Methyl Formate Formation from Methanol Oxidation Using Supported Gold–Palladium Nanoparticles

Stable Cu/Cu2O/CuN3@NC Catalysts for Aqueous Phase Reforming of Methanol

Aqueous-phase reforming of methanol represents a promising avenue for hydrogen (H2) production. However, developing highly efficient and low-cost nonprecious catalysts remains challenging. Here, we report the synthesis of Cu-based catalysts with Cu, Cu2O, and CuN3 nanoparticles anchored on the nitrogen-doped carbon, forming Cu0/Cu+/Cu-N3 active sites. This catalyst achieves a H2 production rate of 140.1 μmol/gcat/s at 210 °C, which is several times to 2 orders of magnitude higher than that of Cu-, Ni-, even Pt-based catalysts, demonstrating excellent long-term stability over 350 h at 210 °C. A mechanism investigation reveals that the Cu-N3 site facilitates water dissociation into *OH and improves *CO and *OH conversion, leading to enhanced CO conversion and H2 production kinetics.

Defective Nb2C MXene Cocatalyst on TiO2 Microsphere for Enhanced Photocatalytic CO2 Conversion to Methane

Sustainable and scalable solar-energy-driven CO2 conversion into fuels requires earth-abundant and stable photocatalysts. In this work, a defective Nb2C MXene as a cocatalyst and TiO2 microspheres as photo-absorbers, constructed via a coulombic force-driven self-assembly, is synthesized. Such photocatalyst, at an optimized loading of defective Nb2C MXene (5% def-Nb2C/TiO2), exhibits a CH4 production rate of 7.23 µmol g-1 h-1, which is 3.8 times higher than that of TiO2. The Schottky junction at the interface improves charge transfer from TiO2 to defective Nb2C MXene and the electron-rich feature (nearly free electron states) enables multielectron reaction of CO2, which apparently leads to high activity and selectivity to CH4 (sel. 99.5%) production. Moreover, DFT calculation demonstrates that the Fermi level (EF) of defective Nb2C MXene (-0.3 V vs NHE) is more positive than that of Nb2C MXene (-1.0 V vs NHE), implying a strong capacity to accept photogenerated electrons and enhance carrier lifetime. This work gives a direction to modify the earth-abundant MXene family as cocatalysts to build high-performance photocatalysts for energy production.

Selective oxidation conversion of methanol/dimethyl ether

As important platform compounds, methanol and dimethyl ether (DME) are vital bridges between the coal chemical, petrochemical and fine chemical industries. At present, the synthesis of methanol/DME has been industrialized, and the production capacity is much larger than the market demand. Therefore, the conversion of methanol/DME into more valuable chemicals is an important and significant topic. The synthesis of high value-added oxygenated chemicals and diesel oil additives from methanol/DME by an oxidation method has attracted substantial attention due to it being green and environmentally friendly and having good atom economy. In this feature article, we have summarized the recent advances in the synthesis of formaldehyde, methyl formate, dimethoxymethane, and polyoxymethylene dimethyl ethers, from the selective oxidation of methanol/DME, and further discussed the adsorption and activation of reactant molecules, selective cleavage of C-O, C-H or O-H bonds in methanol/DME molecules and the C-O chain growth in the target products. In the end, major challenges and future prospects are proposed from the viewpoint of catalyst design and application. It is expected that this feature article will provide theoretical guidance for the activation and cleavage of C-O, C-H, or O-H bonds in other small molecules of alcohol/ether as well as low-carbon alkanes, so as to synthesize high value-added chemicals.

An efficient catalyst of CuPt/TiO2 for photocatalytic direct dehydrogenation of methanol to methyl formate at ambient temperature

CuPt alloy nanoparticles on TiO2 are highly effective for photocatalytic direct dehydrogenation of methanol to methyl formate at ambient temperature.

Near-Surface Gas-Phase Methoxymethanol Is Generated by Methanol Oxidation over Pd-Based Catalysts

Catalytic conversion of alcohols underlies many commodity and fine chemical syntheses, but a complete mechanistic understanding is lacking. We examined catalytic oxidative conversion of methanol near atmospheric pressure using operando small-aperture molecular beam time-of-flight mass spectrometry, interrogating the gas phase 500 μm above Pd-based catalyst surfaces. In addition to a variety of stable C_1-3 species, we detected methoxymethanol (CH₃OCH₂OH)─a rarely observed and reactive C₂ oxygenate that has been proposed to be a critical intermediate in methyl formate production. Methoxymethanol is observed above Pd, Au_xPd_y alloys, and oxide-supported Pd (common methanol oxidation catalysts). Experiments establish temperature and reactant feed ratio dependences of methoxymethanol generation, and calculations using density functional theory are used to examine the energetics of its likely formation pathway. These results suggest that future development of catalysts and microkinetic models for methanol oxidation should be augmented and constrained to accommodate the formation, desorption, adsorption, and surface reactions involving methoxymethanol.

