Efficient Polymerization of the Aniline Dimer p-Aminodiphenylamine (PADPA) with Trametes versicolor Laccase/O2 as Catalyst and Oxidant and AOT Vesicles as Templates

Artificial Polymerizations in Living Organisms for Biomedical Applications

Within living organisms, numerous nanomachines are constantly involved in complex polymerization processes, generating a diverse array of biomacromolecules for maintaining biological activities. Transporting artificial polymerizations from lab settings into biological contexts has expanded opportunities for understanding and managing biological events, creating novel cellular compartments, and introducing new functionalities. This review summarizes the recent advancements in artificial polymerizations, including those responding to external stimuli, internal environmental factors, and those that polymerize spontaneously. More importantly, the cutting-edge biomedical application scenarios of artificial polymerization, notably in safeguarding cells, modulating biological events, improving diagnostic performance, and facilitating therapeutic efficacy are highlighted. Finally, this review outlines the key challenges and technological obstacles that remain for polymerizations in biological organisms, as well as offers insights into potential directions for advancing their practical applications and clinical trials.

Concepts of a synthetic minimal cell: Information molecules, metabolic pathways, and vesicle reproduction

How do the living systems emerge from non-living molecular assemblies? What physical and chemical principles supported the process? To address these questions, a promising strategy is to artificially reconstruct living cells in a bottom-up way. Recently, the authors developed the "synthetic minimal cell" system showing recursive growth and division cycles, where the concepts of information molecules, metabolic pathways, and cell reproduction were artificially and concisely redesigned with the vesicle-based system. We intentionally avoided using the sophisticated molecular machinery of the biological cells and tried to redesign the cells in the simplest forms. This review focuses on the similarities and differences between the biological cells and our synthetic minimal cell concerning each concept of cells. Such comparisons between natural and artificial cells will provide insights on how the molecules should be assembled to create living systems to the wide readers in the field of synthetic biology, artificial cells, and protocells research. This review article is an extended version of the Japanese article "Growth and division of vesicles coupled with information molecules," published in SEIBUTSU-BUTSURI vol. 61, p. 378-381 (2021).

Nanocompartment-confined polymerization in living systems

Polymerization in living systems has become an effective strategy to regulate cell functions and behavior. However, the requirement of high concentrations of monomers, the existence of complicated intracorporal interferences, and the demand for extra external stimulations hinder their further biological applications. Herein, a nanocompartment-confined strategy that provides a confined and secluded environment for monomer enrichment and isolation is developed to achieve high polymerization efficiency, reduce the interference from external environment, and realize broad-spectrum polymerizations in living systems. For exogenous photopolymerization, the light-mediated free-radical polymerization of sodium 4-styrenesulfonate induces a 2.7-fold increase in the reaction rate with the protection of a confined environment. For endogenous hydrogen peroxide-responsive polymerization, p‑aminodiphenylamine hydrochloride embedded in a nanocompartment not only performs a 6.4-fold higher reaction rate than that of free monomers, but also activates an effective second near-infrared photoacoustic imaging-guided photothermal immunotherapy at tumor sites. This nanocompartment-confined strategy breaks the shackles of conventional polymerization, providing a universal platform for in vivo synthesis of polymers with diverse structures and functions.

Hemin-catalyzed oxidative oligomerization of p-aminodiphenylamine (PADPA) in the presence of aqueous sodium dodecylbenzenesulfonate (SDBS) micelles

In a previous report on the enzymatic synthesis of the conductive emeraldine salt form of polyaniline (PANI-ES) in aqueous solution using PADPA (p-aminodiphenylamine) as monomer, horseradish peroxidase isoenzyme C (HRPC) was applied as a catalyst at pH = 4.3 with H₂O₂ as a terminal oxidant. In that work, anionic vesicles were added to the reaction mixture for (i) guiding the reaction to obtain poly(PADPA) products that resemble PANI-ES, and for (ii) preventing product precipitation (known as the “template effect”). In the work now presented, instead of native HRPC, only its prosthetic group ferric heme b (= hemin) was utilized as a catalyst, and micelles formed from SDBS (sodium dodecylbenzenesulfonate) served as templates. For the elaborated optimal reaction conditions, complementary UV/vis/NIR, EPR, and Raman spectroscopy measurements clearly showed that the reaction mixture obtained after completion of the reaction contained PANI-ES-like products as dominating species, very similar to the products formed with HRPC as catalyst. HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonate) was found to have a positive effect on the reaction rate as compared to dihydrogenphosphate. This work is the first on the template-assisted formation of PANI-ES type products under mild, environmentally friendly conditions using hemin as a cost-effective catalyst.

