Syntheses, Structures, and Properties of New Manganese Carbonyls as Photoactive CO-Releasing Molecules: Design Strategies That Lead to CO Photolability in the Visible Region

A comprehensive survey of Mn(I) carbonyls as CO-releasing molecules reported over the last two decades

Over the last two decades, manganese(I) carbonyl complexes have been widely investigated as carbon monoxide releasing molecules (CORMs) to transfer small quantities of CO to biological targets to have beneficial impacts such as preventing ischemia reperfusion injury and reducing organ transplant rejection. Furthermore, these complexes exhibit beneficial anti-coagulative, anti-apoptotic, anti-inflammatory, and anti-proliferative properties. Owing to their highly controlled substitution chemistry and oxidative durability, Mn(I) carbonyl moieties were combined with a wide range of auxiliary ligands, including biomolecules. This review focused on tri- and tetracarbonyl Mn(I) complexes that were exposed to light, changed the redox status, or underwent thermal activation to release carbon monoxide. Kinetic parameters, stability in the dark, number of CO release equivalents, CO detection tools, and the nature of solvents used in the studies are reported and tabulated. An overview of all the previously published Mn(I) CORMs is specifically provided to define the method of action of these promising biologically active compounds and discuss their possible therapeutic applications in relation to their CO-releasing and biocompatibility characteristics.

Photochargeable Mn-Based Metal-Organic Framework and Decoupled Photocatalysis

Designing multifunctional materials that mimic the light-dark decoupling of natural photosynthesis is a key challenge in the field of energy conversion. Herein, we introduce MnBr-253, a precious metal-free metal-organic framework (MOF) built on Al nodes, bipyridine linkers and MnBr(CO)3(bipyridine) complexes. Upon irradiation, MnBr-253 colloids demonstrate an electron photocharging capacity of ~42 C ⋅ g-1 MOF, with state-of-the-art photocharging rate (1.28 C ⋅ s-1 ⋅ g-1 MOF) and incident photon-to-electron conversion efficiency of ~9.4 % at 450 nm. Spectroscopic and computational studies support effective electron accumulation at the Mn complex while high porosity and Mn loading account for the notable electron storage performance. The charged MnBr-253 powders were successfully applied for hydrogen evolution under dark conditions thus emulating the light-decoupled reactivity of photosynthesis.

Spectroscopical and Molecular Studies of Four Manganese(I) PhotoCORMs with Bioinspired Ligands Containing Non-Coordinated Phenol Groups

Carbonyl compounds are widely explored in medicinal inorganic chemistry and have drawn attention due to their signaling functions in homeostasis. Carbon-monoxide-releasing molecules (CORMs) were developed with the purpose of keeping the CO inactive until its release in the intracellular environment, considering its biological relevance. However, for therapeutic applications, the mechanisms of photorelease and which electronic and structural variations influence its rates must be fully understood. In this work, four ligands containing a pyridine, a secondary amine, and a phenolic group with different substituents were used to prepare new Mn(I) carbonyl compounds. Structural and physicochemical characterization of these complexes was carried out and confirmed the proposed structures. X-ray diffractometry structures obtained for the four organometallic compounds revealed that the substituents in the phenolic ring promote only negligible distortions in their geometry. Furthermore, UV-Vis and IR kinetics showed the direct dependence of the electron-withdrawing or donating ability of the substituent group, indicating an influence of the phenol ring on the CO release mechanism. These differences in properties were also supported by theoretical studies at the DFT, TD-DFT, and bonding situation analyses (EDA-NOCV). Two methods were used to determine the CO release constants (k_CO,old and k_CO,new), where Mn-HbpaBr (1) had the greatest k_CO by both methods (K_co,old = 2.36 × 10^-3 s^-1 and k_CO,new = 2.37 × 10^-3 s^-1). Carbon monoxide release was also evaluated using the myoglobin assay, indicating the release of 1.248 to 1.827 carbon monoxides upon light irradiation.

