Regioselective lithium diisopropylamide-mediated ortholithiation of 1-chloro-3-(trifluoromethyl)benzene: role of autocatalysis, lithium chloride catalysis, and reversibility

Ketone Enolization with Sodium Hexamethyldisilazide: Solvent- and Substrate-Dependent E-Z Selectivity and Affiliated Mechanisms

Ketone enolization by sodium hexamethyldisilazide (NaHMDS) shows a marked solvent and substrate dependence. Enolization of 2-methyl-3-pentanone reveals E-Z selectivities in Et₃N/toluene (20:1), methyl-t-butyl ether (MTBE, 10:1), N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDTA)/toluene (8:1), TMEDA/toluene (4:1), diglyme (1:1), DME (1:22), and tetrahydrofuran (THF) (1:90). Control experiments show slow or nonexistent stereochemical equilibration in all solvents except THF. Enolate trapping with Me₃SiCl/Et₃N requires warming to -40 °C whereas Me₃SiOTf reacts within seconds. In situ enolate trapping at -78 °C using preformed NaHMDS/Me₃SiCl mixtures is effective in Et₃N/toluene yet fails in THF by forming (Me₃Si)₃N. Rate studies show enolization via mono- and disolvated dimers in Et₃N/toluene, disolvated dimers in TMEDA, trisolvated monomers in THF/toluene, and free ions with PMDTA. Density functional theory computations explore the selectivities via the E- and Z-based transition structures. Failures of theory-experiment correlations of ionic fragments were considerable even when isodesmic comparisons could have canceled electron correlation errors. Swapping 2-methyl-3-pentanone with a close isostere, 2-methylcyclohexanone, causes a fundamental change in the mechanism to a trisolvated-monomer-based enolization in THF.

α-C-H/N-H Annulation of Alicyclic Amines via Transient Imines: Preparation of Polycyclic Lactams

Polycyclic lactams are prepared in a single operation from o-toluamides and cyclic amines in a process that involves transient cyclic imines, species that are conveniently obtained in situ from the corresponding lithium amides and simple ketone oxidants. Imines thus generated, such as 1-pyrroline and 1-piperideine, engage lithiated o-toluamides in a facile annulation process. Undesired side reactions such as imine deprotonation and o-toluamide dimerization are suppressed through the judicious choice of reaction conditions.

Complexation behaviour of LiCl and LiPF6– model studies in the solid-state and in solution using a bidentate picolyl-based ligand

Using a new bulky bidentate ligand and combining various structure elucidation methods, coordination modes of [ligand·LiX] (X = Cl, PF₆) complexes both in solid-state and in solution have been revealed.

Chemical Systems Involving Two Competitive Self-Catalytic Reactions

Self-catalytic reactions are chemical phenomena, in which a product catalyzes the reactions of substrates further to yield products. A significant amplification of product concentration occurs during the reactions in a dilute solution, which exhibit notable properties such as sigmoidal kinetics, seeding effects, and thermal hysteresis. Chemical systems involving two competitive self-catalytic reactions can be considered, in which the competitive formation of two products occurs, which is affected by environmental changes, subtle perturbations, and fluctuations, and notable chemical phenomena appear such as formation of different structures in response to slow/fast temperature changes, chiral symmetry breaking, shortcut in reaction time, homogeneous-heterogeneous transitions, and mechanical responses. Studies on such chemical systems provide understanding on biological systems and can also be extended to the development of novel functional materials.

Deprotonative Metalation of Methoxy-Substituted Arenes Using Lithium 2,2,6,6-Tetramethylpiperidide: Experimental and Computational Study

The reaction pathways of lithium 2,2,6,6-tetramethylpiperidide (LiTMP)-mediated deprotonative metalation of methoxy-substituted arenes were investigated. Importantly, it was experimentally observed that, whereas TMEDA has no effect on the course of the reactions, the presence of more than the stoichiometric amount of LiCl is deleterious, in particular without an in situ trap. These effects were corroborated by the DFT calculations. The reaction mechanisms, such as the structure of the active species in the deprotonation event, the reaction pathways by each postulated LiTMP complex, the stabilization effects by in situ trapping using zinc species, and some kinetic interpretation, are discussed herein.

