pH-Dependent force spectroscopy of tri(ethylene glycol)- and methyl-terminated self-assembled monolayers adsorbed on gold

Physicochemical surface properties of Chlorella vulgaris: a multiscale assessment, from electrokinetic and proton uptake descriptors to intermolecular adhesion forces

Given the growing scientific and industrial interests in green microalgae, a comprehensive understanding of the forces controlling the colloidal stability of these bioparticles and their interactions with surrounding aqueous microenvironment is required. Accordingly, we addressed here the electrostatic and hydrophobic surface properties of Chlorella vulgaris from the population down to the individual cell levels. We first investigated the organisation of the electrical double layer at microalgae surfaces on the basis of electrophoresis measurements. Interpretation of the results beyond zeta-potential framework underlined the need to account for both the hydrodynamic softness of the algae cells and the heterogeneity of their interface formed with the outer electrolyte solution. We further explored the nature of the structural charge carriers at microalgae interfaces through potentiometric proton titrations. Extraction of the electrostatic descriptors of interest from such data was obscured by cell physiology processes and dependence thereof on prevailing measurement conditions, which includes light, temperature and medium salinity. As an alternative, cell electrostatics was successfully evaluated at the cellular level upon mapping the molecular interactions at stake between (positively and negatively) charged atomic force microscopy tips and algal surface via chemical force microscopy. A thorough comparison between charge-dependent tip-to-algae surface adhesion and hydrophobicity level of microalgae surface evidenced that the contribution of electrostatics to the overall interaction pattern is largest, and that the electrostatic/hydrophobic balance can be largely modulated by pH. Overall, the combination of multiscale physicochemical approaches allowed a drawing of some of the key biosurface properties that govern microalgae cell-cell and cell-surface interactions.

Fluoropolymer-MOF Hybrids with Switchable Hydrophilicity for 19F MRI-Monitored Cancer Therapy

Cancer theranostics that combines cancer diagnosis and therapy is a promising approach for personalized cancer treatment. However, current theranostic strategies suffer from low imaging sensitivity for visualization and an inability to target the diseased tissue site with high specificity, thus hindering their translation to the clinic. In this study, we have developed a tumor microenvironment-responsive hybrid theranostic agent by grafting water-soluble, low-fouling fluoropolymers to pH-responsive zeolitic imidazolate framework-8 (ZIF-8) nanoparticles by surface-initiated RAFT polymerization. The conjugation of the fluoropolymers to ZIF-8 nanoparticles not only allows sensitive in vivo visualization of the nanoparticles by ¹⁹F MRI but also significantly prolongs their circulation time in the bloodstream, resulting in improved delivery efficiency to tumor tissue. The ZIF-8-fluoropolymer nanoparticles can respond to the acidic tumor microenvironment, leading to progressive degradation of the nanoparticles and release of zinc ions as well as encapsulated anticancer drugs. The zinc ions released from the ZIF-8 can further coordinate to the fluoropolymers to switch the hydrophilicity and reverse the surface charge of the nanoparticles. This transition in hydrophilicity and surface charge of the polymeric coating can reduce the "stealth-like" nature of the agent and enhance specific uptake by cancer cells. Hence, these hybrid nanoparticles represent intelligent theranostics with highly sensitive imaging capability, significantly prolonged blood circulation time, greatly improved accumulation within the tumor tissue, and enhanced anticancer therapeutic efficiency.

Switchable β-lactoglobulin (BLG) adsorption on protein resistant oligo (ethylene glycol) (OEG) self-assembled monolayers (SAMs)

HYPOTHESIS

Although protein adsorption at an interface is very common and important in biology and biotechnology, it is still not fully understood - mainly due to the intricate balance of forces that ultimately control it. In food processing (and medicine), controlling and manipulating protein adsorption, as well as avoiding protein adsorption (biofilm formation or membrane fouling) by the production of protein-resistant surfaces is of substantial interest. A major factor conferring resistance towards protein adsorption to a surface is the presence of tightly bound water molecules, as is the case in oligo ethylene glycol (OEG)-terminated self-assembled monolayers (SAMs). Due to strong attractive protein-protein and protein-surface interactions observed in systems containing trivalent salt ions, we hypothesize that these conditions may lead to a breakdown of protein resistance in OEG SAMs.