Oxidative N-Formylation of Secondary Amines Catalyzed by Reusable Bimetallic AuPd-Fe3O4 Nanoparticles

Bimetallic catalysts are gaining attention due to their characteristics of promoting reactivity and selectivity in catalyzed reactions. Herein, a new catalytic N-formylation of secondary amines using AuPd–Fe₃O₄ at room temperature is reported. Methanol was utilized as the formyl source and 1.0 atm of O₂ gas served as an external oxidant. The bimetallic catalyst, consisting of Au and Pd, makes the reaction more efficient than that using each metal separately. In addition, the catalyst can be effectively recycled owing to the Fe₃O₄ support.

Conversion of Green Methanol to Methyl Formate

Methyl formate is a key component for both defossilized industry and mobility. The current industrial production via carbonylation of methanol has various disadvantages such as high requirements on reactant purity and low methanol conversion rates. In addition, there is a great interest in replacing the conventional homogeneous catalyst with a heterogeneous one, among other things to improve the downstream processing. This is why new approaches for methyl formate are sought. This review summarizes promising approaches for methyl formate production using methanol as a reactant.

Switchable Binding Energy of Ionic Compounds and Application in Customizable Ligand Exchange for Colloid Nanocrystals

The ability to engineer the surface ligands or adsorbed molecules on colloid nanocrystals (NCs) is important for various applications, as the physical and chemical properties are strongly affected by the surface chemistry. Here, we develop a facile and generalized ionic compound-mediated ligand-exchange strategy based on density functional theory calculations, in which the ionic compounds possess switchable bonding energy when they transfer between the ionized state and the non-ionized state, hence catalyzing the ligand-exchange process. By using an organic acid as the intermediate ligand, ligands such as oleylamine, butylamine, polyvinylpyrrolidone, and poly(vinyl alcohol) can be freely exchanged on the surface of Au NCs. Benefiting from this unique ligand-exchange strategy, the ligands with strong bonding energy can be replaced by weak ones, which is hard to realize in traditional ligand-exchange processes. The ionic compound-mediated ligand exchange is further utilized to improve the catalytic properties of Au NCs, facilitate the loading of nanoparticles on substrates, and tailor the growth of colloid NCs. These results indicate that the mechanism of switchable bonding energy can be significantly expanded to manipulate the surface property and functionalization of NCs that have applications in a wide range of chemical and biomedical fields.

Advantageous Role of Ir0 Supported on TiO2 Nanosheets in Photocatalytic CO2 Reduction to CH4: Fast Electron Transfer and Rich Surface Hydroxyl Groups

Ir-based heterogeneous catalysts for photocatalytic CO₂ reduction have rarely been reported and are worthy of investigation. In this work, TiO₂ nanosheets with a higher specific surface area and more oxygen vacancies were employed to support Ir metal by impregnation (Imp) and ethylene glycol (EG) reduction methods. In comparison with Ir/TiO₂ (Imp) and TiO₂, Ir/TiO₂ (EG) exhibited excellent photocatalytic performance toward CO₂ reduction, especially for CH₄ production on account of the oxygen defect of TiO₂ and rich surface hydroxyl groups produced from the interaction between TiO₂ nanosheets and metallic Ir. In situ ESR suggested that the oxygen defect was significant for CO₂ adsorption/activation. Furthermore, metallic Ir was beneficial for photogenerated electron transfer, surface hydroxyl generation, and adsorption of the CO intermediate, generating more available electrons and reducing agents for CH₄ production. In situ CO₂ DRIFTS confirmed the key synergistic interaction between the oxygen defect and metallic Ir in the photoreduction from CO₂ to CH₄.

