Spotlighting of cocaine by an autonomous aptamer-based machine

Deep learning-assisted mass spectrometry imaging for preliminary screening and pre-classification of psychoactive substances

Currently, it is of great urgency to develop a rapid pre-classification and screening method for suspected drugs as the constantly springing up of new psychoactive substances. In most researches, psychoactive substances classification approaches depended on the similar chemical structures and pharmacological action with known drugs. Such approaches could not face the complicated circumstance of emerging new psychoactive substances. Herein, mass spectrometry imaging and convolutional neural networks (CNN) were used for preliminary screening and pre-classification of suspected psychoactive substances. Mass spectrometry imaging was performed simultaneously on two brain slices as one was from blank group and another one was from psychoactive substance-induced group. Then, fused neurotransmitter variation mass spectrometry images (Nv-MSIs) reflecting the difference of neurotransmitters between two slices were achieved through two homemade programs. A CNN model was developed to classify the Nv-MSIs. Compared with traditional classification methods, CNN achieved better estimation accuracy and required minimal data preprocessing. Also, the specific region on Nv-MSIs and weight of each neurotransmitter that affected the classification most could be unraveled by CNN. Finally, the method was successfully applied to assist the identification of a new psychoactive substance seized recently. This sample was identified as cannabinoids, which greatly promoted the screening process.

Predicting DNA toehold-mediated strand displacement rate constants using a DNA-BERT transformer deep learning model

Dynamic DNA nanotechnology is driving exciting developments in molecular computing, cargo delivery, sensing and detection. Combining this innovative area of research with the progress made in machine learning will aid in the design of sophisticated DNA machinery. Herein, we present a novel framework based on a transformer architecture and a deep learning model which can predict the rate constant of toehold-mediated strand displacement, the underlying process in dynamic DNA nanotechnology. Initially, a dataset of 4450 DNA sequences and corresponding rate constants were generated in-silico using KinDA. Subsequently, a 1D convolution neural network was trained using specific local features and DNA-BERT sequence embedding to produce predicted rate constants. As a result, the newly trained deep learning model predicted toehold-mediated strand displacement rate constants with a root mean square error of 0.76, during testing. These findings demonstrate that DNA-BERT can improve prediction accuracy, negating the need for extensive computational simulations or experimentation. Finally, the impact of various local features during model training is discussed, and a detailed comparison between the One-hot encoder and DNA-BERT sequences representation methods is presented.

Comparison of Aptamer Signaling Mechanisms Reveals Disparities in Sensor Response and Strategies to Eliminate False Signals

Aptamers are nucleic acid-based affinity reagents that have been incorporated into a variety of molecular sensor formats. However, many aptamer sensors exhibit insufficient sensitivity and specificity for real-world applications, and although considerable effort has been dedicated to improving sensitivity, sensor specificity has remained largely neglected and understudied. In this work, we have developed a series of sensors using aptamers for the small-molecule drugs flunixin, fentanyl, and furanyl fentanyl and compare their performance─in particular, focusing on their specificity. Contrary to expectations, we observe that sensors using the same aptamer operating under the same physicochemical conditions produce divergent responses to interferents depending on their signal transduction mechanism. For instance, aptamer beacon sensors are susceptible to false-positives from interferents that weakly associate with DNA, while strand-displacement sensors suffer from false-negatives due to interferent-associated signal suppression when both the target and interferent are present. Biophysical analyses suggest that these effects arise from aptamer-interferent interactions that are either nonspecific or induce aptamer conformational changes that are distinct from those induced by true target-binding events. We also demonstrate strategies for improving the sensitivity and specificity of aptamer sensors with the development of a "hybrid beacon," wherein the incorporation of a complementary DNA competitor into an aptamer beacon selectively hinders interferent─but not target─binding and signaling, while simultaneously overcoming signal suppression by interferents. Our results highlight the need for systematic and thorough testing of aptamer sensor response and new aptamer selection methods that optimize specificity more effectively than traditional counter-SELEX.

Targeted Selection of Aptamer Complementary Elements toward Rapid Development of Aptamer Transducers

Biosensing using aptamers has been a recent interest for their versatility in detecting many different analytes across a wide range of applications, including medical and environmental applications. In our last work, we introduced a customizable aptamer transducer (AT) that could successfully feed-forward many different output domains to target a variety of reporters and amplification reaction networks. In this paper, we explore the kinetic behavior and performance of novel ATs by modifying the aptamer complementary element (ACE) chosen based on a technique for exploring the ligand-binding landscape of duplexed aptamers. Using published data, we selected and constructed several modified ATs that contain ACEs with varying length, position of the start sites, and position of single mismatches, whose kinetic responses were tracked with a simple fluorescence reporter. A kinetic model for ATs was derived and used to extract the strand-displacement reaction constant k₁ and the effective aptamer dissociation constant K_d,eff, allowing us to calculate a relative performance metric, k₁/K_d,eff. Comparing our results with the predictions based on the literature data, we provide useful insight into the dynamics of the adenosine AT's duplexed aptamer domain and suggest a high-throughput approach for future ATs to be developed with improved sensitivity. The performance of our ATs showed a moderate correlation to those predicted by the ACE scan method. Here, we find that predicted performance based on our ACE selection method was moderately correlated to our AT's performance.

