Room-temperature dissociation of 1,2-dibromodisilenes to bromosilylenes

Metal-silicon triple bonds: reactivity of the silylidyne complexes [Cp*(CO)2M[triple bond, length as m-dash]Si-Tbb] (M = Cr - W)

The different reactivity pattern of M[triple bond, length as m-dash]Si and M[triple bond, length as m-dash]C bonds (M = transition metal) is illustrated by a series of reactions of the silylidyne complexes [Cp*(CO)2M[triple bond, length as m-dash]Si-Tbb] (1-M) (M = Cr - W; Cp* = η 5-pentamethylcyclopentadienyl; Tbb = 4-tert-butyl-2,6-bis(bis(trimethylsilyl)methyl)phenyl)). Complexes 1-M were obtained selectively from Li[Cp*M(CO)3] and the 1,2-dibromodisilene (E)-Tbb(Br)Si[double bond, length as m-dash]Si(Br)Tbb. The reaction of 1-Mo and 1-W with two equivalents of mesityl isocyanate leads selectively to complex 2-Mo and 2-W, respectively, featuring a novel κ 2 O,O-imidocarbonatosilyl ligand. Ring opening of ethyloxirane occurs rapidly with 1-Mo and leads to the hydrido-enolatosilylidene complex 3-Mo illustrating the Si-centered electrophilicity of the silylidyne complex. Trimethylsilyldiazomethane induces a cleavage of the Mo[triple bond, length as m-dash]Si bond of 1-Mo after a rapid double [2 + 1] cycloaddition of the terminal N-atom, resulting in the first silaamidinato complex 4-Mo. In comparison, the reaction of 1-Mo with mesityl azide gives, after N2 elimination, the Mo-silaiminoacyl complex 5-Mo. All compounds were fully characterized and the isomerism and dynamics of 3-Mo in solution were analysed by a combination of spectroscopic and quantum-chemical studies.

Silicon Analogues of Cyclopropyl Radical Derived from a Highly Stable Cyclic Disilene Compound Featuring a Si-Br Bond

A halogen-substituted cyclic disilene compound, bromocyclotrisilene, Si3Br(Eind)3 (3a), bearing fused-ring bulky Eind (a: R1 = R2 = Et) groups, has been synthesized as an extraordinarily air-stable compound by the reduction of 1,2-dibromodisilene, (Eind)BrSi═SiBr(Eind) (2a), or tribromosilane, (Eind)SiBr3 (1a), with the Mg or Li metal. The X-ray diffraction analysis of 3a showed that the disilene moiety has an almost planar, but slightly trans-bent structure. Even though 3a is quite air-stable both in solutions and in the solid state, its Si-Br bond is reactive under reducing conditions. The further treatment of 3a with the Li metal leads to the formation of room-temperature thermally stable silicon homologues of the cyclopropyl radical, i.e., the cyclotrisilanyl radicals (6a) [6a(syn) and 6a(anti)], via intramolecular C-H bond activation in a transient silicon homologue of the cyclopropenyl radical, i.e., the cyclotrisilenyl radical, [Si3(Eind)3]• (5a). The formation mechanism of 6a from 5a is discussed based on the theoretical calculations. The unique structural and electronic properties of these Si3 three-membered ring species incorporating the Eind groups have been experimentally and theoretically investigated.

Ferrocene-Based N-Heterocyclic Silylenes: Monomeric Silanechalcogenones, Silanimines, Silirenes, and Insertion Products with P4

The stable ferrocene-based N-heterocyclic silylenes fc[(N{B})2Si] (A; fc=1,1'-ferrocenylene, {B}=(HCNDipp)2B, Dipp=2,6-diisopropylphenyl) and fc[(NDipp)2Si] (B) are compared in a study focussing on their reactivity towards a range of small to moderately sized molecular substrates, viz. P4, S8, Se8, MesN3 (Mes=mesityl), RC≡CH, and RC≡CR (R=Ph, SiMe3). The Dipp-substituted congener B exhibits a more pronounced ambiphilicity and is sterically less congested than its 1,3,2-diazaborolyl-substituted relative A, in line with the higher reactivity of the former. The difference in reactivity is obviously due more to electronic than to steric reasons, as is illustrated by the fact that both A and B react with the comparatively bulky substrate MesN3 under mild conditions to afford the corresponding silanimine fc[(N{B})2Si=NMes] and fc[(NDipp)2Si=NMes], respectively. The heavier ketone analogues fc[(N{B})2Si=E] (E=S, Se, Te) are readily available from A and the corresponding chalcogen. In contrast, the reaction of the more reactive silylene B with elemental sulfur or selenium is unspecific, affording product mixtures. However, fc[(NDipp)2Si=Se] is selectively prepared from B and (Et2N)3PSe; the Te analogue is also accessible, but crystallises as head-to-tail dimer.

