Porous inorganic membranes for CO2 capture: present and prospects

Crosslinked hydrogel-derived carbons activated by trace amounts of aqueous potassium carbonate for carbon dioxide adsorption

A new method for green synthesis of activated carbon using chitosan-based hydrogel precursors is reported. Chitosan-based hydrogel materials are designed to absorb trace amounts of non-toxic and non-corrosive activating agent K2CO3 from dilute aqueous solution. The K2CO3 impregnated hydrogels are further freeze-dried and converted to activated carbons with tuneable pore structure by a single-step pyrolysis. Activated carbon with highest pore volume of 0.76 cm3/g and surface area of 2026 m2/g is obtained by using K2CO3 as low as 0.23 g per gram of chitosan hydrogel. It can adsorb maximum CO2 of 4.2 mmol/g at 25 °C and 1 bar. This study demonstrates that biopolymer hydrogels impregnated with trace amounts of K2CO3 are excellent precursor materials to design high surface area carbons for CO2 capture.

Zeolites synthesis from phyllosilicates and their performance for CO2 adsorption

Five phyllosilicates (kaolinite, montmorillonite, saponite, sepiolite and palygorskite) have been selected as starting materials for the synthesis of zeolites. Among them, kaolinite and montmorillonite display the lowest Si/Al molar ratio leading to aluminosilicates with high crystallinity. Thus, the hydrothermal treatment under basic conditions forms 4A zeolite when kaolinite is used as starting material while 13X zeolite is obtained when montmorillonite is used as starting material. The microporosity and CO2-adsorption capacity of the prepared zeolites are directly related to its crystallinity. Thus, in order to improve it, raw phyllosilicates were subjected to a microwave-assisted treatment to remove undesired Mg or Fe-species, which have a negative effect in the assembling of the zeolites by hydrothermal basic conditions in a second step. The highest adsorption value was 3.85 mmol/g at 25 °C and 760 mm of Hg for Mont-A-B sample after the consecutive treatments.

Hydrogen-bonded organic frameworks for membrane separation

Hydrogen-bonded organic frameworks (HOFs) are a new class of crystalline porous materials that are formed through the interconnection of organic or metal-organic building units via intermolecular hydrogen bonds. The remarkable flexibility and reversibility of hydrogen bonds, coupled with the customizable nature of organic units, endow HOFs with mild synthesis conditions, high crystallinity, solvent processability, and facile self-healing and regeneration properties. Consequently, these features have garnered significant attention across various fields, particularly in the realm of membrane separation. Herein, we present an overview of the recent advances in HOF-based membranes, including their advanced fabrication strategies and fascinating applications in membrane separation. To attain the desired HOF-based membranes, careful consideration is dedicated to crucial factors such as pore size, stability, hydrophilicity/hydrophobicity, and surface charge of the HOFs. Additionally, diverse preparation methods for HOF-based membranes, including blending, in situ growth, solution-processing, and electrophoretic deposition, have been analyzed. Furthermore, applications of HOF-based membranes in gas separation, water treatment, fuel cells, and other emerging application areas are presented. Finally, the challenges and prospects of HOF-based membranes are critically pointed out.

Unveiling CO2 capture in tailorable green neoteric solvents: An ensemble learning approach informed by quantum chemistry

In the relentless battle against the impending climate crisis, deep eutectic solvents (DESs) have emerged as beacons of hope in the realm of green chemistry, igniting a resurgence of scientific exploration. These versatile compounds hold the promise of revolutionizing carbon capture, effectively countering the rising tide of carbon dioxide (CO2) emissions responsible for global warming and climate instability. Their adaptability offers a tantalizing prospect, as they can be finely tailored for a multitude of applications, thereby encompassing the uncharted territory of potential DESs. Navigating this unexplored terrain underscores the vital need for predictive computational methods, which serve as our guiding compass in the expansive landscape of DESs. Thermodynamic modeling and solubility prognostications stand as our unwavering navigational aides on this treacherous odyssey. In this direction, the COSMO-RS model intertwined with the captivating Stochastic Gradient Boosting (SGB) algorithm. Together, they unveil the elusive truths pertaining to CO2 solubility in DESs, forging a path toward a sustainable future. Our quest is substantiated by two exhaustive datasets, a repository of knowledge encompassing 1973 and 2327 CO2 solubility data points spanning 132 and 150 distinct DESs respectively, encapsulating a spectrum of conditions. The SGB models, incorporating features derived from COSMO-RS, as well as accounting for pressure and temperature variables, furnishes predictions that harmonize seamlessly with experimental CO2 solubility values, boasting an impressive Average Absolute Relative Deviation (AARD) of a mere 0.85% and 2.30% respectively. When juxtaposed with literature-reported methodologies like different EoS, as well as Computational Solvation, and machine learning (ML) models, our SGB model emerges as the epitome of reliability, offering robust forecasts of CO2 solubility in DESs. It emerges as a potent tool for the design and selection of DESs for CO2 capture and utilization, heralding a sustainable and environmentally conscientious future in the battle against climate change.

