Crystal Structure of 6α-(Hydroxymethyl)penicillanate Complexed to the TEM-1 β-Lactamase from Escherichia coli: Evidence on the Mechanism of Action of a Novel Inhibitor Designed by a Computer-Aided Process

EzMechanism: an automated tool to propose catalytic mechanisms of enzyme reactions

Over the years, hundreds of enzyme reaction mechanisms have been studied using experimental and simulation methods. This rich literature on biological catalysis is now ripe for use as the foundation of new knowledge-based approaches to investigate enzyme mechanisms. Here, we present a tool able to automatically infer mechanistic paths for a given three-dimensional active site and enzyme reaction, based on a set of catalytic rules compiled from the Mechanism and Catalytic Site Atlas, a database of enzyme mechanisms. EzMechanism (pronounced as 'Easy' Mechanism) is available to everyone through a web user interface. When studying a mechanism, EzMechanism facilitates and improves the generation of hypotheses, by making sure that relevant information is considered, as derived from the literature on both related and unrelated enzymes. We validated EzMechanism on a set of 62 enzymes and have identified paths for further improvement, including the need for additional and more generic catalytic rules.

QM/MM Simulations Reveal the Determinants of Carbapenemase Activity in Class A β-Lactamases

β-lactam antibiotic resistance in Gram-negative bacteria, primarily caused by β-lactamase enzymes that hydrolyze the β-lactam ring, has become a serious clinical problem. Carbapenems were formerly considered "last resort" antibiotics because they escaped breakdown by most β-lactamases, due to slow deacylation of the acyl-enzyme intermediate. However, an increasing number of Gram-negative bacteria now produce β-lactamases with carbapenemase activity: these efficiently hydrolyze the carbapenem β-lactam ring, severely limiting the treatment of some bacterial infections. Here, we use quantum mechanics/molecular mechanics (QM/MM) simulations of the deacylation reactions of acyl-enzyme complexes of eight β-lactamases of class A (the most widely distributed β-lactamase group) with the carbapenem meropenem to investigate differences between those inhibited by carbapenems (TEM-1, SHV-1, BlaC, and CTX-M-16) and those that hydrolyze them (SFC-1, KPC-2, NMC-A, and SME-1). QM/MM molecular dynamics simulations confirm the two enzyme groups to differ in the preferred acyl-enzyme orientation: carbapenem-inhibited enzymes favor hydrogen bonding of the carbapenem hydroxyethyl group to deacylating water (DW). QM/MM simulations of deacylation give activation free energies in good agreement with experimental hydrolysis rates, correctly distinguishing carbapenemases. For the carbapenem-inhibited enzymes, free energies for deacylation are significantly higher than for the carbapenemases, even when the hydroxyethyl group was restrained to prevent interaction with the DW. Analysis of these simulations, and additional simulations of mutant enzymes, shows how factors including the hydroxyethyl orientation, the active site volume, and architecture (conformations of Asn170 and Asn132; organization of the oxyanion hole; and the Cys69-Cys238 disulfide bond) collectively determine catalytic efficiency toward carbapenems.

Crystal structures of the elusive Rhizobium etli L-asparaginase reveal a peculiar active site

Rhizobium etli, a nitrogen-fixing bacterial symbiont of legume plants, encodes an essential L-asparaginase (ReAV) with no sequence homology to known enzymes with this activity. High-resolution crystal structures of ReAV show indeed a structurally distinct, dimeric enzyme, with some resemblance to glutaminases and β-lactamases. However, ReAV has no glutaminase or lactamase activity, and at pH 9 its allosteric asparaginase activity is relatively high, with Km for L-Asn at 4.2 mM and kcat of 438 s-1. The active site of ReAV, deduced from structural comparisons and confirmed by mutagenesis experiments, contains a highly specific Zn2+ binding site without a catalytic role. The extensive active site includes residues with unusual chemical properties. There are two Ser-Lys tandems, all connected through a network of H-bonds to the Zn center, and three tightly bound water molecules near Ser48, which clearly indicate the catalytic nucleophile.