Luminescence-based detection and identification of illicit drugs

Luminescence-based sensing is capable of being used for the sensitive, rapid, and in some cases selective detection of chemicals. Furthermore, the method is amenable to incorporation into handheld low-power portable detectors that can be used in the field. Luminescence-based detectors are now commercially available for explosive detection with the technology built on a strong foundation of science. In contrast, there are fewer examples of luminescence-based detection of illicit drugs, despite the pervasive and global challenge of combating their manufacture, distribution and consumption and the need for handheld detection systems. This perspective describes the relatively nascent steps that have been reported in the use of luminescent materials for the detection of illicit drugs. Much of the published work has focused on detection of illicit drugs in solution with less work on vapour detection using thin luminescent sensing films. The latter are better suited for handheld sensing devices and detection in the field. Illicit drug detection has been achieved via different mechanisms, all of which change the luminescence of the sensing material. These include photoinduced hole transfer (PHT) leading to quenching of the luminescence, disruption of Förster energy transfer between different chromophores by a drug, and chemical reaction between the sensing material and a drug. The most promising of these is PHT, which can be used for rapid and reversible detection of illicit drugs in solution and film-based sensing of drugs in the vapour phase. However, there are still significant knowledge gaps, for example, how vapours of illicit drugs interact with the sensing films, and how to achieve selectivity for specific drugs.

Catalytic single-molecule Förster resonance energy transfer biosensor for uracil-DNA glycosylase detection and cellular imaging

Uracil-DNA glycosylase (UDG) is essential to the maintenance of genomic integrity due to its critical role in base excision repair pathway. However, existing UDG assays suffer from laborious procedures, poor specificity, and limited sensitivity. In this research, we construct a catalytic single-molecule Föster resonance energy transfer (FRET) biosensor for in vitro and in vivo biosensing of UDG activity. Target UDG can remove uracil base from the detection probe and cause the cleavage of detection probe by apurinic/apyrimidinic endonuclease (APE1), which exposes its toehold domain and initiates catalytic assembly of two fluorescently labeled hairpin probes via toehold-meditated strand displacement reaction (SDA) to generate abundant DNA duplexes with amplified FRET signal. In this assay, target UDG signal is amplified via enzyme-free catalytic reaction and the whole reaction may be completed in one step, which greatly simplifies the assay procedure, reduces the assay time, and facilitates the cellular imaging. This biosensor enables specific and sensitive measurement of UDG down to 0.00029 U/mL, and it is suitable for analyzing kinetic parameters, screening inhibitors, and even imaging endogenous UDG in live cells. Importantly, this biosensor can visually quantify various DNA repair enzymes by rationally altering DNA substrates.

Nanoarchitectonics for Abused-Drug Biosensors

Rapid, accessible, and highly accurate biosensors for the detection of addictive and abused drugs are needed to reduce the adverse personal and societal impacts of addiction. Modern sensors that utilize next-generation technologies, e.g., nanobiotechnology and nanoarchitectonics, have triggered revolutionary progress in the field as they allow accurate detection and tracking of trace levels of major classes of drugs. This paper reviews advances in the field of biosensors for the detection of commonly abused drugs, both prescribed such as codeine and morphine, and illegal narcotics like cocaine.

Real-Time Investigation of Intracellular Polynucleotide Kinase Using a Cascaded Amplification Circuit

Polynucleotide kinase (PNK) shows an in-depth correlationship with DNA repair and metabolism processes. The in situ visualization of intracellular PNK revealed an extremely biological significance in supplementing reliable and quantitative information on its spatiotemporal distribution in live cells. Herein, we developed a versatile cascaded DNA amplification circuit through the integration of catalytic DNA assembly and hybridization chain reaction circuits and realized the accurate evaluation of intracellular PNK activity via the Förster resonance energy transfer (FRET) principle. Initially, without PNK, trigger T was firmly caged in the PNK-recognizing hairpin H_T, resulting in no disturbance of the concatenated circuit. However, with the introduction of PNK, the 5'-OH terminal of PNK-addressing H_T was phosphorylated, then the phosphorylated H_T could be subsequently digested by λ exonuclease (λ Exo) to produce trigger T of the cascaded DNA circuit. As a result, the integrated circuit was stimulated to produce an amplified FRET signal for quantitatively monitoring the activity of PNK. Due to the λ Exo-specific digestion of 5'-phosphate DNA and the high signal gain of the cascade circuit, our proposed strategy enables the sensitive analysis of PNK activity in vitro and in complex biological samples. Furthermore, our PNK-sensing platform was extensively explored in HeLa cells for realizing reliable intracellular PNK imaging and thus showed high potential in the future diagnosis and treatment of kinase-related diseases.