Polyaniline emeraldine salt-type products were synthesized under mild, environmentally friendly conditions using hemin as a cost-effective catalyst, p-aminodiphenylamine (PADPA) as a monomer, and micelles formed from SDBS as templates.

Transformation of atenolol by a laccase-mediator system: Efficiencies, effect of water constituents, and transformation pathways

In this study, we investigated the transformation of atenolol (ATL) by the naturally occurring laccase from Trametes versicolor in aqueous solution. Removal efficiency of ATL via laccase-catalyzed reaction in the presence of various laccase mediators was examined, and found that only the mediator 2, 2, 6, 6-tetramethyl-1-piperidinyloxy (TEMPO) was able to greatly promote ATL transformation. The influences of TEMPO concentration, laccase dosage, as well as solution pH and temperature on ATL transformation efficiency were tested. As TEMPO concentrations was increased from 0 to 2000 μM, ATL transformation efficiency first increased and then decreased, and the optimal TEMPO concentration was determined as 500 μM. ATL transformation efficiency was gradually increased with increasing laccase dosage. ATL transformation was highly pH-dependent with an optimum pH of 7.0, and it was almost constant over a temperature range of 25-50 °C. Humic acid inhibited ATL transformation through competition reaction with laccase. The presence of anions HCO₃^- and CO₃^2- reduced ATL transformation due to both anions enhanced solution pHs, while Cl^-, SO₄^2-, and NO₃^- at 10 mM showed no obvious influence. The main transformation products were identified, and the potential transformation pathways were proposed. After enzymatic treatment, the toxicity of ATL and TEMPO mixtures was greatly reduced. The results of this study might present an alternative clean strategy for the remediation of ATL contaminated water matrix.

Green synthesis of conductive polyaniline by Trametes versicolor laccase using a DNA template

The green synthesis of highly conductive polyaniline by using two biological macromolecules, i.e laccase as biocatalyst, and DNA as template/dopant, was achieved in this work. Trametes versicolor laccase B (TvB) was found effective in oxidizing both aniline and its less toxic/mutagenic dimer N-phenyl-p-phenylenediamine (DANI) to conductive polyaniline. Reaction conditions for synthesis of conductive polyanilines were set-up, and structural and electrochemical properties of the two polymers were extensively investigated. When the less toxic aniline dimer was used as substrate, the polymerization reaction was faster and gave less-branched polymer. DNA was proven to work as hard template for both enzymatically synthesized polymers, conferring them a semi-ordered morphology. Moreover, DNA also acts as dopant leading to polymers with extraordinary conductive properties (∼6 S/cm). It can be envisaged that polymer properties are magnified by the concomitant action of DNA as template and dopant. Herein, the developed combination of laccase and DNA represents a breakthrough in the green synthesis of conductive materials.

Synthesizing Polyaniline With Laccase/O2 as Catalyst

The polymerization of aniline to polyaniline (PANI) can be achieved chemically, electrochemically or enzymatically. In all cases, the products obtained are mixtures of molecules which are constituted by aniline units. Depending on the synthesis conditions there are variations (i) in the way the aniline molecules are connected, (ii) in the average number of aniline units per molecule, (iii) in the oxidation state, and (iv) in the degree of protonation. For many possible applications, the synthesis of electroconductive PANI with para-N-C-coupled aniline units in their half-oxidized and protonated state is of interest. This is the emeraldine salt form of PANI, abbreviated as PANI-ES. The enzymatic synthesis of PANI-ES is an environmentally friendly alternative to conventional chemical or electrochemical methods. Although many studies have been devoted to the in vitro synthesis of PANI-ES by using heme peroxidases with added hydrogen peroxide (H2O2) as the oxidant, the application of laccases is of particular interest since the oxidant for these multicopper enzymes is molecular oxygen (O2) from air, which is beneficial from environmental and economic points of view. In vivo, laccases participate in the synthesis and degradation of lignin. Various attempts of synthesizing PANI-ES with laccase/O2 in slightly acidic aqueous media from aniline or the linear aniline dimer PADPA (p-aminodiphenylamine) are summarized. Advances in the understanding of the positive effects of soft dynamic templates, as chemical structure guiding additives (anionic polyelectrolytes, micelles, or vesicles), for obtaining PANI-ES-rich products are highlighted. Conceptually, some of these template effects appear to be related to the effect "dirigent proteins" exert in the biosynthesis of lignin. In both cases intermediate radicals are formed enzymatically which then must react in a controlled way in follow-up reactions for obtaining the desired products. These follow-up reactions are controlled to some extent by the templates or specific proteins.

