1
|
Otvagina KV, Maslov AA, Fukina DG, Petukhov AN, Malysheva YB, Vorotyntsev AV, Sazanova TS, Atlaskin AA, Kapinos AA, Barysheva AV, Suvorov SS, Zanozin ID, Dokin ES, Vorotyntsev IV, Kazarina OV. The Influence of Polycation and Counter-Anion Nature on the Properties of Poly(ionic liquid)-Based Membranes for CO 2 Separation. MEMBRANES 2023; 13:539. [PMID: 37367743 DOI: 10.3390/membranes13060539] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/07/2023] [Revised: 05/08/2023] [Accepted: 05/15/2023] [Indexed: 06/28/2023]
Abstract
The current investigation is focused on the development of composite membranes based on polymeric ionic liquids (PILs) containing imidazolium and pyridinium polycations with various counterions, including hexafluorophosphate, tetrafluoroborate, and bis(trifluoromethylsulfonyl)imide. A combination of spectroscopic methods was used to identify the synthesized PILs and characterize their interaction with carbon dioxide. The density and surface free energy of polymers were performed by wettability measurements, and the results are in good agreement with the permeability and selectivity obtained within the gas transport tests. It was shown that the membranes with a selective layer based on PILs exhibit relatively high permeability with CO2 and high ideal selectivity CO2/CH4 and CO2/N2. Additionally, it was found that the type of an anion significantly affects the performance of the obtained membranes, with the most pronounced effect from bis-triflimide-based polymers, showing the highest permeability coefficient. These results provide valuable insights into the design and optimization of PIL-based membranes for natural and flue gas treatment.
Collapse
Affiliation(s)
- Ksenia V Otvagina
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Alexey A Maslov
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Diana G Fukina
- Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Anton N Petukhov
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
- Laboratory of SMART Polymeric Materials and Technologies, Mendeleev University of Chemical Technology, 9 Miusskaya Square, 125047 Moscow, Russia
| | - Yulia B Malysheva
- Organic Chemistry Department, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Andrey V Vorotyntsev
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Tatyana S Sazanova
- Laboratory of SMART Polymeric Materials and Technologies, Mendeleev University of Chemical Technology, 9 Miusskaya Square, 125047 Moscow, Russia
- Laboratory of Membrane and Catalytic Processes, Nizhny Novgorod State Technical University n.a. R.E. Alekseev, 24 Minin Street, 603950 Nizhny Novgorod, Russia
- Laboratory of Ionic Materials, Mendeleev University of Chemical Technology, 9 Miusskaya Square, 125047 Moscow, Russia
| | - Artem A Atlaskin
- Laboratory of SMART Polymeric Materials and Technologies, Mendeleev University of Chemical Technology, 9 Miusskaya Square, 125047 Moscow, Russia
| | - Alexander A Kapinos
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Alexandra V Barysheva
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Sergey S Suvorov
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Ivan D Zanozin
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Egor S Dokin
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
| | - Ilya V Vorotyntsev
- Laboratory of SMART Polymeric Materials and Technologies, Mendeleev University of Chemical Technology, 9 Miusskaya Square, 125047 Moscow, Russia
| | - Olga V Kazarina
- Chemical Engineering Laboratory, Research Institute for Chemistry, N.I. Lobachevsky State University of Nizhny Novgorod, 23 Gagarin Avenue, 603950 Nizhny Novgorod, Russia
- Laboratory of Membrane and Catalytic Processes, Nizhny Novgorod State Technical University n.a. R.E. Alekseev, 24 Minin Street, 603950 Nizhny Novgorod, Russia
- Laboratory of Ionic Materials, Mendeleev University of Chemical Technology, 9 Miusskaya Square, 125047 Moscow, Russia
| |
Collapse
|
2
|
Xiao L, Lai Y, Zhao R, Song Q, Cai J, Yin X, Zhao Y, Hou L. Ionic Conjugated Polymers as Heterogeneous Catalysts for the Cycloaddition of Carbon Dioxide to Epoxides to Form Carbonates under Solvent- and Cocatalyst-Free Conditions. Chempluschem 2022; 87:e202200324. [PMID: 36420867 DOI: 10.1002/cplu.202200324] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2022] [Revised: 10/17/2022] [Indexed: 01/31/2023]
Abstract
The generation of cyclic carbonates by the cycloaddition of CO2 with epoxides is attractive in the industry, by which CO2 is efficiently used as C1 source. Herein, a series of catalysts were developed to efficient mediate the cycloaddition of CO2 with epoxides to generate carbonates. The catalysts were easily synthesized via the amine-formaldehyde condensation of ethidium bromide with a variety of linkers. The newly prepared heterogeneous catalysts have high thermal stability and degradation temperatures. The surface of the catalysts is smooth and spherical in shape. The effect of temperature, pressure, reaction time and catalyst dosage on the cycloaddition of CO2 with epoxide were investigated. The results show that the catalyst with 1,3,5-tris(4-formylphenyl)benzene as the linker can achieve 97.4 % conversion efficiency at the conditions of 100 °C, reaction time of 12 h, and the reaction pressure of 1.2 MPa in a solvent-free environment. Notably, the polymers serve as homogeneous catalysts during the reaction (reaction temperature above Tg ) and can be separated and recovered easily as homogeneous catalysts at room temperature. In addition, the catalyst is not only suitable for a wide range of epoxide substrates, but also can be recycled many times. Furthermore, DFT calculations show that the coordination between the electrophilic center of the catalyst and the epoxide reduces the energy barrier, and the reaction mechanism is proposed based on the reaction kinetic studies and DFT calculations.
