Global pilot study of legacy and emerging persistent organic pollutants using sorbent-impregnated polyurethane foam disk passive air samplers

Dermal exposure assessment of formal e-waste dismantlers to flame retardants and plasticizers using passive sampling methodologies

The recycling of e-waste can lead to the release of organic chemicals when materials containing additives are subjected to dismantling and grinding. In this context, the exposure of workers from a Catalonian e-waste facility to flame retardants and plasticizers (including organophosphate esters (OPEs), polybrominated diphenyl ethers (PBDEs), novel brominated flame retardants (NBFRs) and dechloranes) was assessed using T-shirts and wristbands as passive samplers. The study area includes an area exclusively dedicated to cathodic ray-tube (CRT) TVs dismantling, and a grinding area where the rest of e-waste is ground. All the families of compounds were detected in both T-shirts and wristbands, with the highest concentration levels corresponding to OPEs, followed by PBDEs, NBFRs, and dechloranes. The CRT area presented higher concentration levels than the grinding area. The compounds with higher concentrations in T-shirts were 2-ethylhexyl diphenyl phosphate (EHDPP), diphenyl cresyl phosphate (DCP) and triphenyl phosphate (TPHP), and the total concentration of all groups ranged between 293 and 8324 ng/dm2-h (hour). In the case of the wristbands, the most abundant compounds were DCP, TPHP, and BDE-209, with total concentrations between 188 and 2248 ng/dm2-h. The two sampling methods appear to be complementary, as T-shirts collect coarser particles, while wristbands also capture volatile compounds. Based on normalized surface and time concentrations, the estimated daily intake (EDI) through dermal contact was calculated and carcinogenic and non-carcinogenic risks (CR and non-CR) associated with this activity assessed. The results show median CR 29 and 16 times below the threshold in CRT and grinding areas respectively. The non-CR medians were 2 and 3 times below the threshold, although in the CRT area one exceptional value surpassed the threshold, suggesting that risk can exist for some workers in the facility.

A review of sample collection and analytical methods for detecting per- and polyfluoroalkyl substances in indoor and outdoor air

Per- and polyfluoroalkyl substances (PFAS) are a unique class of chemicals synthesized to aid in industrial processes, fire-fighting products, and to benefit consumer products such as clothing, cosmetics, textiles, carpets, and coatings. The widespread use of PFAS and their strong carbon-fluorine bonds has led to their ubiquitous presence throughout the world. Airborne transport of PFAS throughout the atmosphere has also contributed to environmental pollution. Due to the potential environmental and human exposure concerns of some PFAS, research has extensively focused on water, soil, and organismal detection, but the presence of PFAS in the air has become an area of growing concern. Methods to measure polar PFAS in various matrices have been established, while the investigation of polar and nonpolar PFAS in air is still in its early development. This literature review aims to present the last two decades of research characterizing PFAS in outdoor and indoor air, focusing on active and passive air sampling and analytical methods. The PFAS classes targeted and detected in air samples include fluorotelomer alcohols (FTOHs), perfluoroalkane sulfonamides (FASAs), perfluoroalkane sulfonamido ethanols (FASEs), perfluorinated carboxylic acids (PFCAs), and perfluorinated sulfonic acids (PFSAs). Although the manufacturing of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) has been largely phased out, these two PFAS are still often detected in air samples. Additionally, recent estimates indicate that there are thousands of PFAS that are likely present in the air that are not currently monitored in air methods. Advances in air sampling methods are needed to fully characterize the atmospheric transport of PFAS.

Per- and polyfluoroalkyl substances and volatile methyl siloxanes in global air: Spatial and temporal trends

The study reports on the atmospheric concentrations of per- and polyfluoroalkyl substances (PFAS) and volatile methyl siloxanes (VMS) measured using sorbent-impregnated polyurethane foam disks (SIPs) passive air samplers. New results are reported for samples collected in 2017, which extends temporal trend information to the period 2009-2017, for 21 sites where SIPs have been deployed since 2009. Among neutral PFAS, fluorotelomer alcohols (FTOHs) had higher concentrations than perfluoroalkane sulfonamides (FOSAs) and perfluoroalkane sulfonamido ethanols (FOSEs) with levels of ND‒228, ND‒15.8, ND‒10.4 pg/m³, respectively. Among ionizable PFAS, the sum of perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs) in air were 0.128-781 and 6.85-124 pg/m³, respectively. Longer-chain i.e. C₉-C₁₄ PFAS, which are relevant to the recent proposal by Canada for a listing of long-chain (C₉-C₂₁) PFCAs to the Stockholm Convention, were also detected in the environment at all site categories including Arctic sites. Cyclic and linear VMS ranged between 1.34‒452 and 0.01-12.1 ng/m³, respectively, showing dominance in urban areas. Despite the wide range of levels observed across different site categories, geometric means of the PFAS and VMS groups were fairly similar when grouped according to the five United Nations regions. Variable temporal trends in air (2009-2017) were observed for both PFAS and VMS. PFOS, which has been listed in the Stockholm Convention since 2009, is still showing increasing tendencies at several sites, indicating constant input from direct and/or indirect sources. These new data inform international chemicals management for PFAS and VMS.

Graphical tools for the planning and interpretation of polyurethane foam based passive air sampling campaigns

Due to low cost and easy handling during sampling and extraction, passive air samplers (PASs) using polyurethane foam (PUF) as a sorbent have become the most commonly deployed PASs for semi-volatile organic compounds (SVOCs). However, depending on the scenario, PUF-PAS may not always be operating in the linear uptake phase, which implies the need to consider how temperature, wind speed, deployment length and chemical properties interact to determine the amount of a target chemical taken up and the fraction of a depuration compound (DC) being lost during deployment. Guidance is, therefore, necessary to quantitatively interpret curvi-linear uptake in the PUF-PAS and avoid selection of DCs unsuited to the deployment conditions. In this study, the PAS-SIM model is used to generate graphical tools that aid in addressing important questions frequently arising during the use of PUF-PASs. Specifically, we generated five charts that display (i) the inherent sampling rate as a function of wind speed and a chemical's molecular diffusivity, (ii) the length of the linear uptake period as a function of chemical properties, temperature and the acceptable deviation from linearity, (iii) the time to 95% equilibrium as influenced by chemical properties, temperature and wind speed, (iv) the dependence of the fractional loss of DCs on chemical properties, temperature, wind speed and deployment length, and (v) the influence of chemical properties, temperature and the total suspended particle concentration on the extent of sorption to atmospheric particles. The charts also facilitate the assessment of the influence of parameter uncertainty. It is hoped that these charts assist with planning and interpreting sampling campaigns based on a mechanistic and quantitative understanding of uptake in PUF-based PASs.

Confirmatory Analysis of Per and Polyfluoroalkyl Substances in Milk and Infant Formula Using UHPLC-MS/MS

An ultra-high performance liquid chromatography tandem mass spectrometry method was developed and validated for the sensitive determination and unambiguous confirmation of residues of per and polyfluorinated alkyl substances (PFAS) in breastmilk, retail milk and infant formulas following two sample preparation methods. Sample pre-treatment was carried out by a simplified QuEChERS method without requiring dSPE or any further clean-up. The method was validated in accordance with the requirements of Commission Decision 657/2002/EC with slight modifications. The method displayed good linearity with R² ranging from 0.9843–0.9998 for all target PFAS. The recovery and within-laboratory reproducibility of the method (n = 63) were in the range 60–121% and 5–28%, respectively. The decision limit, detection capability and limit of quantitation ranged from 30–60 ng kg⁻¹ to 40–100 ng kg⁻¹ and 5–50 ng kg⁻¹, respectively. Acceptable matrix effect values in the range −45–29% were obtained with uncertainty of measurement lower than 25% for all target PFAS. The method displays its suitability for the sensitive and high-throughput confirmatory analysis of C₄–C₁₄ PFAS in breastmilk, dairy milk and infant formulas.