Water-Soluble Carbon Monoxide-Releasing Molecules (CORMs)

Carbon monoxide-releasing molecules (CORMs) are promising candidates for producing carbon monoxide in the mammalian body for therapeutic purposes. At higher concentrations, CO has a harmful effect on the mammalian organism. However, lower doses at a controlled rate can provide cellular signaling for mandatory pharmacokinetic and pathological activities. To date, exploring the therapeutic implications of CO dose as a prodrug has attracted much attention due to its therapeutic significance. There are two different methods of CO insertion, i.e., indirect and direct exogenous insertion. Indirect exogenous insertion of CO suggests an advantage of reduced toxicity over direct exogenous insertion. For indirect exogenous insertion, researchers are facing the issue of tissue selectivity. To solve this issue, developers have considered the newly produced CORMs. Herein, metal carbonyl complexes (MCCs) are covalently linked with CO molecules to produce different CORMs such as CORM-1, CORM-2, and CORM-3, etc. All these CORMs required exogenous CO insertion to achieve the therapeutic targets at the optimized rate under peculiar conditions or/and triggering. Meanwhile, the metal residue was generated from i-CORMs, which can propagate toxicity. Herein, we explain CO administration, water-soluble CORMs, tissue accumulation, and cytotoxicity of depleted CORMs and the kinetic profile of CO release.

Photoactive carbon monoxide-releasing coordination polymer particles

We report the synthesis of photoactive carbon monoxide-releasing coordination polymer particles through the assembly of Mn(I) carbonyl complexes with bis(imidazole) ligands. The use of Mn(I) carbonyl complexes as metallic nodes in the coordination network avoids the potential for aggregation-induced self-quenching, favouring their use in the solid state.

A Density Matrix Renormalization Group Study of the Low-Lying Excited States of a Molybdenum Carbonyl-Nitrosyl Complex

A density matrix renormalization group-self consistent field (DMRG-SCF) study has been carried out to calculate the low-lying excited states of CpMo(CO)2 NO, a molybdenum complex containing NO and CO ligands. In order to automatically select an appropriate active space, a novel procedure employing the maximum single-orbital entropy for several states has been introduced and shown to be efficient and easy-to-implement when several electronic states are simultaneously considered. The analysis of the resulting natural transition orbitals and charge-transfer numbers shows that the lowest five excited electronic states are excitation into metal-NO antibonding orbitals, which offer the possibility for nitric oxide (NO) photorelease after excitation with visible light. Higher excited states are metal-centered excitations with contributions of metal-CO antibonding orbitals, which may serve as a gateway for carbon monoxide (CO) delivery. Time-dependent density functional theory calculations done for comparison, show that the state characters agree remarkably well with those from DMRG-SCF, while excitation energies are 0.4-1.0 eV red-shifted with respect to the DMRG-SCF ones.

Phototriggered cytotoxic properties of tricarbonyl manganese(I) complexes bearing α-diimine ligands towards HepG2

Reaction between bromo tricarbonyl manganese(I) and N,N'-bis(phenyl)-1,4-diaza-1,3-butadiene ligands, bearing different electron-donating and electron-withdrawing groups R = OCH₃, Cl, and NO₂ in the ortho- and para-positions on the phenyl substituent, afforded [MnBr(CO)₃(N-N)] complexes. The influence of the character and position of the substituent on the dark stability and carbon monoxide releasing kinetics was systematically investigated and correlated with the data of the time-dependent density functional theory calculations. The combined UV/Vis and IR data clearly revealed that the aerated solutions of [MnBr(CO)₃(N-N)] in either coordinating or noncoordinating solvents are dark stable and the fluctuations observed during the incubation period especially in the case of the nitro derivatives may be attributed to the exchange of the axial bromo ligand with the coordinating solvent molecules. The free ligands and nitro complexes were non-cytotoxic to HepG2 cells under both the dark and illumination conditions. In the dark, Mn(I) compounds, incorporating o-OCH₃ and o-Cl, exhibited excellent cytotoxicity with IC₅₀ values of 18.1 and 11.8 μM, while their para-substituted analogues were inactive in the dark and active upon the irradiation at 365 nm with IC₅₀ values of 5.7 and 6.7 μM, respectively.