Collapse
Affiliation(s)
- Longqiang Xiao
- Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China.,Qingyuan Innovation Laboratory, Quanzhou, 362801(P. R., China
| | - Yiming Lai
- Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Rui Zhao
- Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China.,Qingyuan Innovation Laboratory, Quanzhou, 362801(P. R., China
| | - Qianyu Song
- Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Jingyu Cai
- Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China.,Qingyuan Innovation Laboratory, Quanzhou, 362801(P. R., China
| | - Xiangyu Yin
- Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Yulai Zhao
- Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Linxi Hou
- Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China.,Qingyuan Innovation Laboratory, Quanzhou, 362801(P. R., China.,Fujian Key Laboratory of Advanced Manufacturing Technology of Specialty Chemicals, Fuzhou University, Fuzhou, 350116, P. R. China
| |
Collapse
|
3
|
da Luz M, Dias G, Zimmer H, Bernard FL, do Nascimento JF, Einloft S. Poly(ionic liquid)s-based polyurethane blends: effect of polyols structure and ILs counter cations in CO2 sorption performance of PILs physical blends. Polym Bull (Berl) 2022. [DOI: 10.1007/s00289-021-03799-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
4
|
Dong Y, Zhao X, Peng C, Zhao R, Zhang Y, Zhao P, Xu X, Yin J. Enhanced electrorheological effectiveness and temperature effect of suspensions based on poly(ionic liquid)s neutralized with mixed counterions. POLYMER 2022. [DOI: 10.1016/j.polymer.2022.125152] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
5
|
Noorani N, Mehrdad A, Ahadzadeh I, Sefidehkhan PS. Carbon dioxide adsorption onto modified polyvinyl chloride with ionic liquid. JOURNAL OF POLYMER ENGINEERING 2022. [DOI: 10.1515/polyeng-2021-0332] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
To modify polyvinylchloride membranes for carbon dioxide gas separation, six polyvinyl chloride-g-polyionic liquid ionomers such as polyvinylchloride-g-poly1-vinyl-3-hexylimidazolium bromide (PVC-g-P[VHIm][Br]), polyvinylchloride-g-poly1-vinyl-3-hexylimidazolium thiocyanate (PVC-g-P[VHIm][SCN]), polyvinylchloride-g-poly1-vinyl-3-hexylimidazolium tetrafluoroborate (PVC-g-P[VHIm][ BF4]), polyvinylchloride-g-poly1-vinyl-3-octylimidazolium bromide (PVC-g-P[VOIm][Br]), polyvinylchloride-g-poly1-vinyl-3-octylimidazolium thiocyanate (PVC-g-P[VOIm][SCN]) and polyvinylchloride-g-poly1-vinyl-3-octylimidazolium tetrafluoroborate (PVC-g-P[VOIm][ BF4]) were synthesized. The polyvinyl chloride-g-polyionic liquid ionomers were characterized using elemental analyzer (CHN) and Fourier transform infrared spectroscopy (FTIR) techniques. CO2 adsorption onto these ionomers was measured by quartz crystal microbalance (QCM) and the experimental data were correlated by the sorption model. The parameters obtained imply that CO2 adsorption has an exothermic and physisorption nature. Also, the investigations point to that the PVC-g-P[VHIm][SCN] has better performance for CO2 separation.
Collapse
Affiliation(s)
- Narmin Noorani
- Department of Physical Chemistry, Faculty of Chemistry , University of Tabriz , Tabriz 51666 , Iran
| | - Abbas Mehrdad
- Department of Physical Chemistry, Faculty of Chemistry , University of Tabriz , Tabriz 51666 , Iran
| | - Iraj Ahadzadeh
- Department of Physical Chemistry, Faculty of Chemistry , University of Tabriz , Tabriz 51666 , Iran
| | | |
Collapse
|
6
|
Zunita M, Hastuti R, Alamsyah A, Khoiruddin K, Wenten IG. Ionic Liquid Membrane for Carbon Capture and Separation. SEPARATION & PURIFICATION REVIEWS 2022. [DOI: 10.1080/15422119.2021.1920428] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
Affiliation(s)
- M. Zunita
- Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung Jl, West Java, Bandung, Indonesia
| | - R. Hastuti
- Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung Jl, West Java, Bandung, Indonesia
| | - A. Alamsyah
- Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung Jl, West Java, Bandung, Indonesia
| | - K. Khoiruddin
- Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung Jl, West Java, Bandung, Indonesia
| | - I. G. Wenten
- Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung Jl, West Java, Bandung, Indonesia
- Research Center for Nanosciences and Nanotechnology, Institut Teknologi Bandung Jl, West Java, Bandung, Indonesia
| |
Collapse
|
7
|
Galiano F, Mancuso R, Guazzelli L, Mauri M, Chiappe C, Simonutti R, Brunetti A, Pomelli CS, Barbieri G, Gabriele B, Figoli A. Phosphonium ionic liquid-polyacrylate copolymer membranes for improved CO2 separations. J Memb Sci 2021. [DOI: 10.1016/j.memsci.2021.119479] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
8
|
CO2 adsorption onto 1-butyl-3-vinylimidazolium based poly(ionic liquid)s: experimental and theoretical studies. JOURNAL OF POLYMER RESEARCH 2021. [DOI: 10.1007/s10965-021-02695-8] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
9
|
Atlaskina ME, Kazarina OV, Mochalova AE, Vorotyntsev IV. Synthesis of Monomeric Ionic Liquids Based on 4-Vinylbenzyl Chloride as Precursors of a Material for the Selective Layer of Gas Separation Membranes. MEMBRANES AND MEMBRANE TECHNOLOGIES 2021. [DOI: 10.1134/s2517751621010030] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/23/2023]
|
10
|
Friess K, Izák P, Kárászová M, Pasichnyk M, Lanč M, Nikolaeva D, Luis P, Jansen JC. A Review on Ionic Liquid Gas Separation Membranes. MEMBRANES 2021; 11:97. [PMID: 33573138 PMCID: PMC7911519 DOI: 10.3390/membranes11020097] [Citation(s) in RCA: 39] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/04/2021] [Revised: 01/25/2021] [Accepted: 01/25/2021] [Indexed: 02/02/2023]
Abstract
Ionic liquids have attracted the attention of the industry and research community as versatile solvents with unique properties, such as ionic conductivity, low volatility, high solubility of gases and vapors, thermal stability, and the possibility to combine anions and cations to yield an almost endless list of different structures. These features open perspectives for numerous applications, such as the reaction medium for chemical synthesis, electrolytes for batteries, solvent for gas sorption processes, and also membranes for gas separation. In the search for better-performing membrane materials and membranes for gas and vapor separation, ionic liquids have been investigated extensively in the last decade and a half. This review gives a complete overview of the main developments in the field of ionic liquid membranes since their first introduction. It covers all different materials, membrane types, their preparation, pure and mixed gas transport properties, and examples of potential gas separation applications. Special systems will also be discussed, including facilitated transport membranes and mixed matrix membranes. The main strengths and weaknesses of the different membrane types will be discussed, subdividing them into supported ionic liquid membranes (SILMs), poly(ionic liquids) or polymerized ionic liquids (PILs), polymer/ionic liquid blends (physically or chemically cross-linked 'ion-gels'), and PIL/IL blends. Since membrane processes are advancing as an energy-efficient alternative to traditional separation processes, having shown promising results for complex new separation challenges like carbon capture as well, they may be the key to developing a more sustainable future society. In this light, this review presents the state-of-the-art of ionic liquid membranes, to analyze their potential in the gas separation processes of the future.
Collapse
Affiliation(s)
- Karel Friess
- Department of Physical Chemistry, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague, Czech Republic; (K.F.); (P.I.); (M.L.)
- Czech Academy of Sciences, Institute of Chemical Process Fundamentals, Rozvojová 135, 165 02 Prague, Czech Republic; (M.K.); (M.P.)
| | - Pavel Izák
- Department of Physical Chemistry, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague, Czech Republic; (K.F.); (P.I.); (M.L.)