Exploring Additional Dimensions of Complexity in Inhibitor Design for Serine β-Lactamases: Mechanistic and Intra- and Inter-molecular Chemistry Approaches

As a bacterial resistance strategy, serine β-lactamases have evolved from cell wall synthesizing enzymes known as penicillin-binding proteins (PBP), by not only covalently binding β-lactam antibiotics but, also acquiring mechanisms of deacylating these antibiotics. This critical deacylation step leads to release of hydrolyzed and inactivated β-lactams, thereby providing resistance for the bacteria against these antibiotics targeting the cell wall. To combat β-lactamase-mediated antibiotic resistance, numerous β-lactamase inhibitors were developed that utilize various strategies to inactivate the β-lactamase. Most of these compounds are “mechanism-based” inhibitors that in some manner mimic the β-lactam substrate, having a carbonyl moiety and a negatively charged carboxyl or sulfate group. These compounds form a covalent adduct with the catalytic serine via an initial acylation step. To increase the life-time of the inhibitory covalent adduct intermediates, a remarkable array of different strategies was employed to improve inhibition potency. Such approaches include post-acylation intra- and intermolecular chemical rearrangements as well as affecting the deacylation water. These approaches transform the inhibitor design process from a 3-dimensional problem (i.e., XYZ coordinates) to one with additional dimensions of complexity as the reaction coordinate and time spent at each chemical state need to be taken into consideration. This review highlights the mechanistic intricacies of the design efforts of the β-lactamase inhibitors which so far have resulted in the development of “two generations” and 5 clinically available inhibitors.

Class D β-lactamases do exist in Gram-positive bacteria

Production of β-lactamases of the four molecular classes (A, B, C, and D) is the major mechanism of bacterial resistance to β-lactams, the largest class of antibiotics that have saved countless lives since their inception 70 years ago. Although several hundred efficient class D enzymes have been identified in Gram-negative pathogens over the last four decades, they have not been reported in Gram-positive bacteria. Here we demonstrate that efficient class D β-lactamases capable of hydrolyzing a wide array of β-lactam substrates are widely disseminated in various species of environmental Gram-positive organisms. Class D enzymes of Gram-positive bacteria have a distinct structural architecture and employ a unique substrate binding mode quite different from that of all currently known class A, C, and D β-lactamases. They constitute a novel reservoir of antibiotic resistance enzymes.

Active-Site Plasticity Is Essential to Carbapenem Hydrolysis by OXA-58 Class D β-Lactamase of Acinetobacter baumannii

Carbapenem-hydrolyzing class D β-lactamases (CHDLs) are a subgroup of class D β-lactamases, which are enzymes that hydrolyze β-lactams. They have attracted interest due to the emergence of multidrug-resistant Acinetobacter baumannii, which is not responsive to treatment with carbapenems, the usual antibiotics of choice for this bacterium. Unlike other class D β-lactamases, these enzymes efficiently hydrolyze carbapenem antibiotics. To explore the structural requirements for the catalysis of carbapenems by these enzymes, we determined the crystal structure of the OXA-58 CHDL of A. baumannii following acylation of its active-site serine by a 6α-hydroxymethyl penicillin derivative that is a structural mimetic for a carbapenem. In addition, several point mutation variants of the active site of OXA-58, as identified by the crystal structure analysis, were characterized kinetically. These combined studies confirm the mechanistic relevance of a hydrophobic bridge formed over the active site. This structural feature is suggested to stabilize the hydrolysis-productive acyl-enzyme species formed from the carbapenem substrates of this enzyme. Furthermore, our structural studies provide strong evidence that the hydroxyethyl group of carbapenems samples different orientations in the active sites of CHDLs, and the optimum orientation for catalysis depends on the topology of the active site allowing proper closure of the active site. We propose that CHDLs use the plasticity of the active site to drive the mechanism of carbapenem hydrolysis toward efficiency.