Effect of Template Type on the Trametes versicolor Laccase-Catalyzed Oligomerization of the Aniline Dimer p-Aminodiphenylamine (PADPA)

Many previous studies have shown that (i) the oxidation of aniline or the aniline dimer p-aminodiphenylamine (PADPA) in a slightly acidic aqueous solution can be catalyzed with heme peroxidases or multicopper laccases and that (ii) subsequent reactions lead to oligomeric or polymeric products, which resemble chemically synthesized polyaniline in its conductive emeraldine salt form (PANI-ES), provided that (iii) an anionic "template" is present in the reaction medium. Good templates are anionic polyelectrolytes, micelles, or vesicles. Under optimal conditions, their presence directs the reactions in a positive way toward the desired formation of PANI-ES-type products. The effect of four different types of anionic templates on the formation of PANI-ES-like products from PADPA was investigated and compared by using Trametes versicolor laccase (TvL) as a catalyst in an aqueous pH 3.5 solution at room temperature. All four templates contain sulfonate groups: the sodium salt of the polyelectrolyte sulfonated polystyrene (SPS), micelles from sodium dodecylbenzenesulfonate (SDBS), vesicles from a 1:1 molar mixture of SDBS and decanoic acid, and vesicles from sodium bis(2-ethylhexyl)sulfosuccinate (AOT). Although with all four templates, stable, inkjet-printable solutions or suspensions consisting of PANI-ES-type products were obtained under optimized conditions, considerably higher amounts of TvL were required with SDBS micelles to achieve comparable monomer conversion to PANI-ES-like products during the same time period when compared to those with SPS or the two types of vesicles. This makes SDBS micelles less attractive as templates for the investigated reaction. In situ UV/vis/near-infrared, electron paramagnetic resonance (EPR), and Raman spectroscopy measurements in combination with an high-performance liquid chromatography analysis of extracted reaction products, which were deprotonated and chemically reduced, showed seemingly small but significant differences in the composition of the mixtures obtained when reaching reaction equilibrium after 24 h. With the two vesicle systems, the content of unwanted substituted phenazine units was lower than in the case of SPS polyelectrolyte and SDBS micelles. The EPR spectra indicate a more localized, narrower distribution of electronic states of the paramagnetic centers of the PANI-ES-type products synthesized in the presence of the two vesicle systems when compared to that of the similar products obtained with the SPS polyelectrolyte and SDBS micelles as templates. Overall, the data obtained from the different complementary methods indicate that with the two vesicle systems structurally more uniform (regular) PANI-ES-type products formed. Among the two investigated vesicle systems, for the investigated reaction (oxidation of PADPA with TvL and O2), AOT appears a somewhat better choice as it leads to a higher content of the PANI-ES polaron form.

Template-Confined Growth of Poly(4-aminodiphenylamine) Nanosheets as Positive Electrode toward Superlong-Life Asymmetric Supercapacitor

Two-dimensional conducting polymers nanosheet prepared by the soft-template-assisted technique in aqueous system still has rarely been reported, especially the formation of nanosheets structure by protonic acid assisted controlling the stability of the micelles method. Herein, a facile, one-step, bottom-up approach is developed to synthesize novel and uniform conductive poly(4-aminodiphenylamine) (P(4-ADPA)) nanosheets with controlled morphology via regulating the proton acid concentration during the self-assembly of surfactant lamellar micelles. The as-produced conducting P(4-ADPA) demonstrates a integral nanoframework structure with uniform and intertwined nanosheets, resulting in a satisfactory specific capacitance of 395 F g^-1 at the current density of 0.5 A g^-1. Furthermore, another pseudocapacitor electrode material, urchin-like W₁₈O₄₉, is selected as a negative electrode material to fabricate a novel P(4-ADPA)//W₁₈O₄₉ asymmetric supercapacitor, which extends the operating voltage window up to 1.5 V, provides an energy density of 24.4 W h kg^-1 at a high power density of 1491 W kg^-1, and possesses superlong-life of 92% capacitance retention after 10 000 cycles. Therefore, the present work will propose an affordable strategy to design novel conducting polymer nanosheets and open up the possibility of cheap conductive polymers to meet the demands of energy storage.