Energy Application of Graphene Based Membrane: Hydrogen Separation

Hydrogen gas (H2 ) is a viable energy carrier that has the potential to replace the traditional fossil fuels and contribute to achieving zero net emissions, making it an attractive option for a hydrogen-based society. However, current H2 purification technologies are often limited by high energy consumption, and as a result, there is a growing demand for alternative techniques that offer higher H2 purity and energy efficiency. Membrane separation has emerged as a promising approach for obtaining high-purity H2 gas with low energy consumption. Nevertheless, despite years of development, commercial polymeric membranes have limited performance, prompting researchers to explore alternative materials. In this context, carbon-based membranes, specifically graphene-based nanomaterials, have gained significant attention as potential membrane materials due to their unique properties. In this review, we provide a comprehensive overview of carbon-based membranes for H2 gas separation, fabrication of the membrane, and its characterization, including their advantages and limitations. We also explore the current technological challenges and suggest insights into future research directions, highlighting potential ways to improve graphene-based membranes performance for H2 separations.

Hydroxy-Rich Covalent Organic Framework for the Efficient Catalysis of the Cycloaddition of CO2

The cycloaddition of CO2 with epoxides to cyclic carbonates is one of the most promising and green pathways for CO2 utilization, and the development of highly efficient catalysts remains a challenge. In this work, a novel hydroxy-rich covalent organic framework (TFPB-DHBD-COF) was synthesized, and it served as an efficient heterogeneous catalyst for the reaction of CO2 with 1,2-epoxybutane under mild conditions, providing the desired products in 90% conversion. The abundant hydroxy groups in the pore channels of TFPB-DHBD-COF could not only activate epoxides and CO2 via hydrogen bonding but also obviously enhance its stability through intramolecular five-membered ring hydrogen bonding. Thus, this COF also exhibited outstanding stability and tolerance for diverse substrates. Undoubtedly, this work has enriched the application of tailored COFs in the activation and utilization of CO2.

Valorization of wipe wastes for the synthesis of microporous carbons and their application in CO2 capture, gas separation and H2-storage

Wipe wastes have been used as a cellulosic source to synthesize biochars. Prior to the synthesis of the adsorbents by the pyrolysis of wipes wastes, this waste was treated to remove the pathogenic agents. Then, the wipe wastes were pyrolyzed between 500 and 900 °C to obtain biochars, whose microporosity increased proportionally to the pyrolysis temperature, achieving a maximum CO2-adsorption uptake of 2.53 mmol/g at a pressure of 760 mm of Hg and 25 °C for the biochar pyrolized at 900 °C. The synthesized biochars are also highly selective towards CO2-adsorption in CO2/N2 or CO2/H2 mixtures. Hence, these adsorbents have shown a great potential to be used in flue gas treatment and H2-purification processes. Biochar treatment with KOH further improves microporosity due to chemical activation although the addition of a large amount of KOH leads to excessive microporosity causing a collapse in the pore structure and decreasing CO2-adsorption capacity.

Microwave-Assisted Synthesis of Zeolite A from Metakaolinite for CO2 Adsorption

The global demand for energy and industrial growth has generated an exponential use of fossil fuels in recent years. It is well known that carbon dioxide (CO2) is mainly produced, but not only from fuels, which has a negative impact on the environment, such as the increasing emission of greenhouse gases. Thus, thinking about reducing this problem, this study analyzes microwave irradiation as an alternative to conventional heating to optimize zeolite A synthesis conditions for CO2 capture. Synthesis reaction parameters such as different temperatures (60-150 °C) and different time durations (1-6 h) were evaluated. The CO2 adsorption capacity was evaluated by CO2 adsorption-desorption isotherms at 25 °C and atmospheric pressure. The results showed that the synthesis of zeolite A by microwave irradiation was successfully obtained from natural kaolinite (via metakaolinization), reducing both temperature and time. Adsorption isotherms show that the most promising adsorbent for CO2 capture is a zeolite synthesized at 100 °C for 4 h, which reached an adsorption capacity of 2.2 mmol/g.