Efficient photorelease of carbon monoxide from a luminescent tricarbonyl rhenium(I) complex incorporating pyridyl-1,2,4-triazole and phosphine ligands

Precise control over the production of carbon monoxide (CO) is essential to exploit the therapeutic potential of this molecule. The development of photoactive CO-releasing molecules (PhotoCORMs) is therefore a promising route for future clinical applications. Herein, a tricarbonyl-rhenium(i) complex (1-TPP), which incorporates a phosphine moiety as ancilliary ligand for boosting the photochemical reactivity, and a pyridyltriazole bidentate ligand with appended 2-phenylbenzoxazole moiety for the purpose of photoluminescence, was synthesized and characterized from a chemical and crystallographic point of view. Upon irradiation in the near-UV range, complex 1-TPP underwent fast photoreaction, which was monitored through changes of the UV-vis absorption and phosphorescence spectra. The photoproducts (i.e. the dicarbonyl solvento complex 2 and one CO molecule) were identified using FTIR, 1H NMR and HRMS. The results were interpreted on the basis of DFT/TD-DFT calculations. The effective photochemical release of CO associated with clear optical variations (the emitted light passed from green to orange-red) could make 1-TPP the prototype of new photochemically-active agents, potentially useful for integration in photoCORM materials.

Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials

Photoactivatable (alternatively, photoremovable, photoreleasable, or photocleavable) protecting groups (PPGs), also known as caged or photocaged compounds, are used to enable non-invasive spatiotemporal photochemical control over the release of species of interest. Recent years have seen the development of PPGs activatable by biologically and chemically benign visible and near-infrared (NIR) light. These long-wavelength-absorbing moieties expand the applicability of this powerful method and its accessibility to non-specialist users. This review comprehensively covers organic and transition metal-containing photoactivatable compounds (complexes) that absorb in the visible- and NIR-range to release various leaving groups and gasotransmitters (carbon monoxide, nitric oxide, and hydrogen sulfide). The text also covers visible- and NIR-light-induced photosensitized release using molecular sensitizers, quantum dots, and upconversion and second-harmonic nanoparticles, as well as release via photodynamic (photooxygenation by singlet oxygen) and photothermal effects. Release from photoactivatable polymers, micelles, vesicles, and photoswitches, along with the related emerging field of photopharmacology, is discussed at the end of the review.

Hydrosilylation of Aldehydes by a Manganese α-Diimine Complex

This paper describes the catalytic activity of air stable and easy to handle manganese complexes towards the hydrosilylation of aldehydes. These catalysts incorporate a bulky diazabutadiene ligand and exhibit good functional group tolerance and chemoselectivity in the hydrosilylation of aldehydes, utilizing primary silanes as the reducing agent. The reactions proceed with turnover frequencies approaching 150 h−1 in some instances, similar to those observed for other manganese-based catalysts. The conversion of aromatic aldehydes to the corresponding alcohols was found to be more efficient than that for the analogous aliphatic systems.

Luminescent PhotoCORMs: Enabling/Disabling CO Delivery upon Blue Light Irradiation

The new luminescent carbonyl compounds [Mn(Oxa-H)(CO)₃Br] (1) and [Mn(Oxa-NMe₂)(CO)₃Br] (2) were synthesized and fully characterized. Complexes 1 and 2 showed CO release under blue light (λ₄₅₃). Spectroscopic techniques and TD-DFT and SOC-TD-DFT calculations indicated that 1 and 2 release the Oxa-H and Oxa-NMe₂ coligands in addition to the carbonyl ligands, increasing the luminescence during photoinduction.

Direct Measurement of the Visible to UV Photodissociation Processes for the PhotoCORM TryptoCORM

PhotoCORMs are light-triggered compounds that release CO for medical applications. Here, we apply laser spectroscopy in the gas phase to TryptoCORM, a known photoCORM that has been shown to destroy Escherichia coli upon visible-light activation. Our experiments allow us to map TryptoCORM's photochemistry across a wide wavelength range by using novel laser-interfaced mass spectrometry (LIMS). LIMS provides the intrinsic absorption spectrum of the photoCORM along with the production spectra of all of its ionic photoproducts for the first time. Importantly, the photoproduct spectra directly reveal the optimum wavelengths for maximizing CO ejection, and the extent to which CO ejection is compromised at redder wavelengths. A series of comparative studies were performed on TryptoCORM-CH3 CN which exists in dynamic equilibrium with TryptoCORM in solution. Our measurements allow us to conclude that the presence of the labile CH3 CN facilitates CO release over a wider wavelength range. This work demonstrates the potential of LIMS as a new methodology for assessing active agent release (e.g. CO, NO, H2 S) from light-activated prodrugs.