Detecting a quasi-stable imine species on the reaction pathway of SHV-1 β-lactamase and 6β-(hydroxymethyl)penicillanic acid sulfone

For the class A β-lactamase SHV-1, the kinetic and mechanistic properties of the clinically used inhibitor sulbactam are compared with the sulbactam analog substituted in its 6β position by a CH2OH group (6β-(hydroxymethyl)penicillanic acid). The 6β substitution improves both in vitro and microbiological inhibitory properties of sulbactam. Base hydrolysis of both compounds was studied by Raman and NMR spectroscopies and showed that lactam ring opening is followed by fragmentation of the dioxothiazolidine ring leading to formation of the iminium ion within 3 min. The iminium ion slowly loses a proton and converts to cis-enamine (which is a β-aminoacrylate) in 1 h for sulbactam and in 4 h for 6β-(hydroxymethyl) sulbactam. Rapid mix-rapid freeze Raman spectroscopy was used to follow the reactions between the two sulfones and SHV-1. Within 23 ms, a 10-fold excess of sulbactam was entirely hydrolyzed to give a cis-enamine product. In contrast, the 6β-(hydroxymethyl) sulbactam formed longer-lived acyl-enzyme intermediates that are a mixture of imine and enamines. Single crystal Raman studies, soaking in and washing out unreacted substrates, revealed stable populations of imine and trans-enamine acyl enzymes. The corresponding X-ray crystallographic data are consonant with the Raman data and also reveal the role played by the 6β-hydroxymethyl group in retarding hydrolysis of the acyl enzymes. The 6β-hydroxymethyl group sterically hinders approach of the water molecule as well as restraining the side chain of E166 that facilitates hydrolysis.

Serine and Cysteine π-Interactions in Nature: A Comparison of the Frequency, Structure, and Stability of Contacts Involving Oxygen and Sulfur

Despite many DNA–protein π-interactions in high-resolution crystal structures, only four X–H···π or X···π interactions were found between serine (Ser) or cysteine (Cys) and DNA nucleobase π-systems in over 100 DNA–protein complexes (where X = O for Ser and X = S for Cys). Nevertheless, 126 non-covalent contacts occur between Ser or Cys and the aromatic amino acids in many binding arrangements within proteins. Furthermore, Ser and Cys protein–protein π-interactions occur with similar frequencies and strengths. Most importantly, due to the great stability that can be provided to biological macromolecules (up to –20 kJ mol–1 for neutral π-systems or –40 kJ mol–1 for cationic π-systems), Ser and Cys π-interactions should be considered when analyzing protein stability and function.

Molecular dynamics and molecular docking studies on E166A point mutant, R274N/R276N double mutant, and E166A/R274N/R276N triple mutant forms of class A β-lactamases

Bacterial resistance to β-lactams antibiotics is a serious threat to human health. The most common cause of resistance to the β-lactams is the production of β-lactamase that inactivates β-lactams. Specifically, class A extended-spectrum β-lactamase produced by antibiotic resistant bacteria is capable of hydrolyzing extended-spectrum Cephalosporins and Monobactams. Mutations in class A β-lactamases play a crucial role in substrate and inhibitor specificity. In this present study, the E166A point mutant, R274N/R276N double mutant, and E166A/R274N/R276N triple mutant class A β-lactamases are analyzed. Molecular dynamics (MD) simulations are done to understand the consequences of mutations in class A β-lactamases. Root mean square deviation, root mean square fluctuation, radius of gyration, solvent accessibility surface area, hydrogen bond, and essential dynamics analysis results indicate notable loss in stability for mutant class A β-lactamases. MD simulations of native and mutant structures clearly confirm that the substitution of alanine at the position of 166, Asparagine at 274 and 276 causes more flexibility in 3D space. Molecular docking results indicate the mutation in class A β-lactamases which decrease the binding affinity of Cefpirome and Ceftobiprole which are third and fifth generation Cephalosporins, respectively. MD simulation of Ceftobiprole-native and mutant type Class A β-lactamases complexes reveal that E166A/R274N/R276N mutations alter the structure and notable loss in the stability for Ceftobirole-mutant type Class A β-lactamases complexes. Ceftobiprole is currently prescribed for patients with serious bacterial infections; this phenomenon is the probable cause for the effectiveness of Ceftobiprole in controlling bacterial infections.

