Water-Soluble Cationic Conjugated Polymers: Response to Electron-Rich Bioanalytes

Water-soluble conjugated polymers for bioelectronic systems

Bioelectronics is an interdisciplinary field of research that aims to establish a synergy between electronics and biology. Contributing to a deeper understanding of bioelectronic processes and the built bioelectronic systems, a variety of new phenomena, mechanisms and concepts have been derived in the field of biology, medicine, energy, artificial intelligence science, etc. Organic semiconductors can promote the applications of bioelectronics in improving original performance and creating new features for organisms due to their excellent photoelectric and electrical properties. Recently, water-soluble conjugated polymers (WSCPs) have been employed as a class of ideal interface materials to regulate bioelectronic processes between biological systems and electronic systems, relying on their satisfying ionic conductivity, water-solubility, good biocompatibility and the additional mechanical and electrical properties. In this review, we summarize the prominent contributions of WSCPs in the aspect of the regulation of bioelectronic processes and highlight the latest advances in WSCPs for bioelectronic applications, involving biosynthetic systems, photosynthetic systems, biophotovoltaic systems, and bioelectronic devices. The challenges and outlooks of WSCPs in designing high-performance bioelectronic systems are also discussed.

Precise Stepwise Synthesis of Donor-Acceptor Conjugated Polymer Brushes Grafted from Surfaces

Donor-acceptor (D-A) conjugated polymers are promising materials in optoelectronic applications, especially those forming ordered thin films. The processability of such conjugated macromolecules is typically enhanced by introducing bulky side chains, but it may affect their ordering and/or photophysical properties of the films. We show here the synthesis of surface-grafted D-A polymer brushes using alternating attachment of tailored monomers serving as electron donors (D) and acceptors (A) via coupling reactions. In such a stepwise procedure, alternating copolymer brushes consisting of thiophene and benzothiadiazole-based moieties with precisely tailored thickness and no bulky substituents were formed. The utilization of Sonogashira coupling was shown to produce densely packed molecular wires of tailored thickness, while Stille coupling and Huisgen cycloaddition were less efficient, likely because of the higher flexibility of D-A bridging groups. The D-A brushes exhibit reduced bandgaps, semiconducting properties and can form aggregates, which can be adjusted by changing the grafting density of the chains.

N-oxygenation of amino compounds: Early stages in its application to the biocatalyzed preparation of bioactive compounds

Among the compounds that contain unusual functional groups, nitro is perhaps one of the most interesting due to the valuable properties it confers on pharmaceuticals and explosives. Traditional chemistry has for many years used environmentally unfriendly strategies; in contrast, the biocatalyzed production of this type of products offers a promising alternative. The small family of enzymes formed by N-oxygenases allows the conversion of an amino group to a nitro through the sequential addition of oxygen. These enzymes also make it possible to obtain other less oxidized N-O functions, such as hydroxylamine or nitroso, present in intermediate or final products. The current substrates on which these enzymes are reported to work encompass a few aromatic molecules and sugars. The unique characteristics of N-oxygenases and the great economic value of the products that they could generate, place them in a position of very high scientific and industrial interest. The most important and best studied N-oxygenases will be presented here.

Synthesis and photophysical properties of water-soluble fluorinated poly(aryleneethynylene)s

Reported are the synthesis of water-soluble fluorinated conjugated polymers, and photophysical properties, and fluorescence quenching response to arylamines.

Recent Advances in Phthalan and Coumaran Chemistry

Oxygen-containing heterocycles are common in biologically active compounds. In particular, phthalan and coumaran cores are found in pharmaceuticals, organic electronics, and other useful medical and technological applications. Recent research has expanded the methods available for their synthesis. This Minireview presents recent advances in the chemistry of phthalans and coumarans, with the goal of overcoming synthetic challenges and facilitating the applications of phthalans and coumarans.

Highly Sensitive and Discriminative Detection of BTEX in the Vapor Phase: A Film-Based Fluorescent Approach

BTEX (benzene, toluene, ethylbenzene, o-xylene, m-xylene, and p-xylene) represents a group of volatile organic compounds (VOCs) and constitutes a great threat to human health. However, sensitive, selective, and speedy detection of them on-site and in the vapor phase remains a challenge for years. Herein, we report a film-based fluorescent approach and a conceptual sensor, which shows unprecedented sensitivity, speed, and reversibility to the aromatic hydrocarbons in the vapor phase. In the studies, pentiptycene was employed to produce a nonplanar perylene bisimide (PBI) derivative, P-PBI. The compound was further utilized to fabricate the film. The novelty of the design is the combination of capillary condensation and solvent effect, which is expected to enrich the analytes from vapor phase and shows outputs at the same time. Importantly, the film permits instant response (∼3 s) and real-time identification (<1 min) of benzene and toluene from other aromatic hydrocarbons. The experimental detection limits (DLs) of the six analytes are lower than 9.2, 2.7, 1.9, 0.2, 0.4, and 0.4 ppm, which with the exception of benzene, are significantly lower than the NIOSH recommended long-term exposure limits. More importantly, the film is photochemically stable, and more than 300 repetitive tests showed no observable bleaching. In addition, the sensing is fully reversible. The superior performance of the film device is in support of the assumption that the combination of capillary condensation and solvation effect would constitute an effective way to design high-performance fluorescent films, especially for challenging chemical inert and photoelectronically inactive VOCs.

