Gas-phase formaldehyde adsorption isotherm studies on activated carbon: correlations of adsorption capacity to surface functional group density

Synthesis of BiOX-Red Mud/Granulated Blast Furnace Slag Geopolymer Microspheres for Photocatalytic Degradation of Formaldehyde

Release of formaldehyde gas indoors is a serious threat to human health. The traditional adsorption method is not stable enough for formaldehyde removal. Photocatalytic degradation of formaldehyde is effective and rapid, but photocatalysts are generally expensive and not easy to recycle. In this paper, geopolymer microspheres were applied as matrix materials for photocatalysts loading to degrade formaldehyde. Geopolymer microspheres were prepared from red mud and granulated blast furnace slag as raw materials by alkali activation. When the red mud doping was 50%, the concentration of NaOH solution was 6 mol/L, and the additive amount was 30 mL, the prepared geopolymer microspheres possessed good morphological characteristics and a large specific surface area of 38.80 m2/g. With the loading of BiOX (X = Cl, Br, I) photocatalysts on the surface of geopolymer microspheres, 85.71% of formaldehyde gas were adsorbed within 60 min. The formaldehyde degradation rate of the geopolymer microspheres loaded with BiOI reached 87.46% within 180 min, which was 23.07% higher than that of the microspheres loaded with BiOBr, and 50.50% higher than that of the microspheres loaded with BiOCl. While ensuring the efficient degradation of formaldehyde, the BiOX (X = Cl, Br, I)-loaded geopolymer microspheres are easy to recycle and can save space. This work not only promotes the resource utilization of red mud and granulated blast furnace slag, but also provides a new idea on the formation of catalysts in the process of photocatalytic degradation of formaldehyde.

Excellent Mercury Removal in High Sulfur Atmosphere Using a Novel CuS-BDC-2D Derived by Metal-Organic Frame

To effectively remove high concentrations of mercury in a high sulfur atmosphere of nonferrous smelting flue gas, a novel two-dimensional CuS-MOF (CuS-BDC-2D) material is synthesized by anchoring S to Cu sites in the Cu-BDC MOF. The highly dispersed CuS active sites and MOF framework structural properties in CuS-BDC-2D enable efficiently collaborate in capturing mercury. CuS-BDC-2D exhibits a layered floral structure with high specific surface area and thermal stability, with poor crystallinity. Compared to CuS and the three-dimensional CuS-MOF (CuS-BDC-3D) structure, CuS-BDC-2D demonstrates significantly higher mercury capture capacity due to the high exposure of active sites and defects sites in the two-dimensional material. Moreover, CuS-BDC-2D exhibits excellent resistance to sulfur, maintaining its high efficiency in removing Hg0 even at high levels of sulfur dioxide (SO2), such as 5000-20,000 ppm. The superior performance of CuS-BDC-2D makes it suitable for controlling mercury emissions in actual nonferrous smelting flue gas. This discovery also paves the way for the development of new mercury adsorbents, which can guide future advancements in this field.

Doping of porous carbons with sulfur and nitrogen markedly enhances their surface activity for formaldehyde removal

The surfaces of phosphoric acid activated carbon, referred to as CG, and steam activated one, referred to as SX, were modified through an introduction of S- and N- groups originated from thiourea. The prepared samples were used for formaldehyde removal at room temperature. Heating at 450, 600 and 950 °C altered both surface chemistry and porosity. The extents of these modifications depended on the type of carbon. Using thiourea as the modifier resulted in an incorporation of significant amounts of nitrogen and sulfur to the carbon matrices. Their speciation depended on the heat treatment conditions. The activity of samples heated at 450 °C was governed by amine groups of thiourea retained on the surface. A further heat treatment converted gradually amine nitrogen into pyridines/pyrroles and quaternary nitrogen, shifting the adsorption mechanism to rather specific interactions than a direct chemical reactivity. Carbons with few times less nitrogen than in their amine-modified counterparts, but in quaternary form and with the small amount of sulfur in thiophenic configurations, regardless the origin, worked as very efficient adsorbents of HCHO. Due to the modification of the carbon matrix electronic structure, resulting in a positive charge on carbon atoms in the vicinity of the heteroatoms incorporated to carbon rings, the density of specific adsorption centers on the surface in larger pores was significantly higher than that in ultramicropores. This markedly contributed to efficient utilization of pores/surface, where heteroatom can exist and where otherwise the dispersive adsorptions forces would be weak, for HCHO removal at ambient conditions.

Solving two environmental problems simultaneously：Microporous carbon derived from mixed plastic waste for CO2 capture

Conversion of plastic waste into porous carbon for CO2 capture is an attractive approach to solve the carbon emission and plastic pollution problems, simultaneously. However, the previous studies are limited to the utilization of single PET plastic. The conversion of mixed plastic waste (MPW), which is of more practical significance, is seldom reported. In this study, mixed plastic waste was converted into porous carbon materials for CO2 capture through cascading autogenic pressure carbonization (APC) and chemical activation. The carbon yield of 56% was achieved through APC of MPW. The activator (KOH) dosage had significant effects on the structure and properties of the prepared porous carbons. Porous carbon prepared with KOH/C ratio of 4 had the largest micropore area and the maximum CO2 adsorption was 2.7 mmol g-1 at 298 K and 1 bar. The experimental data were well fitted to the pesudo first-order kinetic model. The MPW derived porous carbon exhibited not only high CO2 uptake capacity, but also fast adsorption rate, good selectivity of CO2 over N2 and good cyclic stability, which could be regarded as a promising adsorbent for CO2 adsorption.