Balancing the Crystallinity and Film Formation of Metal-Organic Framework Membranes through In Situ Modulation for Efficient Gas Separation

Polycrystalline metal-organic framework (MOF) layers hold great promise as molecular sieve membranes for efficient gas separation. Nevertheless, the high crystallinity tends to cause inter-crystalline defects/cracks in the nearby crystals, which makes crystalline porous materials face a great challenge in the fabrication of defect-free membranes. Herein, for the first time, we demonstrate the balance between crystallinity and film formation of MOF membrane through a facile in situ modulation strategy. Monocarboxylic acid was introduced as a modulator to regulate the crystallinity via competitive complexation and thus concomitantly control the film-forming state during membrane growth. Through adjusting the ratio of modulator acid/linker acid, an appropriate balance between this structural "trade-off" was achieved. The resulting MOF membrane with moderate crystallinity and coherent morphology exhibits molecular sieving for H2 /CO2 separation with selectivity up to 82.5.

Fluorescent and Catalytic Properties of a 2D Lamellar Zn Metal-Organic Framework with sql Network Structure

A two-dimensional (2D) lamellar Zn metal-organic framework (Zn-MOF, 1) with a fluorescent 1,6-di(pyridin-3-yl)pyrene (3-DPPy) and 1,4-benzenedicarboxylate (BDC2-) bridging linkers was prepared and structurally characterized. The chemical formula of 1 is [Zn(μ-3-DPPy)(μ-BDC)]n. The mononuclear Zn(II) ion, acting as a node, is tetrahedrally coordinated with two 3-DPPy and two BDC linkers. The coordination environment of Zn(II) is a distorted tetrahedral geometry. The Zn-MOF is the sql network structure based on topology analysis. The undulated 2D sheets of 1 tightly pack together to form a lamellar structure. The pyrene moieties are parallelly oriented to each other. The Zn-MOF is not porous, possibly because the mononuclear Zn(II) node did not form cluster-based secondary building units due to the less symmetric 3-DPPy. The steady-state fluorescence measurements indicate that the fluorescence signal of the 1 is slightly blue-shifted compared to the free 3-DPPy in the solid state. The excimer emission band at 463 nm for crystalline 3-DPPy is shifted to 447 nm for 1. The value of 447 nm is also a blue-shift value compared to nonsubstituted pyrene crystals (470 nm). Despite its nonporosity, the surface Lewis acidic sites of 1 could catalyze the transesterification of esters. Surface defect sites are responsible for this catalytic activity.

Zeolites and metal-organic frameworks for gas separation: the possibility of translating adsorbents into membranes

Zeolites and metal-organic frameworks (MOFs) represent an attractive class of crystalline porous materials that possesses regular pore structures. The inherent porosity of these materials has led to an increasing focus on gas separation applications, encompassing adsorption and membrane separation techniques. Here, a brief overview of the critical properties and fabrication approaches for zeolites and MOFs as adsorbents and membranes is given. The separation mechanisms, based on pore sizes and the chemical properties of nanochannels, are explored in depth, considering the distinct characteristics of adsorption and membrane separation. Recommendations for judicious selection and design of zeolites and MOFs for gas separation purposes are emphasized. By examining the similarities and differences between the roles of nanoporous materials as adsorbents and membranes, the feasibility of zeolites and MOFs from adsorption separation to membrane separation is discussed. With the rapid development of zeolites and MOFs towards adsorption and membrane separation, challenges and perspectives of this cutting-edge area are also addressed.

Two bimetal-doped (Fe/Co, Mn) polyoxometalate-based hybrid compounds for visible-light-driven CO2 reduction

