biomimetic system of the periosteum. The design of a periosteum-like membrane implies the elaboration of a thick membrane suitable for both muscle and bone formation. Our aim was to produce well-defined ∼50 μm thick polysaccharide membranes that could be easily manipulated, were mechanically resistant, and would enable both myogenesis and osteogenesis in vitro and in vivo. The membranes were chemically crosslinked to improve their mechanical properties. Crosslinking chemistry was followed via Fourier transform infrared spectroscopy and the mechanical properties of the membranes were assessed using dynamic mechanical analysis. The loading and release of the potent osteoinductive growth factor bone morphogenetic protein 2 (BMP-2) inside and outside of the FS membrane was followed by fluorescence spectroscopy in a physiological buffer over 1 month. The myogenic and osteogenic potentials of the membranes in vitro were assessed using BMP-2-responsive skeletal myoblasts. Finally, their osteoinductive properties in vivo were studied in a preliminary experiment using a mouse ectopic model. Our results showed that the more crosslinked FS membranes enabled a more efficient myoblast differentiation in myotubes. In addition, we showed that a tunable amount of BMP-2 can be loaded into and subsequently released from the membranes, depending on the crosslinking degree and the initial BMP-2 concentration in solution. Only the more crosslinked membranes were found to be osteoinductive in vivo. These polysaccharide-based membranes have strong potential as a periosteum-mimetic scaffold for bone tissue regeneration.

Chitosan–alginate multilayered films with gradients of physicochemical cues

A new approach was used to create multilayered films with gradients of physicochemical properties. This approach shows promise for the development of other types of gradients, which will be useful to mimic extracellular architecture.

Tailored freestanding multilayered membranes based on chitosan and alginate

Engineering metabolically demanding tissues requires the supply of nutrients, oxygen, and removal of metabolic byproducts, as well as adequate mechanical properties. In this work, we propose the development of chitosan (CHIT)/alginate (ALG) freestanding membranes fabricated by layer-by-layer (LbL) assembly. CHIT/ALG membranes were cross-linked with genipin at a concentration of 1 mg·mL(-1) or 5 mg·mL(-1). Mass transport properties of glucose and oxygen were evaluated on the freestanding membranes. The diffusion of glucose and oxygen decreases with increasing cross-linking concentration. Mechanical properties were also evaluated in physiological-simulated conditions. Increasing cross-linking density leads to an increase of storage modulus, Young modulus, and ultimate tensile strength, but to a decrease in the maximum hydrostatic pressure. The in vitro biological performance demonstrates that cross-linked films are more favorable for cell adhesion. This work demonstrates the versatility and feasibility of LbL assembly to generate nanostructured constructs with tunable permeability, mechanical, and biological properties.

Sugar-mediated disassembly of mucin/lectin multilayers and their use as pH-Tolerant, on-demand sacrificial layers

The layer-by-layer (LbL) assembly of thin films on surfaces has proven to be an extremely useful technology for uses ranging from optics to biomedical applications. Releasing these films from the substrate to generate so-called free-standing multilayer films opens a new set of applications. Current approaches to generating such materials are limited because they can be cytotoxic, difficult to scale up, or have undesirable side reactions on the material. In this work, a new sacrificial thin film system capable of chemically triggered dissolution at physiological pH of 7.4 is described. The film was created through LbL assembly of bovine submaxillary mucin (BSM) and the lectin jacalin (JAC) for a (BSM/JAC) multilayer system, which remains stable over a wide pH range (pH 3-9) and at high ionic strength (up to 5 M NaCl). This stability allows for subsequent LbL assembly of additional films in a variety of conditions, which could be released from the substrate by incubation in the presence of a competitive inhibitor sugar, melibiose, which selectively disassembles the (BSM/JAC) section of the film. This novel multilayer system was then applied to generate free-standing, 7 μm diameter, circular ultrathin films, which can be attached to a cell surface as a "backpack". A critical thickness of about 100 nm for the (BSM/JAC) film was required to release the backpacks from the glass substrate, after incubation in melibiose solution at 37 °C for 1 h. Upon their release, backpacks were subsequently attached to murine monocytes without cytotoxicity, thereby demonstrating the compatibility of this mucin-based release system with living cells.

The promise of organotypic hepatic and gastrointestinal models

Advances in the design and assembly of in vitro organotypic liver and gastrointestinal (GI) models can accelerate our understanding of metabolism, nutrient absorption, and the effect of microbial flora. Such models can provide comprehensive information on how of environmental toxins, drugs, and pharmaceuticals interact with and within these organs. Information obtained from such models could elucidate the complicated cascades of signaling mechanisms that occur in vivo. Because experiments on large-scale animal models are expensive and resource intensive, the design of organotypic models has renewed significance. The challenges and approaches to designing liver and GI models are similar. Because these organs are in close proximity and interact continually, we have described recent design considerations to guide future tissue models.

