Aggregation-Induced Emissive Copper(I) Complexes for Living Cell Imaging

Unveiling mechanistic insights and applications of aggregation-enhanced emission (AEE)-active polynuclear transition metal complexes

Aggregation-enhanced emission (AEE) in polynuclear transition metal complexes (PTMCs) represents a major advancement in luminescent materials, overcoming the limitations of aggregation-caused quenching (ACQ) in traditional systems. Unlike conventional materials that suffer from quenching, AEE-active PTMCs exhibit enhanced luminescence in the aggregated state, driven by mechanisms such as restricted molecular motion, π-π stacking, and metal-metal interactions. These properties make PTMCs highly versatile for applications including chemical sensing, bioimaging, photodynamic therapy (PDT), optoelectronics (e.g., OLEDs, WOLEDs, and LEDs), and security technologies (e.g., anti-counterfeiting inks). They enable the sensitive detection of pollutants, facilitate high-performance bioimaging, and enhance the efficiency of energy devices. However, PTMCs face several challenges, including complex synthesis, limited thermal and photostability, solubility issues, and environmental and toxicity concerns. Additionally, high production costs, instability in different media, and the need for optimized energy transfer efficiency must be addressed to enhance their practical performance. This review explores the mechanisms behind AEE in PTMCs and discusses strategies for overcoming these challenges, including ligand engineering, hybrid material development, and sustainable synthesis methods. It also highlights their potential in advancing energy-efficient technologies, precision therapeutics, and secure communication systems, contributing to a more sustainable and innovative future.

Phosphorescent Sensor Based on Iridium(III) Complex with Aggregation-Induced Emission Activity for Facile Detection of Volatile Acids

Phosphorescent sensors are essential for rapid visual sensing of volatile acids, due to their profound impact on ecosystems and human health. However, solid phosphorescent materials for acid-base stimulus response are still rare, and it is important to achieve real-time monitoring of volatile acids. In order to obtain an efficient and rapid response to volatile acid stimulation, N-H and -NH2 substituents are introduced into an auxiliary ligand to synthesize a new cationic Ir(III) complex (Ir-NH). The AIE property of Ir-NH leads to enhanced emission in the aggregated state, which facilitates the construction of solid-state acid-base sensors. More importantly, due to the introduction of -NH2 and N-H in the molecular structure, reversible switching of the emission color of Ir-NH under acid-base stimulation was successfully achieved. A convenient and efficient sensing device for volatile acid monitoring was prepared using Ir-NH as the active material. Our results provide a new strategy for designing phosphorescent materials with AIE and acid-base stimulus-responsive properties.

Structural and Photophysical Differences in Crystalline Trigonal Planar Copper Iodide Complexes with 1,2-Bis(methylpyridin-2-yl)disilane Ligands

We synthesized trigonal planar Cu(I) iodide complexes with 1,2-bis(methylpyridin-2-yl)disilane ligands L1-L4 and investigated how the substitution position of the methyl group on the pyridine ring in σ-π conjugation affects their structure and physical properties. The structures were characterized by NMR, elemental analysis, and single-crystal X-ray diffraction. In the crystalline state, the methylpyridyl groups of CuIL1-CuIL3 were coordinated with Cu(I) in an anticlinal conformation relative to the Si-Si σ bond, whereas those of CuIL4 were coordinated with Cu(I) in a synperiplanar conformation relative to the Si-Si σ bond. The conformational difference in the crystalline state was influenced by the N-Cu-N bite angle and the emission wavelength. CuIL1-CuIL3 exhibited blue-green emission (λem: 476-494 nm), and CuIL4 exhibited green-yellow emission (λem: 512 nm) with high emission quantum yields (Φ: 0.59-0.86) in the crystalline state at 293 K. These Cu(I) complexes exhibited thermally activated delayed fluorescence from the S1 state at 293 K and phosphorescence from the T1 state at 77 K in the crystalline state. The optical properties in the crystalline state were discussed by DFT and TD-DFT calculations. These complexes also displayed aggregation-induced emission in THF-water solution (fw > 80%), although they did not show emission in dehydrated THF.