Efficient degradation of formaldehyde based on DFT-screened metal-doped C3N6 monolayer photocatalysts: performance evaluation and mechanistic insights

Photocatalytic oxidation is an efficient and promising technology for reducing indoor pollution levels of formaldehyde (HCHO). However, developing efficient and low-cost photocatalysts for the removal of HCHO remains challenging due to the time-consuming and expensive nature of traditional "trial and error" and "directed research" approaches. To achieve this goal, first-principles density functional theory (DFT) calculations were conducted to high-throughput screen candidate TM-C3N6 photocatalysts for high-performance degradation of HCHO. The results revealed that Zr-C3N6 and Hf-C3N6 in functionalizing C3N6 with 28 transition metals showed excellent adsorption energy of HCHO, boosting the highly effective capture of HCHO. Meanwhile, an excellent adsorption performance mechanism was further elicited by the electric structure-property relationship. In addition, reaction mechanisms for HCHO degradation and three potential reaction pathways for HCHO degradation were systematically evaluated. Our findings indicated that hydroxyl-assisted dehydrogenation and oxygen-assisted dehydrogenation are the most favorable pathways, with rate-limiting steps involving the formation of ˙OH and ˙O radicals. Overall, this study may provide new insights into a high-throughput screening of novel photocatalysts that are both high-performing and low-cost for the removal of formaldehyde. This, in turn, can accelerate the experimental development process and reduce the associated costs and time consumption.

High Efficiency of Formaldehyde Removal and Anti-bacterial Capability Realized by a Multi-Scale Micro-Nano Channel Structure in Hybrid Hydrogel Coating Cross-Linked on Microfiber-Based Polyurethane

Inspired by the transpiration in the tree stem having a vertical and porous channel structure, high efficiency of formaldehyde removal is realized by the multi-scale micro-nano channel structure in a hybrid P(AAm/DA)-Ag/MgO hydrogel coating cross-linked on microfiber-based polyurethane. The present multi-scale channel structure is formed by a joint effect of directional freezing and redox polymerization as well as nanoparticles-induced porosity. Due to the large number of vertically aligned channels of micrometer size and an embedded porous structure of nanometer size, the specific surface area is significantly increased. Therefore, formaldehyde from solution can be rapidly adsorbed by the amine group in the hydrogels and efficiently degraded by the Ag/MgO nanoparticles. By only immersing in formaldehyde solution (0.2 mg mL^-1) for 12 h, 83.8% formaldehyde is removed by the hybrid hydrogels with a multi-scale channel structure, which is 60.8% faster than that observed in hydrogels without any channel structure. After cross-linking the hybrid hydrogels with a multi-scale channel structure to microfiber-based polyurethane and exposing to the formaldehyde vapor atmosphere, 79.2% formaldehyde is removed in 12 h, which is again 11.2% higher than that observed in hydrogels without any channel structure. Unlike the traditional approaches to remove formaldehyde by the light catalyst, no external conditions are required in our present hybrid hydrogel coating, which is very suitable for indoor use. In addition, due to the formation of free radicals by the Ag/MgO nanoparticles, the cross-linked hybrid hydrogel coating on polyurethane synthetic leather also shows good anti-bacterial capability. 99.99% of Staphylococcus aureus can be killed on the surface. Based on the good ability to remove formaldehyde and to kill bacteria, the obtained microfiber-based polyurethane cross-linked with a hybrid hydrogel coating containing a multi-scale channel structure can be used in a broad field of applications, such as furniture and car interior parts, to simultaneously solve the indoor air pollution and hygiene problems.

Green synthesis of carbon quantum dots toward highly sensitive detection of formaldehyde vapors using QCM sensor

In the present study, an eco-friendly method for the preparation of carbon quantum dots (CQDs) is demonstrated using hydrothermal treatment of laurel leaves. The optical and structural characteristics of the prepared CQDs are investigated using transmission electron microscopy (TEM), X-ray photoelectron (XPS), fluorescent and UV-visible spectroscopies, Fourier transform infrared (FTIR), and X-ray diffraction (XRD). The quartz crystal microbalance (QCM) sensor designed and modified with CQDs is capable of detecting formaldehyde vapors in the presence of other interfering chemical-vapor analytes. The changes in the frequency of the QCM sensor are linearly correlated with the injected formaldehyde concentrations. The sensing properties of formaldehyde, including sensitivity and reversibility, are investigated. Detection of formaldehyde in the presence of humidity is carefully discussed for home or workplace room environment use. The adsorption kinetics of various VOCs vapors are also calculated and discussed.

Highly Active Amino-Fullerene Derivative-Modified TiO2 for Enhancing Formaldehyde Degradation Efficiency under Solar-Light Irradiation

Formaldehyde (HCHO) is a ubiquitous indoor pollutant that seriously endangers human health. The removal of formaldehyde effectively at room temperature has always been a challenging problem. Here, a kind of amino-fullerene derivative (C60-EDA)-modified titanium dioxide (C60-EDA/TiO2) was prepared by one-step hydrothermal method, which could degrade the formaldehyde under solar light irradiation at room temperature with high efficiency and stability. Importantly, the introduction of C60-EDA not only increases the adsorption of the free formaldehyde molecules but also improves the utilization of sunlight and suppresses photoelectron-hole recombination. The experimental results indicated that the C60-EDA/TiO2 nanoparticles exhibit much higher formaldehyde removal efficiency than carboxyl-fullerene-modified TiO2, pristine TiO2 nanoparticles, and almost all other reported formaldehyde catalysts especially in the aspect of the quality of formaldehyde that is treated by catalyst with unit mass (mHCHO/mcatalyst = 40.85 mg/g), and the removal efficiency has kept more than 96% after 12 cycles. Finally, a potential formaldehyde degradation pathway was deduced based on the situ diffuse reflectance infrared Fourier transform spectrometry (DRIFTS) and reaction intermediates. This work provides some indications into the design and fabrication of the catalysts with excellent catalytic performances for HCHO removal at room temperature.

A Brief Review of Formaldehyde Removal through Activated Carbon Adsorption

Formaldehyde is a highly toxic indoor pollutant that can adversely impact human health. Various technologies have been intensively evaluated to remove formaldehyde from an indoor atmospheres. Activated carbon (AC) has been used to adsorb formaldehyde from the indoor atmosphere, which has been commercially viable owing to its low operational costs. AC has a high adsorption affinity due to its high surface area. In addition, applications of AC may be diversified by the surface modification. Among the different surface modifications for AC, amination treatments of AC have been reported and evaluated. Specifically, the amine functional groups of the amine-treated AC have been found to play an important role in the adsorption of formaldehyde. Surface modifications of AC by impregnating and/or grafting the amine functional groups onto the AC surface have been reported in the literature. The impregnation of the amine-containing species on AC is mainly achieved by physical interaction or H-bond of the amines to the AC surface. Meanwhile, the grafting of the amine functional groups is mainly conducted through chemical reactions occurring between the amines and the AC surface. Herein, the carboxyl group, as a representative functional group for grafting on the surface of AC, plays a key role in the amination reactions. A qualitative comparison of amination chemicals for the surface modification of AC has also been discussed. Thermodynamics and kinetics for adsorption of formaldehyde on AC are firstly reviewed in this paper, and then the major factors affecting the adsorptive removal of formaldehyde over AC are highlighted and discussed in terms of humidity and temperature. In addition, new strategies for amination, as well as the physical modification option for AC application, are proposed and discussed in terms of safety and processability.