- Czech Academy of Sciences, Institute of Chemical Process Fundamentals, Rozvojová 135, 165 02 Prague, Czech Republic; (M.K.); (M.P.)
| | - Magda Kárászová
- Czech Academy of Sciences, Institute of Chemical Process Fundamentals, Rozvojová 135, 165 02 Prague, Czech Republic; (M.K.); (M.P.)
| | - Mariia Pasichnyk
- Czech Academy of Sciences, Institute of Chemical Process Fundamentals, Rozvojová 135, 165 02 Prague, Czech Republic; (M.K.); (M.P.)
| | - Marek Lanč
- Department of Physical Chemistry, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague, Czech Republic; (K.F.); (P.I.); (M.L.)
| | - Daria Nikolaeva
- Materials & Process Engineering, UCLouvain, Place Sainte Barbe 2, 1348 Louvain-la-Neuve, Belgium; (D.N.); (P.L.)
| | - Patricia Luis
- Materials & Process Engineering, UCLouvain, Place Sainte Barbe 2, 1348 Louvain-la-Neuve, Belgium; (D.N.); (P.L.)
| | | |
Collapse
|
11
|
Depoorter J, Yan X, Zhang B, Sudre G, Charlot A, Fleury E, Bernard J. All poly(ionic liquid) block copolymer nanoparticles from antagonistic isomeric macromolecular blocks via aqueous RAFT polymerization-induced self-assembly. Polym Chem 2021. [DOI: 10.1039/d0py00698j] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
All-poly(ionic liquid) block copolymer nanoparticles are prepared by aqueous RAFT PISA using a couple of isomeric ionic liquid monomers leading to macromolecular building blocks with antagonistic solution behavior in water.
Collapse
Affiliation(s)
| | - Xibo Yan
- Univ Lyon
- INSA Lyon
- CNRS
- IMP UMR 5223
- Villeurbanne
| | - Biao Zhang
- Univ Lyon
- INSA Lyon
- CNRS
- IMP UMR 5223
- Villeurbanne
| | - Guillaume Sudre
- Univ Lyon
- Université Claude Bernard Lyon 1
- CNRS
- IMP UMR 5223
- Villeurbanne
| | | | | | | |
Collapse
|
12
|
|
13
|
Kim D, Subramanian S, Thirion D, Song Y, Jamal A, Otaibi MS, Yavuz CT. Quaternary ammonium salt grafted nanoporous covalent organic polymer for atmospheric CO2 fixation and cyclic carbonate formation. Catal Today 2020. [DOI: 10.1016/j.cattod.2020.03.050] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
|
14
|
Morozova SM, Lozinskaya EI, Sardon H, Suárez-García F, Vlasov PS, Vaudemont R, Vygodskii YS, Shaplov AS. Ionic Polyureas-A Novel Subclass of Poly(Ionic Liquid)s for CO 2 Capture. MEMBRANES 2020; 10:E240. [PMID: 32961905 PMCID: PMC7558175 DOI: 10.3390/membranes10090240] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/29/2020] [Revised: 08/30/2020] [Accepted: 09/03/2020] [Indexed: 01/31/2023]
Abstract
The growing concern for climate change and global warming has given rise to investigations in various research fields, including one particular area dedicated to the creation of solid sorbents for efficient CO2 capture. In this work, a new family of poly(ionic liquid)s (PILs) comprising cationic polyureas (PURs) with tetrafluoroborate (BF4) anions has been synthesized. Condensation of various diisocyanates with novel ionic diamines and subsequent ion metathesis reaction resulted in high molar mass ionic PURs (Mw = 12 ÷ 173 × 103 g/mol) with high thermal stability (up to 260 °C), glass transition temperatures in the range of 153-286 °C and remarkable CO2 capture (10.5-24.8 mg/g at 0 °C and 1 bar). The CO2 sorption was found to be dependent on the nature of the cation and structure of the diisocyanate. The highest sorption was demonstrated by tetrafluoroborate PUR based on 4,4'-methylene-bis(cyclohexyl isocyanate) diisocyanate and aromatic diamine bearing quinuclidinium cation (24.8 mg/g at 0 °C and 1 bar). It is hoped that the present study will inspire novel design strategies for improving the sorption properties of PILs and the creation of novel effective CO2 sorbents.
Collapse
Affiliation(s)
- Sofia M. Morozova
- A.N. Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS), Vavilov Str. 28, 119991 Moscow, Russia; (S.M.M.); (E.I.L.); (Y.S.V.)
- Laboratory of Solution Chemistry of Advanced Materials and Technologies, ITMO University, Lomonosova str. 9, 191002 St. Petersburg, Russia
| | - Elena I. Lozinskaya
- A.N. Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS), Vavilov Str. 28, 119991 Moscow, Russia; (S.M.M.); (E.I.L.); (Y.S.V.)
| | - Haritz Sardon
- POLYMAT, University of the Basque Country UPV/EHU, Joxe Mari Korta Center, Avda. Tolosa 72, 20018 Donostia-San Sebastian, Spain
| | - Fabian Suárez-García
- Instituto de Ciencia y Tecnología del Carbono, INCAR-CSIC, Francisco Pintado Fe 26, 33011 Oviedo, Spain;
| | - Petr S. Vlasov
- Department of Macromolecular Chemistry, Saint-Petersburg State University, Universitetsky pr. 26, 198504 Saint-Petersburg, Russia;
| | - Régis Vaudemont
- Luxembourg Institute of Science and Technology (LIST), 5 avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg;
| | - Yakov S. Vygodskii
- A.N. Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS), Vavilov Str. 28, 119991 Moscow, Russia; (S.M.M.); (E.I.L.); (Y.S.V.)
| | - Alexander S. Shaplov
- Luxembourg Institute of Science and Technology (LIST), 5 avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg;
| |
Collapse
|
15
|
Mazzei IR, Nikolaeva D, Fuoco A, Loïs S, Fantini S, Monteleone M, Esposito E, Ashtiani SJ, Lanč M, Vopička O, Friess K, Vankelecom IFJ, Jansen JC. Poly[3-ethyl-1-vinyl-imidazolium] diethyl phosphate/Pebax ® 1657 Composite Membranes and Their Gas Separation Performance. MEMBRANES 2020; 10:E224. [PMID: 32911723 PMCID: PMC7560140 DOI: 10.3390/membranes10090224] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/30/2020] [Revised: 08/28/2020] [Accepted: 08/31/2020] [Indexed: 11/29/2022]
Abstract
Poly(ionic liquid)s are an innovative class of materials with promising properties in gas separation processes that can be used to boost the neat polymer performances. Nevertheless, some of their properties such as stability and mechanical strength have to be improved to render them suitable as materials for industrial applications. This work explored, on the one hand, the possibility to improve gas transport and separation properties of the block copolymer Pebax® 1657 by blending it with poly[3-ethyl-1-vinyl-imidazolium] diethyl phosphate (PEVI-DEP). On the other hand, Pebax® 1657 served as a support for the PIL and provided mechanical resistance to the samples. Pebax® 1657/PEVI-DEP composite membranes containing 20, 40, and 60 wt.% of PEVI-DEP were cast from solutions of the right proportion of the two polymers in a water/ethanol mixture. The PEVI-DEP content affected both the morphology of the dense membranes and gas transport through the membranes. These changes were revealed by scanning electron microscopy (SEM), time-lag, and gravimetric sorption measurements. Pebax® 1657 and PEVI-DEP showed similar affinity towards CO2, and its uptake or solubility was not influenced by the amount of PIL in the membrane. Therefore, the addition of the PIL did not lead to improvements in the separation of CO2 from other gases. Importantly, PEVI-DEP (40 wt.%) incorporation affected and improved permeability and selectivity by more than 50% especially for the separation of light gases, e.g., H2/CH4 and H2/CO2, but higher PEVI-DEP concentrations lead to a decline in the transport properties.