Enzymatic Synthesis of Highly Electroactive Oligoanilines from a p-Aminodiphenylamine/Aniline Mixture with Anionic Vesicles as Templates

Oligoanilines with characteristic properties of the electrically conductive emeraldine salt form of polyaniline (PANI-ES) are promising molecules for various applications. A mixture of such oligoanilines can be obtained, for example, enzymatically under mild conditions from the linear aniline dimer p-aminodiphenylamine (PADPA) with hydrogen peroxide (H₂O₂) and low amounts of horseradish peroxidase (HRP) in an aqueous pH = 4.3 suspension of anionic vesicles formed from AOT, the sodium salt of bis(2-ethylhexyl)sulfosuccinate. However, the simultaneous formation of undesired side products containing phenazine-type units or oxygen atoms is unsatisfactory. We have found that this situation can be improved considerably by using a mixture of PADPA and aniline instead of PADPA only but otherwise nearly identical conditions. The PANI-ES-like oligoaniline products that are obtained from the PADPA and aniline mixture were not only found to have much lower contents of phenazine-type units and not contain oxygen atoms but also were shown to be more electroactive in cyclic voltammetry measurements than the PANI-ES-like products obtained from PADPA only. The AOT vesicle suspension remained stable without product precipitation during and after the entire reaction so that it could be analyzed by in situ UV/visible/near-infrared, in situ electron paramagnetic resonance, and in situ Raman spectroscopy measurements. These measurements were complemented with ex situ high-performance liquid chromatography analyses of the deprotonated and reduced products formed from mixtures of PADPA and either fully or partially deuterated aniline. On the basis of the results obtained, a reaction mechanism is proposed for explaining this improved HRP-triggered, vesicle-assisted synthesis of electroactive PANI-ES-like products. The oligomeric products obtained can be further used, without additional special workup, for example, to coat electrodes for their possible application in biosensor devices.

Inhibition of lysozyme's polymerization activity using a polymer structural mimic

Hen egg white lysozyme (HEWL) is a green catalyst capable of polymerizing the formation of 2-ethynylpyridine. 1,3-di(2-pyridyl)propane (DPP) is a mimic of the polymer repeating unit and a polymerization inhibitor. DPP's interaction with HEWL reveals structural insight into the mechanism of polymerization.

How experimental details matter. The case of a laccase-catalysed oligomerisation reaction

The Trametes versicolor laccase (TvL)-catalysed oligomerisation of the aniline dimer p-aminodiphenylamine (PADPA) was investigated in an aqueous medium of pH = 3.5, containing 80–100 nm-sized anionic vesicles formed from AOT, the sodium salt of bis(2-ethylhexyl)sulfosuccinic acid. If run under optimal conditions, the reaction yields oligomeric products which resemble the emeraldine salt form of polyaniline (PANI-ES) in its polaron state, known to be the only oxidation state of linear PANI which is electrically conductive. The vesicles serve as “templates” for obtaining products with the desired PANI-ES-like features. For this complex, heterogeneous, vesicle-assisted, and enzyme-mediated reaction, in which dissolved dioxygen also takes part as a re-oxidant for TvL, small changes in the composition of the reaction mixture can have significant effects. Initial conditions may not only affect the kinetics of the reaction, but also the outcome, i.e., the product distribution once the reaction reaches its equilibrium state. While a change in the reaction temperature from T ≈ 25 to 5 °C mainly influenced the rate of reaction, increase in enzyme concentration and the presence of millimolar concentrations of chloride ions were found to have significant undesired effects on the outcome of the reaction. Chloride ions, which may originate from the preparation of the pH = 3.5 solution, inhibit TvL, such that higher TvL concentrations are required than without chloride to yield the same product distribution for the same reaction runtime as in the absence of chloride. With TvL concentrations much higher than the elaborated value, the products obtained clearly were different and over-oxidised. Thus, a change in the activity of the enzyme was found to have influence not only on kinetics but also led to a change in the final product distribution, molecular structure and electrical properties, which was a surprising find. The complementary analytical methods which we used in this work were in situ UV/vis/NIR, EPR, and Raman spectroscopy measurements, in combination with a detailed ex situ HPLC analysis and molecular dynamics simulations. With the results obtained, we would like to recall the often neglected or ignored fact that it is important to describe and pay attention to the experimental details, since this matters for being able to perform experiments in a reproducible way.