Shining New Light on Biological Systems: Luminescent Transition Metal Complexes for Bioimaging and Biosensing Applications

Luminescence imaging is a powerful and versatile technique for investigating cell physiology and pathology in living systems, making significant contributions to life science research and clinical diagnosis. In recent years, luminescent transition metal complexes have gained significant attention for diagnostic and therapeutic applications due to their unique photophysical and photochemical properties. In this Review, we provide a comprehensive overview of the recent development of luminescent transition metal complexes for bioimaging and biosensing applications, with a focus on transition metal centers with a d6, d8, and d10 electronic configuration. We elucidate the structure-property relationships of luminescent transition metal complexes, exploring how their structural characteristics can be manipulated to control their biological behavior such as cellular uptake, localization, biocompatibility, pharmacokinetics, and biodistribution. Furthermore, we introduce the various design strategies that leverage the interesting photophysical properties of luminescent transition metal complexes for a wide variety of biological applications, including autofluorescence-free imaging, multimodal imaging, organelle imaging, biological sensing, microenvironment monitoring, bioorthogonal labeling, bacterial imaging, and cell viability assessment. Finally, we provide insights into the challenges and perspectives of luminescent transition metal complexes for bioimaging and biosensing applications, as well as their use in disease diagnosis and treatment evaluation.

New Calamitic Mesogens Exhibiting Aggregation-Induced Emission (AIE)

Aggregation-induced emitters or AIEgens are generally signified by their stronger photoluminescence in aggregation than in the solution state. Due to high emission efficiency in aggregate and solid states and good processability, organic AIEgens drew attention to the development of advanced luminescent materials. However, as mesogenic materials self-assemble to a different molecular arrangement in different phases, achieving liquid crystallinity and AIE properties in the same molecule would provide a valuable tool to develop solvent-independent AIEgenic materials. With this goal, the present work reports the synthesis of new organic thermotropic liquid crystalline compounds exhibiting aggregation-induced emission (AIE). The synthesized compounds exhibit strong green luminescence in a solid state which sharply quenches upon entering smectic mesophase by heating. This is in addition to the exhibition of dispersion medium (solvent)-dependent emission, thus providing a dual mode of AIE. The mesogenic property of the synthesized compounds was studied by XRD, POM, and DSC. The AIE was studied by fluorescence spectroscopy and variable temperature fluorescence microscopy. A DFT study was carried out to gain an insight into the AIEgenic behavior of the material.

Luminescent Water-Dispersible Nanoparticles Engineered from Copper(I) Halide Cluster Core and P,N-Ligand with an Optimal Balance between Stability and ROS Generation

The present work introduces the solvent exchange procedure as a route for conversion of the Cu4I4L2 complex, where the Cu4I4 cluster core is coordinated with two P,N-ligands (L), into an aqueous colloid. The analysis of both colloidal and supernatant phases revealed some losses in CuI going from the initial Cu4I4L2 complex to Cu2I2L3-based nanoparticles. The comparative analysis of IR, 31P NMR spectroscopy, ESI mass-spectrometry and luminescence data argued for a contribution of the “butterfly”-like structures of the Cu2I2 cluster core to Cu2I2L3-based nanoparticles, although the amorphous nature of the latter restricted structure evaluation from the PXRD data. The green luminescence of the colloids revealed their chemical stability under pH variations in the solutions of some amino acids and peptides, and to specify the temperature and concentration conditions triggering the oxidative degradation of the nanoparticles. The spin trap-facilitated ESR study indicated that the oxidative transformations were followed by the generation of reactive oxygen species (ROS). The physiological temperature level (310 K) enhanced the ROS generation by nanoparticles, but the ROS level was suppressed in the solution of GSH at pH = 7.0. The cytotoxicity of nanoparticles was evaluated in the M-HeLa cell line and is discussed in correlation with their cell internalization and intracellular oxidative transformations.

