Enhancing protein capacity of rigid macroporous polymeric adsorbent

Approaches to high-performance preparative chromatography of proteins

Preparative liquid chromatography is widely used for the purification of chemical and biological substances. Different from high-performance liquid chromatography for the analysis of many different components at minimized sample loading, high-performance preparative chromatography is of much larger scale and should be of high resolution and high capacity at high operation speed and low to moderate pressure drop. There are various approaches to this end. For biochemical engineers, the traditional way is to model and optimize a purification process to make it exert its maximum capability. For high-performance separations, however, we need to improve chromatographic technology itself. We herein discuss four approaches in this review, mainly based on the recent studies in our group. The first is the development of high-performance matrices, because packing material is the central component of chromatography. Progress in the fabrication of superporous materials in both beaded and monolithic forms are reviewed. The second topic is the discovery and design of affinity ligands for proteins. In most chromatographic methods, proteins are separated based on their interactions with the ligands attached to the surface of porous media. A target-specific ligand can offer selective purification of desired proteins. Third, electrochromatography is discussed. An electric field applied to a chromatographic column can induce additional separation mechanisms besides chromatography, and result in electrokinetic transport of protein molecules and/or the fluid inside pores, thus leading to high-performance separations. Finally, expanded-bed adsorption is described for process integration to reduce separation steps and process time.

Efficient removal of aromatic sulfonates from wastewater by a recyclable polymer: 2-naphthalene sulfonate as a representative pollutant

As a family of hydrophobic ionizable organic compounds, aromatic sulfonates can be present at high levels in industrial wastewaters. They tend to exist as anions over a wide range of pH and cannot be effectively trapped by conventional adsorbents. In the current study, a recyclable acrylic ester polymer (NDA-801) was synthesized for effective removal of aromatic sulfonates from wastewater of high acidity (e.g., pH < 1) and inorganic salts (e.g., approximately 5-10% Na2SO4 in mass), for which sodium 2-naphthalene sulfonate (2-NS) was chosen as a representative target contaminant 2-NS uptake onto NDA-801 increased with the increasing acidity of the solution. The zeta potential of NDA-801 measured at different pH levels as well as batch 2-NS adsorption from methanol/water binary systems demonstrated the favorable roles of electrostatic and hydrophobic interaction in 2-NS adsorption. As compared to a granular activated carbon GAC-1, NDA-801 exhibited much higher removal efficiency and capacity of 2-NS in fixed-bed adsorption. Moreover, the exhausted NDA-801 beads by 2-NS can be completely regenerated by water wash for repeated use, which is more economically desirable than by other regenerants, such as NaOH solution. Continuous column adsorption-regeneration cycles indicated negligible capacity loss of NDA-801 during operation and further validated its feasibility for potential application in associated wastewater treatment.

Influence of the morphology of poly(EGDMA-co-HEMA) on the chemical modifications and retention of O-phosphothreonine

The influence of the morphology of ethylene glycol dimethacrylate-hydroxyethyl methacrylate copolymer [poly(EGDMA-co-HEMA)] base support to obtain different Fe(3+)-containing sorbents and their properties in retention of O-phosphothreonine [Thre(P)] is examined in this paper. Three base supports poly(EGDMA-co-HEMA) (I-III) were obtained using different quantities of initiator in suspension polymerization reactions. These products were submitted to chemical modifications using 1,4-butanediol diglycidyl ether (BDGE) in activation reactions and different chelating agents (iminodiacetic acid, IDA; disodium ethylenediamine tetraacetate, EDTA; and hexamethylenediamine tetrapropanoic acid, HMDTP) in coupling reactions to attain Fe(3+)-containing sorbents. Properties such as specific surface area (S(s)), specific pore volume (V(p)), scanning electron microscopy (SEM), IR spectroscopy, quantity of functional groups (oxirane and carboxyl), amount of chelated metal ion, ligand occupation (L), swelling studies as well as quantity of O-phosphoamino acid retained were used as comparative parameters for matrices. In general, the derivatization reactions proved to be more efficient when higher S(s) of macropores (50-400,000 nm) were available in the matrix. In our case, it was observed when highest percentage of initiator was used. On the other hand, the effect of accessibility of surface area on the yield of coupling reactions was noticed when comparing the different chelating agents since the number of carboxyl groups present in products was higher when the molecular size of the chelating agent was lower. Although all Fe(3+)-containing sorbents resulted efficient to retain Thre(P), the values of retention of the amino acid were slightly higher when IDA-containing matrices were used irrespective of the quantity of metal chelated. This could be probably due to the fact that the IDA ligand could be bounded to the matrix in sites that though accessible for the center of adsorption were hard for Thre(P) to access.

Fabrication and characterization of a rigid magnetic matrix for protein adsorption

This article describes the fabrication and characterization of a novel magnetic poly(glycidyl methacrylate-triallyl isocyanurate-divinylbenzene) matrix containing magnetite colloids. The results showed that the matrix was superparamagnetic and could be separated magnetically from a suspension in a few seconds. Protein adsorption properties of diethylamine-derivatized matrix were characterized with bovine serum albumin (BSA) as a model protein. The static capacity determined by batch adsorption was 79 mg/ml wet matrix. Kinetic study gave an effective diffusivity of BSA of 5.0 x 10(-13) m2/s in the matrix at an initial BSA concentration in the liquid phase of 1.0 mg/ml. Stability of the matrix was confirmed by recycling of the matrix in protein adsorptions.