A laccase-catalysed oligomerisation of p-aminodiphenylamine was investigated in an aqueous medium containing 80–100 nm-sized anionic vesicles formed from AOT, the sodium salt of bis(2-ethylhexyl)sulfosuccinic acid.

Understanding the Enhanced Magnetic Response of Aminocholesterol Doped Lanthanide-Ion-Chelating Phospholipid Bicelles

Cholesterol (Chol-OH) and its conjugates are powerful molecules for engineering the physicochemical and magnetic properties of phospholipid bilayers in bicelles. Introduction of aminocholesterol (3β-amino-5-cholestene, Chol-NH₂) in bicelles composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and the thulium-ion-chelating phospholipid 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA/Tm³⁺) results in unprecedented high magnetic alignments by selectively tuning the magnetic susceptibility Δχ of the bilayer. However, little is known on the underlying mechanisms behind the magnetic response and, more generally, on the physicochemical forces governing a Chol-NH₂ doped DMPC bilayer. We tackled this shortcoming with a multiscale bottom-up comparative investigation of Chol-OH and Chol-NH₂ mixed with DMPC. First, simplified monolayer models on a Langmuir trough were employed to compare the two steroid molecules at various contents in DMPC. In a second step, a molecular dynamics (MD) simulation allowed for a more representative model of the bicelle bilayer while monitoring the amphiphiles and their interactions on the molecular level. In a final step, we moved away from the models and investigated the effect of temperature on the structure and magnetic alignment of Chol-NH₂ doped bicelles by SANS. The DMPC/steroid monolayer studies showed that Chol-OH induces a larger condensation effect than Chol-NH₂ at steroid contents of 16 and 20 mol %. However, this tendency was inversed at steroid contents of 10, 30, and 40 mol %. Although the MD simulation with 16 mol % steroid revealed that both compounds induce a liquid-ordered state in DMPC, the bilayer containing Chol-NH₂ was much less ordered than the analogous system containing Chol-OH. Chol-NH₂ underwent significantly more hydrogen bonding interactions with neighboring DMPC lipids than Chol-OH. It seems that, by altering the dynamics of the hydrophilic environment of the bicelle, Chol-NH₂ changes the crystal field and angle of the phospholipid-lanthanide DMPE-DTPA/Tm³⁺ complex. These parameters largely determine the magnetic susceptibility Δχ of the complex, explaining the SANS results, which show significant differences in magnetic alignment of the steroid doped bicelles. Highly magnetically alignable DMPC/Chol-NH₂/DMPE-DTPA/Tm³⁺ (molar ratio 16:4:5:5) bicelles were achieved up to temperatures of 35 °C before a thermoreversible rearrangement into nonalignable vesicles occurred. The results confirm the potential of Chol-NH₂ doped bicelles to act as building blocks for the development of the magnetically responsive soft materials of tomorrow.

Enantioselective C-C Bond Formation Enhanced by Self-Assembly of Achiral Surfactants

The use of achiral surfactant assemblies as a reaction platform for an alkylation reaction resulted in a high enantiomeric excess. Dilauryldimethylammonium bromide (DDAB) vesicles were modified with cholesterol to promote alkylation of N-(diphenylmethylene)glycine tert-butyl ester (DMGBE) with benzyl bromide, resulting in high conversion (∼90%) and high enantioselectivity (up to 80%). The R-enantiomer was formed on using the DDAB vesicles, whereas the use of phospholipid liposomes prepared from 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) produced an excess of the S-enantiomer. Considering the chemical structures of the reaction substrates and amphiphiles as well as the membrane structures and properties of DDAB vesicles and DOPC liposomes, it is suggested that the enantiomeric excesses result from the location of the quaternary amine of the amphiphiles and the DMGBE at the outer surface of the membrane. We show that the enantioselective reaction at the surface of the self-assembly could be regulated by adjusting the chemical structures and resulting membrane properties of the self-assembly.