Competition-derived FRET-switching cationic conjugated polymer-Ir(III) complex probe for thrombin detection

A novel, label-free and convenient strategy for thrombin assay has been developed based on the fluorescence resonance energy transfer (FRET) from a cationic conjugated polymer (CCP) to Ir(III) complex. The energy donor (CCP) and acceptor (Ir(III) complex) were taken into close proximity through π-π stacking interaction and electrostatic interaction, leading to the occurrence of FRET. However, the introduction of the thrombin aptamer upset the status and blocked the FRET process, but afterwards the reappearance of FRET phenomenon was confirmed by the special binding interaction between aptamer and thrombin, thus achieving the quantitative detection of thrombin. This assay could detect thrombin as low concentration as about 0.05pM and provided a highly specific selectivity among other nonspecific proteins. Moreover, the strategy may allow our platform to provide similar sensitivity toward different targets in an aptamer-structure-independent manner. Furthermore, the assay can be used to detect thrombin in diluted real urine or serum samples with a satisfactory recovery, implying its great potential for rapid detection of thrombin in the clinic.

Enhanced Photothermal Bactericidal Activity of the Reduced Graphene Oxide Modified by Cationic Water-Soluble Conjugated Polymer

Surface modification of graphene is extremely important for applications. Here, we report a grafting-through method for grafting water-soluble polythiophenes onto reduced graphene oxide (RGO) sheets. As a result of tailoring of the side chains of the polythiophenes, the modified RGO sheets, that is, RGO-g-P3TOPA and RGO-g-P3TOPS, are positively and negatively charged, respectively. The grafted water-soluble polythiophenes provide the modified RGO sheets with good dispersibility in water and high photothermal conversion efficiencies (ca. 88%). Notably, the positively charged RGO-g-P3TOPA exhibits unprecedentedly excellent photothermal bactericidal activity, because the electrostatic attractions between RGO-g-P3TOPA and Escherichia coli (E. coli) bind them together, facilitating direct heat conduction through their interfaces: the minimum concentration of RGO-g-P3TOPA that kills 100% of E. coli is 2.5 μg mL^-1, which is only 1/16th of that required for RGO-g-P3TOPS to exhibit a similar bactericidal activity. The direct heat conduction mechanism is supported by zeta-potential measurements and photothermal heating tests, in which the achieved temperature of the RGO-g-P3TOPA suspension (2.5 μg mL^-1, 32 °C) that kills 100% of E. coli is found to be much lower than the thermoablation threshold of bacteria. Therefore, this research demonstrates a novel and superior method that combines photothermal heating effect and electrostatic attractions to efficiently kill bacteria.

Dibenzothiophene-S,S-dioxide and Bispyridinium-Based Cationic Polyfluorene Derivative as an Efficient Cathode Modifier for Polymer Solar Cells

A novel n-type conjugated polymer containing dibenzothiophene-S,S-dioxide (FSO), bispyridinium, and fluorene scaffolds in the backbone (PFSOPyCl) was synthesized and used in the cathode interfacial layers (CILs) of conventional polymer solar cells (PSCs). The high electron affinities and large planar structures of the FSO and bispyridinium units endowed this polymer with good energy level alignments with [6,6]-phenyl-C₇₁ butyric acid methyl ester (PC₇₁BM) and metal cathode, and excellent electron transport and extraction properties. Polymer solar cells (PSCs) based on the poly[N-9″-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT):PC₇₁BM system with PFSOPyCl CIL exhibited simultaneous enhancement in open-circuit voltage (V_oc), short-circuit current density (J_sc), and fill factor (FF), while the power conversion efficiency increased from 5.47% to 6.79%, relative to the bare Al device. Besides, PSC based on the poly[4,8-bis(2-ethylhexyloxyl)benzo[1,2-b:4,5-b']dithio-phene-2,6-diyl-alt-ethylhexyl-3-fluorothithieno [3,4-b]thiophene-2-carboxylate-4,6-diyl] (PTB7):PC₇₁BM system achieved a PCE of 8.43% when using PFSOPyCl as CIL. Hence, PFSOPyCl is a promising candidate CIL for PSCs.

Effect of conjugation length and metal-backbone interactions on charge transport properties of conducting metallopolymers

Detailed studies on the effect of organic conjugation length, metal centers, and metal-backbone redox interactions on the charge transport properties of conducting metallopolymers (CMPs) are reported.