Partitioning between polyurethane foam and the gas phase: data compilation, uncertainty estimation and implications for air sampling

Polyurethane foam (PUF) is frequently applied for sampling semi-volatile organic compounds (SVOCs) in the gas phase. Equilibrium partition coefficients (KPUF/G) often are used to estimate the potential for breakthrough during active air sampling (AAS) and to correct for non-linear uptake during passive air sampling (PAS). KPUF/G is either determined experimentally or estimated, in both cases incurring uncertainties that can be carried over to other parameters. Here, a dataset of 547 measured KPUF/G values and chemical information for 281 distinct chemicals was compiled from the peer reviewed literature. Measured log KPUF/G were compared with predicted values to identify potential bias in data generated with a particular experimental approach. An analysis of the measured data suggests that the uncertainty of unbiased log KPUF/G values is at best 0.2 log units at 15 °C (e.g. for hexachlorobenzene and fluoranthene), but most likely much higher. This implies that inherent passive air sampling rates obtained from the loss of a depuration compound (SR) and breakthrough volumes during AAS can presently not be known with an uncertainty of less than ca. 50%. During short PAS deployment periods, the uncertainty in the effective sampling volume (Vair) derives mainly from the uncertainty in the SR, whereas the uncertainty in KPUF/G of the target compound will become important and even the main source of uncertainty for Vair if deployments are long or target chemicals are relatively volatile. This in turn implies that the uncertainty of Vair cannot be smaller than the uncertainty of SR and KPUF/G and therefore again is at least ca. 50%. We strongly recommend that the uncertainty of air concentrations obtained by non-linear PAS is quantified and reported and we outline a procedure on how to do that. Because the uncertainty in KPUF/G of target and depuration chemicals generally exceeds 30%, it may often be necessary to conduct Monte Carlo simulation.

Mobility and environmental monitoring of pesticides in the atmosphere - a review

Knowledge of the partition mechanisms in the agrochemical environment is fundamental for understanding their behavior within an ecosystem and mitigating possible adverse effects of these products. In this review, the objective was to present the main transport mechanisms, physical-chemical properties, and atmospheric monitoring methodologies of the most diverse types of agrochemicals used in agriculture that can reach the atmosphere and affect different compartments. It has been verified that volatilization is one of more considerable significance of the various forms of transport since a significant part of the applied pesticides can volatilize in a few days. As for monitoring these compounds in the atmosphere, both passive and active sampling have their advantages and disadvantages. Passive samplers allow sampling in large quantities and at remote locations, in addition to making continuous measurements, while active samplers have the advantage of being able to detect low concentrations and continuously. Since a significant portion of the applied pesticides is directed to the atmosphere, monitoring makes it possible to understand some properties of the pesticides present in the air. This monitoring can be done from different existing methodologies based on adopted criteria and existing technical standards. Graphical representation of mobility and environmental monitoring of atmospheric pollutants from pesticides.

A review of organophosphate esters in indoor dust, air, hand wipes and silicone wristbands: Implications for human exposure

The ubiquity of organophosphate esters (OPEs) in various environmental matrices inevitably pose human exposure risks. Numerous studies have investigated human exposure pathways to OPEs, including air inhalation, dust ingestion, dermal contact, and dietary and drinking water intake, and have indicated that indoor dust and indoor air routes are frequently the two main human exposure pathways. This article reviews the literature on OPE contamination in indoor air and dust from various microenvironments and on OPE particle size distributions and bioavailability in dust conducted over the past 10 years. Ways in which sampling strategies are related to the uncertainty of exposure assessment results and comparability among different studies in terms of sampling tools, sampling sites, and sample types are addressed. Also, the associations of OPEs in indoor dust/air with human biological samples were summarized. Studies on two emerging matrices, hand wipes and silicone wristbands, are demonstrated to be more comprehensive and accurate in reflecting personal human exposure to OPEs in microenvironments and are summarized. Given the direct application of some diester OPEs (di-OPEs) in numerous products, research on their existence in indoor dust and food and on their effects on human urine are also discussed. Finally, related research trends and avenues for future research are prospected.

Review on perfluoroalkyl and polyfluoroalkyl substances (PFASs) in the Chinese atmospheric environment

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been manufactured and used for over 50 years, and now are worldwide distributed in the environment. The atmospheric environment is the main compartment for PFASs to be transported and transformed, and relevant research has highlighted the global occurrence and impacts of atmospheric PFASs in ecosystems and human health. With the phasing-out and restriction of eight‑carbon chain-length (C8) PFASs in developed countries, China has become the largest producer of C8 PFASs since 2004. Subsequently, a number of studies on PFASs in the Chinese atmospheric environment have been conducted in the recent decade. This review documented twenty-eight studies on PFASs in Chinese outdoor air published to date. Methods of sampling, extraction, cleanup, and instrumental analysis were summarized for both ionic and neutral PFASs. Levels, compositions, and spatial distribution of PFASs from different areas in China (i.e. source, urban, and remote regions, and north versus south China) were compared and discussed. Leaves and tree barks were proposed as effective bioindicators to reflect the contamination status of atmospheric PFASs. Special attention can be given to non-target screening for future research directions.

Passive air sampling for semi-volatile organic chemicals

During passive air sampling, the amount of a chemical taken up in a sorbent from the air without the help of a pump is quantified and converted into an air concentration. In an equilibrium sampler, this conversion requires a thermodynamic parameter, the equilibrium sorption coefficient between gas-phase and sorbent. In a kinetic sampler, a time-averaged air concentration is obtained using a sampling rate, which is a kinetic parameter. Design requirements for kinetic and equilibrium sampling conflict with each other. The volatility of semi-volatile organic compounds (SVOCs) varies over five orders of magnitude, which implies that passive air samplers are inevitably kinetic samplers for less volatile SVOCs and equilibrium samplers for more volatile SVOCs. Therefore, most currently used passive sampler designs for SVOCs are a compromise that requires the consideration of both a thermodynamic and a kinetic parameter. Their quantitative interpretation depends on assumptions that are rarely fulfilled, and on input parameters, that are often only known with high uncertainty. Kinetic passive air sampling for SVOCs is also challenging because their typically very low atmospheric concentrations necessitate relatively high sampling rates that can only be achieved without the use of diffusive barriers. This in turn renders sampling rates dependent on wind conditions and therefore highly variable. Despite the overall high uncertainty arising from these challenges, passive air samplers for SVOCs have valuable roles to play in recording (i) spatial concentration variability at scales ranging from a few centimeters to tens of thousands of kilometers, (ii) long-term trends, (iii) air contamination in remote and inaccessible locations and (iv) indoor inhalation exposure. Going forward, thermal desorption of sorbents may lower the detection limits for some SVOCs to an extent that the use of diffusive barriers in the kinetic sampling of SVOCs becomes feasible, which is a prerequisite to decreasing the uncertainty of sampling rates. If the thermally stable sorbent additionally has a high sorptive capacity, it may be possible to design true kinetic samplers for most SVOCs. In the meantime, the passive air sampling community would benefit from being more transparent by rigorously quantifying and explicitly reporting uncertainty.

Emerging and legacy per- and polyfluoroalkyl substances in water, sediment, and air of the Bohai Sea and its surrounding rivers

Per- and polyfluoroalkyl substances (PFASs) contamination in the Bohai Sea and its surrounding rivers has attracted considerable attention in recent years. However, few studies have been conducted regarding the distribution of PFASs in multiple environmental media and their distributions between the suspended particles and dissolved phases. In this study, surface water, surface sediment, and air samples were collected at the Bohai Sea to investigate the concentration and distribution of 39 targeted PFASs. Moreover, river water samples from 35 river estuaries were collected to estimate PFAS discharge fluxes to the Bohai Sea. The results showed that total ionic compound (Σi-PFASs) concentrations ranged from 19.3 to 967 ng/L (mean 125 ± 152 ng/L) in the water and 0.70-4.13 ng/g dw (1.78 ± 0.76 ng/g) in surface sediment of the Bohai Sea, respectively. In the estuaries, Σi-PFAS concentrations were ranged from 10.5 to 13500 ng/L (882 ± 2410 ng/L). In the air, ΣPFAS (Σi-PFASs + Σn-PFASs) concentrations ranged from 199 to 678 pg/m³ (462 ± 166 pg/m³). Perfluorooctanoic acid (PFOA) was the predominant compound in the seawater, sediment, and river water; in the air, 8:2 fluorotelomer alcohol was predominant. Xiaoqing River discharged the largest Σi-PFAS flux to the Bohai Sea, which was estimated as 12,100 kg/y. Some alternatives, i.e., 6:2 fluorotelomer sulfonate acid (6:2 FTSA), hexafluoropropylene oxide dimer acid (HFPO-DA), and chlorinated 6:2 polyfluorinated ether sulfonic acid (Cl-6:2 PFESA), showed higher levels than or comparable concentrations to those of the C8 legacy PFASs in some sampling sites. The particle-derived distribution coefficient in seawater was higher than that in the river water. Using high resolution mass spectrometry, 29 nontarget emerging PFASs were found in 3 river water and 3 seawater samples. Further studies should be conducted to clarify the sources and ecotoxicological effects of these emerging PFASs in the Bohai Sea area.