Aerobic naphthenic acid-degrading bacteria in petroleum-coke improve oil sands process water remediation in biofilters: DNA-stable isotope probing reveals methylotrophy in Schmutzdecke

There is an increasing interest in treatment of oil sands process water (OSPW) via biofiltration with petroleum coke (PC) as a substratum. In fixed bed biofilters (FBBs) with PC, the dominance of anaerobic digestion of dissolved organics results in poor removal of naphthenic acids (NAs) along with a high degree of methanogenesis. In this study, the operation of FBBs was modified to improve OSPW remediation by supporting the filtering bed with aerobic naphthenic acid-degrading bacteria treating aerated OSPW (FBB_{bioaugmentation}). The results were compared with a biofilter operated under controlled conditions (FBB_control). To this end, a consortium of three aerobic NAs-degrading bacterial strains was immobilized on PC as a top layer (10 cm). These bacteria were pre-screened for growth on 15 different NAs surrogates as a sole carbon source, and for the presence of catabolic genes coding alkane hydroxylase (CYP153) and alkane monooxygenase (alkB) enzymes. The results illustrated that biofiltration in FBB_{bioaugmentation} removed 32% of classical NAs in 15 days; while in the FBB_control, degradation was limited to 19%. The degradation of fluorophore (aromatic) compounds was also improved from 16% to 39% for single ring (O_I), 22% to 29% for double ring (O_II), and 15% to 23% for three rings (O_III) compounds. DNA-Stable Isotope Probing revealed that potential hydrocarbons degraders such as Pseudomonas (inoculated), Pseudoxanthomonas (indigenous) were present up to 9.0% in the ¹³C-labelled DNA fraction. Furthermore, a high abundance of methylotrophs was observed in the Schmutzdecke, with Methylobacillus comprising more than two-third of the total community. This study shows that bioaugmentation rapidly improved OSPW remediation. Aeration mostly contributed to methane consumption in the top layer, thus minimizing its release into the environment.

Equilibrium and hysteresis formation of water vapor adsorption on microporous adsorbents: Effect of adsorbent properties and temperature

Water vapor has been one of the vital problems in purification of volatile organic compounds. In this study, the adsorption-desorption equilibrium of water vapor were conducted at 298, 308, 318, and 328 K on three adsorbents: hypercrosslinked polymeric adsorbents (HPA), activated carbon fiber (ACF) and granular activated carbon (GAC). The obtained isotherms were type V and the adsorption capacity at the same condition was: GAC>ACF>HPA. cluster formation induced micropore filling (CIMF) model was adopted to fit the adsorption isotherms and the fitting parameters showed that adsorption capacities of water vapor on micropores and functional groups had a negative logarithmic linear relationship with temperature. The existence of functional groups could weaken the negative influence of temperature on the water adsorption performance, while the influence of temperature had negligible relationship with microporous volume. The hysteresis loops at different temperatures on three adsorbents had similar shape, the size of which were also: GAC>ACF>HPA. They mainly occurred in micropore adsorption, but their size had positive relationships with both functional groups and microporous volume. The hysteresis became smaller along with the increase of temperature, closely related with the stability of water clusters. In conclusion, temperature, functional groups and porous structure played crucial roles for water vapor adsorption and the formation of hysteresis.Implications: Water vapor is one of the vital influence for VOCs recovery, so studying the adsorption mechanism of water vapor is important to weaken its negative effect. Adsorption capacities of water vapor on both micropores and functional groups had a negative logarithmic linear relationship with temperature. The existence of functional groups could weaken the negative influence of temperature on the water adsorption performance, while the influence of temperature had negligible relationship with microporous volume. The hysteresis loops on three adsorbents mainly occurred in micropore adsorption, but their size had positive relationships with both functional groups and microporous volume.

Key factors and primary modification methods of activated carbon and their application in adsorption of carbon-based gases: A review

To achieve carbon neutrality, it is necessary to control carbon-based gas emissions to the atmosphere. Among the various carbon-based gas removal technologies reported to date, adsorption is considered one of the most promising because of its economic efficiency, reusability, and low energy consumption. Activated carbon is widely used to treat different types of carbon-based gases owing to its large specific surface area, abundant functional groups, and strong adsorption capacity. This paper reviews the recent research progress into activated carbon as an adsorbent for carbon-based gases. The key factors (i.e., specific surface area, pore structure, and surface functional groups) affecting the adsorption of carbon-based gases by activated carbon were analyzed. The main methods employed to modify activated carbon (i.e., surface oxidation, surface reduction, loading materials, and plasma modification methods) to improve its adsorption capacity are also discussed herein, along with the targeted applications of such material in the adsorption of different types of carbon-based gases (such as aldehydes, ketones, aromatic hydrocarbons, halogenated hydrocarbons, and carbon-based greenhouse gases). Finally, the future development directions and challenges of activated carbon are discussed. Our work will be expected to benefit the development of activated carbon exhibiting selective adsorption properties, and reduce the production costs of adsorbents.

Comparative studies on the VOC sorption performances over hierarchical and conventional ZSM-5 zeolites

The sorption behaviors of hexane, toluene and mesitylene as probe volatile organic compounds (VOCs) over hierarchical and conventional zeolite ZSM-5 were investigated by a series of experiments, such as dynamic adsorption, temperature-programmed desorption and cycle adsorption tests. The results showed that hierarchical ZSM-5 exhibited better adsorption capacity for toluene and mesitylene, better diffusion of VOCs and superior cycle adsorption efficiency. As we believe, these findings will offer valuable information for the development of zeolite based adsorbents for VOC elimination or recycling.