Stretched Central Double Bonds in Dialumene and Disilene by Amino Substituents: A Case of Lone Pair Repulsion

There have been remarkable advances in the syntheses and applications of groups 13 and 14 homonuclear ethene analogues. However, successes are largely limited to aryl- and/or silyl-substituted species. Analogues bearing two or more heteroatoms are still scarce. In this work, the block-localized wavefunction (BLW) method at the density functional theory (DFT) level was employed to study dialumene and disilene bearing two amino substituents whose optimal geometries exhibit significantly stretched central M=M (M=Al or Si) double bonds compared with aryl- and/or silyl-substituted species. Computational analyses showed that the repulsion between the lone electron pairs of amino substituents and M=M π bond plays a critical role in the elongation of the M=M bonds. Evidently, replacing the substituent groups -NH2 with -BH2 can enhance the planarity and shorten the central double bonds due to the absence of lone pair electrons in BH2 .

A series of (E)-1,2-diaryldigermenes incorporating bulky Eind groups: structural characteristics and absorption properties

A series of (E)-1,2-diaryldigermenes, (Eind)ArGeGeAr(Eind) [Ar = phenyl (2), thiophen-2-yl (3), 9,9-dimethyl-2-fluorenyl (4) and 2,2'-bithiophen-5-yl (5)], supported by the fused-ring bulky 1,1,3,3,5,5,7,7-octaethyl-s-hydrindacen-4-yl (Eind) groups, have been obtained as yellow-orange to red crystalline solids by the reaction of 1,2-dibromodigermene, (Eind)BrGeGeBr(Eind) (1), with ArLi. In the crystals of 2-5, the digermene cores show a flexible nature adopting a trans-bent geometry with the trans-bent angles (θ) between the Ge-Ge vector and the C_Eind-Ge-C_Ar plane of 34.04(12)° (2), 38.3(3)° and 38.8(3)° (3), 33.69(12)° (4) and 39.30(13)° (5). In the UV-vis spectra, strong π-π* absorptions have been observed with an absorption maximum at 451 nm (ε = 1.3 × 10⁴) (2), 455 nm (ε = 9.7 × 10³) (3), 480 nm (ε = 1.3 × 10⁴) (4) and 497 nm (ε = 1.4 × 10⁴) (5), retaining the GeGe double bond in solution. The absorption data and DFT calculations provide evidence for the intrinsic π-conjugation between the GeGe chromophore and aromatic rings involving the narrowing of the HOMO-LUMO gaps (ΔE) with the extension of the carbon π-electron systems.

Halogen-Exchange Reactions of Iminophosphonamido-Chlorosilylenes with Alkali Halides: Convenient Synthesis of Heavier Halosilylenes

Halogen-substituted silylenes are an important building block for synthesizing silicon-based low-valent and multiple-bond species. However, the number of reports on heavier halosilylenes that contain bromine and iodine is still limited. Here, we present a convenient synthesis for bromo- and iodosilylenes supported by an iminophosphonamide ligand. The heavier halosilylenes [Ph₂P(^tBuN)₂]SiX (2: X = Br, 3: X = I) were successfully synthesized via the halogen-exchange reaction of chlorosilylene 1 with alkali halides in THF. As a demonstration of the reactivity of 2 and 3, oxidative addition reactions of 2 and 3 with elemental selenium in C₆D₆ afforded the corresponding bromo- (5) or iodosilylene-selone (6) as colorless crystals. The molecular structures of 2, 3, 5, and 6 were fully characterized by spectroscopic means and single-crystal X-ray diffraction analysis. Furthermore, the effects of the halogen atom on the electronic state of halosilylenes 1-3 and halosilylene-selones 4-6 were investigated using density functional theory (DFT) calculations.