EXPERIMENTS

We studied the adsorption behavior of BLG in the presence of a lanthanum(III) chloride (LaCl₃) at concentrations of 0, 0.1, 0.8 and 5.0 mM on normally protein resistant triethylene glycol-termianted (EG3) SAMs on a gold surface. We used quartz-crystal microbalance with dissipation (QCM-D) and neutron reflectivity (NR) to characterize the morphology of the interfacial region of the SAM.

FINDINGS

We demonstrate that the protein resistance of the EG3 SAM breaks down beyond a threshold salt concentration c^∗ and mirrors the bulk behaviour of this system, showing reduced adsorption beyond a second critical salt concentration c^∗∗. These results demonstrate for the first time the controlled switching of the protein-resistant properties of this type of SAM by the addition of trivalent salt.

Electrochemistry Study of Permselectivity and Interfacial Electron Transfers of a Branch-Tailed Fluorosurfactant Self-Assembled Monolayer on Gold

We investigated the permselectivity and interfacial electron transfers of an amphiphilic branch-tailed fluorosurfactant self-assembled monolayer (FS-SAM) on a gold electrode by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The FS-SAM was prepared by a self-assembly technique and a "click" reaction. The barrier property and interfacial electron transfers of the FS-SAM were also evaluated using various probes with different features. The FS-SAM allowed a higher degree of permeation by small hydrophilic (Cl^- and F^-) electrolyte ions than large hydrophobic (ClO₄^- and PF₆^-) ones. Meanwhile, the redox reaction of the Fe(CN)₆^3- couple was nearly completely blocked by the FS-SAM, whereas the electron transfer of Ru(NH₃)₆³⁺ was easier than that of Fe(CN)₆^3-, which may be due to the underlying tunneling mechanism. For hydrophobic dopamine, the hydrophobic bonding between the FS-SAM exterior fluoroalkyl moieties and the hydrophobic probes, as well as the hydration resistance from the interior hydration shell around the oligo (ethylene glycol) moieties, hindered the transport of hydrophobic probes into the FS-SAM. These results may have profound implications for understanding the permselectivity and electron transfers of amphiphilic surfaces consisting of molecules containing aromatic groups and branch-tailed fluorosurfactants in their structures.

Gold nanoparticles decorated with oligo(ethylene glycol) thiols: surface charges and interactions with proteins in solution

We have studied oligo(ethylene glycol) (OEG) thiol self-assembled monolayer (SAM) coated gold nanoparticles (AuOEG) and their interactions with proteins in solutions using electrophoretic and dynamic light scattering (ELS and DLS). The results are compared with poly(ethylene glycol) (PEG) thiol coated AuNPs (AuPEG). We show that both AuOEG and AuPEG particles carry a low net negative charge and are very stable (remaining so for more than one year), but long-term aging or dialysis can reduce the stability. If the decorated AuNPs are mixed with bovine serum albumin (BSA), both effective size and zeta-potential of the AuNPs remain unchanged, indicating no adsorption of BSA to the colloid surface. However, when mixed with lysozyme, zeta-potential values increase with protein concentrations and lead to a charge inversion, indicating adsorption of lysozyme to the colloid surface. The colloidal solutions of AuOEG become unstable near zero charge, indicated by a cluster peak in the DLS measurements. The AuPEG solutions show similar charge inversion upon addition of lysozyme, but the solutions are stable under all experimental conditions, presumably because of the strong steric effect of PEG. Washing the protein bound colloids by centrifugation can remove only part of the adsorbed lysozyme molecules indicating that a few proteins adsorb strongly to the colloids. The effective charge inversion and rather strongly bound lysozyme on the colloid surface may suggest that in addition to the charges formed at the SAM-water interface, there are defects on the surface of the colloid, which are accessible to the proteins. The results of this study of surface charge, and stability shed light on the interaction with proteins of SAM coated AuNPs and their applications.