Introducing Polyhydroxyurethane Hydrogels and Coatings for Formaldehyde Capture

Formaldehyde (FA) is a harmful chemical product largely used for producing resins found in our living spaces. Residual FA that leaches out the resin contributes to our indoor air pollution and causes some important health issues. Systems able to capture this volatile organic compound are highly desirable; however, traditional adsorbents are most often restricted to air filtration systems. Herein, we report novel waterborne coatings that are acting as a FA sponge for indoor air decontamination. These coatings, of the poly(hydroxyurethane) (PHU) type, rich in primary amine groups, are prepared by the polyaddition of a hydrosoluble dicyclic carbonate to a polyamine in water at room temperature under catalyst-free conditions. We highlight the importance of the choice of the polyamine on the curing rate of the formulation and on the FA capture ability of PHU. The excellent FA capturing ability of the best candidate is rationalized by investigating the action mode of the polyamine used to construct PHUs. With poly(vinyl amine), FA is covalently and permanently bound to PHU, with no release over time. The performance of the coating in FA abatement is impressive, with more than 90% of captured FA after one day of contact. The facility to prepare these transparent and colorless coatings from waterborne formulations gives access to new efficient indoor air depolluting solutions, potentially applicable to various surfaces of our living spaces (wall, ceiling, etc.).

Efficient removal of formaldehyde using metal-biochar derived from acid mine drainage sludge and spent coffee waste

A novel metal-biochar (Biochar/AMDS) composite were fabricated by co-pyrolysis of spent coffee waste (SCW)/acid mine drainage sludge (AMDS), and their effective application in adsorptive removal of air pollutants such as formaldehyde in indoor environments was evaluated. The physicochemical characteristics of Biochar/AMDS were analyzed using SEM/EDS, XRF, XRD, BET, and FTIR. The characterization results illustrated that Biochar/AMDS had the highly porous structure, carbonaceous layers, and heterogeneous Fe phases (hematite, metallic Fe, and magnetite). The fixed-bed column test showed that the removal of formaldehyde by Biochar/AMDS was 18.4-fold higher than that by metal-free biochar (i.e., SCW-derived biochar). Changing the ratio of AMDS from 1:6 to 1:1 significantly increased the adsorption capacity for formaldehyde from 1008 to 1811 mg/g. In addition, thermal treatment of used adsorbent at 100 °C effectively restored the adsorptive function exhausted during the column test. These results provide new insights into the fabrication of practical, low-cost and ecofriendly sorbent for formaldehyde.

Self-wetting triphase photocatalysis for effective and selective removal of hydrophilic volatile organic compounds in air

Photocatalytic air purification is widely regarded as a promising technology, but it calls for more efficient photocatalytic materials and systems. Here we report a strategy to introduce an in-situ water (self-wetting) layer on WO3 by coating hygroscopic periodic acid (PA) to dramatically enhance the photocatalytic removal of hydrophilic volatile organic compounds (VOCs) in air. In ambient air, water vapor is condensed on WO3 to make a unique tri-phasic (air/water/WO3) system. The in-situ formed water layer selectively concentrates hydrophilic VOCs. PA plays the multiple roles as a water-layer inducer, a surface-complexing ligand enhancing visible light absorption, and a strong electron acceptor. Under visible light, the photogenerated electrons are rapidly scavenged by periodate to produce more •OH. PA/WO3 exhibits excellent photocatalytic activity for acetaldehyde degradation with an apparent quantum efficiency of 64.3% at 460 nm, which is the highest value ever reported. Other hydrophilic VOCs like formaldehyde that are readily dissolved into the in-situ water layer on WO3 are also rapidly degraded, whereas hydrophobic VOCs remain intact during photocatalysis due to the "water barrier effect". PA/WO3 successfully demonstrated an excellent capacity for degrading hydrophilic VOCs selectively in wide-range concentrations (0.5-700 ppmv).

Bacterial diversity in petroleum coke based biofilters treating oil sands process water

Adopting nature-based solutions for the bioremediation of oil sands process water (OSPW) is of significant interest, which requires a thorough understanding of how bacterial communities behave within treatment systems operated under natural conditions. This study investigates the OSPW remediation potential of delayed petroleum-coke (PC), which is a byproduct of bitumen upgrading process and is readily available at oil refining sites, in fixed-bed biofilters particularly for the degradation of naphthenic acids (NAs) and aromatics. The biofilters were operated continuously and total and active bacterial communities were studied by DNA and RNA-based amplicon sequencing in a metataxonomic fashion to extrapolate the underlying degradation mechanisms. The results of total community structure indicated a high abundance of aerobic bacteria at all depths of the biofilter, e.g., Porphyrobacter, Legionella, Pseudomonas, Planctomyces. However, redox conditions within the biofilters were anoxic (-153 to -182 mV) that selected anaerobic bacteria to actively participate in the remediation of OSPW, i.e., Ruminicoccus, Eubacterium, Faecalibacterium, Dorea. After 15 days of operation, the removal of classical NAs was recorded up to 20% whereas oxidized NAs species were poorly removed, i.e., O₃-NAs: 4.8%, O₄-NAs: 1.2%, O₅-NAs: 1.7%, and O₆-NAs: 0.5%. Accordingly, monoaromatics, diaromatics, and triaromatics were removed up to 16%, 22%, and 15%, respectively. The physiology of the identified genera suggested that the degradation in the PC-based biofilters was most likely proceeded in a scheme similar to beta-oxidation during anaerobic digestion process. The presence of hydrogenotrophic methanogens namely Methanobrevibacter and Methanomassiliicoccus and quantification of mcrA gene (2.4 × 10² to 8.7 × 10² copies/mg of PC) revealed that methane production was likely occurring in a syntrophic mechanism during the OSPW remediation. A slight reduction in toxicity was also observed. This study suggests that PC-based biofilters may offer some advantages in the remediation of OSPW; however, the production of methane could be of future concerns if operated at field-scale.