Measuring exposure of e-waste dismantlers in Dhaka Bangladesh to organophosphate esters and halogenated flame retardants using silicone wristbands and T-shirts

Silicone (polydimethylsiloxane or PDMS) wristbands and cotton T-shirts were used to assess the exposure of e-waste recyclers in Dhaka, Bangladesh to polybrominated diphenyl ethers (PBDEs), novel brominated flame retardants (NBFRs), dechlorane plus (DPs), and organophosphate esters (OPEs). The median surface-normalized uptake rates of PBDEs, NBFRs, DPs, and OPEs were 170, 8.5, 4.8, and 270 ng/dm²/h for wristbands and 5.4, 2.0, 0.94, and 23 ng/dm²/h for T-shirts, respectively. Concentrations of Tris(2-chloroethyl) phosphate (TCEP), Tris(1,3-dichloro-2-propyl) phosphate (TDCIPP), Tri-m-cresyl phosphate (TmCP), Bis(2-ethlyhexyl) tetrabromophthalate (BEH-TEBP), and Dechlorane plus (DPs) in wristbands were significantly correlated with those in T-shirts. Wristbands accumulated ~7 times more mass than T-shirts, especially of compounds expected to be mainly in the gas phase. We introduce the silicone "sandwich" method to approximate the easily releasable fraction (ERF) from T-shirts, hypothesized to be related to dermal exposure. ERFs varied from 6 to 75% of total chemical accumulated by T-shirts and were significantly negatively correlated with compounds' octanol-air partition coefficient (log K_oa). The median daily exposure doses via dermal transfer from the front of the T-shirt to the front body trunk were 0.32, 0.13, 0.11, and 9.1 ng/kg-BW/day for PBDEs, NBFRs, DPs, and OPEs, respectively. The evidence of e-waste recycler exposure to flame retardants in this low income country, lacking protective personal equipment, calls for measures to minimize their exposure and for chemical management regulations to consider exposures to chemicals in waste products.

Atmospheric Research Over the Western North Atlantic Ocean Region and North American East Coast: A Review of Past Work and Challenges Ahead

Decades of atmospheric research have focused on the Western North Atlantic Ocean (WNAO) region because of its unique location that offers accessibility for airborne and ship measurements, gradients in important atmospheric parameters, and a range of meteorological regimes leading to diverse conditions that are poorly understood. This work reviews these scientific investigations for the WNAO region, including the East Coast of North America and the island of Bermuda. Over 50 field campaigns and long-term monitoring programs, in addition to 715 peer-reviewed publications between 1946 and 2019 have provided a firm foundation of knowledge for these areas. Of particular importance in this region has been extensive work at the island of Bermuda that is host to important time series records of oceanic and atmospheric variables. Our review categorizes WNAO atmospheric research into eight major categories, with some studies fitting into multiple categories (relative %): Aerosols (25%), Gases (24%), Development/Validation of Techniques, Models, and Retrievals (18%), Meteorology and Transport (9%), Air-Sea Interactions (8%), Clouds/Storms (8%), Atmospheric Deposition (7%), and Aerosol-Cloud Interactions (2%). Recommendations for future research are provided in the categories highlighted above.

Spatial and temporal variability of perfluoroalkyl substances in the Laurentian Great Lakes

Per- and polyfluoroalkyl substances (PFAS) are a diverse group of fluorinated organic chemicals that have been used in industrial and consumer applications since the 1950s. PFAS are resistant to chemical and biological degradation and are ubiquitous in the environment, including in water, sediment, and biota in the Laurentian Great Lakes. This critical review evaluates the spatial and temporal variability of commonly studied perfluoroalkyl sulfonates (PFSAs) and perfluoroalkyl carboxylates (PFCAs) in the Great Lakes by synthesizing data collected in water, surface sediment, sediment cores, lake trout (Salvelinus namaycush), and herring gull (Larus argentatus) eggs. The lowest PFAS concentrations in all matrices are detected in Lake Superior, which is located in the most pristine region of the Great Lakes Basin. In contrast, higher concentrations are observed in Lakes Erie and Ontario, which are more impacted by industrial activity and wastewater discharge. The distribution of individual PFAS compounds also varies across the lakes in response to changes in PFAS sources, with higher proportions of PFSAs in the eastern lakes. Sediment and biota are enriched in long chain PFSAs and PFCAs relative to concentrations in the water column, as expected based on predicted partitioning behavior. Sediment cores and bioarchives consistently demonstrate that PFAS concentrations increased in the Great Lakes from the initial time points until the early 2000s. The available data indicate that PFOS and PFOA concentrations decline after this period in the upper Great Lakes, but are stable in Lake Ontario. However, these trends depend on the lake, the individual compound, and the organism considered.

Theory and modelling approaches to passive sampling

Designs and applications of passive samplers for various environmental compartments have been broadened significantly since their introduction. Understanding the theory behind passive sampling is essential for proper development of sampling methods and for accurate interpretation of the results. Theoretical underpinnings of passive sampling have been explored using different approaches. The aim of this review is to describe passive sampling theory and modelling approaches presented in the literature in a manner that allows researchers to obtain comprehensive understanding of them and to recognize the assumptions behind each approach together with their applicability to a given passive sampling technique. A common approach originates from Whitman's two-film theory and produces an exponential model that describes the entire passive sampling process. This approach, however, is based on several assumptions including linear exchange kinetics between the sampled medium and the passive sampler. Two-phase air passive samplers with a well-defined barrier are commonly modeled based on the zero-sink assumption, which assumes efficient trapping of analytes in the receiving phase. This assumption may become invalid under various scenarios; consequently, other approaches to modelling have been introduced including simulation of the sampling process by approximate temporal-steady states in hypothetical segments in the adsorption phase. Another approach uses dynamic models to determine accumulation of analytes in passive samplers. Dynamic models are capable of describing mass accumulation in the passive sampler, its transient response, and its response to fluctuations in environmental concentrations. Finally, empirically calibrated models, attempting to simplify the process of passive sampling rate determination, are also presented. In general, dynamic models are used to establish a profound understanding of the sampling process and analyse the applicability of the simpler models and their assumptions, while the simplified models are desirable and practical for most users. Nonetheless, due to the advancement in the computational tools, application of the dynamic models could be made simple and user-friendly.

Legacy and current-use pesticides (CUPs) in the atmosphere of a rural area in central Chile, using passive air samplers

Polyurethane foam (PUF) disks in passive air samplers (PAS) and passive dry deposition (Pas-DD) collectors were used to assess the presence of persistent organic pollutants (POPs) and current-use pesticides (CUPs) in a rural area of central Chile (Peumo, VI Region). The samplers were exposed from September 2015 (spring) to March 2016 (summer), with the PUFs collected at intervals of 30, 60, and 90 days. Both samplers (PUF-PAS and Pas-DD) captured more than one pesticide per sampling period. Chlorpyrifos-ethyl and pyrimethanil presented the highest air concentration with PUF-PAS (3470.2 ng m^-3 for chlorpyrifos-ethyl and 52.8 ng m^-3 for pyrimethanil). The deposited amount of chlorpyrifos-ethyl, pyrimethanil, penconazole, diazinon and malathion in some Pas-DD, was superior to amount of pesticides captured by PUF-PAS. Differences between the amount deposited and captured by each sampler should be studied in greater detail, because wind speed, atmospheric particulate matter size and sampler design are some fundamental variables in this process. These results provide preliminary information on the presence of current-use pesticides in the atmosphere of Peumo, VI Region, serving as a foundation for future environmental monitoring programs.