Aggregation-induced emission enhancement (AIEE) of tetrarhenium(I) metallacycles and their application as luminescent sensors for nitroaromatics and antibiotics

The self-assembly of tetrarhenium metallacycles [{Re(CO)₃}₂(μ-dhaq)(μ-N-N)]₂ (3a, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene; 3b, N-N = 1,3-bis(1-octylbenzimidazol-2-yl)benzene), (H₂-dhaq = 1,4-dihydroxy-9,10-anthraquinone) and [{Re(CO)₃}₂(μ-thaq)(μ-N-N)]₂ (4, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene), (H₂-thaq = 1,2,4-trihydroxy-9,10-anthraquinone) under solvothermal conditions is described. The metallacycles 3a,b and 4 underwent aggregation-induced emission enhancement (AIEE) in THF upon the incremental addition of water. TEM images revealed that metallacycle 3a in a 60% aqueous THF solution formed rectangular aggregates with a wide size distribution, while a 90% aqueous THF solution resulted in the formation of a mixture of nanorods and amorphous aggregates due to rapid and abrupt aggregation. UV-vis and emission spectral profiles supported the formation of nanoaggregates of metallacycles 3a,b and 4 upon the gradual addition of water to a THF solution containing metallacycles. Further studies indicated that these nanoaggregates were excellent probes for the sensitive and selective detection of nitro group containing picric acid (PA) derivatives as well as antibiotics.

Effects of functional groups and side chains on assembly of "X"-shaped new aggregation-induced emission molecules

The self-assembly properties of aggregation-induced emission molecules play important roles in electroluminescence devices and fluorescence sensors because noncovalent interactions in self-assembly structures would accelerate the excitation energy consumption. However, there are only few studies to explore their self-assembly properties on the interface and there is still a great need for further understanding self-assembled mechanisms from the viewpoint of molecular design. Here, we presented three X-shaped aggregation-induced emission molecules X1, X2 and X3, which decorated with different functional groups and alkyl side chains. The self-assembly structures were revealed by scanning tunneling microscopy technique in combination with density functional theory. Results showed that X-shaped molecules self-assembled into different structures, depending on their molecular structure, especially the functional groups. Furthermore, self-assembly structures could be regulated by adjusting solution concentration. In more detail, parallel with gradually increasing solution concentration, the molecules approached closer and molecule-molecule interactions were enhanced, finally resulting in new nanostructures. The self-assembly properties of three X-shaped aggregation-induced emission molecules on the liquid/solid interface would give a guidance for further exploring the aggregation state in three-dimensional space. Meanwhile, the two-dimensional nanostructures might show special properties, which could be used in fabricating next generation functional films.

A tricolor-switchable stimuli-responsive luminescent binuclear Cu(i) complex with switchable NH⋯O interactions

Blue-green-yellow tricolor luminescence conversion is attributed to the loss and recovery of CH2Cl2 solvent molecules and the destruction and restoration of the orderly packing array caused by the breaking and rebuilding of NH⋯O hydrogen bonds.

Photophysical properties of homobimetallic Cu(i)–Cu(i) and heterobimetallic Cu(i)–Ag(i) complexes of 2-(6-bromo-2-pyridyl)-1H-imidazo[4,5-f][1,10]phenanthroline

The heteronuclear Cu(i)–Ag(i) complexes show dual emission bands and enhanced luminescence compared with their isostructural homobinuclear Cu(i) complexes.

A Mechanochromic and Vapochromic Luminescent Cuprous Complex Based on a Switchable Intramolecular π···π Interaction