Potential applications of porous organic polymers as adsorbent for the adsorption of volatile organic compounds

Volatile organic compounds (VOCs) with high toxicity and carcinogenicity are emitted from kinds of industries, which endanger human health and the environment. Adsorption is a promising method for the treatment of VOCs due to its low cost and high efficiency. In recent years, activated carbons, zeolites, and mesoporous materials are widely used to remove VOCs because of their high specific surface area and abundant porosity. However, the hydrophilic nature and low desorption rate of those materials limit their commercial application. Furthermore, the adsorption capacities of VOCs still need to be improved. Porous organic polymers (POPs) with extremely high porosity, structural diversity, and hydrophobic have been considered as one of the most promising candidates for VOCs adsorption. This review generalized the superiority of POPs for VOCs adsorption compared to other porous materials and summarized the studies of VOCs adsorption on different types of POPs. Moreover, the mechanism of competitive adsorption between water and VOCs on the POPs was discussed. Finally, a concise outlook for utilizing POPs for VOCs adsorption was discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.

Mechanical and Adsorptive Properties of Foamed EVA-Modified Polypropylene/Bamboo Charcoal Composites

Due to its excellent adsorption and humidity control function, bamboo charcoal (BC) has often been mixed with polypropylene (PP) to produce PP/BC composites for interior paneling applications. However, due to the poor foaming quality of PP, PP/BC composites suffer as a result of their high density, which limits their scope of use. Here, to improve its foaming quality, PP was modified with ethylene vinyl acetate (EVA), and then the EVA-modified PP (E-PP) was mixed with different contents of BC (0 wt.%–50 wt.%), as well as foaming agent (Azodicarbonamide, AC) and its auxiliaries (ZnO, Znst), in a twin-screw extruder, followed by hot-pressing at high temperature to obtain foamed E-PP/BC composites. The resulting composites showed good porosity and pore distribution with an increase of BC content by up to 20%. Further increase in the BC content seemed to cause the foaming performance to decrease significantly. The product density and adsorption rate increased, while the mechanical strength decreased with increasing BC content. At a BC content of 40 wt.%, the foamed E-PP/BC composite showed the best combined performance, with a density of 0.90 g/cm³, 24-h formaldehyde adsorption rate of 0.48, and bending strength of 11.59 MPa.

An efficient strategy for the enhancement of adsorptivity of microporous carbons against gaseous formaldehyde: Surface modification with aminosilane adducts

In an effort to develop a cost-effective mitigation tool for volatile organic compounds, particularly formaldehyde (FA), microporous activated carbon (AC) was modified into three different forms of AC-1, AC-2, and AC-3 using a raw commercial AC product (AC-0). First, AC-1 and AC-2 were produced by the modification of AC-0 with N/S heteroatoms using identical mixture of dicyandiamide and thiourea precursors through either solvothermal (AC-1) or microwave-assisted calcination (AC-2) synthesis. Second, aminosilane-functionalized AC (AC-3) was prepared solvothermally using N-[3-(Trimethoxysilyl)propyl]ethylenediamine reagent. The relative adsorption performances for gaseous FA (1 ppm) in terms of 10% breakthrough volume (BTV10: L atm g^-1) at near-ambient conditions (25 °C and 1 atm) were AC-3 (132) > AC-2 (66.5) > AC-1 (14.2) > AC-0 (10.4). In a comparison based on partition coefficients (mole kg^-1 Pa^-1) at BTV10, AC-3 outperformed AC-0 by a factor of 214, while the adsorption performance of AC-2 was 36-times higher than AC-1. The enhanced performance of AC-2 over AC-1 reflected the effect of the microwave synthesis protocol on the improvement of surface chemistry (e.g., N/S doping) and texture (e.g., surface area and pore volume) of AC-based adsorbents as compared to conventional solvothermal method. Further, the prominent role of surface chemistry (e.g., relative to textural properties), as observed with the increases in the amount of doped functional elements (including N:C and silicon:C ratios), is supported by the apparent dependence of performance on the selected modification procedures. Based on kinetic and X-ray photoelectron spectroscopy analyses, the superiority of aminosilylated AC-3 can be attributed to a synergistic effect between physisorption (e.g., pore diffusion) and chemical interactions of the FA carbonyl (C=O) group with amine and silica functionalities (via Mannich coupling [Schiff base] and cycloaddition reaction mechanisms, respectively). This confirms the significance of surface chemistry, relative to pore diffusion, in achieving maximum adsorption of gaseous FA molecules.

Adsorption of low-concentration VOCs on various adsorbents: Correlating partition coefficient with surface energy of adsorbent

Accurately evaluating the adsorption properties of various adsorbents by some parameter is of great significance to select an appropriate adsorbent and remove volatile organic compounds (VOCs) efficiently. In this study, we successfully found a new parameter as a common standard in selecting adsorbents. Six classical adsorbents containing three carbon materials and three porous polymeric resins were used, and their surface energy (γ_s^t) and corresponding gas-solid partition coefficients (K) of eleven VOCs were measured by inverse gas chromatography (IGC) at three different column temperatures of 343 K(or 353 K), 373 K and 403 K. Then, these values at 303 K were calculated according to the linear relationship between lnK and 1/T. It was found that surface energy was significantly correlated with K values for a specific VOC, and could be used as a common standard to well evaluate the adsorption properties of various adsorbents. Furthermore, we employed it to develop a model for predicting the adsorption properties of low-concentration VOCs on various adsorbents at 303 K. The developed model exhibited an excellent predictive ability by external validation. Moreover, the model showed wide applicability and predicted the lnK values of VOCs at 373 K and 403 K in R² of 0.910 and 0.889.

Facet- and defect-engineered Pt/Fe2O3 nanocomposite catalyst for catalytic oxidation of airborne formaldehyde under ambient conditions

Formaldehyde (HCHO) is one of the most infamous indoor pollutants that imposes a great threat to human health. Herein, we report the development of a high-performance Pt/Fe₂O₃ catalyst for HCHO oxidation employing a facet- and defect-engineering strategy, with special focus on the surface structure effect of α-Fe₂O₃ on the catalytic properties. A supported Pt nanocatalyst on hollow octadecahedral α-Fe₂O₃ with exclusively exposed {113} and {104} facets was prepared using a hydrothermal method followed by impregnation-reduction treatment. The high-index facets of α-Fe₂O₃ render the formation of abundant oxygen vacancies and an improved dispersion of Pt nanoparticles. This led to an increased Pt/O-vacancy coexistence in close proximity, which collaboratively promote the generation of active oxygen and surface OH species. As a consequence, the Pt/Fe₂O₃-HO catalyst exhibited impressively high and stable activity towards HCHO oxidation at room temperature, which was five-fold higher than that of the supported Pt catalyst on commercial α-Fe₂O₃.