Mechanism of Orlistat Hydrolysis by the Thioesterase of Human Fatty Acid Synthase

Fatty acid synthase (FASN), the sole protein capable of de novo synthesis of free fatty acids, is overexpressed in a wide variety of human cancers and is associated with poor prognosis and aggressiveness of these cancers. Orlistat, an FDA-approved drug for obesity treatment that inhibits pancreatic lipases in the GI tract, also inhibits the thioesterase (TE) of human FASN. The cocrystal structure of TE with orlistat shows a pseudo TE dimer containing two different forms of orlistat in the active site, an intermediate that is covalently bound to a serine residue (Ser²³⁰⁸) and a hydrolyzed and inactivated product. In this study, we attempted to understand the mechanism of TE-catalyzed orlistat hydrolysis by examining the role of the hexyl tail of the covalently bound orlistat in water activation for hydrolysis using molecular dynamics simulations. We found that the hexyl tail of the covalently bound orlistat undergoes a conformational transition, which is accompanied by destabilization of a hydrogen bond between a hydroxyl moiety of orlistat and the catalytic His²⁴⁸¹ of TE that in turn leads to an increased hydrogen bonding between water molecules and His²⁴⁸¹ and increased chance for water activation to hydrolyze the covalent bond between orlistat and Ser²³⁰⁸. Thus, the conformation of the hexyl tail of orlistat plays an important role in orlistat hydrolysis. Strategies that stabilize the hexyl tail may lead to the design of more potent irreversible inhibitors that target FASN and block TE activity with greater endurance.

A substrate-induced biotin binding pocket in the carboxyltransferase domain of pyruvate carboxylase

Biotin-dependent enzymes catalyze carboxyl transfer reactions by efficiently coordinating multiple reactions between spatially distinct active sites. Pyruvate carboxylase (PC), a multifunctional biotin-dependent enzyme, catalyzes the bicarbonate- and MgATP-dependent carboxylation of pyruvate to oxaloacetate, an important anaplerotic reaction in mammalian tissues. To complete the overall reaction, the tethered biotin prosthetic group must first gain access to the biotin carboxylase domain and become carboxylated and then translocate to the carboxyltransferase domain, where the carboxyl group is transferred from biotin to pyruvate. Here, we report structural and kinetic evidence for the formation of a substrate-induced biotin binding pocket in the carboxyltransferase domain of PC from Rhizobium etli. Structures of the carboxyltransferase domain reveal that R. etli PC occupies a symmetrical conformation in the absence of the biotin carboxylase domain and that the carboxyltransferase domain active site is conformationally rearranged upon pyruvate binding. This conformational change is stabilized by the interaction of the conserved residues Asp(590) and Tyr(628) and results in the formation of the biotin binding pocket. Site-directed mutations at these residues reduce the rate of biotin-dependent reactions but have no effect on the rate of biotin-independent oxaloacetate decarboxylation. Given the conservation with carboxyltransferase domains in oxaloacetate decarboxylase and transcarboxylase, the structure-based mechanism described for PC may be applicable to the larger family of biotin-dependent enzymes.

Inactivation of a class A and a class C β-lactamase by 6β-(hydroxymethyl)penicillanic acid sulfone