Collapse
Affiliation(s)
- Irene R. Mazzei
- Institute on Membrane Technology (CNR-ITM), Via P. Bucci 17/C, 87036 Rende (CS), Italy; (I.R.M.); (M.M.); (E.E.); (J.C.J.)
| | - Daria Nikolaeva
- Membrane Technology Group (MTG), cMACS, Faculty Bio-science Engineering, Celestijnenlaan 200F, 3001 Leuven, Belgium;
| | - Alessio Fuoco
- Institute on Membrane Technology (CNR-ITM), Via P. Bucci 17/C, 87036 Rende (CS), Italy; (I.R.M.); (M.M.); (E.E.); (J.C.J.)
| | - Sandrine Loïs
- SOLVIONIC, Site Bioparc 195, route D’Espagne, BP1169, 31036 Toulouse CEDEX 1, France; (S.L.); (S.F.)
| | - Sébastien Fantini
- SOLVIONIC, Site Bioparc 195, route D’Espagne, BP1169, 31036 Toulouse CEDEX 1, France; (S.L.); (S.F.)
| | - Marcello Monteleone
- Institute on Membrane Technology (CNR-ITM), Via P. Bucci 17/C, 87036 Rende (CS), Italy; (I.R.M.); (M.M.); (E.E.); (J.C.J.)
| | - Elisa Esposito
- Institute on Membrane Technology (CNR-ITM), Via P. Bucci 17/C, 87036 Rende (CS), Italy; (I.R.M.); (M.M.); (E.E.); (J.C.J.)
| | - Saeed Jamali Ashtiani
- Department of Physical Chemistry, University of Chemistry and Technology, Technická 5, 166 28 Prague, Czech Republic; (S.J.A.); (M.L.); (O.V.); (K.F.)
| | - Marek Lanč
- Department of Physical Chemistry, University of Chemistry and Technology, Technická 5, 166 28 Prague, Czech Republic; (S.J.A.); (M.L.); (O.V.); (K.F.)
| | - Ondřej Vopička
- Department of Physical Chemistry, University of Chemistry and Technology, Technická 5, 166 28 Prague, Czech Republic; (S.J.A.); (M.L.); (O.V.); (K.F.)
| | - Karel Friess
- Department of Physical Chemistry, University of Chemistry and Technology, Technická 5, 166 28 Prague, Czech Republic; (S.J.A.); (M.L.); (O.V.); (K.F.)
| | - Ivo F. J. Vankelecom
- Membrane Technology Group (MTG), cMACS, Faculty Bio-science Engineering, Celestijnenlaan 200F, 3001 Leuven, Belgium;
| | - Johannes Carolus Jansen
- Institute on Membrane Technology (CNR-ITM), Via P. Bucci 17/C, 87036 Rende (CS), Italy; (I.R.M.); (M.M.); (E.E.); (J.C.J.)
| |
Collapse
|
16
|
|
17
|
Water Vapour Promotes CO2 Transport in Poly(ionic liquid)/Ionic Liquid-Based Thin-Film Composite Membranes Containing Zinc Salt for Flue Gas Treatment. APPLIED SCIENCES-BASEL 2020. [DOI: 10.3390/app10113859] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
A poly(ionic-liquid) (PIL) matrix can be altered by incorporating additives that will disrupt the polymer chain packing, such as an ionic liquid (IL) and inorganic salts to boost their exploitation as materials for membrane production to be used in CO2 capture. Herein, potential of PIL/IL/salt blends is investigated on the example of poly(diallyldimethyl ammonium) bis(trifluoromethylsulfonyl)imide (P[DADMA][Tf2N]) with N-butyl-N-methyl pyrrolidinium bis(trifluoromethylsulfonyl)imide ([Pyrr14][Tf2N]) and zinc di-bis(trifluoromethylsulfonyl)imide (Zn[Tf2N]2). Composite material with IL and a higher amount of Zn2+ showed an increase in the equilibrium CO2 sorption capacity to 2.77 cm3 (STP)cm −3 bar−1. Prepared blends were successfully processed into thick, dense membranes and thin-film composite membranes. Their CO2 separation efficiency was determined using ideal and mixed-gas feed (vol% CO2 = 50 , dry and with 90% relative humidity). The dominant role of solubility in the transport mechanism is confirmed by combining direct gravimetric sorption measurements and indirect estimations from time-lag experiments. The maximum incorporated amount of Zn2+ salts increased equilibrium solubility selectivity by at least 50% in comparison to the parent PIL. All materials showed increased CO2 permeance values by at least 30% in dry conditions, and 60% in humidified conditions when compared to the parent PIL; the performance of pure PIL remained unchanged upon addition of water vapor to the feed stream. Mixed-gas selectivities for all materials rose by 10% in humidified conditions when compared to dry feed experiments. Our results confirm that the addition of IL improves the performance of PIL-based composites due to lower stiffness of the membrane matrix. The addition of Zn2+-based salt had a marginal effect on CO2 separation efficiency, suggesting that the cation participates in the facilitated transport of CO2.
Collapse
|
18
|
Gillono M, Chiappone A, Mendola L, Gomez Gomez M, Scaltrito L, Pirri CF, Roppolo I. Study on the Printability through Digital Light Processing Technique of Ionic Liquids for CO 2 Capture. Polymers (Basel) 2019; 11:E1932. [PMID: 31771145 PMCID: PMC6960677 DOI: 10.3390/polym11121932] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2019] [Revised: 11/20/2019] [Accepted: 11/20/2019] [Indexed: 01/23/2023] Open
Abstract
Here we present new 3D printable materials based on the introduction of different commercially available ionic liquids (ILs) in the starting formulations. We evaluate the influence of these additives on the printability of such formulations through light-induced 3D printing (digital light processing-DLP), investigating as well the effect of ionic liquids with polymerizable groups. The physical chemical properties of such materials are compared, focusing on the permeability towards CO2 of the different ILs present in the formulations. At last, we show the possibility of 3D printing high complexity structures, which could be the base of new high complexity filters for a more efficient CO2 capture.