Synthesis and optical and electrochemical properties of water-soluble cationic fluorophores based on bispyridinium and dibenzothiophene-S,S-dioxide

Two water-soluble cationic fluorophores (FSOPyCl and FSOmiCl) based on bispyridinium and dibenzothiophene-S,S-dioxide show deep blue emission, and exhibit high photoluminescence quantum yields of 69% and 50% in water, respectively.

Preparation of exciplex-based fluorescent organic nanoparticles and their application in cell imaging

Novel organic fluorescent nanoparticles based on exciplex were prepared and have been successfully applied in live cell imaging.

Linquats: Synthesis, Characterization, and Properties of Linear Extended Diquats

We report an innovative synthetic route to linear extended diquats (linquats). Our approach is short and efficient and features a highly modular reaction sequence based on two-fold quaternization followed by the key intramolecular [2+2+2] alkyne cycloaddition. The physico-chemical properties of four new linquats were characterized by spectroscopic methods, X-ray crystallography, and electrochemistry complemented by information obtained from DFT calculations. Electron deficient N-heteroaromatic cations with linear extended diquat motif with high electron affinities have been recently recognized as attractive n-type semiconductors for chemical and biological sensing. Their advantageous redox properties such as very fast reversible electron transfers make the title compounds interesting for applications.

Simultaneous Identification of Neutral and Anionic Species in Complex Mixtures without Separation

A chemosensory system is reported that operates without the need for separation techniques and is capable of identifying anions and structurally similar bioactive molecules. In this strategy, the coordination of analytes to a metal complex with an open binding cleft generates "static structures" on the NMR timescale. Unique signals are created by strategically placing fluorine atoms in close proximity to bound analytes so that small structural differences induce distinct (19)F NMR shifts that can be used to identify each analyte. The utility of this method is illustrated by quantifying caffeine levels in coffee, by identifying ingredients in tea and energy drinks, and by discriminating between multiple biogenic amines with remote structural differences six carbon atoms away from the binding site. We further demonstrate the simultaneous identification of multiple neutral and anionic species in a complex mixture.

A fishing rod-like conjugated polymer bearing pillar[5]arenes

A novel diethynyl functionalized pillar[5]arene, that is a pentabenzenacyclodecaphane derivative, has been synthesized and polymerized with p-dihalobenzene to form a fishing rod-like conjugated polymer, where one of the benzenes in the pillar[5]arene rings is incorporated into a poly(arylene ethynylene) backbone.

Cucurbit[7]uril-threaded fluorene–thiophene-based conjugated polyrotaxanes

The optical and thermal properties of fluorene–thiophene based conjugated polyelectrolytes are altered by threading with CB7.

Controlling molecular ordering in solution-state conjugated polymers

Rationally encoding molecular interactions that can control the assembly structure and functional expression in a solution of conjugated polymers hold great potential for enabling optimal organic optoelectronic and sensory materials. In this work, we show that thermally-controlled and surfactant-guided assembly of water-soluble conjugated polymers in aqueous solution is a simple and effective strategy to generate optoelectronic materials with the desired molecular ordering. We have studied a conjugated polymer consisting of a hydrophobic thiophene backbone and hydrophilic, thermo-responsive ethylene oxide side groups, which shows a step-wise, multi-dimensional assembly in water. By incorporating the polymer into phase-segregated domains of an amphiphilic surfactant in solution, we demonstrate that both chain conformation and degree of molecular ordering of the conjugated polymer can be tuned in hexagonal, micellar and lamellar phases of the surfactant solution. The controlled molecular ordering in conjugated polymer assembly is demonstrated as a key factor determining the electronic interaction and optical function.

Pd- and Ni-catalyzed cross-coupling reactions in the synthesis of organic electronic materials

Organic molecules and polymers with extended π-conjugation are appealing as advanced electronic materials, and have already found practical applications in thin-film transistors, light emitting diodes, and chemical sensors. Transition metal (TM)-catalyzed cross-coupling methodologies have evolved over the past four decades into one of the most powerful and versatile methods for C-C bond formation, enabling the construction of a diverse and sophisticated range of π-conjugated oligomers and polymers. In this review, we focus our discussion on recent synthetic developments of several important classes of π-conjugated systems using TM-catalyzed cross-coupling reactions, with a perspective on their utility for organic electronic materials.

A novel pentiptycene bis(crown ether)-based [2](2)rotaxane whose two DB24C8 rings act as flapping wings of a butterfly

A novel [2](2)rotaxane based on pentiptycene-derived bis(crown ether) can be efficiently synthesized via a "click chemistry" method and the subsequent N-methylation. Due to the different affinities of DB24C8 with the ammonium and triazolium stations, the wing-flapping movement of the DB24C8 "wings" in the [2](2)rotaxane can be easily achieved by acid/base stimulus.