Tetracyclic silaheterocycle formed through a pericyclic reaction cascade including a two-fold intramolecular C–C bond activation

Reductive debromination of the tribromoamidosilane 2 gave the tetracyclic silaheterocycle 3 through a unique reaction cascade involving unprecedented two-fold intramolecular cycloaddition by transient silylenes. Experimental and computational analyses of the reaction mechanism allowed the identification of the key intermediates that lead to the silaheterocycle 3 or, alternatively, to the cyclotrisilene 19.

Reductive debromination of the tribromoamidosilane 2 gave the tetracyclic silaheterocycle 3 through a unique reaction cascade involving unprecedented two-fold intramolecular cycloaddition by transient silylenes.

Imino(silyl)disilenes: application in versatile bond activation, reversible oxidation and thermal isomerization

Two novel disilenes of type ABSi[double bond, length as m-dash]SiAB bearing N-heterocyclic imino (A = NItBu) and trialkylsilyl (B = SitBu31, B = SitBu2Me 2) groups are reported. The reduced steric demand in 2 results in a highly stable, nonetheless flexible system, wherefore (E/Z) isomerization is observed from room temperature up to 90 °C. The proposed isomerization mechanism proceeds via monomeric silylenes in line with experimental results. Despite enhanced stability, disilene 2 retains high reactivity in the activation of small molecules, including H2. The rare example of a disilene radical cation 7 is isolated and shows reversible redox behavior. White phosphorous (P4) selectively reacts with 2 to give the unique cage-compound 8. Selective thermal rearrangement of 2 at higher temperatures yields the A2Si[double bond, length as m-dash]SiB2-type disilene 9 (A = NItBu, B = SitBu2Me), which bears characteristics of a zwitterionic and a dative central Si-Si bond. The proposed mechanism proceeds via an initial NHI migration followed by silyl migration.

Interconversion between a silaimine and an aminosilylene supported by an iminophosphonamide ligand

The reaction of a chlorosilylene, supported by an iminophosphonamide ligand, with KN(SiMe₃)₂ resulted in the formation of a silaimine instead of the expected aminosilylene. However, this silaimine exists in equilibrium with the corresponding aminosilylene, which was experimentally demonstrated using variable-temperature NMR spectroscopy and a trapping reaction with elemental selenium to give a silaselenourea.

Generation of Bis(ferrocenyl)silylenes from Siliranes

Divalent silicon species, the so-called silylenes, represent attractive organosilicon building blocks. Isolable stable silylenes remain scarce, and in most hitherto reported examples, the silicon center is stabilized by electron-donating substituents (e.g., heteroatoms such as nitrogen), which results in electronic perturbation. In order to avoid such electronic perturbation, we have been interested in the chemistry of reactive silylenes with carbon-based substituents such as ferrocenyl groups. Due to the presence of a divalent silicon center and the redox-active transition metal iron, ferrocenylsilylenes can be expected to exhibit interesting redox behavior. Herein, we report the design and synthesis of a bis(ferrocenyl)silirane as a precursor for a bis(ferrocenyl)silylene, which could potentially be used as a building block for redox-active organosilicon compounds. It was found that the isolated bis(ferrocenyl)siliranes could be a bottleable precursor for the bis(ferrocenyl)silylene under mild conditions.

Small Molecule Activation by Two-Coordinate Acyclic Silylenes

In recent decades, the chemistry of stable silylenes (R2Si:) has evolved significantly. The first major development in this chemistry was the isolation of a silicocene which is stabilized by the Cp* (Cp* = η5-C5Me5) ligand in 1986 and subsequently the isolation of a first N-heterocyclic silylene (NHSi:) in 1994. Since the groundbreaking discoveries, a large number of isolable cyclic silylenes and higher coordinated silylenes, i.e. Si(II) compounds with coordination number greater than two, have been prepared and the properties investigated. However, the first isolable two-coordinate acyclic silylene was finally reported in 2012. The achievements in the synthesis of acyclic silylenes have allowed for the utilization of silylenes in small molecule activation including inert H2 activation, a process previously exclusive to transition metals. This minireview highlights the developments in silylene chemistry, specifically two-coordinate acyclic silylenes, including experimental and computational studies which investigate the extremely high reactivity of the acyclic silylenes.