A critical review on VOCs adsorption by different porous materials: Species, mechanisms and modification methods

Volatile organic compounds (VOCs) have attracted world-wide attention regarding their serious hazards on ecological environment and human health. Industrial processes such as fossil fuel combustion, petrochemicals, painting, coatings, pesticides, plastics, contributed to the large proportion of anthropogenic VOCs emission. Destructive methods (catalysis oxidation and biofiltration) and recovery methods (absorption, adsorption, condensation and membrane separation) have been developed for VOCs removal. Adsorption is established as one of the most promising strategies for VOCs abatement thanks to its characteristics of cost-effectiveness, simplicity and low energy consumption. The prominent progress in VOCs adsorption by different kinds of porous materials (such as carbon-based materials, oxygen-contained materials, organic polymers and composites is carefully summarized in this work, concerning the mechanism of adsorbate-adsorbent interactions, modification methods for the mentioned porous materials, and enhancement of VOCs adsorption capacity. This overview is to provide a comprehensive understanding of VOCs adsorption mechanisms and up-to-date progress of modification technologies for different porous materials.

Indoor Air Pollution, Related Human Diseases, and Recent Trends in the Control and Improvement of Indoor Air Quality

Indoor air pollution (IAP) is a serious threat to human health, causing millions of deaths each year. A plethora of pollutants can result in IAP; therefore, it is very important to identify their main sources and concentrations and to devise strategies for the control and enhancement of indoor air quality (IAQ). Herein, we provide a critical review and evaluation of the major sources of major pollutant emissions, their health effects, and issues related to IAP-based illnesses, including sick building syndrome (SBS) and building-related illness (BRI). In addition, the strategies and approaches for control and reduction of pollutant concentrations are pointed out, and the recent trends in efforts to resolve and improve IAQ, with their respective advantages and potentials, are summarized. It is predicted that the development of novel materials for sensors, IAQ-monitoring systems, and smart homes is a promising strategy for control and enhancement of IAQ in the future.

Utilization of metal-organic frameworks for the adsorptive removal of an aliphatic aldehyde mixture in the gas phase

Considerable efforts have been undertaken in the domain of air quality management for the removal of hazardous volatile organic compounds, particularly carbonyl compounds (CCs). In this study, the competitive sorptive removal of six CCs (namely, formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde) was assessed using selected metal-organic frameworks (MOFs: MOF-5, MOF-199, UiO-66, and UiO-66-NH₂) and inexpensive commercial activated carbon as a reference sorbent. The sorption experiments were conducted using a mixture of the six CCs (formaldehyde and acetaldehyde at ∼1 Pa and propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde at ∼0.2 Pa) together with 15 Pa water and 2.6 Pa methanol in 1 bar nitrogen. For all of the carbonyl compounds other than formaldehyde, MOF-199 showed the best 10% breakthrough performance ranging from 34 L g^-1 and 0.14 mol kg^-1 Pa^-1 for acetaldehyde to 1870 L g^-1 and 7.6 mol kg^-1 Pa^-1 for isovaleraldehyde. Among all the sorbents tested, UiO-66-NH₂ exhibited the best 10% breakthrough performance metrics towards the lightest formaldehyde which remains to be one of the most difficult targets for sorptive removal (breakthrough volume: 285 L g^-1 and partition coefficient: 1.1 mol kg^-1 Pa^-1). Theoretical density functional theory (DFT)-based computations were also conducted to provide better insights into the adsorbate-adsorbent interactions. Accordingly, the magnitude of adsorption energy increased with an increase in the CC molar mass due to an enhancement in the synergetic interaction between C[double bond, length as m-dash]O groups (in adsorbate molecules) and the MOF active centers (open metallic centers and/or NH₂ functionality) as the adsorbent. Such interactions were observed to result in strong distortion of MOF structures. In contrast, weak van der Waals attraction between the hydrocarbon "tail" of CC molecules and MOF linkers were seen to play a stabilizing role for the sorbent structure. The presence of the NH₂ group in the MOF structure was suspected to play a key role in capturing lighter CCs, while such an effect was less prominent for heavier CCs. Overall, the results of this study provided a basis for the establishment of an effective strategy to enhance the sorption capacity of MOFs against diverse carbonyl species.

A novel method for textile odor removal using engineered water nanostructures

The malodor attached to textiles not only causes indoor environmental pollution but also endangers people's health even at low concentrations. Existing technologies cannot effectively eliminate the odor. Herein, an effective and environmentally friendly technology was proposed to address this challenging issue. This technology utilizes electrospraying process to produce Engineered Water Nanostructures (EWNS) in a controllable manner. Upon application of a high voltage to the Taylor cone, EWNS can be generated from the condensed vapor water through a Peltier element. Smoking, cooking and perspiration, considered the typical indoor malodorous gases emitted from human activities, were studied in this paper. A headspace SPME method in conjunction with GC-MS was employed for the extraction, detection and quantification of any odor residues. Results indicated that EWNS played a significant role in the deodorization process with removal efficiencies for the three odors were 95.3 ± 0.1%, 100.0 ± 0.0% and 43.7 ± 2.3%, respectively. The Reactive Oxygen Species (ROS) contained in the EWNS, mainly hydroxyl (OH˙) and superoxide radicals are the possible mechanisms for the odor removal. These ROS are strong oxidative and highly reactive and have the ability to convert odorous compounds to non-odorous compounds through various chemical reaction mechanisms. This study showed clearly the potential of the proposed method in the field of odor removal and can be applied in the battle against indoor air pollution.