Effects of surface charge and Gibbs surface energy on the settlement behaviour of barnacle cyprids (Balanus amphitrite)

Gibbs surface energy has long been considered to be an important parameter in the design of fouling-resistant surfaces for marine applications. Rigorous testing of the hypothesis that settlement is related to Gibbs surface energy however has never been accomplished, due mainly to practical limitations imposed by the necessary combination of surface engineering and biological evaluation methods. In this article, the effects of surface charge and Gibbs surface energy on the settlement of cyprids of an important fouling barnacle, Balanus amphitrite, were evaluated. Settlement assays were conducted on a range of self-assembled monolayers (SAMs) (CH(3)-, OH-, COOH-, N(CH(3))(3) (+)-, NH(2)-terminated), presented in gold-coated polystyrene well plates, varying in terms of their surface charge and Gibbs surface energy. Contrary to contemporary theory, settlement was not increased by high-energy surfaces, rather the opposite was found to be the case with cyprids settling in greater numbers on a low-energy CH(3)- SAM compared to a high-energy OH- SAM. Settlement was also greater on negatively-charged SAMs, compared to neutral and positively-charged SAMs. These findings are discussed in the context of data drawn from surfaces that varied in multiple characteristics simultaneously, as have been used previously for such experiments. The finding that surface charge, rather than total surface energy, may be responsible for surface selection by cyprids, will have significant implications for the design of future fouling-resistant materials.

Combined microslit electrokinetic measurements and reflectometric interference spectroscopy to study protein adsorption processes

Streaming potential/current measurements for the characterization of charge formation processes at solid/liquid interfaces were combined with reflectometric interference spectroscopy. The simultaneous determination of electrosurface characteristics and the optical thickness of interfacial layers provides information on structural variations of adsorbed or covalently bound polymers and on charge dependent adsorption and desorption phenomena at solid/liquid interfaces. To demonstrate the potentialities of this extended approach for biointerfacial studies the authors report a series of experiments on the adsorption of the plasma protein fibrinogen at poly(octadecene-alt-maleic acid) thin films.

Simulations of water at the interface with hydrophilic self-assembled monolayers

Simulations of water at hydrophilic self-assembled monolayer (SAM) surfaces are especially relevant for biological interfaces. Well-defined, atomically smooth surfaces that can be continuously varied are possible with SAMs. These characteristics enable more accurate measurements than many other surfaces with the added advantage of tailoring the surface to treat specific chemical groups. A fundamental question is how solid surfaces affect the structure and dynamics of water. Measurements of the structure and dynamics of water at solid surfaces have improved significantly, but there remain differences among the experiments. In this article, the authors review simulations of water at the interface with hydrophilic SAMs. These simulations find that while the interfacial water molecules are slower than the bulk water molecules, the interfacial dynamics remains that of a liquid. A major biological application of SAMs is for making coatings resistant to protein adsorption. SAMs terminated with ethylene glycol monomers have proven to be excellent at resisting protein adsorption. Understanding the mechanisms behind this resistance remains an unresolved issue. Recent simulations suggest a new perspective of the role of interfacial water and the inseparable interplay between the SAM and the water.

The role of "inert" surface chemistry in marine biofouling prevention

The settlement and colonization of marine organisms on submerged man-made surfaces is a major economic problem for many marine industries. The most apparent detrimental effects of biofouling are increased fuel consumption of ships, clogging of membranes and heat exchangers, disabled underwater sensors, and growth of biofoulers in aquaculture systems. The presently common-but environmentally very problematic-way to deal with marine biofouling is to incorporate biocides, which use biocidal products in the surface coatings to kill the colonizing organisms, into the surface coatings. Since the implementation of the International Maritime Organization Treaty on biocides in 2008, the use of tributyltin (TBT) is restricted and thus environmentally benign but effective surface coatings are required. In this short review, we summarize the different strategies which are pursued in academia and industry to better understand the mechanisms of biofouling and to develop strategies which can be used for industrial products. Our focus will be on chemically "inert" model surface coatings, in particular oligo- and poly(ethylene glycol) (OEG and PEG) functionalized surface films. The reasons for choosing this class of chemistry as an example are three-fold: Firstly, experiments on spore settlement on OEG and PEG coatings help to understand the mechanism of non-fouling of highly hydrated interfaces; secondly, these studies defy the common assumption that surface hydrophilicity-as measured by water contact angles-is an unambiguous and predictive tool to determine the fouling behavior on the surface; and thirdly, choosing this system is a good example for "interfacial systems chemistry": it connects the behavior of unicellular marine organisms with the antifouling properties of a hydrated surface coating with structural and electronic properties as derived from ab initio quantum mechanical calculations using the electronic wave functions of oxygen, hydrogen, and carbon. This short review is written to outline for non-experts the hierarchical structure in length- and timescale of marine biofouling and the role of surface chemistry in fouling prevention. Experts in the field are referred to more specialized recent reviews.