Two polyoxometalate (POM)-based hybrid compounds have been successfully designed and constructed by the hydrothermal method with molecular formulas [K(H₂O)₂FeII0.33Co_0.67(H₂O)₂(DAPSC)]₂{[FeII0.33Co_0.67(H₂O)(DAPSC)]₂[FeII0.33Co_0.67(H₂O)₄]₂[Na₂FeIII4P₄W₃₂O₁₂₀]}·21.5H₂O (1), and [Na(H₂O)₂FeII0.33Mn_0.67(H₂O)₂(DAPSC)]₂{[FeII0.33Mn_0.67(H₂O)(DAPSC)]₂[FeII0.33Mn_0.67(H₂O)₄]₂[Na₂FeIII4P₄W₃₂O₁₂₀(H₂O)₂]}·24H₂O (2) (DAPSC = 2,6-diacetylpyridine bis-(semicarbazone)), respectively. Structural analysis revealed that 1 and 2 consisted of metal-organic complexes containing DAPSC ligands with dumbbell-type inorganic clusters, iron-cobalt (iron-manganese) and some other ions. By utilizing a combination of strongly reducing {P₂W₁₂} units and bimetal-doped centres the CO₂ photoreduction catalytic capacity of 1 and 2 was improved. Notably, the photocatalytic performance of 1 was much better than that of 2. In CO₂ photoreduction, 1 exhibited CO selectivity as high as 90.8%. Furthermore, for 1, the CO generation rate reached 6885.1 μmol g^-1 h^-1 at 8 h with 3 mg, and its better photocatalytic performance was presumably due to the introduction of cobalt and iron elements to give 1 a more appropriate energy band structure. Further recycling experiments indicated that 1 was a highly efficient CO₂ photoreduction catalyst, which could still possess catalytic activity after several cycles.

High-Throughput Screening of the CoRE-MOF-2019 Database for CO2 Capture from Wet Flue Gas: A Multi-Scale Modeling Strategy

Stabilizing the escalating CO₂ levels in the atmosphere is a grand challenge in view of the increasing global demand for energy, the majority of which currently comes from the burning of fossil fuels. Capturing CO₂ from point source emissions using solid adsorbents may play a part in meeting this challenge, and metal-organic frameworks (MOFs) are considered to be a promising class of materials for this purpose. It is important to consider the co-adsorption of water when designing materials for CO₂ capture from post-combustion flue gases. Computational high-throughput screening (HTS) is a powerful tool to identify top-performing candidates for a particular application from a large material database. Using a multi-scale modeling strategy that includes a machine learning model, density functional theory (DFT) calculations, force field (FF) optimization, and grand canonical Monte Carlo (GCMC) simulations, we carried out a systematic computational HTS of the all-solvent-removed version of the computation-ready experimental metal-organic framework (CoRE-MOF-2019) database for selective adsorption of CO₂ from a wet flue gas mixture. After initial screening based on the pore diameters, a total of 3703 unique MOFs from the database were considered for screening based on the FF interaction energies of CO₂, N₂, and H₂O molecules with the MOFs. MOFs showing stronger interactions with CO₂ compared to that with H₂O and N₂ were considered for the next level of screening based on the interaction energies calculated from DFT. CO₂-selective MOFs from DFT screening were further screened using two-component (CO₂ and N₂) and finally three-component (CO₂, N₂, and H₂O) GCMC simulations to predict the CO₂ capacity and CO₂/N₂ selectivity. Our screening study identified MOFs that show selective CO₂ adsorption under wet flue gas conditions with significant CO₂ uptake capacity and CO₂/N₂ selectivity in the presence of water vapor. We also analyzed the nature of pore confinements responsible for the observed CO₂ selectivity.

In Situ Synthesis of Cation-Free Zirconia-Supported Zeolite CHA Membranes for Efficient CO2/CH4 Separation

Cation-free zirconosilicate zeolite CHA and thin zirconia-supported membranes were in situ synthesized in a fluoride-free gel for the first time. The usage of the ZrO₂/Al₂O₃ composite support inhibited the transportation of aluminum from the support into zeolite membranes. No fluorite source was used for the synthesis of cation-free zeolite CHA membranes, indicating the green property of the synthesis. The thickness of the membrane was only 1.0 μm. The best cation-free zeolite CHA membrane prepared by the green in situ synthesis displayed a high CO₂ permeance of 1.1 × 10^-6 mol/(m² s Pa) and CO₂/CH₄ selectivity of 79 at 298 K and 0.2 MPa pressure drop for an equimolar CO₂/CH₄ mixture.

Covalent Organic Frameworks: The Rising-Star Platforms for the Design of CO2 Separation Membranes

Membrane-based carbon dioxide (CO₂ ) capture and separation technologies have aroused great interest in industry and academia due to their great potential to combat current global warming, reduce energy consumption in chemical separation of raw materials, and achieve carbon neutrality. The emerging covalent organic frameworks (COFs) composed of organic linkers via reversible covalent bonds are a class of porous crystalline polymers with regular and extended structures. The inherent structure and customizable organic linkers give COFs high and permanent porosity, short transport channel, tunable functionality, and excellent stability, thereby enabling them rising-star alternatives for developing advanced CO₂ separation membranes. Therefore, the promising research areas ranging from development of COF membranes to their separation applications have emerged. Herein, this review first introduces the main advantages of COFs as the state-of-the-art membranes in CO₂ separation, including tunable pore size, modifiable surfaces property, adjustable surface charge, excellent stability. Then, the preparation approaches of COF-based membranes are systematically summarized, including in situ growth, layer-by-layer stacking, blending, and interface engineering. Subsequently, the key advances of COF-based membranes in separating various CO₂ mixed gases, such as CO₂ /CH₄ , CO₂ /H₂ , CO₂ /N₂ , and CO₂ /He, are comprehensively discussed. Finally, the current issues and further research expectations in this field are proposed.