DNA Nanodevices: from Mechanical Motions to Biomedical Applications

Inspired by molecular machines in nature, artificial nanodevices have been designed to realize various biomedical functions. Self-assembled deoxyribonucleic acid (DNA) nanostructures that feature designed geometries, excellent spatial accuracy, nanoscale addressability and marked biocompatibility provide an attractive candidate for constructing dynamic nanodevices with biomarker-targeting and stimuli-responsiveness for biomedical applications. Here, a summary of typical construction strategies of DNA nanodevices and their operating mechanisms are presented. We also introduced recent advances in employing DNA nanodevices as platforms for biosensing and intelligent drug delivery. Finally, the broad prospects and main challenges of the DNA nanodevices in biomedical applications are discussed.

Customizable Aptamer Transducer Network Designed for Feed-Forward Coupling

Solution-based biosensors that utilize aptamers have been engineered in a variety of formats to detect a range of analytes for both medical and environmental applications. However, since aptamers have fixed base sequences, incorporation of aptamers into DNA strand displacement networks for feed-forward signal amplification and processing requires significant redesign of downstream DNA reaction networks. We designed a novel aptamer transduction network that releases customizable output domains, which can then be used to initiate downstream strand displacement reaction networks without any sequence redesign of the downstream reaction networks. In our aptamer transducer (AT), aptamer input domains are independent of output domains within the same DNA complex and are reacted with a fuel strand after aptamer-ligand binding. ATs were designed to react with two fluorescent dye-labeled reporter complexes to show the customizability of the output domains, as well as being used as feed-forward inputs to two previously studied catalytic reaction networks, which can be used as amplifiers. Through our study, we show both successful customizability and feed-forward capability of our ATs.

Using dual exonucleases to finely distinguish structural adjustment of aptamers for small-molecule detection

The binding of small molecules to their DNA aptamers can modulate their susceptibility to digestion by exonucleases, however, absolute differentiation between digestion and inhibition has never been reported. Here, we show that the digestion of aptamers by T7 exonuclease can be completely inhibited upon binding of small-molecule targets and exploit this finding for the first time to achieve sensitive, label-free small-molecule detection. We use a quinine-binding aptamer to show that target binding entirely halts T7 exonuclease digestion, leaving behind an intact double-stranded product that retains strong target affinity. On the contrary, digestion of nontarget-bound aptamer produces a single-stranded product incapable of target binding. Exonuclease I efficiently eliminates these single-stranded products but is unable to digest the target-bound double-stranded product. The remaining products can be fluorescently quantified with SYBR Gold to determine target concentrations, giving a limit of detection of 100 nM with the linear range from 0 to 8 μM. We demonstrate the first example of a dual-exonuclease-mediated approach capable of producing a concentration-dependent response in terms of aptamer digestion modules, therefore improving performance of the current aptamer-based assay for small-molecule detection.

Dual exonucleases to finely distinguish structural adjustment of aptamers to produce absolute differentiation between digestion and inhibition.

Isothermal Self-Primer EXPonential Amplification Reaction (SPEXPAR) for Highly Sensitive Detection of Single-Stranded Nucleic Acids and Proteins

Development of versatile sensing methods for sensitive and specific detection of clinically relevant nucleic acids and proteins is of great value for disease monitoring and diagnosis. In this work, we propose a novel isothermal Self-primer EXPonential Amplification Reaction (SPEXPAR) strategy based on a rationally engineered structure-switchable Metastable Hairpin template (MH-template). The MH-template initially keeps inactive with its self-primer overhanging a part of target recognition region to inhibit polymerization. The present targets can specifically compel the MH-template to transform into an "activate" conformation that primes a target-recyclable EXPAR. The method is simple and sensitive, can accurately and facilely detect long-chain single-stranded nucleic acids or proteins without the need of exogenous primer probes, and has a high amplification efficiency theoretically more than 2ⁿ. For a proof-of-concept demonstration, the SPEXPAR method was used to sensitively detect the characteristic sequence of the typical swine fever virus (CSFV) RNA and thrombin, as nucleic acid and protein models, with limits of detection down to 43 aM and 39 fM, respectively, and even the CSFV RNA in attenuated vaccine samples and thrombin in diluted serum samples. The SPEXPAR method may serve as a powerful technique for the biological research of single-stranded nucleic acids and proteins.

Analysis of the role played by ligand-induced folding of the cocaine-binding aptamer in the photochrome aptamer switch assay

The Photochrome Aptamer Switch Assay (PHASA) relies on ligand binding by an aptamer to alter the local environment of a stilbene compound covalently attached to the 5' end of the aptamer. We used the PHASA with both structure switching and non-structure switching versions of the cocaine-binding aptamer. We show that the largest change in fluorescence intensity and the lowest concentration limit of detection (C_Loo_D) is obtained using the structure-switching cocaine-binding aptamer. Fluorescence anisotropy measurements were used to quantify the affinity of the conjugated aptamer to cocaine. We also used thermal melt analysis and Nuclear Magnetic Resonance (NMR) spectroscopy to show that the addition of the stilbene to the aptamer increases the melt temperature of the cocaine-bound structure-switching aptamer by (6.4 ± 0.3) °C compared to the unconjugated aptamer while the free form of the structure-switching aptamer-stilbene conjugate remains unfolded.