Characterization of low-fouling ethylene glycol containing plasma polymer films

Low-protein-fouling poly(ethylene glycol) (PEG-like) plasma polymer films were prepared using radio frequency glow discharge polymerization of diethylene glycol dimethyl ether (DGpp) on top of a heptylamine plasma polymer primer layer. By varying the plasma deposition conditions, the chemistry of the DGpp film was influenced, especially in regard to the level of ether content, which in turn influenced the relative levels of bovine serum albumin and lysozyme protein fouling. Surface potential measurements indicated that these surfaces carried a net negative charge. While protein fouling remained low ( approximately 10 ng/cm2), there was a slightly higher level of the positively charged protein adsorbed on these films than the negative protein. The interaction forces measured between a silica spherical surface on both "high"- and "low"-protein-fouling DGpp films were all repulsive and short ranged (2-3 nm). There was no correlation between the surface forces measured for high- and low-protein-fouling DGpp films. Thus, it appears that enthalpic effects are very important in reducing protein adsorption. We therefore conclude that it is the concentration of residual, ethylene glycol containing species that are the crucial parameter determining protein resistance due to a combination of both entropic and enthalpic effects.

Directed formation of micro- and nanoscale patterns of functional light-harvesting LH2 complexes

The precision placement of the desired protein components on a suitable substrate is an essential prelude to any hybrid "biochip" device, but a second and equally important condition must also be met: the retention of full biological activity. Here we demonstrate the selective binding of an optically active membrane protein, the light-harvesting LH2 complex from Rhodobacter sphaeroides, to patterned self-assembled monolayers at the micron scale and the fabrication of nanometer-scale patterns of these molecules using near-field photolithographic methods. In contrast to plasma proteins, which are reversibly adsorbed on many surfaces, the LH2 complex is readily patterned simply by spatial control of surface polarity. Near-field photolithography has yielded rows of light-harvesting complexes only 98 nm wide. Retention of the native optical properties of patterned LH2 molecules was demonstrated using in situ fluorescence emission spectroscopy.

Gold nanoparticles decorated with oligo(ethylene glycol) thiols: protein resistance and colloidal stability

The interactions between proteins and gold colloids functionalized with protein-resistant oligo(ethylene glycol) (OEG) thiol, HS(CH2)11(OCH2CH2)6OMe (EG6OMe), in aqueous solution have been studied by small-angle X-ray scattering (SAXS) and UV-vis spectroscopy. The mean size, 2R, and the size distribution of the decorated gold colloids have been characterized by SAXS. The monolayer-protected gold colloids have no correlations due to the low volume fraction in solution and are stable in a wide range of temperatures (5-70 degrees C), pH (1.3-12.4), and ionic strength (0-1.0 M). In contrast, protein (bovine serum albumin) solutions with concentrations in the range of 60-200 mg/mL (4.6-14.5 vol %) show a pronounced correlation peak in SAXS, which results from the repulsive electrostatic interaction between charged proteins. These protein interactions show significant dependence on ionic strength, as would be expected for an electrostatic interaction (Zhang et al. J. Phys. Chem. B 2007, 111, 251). For a mixture of proteins and gold colloids, the protein-protein interaction changes little upon mixing with OEG-decorated gold colloids. In contrast, the colloid-colloid interaction is found to be strongly dependent on the protein concentration and the size of the colloid itself. Adding protein to a colloidal solution results in an attractive depletion interaction between functionalized gold colloids, and above a critical protein concentration, c*, the colloids form aggregates and flocculate. Adding salt to such mixtures enhances the depletion effect and decreases the critical protein concentration. The aggregation is a reversible process (i.e., diluting the solution leads to dissolution of aggregates). The results also indicate that the charge of the OEG self-assembled monolayer at a curved interface has a rather limited effect on the colloidal stabilization and the repulsive interaction with proteins.