Electrophoretic deposition of cellulose nanocrystals (CNs) and CNs/alginate nanocomposite coatings and free standing membranes

This study presents the electrophoretic deposition (EPD) of cellulose nanocrystals (CNs) and CNs-based alginate composite coatings for biomedical applications. The mechanism of anodic deposition of CNs and co-deposition of CNs/alginate composites was analyzed based on the results of zeta-potential, Fourier transform infrared spectroscopy and scanning electron microscopy (SEM) analyses. The capability of the EPD technique for manipulating the orientation of CNs and for the preparation of multilayer CNs coatings was demonstrated. The nanotopographic surface roughness and hydrophilicity of the deposited coatings were measured and discussed. Electrochemical testing demonstrated that a significant degree of corrosion protection of stainless steel could be achieved when CNs-containing coatings were present. Additionally, the one-step EPD-based processing of free-standing CNs/alginate membranes was demonstrated confirming the versatility of EPD to fabricate free-standing membrane structures compared to a layer-by-layer deposition technique. CNs and CNs/alginate nanocomposite coatings produced by EPD are potential candidates for biomedical, cell technology and drug delivery applications.

Nanostructured hollow tubes based on chitosan and alginate multilayers

The design and production of structures with nanometer-sized polymer films based on layer-by-layer (LbL) are of particular interest for tissue engineering since they allow the precise control of physical and biochemical cues of implantable devices. In this work, a method is developed for the preparation of nanostructured hollow multilayers tubes combining LbL and template leaching. The aim is to produce hollow tubes based on polyelectrolyte multilayer films with tuned physical-chemical properties and study their effects on cell behavior. The final tubular structures are characterized by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), microscopy, swelling, and mechanical tests, including dynamic mechanical analysis (DMA) in physiological simulated conditions. It is found that more robust films could be produced upon chemical cross-linking with genipin. In particular, the mechanical properties confirms the viscoelastic properties and a storage and young modulus about two times higher. The water uptake decreases from about 390% to 110% after the cross-linking. The biological performance is assessed in terms of cell adhesion, viability, and proliferation. The results obtained with the cross-linked tubes demonstrate that these are more suitable structures for cell adhesion and spreading. The results suggest the potential of these structures to boost the development of innovative tubular structures for tissue engineering approaches.

A layer-by-layer approach to natural polymer-derived bioactive coatings on magnesium alloys

The development of polyelectrolyte multilayered coatings on magnesium alloy substrates that can be used for controlled delivery of growth factors and required biomolecules from the surface of these degradable implants could have a significant impact in the field of bone tissue regeneration. The current work reports on the fabrication of multilayered coatings of alginate and poly-L-lysine on alkaline- and fluoride-pretreated AZ31 substrates using a layer-by-layer (LbL) technique under physiological conditions. Furthermore, these coatings were surface functionalized by chemical cross-linking and fibronectin immobilization, and the resultant changes in surface properties have been shown to influence the cellular activity of these multilayered films. The physicochemical characteristics of these coated substrates have been investigated using attenuated total reflectance Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Cytocompatibility studies using MC3T3-E1 osteoblasts show that the fluoride-pretreated, cross-linked and fibronectin-immobilized LbL-coated substrates are more bioactive and less cytotoxic than the hydroxide-pretreated, cross-linked and fibronectin-immobilized LbL-coated samples. The in vitro degradation results show that the multilayered coatings of these natural polysaccharide- and synthetic polyamino acid-based polyelectrolytes do not alter the degradation kinetics of the substrates; however, the pretreatment conditions have a significant impact on the overall coating degradation behavior. These preliminary results collectively show the potential use of LbL coatings on magnesium-based degradable scaffolds to improve their surface bioactivity.

Robust and flexible free-standing films for unidirectional drug delivery

Robust and flexible free-standing polymer films for unidirectional drug delivery are fabricated by sandwiching drug-containing polyelectrolyte multilayer films between poly(lactic-co-glycolic acid) (PLGA) barrier and capping layers. The drug-containing films are fabricated by layer-by-layer (LbL) assembly of chemically cross-linked poly(allylamine hydrochloride)-dextran (PAH-D) microgel and hyaluronic acid (HA), which can load negatively charged cancer-inhibiting drug, methotrexate (MTX). Because the PLGA barrier layer effectively blocks MTX release, MTX can be predominantly released from the PLGA capping layer of the free-standing film. This increases the efficacy of released MTX to cancer cells while minimizing its side effects on the normal tissues. We believe that the unidirectional drug delivery free-standing films can open a new avenue to design of highly efficient drug delivery systems for biomedical application.