The fate and transformation of tetrabromobisphenol A in natural waters, mediated by oxidoreductase enzymes

In this study, we examined the fate and transformation of tetrabromobisphenol A (TBBPA), mediated by the representative oxidoreductases (laccase and horseradish peroxidase (HRP)) in natural waters. Both enzymes could readily degrade TBBPA at environmentally relevant concentrations (e.g., 10 nmol L^-1) in natural waters. After 2 hour treatment, 0.5-25% and 35-65% of TBBPA were degraded in municipal wastewater and natural surface waters by a laccase or HRP-catalyzed reaction, respectively. Enzyme kinetics evaluations indicated that the k_CAT/K_M ratio of HRP (1.01 μM^-1 s^-1) was much higher than that of laccase (0.032 μM^-1 s^-1) for TBBPA degradation, suggesting that the catalytic performance of HRP towards TBBPA was more efficient than that of laccase. The effects of pH and organic matter on the enzymatic degradation efficiency were explored. Organic matter in the water inhibited the enzymatic degradation efficiency and the degree of inhibition was proportional to the UV₂₅₄ values of water. Product identification indicated that the product distribution of TBBPA at low concentration (10 nmol L^-1) was similar to that of TBBPA at high concentration (10 μmol L^-1). The degradation intermediates underwent further enzymatic reaction to yield higher molecular weight secondary products. Toxicity assessment showed that TBBPA toxicity was effectively eliminated by the oxidoreductase-catalyzed reaction.

Fluorescent Probe Study of AOT Vesicle Membranes and Their Alteration upon Addition of Aniline or the Aniline Dimer p-Aminodiphenylamine (PADPA)

Artificial vesicles formed from sodium bis(2-ethylhexyl) sulfosuccinate (AOT) in aqueous solution are used successfully as additives for enzymatic oligomerizations or polymerizations of aniline or the aniline dimer p-aminodiphenylamine (PADPA) under slightly acidic conditions (e.g., pH 4.3 with horseradish peroxidase and hydrogen peroxide as oxidants). In these systems, the reactions occur membrane surface-confined. Therefore, (i) the physicochemical properties of the vesicle membrane and (ii) the interaction of aniline or PADPA with the AOT membrane play crucial roles in the progress and final outcome of the reactions. For this reason, the properties of AOT vesicles with and without added aniline or PADPA were investigated by using two fluorescent membrane probes: 1,6-diphenyl-1,3,5-hexatriene (DPH) and 6-lauroyl-2-dimethylaminonaphthalene (Laurdan). DPH and Laurdan were used as "sensors" of the membrane fluidity, surface polarity, and membrane phase state. Moreover, the effect of hexanol, alone or in combination with aniline or PADPA, as a possible modifier of the AOT membrane, was also studied with the aim of evaluating whether the membrane fluidity and surface polarity is altered significantly by hexanol, which, in turn, may have an influence on the mentioned types of reactions. The data obtained indicate that the AOT vesicle membrane at room temperature and pH 4.3 (0.1 M NaH₂PO₄) is more fluid and has a more polar surface than in the case of fluid phospholipid vesicle membranes formed from 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC). Furthermore, the fluorescence measurements indicate that mixed AOT-hexanol membranes are less fluid than pure AOT membranes and that they have a lower surface polarity than pure AOT membranes. PADPA strongly binds to AOT and to mixed AOT/hexanol membranes and leads to drastic changes in the membrane properties (decrease in fluidity and surface polarity), resulting in Laurdan fluorescence spectra, which are characteristic for intramembrane phase separations (coexistence of ordered and disordered domains). This means that highly fluid AOT membranes transform upon the addition of PADPA into membranes that have ordered domains. Although the relevance of this finding for the enzymatic oligomerization of PADPA is not yet clear, it is also of interest if one likes to use heterogeneous vesicle membranes as additives for carrying out membrane surface-confined reactions that do not necessarily involve PADPA as a reactant.