Design and Validation of an Experimental Setup for Evaluation of Gas Permeation in Ceramic Membranes

An experimental setup for the evaluation of permeation of gaseous species with the possibility of simultaneously collecting electrochemical impedance spectroscopy data in disk-shaped ceramic membranes was designed and assembled. It consists of an alumina sample holder with thermocouple tips and platinum electrodes located close to both sides of the sample. Water-cooled inlet and outlet gas connections allowed for the insertion of the sample chamber into a programmable split tubular furnace. Gas permeation through a ceramic membrane can be monitored with mass flow controllers, a mass spectrometer, and an electrochemical impedance analyzer. For testing and data validation, ceramic composite membranes were prepared with the infiltration of molten eutectic compositions of alkali salts (lithium, sodium, and potassium carbonates) into porous gadolinia-doped ceria. Values of the alkali salt melting points and the permeation rates of carbon dioxide, in agreement with reported data, were successfully collected.

Solvent-Free Coupling Reaction of Carbon Dioxide and Epoxides Catalyzed by Quaternary Ammonium Functionalized Schiff Base Metal Complexes under Mild Conditions

A series of bifunctional Schiff base metal catalysts (Zn-NPClR, Zn-NPXH, and M-NPClH) with two quaternary ammonium groups were prepared for carbon dioxide (CO₂) and epoxide coupling reactions. The effects of the reaction variables on the catalytic activity were systematically investigated, and the optimal reaction conditions (120 °C, 1 MPa CO₂, 3 h) were screened. The performances of different metal-centered catalysts were evaluated, and Co-NPClH showed excellent activity. This kind of bifunctional catalyst has a wide range of substrate applicability, excellent stability, and can be reused for more than five runs. A relatively high TOF could reach up to 1416 h^-1 with Zn-NPClH as catalyst by adjusting reaction factors. In addition, the kinetic study of the coupling reaction catalyzed by three catalysts (Zn, Co, and Ni) was carried out to obtain the activation energy (E_a) for the formation of cyclic carbonates. Finally, a possible mechanism for this cyclization reaction was proposed.

Research status, challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve carbon peaking and carbon neutrality. Among them, the catalytic conversion of carbon dioxide to generate renewable fuels has received great attention. As one of these methods, photocatalysis has its unique properties and mechanism, which can only rely on sunlight without inputting other energy. It is an emerging discipline with great development prospects. The core of photocatalysis lies in the development of photocatalysts with high activity, high selectivity, low cost, and high durability. This review first introduces the background and mechanism of photocatalysis, then introduces various types of photocatalysts based on different substrates, and analyzes the methods and mechanisms to improve the activity and selectivity of photocatalysts. Finally, combining the plasmon effect with photocatalysis, the review analyzes the promoting effect of the plasmon effect on the photocatalytic carbon dioxide synthesis of renewable fuels, which provides a new idea for it.

Experimental and theoretical study on the regioselective bis- or polyalkylation of 6-amino-2-mercapto-3H-pyrimidin-4-one using zeolite nano-gold catalyst and a quantum hybrid computational method

The synthetic utility of 6-amino-2-mercapto-3H-pyrimidin-4-one 3 as building blocks for new poly (pyrimidine) by alkylation using the bis(halo) compounds and zeolite nano-gold as a catalyst was investigated. Furthermore, the experimental findings by the theoretical Density functional theory (DFT) computations at the DFT/B3LYP level of theory, utilizing the 6-311++G (d,p) basis set in the gas phase, were used to investigate the distinct phases for Regio isomer 11a & 12a and 11b & 12b compounds was fair and of good quality. The stability of the 12a and 12b phases is higher than the other Regio isomer 11a and 11b phases, according to DFT modelling. By computing HOMO and LUMO pictures, the electronic parameters: dipole moment of these compounds in the ground state were theoretically investigated. Non-linear optical (NLO) characteristics and quantum chemical parameters were examined using frontier molecular orbital (FMO) analysis. Natural bond orbital analysis was used to characterize the charge transfer of the electron density in the investigated compounds (NBO). The molecular electrostatic potential surfaces (MEPS) plots have been generated, and absorption spectral analysis in different solvents has been theoretically and experimentally examined to better understand the reactivity spots. At the B3LYP/6-311G (d,p) level of theory, thermodynamic properties were also calculated. Finally, DFT calculations were used to connect the structure-activity relationship (SAR) with real antibacterial results for compounds 12a and 12b.