Nanomaterial-based aptamer sensors for analysis of illicit drugs and evaluation of drugs consumption for wastewater-based epidemiology

The abuse of illicit drugs usually associated with dramatic crimes may cause significant problems for the whole society. Wastewater-based epidemiology (WBE) has been demonstrated to be a novel and cost-effective way to evaluate the abuse of illicit drugs at the community level, and has been used as a routine method for monitoring and played a significant role for combating the crimes in some countries, e.g. China. The method can also provide temporal and spatial variation of drugs of abuse. The detection methods mainly remain on the conventional liquid chromatography coupled with mass spectrometry, which is extremely sensitive and selective, however needs advanced facility and well-trained personals, thus limit it in the lab. As an alternative, sensors have emerged to be a powerful analytical tool for a wide spectrum of analytes, in particular aptamer sensors (aptasensors) have attracted increasing attention and could act as an efficient tool in this field due to the excellent characteristics of selectivity, sensitivity, low cost, miniaturization, easy-to-use, and automation. In this review, we will briefly introduce the context, specific assessment process and applications of WBE and the recent progress of illicit drug aptasensors, in particular focusing on optical and electrochemical sensors. We then highlight several recent aptasensors for illicit drugs in new technology integration and discuss the feasibility of these aptasensor for WBE. We will summarize the challenges and propose our insights and opportunity on aptasensor for WBE to evaluate community-wide drug use trends and public health.

Fuzzy DNA Strand Displacement: A Strategy to Decrease the Complexity of DNA Network Design

Toehold-mediated DNA strand displacement endows DNA nanostructures with dynamic response capability. However, the complexity of sequence design dramatically increases as the size of the DNA network increases. We attribute this problem to the mechanism of toehold-mediated strand displacement, termed exact strand displacement (ESD), in which one input strand corresponds to one specific substrate. In this work, we propose an alternative to toehold-mediated DNA strand displacement, termed fuzzy strand displacement (FSD), in which one-to-many and many-to-one relationships are established between the input strand and the substrate, to reduce the complexity. We have constructed four modules, termed converter, reporter, fuzzy detector, and fuzzy trigger, and demonstrated that a sequence pattern recognition network composed of these modules requires less complex sequence design than an equivalent network based on toehold-mediated DNA strand displacement.

Coordination-driven assembly of a 3d-4f heterometallic organic framework with 1D Cu4I4 and Eu-based chains: syntheses, structures and various properties

A three-dimensional porous 3d-4f heterometallic organic framework, namely, {[Eu3(Cu4I4)3(INA)9(DMF)4]·3DMF}n (YNU-2), was successfully prepared under solvothermal conditions. There are two different one-dimensional metal chains in the structure, namely, Cu4I4 and EuIII-based chains, resulting in an excellent stability of the prepared sample. A N2 sorption isotherm at 77 K revealed that the activated sample exhibits a Brunauer-Emmett-Teller surface area of 371 m2 g-1, while, YNU-2 can adsorb obviously higher CO2 amounts than CH4 at 273 K and 298 K under 1 atm because of the stronger interaction force between CO2 and the porous skeleton. Furthermore, YNU-2 is highly efficient heterogeneous catalyst for chemical fixation of the CO2 and epoxides into cyclic carbonates with a preferable recyclability. Taking into account its excellent stability, the prepared sample can be used to construct an electrochemical adapter sensor for detecting cocaine with a detection limit of 0.27 pg mL-1 in the wide range of 0.001-0.5 ng mL-1.

Development of a highly sensitive detection method for TTX based on a magnetic bead-aptamer competition system under triple cycle amplification

We have established an assay that relies on aptamer and isothermal amplification for the tetrodotoxin (TTX)detection. The method uses triple cycle amplification (strand displacement amplification combined with catalytic hairpin assembly) and fluorescent reporter as an output signal. Free TTX and cDNA compete for binding to aptamer-modified magnetic beads. The cDNA collected by magnetic separation then used as a primer to trigger triple cycle amplification to obtain more ssDNA. The ssDNA combined with the reporter probe, and the original quenched fluorescence can be recovered. In addition, a linear relationship between fluorescence spectrum and different target concentrations is revealed. This method allows TTX to be detected by fluorometry with a detection limit as low as 0.265 pg mL^-1. It was applied to clams and shellfish, achieving recoveries ranging from 100% to 107.33% and 99.67%-116.67%, respectively. The results were consistent with the commercial TTX ELISA kit. This assay is highly sensitive, reliable and has a good specificity. Therefore, it provides a better alternative to the standard method for quantitative detection of TTX.

Leak-free million-fold DNA amplification with locked nucleic acid and targeted hybridization in one pot

An isothermal cascade reaction that exponentially amplifies pre-designed, single-stranded DNA as a sensor and signal amplifier module for DNA-based computing and molecular robotics was developed. Taking advantage of the finding that locked nucleic acid can suppress problematic ab initio DNA synthesis, up to million-fold amplification rates and concurrent hybridization were achieved at a physiological temperature in a single reactor. Although the effect of locked nucleic acid introduction to the templates was complicated, undesired leak DNA amplification was generally suppressed in the amplification reaction for distinct DNA sequences. The present reaction that senses one DNA as an input and generates a large amount of another DNA as an output, exhibiting a high correlation between the molecular concentration and the amplification time, is applicable for nucleic acid quantification.