Quantitative Conversion of Methanol to Methyl Formate on Graphene-Confined Nano-Oxides

We demonstrate the nearly quantitative conversion of methanol to methyl formate (MF) with a reliable durability on the reduced-graphene-oxide-confined VTiOx nanoparticles (rGO@VTiO). The rGO@VTiO exhibits superior low-temperature reactivity than the rGO-free VTiO, and the MF yield of 98.8% is even comparable with the noble metal catalysts. Both experiments and simulations demonstrate that the ultrathin rGO shell significantly impacts the shell/core interfacial electronic structure and the surface chemistry of the resultant catalysts, leading to remarkable reactivity in methanol to MF. rGO enhances the dispersion and loading rates of active monomeric/oligomeric VOx. In particular, the electron migration between the rGO shell and oxides core reinforces the acidity of rGO@VTiO in the absence of sulfate acidic sites. Moreover, both in situ NAP-XPS and DRIFTS investigations suggest that the lattice oxygen was involved in the oxidation of methanol and the MF was formed via the hemiacetal mechanism.

Efficient Oxidative Esterification of Furfural Using Au Nanoparticles Supported on Group 2 Alkaline Earth Metal Oxides

Furfural (FF) is a strategic product for the development of highly valued chemicals from biomass. The oxidation product of FF, furoic acid (FA), is an important precursor for the synthesis of green esters, such as methyl furoate. Taking into account issues with the direct furfural oxidation, furfural derivatives, such as alkyl furoates, can be easily prepared via oxidative esterification. Here, Au nanoparticles that were immobilized on alkaline-earth metal oxide supports were studied for the oxidative esterification of furfural while using alcohol as both reactant and solvent. The formation of esters is favored by the presence of basic sites on catalyst surface, resulting in high selectivity, preventing the formation of the acetal as a by-product. The Au/MgO sample provided up to 95% methyl furoate (MF) yield, a fast reaction rate, and high performance for furfural:Au molar ratios between 50 and 300. Furthermore, this catalyst was stable during reuse, since both the selectivity and the activity were maintained after four cycles. Oxidative esterification products were achieved in the presence of other alcohols, leading to the formation of esters of up to C5 (isopentyl furoate) with high selectivity (>99%). Linear and branched esters were formed, but the long-chain linear alcohols resulted in higher yields, such as n-butyl furoate in 94% yield.

Copper on the inner surface of mesoporous TiO2 hollow spheres: a highly selective photocatalyst for partial oxidation of methanol to methyl formate

To raise the methyl formate (MF) selectivity at high methanol conversion is one of the most challenging topics for photocatalytic partial oxidation of methanol to MF.

Surface Probing by Spectroscopy on Titania-Supported Gold Nanoparticles for a Photoreductive Application

The continuous increase in scientific reports concerning photocatalysis and in particular CO2 photoreduction in recent years reveals the high degree of interest around the topic. However, the adsorption and activation mechanisms of CO2 on TiO2, the most used photocatalyst, are poorly understood and investigated. Gold nanoparticles were prepared by a modified deposition-precipitation method using urea and a chemical reductant. Bare P25 was used as reference. Combined spectroscopic investigations of fresh and spent samples with photoactivity studies reported in this article provide new insights to the role of CO2 adsorption and carbonate formation on Au/TiO2 during CO2 photocatalytic reduction. The key intermediates’ and products’ adsorption (CO, methanol, ethanol) was studied, coupled with X-ray photoelectron microscopy (XPS) and UV-Visible spectroscopy. The adsorption of CO2 on fresh and spent catalysts changes radically considering the carbonate formation and the gold surface presence. Methanol and ethanol revealed new adsorbed species on Au with respect to bare titania. The characterisation of the spent catalysts revealed the good stability of these samples.

Surface chemistry of methanol on different ZnO surfaces studied by vibrational spectroscopy

The adsorption and reactions of CH₃OH on nonpolar mixed-terminated ZnO(101[combining macron]0), polar O-ZnO(0001[combining macron]) and Zn-ZnO(0001) surfaces have been studied systematically using high-resolution electron energy loss spectroscopy (HREELS) in conjunction with temperature programmed desorption (TPD). For all three ZnO surfaces, exposure to methanol at room temperature leads to (partially) dissociative adsorption resulting in the formation of hydroxyl and methoxy species. Upon heating to higher temperatures, the dissociated and intact methanol species on ZnO(101[combining macron]0) predominantly undergo molecular desorption releasing CH₃OH at 370 and 440 K. The Zn-O dimer vacancies are responsible for the decomposition of a small fraction of methanol yielding H₂, CH₂O and CO at 540 and 565 K. The interaction of methanol with polar O-ZnO and Zn-ZnO surfaces is dominated by thermal decomposition of CH₃OH to produce CH₂O, H₂, CO, CO₂ and H₂O at elevated temperatures. The high chemical reactivity of both polar surfaces is related to the high abundance of different types of surface defects formed via massive restructuring. Importantly, the reconstructed Zn-ZnO surface exhibits high selectivity for hydrogen production at 520 K, which was not observed for the polar O-ZnO surface. The HREELS data revealed that this low-temperature hydrogen evolution on Zn-ZnO results from methoxy oxidation to a formate species occurring at O-terminated step-edge sites.