Development of highly permselective Mixed Matrix Membranes comprising of polyimide and Ln-MOF for CO2 capture

Mixed Matrix Membranes (MMMs) with hybrid organic-inorganic characteristics offer a strong alternative to traditional polymer-based membranes to reduce the trade-off between gas permeability and selectivity. This work incorporated lanthanum-Metal Organic Frameworks in the Matrimid to fabricate MMMs. To understand the effects of nano-filler on membranes' morphology, porosity, thermal stability, and chemical composition, MMMs were fabricated with three different loadings of nano-filler, i.e., 10, 20 and 30 wt%. The selectivity and permeability of CH₄, CO₂, and N₂ gases through MMMs were investigated at 10 bar pressure and temperatures ranging from 25 to 55 °C. All MMMs exhibited enhanced CO₂ permeation with increased nano-filler loading because the porous nano-filler provided additional channels and fractional free volume in the polymer matrix. The 30 wt% loaded membrane showed a 183% increase in permeability of CO₂ than neat membrane. With increasing nano-filler loading, the selectivity of MMMs increased from 34.1 to 48.45 for CO₂/N₂ and from 36.2 to 54.67 for CO₂/CH₄, confirming the absence of membrane defects, improved filler/polymer interface, and excellent dispersion of nano-filler in the polymer matrix. The results proved that these membranes could be further used for gas separation industrial applications.

Recent advances in high-crystalline conjugated organic polymeric materials for photocatalytic CO2 conversion

The photocatalytic conversion of carbon dioxide (CO₂) to high-value-added fuels is a meaningful strategy to achieve carbon neutrality and alleviate the energy crisis. However, the low efficiency, poor selectivity, and insufficient product variety greatly limit its practical applications. In this regard, conjugated organic polymeric materials including carbon nitride (g-C₃N₄), covalent organic frameworks (COFs), and covalent triazine frameworks (CTFs) exhibit enormous potential owing to their structural diversity and functional tunability. Nevertheless, their catalytic activities are largely suppressed by the traditional amorphous or weakly crystalline structures. Therefore, constructing relevant high-crystalline materials to ameliorate their inherent drawbacks is an efficient strategy to enhance the photocatalytic performance of conjugated organic polymeric materials. In this review, the advantages of high-crystalline organic polymeric materials including reducing the concentration of defects, enhancing the built-in electric field, reducing the interlayer hydrogen bonding, and crystal plane regulation are highlighted. Furthermore, the strategies for their synthesis such as molten-salt, solid salt template, and microwave-assisted methods are comprehensively summarized, while the modification strategies including defect engineering, element doping, surface loading, and heterojunction construction are elaborated for enhancing their photocatalytic activities. Ultimately, the challenges and opportunities of high-crystalline conjugated organic polymeric materials in photocatalytic CO₂ conversion are prospected to give some inspiration and guidance for researchers.

Deep Eutectic Liquids as Tailorable Extraction Solvents: A Review of Opportunities and Challenges

Deep Eutectic Liquids (DELs) fall among the rapidly evolving discoveries of the 21st century, and these liquids are considered as alternative solvents to toxic and volatile organic liquids. Nevertheless, the emerging trend regarding the use of DELs in every field of physical and biological sciences, a lot of ambiguities and misconceptions exist about their formation, mechanism, and efficiencies observed or projected. A review of available technical data makes it obvious that these liquids have the potential to revolutionize the underdeveloped areas of analytical chemistry particularly the extraction/enrichment of analytes. To ensure the green and sustainable use of DELs, the researchers need to have a thorough understanding of DELs, their classification, chemistry, the nature and strength of molecular entanglements, and their tailorable features. Many researchers have declared these liquids recyclable but more attentive trials are needed to develop an authentic and straightforward DELs recycling methodology. The present review covers sound background knowledge and expert opinions about the technical definition of DELs, their classification, formation, recyclability, and tailorable features for their application as extraction solvent/sorbent in analytical chemistry.