Innovative engineering and sensing strategies for aptamer-based small-molecule detection

Aptamers are nucleic acid-based affinity reagents that have gained widespread attention as biorecognition elements for the detection of targets such as ions, small molecules, and proteins. Over the past three decades, the field of aptamer-based sensing has grown considerably. However, the advancement of aptamer-based small-molecule detection has fallen short of the high demand for such sensors in applications such as diagnostics, environmental monitoring, and forensics. This is due to two challenges: the complexity of developing generalized sensing platforms and the poor sensitivities of assays targeting small molecules. This paper will review new approaches for the streamlined development of high-performance aptamer-based sensors for small-molecule detection. We here provide historical context, explore the current state-of-the art, and offer future directions-with emphasis placed on new aptamer engineering methods, the use of cooperative binding, and label-free approaches using fully-folded, high-affinity aptamers for small-molecule sensing.

Anti-VEGF-Aptamer Modified C-Dots-A Hybrid Nanocomposite for Topical Treatment of Ocular Vascular Disorders

The vascular endothelial growth factor (VEGF) induces pathological angiogenetic ocular diseases. It is a scientific challenge to develop carriers for the controlled release of inhibitors for VEGF present in the back of the eye domain. Carbon dots (C-dots) functionalized with the VEGF aptamer are introduced and the hybrid nanoparticles are used for ocular nanomedicine. The C-dots are applied as effective carriers of the anti-VEGF aptamer across the cornea, yielding therapeutic levels upon topical administration. The hybrids show no toxicity for both in vitro and in vivo murine animal model, and further enable noninvasive intraocular concentration monitoring through the C-dots inherent fluorescence. In addition, the hybrid C-dots effectively inhibit VEGF-stimulated angiogenesis in choroidal blood vessels. This inhibition is comparable to two commercially available anti-VEGF drugs, bevacizumab and aflibercept. The hybrid aptamer-modified C-dots provide a versatile nanomaterial to treat age-related macular degeneration and diabetic retinopathy.

Duplexed aptamers: history, design, theory, and application to biosensing

Nucleic acid aptamers are single stranded DNA or RNA sequences that specifically bind a cognate ligand. In addition to their widespread use as stand-alone affinity binding reagents in analytical chemistry, aptamers have been engineered into a variety of ligand-specific biosensors, termed aptasensors. One of the most common aptasensor formats is the duplexed aptamer (DA). As defined herein, DAs are aptasensors containing two nucleic acid elements coupled via Watson-Crick base pairing: (i) an aptamer sequence, which serves as a ligand-specific receptor, and (ii) an aptamer-complementary element (ACE), such as a short DNA oligonucleotide, which is designed to hybridize to the aptamer. The ACE competes with ligand binding, such that DAs generate a signal upon ligand-dependent ACE-aptamer dehybridization. DAs possess intrinsic advantages over other aptasensor designs. For example, DA biosensing designs generalize across DNA and RNA aptamers, DAs are compatible with many readout methods, and DAs are inherently tunable on the basis of nucleic acid hybridization. However, despite their utility and popularity, DAs have not been well defined in the literature, leading to confusion over the differences between DAs and other aptasensor formats. In this review, we introduce a framework for DAs based on ACEs, and use this framework to distinguish DAs from other aptasensor formats and to categorize cis- and trans-DA designs. We then explore the ligand binding dynamics and chemical properties that underpin DA systems, which fall under conformational selection and induced fit models, and which mirror classical SN1 and SN2 models of nucleophilic substitution reactions. We further review a variety of in vitro and in vivo applications of DAs in the chemical and biological sciences, including riboswitches and riboregulators. Finally, we present future directions of DAs as ligand-responsive nucleic acids. Owing to their tractability, versatility and ease of engineering, DA biosensors bear a great potential for the development of new applications and technologies in fields ranging from analytical chemistry and mechanistic modeling to medicine and synthetic biology.

Principles and Applications of Nucleic Acid Strand Displacement Reactions

Dynamic DNA nanotechnology, a subfield of DNA nanotechnology, is concerned with the study and application of nucleic acid strand-displacement reactions. Strand-displacement reactions generally proceed by three-way or four-way branch migration and initially were investigated for their relevance to genetic recombination. Through the use of toeholds, which are single-stranded segments of DNA to which an invader strand can bind to initiate branch migration, the rate with which strand displacement reactions proceed can be varied by more than 6 orders of magnitude. In addition, the use of toeholds enables the construction of enzyme-free DNA reaction networks exhibiting complex dynamical behavior. A demonstration of this was provided in the year 2000, in which strand displacement reactions were employed to drive a DNA-based nanomachine (Yurke, B.; et al. Nature 2000, 406, 605-608). Since then, toehold-mediated strand displacement reactions have been used with ever increasing sophistication and the field of dynamic DNA nanotechnology has grown exponentially. Besides molecular machines, the field has produced enzyme-free catalytic systems, all DNA chemical oscillators and the most complex molecular computers yet devised. Enzyme-free catalytic systems can function as chemical amplifiers and as such have received considerable attention for sensing and detection applications in chemistry and medical diagnostics. Strand-displacement reactions have been combined with other enzymatically driven processes and have also been employed within living cells (Groves, B.; et al. Nat. Nanotechnol. 2015, 11, 287-294). Strand-displacement principles have also been applied in synthetic biology to enable artificial gene regulation and computation in bacteria. Given the enormous progress of dynamic DNA nanotechnology over the past years, the field now seems poised for practical application.