β-Lactamase inhibitors (clavulanic acid, sulbactam, and tazobactam) contribute significantly to the longevity of the β-lactam antibiotics used to treat serious infections. In the quest to design more potent compounds and to understand the mechanism of action of known inhibitors, 6β-(hydroxymethyl)penicillanic acid sulfone (6β-HM-sulfone) was tested against isolates expressing the class A TEM-1 β-lactamase and a clinically important variant of the AmpC cephalosporinase of Pseudomonas aeruginosa, PDC-3. The addition of the 6β-HM-sulfone inhibitor to ampicillin was highly effective. 6β-HM-sulfone inhibited TEM-1 with an IC(50) of 12 ± 2 nM and PDC-3 with an IC(50) of 180 ± 36 nM, and displayed lower partition ratios than commercial inhibitors, with partition ratios (k(cat)/k(inact)) equal to 174 for TEM-1 and 4 for PDC-3. Measured for 20 h, 6β-HM-sulfone demonstrated rapid, first-order inactivation kinetics with the extent of inactivation being related to the concentration of inhibitor for both TEM-1 and PDC-3. Using mass spectrometry to gain insight into the intermediates of inactivation of this inhibitor, 6β-HM-sulfone was found to form a major adduct of +247 ± 5 Da with TEM-1 and +245 ± 5 Da with PDC-3, suggesting that the covalently bound, hydrolytically stabilized acyl-enzyme has lost a molecule of water (HOH). Minor adducts of +88 ± 5 Da with TEM-1 and +85 ± 5 Da with PDC-3 revealed that fragmentation of the covalent adduct can result but appeared to occur slowly with both enzymes. 6β-HM-sulfone is an effective and versatile β-lactamase inhibitor of representative class A and C enzymes.

Hydrolytic mechanism of OXA-58 enzyme, a carbapenem-hydrolyzing class D β-lactamase from Acinetobacter baumannii

Carbapenem-hydrolyzing class D β-lactamases (CHDLs) represent an emerging antibiotic resistance mechanism encountered among the most opportunistic Gram-negative bacterial pathogens. We report here the substrate kinetics and mechanistic characterization of a prominent CHDL, the OXA-58 enzyme, from Acinetobacter baumannii. OXA-58 uses a carbamylated lysine to activate the nucleophilic serine used for β-lactam hydrolysis. The deacylating water molecule approaches the acyl-enzyme species, anchored at this serine (Ser-83), from the α-face. Our data show that OXA-58 retains the catalytic machinery found in class D β-lactamases, of which OXA-10 is representative. Comparison of the homology model of OXA-58 and the recently solved crystal structures of OXA-24 and OXA-48 with the OXA-10 crystal structure suggests that these CHDLs have evolved the ability to hydrolyze imipenem, an important carbapenem in clinical use, by subtle structural changes in the active site. These changes may contribute to tighter binding of imipenem to the active site and removal of steric hindrances from the path of the deacylating water molecule.

Resistance to the third-generation cephalosporin ceftazidime by a deacylation-deficient mutant of the TEM β-lactamase by the uncommon covalent-trapping mechanism

The Glu166Arg/Met182Thr mutant of Escherichia coli TEM(pTZ19-3) β-lactamase produces a 128-fold increase in the level of resistance to the antibiotic ceftazidime in comparison to that of the parental wild-type enzyme. The single Glu166Arg mutation resulted in a dramatic decrease in both the level of enzyme expression in bacteria and the resistance to penicillins, with a concomitant 4-fold increase in the resistance to ceftazidime, a third-generation cephalosporin. Introduction of the second amino acid substitution, Met182Thr, restored enzyme expression to a level comparable to that of the wild-type enzyme and resulted in an additional 32-fold increase in the minimal inhibitory concentration of ceftazidime to 64 μg/mL. The double mutant formed a stable covalent complex with ceftazidime that remained intact for the entire duration of the monitoring, which exceeded a time period of 40 bacterial generations. Compared to those of the wild-type enzyme, the affinity of the TEM(pTZ19-3) Glu166Arg/Met182Thr mutant for ceftazidime increased by at least 110-fold and the acylation rate constant was augmented by at least 16-fold. The collective experimental data and computer modeling indicate that the deacylation-deficient Glu166Arg/Met182Thr mutant of TEM(pTZ19-3) produces resistance to the third-generation cephalosporin ceftazidime by an uncommon covalent-trapping mechanism. This is the first documentation of such a mechanism by a class A β-lactamase in a manifestation of resistance.