Urban sources of synthetic musk compounds to the environment

The occurrence and potential sources of synthetic musk compounds (SMCs) in the urban and surrounding environment were investigated. We analyzed air, soils and surface waters from a wide array of land-use types and urban densities including air from wastewater treatment plants (WWTPs), indoor, urban, rural, and remote Arctic sites; surface waters from urban and rural tributaries; and effluents of three WWTPs. In air, the median sum concentration of six selected polycyclic musks (Σ6PCMs) (i.e., galaxolide, tonalide, cashmeran, celestolide, phantolide, traseolide) were the highest from WWTP on-site > indoor > urban > WWTP off-site > rural. SMCs were not found in remote Arctic air indicating low potential for long-range atmospheric transport. SMCs were not found in soils, likely because of their high volatility and fast biodegradation rate. Galaxolide (HHCB) and tonalide (AHTN) were the two most abundant SMCs in air, tributaries and WWTP effluents. Σ6PCM concentrations in air taken along urban-rural transects and in tributary water were positively correlated with population density. In WWTP on-site air, trace levels of the toxic nitro-musks, namely musk xylene and musk ketone were detected and macrocyclic musks accounted for ∼10% of the total SMCs measured. In WWTP effluents, the concentrations of Σ6PCMs were proportional to the population served. We conclude that sources of SMCs to the outdoor urban environment and hence the surrounding region, originate from releases from indoor air, and temperature-dependent volatilization from WWTPs during treatment.

Field-testing polyethylene passive samplers for the detection of neutral polyfluorinated alkyl substances in air and water

Fluorotelomer alcohols (FTOHs), perfluorooctane-sulfonamidoethanols (FOSEs), perfluorooctane-sulfonamides (FOSAs), and other poly- and perfluorinated alkyl substances (PFASs) are common and ubiquitous byproducts of industrial telomerization processes. They can degrade into various perfluorinated carboxylic acids, which are persistent organic contaminants of concern. We assessed the use of polyethylene (PE) passive samplers as a sampling tool for neutral PFAS precursors during field-deployments in air and water. A wide range of neutral PFASs was detected in polyethylene sheets exposed in wastewater treatment effluents in August 2017. Equilibration times for most neutral PFASs were on the order of 1 to 2 wk. Based on known sampling rates, the partitioning constants between polyethylene and water, K_PEw , were derived. Log K_PEw values were mostly in the range of 3 to 4.5, with the greatest values for 8:2 FTOH, 10:2 FTOH, and n-ethyl-FOSE. To test the utility of polyethylene for gas-phase compounds, parallel active and passive sampling was performed in ambient air in Providence (RI, USA) in April 2016. Most PFASs equilibrated within 2 to 7 d. The greatest concentrations in polyethylene samplers were detected for MeFOSE and EtFOSE. Polyethylene/air partitioning constants, log K_PEa , were approximately 7 to 8 for the FTOHs, and approached 9 for n-methyl-FOSA and n-methyl-FOSE. Polyethylene sheets showed promise as a passive sampling approach for neutral PFASs in air and water. Environ Toxicol Chem 2018;37:3002-3010. © 2018 SETAC.

Air contamination by legacy and current-use pesticides in Brazilian mountains: An overview of national regulations by monitoring pollutant presence in pristine areas

In the last decades, research regarding the dynamics of pesticides has grown, even in remote regions. Due to long-range atmospheric transport, environmental persistence and toxicological potential of organochlorine pesticides (OCPs), similar characteristics of current-use pesticides (CUPs) and their massive use in Brazil, these contaminants have become a major concern for environmental and human life. Thus, this study aimed to evaluate subgroups or individual chemicals of OCPs and CUPs, which could have travelled over two Conservation Unit sites in the Rio de Janeiro state. The study was carried out for 24 months, (2013-2015), in Itatiaia National Park (INP) and in the Serra dos Órgãos National Park (SONP), at ∼2400 and ∼2200 meters above sea level, respectively. The study was based on atmospheric passive sampling (polyurethane foam disks). Target pesticides were detected by means of gas chromatography device coupled with mass spectrometry (GC-MS). Significantly higher concentrations were measured in SONP when compared to INP. However, in broad terms, the contamination profile was quite similar for both national parks: The highest concentrations of endosulfan (INP - 1275 pg m^-3 and SONP - 3202 pg m^-3) were followed by cypermethrin (INP - 148 pg m^-3 and SONP - 881 pg m^-3) and chlorpyrifos (INP - 67 pg m^-3 and SONP - 270 pg m^-3). In agreement with previous studies, the atmospheric concentrations of legacy OCPs showed background air levels. The decrease of endosulfan over the years was highlighted with a parallel increase of chlorpyrifos, suggesting a collateral effect of the national bias of permissive and massive use of agrochemicals. CUPs seemed to behave like pseudo-persistent pollutants (pseudo-POPs). This is the first report of atmospheric concentrations of pyrethroids in Brazilian mountain regions, and possibly the first to investigate them in the air in South America or in any mountain region in the world.

Atmospheric Concentrations of New Persistent Organic Pollutants and Emerging Chemicals of Concern in the Group of Latin America and Caribbean (GRULAC) Region

A special initiative was run by the Global Atmospheric Passive Sampling (GAPS) Network to provide atmospheric data on a range of emerging chemicals of concern and candidate and new persistent organic pollutants in the Group of Latin America and Caribbean (GRULAC) region. Regional-scale data for a range of flame retardants (FRs) including polybrominated diphenyl ethers (PBDEs), organophosphate esters (OPEs), and a range of alternative FRs (novel FRs) are reported over 2 years of sampling with low detection frequencies of the novel FRs. Atmospheric concentrations of the OPEs were an order of magnitude higher than all other FRs, with similar profiles at all sites. Regional-scale background concentrations of the poly- and perfluoroalkyl substances (PFAS), including the neutral PFAS (n-PFAS) and perfluoroalkyl acids (PFAAs), and the volatile methyl siloxanes (VMS) are also reported. Ethyl perfluorooctane sulfonamide (EtFOSA) was detected at highly elevated concentrations in Brazil and Colombia, in line with the use of the pesticide sulfluramid in this region. Similar concentrations of the perfluoroalkyl sulfonates (PFAS) were detected throughout the GRULAC region regardless of location type, and the VMS concentrations in air increased with the population density of sampling locations. This is the first report of atmospheric concentrations of the PFAAs and VMS from this region.

Atmospheric concentrations and trends of poly- and perfluoroalkyl substances (PFAS) and volatile methyl siloxanes (VMS) over 7 years of sampling in the Global Atmospheric Passive Sampling (GAPS) network

Poly- and per-fluoroalkyl substances (PFAS) and volatile methyl siloxanes (VMS) were monitored at 21 sites in the Global Atmospheric Passive Sampling (GAPS) Network. Atmospheric concentrations previously reported from 2009 were compared to concentrations measured at these sites in 2013 and 2015, to assess trends over 7 years of monitoring. Concentrations of the fluorotelomer alcohols (FTOHs) and fluorinated sulfonamides and sulfonamidoethanols (FOSAs and FOSEs) were stable at these sites from 2009 to 2015 with no significant difference (p > 0.05) in concentrations. Elevated concentrations of all the neutral PFAS were detected at the urban sites as compared to the polar/background sites. The perfluorosulfonic acids (PFSAs), meanwhile, saw a significant increase (p < 0.001) in concentrations from 2009 to 2015. The perfluorocarboxylic acids (PFCAs) had elevated concentrations in 2015, however, the difference was not statistically significant (p > 0.05). Concentrations of the PFSAs and the PFCAs were similar at all location types, showing the global reach of these persistent compounds. Concentrations of the cyclic VMS (cVMS) were at least an order of magnitude higher than the linear VMS (lVMS) and the PFAS. Octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) saw a weak significant increase in concentrations from 2009 to 2013 (p < 0.05), however, hexamethylcyclotrisiloxane (D3) had a strong significant decrease in concentrations from 2009 to 2015 (p < 0.01).

Airborne polycyclic aromatic compounds contribute to the induction of the tumour-suppressing P53 pathway in wild double-crested cormorants

Polycyclic aromatic compounds (PACs), including polycyclic aromatic hydrocarbons (PAHs) and PAH-like compounds are known or probable environmental carcinogens released into the environment as a by-product of incomplete combustion of fossil fuels and other organic materials. Studies have shown that exposure to PACs in the environment can induce both genotoxicity and epigenetic toxicity, but few studies have related PAC exposure to molecular changes in free ranging wildlife. Previous work has suggested that double-crested cormorants (Phalacrocorax auritus; DCCO) exhibited a higher incidence of genetic mutations when their breeding sites were located in heavily industrialized areas (e.g., Hamilton Harbour, Hamilton, ON, Canada) as compared to sites located in more pristine environments, such as in Lake Erie. The aim of this study was to determine if airborne PACs from Hamilton Harbour alter the tumour-suppressing P53 pathway and/or global DNA methylation in DCCOs. Airborne PACs were measured using passive air samplers in the Hamilton Harbour area and low-resolution mass spectrometry analysis detected PACs in livers of DCCOs living in Hamilton Harbour. Further hepatic and lung transcriptional analysis demonstrated that the expression of the genes involved in the DNA repair and cellular apoptosis pathway were up-regulated in both tissues of DCCOs exposed to PACs, while genes involved in p53 regulation were down-regulated. However, global methylation levels did not differ between reference- and PAC-exposed DCCOs. Altogether, data suggest that PACs activate the P53 pathway in free-ranging DCCOs living nearby PAC-contaminated areas.