Phosphine-Stabilized Diiododiborenes: Isolable Diborenes with Six Labile Bonds

The lability of B=B, B-P, and B-halide bonds is combined in the syntheses of the first diiododiborenes. In a series of reactivity tests, these diiododiborenes undergo cleavage of all six of their central bonds in different ways, leading to products of B=B hydrogenation and dihalogenation as well as halide exchange.

Precise Activation of Ammonia and Carbon Dioxide by an Iminodisilene

The activation of NH₃ and CO₂ is still an ambitious target for multiply bonded sub-valent silicon compounds. Now, the precise splitting of the N-H bond of ammonia by (Z)-imino(silyl)disilene 1 to give trans-1,2-adduct 2 a at low temperatures (-78 °C) is presented. According to DFT calculations, the stereospecific hydroamination follows a similar mechanism as the recently reported anti-addition of H₂ to the Si=Si bond of 1. The aminosilane 2 b could also be obtained as the formal silylene addition product under thermodynamic reaction control. By applying low temperatures, the activation of CO₂ with 1 selectively afforded the cis-oxadisilacyclobutanone 7-c as [2+2] cycloadduct. By performing the reaction directly at ambient temperatures, a mixture of three different-sized silacycles (4-6) was observed. Their formation was investigated theoretically and their structures were revealed with separate experiments using 1 and the oxygenation agents N₂ O and O₂ .

Functional Disilenes in Synthesis

Functionalized disilenes are valuable auxiliary tools in preparative chemistry. In the following review the various synthetic potential of disilenes as precursors is presented. Upon consumption of the Si=Si unit in disilenes, cyclic, polycyclic and cluster-like arrangements are obtainable.

π-Electron systems containing Si=Si double bonds

Sterically large substituents can provide kinetic stabilization to various types of low-coordinate compounds. For example, regarding the chemistry of the group 14 elements, since West et al. introduced the concept of kinetic protection of the otherwise highly reactive Si=Si double bond by bulky mesityl (2,4,6-trimethylphenyl) groups in 1981, a number of unsaturated compounds of silicon and its group homologs have been successfully isolated by steric effects using the appropriate large substituents. However, the functions and applications of the Si-Si π-bonds consisting of the 3pπ electrons on the formally sp2-hybridized silicon atoms have rarely been explored until 10 years ago, when Scheschkewitz and Tamao independently reported the model systems of the oligo(p-phenylenedisilenylene)s (Si-OPVs) in 2007. This review focuses on the recent advances in the chemistry of π-electron systems containing Si=Si double bonds, mainly published in the last decade. The synthesis, characterization, and potential application of a variety of donor-free π-conjugated disilene compounds are described.

From zinco(ii) arsaketenes to silylene-stabilised zinco arsinidene complexes

The steric congestion of a N-heterocyclic silylene promotes the formation of a monomeric As-metallated silylene-arsinidene compound with somewhat double bond character through replacement of CO in the LZn–AsCO precursor (L = β-diketiminate).

1,2-Dihalodigermenes bearing bulky Eind groups: synthesis, characterization, and conversion to halogermylenoids

We present the transformation of low-coordinate germanium(ii) compounds.

Cleavage of a P=P Double Bond Mediated by N-Heterocyclic Carbenes

The reaction of the bulky diphosphenes (Rind)P=P(Rind) (1; Rind=1,1,3,3,5,5,7,7-octa-R-substituted s-hydrindacen-4-yl) with two molecules of N-heterocyclic carbene (NHC; 1,3,4,5-tetramethylimidazol-2-ylidene) resulted in the quantitative formation of the NHC-bound phosphinidenes NHC→P(Rind) (2), along with the cleavage of the P=P double bond. The reaction times are dependent on the steric size of the Rind groups (11 days for 2 a (R=Et) and 2 h for 2 b (R=Et, Me) at room temperature). The mechanism for the double bond-breaking is proposed to proceed via the formation of the NHC-coordinated, highly polarized diphospehenes 3 as an intermediate. Approach of a second NHC to 3 induces P-P bond cleavage and P-C bond formation, which proceeds through a transition state with a large negative Gibbs energy change to afford the two molecules of 2, thus being the rate-determining step of the overall reaction with the activation barriers of 80.4 for 2 a and 29.1 kJ mol^-1 for 2 b.