An in-depth study on a stimuli-responsive tetranuclear cuprous luminescent complex is reported and gives new insights into the origin and possible use of the observed stimuli-responsive luminescence. Its crystalline polymorphs with two different shapes are obtained by using different crystallization solvents and show distinct emissions, with one being blue emissive and the other being yellow emissive. Upon grinding, only the blue-emitting polymorph has a marked change in the emission color from blue to yellow, and its ground sample exhibits a yellow emission similar to that of the yellow-emitting polymorph. Interestingly, the yellow-emitting polymorph after exposure to acetone vapor can emit a blue emission and display luminescence mechanochromism similar to that of the blue-emitting polymorph. Single-crystal structural analyses of the two different polymorphs reveal the relationship between the mechanochromic luminescence and the geometrical configuration of the {Cu(μ-dppm)₂Cu} unit and intramolecular "pyridyl/phenyl" π···π interactions, supported as well by their PXRD, FT-IR, TGA, and PL studies in various states and by TD-DFT analyses. The results demonstrate the different roles of switchable intramolecular π···π interactions and the geometrical configuration of the {Cu(μ-dppm)₂Cu} unit in this stimuli-responsive luminescence and potential applications of such stimuli-responsive luminescence in optical sensing and anticounterfeiting encryption technologies and deepen the understanding of such stimuli-responsive luminescence originating from switchable intramolecular π···π interactions. In addition, it is clearly suggested that the rational utilization of switchable intramolecular π···π interactions is a feasible route for developing stimuli-responsive intelligent luminescent materials and devices.

Metal-Based Aggregation-Induced Emission Theranostic Systems

Efficient theranostic systems can realize better outcomes in disease treatment because of precise diagnosis and the concomitant effective therapy. Aggregation-induced emission luminogens (AIEgens) are a unique type of organic emitters with intriguing photophysical properties in the aggregate state. Among the AIEgens studied for biomedical applications, so far, metal-based AIE systems have shown great potential in theranostics due to the enhanced multimodal bioimaging ability and therapeutic effect. This research field has been growing rapidly, and many rationally designed systems with promising activities to cancer and other diseases have been reported recently. In this review, we summarized the recent progress of metal-based AIE materials in bioimaging and biological theranostics, and deciphered the pertinent design strategies. We hope that this review can offer new insights into the development of this growing field.

Ag(i) and Cu(i) cyclic-triimidazole coordination polymers: revealing different deactivation channels for multiple room temperature phosphorescences

The photophysics of isostructural Ag(i) and Cu(i) 1D and 3D coordination polymers based on cyclic triimidazole reveals excitation wavelength-dependent multiple emissions with different radiative paths according to the coordinated metal.

Luminescent Dinuclear Copper(I) Complexes Bearing an Imidazolylpyrimidine Bridging Ligand

The synthesis and photophysical study of two dinuclear copper(I) complexes bearing a 2-(1H-imidazol-2-yl)pyrimidine bridging ligand are described. The tetrahedral coordination sphere of each copper center is completed through the use of a bulky bis(phosphine) ligand, either DPEphos or Xantphos. Temperature-dependent photophysical studies demonstrated emission through a combination of phosphorescence and thermally activated delayed fluorescence for both complexes, and an intense emission (Φ_PL = 46%) was observed for a crystalline sample of one of the complexes reported. The photophysics of these two complexes is very sensitive to the environment. Two pseudopolymorphs of one of the dinuclear complexes were isolated, with distinct photophysics. The emission color of the crystals can be changed by grinding, and the differences in their photophysics before and after grinding are discussed.

Blue-shifted aggregation-induced enhancement of a Sn(iv) fluoride complex: the role of fluorine in luminescence enhancement

A new type of blue-shifted aggregation-induced emission enhancement was observed for a Sn(iv) fluoride complex, resulting in strong emission in the solid state as compared with that in solutions. The fluorinated Sn(iv) complex has a significantly more intense emission efficiency compared to the chlorinated Sn(iv) complex, which is attributed to stronger σ bonding.