Risk exposure assessment of per- and polyfluoroalkyl substances (PFASs) in drinking water and atmosphere in central eastern China

We examined per- and polyfluoroalkyl substances (PFASs) in air from eight cities, and in water from six drinking-water treatment plants (DWTPs), in central eastern China. We analyzed raw and treated water samples from the DWTPs for 17 ionic PFASs with high-performance liquid chromatography/negative-electrospray-ionization tandem mass spectrometry (HPLC/(-)ESI-MS/MS), and analyzed the gas and particle phases of atmospheric samples for 12 neutral PFASs by gas chromatography-mass spectrometry (GC-MS). Perfluorooctanoic acid (PFOA) and perfluorohexanoic acid (PFHxA) were the dominant compounds in drinking water, and fluorotelomer alcohols (FTOHs) dominated in atmospheric samples. Of all the compounds in the treated water samples, the concentration of PFOA, at 51.0 ng L^-1, was the highest. Conventional treatments such as coagulation (COA), flocculation (FOC), sedimentation (SED), and sand filtration (SAF) did not remove PFASs. Advanced treatments, however, including ultrafiltration (UF) and activated carbon (AC), removed the majority of PFASs except for shorter-chain PFASs such as perfluorobutanoic acid (PFBA) and perfluoropentanoic acid (PFPA). We also investigated human exposure to PFASs via drinking water and the atmosphere and found that the mean daily intake of PFASs was 0.43 ng kg^-1 day^-1.

Breakthrough during air sampling with polyurethane foam: What do PUF 2/PUF 1 ratios mean?

Frontal chromatography theory is applied to describe movement of gaseous semivolatile organic compounds (SVOCs) through a column of polyurethane foam (PUF). Collected mass fractions (F_C) are predicted for sample volume/breakthrough volume ratios (τ = V_S/V_B) up to 6.0 and PUF bed theoretical plate numbers (N) from 2 to 16. The predictions assume constant air concentrations and temperatures. Extension of the calculations is done to relate the collection efficiency of a 2-PUF train (F_C1+2) to the PUF 2/PUF 1 ratio. F_C1+2 exceeds 0.9 for PUF 2/PUF 1 ≤ 0.5 and lengths of PUF commonly used in air samplers. As the PUF 2/PUF 1 ratio approaches unity, confidence in these predictions is limited by the analytical ability to distinguish residues on the two PUFs. Field data should not be arbitrarily discarded because some analytes broke through to the backup PUF trap. The fractional collection efficiencies can be used to estimate air concentrations from quantities retained on the PUF trap when sampling is not quantitative.

Calibration and evaluation of PUF-PAS sampling rates across the Global Atmospheric Passive Sampling (GAPS) network

Passive air samplers equipped with polyurethane foam (PUF-PAS) are frequently used to measure persistent organic pollutants (POPs) in ambient air. Here we present and evaluate a method to determine sampling rates (R_S), and the effective sampling volume (V_eff), for gas-phase chemical compounds captured by a PUF-PAS sampler deployed anywhere in the world. The method uses a mathematical model that requires only publicly available hourly meteorological data, physical-chemical properties of the target compound, and the deployment dates. The predicted R_S is calibrated from sampling rates determined from 5 depuration compounds (¹³C PCB-9, ¹³C PCB-15, ¹³C PCB-32, PCB-30, and d₆-γ-HCH) injected in 82 samples from 24 sites deployed by the Global Atmospheric Passive Sampling (GAPS) network around the world. The dimensionless fitting parameter, gamma, was found to be constant at 0.267 when implementing the Integrated Surface Database (ISD) weather observations and 0.315 using the Modern Era Retrospective-Analysis for Research and Applications (MERRA) weather dataset. The model provided acceptable agreement between modelled and depuration determined sampling rates, with ¹³C PCB-9, ¹³C PCB-32, and d₆-γ-HCH having mean percent bias near zero (±6%) for both weather datasets (ISD and MERRA). The model provides inexpensive and reliable PUF-PAS gas-phase R_S and V_eff when depuration compounds produce unusual or suspect results and for sites where the use of depuration compounds is impractical, such as sites experiencing low average wind speeds, very cold temperatures, or remote locations.

Development of polyurethane-based passive samplers for ambient monitoring of urban-use insecticides in water

Widespread use of insecticides for the control of urban pests such as ants, termites, and spiders has resulted in contamination and toxicity in urban aquatic ecosystems in different regions of the world. Passive samplers are a convenient and integrative tool for in situ monitoring of trace contaminants in surface water. However, the performance of a passive sampler depends closely on its affinity for the target analytes, making passive samplers highly specific to the types of contaminants being monitored. The goal of this study was to develop a passive sampler compatible with a wide range of insecticides, including the strongly hydrophobic pyrethroids and the weakly hydrophobic fipronil and organophosphates. Of six candidate polymeric thin films, polyurethane film (PU) was identified to be the best at enriching the test compounds. The inclusion of stable isotope labeled analogs as performance reference compounds (PRCs) further allowed the use of PU film for pyrethroids under non-equilibrium conditions. The PU sampler was tested in a large aquarium with circulatory water flow, and also deployed at multiple sites in surface streams in southern California. The concentrations of pesticides derived from the PU sampler ranged from 0.5 to 18.5 ng/L, which were generally lower than the total chemical concentration measured by grab samples, suggesting that suspended particles and dissolved organic matter in water rendered them less available. The influence of suspended particles and dissolved organic matter on bioavailability was more pronounced for pyrethroids than for fipronils. The results show that the developed PU film sampler, when coupled with PRCs, may be used for rapid and sensitive in-situ monitoring of a wide range of insecticides in surface water.

Persistent organic pollutants (POPs) in the atmosphere of coastal areas of the Ross Sea, Antarctica: Indications for long-term downward trends

Passive air samplers were used to evaluate long-term trends and spatial distribution of trace organic compounds in Antarctica. Duplicate PUF disk samplers were deployed at six automatic weather stations in the coastal area of the Ross sea (East Antarctica), between December 2010 and January 2011, during the XXVI Italian Scientific Research Expedition. Among the investigated persistent organic compounds, Hexachlorobenzene was the most abundant, with air concentrations ranging from 0.8 to 50 pg m^-3. In general, the following decreasing concentration order was found for the air samples analyzed: HCB > PeCB > PCBs > DDTs > HCHs. While HCB concentrations were in the same range as those reported in the atmosphere of other Antarctic sampling areas and did not show a decline, HCHs and DDTs levels were lower or similar to those determined one or two decades ago. In general, the very low concentrations reflected the pristine state of the East Antarctica air. Backward trajectories indicated the prevalence of air masses coming from the Antarctic continent. Local contamination and volatilization from ice were suggested as potential sources for the presence of persistent organic pollutants in the atmosphere.

Measurement of polyurethane foam - air partition coefficients for semivolatile organic compounds as a function of temperature: Application to passive air sampler monitoring

Polyurethane foam - air partition coefficients (K_PUF-air) for 9 polycyclic aromatic hydrocarbons (PAHs), 10 alkyl-substituted PAHs, 4 organochlorine pesticides (OCPs) and dibenzothiophene were measured as a function of temperature over the range 5 °C-35 °C, using a generator column approach. Enthalpies of PUF-to-air transfer (ΔH_PUF-air, kJ/mol) were determined from the slopes of log K_PUF-air versus 1000/T (K), and have an average value of 81.2 ± 7.03 kJ/mol. The log K_PUF-air values at 22 °C ranged from 4.99 to 7.25. A relationship for log K_PUF-air versus log K_OA was shown to agree with a previous relationship based on only polychlorinated biphenyls (PCBs) and derived from long-term indoor uptake study experiments. The results also confirm that the existing K_OA-based model for predicting log K_PUF-air values is accurate. This new information is important in the derivation of uptake profiles and effective air sampling volumes for PUF disk samplers so that results can be reported in units of concentration in air.

Can the use of deactivated glass fibre filters eliminate sorption artefacts associated with active air sampling of perfluorooctanoic acid?