The Ion Sensitivity of Surface Conductive Single Crystalline Diamond

Charge build-up at the solid/aqueous interface is a ubiquitous phenomenon that determines the properties of interfacial electrical double layers. Due to its unique properties, the surface of diamond offers an attractive platform to investigate charging mechanisms in aqueous solutions. We investigate the surface charge by studying the ion sensitivity of H-terminated single crystalline diamond surface conductive layers. The effect of monovalent and divalent salts has been probed at different pH values. For a pH above 3.5, increasing the ionic strength results in a decrease of the surface conductivity, in contrast to the results obtained for pH below 3.5. Electrokinetic experiments are in good agreement with the surface conductivity measurements, showing an isoelectric point at pH 3.5 for the H-terminated diamond surface. We discuss the results in terms of the Coulombic screening by electrolyte ions of the surface potential, which is induced by a pH-dependent surface charge. The origin of this surface charge is discussed in terms of charge regulation by amphoteric hydroxyl surface groups and unsymmetrical adsorption of hydroxide and hydronium ions induced by the hydrophobic nature of the H-terminated diamond surface. This surface charge can have important consequences for processes governed by the diamond/aqueous interface, such as electron transfer to charged redox molecules, adsorption of charged molecules and proteins, and ion sensitivity.

Relationship between blood compatibility and water structure—Comparative study between 2-methoxyethylacrylate- and 2-methoxyethylmethacrylate-based random copolymers

We have proposed that the excellent blood compatibility of poly(2-methoxyethylacrylate (MEA)) is caused by freezing bound water contained in it on the basis of results on platelet activation (Tanaka and Mochizuki, J Biomed Mater Res A 2004; 68:684-695). To clarify the applicability of this mechanism to other indexes for blood compatibility, the relationship between complement activation and water structure was investigated by using two copolymers, poly(MEA-2-hydroxyethylmethacrylate (HEMA)) and poly(2-methoxyethylmethacrylate (MEMA)-HEMA), where HEMA content was varied from 25 to 90 mol %. ESCA analysis revealed that the surface compositions of these copolymers (dry state) agreed with the compositions determined by (1)H NMR. However, analysis by water contact angle (wet state) showed that their surfaces were quite different. The contact angle of poly(MEMA-HEMA) depended on the monomer composition, whereas the angle of poly(MEA-HEMA) was close to that of polyHEMA regardless of the monomer composition. The effect of HEMA content in the copolymers on complement activation (production of C3a) was investigated in an in vitro test. The activation by poly(MEMA-HEMA) was enhanced according to the HEMA content, while the activation by poly(MEA-HEMA) with 0-40 mol % of HEMA was weak and did not depend on the HEMA content. These properties are discussed from the viewpoints of the water structure observed by DSC and the surface structure.

Adsorption-induced conformational changes of proteins onto ceramic particles: Differential scanning calorimetry and FTIR analysis

Three model proteins, bovine serum albumin, hen's egg lysozyme and bovine serum fibrinogen, were adsorbed from aqueous solution onto finely dispersed ceramic particles, namely different kinds of alumina and hydroxyapatite particles. The influence of adsorption on protein secondary structure was investigated. The FTIR spectroscopic findings were compared with the results of DSC measurements. In almost all cases it was found that adsorption results in destabilisation and structural loss of the bound protein. A decrease in transition enthalpy is correlated with a loss in alpha-helical structure, which seems to be the most sensitive structure on adsorption-induced rearrangements. A total collapse of structure in the adsorbed proteins was not determined on any ceramic surface. Some residual structure is always retained. Structural changes in the D- or E-domains of fibrinogen could be independently observed by two different calorimetric signals. The two techniques applied in the present study -- micro-DSC and FTIR spectroscopy -- can be concluded to provide complementary information on adsorption-induced structural changes on both the molecular (thermal stability, overall structure) and the sub-molecular level (secondary structure).