Collapse
Affiliation(s)
- Matteo Gillono
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (M.G.); (A.C.); (L.M.); (M.G.G.); (L.S.); (C.F.P.)
- Center for Sustainable Future Technologies @Polito, Istituto Italiano di Tecnologia, Via Livorno 60, 10144 Torino, Italy
| | - Annalisa Chiappone
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (M.G.); (A.C.); (L.M.); (M.G.G.); (L.S.); (C.F.P.)
| | - Lorenzo Mendola
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (M.G.); (A.C.); (L.M.); (M.G.G.); (L.S.); (C.F.P.)
| | - Manuel Gomez Gomez
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (M.G.); (A.C.); (L.M.); (M.G.G.); (L.S.); (C.F.P.)
| | - Luciano Scaltrito
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (M.G.); (A.C.); (L.M.); (M.G.G.); (L.S.); (C.F.P.)
| | - Candido Fabrizio Pirri
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (M.G.); (A.C.); (L.M.); (M.G.G.); (L.S.); (C.F.P.)
- Center for Sustainable Future Technologies @Polito, Istituto Italiano di Tecnologia, Via Livorno 60, 10144 Torino, Italy
| | - Ignazio Roppolo
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (M.G.); (A.C.); (L.M.); (M.G.G.); (L.S.); (C.F.P.)
| |
Collapse
|
19
|
Bara JE, O'Harra KE. Recent Advances in the Design of Ionenes: Toward Convergence with High‐Performance Polymers. MACROMOL CHEM PHYS 2019. [DOI: 10.1002/macp.201900078] [Citation(s) in RCA: 29] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Affiliation(s)
- Jason E. Bara
- Department of Chemical & Biological Engineering University of Alabama Tuscaloosa AL 35487‐0203 USA
| | - Kathryn E. O'Harra
- Department of Chemical & Biological Engineering University of Alabama Tuscaloosa AL 35487‐0203 USA
| |
Collapse
|
20
|
Vollas A, Chouliaras T, Deimede V, Ioannides T, Kallitsis J. New Pyridinium Type Poly(Ionic Liquids) as Membranes for CO₂ Separation. Polymers (Basel) 2018; 10:polym10080912. [PMID: 30960837 PMCID: PMC6403706 DOI: 10.3390/polym10080912] [Citation(s) in RCA: 25] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/08/2018] [Revised: 08/07/2018] [Accepted: 08/09/2018] [Indexed: 11/23/2022] Open
Abstract
New pyridinium based PILs have been prepared by modification of their precursors based on high molecular weight aromatic polyethers bearing main chain pyridine units. The proposed methodology involves the conversion of the precursors to their ionic analogues via N-methylation reaction, followed by anion exchange methathesis reaction to result in PILs with the desirable anions (tetrafluoroborate and bis(trifluoromethylsulfonyl)imide). These PILs show excellent thermal stability, excellent mechanical properties, and most importantly can form very thin, free standing films with minimum thickness of 3 μm. As expected, the PIL containing the TFSI− anion showed improved CO2 and CH4 permeabilities compared to its analogue containing the BF4−. PIL-IL composites membranes have also been prepared using the same PIL and different percentages of pyridinium based IL where it was shown that the membrane with the highest IL weight percentage (45 wt %) showed the highest CO2 permeability (11.8 Barrer) and a high CO2/CH4 ideal selectivity of 35 at room temperature.
Collapse
Affiliation(s)
| | | | - Valadoula Deimede
- Department of Chemistry, University of Patras, GR-26504 Patras, Greece.
| | - Theophilos Ioannides
- Foundation for Research and Technology-Hellas, Institute of Chemical Engineering Sciences (FORTH/ICE-HT), GR-26504 Patras, Greece.
| | - Joannis Kallitsis
- Department of Chemistry, University of Patras, GR-26504 Patras, Greece.
- Foundation for Research and Technology-Hellas, Institute of Chemical Engineering Sciences (FORTH/ICE-HT), GR-26504 Patras, Greece.
| |
Collapse
|
21
|
Dowson GRM, Reed DG, Bellas JM, Charalambous C, Styring P. Fast and selective separation of carbon dioxide from dilute streams by pressure swing adsorption using solid ionic liquids. Faraday Discuss 2018; 192:511-527. [PMID: 27477962 DOI: 10.1039/c6fd00035e] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The need to create a new approach to carbon capture processes that are economically viable has led to the design and synthesis of sorbents that selectively capture carbon dioxide by physisorption. Solid Ionic Liquids (SoILs) were targeted because of their tunable properties and solid form under operational conditions. Molecular modelling was used to identify candidate SoILs and a number of materials based on the low cost, environmentally friendly acetate anion were selected. The materials showed excellent selectivity for carbon dioxide over nitrogen and oxygen and moderate sorption capacity. However, the rate of capture was extremely fast, in the order of a few seconds for a complete adsorb-desorb cycle, under pressure swing conditions from 1 to 10 bar. This showed the importance of rate of sorption cycling over capacity and demonstrates that smaller inventories of sorbents and smaller process equipment are required to capture low concentration CO2 streams. Concentrated CO2 was isolated by releasing the pressure back to atmospheric. The low volatility and thermal stability of SoILs mean that both plant costs and materials costs can be reduced and plant size considerably reduced.
Collapse
Affiliation(s)
- G R M Dowson
- UK Centre for Carbon Dioxide Utilisation, Department of Chemical and Biological Engineering, The University of Sheffield, Sir Robert Hadfield Building, Sheffield, S1 3JD, UK.
| | - D G Reed
- UK Centre for Carbon Dioxide Utilisation, Department of Chemical and Biological Engineering, The University of Sheffield, Sir Robert Hadfield Building, Sheffield, S1 3JD, UK.
| | - J-M Bellas
- UK Centre for Carbon Dioxide Utilisation, Department of Chemical and Biological Engineering, The University of Sheffield, Sir Robert Hadfield Building, Sheffield, S1 3JD, UK.
| | - C Charalambous
- UK Centre for Carbon Dioxide Utilisation, Department of Chemical and Biological Engineering, The University of Sheffield, Sir Robert Hadfield Building, Sheffield, S1 3JD, UK.
| | - P Styring
- UK Centre for Carbon Dioxide Utilisation, Department of Chemical and Biological Engineering, The University of Sheffield, Sir Robert Hadfield Building, Sheffield, S1 3JD, UK.
| |
Collapse
|
22
|
Qian W, Texter J, Yan F. Frontiers in poly(ionic liquid)s: syntheses and applications. Chem Soc Rev 2018; 46:1124-1159. [PMID: 28180218 DOI: 10.1039/c6cs00620e] [Citation(s) in RCA: 498] [Impact Index Per Article: 83.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Abstract
We review recent works on the synthesis and application of poly(ionic liquid)s (PILs). Novel chemical structures, different synthetic strategies and controllable morphologies are introduced as a supplement to PIL systems already reported. The primary properties determining applications, such as ionic conductivity, aqueous solubility, thermodynamic stability and electrochemical/chemical durability, are discussed. Furthermore, the near-term applications of PILs in multiple fields, such as their use in electrochemical energy materials, stimuli-responsive materials, carbon materials, and antimicrobial materials, in catalysis, in sensors, in absorption and in separation materials, as well as several special-interest applications, are described in detail. We also discuss the limitations of PIL applications, efforts to improve PIL physics, and likely future developments.