Experimental work was undertaken to test whether gaseous perfluorooctanoic acid (PFOA) sorbs to glass fibre filters (GFFs) during air sampling, causing an incorrect measure of the gas-particle equilibrium distribution. Furthermore, tests were performed to investigate whether deactivation by siliconisation prevents sorption of gaseous PFOA to filter materials. An apparatus was constructed to closely simulate a high-volume air sampler, although with additional features allowing introduction of gaseous test compounds into an air stream stripped from particles. The set-up enabled investigation of the sorption of gaseous test compounds to filter media, eliminating any contribution from particles. Experiments were performed under ambient outdoor air conditions at environmentally relevant analyte concentrations. The results demonstrate that gaseous PFOA sorbs to GFFs, but that breakthrough of gaseous PFOA on the GFFs occurs at trace-level loadings. This indicates that during high volume air sampling, filters do not quantitatively capture all the PFOA in the sampled air. Experiments with siliconised GFFs showed that this filter pre-treatment reduced the sorption of gaseous PFOA, but that sorption still occurred at environmentally relevant air concentrations. We conclude that deactivation of GFFs does not allow for the separation of gaseous and particle bound perfluorinated carboxylic acids (PFCAs) during active air sampling. Consequently, the well-recognised theory that PFCAs do not prevail as gaseous species in the atmosphere may be based on biased measurements. Caution should be taken to ensure that this artefact will not bias the conclusions of future field studies.

Particle size specific distribution of perfluoro alkyl substances in atmospheric particulate matter in Asian cities

Seasonal and local characteristics of perfluorinated alkylated substances (PFASs) were examined using size-segregated particles including an ultrafine range. The examination included sampling and analysis of ambient particles collected at four sites located in different environments in three different countries, Japan (Kanazawa and Okinawa), Hong Kong and India. To minimize the evaporation artefacts derived from PFASs during the sampling, an air sampler that permitted particles smaller than 0.1 μm (PM_0.1) to be separated at a moderate pressure drop (<5-15 kPa), was used for all of the air sampling procedures. In the case of Kanazawa, a local city in Japan, the concentration of PFASs was found to be dominated by carboxylates, especially PFOA, PFNA and PFDA regardless of the particle size and sampling period. Ultrafine particles were found to be the largest contributor to the mass fraction of PFCAs, while the maximum PFOS mass fractions were determined to be in the coarse-sized fractions. The seasonal difference in the total PFAS concentration can be largely attributed to precipitation. The results were basically similar for all sites that were examined. The type of land use may be a more influencing factor on the mass fraction of the PFASs than the country of origin. The dependency of PFAS mass fraction on the specific surface of the particle suggests that ultrafine PFAS particles are segregated, not only by gas deposition but could also be segregated by a mechanism involving compositional dependence or the primary source of the particles. Other possible sources of PFASs, other than from traffic are also possible.

Aquatic Global Passive Sampling (AQUA-GAPS) Revisited: First Steps toward a Network of Networks for Monitoring Organic Contaminants in the Aquatic Environment

Organic contaminants, in particular persistent organic pollutants (POPs), adversely affect water quality and aquatic food webs across the globe. As of now, there is no globally consistent information available on concentrations of dissolved POPs in water bodies. The advance of passive sampling techniques has made it possible to establish a global monitoring program for these compounds in the waters of the world, which we call the Aquatic Global Passive Sampling (AQUA-GAPS) network. A recent expert meeting discussed the background, motivations, and strategic approaches of AQUA-GAPS, and its implementation as a network of networks for monitoring organic contaminants (e.g., POPs and others contaminants of concern). Initially, AQUA-GAPS will demonstrate its operating principle via two proof-of-concept studies focused on the detection of legacy and emerging POPs in freshwater and coastal marine sites using both polyethylene and silicone passive samplers. AQUA-GAPS is set up as a decentralized network, which is open to other participants from around the world to participate in deployments and to initiate new studies. In particular, participants are sought to initiate deployments and studies investigating the presence of legacy and emerging POPs in Africa, Central, and South America.

Emission of poly and perfluoroalkyl substances, UV-filters and siloxanes to air from wastewater treatment plants

The potential of wastewater treatment plants (WWTPs) to act as sources of poly and perfluoroalkyl substances (PFASs), volatile methyl siloxanes (VMSs) and organic UV-filters to the atmosphere was investigated. Target compounds included: PFASs (fluorotelomer alcohols (FTOHs), perfluorooctane sulfonamides/sulfonamidoethanols (FOSAs/FOSEs), perfluroalkyl sulfonic acids (PFSAs) and perfluroalkyl carboxylic acids (PFCAs)), cyclic VMSs (D3 to D6), linear VMSs (L3 to L5) and eight UV-filters. Emissions to air were assessed at eight WWTPs using paired sorbent-impregnated polyurethane foam passive air samplers, deployed during summer 2013 and winter 2014. Samplers were deployed on-site above the active tank and off-site as a reference. Several types of WWTPs were investigated: secondary activated sludge in urban areas (UR-AS), secondary extended aeration in towns (TW-EA) and facultative lagoons in rural areas (RU-LG). The concentrations of target compounds in air were ∼1.7-35 times higher on-site compared to the corresponding off-site location. Highest concentrations in air were observed at UR-AS sites while the lowest were at RU-LG. Higher air concentrations (∼2-9 times) were observed on-site during summer compared to winter, possibly reflecting enhanced volatilization due to higher wastewater temperatures or differences in influent wastewater concentrations. A significant positive correlation was obtained between concentrations in air and WWTP characteristics (influent flow rate and population in the catchment of the WWTP); whereas a weak negative correlation was obtained with hydraulic retention time. Emissions to air were estimated using a simplified dispersion model. Highest emissions to air were seen at the UR-AS locations. Emissions to air (g/year/tank) were highest for VMSs (5000-112,000) followed by UV-filters (16-2000) then ΣPFASs (10-110).

Emissions of Per- and Polyfluoroalkyl Substances in a Textile Manufacturing Plant in China and Their Relevance for Workers' Exposure

The manufacturing of high-performance fabrics requires numerous chemical treatment steps that involve the use of per- and polyfluoroalkyl substances (PFASs) to protect apparel against water, stain, and oil penetration. However, air and wastewater emissions of PFASs generated during this manufacturing are a potential threat to both factory workers and the environment. We investigated the occurrence and distribution of PFASs in wastewater, air, airborne particles, and settled dust in a textile manufacturing plant in China. PFOA and PFDA or their precursor compounds 8:2 FTOH and 10:2 FTOH were the dominant compounds in all environmental media tested, revealing that long-chain PFASs were preferably used for the manufacturing of functional garments. Besides, PFASs were detected along the textile manufacturing chain, indicating that they were used as durable water repellents and as surfactants in, for example, coating agents. The workers' exposure to FTOHs via air inhalation was up to 5 orders of magnitude higher than the background exposure of the general western population. To the best of our knowledge, this is the first study providing information regarding the emission of PFASs during the manufacturing of textiles via various environmental media.

Concentrations of organochlorine pesticides, polybrominated diphenyl ethers and perfluorinated compounds in the atmosphere of North Greenland

Atmospheric concentrations of organochlorine pesticides (OCPs), polybrominated diphenyl ethers (PBDEs) and neutral per- and polyfluoroalkyl substances (PFAS) have been measured at Villum Research Station, Station Nord (North Greenland) in the period 2008-2013. Atmospheric concentrations of OCPs at the same site have been previously reported for the years 2008-2010. The detection frequency and the average concentrations of OCPs have not significantly changed since the previous study. PBDE congeners (∑13PBDEs) were measured for the first time in North Greenland at concentrations similar to those observed for other remote sites, confirming that these compounds are ubiquitous in the Northern Hemisphere. The ∑13PBDEs concentration ranged from not detected (n.d.) to 6.26 pg m(-3). The BDE congeners found in more than 30% of the samples were BDE-17, BDE-28, BDE-47, BDE-71, BDE-99 and BDE-100. Also for neutral PFAS we present for the first time a multiyear series of measurements for North Greenland. The average sum of the seven measured neutral PFAS (∑7PFAS) ranged from 1.82 to 32.1 pg m(-3). The most abundant compound was 8:2 FTOH (44% of ∑7PFAS), followed by 6:2 FTOH and 10:2 FTOH. Perfluoroalkyl sulfonamides (FOSA) and perfluoroalkyl sulfonamidoethanols (FOSE) were also detected but at much lower concentrations than FTOHs. Temporal trends were investigated for all measured compounds but no significant trend in concentration was observed. Monthly average concentrations for the six years were calculated for each compound and the seasonal variation was investigated. Some OCPs and FTOHs showed seasonal variations, and in most cases a maximum was found during summer.