Cytotoxicity of photoactivatable bromo tricarbonyl manganese(i) compounds against human liver carcinoma cells

Two series of photoinduced tricarbonyl manganese(i) compounds were prepared from the reaction of [MnBr(CO)3(2-C(H)[double bond, length as m-dash]O)] (2-C(H)[double bond, length as m-dash]O: quinoline-2-carboxaldehyde and pyridine-2-carboxaldehyde) and para-substituted aniline derivatives (X = OH, OCH3, Cl and NO2). Different electron-donating and electron-withdrawing substituents were introduced in the para-position of the phenyl ring to investigate their influence on the stability of the compounds in the dark and the photophysical properties upon illumination at 525 nm. When kept in the dark, the aerated solutions of the complexes in dimethyl sulfoxide (DMSO) and CH2Cl2 were stable. In the solution, the complexes bearing electron-withdrawing substituents, exchange their bromo ligands with DMSO solvent molecules, as evidenced from infrared and UV/Vis studies as well as time-dependent density functional theory (TDDFT) calculations. The complexes were assessed for their cytotoxicity, both in the dark and upon exposure to a 525 nm LED, against the human hepatocarcinoma cell line (HepG2). A marked reduction in the viability of HepG2 cells treated with the complex functionalized with quinoline and methoxy substituent was observed after illumination in a dose-dependent manner, with an IC50 value of 7.1 μM, making it the most phototoxic compound in our study.

Synthesis, characterization and photoinduced CO-release by manganese(i) complexes

Three new photoCORM, two with non two with nonbonding pyridine and one with benzyl group, were synthesised, and their CO-releasing properties evaluated for with regards to their elusive binding mode.

Emerging Delivery Strategies of Carbon Monoxide for Therapeutic Applications: from CO Gas to CO Releasing Nanomaterials

Carbon monoxide (CO) therapy has emerged as a hot topic under exploration in the field of gas therapy as it shows the promise of treating various diseases. Due to the gaseous property and the high affinity for human hemoglobin, the main challenges of administrating medicinal CO are the lack of target selectivity as well as the toxic profile at relatively high concentrations. Although abundant CO releasing molecules (CORMs) with the capacity to deliver CO in biological systems have been developed, several disadvantages related to CORMs, including random diffusion, poor solubility, potential toxicity, and lack of on-demand CO release in deep tissue, still confine their practical use. Recently, the advent of versatile nanomedicine has provided a promising chance for improving the properties of naked CORMs and simultaneously realizing the therapeutic applications of CO. This review presents a brief summarization of the emerging delivery strategies of CO based on nanomaterials for therapeutic application. First, an introduction covering the therapeutic roles of CO and several frequently used CORMs is provided. Then, recent advancements in the synthesis and application of versatile CO releasing nanomaterials are elaborated. Finally, the current challenges and future directions of these important delivery strategies are proposed.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Synthesis, characterization and biological evaluation of new manganese metal carbonyl compounds that contain sulfur and selenium ligands as a promising new class of CORMs

Three new manganese carbonyl compounds with heavy atom donors were synthesized and their potential use as photoCORMS was evaluated.

A series of Mn(i) photo-activated carbon monoxide-releasing molecules with benzimidazole coligands: synthesis, structural characterization, CO releasing properties and biological activity evaluation

Five Mn(i) photo-activated carbon monoxide-releasing molecules were synthesized by reactions of MnBr(CO)₅ with L1–L4, and characterized via single crystal X-ray diffraction, ¹H-NMR, ¹³C-NMR, IR, UV-vis and fluorescence spectroscopy.