Dendritic structures of poly(ethylene glycol) on silicon nitride and gold surfaces

A hydrophilic silicon nitride surface was grafted with poly(ethylene glycol) monomethyl ether (average formula weight of 5000 Da) in a one-step protocol. The domains of stable dendritic structures of self-assembled monolayer islands on a silicon nitride surface were observed with atomic force microscopy. The moduli of elasticity of these dendritic structures in air and in KCl aqueous solution were compared. The value of the Young's modulus of these structures is reduced by more than 3 orders of magnitude, from approximately 12 GPa measured in air to approximately 5 MPa in KCl solution. This dramatic reduction in elasticity was attributed to the swelling of the dendritic structures in aqueous solution, which was verified by the increased film thickness. These dendritic structures were not stable in the aqueous environment and could be removed by soaking in water for 22 h because of the hydrolysis of the silicate bonds. This fact was confirmed by the reduction of the C1s signal in the X-ray photoelectron spectroscopy experiments. These morphologies are not unique to silicon nitride substrate; similar features were also observed for thiolated poly(ethylene glycol) monomethyl ether molecules absorbed on a gold surface.

Positive microcontact printing with mercaptoalkyloligo(ethylene glycol)s

The soft lithographic replication of patterns with a low filling ratio by microcontact printing (microCP) is problematic due to the poor mechanical stability of common elastomeric stamps. A recently described strategy to avoid this problem employs a modified patterning method, positive microcontact printing ((+)microCP), in which a stamp with a mechanically more stable inverted relief pattern is used. In contrast to conventional negative microCP ((-)microCP), in the contact areas a self-assembled monolayer (SAM) is printed of a "positive ink", which provides only minor etch protection, whereas the noncontacted areas are subsequently covered with a different, etch-resistant SAM, prior to development by chemical etching. With the aim to identify novel, highly versatile positive inks, the patterning of gold by (+)microCP with mercaptoalkyloligo(ethylene glycol)s (MAOEGs), the subsequent adsorption of octadecanethiol (ODT), and the final development by wet chemical etching have now been studied. A polydisperse mixture of mercaptoundecylocta(ethylene glycol) derivatives was found to provide the best patterning results. The surface spreading of the positive ink during stamping, the exchange of printed MAOEGs with ODT, and the choice of the right etching bath were identified as key parameters that influence the achievable pattern resolution and contrast. Due to the modular composition of functionalized alkyloligo(ethylene glycol) derivatives, (+)microCP with these positive inks has the potential for easy adaptation to a variety of materials and development conditions.

Direct measurement of the binding force between microfabricated particles and a planar surface in aqueous solution by force-sensing piezoresistive cantilevers

We propose a force measurement method for evaluating the binding force between microscale flat surfaces in an aqueous solution. Using force-sensing piezoresistive cantilevers with sub-nanonewton force resolution, we have directly measured binding forces between SiO2-SiO2 microcontacts, which were created by gravity-driven random collision between microfabricated SiO2 cylindrical particles and a planar SiO2 substrate in a HCl solution. First, to examine our method we measured the pH dependence of the binding force. The binding forces were 12 and 5.8 nN at pH 1.0 and 2.0, respectively. As the pH increased, the binding force decreased and became zero at pH greater than 3.0. We confirmed that the bindings were based on the van der Waals' (VDW) force at pH 2.0 or less whereas a repulsive double-layer force acted between the surfaces at pH 3.0 or more. Second, the binding forces were categorized into a friction force or an adhesion force between the particles and the substrate. In the measurement, the friction force between the particle and the substrate was measured in the case when the particle slid on the substrate. On the contrary, the adhesion force was measured when the particle came off the substrate. Whether the particle slid or came off depended on the aspect ratio of the particle. We fabricated cylindrical particles with an aspect ratio of 0.03-2.0 and distinguished the friction force from the adhesion force by changing the aspect ratio of the particles. As a result, the friction force per unit contact area between SiO2-SiO2 flat surfaces was found to be 330 pN/microm2 +/- 20% when we used particles with a low aspect ratio (<0.1), and the adhesion force per unit contact area was 90 pN/microm2 +/- 20% for particles with a high aspect ratio (>0.4). For fluidic self-assembly that utilizes microscale surface contact in a liquid, our measurement method is an effective tool for studying and developing systems.