Neutral and ionic per- and polyfluoroalkyl substances (PFASs) in atmospheric and dry deposition samples over a source region (Tianjin, China)

Per- and polyfluoroalkyl substances (PFASs) were detected in the atmosphere of a source region in Tianjin, China. Fluorotelomer alcohols (FTOHs) were the dominant neutral PFASs in the atmosphere with total concentrations of 93.6-131 pg/m(3) and 8:2 FTOH contributing the most, whereas perfluorooctane sulfonamide derivatives (PFOSAs) were two magnitudes lower or undetected. In comparison, ionic PFASs (perfluoroalkyl carboxyl acids (PFCAs)) in the atmosphere were detected at similar or even higher levels. At wastewater treatment plants (WWTPs), the air over influent was found with higher levels of FTOHs than over aeration tank and effluent; whereas in the air over the aeration tank, the concentrations of PFOSAs and nonvolatile ionic PFASs substantially increased, suggesting a possible direct release of ionic PFASs to the atmosphere besides the atmospheric conversion from volatile precursors. In the air phase, a low proportion (1-5%) of PFCAs was subjected to dry deposition in the source region. Interestingly, the dry-deposition-to-bulk-air ratios of PFCA analogues were the lowest at medium chain lengths (C8 and C9) and increased with either shorter or longer chain length. The extraordinary affinity of shorter-chain PFCAs (C6-C7) to particles was presumed to be due to their smaller molecular size favoring the interactions between the carboxyl head groups and specific sorption sites on particulate matter.

Perfluorinated compounds (PFCs) in the atmosphere of Shenzhen, China: Spatial distribution, sources and health risk assessment

This study investigated the occurrence of perfluorinated compounds (PFCs) in the atmosphere of Shenzhen, China. 11 PFCs, including two perfluoroalkyl sulfonic acids (PFSAs, C6 and C8) and perfluoroalkyl carboxylic acids (PFCAs, C4-12) were determined by high performance liquid chromatography-negative electrospray ionization-tandem mass spectrometry (HPLC/ESI-MS/MS). Total PFC concentrations (∑ PFCs) in the atmospheric samples ranged from 3.4 to 34 pg m(-3) with an average of 15 pg m(-3). Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) were the two most abundant PFCs and on average accounted for 35% and 22% of ∑ PFCs, respectively. ∑ PFCs and total PFCA concentrations (∑ PFCAs) showed a tendency of low-lying East West, while the distribution of total PFSA concentrations (∑ PFSAs) was uniform. Higher concentrations of ∑ PFCs were found in Bao'an District which had very well-developed manufacturing industries. PCA model was employed to quantitatively calculate the contributions of sources. The results showed that PFOA-factor, long chain PFCs-factor and PFOS-factor were the three main source categories for PFCs in the atmosphere. Meanwhile, long-distance transport of pollutants from southeastern coastal areas might be another source of PFCs in Shenzhen atmosphere. PFCs in the atmosphere were more positively correlated with the levels PM10 than PM2.5, which indicated PFCs were more likely to adhere to particles with relatively large sizes. The hazard ratios of noncancer risk through breathing based on PFOS and PFOA concentrations were calculated and were less than unity, suggesting that PFCs concentrations may pose no or immediate threat to the residents in Shenzhen.

Perfluorooctane sulfonate: a review of human exposure, biomonitoring and the environmental forensics utility of its chirality and isomer distribution

Perfluorooctane sulfonate (PFOS) found extensive use for over 60 years up until its restriction in the early 2000s, culminating in its listing under the Stockholm Convention on Persistent Organic Pollutants (POPs) in 2009. Efforts to minimise human body burdens are hindered by uncertainty over their precise origins. While diet appears the principal source for the majority of western populations (with other pathways like dust ingestion, drinking water and inhalation also important contributors); the role played by exposure to PFOS-precursor compounds followed by in vivo metabolism to PFOS as the ultimate highly stable end-product is unclear. Such PFOS-precursor compounds include perfluorooctane sulfonamide derivates, e.g., perfluorooctane sulfonamides (FOSAs) and sulfonamidoethanols (FOSEs). Understanding the indirect contribution of such precursors to human body burdens of PFOS is important as a significant contribution from this pathway would render the margin of safety between the current exposure limits and estimates of external exposure to PFOS alone, narrower than hitherto appreciated. Estimates derived from mathematical modelling studies, put the contribution of so-called "precursor exposure" at between 10% and 40% of total PFOS body burdens. However, there are substantial uncertainties associated with such approaches. This paper reviews current understanding of human exposure to PFOS, with particular reference to recent research highlighting the potential of environmental forensics approaches based on the relative abundance and chiral signatures of branched chain PFOS isomers to provide definitive insights into the role played by "precursor exposure".

Spatial distribution of selected persistent organic pollutants (POPs) in Australia's atmosphere

A nation-wide passive air sampling campaign recorded concentrations of persistent organic pollutants in Australia's atmosphere in 2012. XAD-based passive air samplers were deployed for one year at 15 sampling sites located in remote/background, agricultural and semi-urban and urban areas across the continent. Concentrations of 47 polychlorinated biphenyls ranged from 0.73 to 72 pg m(-3) (median of 8.9 pg m(-3)) and were consistently higher at urban sites. The toxic equivalent concentration for the sum of 12 dioxin-like PCBs was low, ranging from below detection limits to 0.24 fg m(-3) (median of 0.0086 fg m(-3)). Overall, the levels of polychlorinated biphenyls in Australia were among the lowest reported globally to date. Among the organochlorine pesticides, hexachlorobenzene had the highest (median of 41 pg m(-3)) and most uniform concentration (with a ratio between highest and lowest value ∼5). Bushfires may be responsible for atmospheric hexachlorobenzene levels in Australia that exceeded Southern Hemispheric baseline levels by a factor of ∼4. Organochlorine pesticide concentrations generally increased from remote/background and agricultural sites to urban sites, except for high concentrations of α-endosulfan and DDTs at specific agricultural sites. Concentrations of heptachlor (0.47-210 pg m(-3)), dieldrin (ND-160 pg m(-3)) and trans- and cis-chlordanes (0.83-180 pg m(-3), sum of) in Australian air were among the highest reported globally to date, whereas those of DDT and its metabolites (ND-160 pg m(-3), sum of), α-, β-, γ- and δ-hexachlorocyclohexane (ND-6.7 pg m(-3), sum of) and α-endosulfan (ND-27 pg m(-3)) were among the lowest.

Current challenges in air sampling of semivolatile organic contaminants: sampling artifacts and their influence on data comparability

With current science and policy needs, more attention is being given to expanding and improving air sampling of semivolatile organic contaminants (SVOCs). However, a wide range of techniques and configurations are currently used (active and passive samplers, different deployment times, different sorbents, etc.) and as the SVOC community looks to assess air measurements on a global scale, questions of comparability arise. We review current air sampling techniques, with a focus on sampling artifacts that can lead to uncertainties or biases in reported concentrations, in particular breakthrough, degradation, meteorological influences, and assumptions regarding passive sampling. From this assessment, we estimate the bias introduced for SVOC concentrations from all factors. Due to the effects of breakthrough, degradation, particle fractions and sampler uptake periods, some current passive and active sampler configurations may underestimate certain SVOCs by 30-95%. We then recommend future study design, appropriateness of sampler types for different study goals, and finally, how the SVOC community should move forward in both research and monitoring to best achieve comparability and consistency in air measurements.

Temporal variations of cyclic and linear volatile methylsiloxanes in the atmosphere using passive samplers and high-volume air samplers

Cyclic and linear volatile methylsiloxanes (cVMSs and lVMSs, respectively) were measured in ambient air over a period of over one year in Toronto, Canada. Air samples were collected using passive air samplers (PAS) consisting of sorbent-impregnated polyurethane foam (SIP) disks in parallel with high volume active air samplers (HV-AAS). The average difference between the SIP-PAS derived concentrations in air for the individual VMSs and those measured using HV-AAS was within a factor of 2. The air concentrations (HV-AAS) ranged 22-351 ng m(-3) and 1.3-15 ng m(-3) for ΣcVMSs (D3, D4, D5, D6) and ΣlVMSs (L3, L4, L5), respectively, with decamethylcyclopentasiloxane (D5) as the dominant compound (∼75% of the ΣVMSs). Air masses arriving from north to northwest (i.e., less populated areas) were significantly less contaminated with VMSs compared to air arriving from the south that are impacted by major urban and industrial areas in Canada and the U.S. (p < 0.05). In addition, air concentrations of ΣcVMSs were lower during major snowfall events (on average, 73 ng m(-3)) in comparison to the other sampling periods (121 ng m(-3)). Ambient temperature had a small influence on the seasonal trend of VMS concentrations in air, except for dodecamethylcyclohexasiloxane (D6), which was positively correlated with the ambient temperature (p < 0.001).