Intelligent Metal Carbonyl Metal-Organic Framework Nanocomplex for Fluorescent Traceable H2 O2 -Triggered CO Delivery

The recognized therapeutic benefits from carbon monoxide (CO) have caused booming attention to develop a CO therapy for various major diseases, such as cancer. However, the controlled release of CO gas and the monitoring of the CO release are vitally important to the on-demand CO administration for a safe and efficient therapy, but greatly challenging. In this work, a new CO-releasing nanocomplex was constructed by the adsorption and coordination of manganese carbonyl ([MnBr(CO)₅ ], abbreviated as MnCO) with a Ti-based metal-organic framework (Ti-MOF) to realize an intratumoral H₂ O₂ -triggered CO release and real-time CO release monitoring by fluorescence imaging. A high CO prodrug loading capacity (0.532 g MnCO per gram Ti-MOF) is achieved due to the high surface area of Ti-MOF, and the intracellular H₂ O₂ -triggered CO release from the MnCO@Ti-MOF is realized to enable the nanocomplex selectively release CO in tumor cells and kill tumor cells rather than normal cells. Particularly significant is that the real-time fluorescence imaging monitoring of the CO release is realized based on an annihilation effect of the fluorescence after MnCO loading into Ti-MOF and an activation effect of the fluorescence after CO release from Ti-MOF. The quantitative relationship between the fluorescence intensity and the released CO amount is established in great favor of guiding on-demand CO administration. The results demonstrate the advantage of versatile MOFs for high efficient CO delivery and monitoring, which is critical for the improvement of the effectiveness of future therapeutic application.

IClick cycloaddition reaction of light-triggered manganese(i) carbonyl complexes

For a binuclear blue-light-induced CO-releasing manganese(i) tricarbonyl complex bearing bidentate ligand, the effect of the ancillary ligand on the dark stability and photolysis process was studied.

Light-triggered CO delivery by a water-soluble and biocompatible manganese photoCORM

The discovery of salutary effects of low doses of carbon monoxide (CO) has spurred interest in designing exogenous molecules that can deliver CO to biological targets under controlled conditions. Herein we report a water-soluble photosensitive manganese carbonyl complex [MnBr(CO)3(pyTAm)] (2) (pyTAm = 2-(pyridyl)imino-triazaadamantane) that can be triggered to release CO upon exposure to visible light. Inclusion of a triazaadamantyl pharmacophore into the coligand of 2 improves its stability and solubility in water. Change in the coligand from 2-(pyridyl)imino-triazaadamantane to 2-(pyridyl)iminoadamantane (pyAm) or 2-(quinonyl)imino-triazaadamantane (qyTAm) dramatically alters these desired properties of the photoCORM. In addition to structures and CO-releasing properties of the three analogous complexes 1-3 from these three α-diimine ligands, theoretical calculations have been performed to determine the origin of Mn-CO bond labilization upon illumination. Rapid delivery of CO to myoglobin under physiological conditions attests the potential of 2 as a biocompatible photoCORM.

Mono- and Dinuclear Manganese Carbonyls Supported by 1,8-Disubstituted (L = Py, SMe, SH) Anthracene Ligand Scaffolds

Presented herein is a synthetic scheme to generate symmetric and asymmetric ligands based on a 1,8-disubstituted anthracene scaffold. The metal-binding scaffolds were prepared by aryl chloride activation of 1,8-dichloroanthracene using Suzuki-type couplings facilitated by [Pd(dba)2] as a Pd source; the choice of cocatalyst (XPhos or SPhos) yielded symmetrically or asymmetrically substituted scaffolds (respectively): namely, Anth-SMe2 (3), Anth-N2 (4), and Anth-NSMe (6). The ligands exhibit a nonplanar geometry in the solid state (X-ray), owing to steric hindrance between the anthracene scaffold and the coupled aryl units. To determine the flexibility and binding characteristics of the anthracene-based ligands, the symmetric scaffolds were complexed with [Mn(CO)5Br] to afford the mononuclear species [(Anth-SMe2)Mn(CO)3Br] (8) and [(Anth-N2)Mn(CO)3Br] (9), in which the donor moieties chelate the Mn center in a cis fashion. The asymmetric ligand Anth-NSMe (6) binds preferentially through the py moieties, affording the bis-ligated complex [(Anth-NSMe)2Mn(CO)3Br] (10), wherein the thioether-S donors remain unbound. Alternatively, deprotection of the thioether in 6 affords the free thiol ligand Anth-NSH (7), which more readily binds the Mn center. Complexation of 7 ultimately affords the mixed-valence Mn(I)/Mn(II) dimer of formula [(Anth-NS)3Mn2(CO)3] (11), which exhibits a fac-{Mn(CO)3} unit supported by a triad of bridging thiolates, which are in turn ligated to a supporting Mn(II) center (EPR: |D| = 0.053 cm(-1), E/|D| = 0.3, Aiso = -150 MHz). All of the metal complexes have been characterized by single-crystal X-ray diffraction, IR spectroscopy and NMR/EPR measurements-all of which demonstrate that the meta-linked, anthracene-based ligand scaffold is a viable approach for the coordination of metal carbonyls.