Effect of Porosity and Surface Chemistry on CO2 and CH4 Adsorption in S-Doped and S-/O-co-Doped Porous Carbons

The aim of this study was to determine the adsorption performance of a petroleum pitch-based activated carbon (PPAC1:3) before and after a post-treatment with H2S. In the first step, a microporous activated carbon (PPAC1:3) with a highly developed porous structure was produced through a chemical activation route with KOH. Afterward, the synthesized activated carbon was thermally treated yielding two different series of functionalized activated carbons: (i) a series of carbons were treated directly with H2S at elevated temperatures (600 °C and 800 °C), and (ii) a series of carbons were generated by combining an oxidation treatment with plasma followed by H2S treatment at elevated temperatures (600 °C and 800 °C). The chemical and structural characteristics of the S-doped and S-/O-co-doped porous carbons were investigated by means of different experimental techniques, such as XRD, RAMAN, FESEM, XPS, TPD, N2, and CO2 adsorption, and finally tested in CO2 and CH4 adsorption at atmospheric and high pressure. The functionalized porous carbons possessed specific surface areas of 2420–2690 m2/g, total pore volume of 1.05–1.18 cm3/g, and sulfur content up to 2.55 atom % (the sulfur content of the original carbon was 0.19%). After a careful analysis of the carbon dioxide and methane uptake at atmospheric (0.1 MPa) and high pressure (4 MPa), adsorption results confirm that the microporous structure is the main structural parameter defining the adsorption performance and, to a lower extent, the surface chemistry. Overall, a significant improvement in the total uptake can be appreciated after the H2S treatment.

Emerging Trends in Sustainable CO2 -Management Materials

With the rising level of atmospheric CO₂ worsening climate change, a promising global movement toward carbon neutrality is forming. Sustainable CO₂ management based on carbon capture and utilization (CCU) has garnered considerable interest due to its critical role in resolving emission-control and energy-supply challenges. Here, a comprehensive review is presented that summarizes the state-of-the-art progress in developing promising materials for sustainable CO₂ management in terms of not only capture, catalytic conversion (thermochemistry, electrochemistry, photochemistry, and possible combinations), and direct utilization, but also emerging integrated capture and in situ conversion as well as artificial-intelligence-driven smart material study. In particular, insights that span multiple scopes of material research are offered, ranging from mechanistic comprehension of reactions, rational design and precise manipulation of key materials (e.g., carbon nanomaterials, metal-organic frameworks, covalent organic frameworks, zeolites, ionic liquids), to industrial implementation. This review concludes with a summary and new perspectives, especially from multiple aspects of society, which summarizes major difficulties and future potential for implementing advanced materials and technologies in sustainable CO₂ management. This work may serve as a guideline and road map for developing CCU material systems, benefiting both scientists and engineers working in this growing and potentially game-changing area.

Functionalization of Diamine-Appended MOF-Based Adsorbents by Ring Opening of Epoxide: Long-Term Stability and CO2 Recyclability under Humid Conditions

Although diamine-appended metal-organic framework (MOF) adsorbents exhibit excellent CO₂ adsorption performance, a continuous decrease in long-term capacity during repeated wet cycles remains a formidable challenge for practical applications. Herein, we present the fabrication of diamine-appended Mg₂(dobpdc)-alumina beads (een-MOF/Al-Si-Cx; een = N-ethylethylenediamine; x = number of carbon atoms attached to epoxide) coated with hydrophobic silanes and alkyl epoxides. The reaction of epoxides with diamines in the portal of the pore afforded sufficient hydrophobicity, hindered the penetration of water vapor into the pores, and rendered the modified diamines less volatile. een-MOF/Al-Si-C17-200 (een-MOF/Al-Si-C17-y; y = 50, 100, and 200, denoting wt % of C17 with respect to the bead, respectively), with substantial hydrophobicity, showed a significant uptake of 2.82 mmol g^-1 at 40 °C and 15% CO₂, relevant to flue gas concentration, and a reduced water adsorption. The modified beads maintained a high CO₂ capacity for over 100 temperature-swing adsorption cycles in the presence of 5% H₂O and retained CO₂ separation performance in breakthrough tests under humid conditions. This result demonstrates that the epoxide coating provides a facile and effective method for developing promising adsorbents with high CO₂ adsorption capacity and long-term durability, which is a required property for postcombustion applications.