The Future of Polar Organometallic Chemistry Written in Bio-Based Solvents and Water

There is a strong imperative to reduce the release of volatile organic compounds (VOCs) into the environment, and many efforts are currently being made to replace conventional hazardous VOCs in favour of safe, green and bio-renewable reaction media that are not based on crude petroleum. Recent ground-breaking studies from a few laboratories worldwide have shown that both Grignard and (functionalised) organolithium reagents, traditionally handled under strict exclusion of air and humidity and in anhydrous VOCs, can smoothly promote both nucleophilic additions to unsaturated substrates and nucleophilic substitutions in water and other bio-based solvents (glycerol, deep eutectic solvents), competitively with protonolysis, at room temperature and under air. The chemistry of polar organometallics in the above protic media is a complex phenomenon influenced by several factors, and understanding its foundational character is stimulating in the perspective of the development of a sustainable organometallic chemistry.

Case for Lithium Tetramethylpiperidide-Mediated Ortholithiations: Reactivity and Mechanisms

Rate and mechanistic studies of ortholithiations by lithium 2,2,6,6-tetramethylpiperidide focus on four arenes: 1,4-bis(trifluoromethyl)benzene, 1,3-bis(trifluoromethyl)benzene, 1,3-dimethoxybenzene, and 4,4-dimethyl-2-phenyl-2-oxazoline. Metalations occur via substrate-dependent combinations of monosolvated monomer, disolvated monomer, and tetrasolvated dimer (triple ions). Density functional theory computational studies augment the experimental data. We discuss the challenges presented by shifting dimer-monomer proportions in determining the observable reaction orders and our mathematical treatment of such shifting in reactant structure.

Hydrolysis of organometallic and metal–amide precursors: synthesis routes to oxo-bridged heterometallic complexes, metal-oxo clusters and metal oxide nanoparticles

Organometallic and metal amide reagents react with –OH groups to generate metal–oxygen connectivity, yielding metal-oxo heterobimetallics, clusters and nanoparticles.

Sodium Diisopropylamide in Tetrahydrofuran: Selectivities, Rates, and Mechanisms of Arene Metalations

Sodium diisopropylamide (NaDA)-mediated metalations of arenes in tetrahydrofuran (THF)/hexane or THF/Me₂NEt solutions are described. A survey of >40 benzenoid- and pyridine-based arenes with a range of substituents demonstrates the efficacy and regioselectivity of metalation. Metalations of activated disubstituted arenes and selected monosubstituted arenes are rapid at -78 °C. Rate studies of 1,3-dimethoxybenzene and related methoxylated arenes show exclusively monomer-based orthometalations with two or three coordinated THF ligands. Rate studies of the isotopic exchange of benzene and monosubstituted arenes with weakly activating groups reveal analogous di- and trisolvated monomer-based metalations. Cooperative inductive, mesomeric, steric, and chelate effects are discussed.

Lithium Diisopropylamide: Nonequilibrium Kinetics and Lessons Learned about Rate Limitation

The kinetics of lithium diisopropylamide (LDA) in tetrahydrofuran under nonequilibrium conditions are reviewed. These conditions correspond to a class of substrates in which the rates of LDA aggregation and solvation events are comparable to the rates at which various fleeting intermediates react with substrate. Substrates displaying these reactivities, by coincidence, happen to be those that react at tractable rates on laboratory time scales at -78 °C. In this strange region of nonlimiting behavior, rate-limiting steps are often poorly defined, sometimes involve deaggregation, and at other times include reaction with substrate. Changes in conditions routinely cause shifts in the rate-limiting steps, and autocatalysis is prevalent and can be acute. The studies are described in three distinct portions: (1) methods and strategies used to deconvolute complex reaction pathways, (2) the resulting conclusions about organolithium reaction mechanisms, and (3) perspectives on the concept of rate limitation reinforced by studies of LDA in tetrahydrofuran at -78 °C under nonequilibrium conditions.

Lithium Hexamethyldisilazide-Mediated Enolization of Acylated Oxazolidinones: Solvent, Cosolvent, and Isotope Effects on Competing Monomer- and Dimer-Based Pathways

Lithium hexamethyldisilazide (LiHMDS)-mediated enolization of (+)-4-benzyl-3-propionyl-2-oxazolidinone in THF-hydrocarbon mixtures shows unusual sensitivity to the choice of hydrocarbon cosolvent (hexane versus toluene) and to isotopic labeling. Four mechanisms corresponding to monosolvated monomers, trisolvated dimers, octasolvated monomers, and octasolvated dimers were identified. Even under conditions in which the LiHMDS monomer was the dominant observable form, dimer-based metalation was significant. The mechanism-dependent isotope and cosolvent effects are discussed in the context of ground-state stabilization and transition-state tunneling.