Collapse
Affiliation(s)
- Wenjing Qian
- Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, P. R. China.
| | - John Texter
- School of Engineering Technology, Eastern Michigan University, Ypsilanti, MI 48197, USA
| | - Feng Yan
- Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, P. R. China.
| |
Collapse
|
23
|
Synthesis and electrochemical studies of new styrenic poly(ionic liquid)s based on the 1-methyl-1,2,3-benzotriazolium cation. RESEARCH ON CHEMICAL INTERMEDIATES 2018. [DOI: 10.1007/s11164-018-3313-4] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
24
|
Dong Y, Liu Y, Wang B, Xiang L, Zhao X, Yin J. Influence of counterion type on dielectric and electrorheological responses of poly(ionic liquid)s. POLYMER 2017. [DOI: 10.1016/j.polymer.2017.11.007] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
25
|
|
26
|
Morozova SM, Shaplov AS, Lozinskaya EI, Mecerreyes D, Sardon H, Zulfiqar S, Suárez-García F, Vygodskii YS. Ionic Polyurethanes as a New Family of Poly(ionic liquid)s for Efficient CO2 Capture. Macromolecules 2017. [DOI: 10.1021/acs.macromol.6b02812] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/30/2023]
Affiliation(s)
- Sofia M. Morozova
- A.N.
Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS), Vavilov Str. 28, 119991, Moscow, Russia
| | - Alexander S. Shaplov
- A.N.
Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS), Vavilov Str. 28, 119991, Moscow, Russia
- Luxembourg Institute of Science and Technology (LIST), 5 avenue des Hauts-Fourneaux, L-4362, Esch-sur-Alzette, Luxembourg
| | - Elena I. Lozinskaya
- A.N.
Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS), Vavilov Str. 28, 119991, Moscow, Russia
| | - David Mecerreyes
- POLYMAT, University of the Basque Country UPV/EHU, Joxe Mari Korta
Center, Avda. Tolosa
72, 20018 Donostia-San
Sebastian, Spain
- IKERBASQUEBasque Foundation for Science, 48013, Bilbao, Spain
| | - Haritz Sardon
- POLYMAT, University of the Basque Country UPV/EHU, Joxe Mari Korta
Center, Avda. Tolosa
72, 20018 Donostia-San
Sebastian, Spain
- IKERBASQUEBasque Foundation for Science, 48013, Bilbao, Spain
| | - Sonia Zulfiqar
- POLYMAT, University of the Basque Country UPV/EHU, Joxe Mari Korta
Center, Avda. Tolosa
72, 20018 Donostia-San
Sebastian, Spain
- Department
of Chemistry, School of Natural Sciences (SNS), National University of Sciences and Technology (NUST), Islamabad 44000, Pakistan
| | | | - Yakov S. Vygodskii
- A.N.
Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS), Vavilov Str. 28, 119991, Moscow, Russia
| |
Collapse
|
27
|
Abstract
AbstractThe emission of carbon dioxide (CO
Collapse
|
28
|
Lu SC, Khan AL, Vankelecom IF. Polysulfone-ionic liquid based membranes for CO2/N2 separation with tunable porous surface features. J Memb Sci 2016. [DOI: 10.1016/j.memsci.2016.06.031] [Citation(s) in RCA: 32] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
29
|
Bernard FL, Polesso BB, Cobalchini FW, Donato AJ, Seferin M, Ligabue R, Chaban VV, do Nascimento JF, Dalla Vecchia F, Einloft S. CO2 capture: Tuning cation-anion interaction in urethane based poly(ionic liquids). POLYMER 2016. [DOI: 10.1016/j.polymer.2016.08.095] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
30
|
Goodwin A, Goodwin KM, Wang W, Yu YG, Lee JS, Mahurin SM, Dai S, Mays JW, Kang NG. Anionic Polymerization of Oxadiazole-Containing 2-Vinylpyridine by Precisely Tuning Nucleophilicity and the Polyelectrolyte Characteristics of the Resulting Polymers. Macromolecules 2016. [DOI: 10.1021/acs.macromol.6b00875] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
Affiliation(s)
- Andrew Goodwin
- Department
of Chemistry, University of Tennessee, Buehler Hall, 1420 Circle Dr., Knoxville, Tennessee 37996, United States
| | - Kimberly M. Goodwin
- Department
of Chemistry, University of Tennessee, Buehler Hall, 1420 Circle Dr., Knoxville, Tennessee 37996, United States
| | - Weiyu Wang
- Department
of Chemistry, University of Tennessee, Buehler Hall, 1420 Circle Dr., Knoxville, Tennessee 37996, United States
| | - Yong-Guen Yu
- School
of Materials Science and Engineering, Gwangju Institute of Science and Technology (GIST), 123 Cheomdangwagi-ro, Buk-gu, Gwangju 61005, Korea
| | - Jae-Suk Lee
- School
of Materials Science and Engineering, Gwangju Institute of Science and Technology (GIST), 123 Cheomdangwagi-ro, Buk-gu, Gwangju 61005, Korea
| | - Shannon M. Mahurin
- Chemical
Sciences Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States
| | - Sheng Dai
- Department
of Chemistry, University of Tennessee, Buehler Hall, 1420 Circle Dr., Knoxville, Tennessee 37996, United States
- Chemical
Sciences Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States
| | - Jimmy W. Mays
- Department
of Chemistry, University of Tennessee, Buehler Hall, 1420 Circle Dr., Knoxville, Tennessee 37996, United States
- Chemical
Sciences Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States
| | - Nam-Goo Kang
- Department
of Chemistry, University of Tennessee, Buehler Hall, 1420 Circle Dr., Knoxville, Tennessee 37996, United States
| |
Collapse
|
31
|
Zhang J, Ma C, Zhu X, Lu Y, Meng H, Li C, Chen B, Lei Z. Effect of Quaternization on Structure and Adsorptivity of Hyper Cross-Linked Poly(vinyl imidazole) for Thiohenic Sulfurs in Model Oil. Ind Eng Chem Res 2016. [DOI: 10.1021/acs.iecr.6b00961] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Jing Zhang
- State
Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
- College
of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Chunhong Ma
- State
Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
- College
of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Xuexi Zhu
- State
Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
- College
of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Yingzhou Lu
- College
of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Hong Meng
- College
of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Chunxi Li
- State
Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
- College
of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Biaohua Chen
- State
Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
- College
of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Zhigang Lei