Gaseous formaldehyde removal: A laminated plate fabricated with activated carbon, polyimide, and copper foil with adjustable surface temperature and capable of in situ thermal regeneration

Formaldehyde is one of the most common indoor air pollutants in Chinese residences. This study introduces a novel laminated plate with adjustable surface temperature to remove gaseous formaldehyde. The plate is fabricated with activated carbon, polyimide, and copper foil via thermal compression. The plate can be regenerated in situ by applying a direct current to the copper foil. Adsorption-regeneration cycle tests were conducted to evaluate the plate's formaldehyde removal performance. The overall removal efficiency of the fabricated laminated plate with glue mass fraction of 25% and thickness of 1.5 mm was about 30% at the face velocity of 0.8-1.2 m/s. The pressure drop was about 5 Pa. Its removal ability can be regenerated in situ in 8 minutes by increasing the surface temperature to 80°C. The fabricated laminated plate showed good durability after 52 cycles of adsorption-regeneration tests. The results indicate that the proposed laminated plate can enhance the purifying efficiency and enlarge the life span of ordinary, cheap sorbents. It makes cheap materials with low performance suitable for air purification.

High-performance materials for effective sorptive removal of formaldehyde in air

As formaldehyde (FA) is well-known for its carcinogenic potential, various techniques for its removal have been developed based on recovery (e.g., adsorption/absorption and condensation) or destructive treatment (e.g., incineration and thermal/ catalytic oxidation). Among them, adsorption has been one of the most preferable options due to its low price and simplicity. In this review, we summarize state-of-the-art knowledge about adsorption mechanisms with respect to its key controlling variables (e.g., surface chemical properties of adsorbent, temperature, and relative humidity) and adsorption performance of materials with particular emphasis on advanced materials (e.g., carbon nanotubes, metal-organic frameworks, graphene oxides, and porous organic polymers) and their modified forms in comparison with conventional sorbents (e.g., AC and zeolite). However, it is yet difficult to assess the adsorption capacity of each material on a parallel basis because adsorption experiments of each material were conducted under different conditions (e.g., large differences in the initial loading concentrations). The partition coefficient (PC) was employed for evaluating adsorption performance between different materials at an equivalent level to overcome the limitation based on adsorption capacity concept. For instance, among the list of the surveyed materials, the highest PC was recorded by γ-CD-MOF-K (31.2 mol kg^-1 Pa^-1). This study should offer valuable insights into the selection and development of outstanding materials for the sorptive removal of FA.

Enhanced Formaldehyde Removal from Air Using Fully Biodegradable Chitosan Grafted β-Cyclodextrin Adsorbent with Weak Chemical Interaction

Formaldehyde (HCHO) is an important indoor air pollutant. Herein, a fully biodegradable adsorbent was synthesized by the crosslinking reaction of β-cyclodextrin (β-CD) and chitosan via glutaraldehyde (CGC). The as-prepared CGC showed large adsorption capacities for gaseous formaldehyde. To clarify the adsorption performance of the as-synthesized HCHO adsorbents, changing the adsorption parameters performed various continuous flow adsorption tests. It was found that the adsorption data agreed best with the Freundlich isotherm, and the HCHO adsorption kinetic data fitted well with the pseudo second order model. The breakthrough curves indicated that the HCHO adsorbing capacity of CGC was up to 15.5 mg/g, with the inlet HCHO concentration of 46.1 mg/m³, GHSV of 28 mL/min, and temperature of 20 °C. The regeneration and reusability of the adsorbent were evaluated and CGC was found to retain its adsorptive capacity after four cycles. The introduction of β-CD was a key factor for the satisfied HCHO adsorption performance of CGC. A plausible HCHO adsorption mechanism by CGC with the consideration of the synergistic effects of Schiff base reaction and the hydrogen bonding interaction was proposed based on in situ DRIFTS studies. The present study suggests that CGC is a promising adsorbent for the indoor formaldehyde treatment.

Advanced nanonetwork-structured carbon materials for high-performance formaldehyde capture

Facile design and construction of advanced materials for eliminating the indoor formaldehyde pollution is still a great challenge but very desirable to provide clean air for human life. Herein, we report a high-performance formaldehyde adsorbent, i.e., a new type of nanonetwork-structured carbon (NNSC) with a hollow nanosphere as network unit by developing a facile, efficient and post-treatment-free strategy. The NNSCs can be easily obtained by a simple carbonization of a mixture, in which natural wheat husk and Teflon are used as carbon precursor and biotemplate-in-situ-remover, respectively. The as-constructed NNSC exhibits a unique three-dimensional interconnected micro-, meso- and macroporous nanonetwork. Benefiting from such a valuable hollow nanosphere-interconnected network structure, the NNSCs show surprising formaldehyde gas adsorption properties including super-high storage capacity, ultrafast adsorption rate and efficient adsorptively active surface. Remarkably, their specific adsorption capacity and maximum adsorption rate are as high as 120.3 mg g^-1 m^-3 and 44.6 mg g^-1 m^-3 h^-1, which make 18-fold and 41-fold enhancement when compared to activated carbon commercially used for formaldehyde adsorption, respectively. This work highlights an efficient solution to develop high-performance formaldehyde adsorbents by facile and rational construction of novel porous structure, simultaneously to provide a new avenue to high-value advanced materials for challenging environmental issue.

Enhancing the Dissolution Stability of Hard Gelatin Capsules Using Activated Carbon as a Packaging Component

Hard gelatin capsule (HGC) shells are widely used to encapsulate drugs for oral delivery but are vulnerable to gelatin cross-linking, which can lead to slower and more variable in vitro dissolution rates. Adding proteolytic enzymes to the dissolution medium can attenuate these problems, but this complicates dissolution testing and is only permitted by some regulatory authorities. Here, we expand the scope of our previous work to demonstrate that canisters containing activated carbon (AC) or polymeric films embedded with AC particles can be used as packaging components to attenuate gelatin cross-linking and improve the dissolution stability of hard gelatin-encapsulated products under accelerated International Council for Harmonisation conditions. We packaged acetaminophen and diphenhydramine HCl HGCs with or without AC canisters in induction-sealed high-density polyethylene bottles and with or without AC films in stoppered glass vials and stored these samples at 50°C/75% relative humidity through 3 months and at 40°C/75% relative humidity for 6 months. Samples packaged with AC canisters or AC films dissolved more rapidly than samples packaged without AC when differences were observed. These results demonstrate that different sources and formats of AC can enhance the dissolution stability of HGCs packaged in bottles and other potential packaging systems such as blister cards.