Sodium Diisopropylamide in N,N-Dimethylethylamine: Reactivity, Selectivity, and Synthetic Utility

The reactivities and chemoselectivities of sodium diisopropylamide (NaDA) in N,N-dimethylethylamine (DMEA) are compared with those of lithium diisopropylamide (LDA) in tetrahydrofuran (THF). Metalations of arenes, epoxides, ketones, hydrazones, dienes, and alkyl and vinyl halides are represented. The positive attributes of NaDA-DMEA include high solubility, stability, resistance to solvent decomposition, and ease of preparation. The high reactivities and chemoselectivities often complement those of LDA-THF.

Functionalizations of Mixtures of Regioisomeric Aryllithium Compounds by Selective Trapping with Dichlorozirconocene

The reaction of mixtures of aryllithium regioisomers obtained either by directed lithiation or by Br/Li exchange with substoichiometric amounts of Cp₂ZrCl₂ proceeds with high regioselectivity. The least sterically hindered regioisomeric aryllithium is selectively transmetalated to the corresponding arylzirconium species leaving the more hindered aryllithium ready for various reactions with electrophiles. As an application, these regioselective transmetalations from Li to Zr were used to prepare all three lithiated regioisomers of 1,3‐bis(trifluoromethyl)benzene.

Exceedingly Facile Ph-X Activation (X = Cl, Br, I) with Ruthenium(II): Arresting Kinetics, Autocatalysis, and Mechanisms

[(Ph3P)3Ru(L)(H)2] (where L = H2 (1) in the presence of styrene, Ph3P (3), and N2 (4)) cleave the Ph-X bond (X = Cl, Br, I) at RT to give [(Ph3P)3RuH(X)] (2) and PhH. A combined experimental and DFT study points to [(Ph3P)3Ru(H)2] as the reactive species generated upon spontaneous loss of L from 3 and 4. The reaction of 3 with excess PhI displays striking kinetics which initially appears zeroth order in Ru. However mechanistic studies reveal that this is due to autocatalysis comprising two factors: 1) complex 2, originating from the initial PhI activation with 3, is roughly as reactive toward PhI as 3 itself; and 2) the Ph-I bond cleavage with the just-produced 2 gives rise to [(Ph3P)2RuI2], which quickly comproportionates with the still-present 3 to recover 2. Both the initial and onward activation reactions involve PPh3 dissociation, PhI coordination to Ru through I, rearrangement to a η(2)-PhI intermediate, and Ph-I oxidative addition.

Mechanism of Lithium Diisopropylamide-Mediated Ortholithiation of 1,4-Bis(trifluoromethyl)benzene under Nonequilibrium Conditions: Condition-Dependent Rate Limitation and Lithium Chloride-Catalyzed Inhibition

Lithiation of 1,4-bis(trifluoromethyl)benzene with lithium diisopropylamide in tetrahydrofuran at -78 °C occurs under conditions at which the rates of aggregate exchanges are comparable to the rates of metalation. Under such nonequilibrium conditions, a substantial number of barriers compete to be rate limiting, making the reaction sensitive to trace impurities (LiCl), reactant concentrations, and isotopic substitution. Rate studies using the perdeuterated arene reveal odd effects of LiCl, including catalyzed rate acceleration at lower temperature and catalyzed rate inhibition at higher temperatures. The catalytic effects are accompanied by corresponding changes in the rate law. A kinetic model is presented that captures the critical features of the LiCl catalysis, focusing on the influence of LiCl-catalyzed re-aggregation of the fleeting monomer that can reside above, at, or below the equilibrium population without catalyst.

Development of a web-based platform for studying lithiation reactions in silico

A novel integrated web-based system has been developed to rationalise and predict lithiation reactions in silico.

Lithium diisopropylamide-mediated lithiation of 1,4-difluorobenzene under nonequilibrium conditions: role of monomer-, dimer-, and tetramer-based intermediates and lessons about rate limitation

Lithiation of 1,4-difluorobenzene with lithium diisopropylamide (LDA) in THF at -78 °C joins the ranks of a growing number of metalations that occur under conditions in which the rates of aggregate exchanges are comparable to the rates of metalation. As such, a substantial number of barriers vie for rate limitation. Rate studies reveal that rate-limiting steps and even the choice of reaction coordinate depend on subtle variations in concentration. Deuteration shifts the rate-limiting step and markedly alters the concentration dependencies and overall rate law. This narrative is less about ortholithiation per se and more about rate limitation and the dynamics of LDA aggregate exchange.