- State
Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
- College
of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| |
Collapse
|
32
|
CO2 capture by task specific ionic liquids (TSILs) and polymerized ionic liquids (PILs and AAPILs). J Mol Liq 2016. [DOI: 10.1016/j.molliq.2016.02.046] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
33
|
Hu L, Ni H, Chen X, Wang L, Wei Y, Jiang T, Lü Y, Lu X, Ye P. Hypercrosslinked polymers incorporated with imidazolium salts for enhancing CO2
capture. POLYM ENG SCI 2016. [DOI: 10.1002/pen.24282] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/17/2023]
Affiliation(s)
- Lingling Hu
- Department of Chemistry, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Education Ministry; Zhejiang Sci-Tech University; Hangzhou 310018 China
| | - Huagang Ni
- Department of Chemistry, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Education Ministry; Zhejiang Sci-Tech University; Hangzhou 310018 China
| | - Xiaolong Chen
- Department of Chemistry, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Education Ministry; Zhejiang Sci-Tech University; Hangzhou 310018 China
| | - Lele Wang
- Department of Chemistry, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Education Ministry; Zhejiang Sci-Tech University; Hangzhou 310018 China
| | - Ying Wei
- Department of Chemistry, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Education Ministry; Zhejiang Sci-Tech University; Hangzhou 310018 China
| | - Tengfei Jiang
- Department of Chemistry, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Education Ministry; Zhejiang Sci-Tech University; Hangzhou 310018 China
| | - Yaohong Lü
- Department of Chemistry, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Education Ministry; Zhejiang Sci-Tech University; Hangzhou 310018 China
| | - Xiaolin Lu
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering; Southeast University; Nanjing 210096 China
| | - Peng Ye
- Department of Chemistry, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Education Ministry; Zhejiang Sci-Tech University; Hangzhou 310018 China
| |
Collapse
|
34
|
Dai Z, Noble RD, Gin DL, Zhang X, Deng L. Combination of ionic liquids with membrane technology: A new approach for CO2 separation. J Memb Sci 2016. [DOI: 10.1016/j.memsci.2015.08.060] [Citation(s) in RCA: 278] [Impact Index Per Article: 34.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
35
|
Polybenzimidazole based polymeric ionic liquids possessing partial ionic character: Effects of anion exchange on their gas permeation properties. J Memb Sci 2016. [DOI: 10.1016/j.memsci.2015.09.019] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
36
|
Tomé LC, Marrucho IM. Ionic liquid-based materials: a platform to design engineered CO2 separation membranes. Chem Soc Rev 2016; 45:2785-824. [DOI: 10.1039/c5cs00510h] [Citation(s) in RCA: 285] [Impact Index Per Article: 35.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Abstract
This review provides a judicious assessment of the CO2 separation efficiency of membranes using ionic liquid-based materials and highlights breakthroughs and key challenges in this field.
Collapse
Affiliation(s)
- Liliana C. Tomé
- Instituto de Tecnologia Química e Biológica António Xavier
- Universidade Nova de Lisboa
- 2780-157 Oeiras
- Portugal
| | - Isabel M. Marrucho
- Instituto de Tecnologia Química e Biológica António Xavier
- Universidade Nova de Lisboa
- 2780-157 Oeiras
- Portugal
| |
Collapse
|
37
|
Grygiel K, Lee JS, Sakaushi K, Antonietti M, Yuan J. Thiazolium Poly(ionic liquid)s: Synthesis and Application as Binder for Lithium-Ion Batteries. ACS Macro Lett 2015; 4:1312-1316. [PMID: 35614774 DOI: 10.1021/acsmacrolett.5b00655] [Citation(s) in RCA: 44] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
We report a synthetic route to thiazolium-type poly(ionic liquid)s (PILs), which can be applied as a polymeric binder in lithium-ion batteries. The ionic liquid monomers were first synthesized by quaternization reaction of 4-methyl-5-vinyl thiazole with methyl iodide, followed by anion exchange reactions to replace iodide by fluorinated anions to access a liquid state below 100 °C. Subsequently, these monomers bearing thiazolium cations in their structure underwent radical polymerizations in bulk to produce corresponding polymers. The dependence of solution and thermal properties of such monomeric and polymeric materials on the choice of the counteranion was investigated. Finally, the thiazolium-type PIL bearing a bis(trifluoromethanesulfonyl)imide (TFSI) anion was proven to be a high performance binder for lithium-ion battery electrodes.
Collapse
Affiliation(s)
- Konrad Grygiel
- Department
of Colloid Chemistry, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, OT Golm, D-14476 Potsdam, Germany
| | - Jung-Soo Lee
- Department
of Colloid Chemistry, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, OT Golm, D-14476 Potsdam, Germany
| | - Ken Sakaushi
- Department
of Colloid Chemistry, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, OT Golm, D-14476 Potsdam, Germany
- International
Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science, 1-1 Namiki, Tsukuba, 305-0044 Ibaraki, Japan
| | - Markus Antonietti
- Department
of Colloid Chemistry, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, OT Golm, D-14476 Potsdam, Germany
| | - Jiayin Yuan
- Department
of Colloid Chemistry, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, OT Golm, D-14476 Potsdam, Germany
| |
Collapse
|
38
|
Lu JG, Lu ZY, Chen Y, Wang JT, Gao L, Gao X, Tang YQ, Liu DG. CO2 absorption into aqueous blends of ionic liquid and amine in a membrane contactor. Sep Purif Technol 2015. [DOI: 10.1016/j.seppur.2015.07.010] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
39
|
Zulfiqar S, Sarwar MI, Mecerreyes D. Polymeric ionic liquids for CO2 capture and separation: potential, progress and challenges. Polym Chem 2015. [DOI: 10.1039/c5py00842e] [Citation(s) in RCA: 137] [Impact Index Per Article: 15.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
This review presents the potential of polymeric ionic liquids for CO2 capture whose sorption efficiency surpasses that of molecular ionic liquids.