Ultrathin Covalent Organic Framework Membranes via a Multi-Interfacial Engineering Strategy for Gas Separation

Covalent organic frameworks (COFs) are promising membrane materials due to their high porosity, ordered arrangements, and high stability. However, the relatively large pore size and complicated membrane preparation processes of COFs limit their applications in sieving small gas molecules, even at a lab scale. Herein, a multi-interfacial engineering strategy is proposed, that is, direct layer-by-layer interfacial reaction of two COFs (TpPa-SO₃ H and TpTG_Cl ) with different pore sizes to form narrowed apertures at the COF-COF interfaces atop a relatively large-pore COF (COF-LZU1) film. At 423 K, one fabricated 155 nm-thick ultrathin COF membrane displays H₂ permeance as high as 2163 gas permeation units (GPU) and a H₂ /CO₂ selectivity of 26, transcending the 2008 Robeson upper bound. This strategy not only provides high-performance membrane candidates for H₂ separation, but also enlightens the interfacial engineering and pore engineering manipulation for other COFs, porous polymers, and their membranes.

Network Structure Engineering of Organosilica Membranes for Enhanced CO2 Capture Performance

The membrane separation process for targeted CO2 capture application has attracted much attention due to the significant advantages of saving energy and reducing consumption. High-performance separation membranes are a key factor in the membrane separation system. In the present study, we conducted a detailed examination of the effect of calcination temperatures on the network structures of organosilica membranes. Bis(triethoxysilyl)acetylene (BTESA) was selected as a precursor for membrane fabrication via the sol-gel strategy. Calcination temperatures affected the silanol density and the membrane pore size, which was evidenced by the characterization of FT-IR, TG, N2 sorption, and molecular size dependent gas permeance. BTESA membrane fabricated at 500 °C showed a loose structure attributed to the decomposed acetylene bridges and featured an ultrahigh CO2 permeance around 15,531 GPU, but low CO2/N2 selectivity of 3.8. BTESA membrane calcined at 100 °C exhibited satisfactory CO2 permeance of 3434 GPU and the CO2/N2 selectivity of 22, displaying great potential for practical CO2 capture application.

The Prospects of Clay Minerals from the Baltic States for Industrial-Scale Carbon Capture: A Review

Carbon capture is among the most sustainable strategies to limit carbon dioxide emissions, which account for a large share of human impact on climate change and ecosystem destruction. This growing threat calls for novel solutions to reduce emissions on an industrial level. Carbon capture by amorphous solids is among the most reasonable options as it requires less energy when compared to other techniques and has comparatively lower development and maintenance costs. In this respect, the method of carbon dioxide adsorption by solids can be used in the long-term and on an industrial scale. Furthermore, certain sorbents are reusable, which makes their use for carbon capture economically justified and acquisition of natural resources full and sustainable. Clay minerals, which are a universally available and versatile material, are amidst such sorbents. These materials are capable of interlayer and surface adsorption of carbon dioxide. In addition, their modification allows to improve carbon dioxide adsorption capabilities even more. The aim of the review is to discuss the prospective of the most widely available clay minerals in the Baltic States for large-scale carbon dioxide emission reduction and to suggest suitable approaches for clay modification to improve carbon dioxide adsorption capacity.

Transforming Porous Silica Nanoparticles into Porous Liquids with Different Canopy Structures for CO2 Capture

Porous liquids (PLs) have both liquid fluidity and solid porosity, thereby offering a variety of applications, such as gas sorption and separation, homogeneous catalysis, energy storage, and so forth. In this research, canopies with varying structures were utilized to modify porous silica nanoparticles to develop Type I PLs. According to experimental results, the molecular weight of canopies should be high enough to maintain the porous materials in the liquid state at room temperature. Characterization results revealed that PL_1_M2070 and PL_1_AC1815 displayed low viscosity and good fluidity. Both low temperature and high pressure positively influenced CO₂ capacity. The cavity occupancy resulted in poorer sorption capacity of PLs with branched canopies in comparison with that with linear canopies. Furthermore, the sorption capacity of PL_1_M2070 was 90.5% of the original CO₂ sorption capacity after 10 sorption/desorption cycles, indicating excellent recyclability.

Carbon dioxide capture with zeotype materials

This review describes the application of zeotype materials for the capture of CO2 in different scenarios, the critical parameters defining the adsorption performances, and the challenges of zeolitic adsorbents for CO2 capture.

Achieving High-Selective CO2 Adsorption on SAPO-35 Zeolites by Template-Modulating Framework Silicon Content

Small-pore silicoaluminophosphate (SAPO) zeolites with 8-ring pore windows and appropriate acidities/polarities, for example, SAPO-34 (CHA) and SAPO-56 (AFX) have proven as potential adsorbing materials for selective adsorption of CO2. However,...