Effect of the metal–support interaction on the activity and selectivity of methanol oxidation over Au supported on mesoporous oxides

To elucidate the factors affecting the catalytic properties of supported Au catalysts on the metal oxide support we investigated Au NPs deposited on crystallized mesoporous transition-metal oxides (m-oxides: Co₃O₄, NiO, and α-Fe₂O₃) prepared using the nanocasting method.

Toward a Comprehensive Understanding of Enhanced Photocatalytic Activity of the Bimetallic PdAu/TiO2 Catalyst for Selective Oxidation of Methanol to Methyl Formate

Photocatalytic selective oxidation of alcohols over titania supported with bimetallic nanoparticles represents an energy efficient and sustainable route for the synthesis of esters. Specifically, the bimetallic PdAu/TiO₂ system was found to be highly active and selective toward photocatalytic production of methyl formate (MF) from gas-phase methanol. In the current paper, we applied the electronic structure density functional theory method to understand the mechanistic aspects and corroborate our recent experimental measurements for the photocatalytic selective oxidation of methanol to MF over the PdAu/TiO₂ catalyst. Our theoretical results revealed the preferential segregation of Pd atoms from initially mixed PdAu nanoclusters to the interface of PdAu/TiO₂ and subsequent formation of a unique structure, resembling a core@shell architecture in close proximity to the interface. The analysis of the calculated band gap diagram provides an explanation of the superior electron-hole separation capability of PdAu nanoparticles deposited onto the anatase surface and hence the remarkably enhanced photocatalytic activity, in comparison to their monometallic counterparts. We demonstrated that facile dissociation of molecular oxygen at the triple-point boundary site gives rise to in situ oxidation of Pd. The in situ formed PdO/TiO₂ is responsible for total oxidation of methanol to CO₂ (no MF formation) in the gas phase. Our investigation provides theoretical guidance for designing highly selective and active bimetallic nanoparticles-TiO₂ catalysts for the photocatalytic selective oxidation of methanol to MF.

Dynamic restructuring drives catalytic activity on nanoporous gold-silver alloy catalysts

Bimetallic, nanostructured materials hold promise for improving catalyst activity and selectivity, yet little is known about the dynamic compositional and structural changes that these systems undergo during pretreatment that leads to efficient catalyst function. Here we use ozone-activated silver-gold alloys in the form of nanoporous gold as a case study to demonstrate the dynamic behaviour of bimetallic systems during activation to produce a functioning catalyst. We show that it is these dynamic changes that give rise to the observed catalytic activity. Advanced in situ electron microscopy and X-ray photoelectron spectroscopy are used to demonstrate that major restructuring and compositional changes occur along the path to catalytic function for selective alcohol oxidation. Transient kinetic measurements correlate the restructuring to three types of oxygen on the surface. The direct influence of changes in surface silver concentration and restructuring at the nanoscale on oxidation activity is demonstrated. Our results demonstrate that characterization of these dynamic changes is necessary to unlock the full potential of bimetallic catalytic materials.

IR spectroscopic investigations of chemical and photochemical reactions on metal oxides: bridging the materials gap

In this review, we highlight recent progress (2008–2016) in infrared reflection absorption spectroscopy (IRRAS) studies on oxide powders achieved by using different types of metal oxide single crystals as reference systems.

The effects of the Mo–Sn contact interface on the oxidation reaction of dimethyl ether to methyl formate at a low reaction temperature

With increasing degrees of Mo–Sn interface contact, the molar ratio of methyl formate (MF) to methanol (MeOH) and formaldehyde (FA) was found to linearly increase simultaneously.

Effects of tetrahedral molybdenum oxide species and MoOx domains on the selective oxidation of dimethyl ether under mild conditions

A new preparation method for MoO₃–SnO₂ catalysts precipitated by HNO₃ was developed to selectively synthesize industrially useful chemicals formaldehyde and methyl formate via oxidation of dimethyl ether.

A novel Cu–Mn/Ca–Zr catalyst for the synthesis of methyl formate from syngas

A novel catalyst comprised of Cu–Mn mixed oxides and CaO–ZrO₂ solid base has contributed to a high-performance methyl formate (MF) synthesis from syngas in a slurry reactor.