Growing prospects of DNA nanomaterials in novel biomedical applications

As an important genetic material for life, DNA has been investigated widely in recent years, especially in interdisciplinary fields crossing nanomaterials and biomedical applications. It plays an important role because of its extraordinary molecular recognition capability and novel conformational polymorphism. DNA is also a powerful and versatile building block for the fabrication of nanostructures and nanodevices. Such DNA-based nanomaterials have also been successfully applied in various aspects ranging from biosensors to biomedicine and special logic gates, as well as in emerging molecular nanomachines. In this present mini-review, we briefly overview the recent progress in these fields. Furthermore, some challenges are also discussed in the conclusions and perspectives section, which aims to stimulate broader scientific interest in DNA nanotechnology and its biomedical applications.

Recent progress in DNA-based nanomaterials is summarized, ranging from applications in biosensors, biomedicine/imaging, and molecular logic gates to emerging nanomachines, as well as future perspective discussions.

DNA-Responsive SiO2 Nanoparticles, Metal-Organic Frameworks, and Microcapsules for Controlled Drug Release

Recent advances addressing the development of stimuli-responsive nucleic acid (DNA)-functionalized micro/nanocarriers for the controlled release of drugs are presented. The DNA associated with the drug-loaded carriers acts as capping units that lock the drugs in the carriers. In the presence of appropriate triggers, the capping units are unlocked, resulting in the release of the drugs. Three types of DNA-modified carriers are discussed, including mesoporous SiO₂ nanoparticles (MP SiO₂ NPs), metal-organic framework nanoparticles (NMOFs) and micro/nanocapsules. The triggers to unlock the DNA gating units include pH, the dissociation of K⁺-stabilized G-quadruplexes in the presence of crown ethers, the catalytic dissociation of the capping units by enzymes or DNAzymes, the dissociation of capping units by the formation of aptamer-ligand complexes (particularly ligands acting as biomarkers for different diseases), and the use of light for the photochemical unlocking of the DNA gates. Different issues related to the targeting of the different drug-loaded carriers to cancer cells, the switchable ON/OFF release of the drug loads, and the selective cytotoxicity of the drug-loaded carriers toward cancer cells are discussed. Finally, the future perspectives of the stimuli-responsive DNA-based, drug-loaded micro/nanocarriers for future nanomedicine and, in particular, the development of autonomous sense-and-treat systems are addressed.

Electrochemical detection of tobramycin based on enzymes-assisted dual signal amplification by using a novel truncated aptamer with high affinity

An aptamer with the length of only 15 nucleotides specific for tobramycin was obtained through rationally designed truncation from a previously reported long sequence. The structural and binding properties of the aptamer were characterized. The dissociation constant (K_d) was determined to be 42.12 nM, indicating high affinity of the aptamer for tobramycin. Then an electrochemical sensor based on this aptamer was developed, which employed an enzymes-assisted dual signal amplification cycle through target recycling and strand-displacement DNA polymerization. A hairpin probe containing the aptamer sequence was designed and used to start the production cycle of a short ssDNA fragment in the presence of tobramycin, with the help of phi29 DNA polymerase and nicking endonuclease Nt.AlwI. The ssDNA fragment was captured by a signal transduction probe modified on gold electrode to form a triple-helix structure. With the help of [Ru(NH₃)₆]³⁺, a significant electrochemical signal was observed in differential pulse voltammetry (DPV). Under the optimal conditions, the current in DPV is linearly related with the concentration of tobramycin in the range of 10-200 nM, and the detection limit is 5.13 nM. The electrochemical sensor showed high specificity for tobramycin when it was challenged by other antibiotics. In addition, the constructed sensor was used to detect tobramycin in milk and water samples, and showed satisfactory performance. Therefore, the screened aptamer as well as the developed sensor has great application prospects in the fields of food safety control, medical test and environment monitoring.

Nanotribological Study of Supramolecular Template Networks Induced by Hydrogen Bonds and van der Waals Forces

Nanotribology has been given increasing attention by researchers in pursuing the nature of friction. In the present work, an approach that combines the supramolecular assembly and nanotribology is introduced. Herein, the nanotribological study was carried out on seven supramolecular template networks [namely, hydrogen bond induced tricarboxylic acids and van der Waals force induced hexaphenylbenzene (HPB) derivatives]. The template networks, as well as the host-guest assemblies of template molecules induced by different forces, were constructed on the highly oriented pyrolytic graphite (HOPG) surface and explicitly characterized using scanning tunneling microscopy (STM). Meanwhile, the nanotribological properties of the template networks were measured using atomic force microscopy (AFM). Together with the theoretical calculation using the density functional theory (DFT) method, it was revealed that the friction coefficients were positively correlated with the interaction strength. The frictional energy dissipation mainly derives from both the intermolecular interaction energy and the interaction energy between molecules and the substrate. The efforts not only help us gain insight into the competitive mechanisms of hydrogen bond and van der Waals force in supramolecular assembly but also shed light on the origin of friction and the relationship between the assembly structures and the nanotribological properties at the molecular level.