Modifications of the C6-substituent of penicillin sulfones with the goal of improving inhibitor recognition and efficacy

In order to evaluate the importance of a hydrogen-bond donating substituent in the design of β-lactamase inhibitors, a series of C6-substituted penicillin sulfones, lacking a C2' substituent, and having an sp(3) hybridized C6, was prepared and evaluated against a representative classes A and C β-lactamases. It was found that a C6 hydrogen-bond donor is necessary for good inhibitory activity, but that this feature alone is not sufficient in this series of C6β-substituted penicillin sulfones. Other factors which may impact the potency of the inhibitor include the steric bulk of the C6 substituent (e.g., methicillin sulfone) which may hinder recognition in the class A β-lactamases, and also high similarity to the natural substrates (e.g., penicillin G sulfone) which may render the prospective inhibitor a good substrate of both classes of enzyme. The best inhibitors had non-directional hydrogen-bonding substituents, such as hydroxymethyl, which may allow sufficient conformational flexibility of the acyl-enzyme for abstraction of the C6 proton by E166 (class A), thus promoting isomerization to the β-aminoacrylate as a stabilized acyl-enzyme.

Three decades of beta-lactamase inhibitors

Since the introduction of penicillin, beta-lactam antibiotics have been the antimicrobial agents of choice. Unfortunately, the efficacy of these life-saving antibiotics is significantly threatened by bacterial beta-lactamases. beta-Lactamases are now responsible for resistance to penicillins, extended-spectrum cephalosporins, monobactams, and carbapenems. In order to overcome beta-lactamase-mediated resistance, beta-lactamase inhibitors (clavulanate, sulbactam, and tazobactam) were introduced into clinical practice. These inhibitors greatly enhance the efficacy of their partner beta-lactams (amoxicillin, ampicillin, piperacillin, and ticarcillin) in the treatment of serious Enterobacteriaceae and penicillin-resistant staphylococcal infections. However, selective pressure from excess antibiotic use accelerated the emergence of resistance to beta-lactam-beta-lactamase inhibitor combinations. Furthermore, the prevalence of clinically relevant beta-lactamases from other classes that are resistant to inhibition is rapidly increasing. There is an urgent need for effective inhibitors that can restore the activity of beta-lactams. Here, we review the catalytic mechanisms of each beta-lactamase class. We then discuss approaches for circumventing beta-lactamase-mediated resistance, including properties and characteristics of mechanism-based inactivators. We next highlight the mechanisms of action and salient clinical and microbiological features of beta-lactamase inhibitors. We also emphasize their therapeutic applications. We close by focusing on novel compounds and the chemical features of these agents that may contribute to a "second generation" of inhibitors. The goal for the next 3 decades will be to design inhibitors that will be effective for more than a single class of beta-lactamases.

Inhibition of class A and C beta-lactamases by diaroyl phosphates

A series of diaroyl phosphates was employed to assess the general reactivity of this class of molecule against classical class A and class C beta-lactamases. The compounds were found, in general, to be inhibitory substrates of both classes of enzyme. In each case, they reacted rapidly with the enzyme (10(4) to 10(6) s(-1) M(-1)) to yield transiently stable intermediates, most likely acyl-enzymes, which slowly (10(-3) to 10(-1) s(-1)) regenerated free enzyme. In certain cases, side branches from direct turnover produced EII complexes ("substrate" inhibition), more inert EI' complexes, and, in one case, a completely inactive EI' complex. Deacylation, but not acylation, was enhanced by electron-withdrawing substituents. Acylation rates were enhanced by hydrophobic substitution, both in the diaroyl phosphate and at the enzyme active site. The latter factor led to the general order of beta-lactamase acylation rates: class D (previous results) > class C > class A. It is likely that nanomolar inhibitors of all serine beta-lactamases could be achieved by rational exploitation of diacyl phosphates.