Liposomes Can Achieve Enantioselective C-C Bond Formation of an α-Amino Acid Derivative in Aqueous Media

We first report that a highly enantioselective C-C bond formation reaction was achieved with liposomes in aqueous media. Alkylation of N-(diphenylmethylene)glycine tert-butyl ester (DMGBE) with benzyl bromide was conducted in the presence of cetyltrimethylammonium bromide micelles, resulting in a high conversion of DMGBE but little enantiomeric excess (e.e.) of the product. The same reaction was then carried out in 1,2-dioleoyl-sn-glycero-3-phosphocholine liposome suspensions, where the e.e. values were high (at least 90 % (S)), indicating that the liposome membranes can behave as the promoter of the enantioselective reaction. Changing the type of lipid to 1,2-dipalmitoyl-sn-glycero-3-phosphocholine to form a more ordered bilayer membrane lowered the reaction conversion but still maintained high e.e.% , that is, >90 (S), regardless of lipid chirality. It is indicated that multiple interactions between the DMGBE intermediate and lipid molecules promoted the migration of the intermediate into the interior of the membrane, whose bottom side (Si face) could be free for alkylation. These results suggest that liposomes can promote and regulate the alkylation of amino acid derivatives.

Synthesis and characterization of aniline-dimer-based electroactive benzoxazine and its polymer

Benzoxazine incorporating an aniline dimer in its structure has satisfactory electroactivity and undergoes both amine-catalyzed and autocatalytic polymerization.

Lysozyme-catalyzed formation of a conjugated polyacetylene

Hen egg white lysozyme catalyzes the polymerization of 2-ethynylpyridine in water as the singular protein catalyst. This marks the first time a protein has been observed generating conjugated polymers from alkynes.

Enzymatic oligomerization and polymerization of arylamines: state of the art and perspectives

The literature concerning the oxidative oligomerization and polymerization of various arylamines, e.g., aniline, substituted anilines, aminonaphthalene and its derivatives, catalyzed by oxidoreductases, such as laccases and peroxidases, in aqueous, organic, and mixed aqueous organic monophasic or biphasic media, is reviewed. An overview of template-free as well as template-assisted enzymatic syntheses of oligomers and polymers of arylamines is given. Special attention is paid to mechanistic aspects of these biocatalytic processes. Because of the nontoxicity of oxidoreductases and their high catalytic efficiency, as well as high selectivity of enzymatic oligomerizations/polymerizations under mild conditions-using mainly water as a solvent and often resulting in minimal byproduct formation-enzymatic oligomerizations and polymerizations of arylamines are environmentally friendly and significantly contribute to a "green" chemistry of conducting and redox-active oligomers and polymers. Current and potential future applications of enzymatic polymerization processes and enzymatically synthesized oligo/polyarylamines are discussed.

How Anionic Vesicles Steer the Oligomerization of Enzymatically Oxidized p-Aminodiphenylamine (PADPA) toward a Polyaniline Emeraldine Salt (PANI-ES)-Type Product

The oxidation of the aniline dimer, p-aminodiphenylamine (PADPA), with Trametes versicolor laccase and O2 in an aqueous solution of pH 3.5 is controlled by negatively charged AOT (sodium bis(2-ethylhexyl) sulfosuccinate) vesicles. With vesicles, a product resembling polyaniline in its emeraldine salt form (PANI-ES) is obtained, in contrast to the reaction without vesicles where no such product is formed. To understand this observation, the product distribution and structures from the reaction with and without vesicles were determined by using partially selectively deuterated PADPA as a starting material and analyzing the products with HPLC-MS. We found that in the presence of vesicles the main product is obtained in about 50% yield, which is the N-C-para-coupled PADPA dimer that has spectroscopic properties of PANI-ES, as determined by time-dependent density functional theory (TD-DFT) calculations. A secondary reaction route leads to longer PADPA oligomers that must contain a phenazine core. Without vesicles, PADPA and its products undergo partial hydrolysis, but in the presence of vesicles, hydrolysis does not occur. Because molecular dynamics (MD) simulations show that the main intermediate oxidation product is embedded within the vesicle membrane, where the water content is very low, we propose that the microenvironment of the vesicle membrane protects the oxidation products from unwanted hydrolysis.