Mixed self-assembled monolayers (SAMs) consisting of methoxy-tri(ethylene glycol)-terminated and alkyl-terminated dimethylchlorosilanes control the non-specific adsorption of proteins at oxidic surfaces

Monolayers from the newly synthesized compound methoxy-tri(ethylene glycol)-undecenyldimethylchlorosilane (CH3O(CH2CH2O)3(CH2)11Si(CH3)2Cl, MeO(EG)3C11DMS) and dodecyldimethylchlorosilane (DDMS), both pure and mixed, were prepared by self-assembly from organic solution in the presence of an organic base. The films obtained were characterized by advancing and receding contact angle measurements and ellipsometry to confirm the formation of self-assembled monolayers (SAMs). The resulting data on the covalently attached dimethylsilanes were compared to known oligo(ethylene glycol) (OEG)-terminated SAM systems based on terminal alkenes, thiolates or trihydrolyzable silanes. The composition of the mixed SAMs was found to depend directly and linearly on the composition of the silanization solution. Enhanced protein repellent properties were found for the SAMs using a variety of proteins, including the Ras Binding Domain (RBD), a protein with high relevance for cancer diagnostics. Roughly a RBD protein monolayer amount was adsorbed to silicon oxide surfaces silanized with DDMS or non-silanized silicon wafers, and in contrast, no RBD was adsorbed to surfaces silanized with MeO(EG)3C11DMS or to mixed monolayers consisting of DDMS and MeO(EG)3C11DMS if the content of OEG-silane overcame a critical content of X(EG) approximately 0.9.

Molecular gradients: an efficient approach for optimizing the surface properties of biomaterials and biochips

A variety of molecular gradients of alkanethiols with the structure HS-(CH(2))(m)-X (m = 15; X = COOH, CH(2)NH(2), or CH(3)) and oligo(ethylene glycol)-terminated alkanethiols with the structures HS-(CH(2))(15)-CO-NH-Eg(n) (n = 2, 4, or 6), HS-(CH(2))(15)-CO-NH-Eg(2)-(CH(2))(2)-NH-CO-(CH(2))(4)-biotin, and HS-(CH(2))(15)-CO-NH-Eg(6)-CH(2)-COOH were prepared on polycrystalline gold films. These gradients were designed to serve as model surfaces for fundamental studies of protein adsorption and immobilization phenomena. Ellipsometry, infrared spectroscopy, and X-ray photoelectron spectroscopy, operating in scanning mode, were used to monitor the layer composition, gradient profiles, tail group conformation, and overall structural quality of the gradient assemblies. The gradient profiles were found to be 4-10 mm wide, and they increased in width with increasing difference in molecular complexity between the thiols used to form the gradient. The oligo(ethylene glycol) thiols are particularly interesting because they can be used to prepare so-called conformational gradients, that is, gradients that display a variation in oligo(ethylene glycol) chain conformation from all trans on the extreme Eg(2,4) sides, via an amorphous-like phase in the mixing regimes, to helical at the extreme Eg(6) sides. We demonstrate herein a series of experiments where the above gradients are used to evaluate nonspecific binding of the plasma protein fibrinogen, and in agreement with previous studies, the highest amounts of nonspecifically bound fibrinogen were observed on all-trans monolayers, that is, on the extreme Eg(2,4) sides. Moreover, gradients between Eg(2) and a biotinylated analogue have been prepared to optimize the conditions for the immobilization of streptavidin. Ellipsometry and infrared spectroscopy reveal high levels of immobilization over a fairly broad range of compositions in the gradient regime, with a maximum between 50 and 60% of the biotinylated analogue in the monolayer. A pI gradient composed of (NH(3)(+)/COO(-))-terminated thiols was also prepared and evaluated with respect to its ability to separate differently charged proteins, pepsin, and lysozyme, on a solid surface.