Collapse
Affiliation(s)
- Sonia Zulfiqar
- Department of Chemistry
- School of Natural Sciences (SNS)
- National University of Sciences and Technology (NUST)
- Islamabad 44000
- Pakistan
| | - Muhammad Ilyas Sarwar
- Department of Chemistry
- School of Natural Sciences (SNS)
- National University of Sciences and Technology (NUST)
- Islamabad 44000
- Pakistan
| | - David Mecerreyes
- POLYMAT
- University of the Basque Country UPV/EHU
- 20018 Donostia-San Sebastián
- Spain
- Ikerbasque
| |
Collapse
|
40
|
Investigation of gas permeation properties of film forming polymeric ionic liquids (PILs) based on polybenzimidazoles. J Memb Sci 2014. [DOI: 10.1016/j.memsci.2014.07.076] [Citation(s) in RCA: 38] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
41
|
|
42
|
Kumbharkar SC, Bhavsar RS, Kharul UK. Film forming polymeric ionic liquids (PILs) based on polybenzimidazoles for CO2separation. RSC Adv 2014. [DOI: 10.1039/c3ra44632h] [Citation(s) in RCA: 39] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
|
43
|
Magalhães TO, Aquino AS, Vecchia FD, Bernard FL, Seferin M, Menezes SC, Ligabue R, Einloft S. Syntheses and characterization of new poly(ionic liquid)s designed for CO2 capture. RSC Adv 2014. [DOI: 10.1039/c4ra00071d] [Citation(s) in RCA: 36] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
|
44
|
Affiliation(s)
- Zhigang Lei
- State Key Laboratory of Chemical
Resource Engineering, Beijing University of Chemical Technology, Box 266, Beijing, 100029, China
| | - Chengna Dai
- State Key Laboratory of Chemical
Resource Engineering, Beijing University of Chemical Technology, Box 266, Beijing, 100029, China
| | - Biaohua Chen
- State Key Laboratory of Chemical
Resource Engineering, Beijing University of Chemical Technology, Box 266, Beijing, 100029, China
| |
Collapse
|
45
|
Privalova EI, Karjalainen E, Nurmi M, Mäki-Arvela P, Eränen K, Tenhu H, Murzin DY, Mikkola JP. Imidazolium-based poly(ionic liquid)s as new alternatives for CO2 capture. CHEMSUSCHEM 2013; 6:1500-1509. [PMID: 23881741 DOI: 10.1002/cssc.201300120] [Citation(s) in RCA: 41] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/05/2013] [Revised: 05/11/2013] [Indexed: 06/02/2023]
Abstract
Solid imidazolium-based poly(ionic liquid)s with variable molecular weights that contain the poly[2-(1-butylimidazolium-3-yl)ethyl methacrylate] (BIEMA) cation and different counter anions were evaluated in terms of CO2 capture and compared with classical ionic liquids with similar counter anions. In addition to poly(ionic liquid)s with often-applied ions such as BF4 (-) , PF6 (-) , NTf2 (-) , trifluoromethanesulfonate (OTf(-) ) and Br(-) , for the first time [BIEMA][acetate] was synthesised, which revealed a remarkably high CO2 sorption performance that exceeded the poly(ionic liquid)s studied previously on average by a factor of four (12.46 mg gPIL (-1) ). This study provides an understanding of the factors that affect CO2 sorption and a comparison of the CO2 capture efficiency with the frequently used sorbents. Moreover, all the studied sorbents were reusable if regenerated under carefully selected conditions and can be considered as suitable candidates for CO2 sorption.
Collapse
Affiliation(s)
- Elena I Privalova
- Process Chemistry Centre, Laboratory of Industrial Chemistry and Reaction Engineering, Åbo Akademi University, 20500 Turku/Åbo, Finland
| | | | | | | | | | | | | | | |
Collapse
|
46
|
|
47
|
|
48
|
Yu G, Li Q, Li N, Man Z, Pu C, Asumana C, Chen X. Synthesis of new crosslinked porous ammonium-based poly(ionic liquid) and application in CO2
adsorption. POLYM ENG SCI 2013. [DOI: 10.1002/pen.23541] [Citation(s) in RCA: 32] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Guangren Yu
- Beijing Key Laboratory of Membrane Science and Technology and College of Chemical Engineering; Beijing University of Chemical Technology; Beijing 100029 People's Republic of China
| | - Qingzeng Li
- Beijing Key Laboratory of Membrane Science and Technology and College of Chemical Engineering; Beijing University of Chemical Technology; Beijing 100029 People's Republic of China
| | - Na Li
- Beijing Key Laboratory of Membrane Science and Technology and College of Chemical Engineering; Beijing University of Chemical Technology; Beijing 100029 People's Republic of China
| | - Ziwei Man
- Beijing Key Laboratory of Membrane Science and Technology and College of Chemical Engineering; Beijing University of Chemical Technology; Beijing 100029 People's Republic of China
| | - Chenghao Pu
- Beijing Key Laboratory of Membrane Science and Technology and College of Chemical Engineering; Beijing University of Chemical Technology; Beijing 100029 People's Republic of China
| | - Charles Asumana
- Beijing Key Laboratory of Membrane Science and Technology and College of Chemical Engineering; Beijing University of Chemical Technology; Beijing 100029 People's Republic of China
| | - Xiaochun Chen
- Beijing Key Laboratory of Membrane Science and Technology and College of Chemical Engineering; Beijing University of Chemical Technology; Beijing 100029 People's Republic of China
| |
Collapse
|
49
|
Tomé LC, Mecerreyes D, Freire CS, Rebelo LPN, Marrucho IM. Pyrrolidinium-based polymeric ionic liquid materials: New perspectives for CO2 separation membranes. J Memb Sci 2013. [DOI: 10.1016/j.memsci.2012.10.044] [Citation(s) in RCA: 118] [Impact Index Per Article: 10.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
50
|
Wilke A, Yuan J, Antonietti M, Weber J. Enhanced Carbon Dioxide Adsorption by a Mesoporous Poly(ionic liquid). ACS Macro Lett 2012; 1:1028-1031. [PMID: 35607031 DOI: 10.1021/mz3003352] [Citation(s) in RCA: 142] [Impact Index Per Article: 11.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
Abstract
The synthesis of a mesoporous poly(ionic liquid) network via a hard-templating pathway is presented. Structure analysis was carried out using gas adsorption, small-angle X-ray scattering, and electron microscopy. The mesoporous poly(ionic liquid) showed a significantly faster CO2 adsorption than its nonporous counterpart. We found the adsorption is accompanied by strong interactions, which are also reflected in a high CO2 over N2 selectivity.
Collapse
Affiliation(s)
- Antje Wilke
- Max Planck Institute of Colloids and Interfaces, Colloid Chemistry, Science
Park Golm, 14424 Potsdam, Germany
| | - Jiayin Yuan
- Max Planck Institute of Colloids and Interfaces, Colloid Chemistry, Science
Park Golm, 14424 Potsdam, Germany
| | - Markus Antonietti
- Max Planck Institute of Colloids and Interfaces, Colloid Chemistry, Science
Park Golm, 14424 Potsdam, Germany
| | - Jens Weber
- Max Planck Institute of Colloids and Interfaces, Colloid Chemistry, Science
Park Golm, 14424 Potsdam, Germany
| |
Collapse
|