A Fully Phosphane-Substituted Disilene

There is growing interest in compounds containing functionalized E=E multiple bonds (E=Si, Ge, Sn, Pb) because of their potential to exhibit novel physical and chemical properties. However, compounds containing multiple functionalizations are rare, with scarcity increasing with increasing degree of substitution. The first ditetrelene R₂E=ER₂ in which the E=E bond is substituted by four heteroatoms (other than Si) is described. The tetraphosphadisilene {(Mes)₂P}₂Si=Si{P(Mes)₂}₂ (7) is readily isolated from the reaction between SiBr₄ and [(Mes)₂P]Li, the latter of which acts as a sacrificial reducing agent. The structure of 7 is presented, while the bonding in, and stability of 7 were probed using DFT calculations.

Synthesis and Structural Characterization of Lithium and Titanium Complexes Bearing a Bulky Aryloxide Ligand Based on a Rigid Fused-Ring s-Hydrindacene Skeleton

The bulky aryl alcohols, (Rind)OH (1) [Rind = EMind (a) and Eind (b)], based on the rigid fused-ring 1,1,3,3,5,5,7,7-octa-R-substituted s-hydrindacene skeleton were prepared by the reaction of (Rind)Li with nitrobenzene followed by protonation. The treatment of 1 with (n)BuLi affords the lithium aryloxide dimers [(Rind)OLi(THF)]2 (2) or trimers [(Rind)OLi]3 (3), depending on the employed solvents (THF = tetrahydrofuran). The salt metathesis reaction of [(EMind)OLi(THF)]2 (2a) with TiCl4(THF)2 leads to the formation of the mononuclear diamagnetic mono- and bis(aryloxide) Ti(IV) complexes, [(EMind)O]TiCl3(THF) (4a) and [(EMind)O]2TiCl2 (5a). We also isolated a trace amount of the tris(aryloxide) Ti(IV) complex, [(EMind)O]3TiCl (6a). The reaction between 2a and TiCl3(THF)3 resulted in the isolation of the mononuclear paramagnetic mono- and bis(aryloxide) Ti(III) complexes, [(EMind)O]TiCl2(THF)2 (7a) and [(EMind)O]2TiCl(THF)2 (8a). The discrete monomeric structures of the titanium complexes 4a, 5a, 6a, 7a, and 8a were determined by X-ray crystallography.

Reactivity in the periphery of functionalised multiple bonds of heavier group 14 elements

Heavier group 14 multiple bonds have intrigued chemists since more than a century. The synthesis of stable compounds with double and triple bonds with silicon, germanium, tin and lead had considerable impact on modern ideas of chemical bonding. These developments were made possible by the use of bulky substituents that provide kinetic and thermodynamic protection. Since about a decade the compatibility of heavier multiple bonds with various functional groups has moved into focus. This review covers multiply bonded group 14 species with at least one additional reactive site. The vinylic functionalities of groups 1 and 17, resulting in nucleophilic and electrophilic disila vinyl groups, respectively, are the most prevalent and well-studied. They have been employed repeatedly for the transfer of heavier multiple bonds to yield low-valent group 14 compounds with novel structural motifs. Vinylic functionalities of groups 2 to 16 and a few σ-bonded transition metal complexes are experimentally known, but their reactivity has been studied to a lesser extent. Donor-coordinated multiple bonds are a relatively new field of research, but the large degree of unsaturation as isomers of alkynes (as well as residual functionality in some cases) offers considerable possibility for further manipulation, e.g. for the incorporation into more extended systems. Heavier allyl halides constitute the major part of heavier multiple bonds with a functional group in allylic position and some examples of successful transformations are given. At present, remote functionalities are basically limited to para-phenylene functionalised disilenes. The reported use of the latter for further derivatisation might encourage investigations in this direction. In summary, the study of peripherally functionalised multiple bonds with heavier group 14 elements is already well beyond its infancy and may be an instrumental factor in awakening the potential of group 14 chemistry for applications in polymers and other materials.