Active {001} Facet Exposed TiO2 Nanotubes Photocatalyst Filter for Volatile Organic Compounds Removal: From Material Development to Commercial Indoor Air Cleaner Application

TiO₂ nanotubes (TNT) have a highly ordered open structure that promotes the diffusion of dioxygen and substrates onto active sites and exhibit high durability against deactivation during the photocatalytic air purification. Herein, we synthesized {001} facet-exposed TiO₂ nanotubes (001-TNT) using a new and simple method that can be easily scaled up, and tested them for the photocatalytic removal of volatile organic compounds (VOCs) in both a laboratory reactor and a commercial air cleaner. While the surface of TNT is mainly composed of {101} facet anatase, 001-TNT's outer surface was preferentially aligned with {001} facet anatase. The photocatalytic degradation activity of toluene on 001-TNT was at least twice as high as that of TNT. While the TNT experienced a gradual deactivation during successive cycles of photocatalytic degradation of toluene, the 001-TNT did not exhibit any sign of catalyst deactivation under the same test conditions. Under visible light irradiation, the 001-TNT showed degradation activity for acetaldehyde and formaldehyde, while the TNT did not exhibit any degradation activity for them. The 001-TNT filter was successfully scaled up and installed on a commercial air cleaner. The air cleaner equipped with the 001-TNT filters achieved an average VOCs removal efficiency of 72% (in 30 min of operation) in a 8-m³ test chamber, which satisfied the air cleaner standards protocol (Korea) to be the first photocatalytic air cleaner that passed this protocol.

A New Generation of Surface Active Carbon Textiles As Reactive Adsorbents of Indoor Formaldehyde

Highly porous carbon textiles were modified by impregnation with urea, thiourea, dicyandiamide, or penicillin G, followed by heat treatment at 800 °C. This resulted in an incorporation of nitrogen or nitrogen and sulfur heteroatoms in various configurations to the carbon surface. The volume of pores and, especially, ultramicropores was also affected to various extents. The modified textiles were then used as adsorbents of formaldehyde (1 ppmv) in dynamic conditions. The modifications applied significantly improved the adsorptive performance. For the majority of samples, formaldehyde adsorption resulted in a decrease in the volume of ultramicropores. The enhancement in the adsorption was linked not only to the physical adsorption of formaldehyde in small pores but also to its reactivity with sulfonic groups and amines present on the surface. Water on the surface and in challenge gas decreased the adsorptive performance owing to the competition with formaldehyde for polar centers. The results collected show that the S- and N-modified textiles can work as efficient media for indoor formaldehyde removal.

Effective Formaldehyde Capture by Green Cyclodextrin-Based Metal-Organic Framework

A kind of metal-organic framework made from γ-cyclodextrin (γ-CD) and potassium ions were explored as excellent formaldehyde (HCHO) absorbents. The adsorption capacity and speed of γ-CD-MOF-K are both about 9 times higher than those of activated carbon, which are attributed to the porous structure and synergistic effect of hydrogen bonding and host-guest interactions.

Characterization of volatile organic compound adsorption on multiwall carbon nanotubes under different levels of relative humidity using linear solvation energy relationship

Multiwall carbon nanotubes (MWCNTs) have been used as an adsorbent for evaluating the gas/solid partitioning of selected volatile organic compounds (VOCs). In this study, 15 VOCs were probed to determine their gas/solid partitioning coefficient (LogKd) using inverse gas chromatography at different relative humidity (RH) levels. Interactions between MWCNTs and VOCs were analyzed by regressing the observed LogKd with the linear solvation energy relationship (LSER). The results demonstrate that the MWCNT carbonyl and carboxyl groups provide high adsorption capacity for the VOCs (LogKd 3.72-5.24g/kg/g/L) because of the π-/n-electron pair interactions and hydrogen-bond acidity. The increasing RH gradually decreased the LogKd and shifted the interactions to dipolarity/polarizability, hydrogen-bond basicity, and cavity formation. The derived LSER equations provided adequate fits of LogKd, which is useful for VOC-removal processes and fate prediction of VOC contaminants by MWCNT adsorption in the environment.

Use of Activated Carbon in Packaging to Attenuate Formaldehyde-Induced and Formic Acid-Induced Degradation and Reduce Gelatin Cross-Linking in Solid Dosage Forms

Formaldehyde and formic acid are reactive impurities found in commonly used excipients and can be responsible for limiting drug product shelf-life. Described here is the use of activated carbon in drug product packaging to attenuate formaldehyde-induced and formic acid-induced drug degradation in tablets and cross-linking in hard gelatin capsules. Several pharmaceutical products with known or potential vulnerabilities to formaldehyde-induced or formic acid-induced degradation or gelatin cross-linking were subjected to accelerated stability challenges in the presence and absence of activated carbon. The effects of time and storage conditions were determined. For all of the products studied, activated carbon attenuated drug degradation or gelatin cross-linking. This novel use of activated carbon in pharmaceutical packaging may be useful for enhancing the chemical stability of drug products or the dissolution stability of gelatin-containing dosage forms and may allow for the 1) extension of a drug product's shelf-life when the limiting attribute is a degradation product induced by a reactive impurity, 2) marketing of a drug product in hotter and more humid climatic zones than currently supported without the use of activated carbon, and 3) enhanced dissolution stability of products that are vulnerable to gelatin cross-linking.

Capture of formaldehyde by adsorption on nanoporous materials

The aim of this work is to assess the capability of a series of nanoporous materials to capture gaseous formaldehyde by adsorption in order to develop air treatment process and gas detection in workspaces or housings. Adsorption-desorption isotherms have been accurately measured at room temperature by TGA under very low pressure (p<2 hPa) on various adsorbents, such as zeolites, mesoporous silica (SBA15), activated carbon (AC NORIT RB3) and metal organic framework (MOF, Ga-MIL-53), exhibiting a wide range of pore sizes and surface properties. Results reveal that the NaX, NaY and CuX faujasite (FAU) zeolites are materials which show strong adsorption capacity and high affinity toward formaldehyde. In addition, these materials can be completely regenerated by heating at 200°C under vacuum. These cationic zeolites are therefore promising candidates as adsorbents for the design of air depollution process or gas sensing applications.