Neutral polyfluoroalkyl substances in the global atmosphere

Concentrations of neutral per- and polyfluoroalkyl substances (nPFAS) in the atmosphere are of interest because nPFAS are highly mobile percursors for perfluoroalkyl acids. Two calibration studies in Ontario, Canada and Costa Rica established the feasibility of using XAD 2-resin based passive air samplers (XAD-PAS) to reliably determine long term average air concentrations of nPFAS under temperate and tropical climatic conditions. The temporal and spatial distribution of nPFAS was investigated by analyzing XAD-PAS deployed for one year at between 17 and 46 sites on six continents between 2006 and 2011 as part of the Global Atmospheric Passive Sampling (GAPS) study. Higher levels of fluorotelomer alcohols (FTOHs) compared to fluorinated sulfonamides (FOSAs), and fluorinated sulfonamidoethanols (FOSEs) were observed at all sites. Urban sites had the highest levels of nPFAS compared to rural and remote sites, which is also apparent in a positive correlation of nPFAS levels with the proximity of a sampling site to areas of high population density. Levels of FOSAs and FOSEs tended to decrease during the six years of measurements, whereas an initial decline in the concentrations of FTOHs from 2006 to 2008 did not continue in 2009 to 2011. A comparison of nPFAS levels measured in national XAD-PAS networks in Costa Rica and Botswana revealed that the GAPS sites in Tapanti and the Kalahari are representative of the more remote regions in those countries. XAD-PAS derived absolute nPFAS levels at GAPS sites are lower than those measured using another PAS, but are within the range of levels measured with active air samplers. Agreement of relative nPFAS composition is better between samplers, suggesting that the discrepancy is due to uncertain sampling rates.

Characterization of two passive air samplers for per- and polyfluoroalkyl substances

Two passive air sampler (PAS) media were characterized under field conditions for the measurement of per- and polyfluoroalkyl substances (PFASs) in the atmosphere. The PASs, consisting of polyurethane foam (PUF) and sorbent-impregnated PUF (SIP) disks, were deployed for over one year in parallel with high volume active air samplers (HV-AAS) and low volume active air samplers (LV-AAS). Samples were analyzed for perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkane sulfonic acids (PFSAs), fluorotelomer alcohols (FTOHs), fluorotelomer methacrylates (FTMACs), fluorotelomer acrylates (FTACs), perfluorooctane sulfonamides (FOSAs), and perfluorooctane sulfonamidoethanols (FOSEs). Sampling rates and the passive sampler medium (PSM)-air partition coefficient (KPSM-A) were calculated for individual PFASs. Sampling rates were similar for PFASs present in the gas phase and particle phase, and the linear sampling rate of 4 m(-3) d(-1) is recommended for calculating effective air sample volumes in the SIP-PAS and PUF-PAS for PFASs except for the FOSAs and FOSEs in the PUF-PAS. SIP disks showed very good performance for all tested PFASs while PUF disks were suitable only for the PFSAs and their precursors. Experiments evaluating the suitability of different isotopically labeled fluorinated depuration compounds (DCs) revealed that (13)C8-perfluorooctanoic acid (PFOA) was suitable for the calculation of site-specific sampling rates. Ambient temperature was the dominant factor influencing the seasonal trend of PFASs.

Determination of perfluorochemicals in fish and shellfish using liquid chromatography-tandem mass spectrometry

This paper reports the validation and application of a method for determination of 10 perfluorochemicals (PFCs) in retail fish and shellfish. The analytes of interest were 7 perfluorinated carboxylates and 3 perfluorinated sulfonates. Fish and shellfish samples were digested with a basic solution of 10 mM sodium hydroxide in methanol before sonication and solid phase extraction through weak anion exchange. Analysis was performed using liquid chromatography-tandem mass spectrometry. Recoveries from spiking five different types of fish and shellfish indicate that the method performs similarly with different fish types, and recoveries were over 90% for all analytes. Forty-six retail samples, collected between 2010 and 2012, including 13 different types of fish and shellfish were analyzed for PFCs. The 13 different types included the top 10 most-consumed fish and shellfish in the United States according to data collected by the National Fisheries Institute. Two Standard Reference Materials were also analyzed. Most fish and shellfish had no detected PFCs; only 11 samples of the 46 tested had detectable concentrations of PFCs.

Perfluoroalkyl acids in the Canadian environment: multi-media assessment of current status and trends

In Canada, perfluoroalkyl acids (PFAAs) have been the focus of several monitoring programs and research and surveillance studies. Here, we integrate recent data and perform a multi-media assessment to examine the current status and ongoing trends of PFAAs in Canada. Concentrations of perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA), and other long-chain perfluorocarboxylates (PFCAs) in air, water, sediment, fish, and birds across Canada are generally related to urbanization, with elevated concentrations observed around cities, especially in southern Ontario. PFOS levels in water, fish tissue, and bird eggs were below their respective Draft Federal Environmental Quality Guidelines, suggesting there is low potential for adverse effects to the environment/organisms examined. However, PFOS in fish and bird eggs tended to exceed guidelines for the protection of mammalian and avian consumers, suggesting a potential risk to their wildlife predators, although wildlife population health assessments are needed to determine whether negative impacts are actually occurring. Long-term temporal trends of PFOS in suspended sediment, sediment cores, Lake Trout (Salvelinus namaycush), and Herring Gull (Larus argentatus) eggs collected from Lake Ontario increased consistently from the start of data collection until the 1990s. However, after this time, the trends varied by media, with concentrations stabilizing in Lake Trout and Herring Gull eggs, and decreasing and increasing in suspended sediment and the sediment cores, respectively. For PFCAs, concentrations in suspended sediment, sediment cores, and Herring Gulls generally increased from the start of data collection until present and concentrations in Lake Trout increased until the late 1990s and subsequently stabilized. A multimedia comparison of PFAA profiles provided evidence that unexpected patterns in biota of some of the lakes were due to unique source patterns rather than internal lake processes. High concentrations of PFAAs in the leachate and air of landfill sites, in the wastewater influent/effluent, biosolids, and air at wastewater treatment plants, and in indoor air and dust highlight the waste sector and current-use products (used primarily indoors) as ongoing sources of PFAAs to the Canadian environment. The results of this study demonstrate the utility of integrating data from different media. Simultaneous evaluation of spatial and temporal trends in multiple media allows inferences that would be impossible with data on only one medium. As such, more co-ordination among monitoring sites for different media is suggested for future sampling, especially at the northern sites. We emphasize the importance of continued monitoring of multiple-media for determining future responses of environmental PFAA concentrations to voluntary and regulatory actions.

Seasonal variations in the atmospheric concentrations of polybrominated diphenyl ethers in Kuwait

The study reports fortnightly atmospheric concentrations of PBDEs concomitantly measured at an urban and a remote location over a twelve-month period in Kuwait to examine seasonal variability and urban-rural concentration gradients. The annual mean (and range) of ∑PBDE concentrations was 32 (3-208) pgm(-3) at the remote site and 57 (0.3-445) pgm(-3) at the urban site. Although not statistically significant, the median (29 pg m(-3)) and mean (57 pg m(-3)) concentrations at the urban location were higher than those measured at the remote location (18 and 29 pg m(-3) respectively), consistent with the view that urban centers are an important net source of these compounds to the environment. Although Clausius-Clapeyron plots showed statistically significant correlations (p<0.05) with temperature for low molecular weight congeners (BDEs 28, 47, 100), correlations with the ΣPBDE concentrations were not significant at both urban and remote sites. The seasonal variations in ΣPBDE concentrations were not markedly different at the urban location, but the median summer ΣPBDE concentration at the remote location was significantly higher than winter median ΣPBDE concentrations. The absence in seasonality at the urban location may be due to ongoing primary emissions in urban areas.