Physisorption of Hydroxide Ions from Aqueous Solution to a Hydrophobic Surface

We present results from detailed molecular dynamics simulations revealing a counterintuitive spontaneous physical adsorption of hydroxide ions at a water/hydrophobic interface. The driving force for the migration of the hydroxide ions from the aqueous phase is the preferential orientation of the water molecules in the first two water layers away from the hydrophobic surface. This ordering of the water molecules generates an electrical potential gradient that strongly and favorably interacts with the dipole moment of the hydroxide ion. These findings offer a physical mechanism that explains intriguing experimental reports indicating that the interface between water and a nonionic surface is negatively charged.

A Glucose Biosensor Based on Surface-Enhanced Raman Scattering: Improved Partition Layer, Temporal Stability, Reversibility, and Resistance to Serum Protein Interference

This work updates the recent progress made toward fabricating a real-time, quantitative, and biocompatible glucose sensor based on surface-enhanced Raman scattering (SERS). The sensor design relies on an alkanethiolate tri(ethylene glycol) monolayer that acts as a partition layer, preconcentrating glucose near a SERS-active surface. Chemometric analysis of the captured SERS spectra demonstrates that glucose is quantitatively detected in the physiological concentration range (0-450 mg/dL, 0-25 mM). In fact, 94% of the predicted glucose concentrations fall within regions A and B of the Clarke error grid, making acceptable predictions in a clinically relevant range. The data presented herein also demonstrate that the glucose sensor provides stable SERS spectra for at least 3 days, making the SERS substrate a candidate for implantable sensing. Glucose sensor reversibility and reusability is evaluated as the sensor is alternately exposed to glucose and saline solutions; after each cycle, difference spectra reveal that the partitioning process is largely reversible. Finally, the SERS glucose sensor successfully partitions glucose even when challenged with bovine serum albumin, a serum protein mimic.

Factors that determine the protein resistance of oligoether self-assembled monolayers --internal hydrophilicity, terminal hydrophilicity, and lateral packing density

Protein resistance of oligoether self-assembled monolayers (SAMs) on gold and silver surfaces has been investigated systematically to elucidate structural factors that determine whether a SAM will be able to resist protein adsorption. Oligo(ethylene glycol) (OEG)-, oligo(propylene glycol)-, and oligo(trimethylene glycol)-terminated alkanethiols with different chain lengths and alkyl termination were synthesized as monolayer constituents. The packing density and chemical composition of the SAMs were examined by XPS spectroscopy; the terminal hydrophilicity was characterized by contact angle measurements. IRRAS spectroscopy gave information about the chain conformation of specific monolayers; the amount of adsorbed protein as compared to alkanethiol monolayers was determined by ellipsometry. We found several factors that in combination or by themselves suppress the protein resistance of oligoether monolayers. Monolayers with a hydrophobic interior, such as those containing oligo(propylene glycol), show no protein resistance. The lateral compression of oligo(ethylene glycol) monolayers on silver generates more highly ordered monolayers and may cause decreased protein resistance, but does not necessarily lead to an all-trans chain conformation of the OEG moieties. Water contact angles higher than 70 degrees on gold or 65 degrees on silver reduce full protein resistance. We conclude that both internal and terminal hydrophilicity favor the protein resistance of an oligoether monolayer. It is suggested that the penetration of water molecules in the interior of the SAM is a necessary prerequisite for protein resistance. We discuss and summarize the various factors which are critical for the functionality of "inert" organic films.

Hydroxide ion adsorption on self-assembled monolayers

It is argued, on the basis of density functional calculations, that a self-assembled monolayer of oligo(ethylene glycol) or n-alkanes in contact with water will preferentially adsorb hydroxyl ions (either from autoionization of water or added to the solution) on both methoxy- and hydroxide-terminated endgroups, thus charging the surface region of the SAM negatively with an estimated charge density of about 1 microC/cm(2) in agreement with recent experiments. The negative charging can explain long-ranged forces between opposing SAM surfaces. On dense SAMs, hydroxyl ions are highly mobile. Hydronium ions can absorb by penetration into the SAM provided there is enough lateral space for their encapsulation. The important role of hydration is demonstrated by calculating the excess binding energy of adsorption using a Born-Haber cycle.