Insight into the template effect of vesicles on the laccase-catalyzed oligomerization of N-phenyl-1,4-phenylenediamine from Raman spectroscopy and cyclic voltammetry measurements

We report about the first Raman spectroscopy study of a vesicle-assisted enzyme-catalyzed oligomerization reaction. The aniline dimer N-phenyl-1,4-phenylenediamine (= p-aminodiphenylamine, PADPA) was oxidized and oligomerized with Trametes versicolor laccase and dissolved O₂ in the presence of sodium bis(2-ethylhexyl)sulfosuccinate (AOT) vesicles (80–100 nm diameter) as templates. The conversion of PADPA into oligomeric products, poly(PADPA), was monitored during the reaction by in situ Raman spectroscopy. The results obtained are compared with UV/vis/NIR and EPR measurements. All three complementary methods indicate that at least some of the poly(PADPA) products, formed in the presence of AOT vesicles, resemble the conductive emeraldine salt form of polyaniline (PANI-ES). The Raman measurements also show that structural units different from those of “ordinary” PANI-ES are present too. Without vesicles PANI-ES-like products are not obtained. For the first time, the as-prepared stable poly(PADPA)-AOT vesicle suspension was used directly to coat electrodes (without product isolation) for investigating redox activities of poly(PADPA) by cyclic voltammetry (CV). CV showed that poly(PADPA) produced with vesicles is redox active not only at pH 1.1–as expected for PANI-ES–but also at pH 6.0, unlike PANI-ES and poly(PADPA) synthesized without vesicles. This extended pH range of the redox activity of poly(PADPA) is important for applications.

Radical-Mediated Enzymatic Polymerizations

Polymerization reactions are commonly effected by exposing monomer formulations to some initiation stimulus such as elevated temperature, light, or a chemical reactant. Increasingly, these polymerization reactions are mediated by enzymes--catalytic proteins--owing to their reaction efficiency under mild conditions as well as their environmental friendliness. The utilization of enzymes, particularly oxidases and peroxidases, for generating radicals via reduction-oxidation mechanisms is especially common for initiating radical-mediated polymerization reactions, including vinyl chain-growth polymerization, atom transfer radical polymerization, thiol-ene step-growth polymerization, and polymerization via oxidative coupling. While enzyme-mediated polymerization is useful for the production of materials intended for subsequent use, it is especially well-suited for in situ polymerizations, where the polymer is formed in the place where it will be utilized. Such polymerizations are especially useful for biomedical adhesives and for sensing applications.

Enzymes as Green Catalysts for Precision Macromolecular Synthesis

The present article comprehensively reviews the macromolecular synthesis using enzymes as catalysts. Among the six main classes of enzymes, the three classes, oxidoreductases, transferases, and hydrolases, have been employed as catalysts for the in vitro macromolecular synthesis and modification reactions. Appropriate design of reaction including monomer and enzyme catalyst produces macromolecules with precisely controlled structure, similarly as in vivo enzymatic reactions. The reaction controls the product structure with respect to substrate selectivity, chemo-selectivity, regio-selectivity, stereoselectivity, and choro-selectivity. Oxidoreductases catalyze various oxidation polymerizations of aromatic compounds as well as vinyl polymerizations. Transferases are effective catalysts for producing polysaccharide having a variety of structure and polyesters. Hydrolases catalyzing the bond-cleaving of macromolecules in vivo, catalyze the reverse reaction for bond forming in vitro to give various polysaccharides and functionalized polyesters. The enzymatic polymerizations allowed the first in vitro synthesis of natural polysaccharides having complicated structures like cellulose, amylose, xylan, chitin, hyaluronan, and chondroitin. These polymerizations are "green" with several respects; nontoxicity of enzyme, high catalyst efficiency, selective reactions under mild conditions using green solvents and renewable starting materials, and producing minimal byproducts. Thus, the enzymatic polymerization is desirable for the environment and contributes to "green polymer chemistry" for maintaining sustainable society.

MOF-templated rough, ultrathin inorganic microcapsules for enzyme immobilization

Enzyme-containing ultrathin titania microcapsules with rough surfaces were prepared by using MOF as a hard template to mediate the hierarchical structures of the microcapsule shell.