Application of DNA Machineries for the Barcode Patterned Detection of Genes or Proteins

The study introduces an analytical platform for the detection of genes or aptamer-ligand complexes by nucleic acid barcode patterns generated by DNA machineries. The DNA machineries consist of nucleic acid scaffolds that include specific recognition sites for the different genes or aptamer-ligand analytes. The binding of the analytes to the scaffolds initiate, in the presence of the nucleotide mixture, a cyclic polymerization/nicking machinery that yields displaced strands of variable lengths. The electrophoretic separation of the resulting strands provides barcode patterns for the specific detection of the different analytes. Mixtures of DNA machineries that yield, upon sensing of different genes (or aptamer ligands), one-, two-, or three-band barcode patterns are described. The combination of nucleic acid scaffolds acting, in the presence of polymerase/nicking enzyme and nucleotide mixture, as DNA machineries, that generate multiband barcode patterns provide an analytical platform for the detection of an individual gene out of many possible genes. The diversity of genes (or other analytes) that can be analyzed by the DNA machineries and the barcode patterned imaging is given by the Pascal's triangle. As a proof-of-concept, the detection of one of six genes, that is, TP53, Werner syndrome, Tay-Sachs normal gene, BRCA1, Tay-Sachs mutant gene, and cystic fibrosis disorder gene by six two-band barcode patterns is demonstrated. The advantages and limitations of the detection of analytes by polymerase/nicking DNA machineries that yield barcode patterns as imaging readout signals are discussed.

Chromogenic and Fluorogenic Probes for the Detection of Illicit Drugs

The consumption of illicit drugs has increased exponentially in recent years and has become a problem that worries both governments and international institutions. The rapid emergence of new compounds, their easy access, the low levels at which these substances are able to produce an effect, and their short time of permanence in the organism make it necessary to develop highly rapid, easy, sensitive, and selective methods for their detection. Currently, the most widely used methods for drug detection are based on techniques that require large measurement times, the use of sophisticated equipment, and qualified personnel. Chromo- and fluorogenic methods are an alternative to those classical procedures.

A fuel-limited isothermal DNA machine for the sensitive detection of cellular deoxyribonucleoside triphosphates

A fuel-limited isothermal DNA machine has been built for the sensitive fluorescence detection of cellular deoxyribonucleoside triphosphates (dNTPs) at the fmol level, which greatly reduces the required sample cell number. Upon the input of the limiting target dNTP, the machine runs automatically at 37 °C without the need for higher temperature.

Label-free and ultrasensitive detection of polynucleotide kinase activity at the single-cell level

We develop a label-free fluorescence method for the polynucleotide kinase assay at the single-cell level based on phosphorylation-triggered isothermal exponential amplification.

A simple fluorescence biosensing strategy for ultrasensitive detection of the BCR–ABL1 fusion gene based on a DNA machine and multiple primer-like rolling circle amplification

A one-step, rapid fluorescence biosensing method has been developed for ultrasensitive detection of BCR–ABL1 fusion gene based on a DNA machine and multiple primer-like rolling circle amplification.

Analysis of the interaction between the cocaine-binding aptamer and its ligands using fluorescence spectroscopy

We used fluorescence spectroscopy to measure the binding affinity and provide new insights into the binding mechanism of cocaine and quinine with the cocaine-binding DNA aptamer. Using the intrinsic fluorescence of quinine and cocaine, we have observed quenching of ligand fluorescence upon binding of the aptamer. Quantification of this quenching provides an easy method to measure the binding constant using small amounts of sample. The observed quenching coupled with a red shift of the Stokes shift in the emission spectrum indicates that quinine and cocaine interact with the aptamer through stacking interactions.

Nicking enzyme-controlled toehold regulation for DNA logic circuits

DNA strand displacement is widely used in DNA-related nanoengineering for its remarkable specificity and predictability. We report a nicking enzyme-assisted mechanism to regulate strand displacement, where DNA toeholds are dynamically controlled. To demonstrate the strategy, a protein/DNA-based Boolean operation system is constructed and based on it a two-channel multiplexer controlled by three different nicking enzymes is realized. The proposed regulatory mechanism can be used for switch logic statement and bridges protein and DNA logic circuits.

Two-Dimensional Zirconium-Based Metal-Organic Framework Nanosheet Composites Embedded with Au Nanoclusters: A Highly Sensitive Electrochemical Aptasensor toward Detecting Cocaine

Two-dimensional (2D) zirconium-based metal-organic framework nanosheets embedded with Au nanoclusters (denoted as 2D AuNCs@521-MOF) were prepared via a one-pot method under mild conditions. The optimized 2D AuNCs@521-MOF nanosheets not only possessed high specific surface area, physicochemical stability, and good electrochemical activity but also exhibited strong bioaffinity toward biomolecule-bearing phosphate groups. Consequently, a large amount of cocaine aptamer strands can be immobilized onto the substrate modified by 2D AuNCs@521-MOF nanosheet, further leading to the formation of a constructed biosensitive platform, which can be used to successfully detect cocaine through the specific binding interactions between cocaine and aptamer strands. The results demonstrated that the 2D AuNCs@521-MOF-based aptasensor had high sensitivity for detecting cocaine within the broad concentration range of 0.001-1.0 ng·mL^-1 and the low limit of detection of 1.29 pM (0.44 pg·mL^-1) and 2.22 pM (0.75 pg·mL^-1) as determined by electrochemical impedance spectroscopy and differential pulse voltammetry, respectively. As expected, with the advantages of high selectivity, repeatability, stability, and simple operation, this new strategy is believed to exhibit great potential for simple and convenient detection of cocaine.