Molecular salt effects in the gas phase: tuning the kinetic basicity of [HCCLiCl]⁻ and [HCCMgCl₂]⁻ by LiCl and MgCl₂

A combination of gas-phase ion-molecule reaction experiments and theoretical kinetic modeling is used to examine how a salt can influence the kinetic basicity of organometallates reacting with water. [HC≡CLiCl](-) reacts with water more rapidly than [HC≡CMgCl2](-), consistent with the higher reactivity of organolithium versus organomagnesium reagents. Addition of LiCl to [HC≡CLiCl](-) or [HC≡CMgCl2](-) enhances their reactivity towards water by a factor of about 2, while addition of MgCl2 to [HC≡CMgCl2](-) enhances its reactivity by a factor of about 4. Ab initio calculations coupled with master equation/RRKM theory kinetic modeling show that these reactions proceed via a mechanism involving formation of a water adduct followed by rearrangement, proton transfer, and acetylene elimination as either discrete or concerted steps. Both the energy and entropy requirements for these elementary steps need to be considered in order to explain the observed kinetics.

Enediolate-dilithium amide mixed aggregates in the enantioselective alkylation of arylacetic acids: structural studies and a stereochemical model

A combination of X-ray crystallography, (6)Li, (15)N, and (13)C NMR spectroscopies, and density functional theory computations affords insight into the structures and reactivities of intervening aggregates underlying highly selective asymmetric alkylations of carboxylic acid dianions (enediolates) mediated by the dilithium salt of a C2-symmetric chiral tetraamine. Crystallography shows a trilithiated n-butyllithium-dilithiated amide that has dimerized to a hexalithiated form. Spectroscopic studies implicate the non-dimerized trilithiated mixed aggregate. Reaction of the dilithiated amide with the dilithium enediolate derived from phenylacetic acid affords a tetralithio aggregate comprised of the two dianions in solution and the dimerized octalithio form in the solid state. Computational studies shed light on the details of the solution structures and afford a highly predictive stereochemical model.

A hetero-alkali-metal version of the utility amide LDA: lithium-potassium diisopropylamide

Designed to extend the synthetically important alkali-metal diisopropylamide [N(i)Pr(2); DA] class of compounds, the first example of a hetero-alkali-metallic complex of DA has been prepared as a partial TMEDA solvate. Revealed by an X-ray crystallographic study, its structure exists as a discrete lithium-rich trinuclear Li(2)KN(3) heterocycle, with TMEDA only solvating the largest of the alkali-metals, with the two-coordinate lithium atoms being close to linearity [161.9(2)°]. A variety of NMR spectroscopic studies, including variable temperature and DOSY NMR experiments, suggests that this new form of LDA maintains its integrity in non-polar hydrocarbon solution. This complex thus represents a rare example of a KDA molecule which is soluble in non-polar medium without the need for excessive amounts of solubilizing Lewis donor being added.

Azaaldol condensation of a lithium enolate solvated by N,N,N',N'-tetramethylethylenediamine: dimer-based 1,2-addition to imines

The lithium enolate of tert-amylacetate solvated by N,N,N',N'-tetramethylethylenediamine (TMEDA) is shown to be a doubly chelated dimer. Adding the dimeric enolate to 4-fluorobenzaldehyde-N-phenylimine affords an N-lithiated β-amino ester shown to be monomeric using (6)Li and (15)N NMR spectroscopies. Rate studies using (19)F NMR spectroscopy reveal reaction orders consistent with a transition structure of stoichiometry [(ROLi)2(TMEDA)2(imine)](‡). Density functional theory computations explore several possible dimer-based transition structures with monodentate and bidentate coordination of TMEDA. Supporting rate studies using trans-N,N,N',N'-1,2-tetramethylcyclohexanediamine showing analogous rates and rate law suggest that TMEDA is fully chelated.

Lithium diisopropylamide-mediated ortholithiation of 2-fluoropyridines: rates, mechanisms, and the role of autocatalysis

Lithium diisopropylamide (LDA)-mediated ortholithiations of 2-fluoropyridine and 2,6-difluoropyridine in tetrahydrofuran at -78 °C were studied using a combination of IR and NMR spectroscopic and computational methods. Rate studies show that a substrate-assisted deaggregation of LDA dimer occurs parallel to an unprecedented tetramer-based pathway. Standard and competitive isotope effects confirm post-rate-limiting proton transfer. Autocatalysis stems from ArLi-catalyzed deaggregation of LDA proceeding via 2:2 LDA-ArLi mixed tetramers. A hypersensitivity of the ortholithiation rates to traces of LiCl derives from LiCl-catalyzed LDA dimer-monomer exchange and a subsequent monomer-based ortholithiation. Fleeting 2:2 LDA-LiCl mixed tetramers are suggested to be key intermediates. The mechanisms of both the uncatalyzed and catalyzed deaggregations are discussed. A general mechanistic paradigm is delineated to explain a number of seemingly disparate LDA-mediated reactions, all of which occur in tetrahydrofuran at -78 °C.