Heteroleptic [Cu(P^P)(N^N)][PF6] Compounds with Isomeric Dibromo-1,10-Phenanthroline Ligands

A series of [Cu(P^P)(N^N)][PF6] compounds are reported in which N^N is 2,9-dibromo-1,10-phenanthroline (2,9-Br2phen), 3,8-dibromo-1,10-phenanthroline (3,8-Br2phen) or 4,7-dibromo-1,10-phenanthroline (4,7-Br2phen) and P^P is bis(2-(diphenylphosphano)phenyl)ether (POP) or 4,5-bis(diphenylphosphano)-9,9-dimethylxanthene (xantphos). The compounds were characterized by solution multinuclear NMR spectroscopy, mass spectrometry and a single-crystal X-ray analysis. Each compound underwent a partially reversible or irreversible copper-centred oxidation, the highest potential being for 2,9-Br2phen-containing compounds. In solution, the compounds are weak yellow or orange emitters, whereas powdered samples exhibit yellow emissions with photoluminescence quantum yields of up to 45% for [Cu(xantphos)(2,9-Br2phen)][PF6] with an excited state lifetime τ1/2 = 9.9 μs. Values of λemmax for [Cu(POP)(2,9-Br2phen)][PF6] and [Cu(xantphos)(2,9-Br2phen)][PF6] are blue-shifted with respect to compounds with the 3,8-and 4,7-isomers, both in solution and in the solid state.

Terahertz time-domain absorption spectra of Cu(i) complexes bearing tetraphosphine ligands: the bridge between the C–H⋯π and π⋯π interactions and photoluminescence properties

The terahertz spectrum bridges the luminescence and C–H⋯π and π⋯π interactions of Cu(i) complexes.

Heterobimetallic copper(i) complexes bearing both 1,1′-bis(diphenylphosphino)ferrocene and functionalized 3-(2′-pyridyl)-1,2,4-triazole

Copper(i) 1,1′-bis(diphenylphosphino)ferrocene complexes are well regulated by functional 3-(2′-pyridyl)-1,2,4-triazole exhibiting mono-anionic η²(N1,N2) and neutral η²(N1,N2) and η²(N1,N4) chelating modes.

Naked-eye repeatable off–on–off and on–off–on switching luminescence of copper(i)-1H-imidazo[4,5-f][1,10]phenanthroline complexes with reversible acid–base responses

Repeatable off–on–off or on–off–on luminescence of a series of Cu(i) complexes is observed with reversible base–acid or acid–base responses.

New discovery in crystallography: correlation of terahertz time-domain spectra with crystal structures and photoluminescence properties of mononuclear/binuclear diimine–Cu(i)-phosphine complexes

A method was provided for qualitatively determining the photoluminescence quantum yield of diimine–Cu(i) complex by the waveform of terahertz time-domain spectroscopy.

Insights into the aggregation-induced emission of 1,8-naphthalimide-based supramolecular hydrogels

The study of aggregation-induced emission (AIE) of a series of 1,8-naphthalimide derivatives in aqueous media is reported herein. Some of these molecules constitute the first examples of 1,8-naphthalimide-containing amino acid derivatives that form hydrogels with excellent photophysical and mechanical properties. The present study provides further insights for the rational design of water-compatible stimuli-responsive photonic materials presenting AIE. AIE was quantitatively evaluated by measuring the fluorescence quantum yields of the molecules. Gelators 1 and 2 exhibit self-assembled fibrillar morphologies and present the best performance regarding the AIE effect, showing a remarkable enhancement in fluorescence intensity of 4700% and reaching a notable fluorescence quantum yield (Φf) of 30%. Non-gelator molecules 6 and 7 form nanoparticles, which also present AIE, but with emissions corresponding to their excimers. Therefore, the AIE intensity and wavelength are regulated by the type of aggregate morphology: fibers, nanoparticles or soluble species.

Photoluminescence properties of TADF-emitting three-coordinate silver(i) halide complexes with diphosphine ligands: a comparison study with copper(i) complexes

A series of three- and four-coordinate silver(i) halide complexes exhibiting efficient blue thermally activated delayed fluorescence have been prepared.

Synthesis, structure, and photophysics of copper(i) triphenylphosphine complexes with functionalized 3-(2′-pyrimidinyl)-1,2,4-triazole ligands

The use of CF₃ group can enhance the solid-state luminescence of 1,2,4-triazole-based Cu(i) complexes but the use of Bu^t and pyrimidinyl groups and the 1,2,4-triazolyl-NH deprotonation do not favor this.