Salt-mediated two-site ligand binding by the cocaine-binding aptamer

Multisite ligand binding by proteins is commonly utilized in the regulation of biological systems and exploited in a range of biochemical technologies. Aptamers, although widely utilized in many rationally designed biochemical systems, are rarely capable of multisite ligand binding. The cocaine-binding aptamer is often used for studying and developing sensor and aptamer-based technologies. Here, we use isothermal titration calorimetry (ITC) and NMR spectroscopy to demonstrate that the cocaine-binding aptamer switches from one-site to two-site ligand binding, dependent on NaCl concentration. The high-affinity site functions at all buffer conditions studied, the low-affinity site only at low NaCl concentrations. ITC experiments show the two ligand-binding sites operate independently of one another with different affinities and enthalpies. NMR spectroscopy shows the second binding site is located in stem 2 near the three-way junction. This ability to control ligand binding at the second site by adjusting the concentration of NaCl is rare among aptamers and may prove a useful in biotechnology applications. This work also demonstrates that in vitro selected biomolecules can have functions as complex as those found in nature.

Thrombin aptasensor enabled by Pt nanoparticles-functionalized Co-based metal organic frameworks assisted electrochemical signal amplification

In this work, a Pt nanoparticles-functionalized Co-based metal organic frameworks (PtNPs@Co(II)MOFs@PtNPs) was synthesized and applied in electrochemical aptasensor for thrombin (TB) detection. First, the Co(II)MOFs@PtNPs were prepared via the mixed solvothermal method, which consists of inner Pt nanoparticles (PtNPs) encapsulated by aminofunctionalized Co(II)MOFs materials. Following that, additional PtNPs were adsorbed on the surface of Co(II)MOFs@PtNPs, resulting in the formation of PtNPs@Co(II)MOFs@PtNPs nanocomposite. The PtNPs@Co(II)MOFs@PtNPs nanocomposites with a large surface area were implimented as nanocarriers to immobilize a mass of TBA II for the formation of the TBA II bioconjugates that could be captured onto the electrode surface by sandwich-type format. Moreover, the PtNPs@Co(II)MOFs@PtNPs nanocomposites could directly use as redox tags for charge-generating and electron-transporting with the electron transfer from Co(II) to Co(III). Furthermore, in the presence of H₂O₂, the PtNPs@Co(II)MOF@PtNPs could effectively catalyze H₂O₂ oxidation with improvement electron transfer of redox probe, resulting in electrochemical signal amplification. Based on the above superior advantages, TB was determined in the concentration range from 0.1pM to 50nM with a detection limit of 0.33fM. Furthermore, the excellent sensitivity and selectivity can be easily established for quantitative analysis of other analytes.

Complementary oligonucleotides regulate induced fit ligand binding in duplexed aptamers

Duplexed aptamers (DAs) are engineered by hybridizing an aptamer-complementary element (ACE, e.g. a DNA oligonucleotide) to an aptamer; to date, ACEs have been presumed to sequester the aptamer into a non-binding duplex state, in line with a conformational selection-based model of ligand binding. Here, we uncover that DAs can actively bind a ligand from the duplex state through an ACE-regulated induced fit mechanism. Using a widely-studied ATP DNA aptamer and a solution-based equilibrium assay, DAs were found to exhibit affinities up to 1 000 000-fold higher than predicted by conformational selection alone, with different ACEs regulating the level of induced fit binding, as well as the cooperative allostery of the DA (Hill slope of 1.8 to 0.7). To validate these unexpected findings, we developed a non-equilibrium surface-based assay that only signals induced fit binding, and corroborated the results from the solution-based assay. Our findings indicate that ACEs regulate ATP DA ligand binding dynamics, opening new avenues for the study and design of ligand-responsive nucleic acids.

Computational Biosensors: Molecules, Algorithms, and Detection Platforms

Advanced nucleic acid-based sensor-applications require computationally intelligent biosensors that are able to concurrently perform complex detection and classification of samples within an in vitro platform. Realization of these cutting-edge computational biosensor systems necessitates innovation and integration of three key technologies: molecular probes with computational capabilities, algorithmic methods to enable in vitro computational post processing and classification, and immobilization and detection approaches that enable the realization of deployable computational biosensor platforms. We provide an overview of current technologies, including our contributions towards the development of computational biosensor systems.

Interfacial assembly structures and nanotribological properties of saccharic acids

The larger friction of the successfully constructed assembly of saccharic acid indicates the higher potential energy barrier at the interface.