Photo-activated CO-releasing molecules (PhotoCORMs) of robust sawhorse scaffolds [μ(2)-OOCR(1), η(1)-NH2CHR(2)(C = O] OCH3, Ru(I)2CO4]

A class of sawhorse-type ruthenium(i) complexes featuring a stable CORM sphere with diverse carboxylic and amino acid derivatives were synthesized and validated as lead structures for photo-activated CO-releasing molecules (PhotoCORMs). The CO release of these CORMs was triggered by 365 nm UV irradiation. Cell viability studies indicated that 3a and 3f were non-toxic both in the dark and in UV light, making them excellent lead structures for therapeutic CORMs.

Red-light activated photoCORMs of Mn(i) species bearing electron deficient 2,2′-azopyridines

A family of carbonyl Mn(i) complexes capable of releasing CO when triggered with red light (≥ 625 nm) is reported. The species are activated by irradiation of their MLCT bands in the 630–690 nm range.

PhotoCORMs: CO release moves into the visible

The potential of carbon monoxide to act as a therapeutic agent is now well-established. In this Perspective, we examine the growth of photoCORMs from their origins in the photophysics of metal carbonyls to the latest visible-light agents.

Transition-Metal-Free CO-Releasing BODIPY Derivatives Activatable by Visible to NIR Light as Promising Bioactive Molecules

Carbon monoxide-releasing molecules (CORMs) are chemical agents used to administer CO as an endogenous, biologically active molecule. A precise spatial and temporal control over the CO release is the major requirement for their applications. Here, we report the synthesis and properties of a new generation of transition-metal-free carbon monoxide-releasing molecules based on BODIPY chromophores (COR-BDPs) activatable by visible-to-NIR (up to 730 nm) light. We demonstrate their performance for both in vitro and in vivo experimental settings, and we propose the mechanism of the CO release based on steady-state and transient spectroscopy experiments and quantum chemical calculations.

CORM-EDE1: A Highly Water-Soluble and Nontoxic Manganese-Based photoCORM with a Biogenic Ligand Sphere

[Mn(CO)5Br] reacts with cysteamine and 4-amino-thiophenyl with a ratio of 2:3 in refluxing tetrahydrofuran to the complexes of the type [{(OC)3Mn}2(μ-SCH2CH2NH3)3]Br2 (1, CORM-EDE1) and [{(OC)3Mn}2(μ-SC6H4-4-NH3)3]Br2 (2, CORM-EDE2). Compound 2 precipitates during refluxing of the tetrahydrofuran solution as a yellow solid whereas 1 forms a red oil that slowly solidifies. Recrystallization of 2 from water yields the HBr-free complex [{(OC)3Mn}2(μ-S-C6H4-4-NH2)2(μ-SC6H4-4-NH3)] (3). The n-propylthiolate ligand (which is isoelectronic to the bridging thiolate of 1) leads to the formation of the di- and tetranuclear complexes [(OC)4Mn(μ-S-nPr)2]2 and [(OC)3Mn(μ-S-nPr)]4. CORM-EDE1 possesses ideal properties to administer carbon monoxide to biological and medicinal tissues upon irradiation (photoCORM). Isolated crystalline CORM-EDE1 can be handled at ambient and aerobic conditions. This complex is nontoxic, highly soluble in water, and indefinitely stable therein in the absence of air and phosphate buffer. CORM-EDE1 is stable as frozen stock in aqueous solution without any limitations, and these stock solutions maintain their CO release properties. The reducing dithionite does not interact with CORM-EDE1, and therefore, the myoglobin assay represents a valuable tool to study the release kinetics of this photoCORM. After CO liberation, the formation of MnHPO4 in aqueous buffer solution can be verified.