Regiospecific syntheses of 6alpha-(1R-Hydroxyoctyl)penicillanic acid and 6beta-(1R-hydroxyoctyl)penicillanic acid as mechanistic probes of class D beta-lactamases

The unique hydrophobic surface patches in class D beta-lactamases presented an opportunity for designing two compounds, 6alpha-(1R-hydroxyoctyl)penicillanic acid and 6beta-(1R-hydroxyoctyl)penicillanic acid, as mechanistic probes of these enzymes. In a sequence of three synthetic steps from benzhydryl 6,6-dibromopenicillanate, the targeted compounds were prepared in a stereospecific manner.

Structural analysis of spiro beta-lactone proteasome inhibitors

Spiro beta-lactone-based proteasome inhibitors were discovered in the context of an asymmetric catalytic total synthesis of the natural product (+)-lactacystin (1). Lactone 4 was found to be a potent inhibitor of the 26S proteasome, while its C-6 epimer (5) displayed weak activity. Crystallographic studies of the two analogues covalently bound to the 20S proteasome permitted characterization of the important stabilizing interactions between each inhibitor and the proteasome's key catalytic N-terminal threonine residue. This structural data support the hypothesis that the discrepancy in potency between 4 and 5 may be due to differences in the hydrolytic stabilities of the resulting acyl enzyme complexes.

Rational design of a beta-lactamase inhibitor achieved via stabilization of the trans-enamine intermediate: 1.28 A crystal structure of wt SHV-1 complex with a penam sulfone

beta-Lactamases are one of the major causes of antibiotic resistance in Gram negative bacteria. The continuing evolution of beta-lactamases that are capable of hydrolyzing our most potent beta-lactams presents a vexing clinical problem, in particular since a number of them are resistant to inhibitors. The efficient inhibition of these enzymes is therefore of great clinical importance. Building upon our previous structural studies that examined tazobactam trapped as a trans-enamine intermediate in a deacylation deficient SHV variant, we designed a novel penam sulfone derivative that forms a more stable trans-enamine intermediate. We report here the 1.28 A resolution crystal structure of wt SHV-1 in complex with a rationally designed penam sulfone, SA2-13. The compound is covalently bound to the active site of wt SHV-1 similar to tazobactam yet forms an additional salt-bridge with K234 and hydrogen bonds with S130 and T235 to stabilize the trans-enamine intermediate. Kinetic measurements show that SA2-13, once reacted with SHV-1 beta-lactamase, is about 10-fold slower at being released from the enzyme compared to tazobactam. Stabilizing the trans-enamine intermediate represents a novel strategy for the rational design of mechanism-based class A beta-lactamase inhibitors.

4-Substituted trinems as broad spectrum beta-lactamase inhibitors: structure-based design, synthesis, and biological activity

A wide variety of pathogens have acquired antimicrobial resistance as an inevitable evolutionary response to the extensive use of antibacterial agents. In particular, one of the most widely used antibiotic structural classes is the beta-lactams, in which the most common and the most efficient mechanism of bacterial resistance is the synthesis of beta-lactamases. Class C beta-lactamase enzymes are primarily cephalosporinases, mostly chromosomally encoded, and are inducible by exposure to some beta-lactam agents and resistant to inhibition by marketed beta-lactamase inhibitors. In an ongoing effort to alleviate this problem a series of novel 4-substituted trinems was designed and synthesized. Significant in vitro inhibitory activity was measured against the bacterial beta-lactamases of class C and additionally against class A. The lead compound LK-157 was shown to be a potent mechanism-based inactivator. Acylation of the active site Ser 64 of the class C enzyme beta-lactamase was observed in the solved crystal structures of two inhibitors complexes to AmpC enzyme from E. cloacae. Structure-activity relationships in the series reveal the importance of the trinem scaffold for inhibitory activity and the interesting potential of the series for further development.

Substrate deacylation mechanisms of serine-beta-lactamases

The substrate deacylation mechanisms of serine-beta-lactamases (classes A, C and D) were investigated by theoretical calculations. The deacylation of class A proceeds via four elementary reactions. The rate-determining process is the tetrahedral intermediate (TI) formation and the activation energy is 24.6 kcal/mol at the DFT level. The deacylation does not proceed only by Glu166, which acts as a general base, but Lys73 also participates in the reaction. The C3-carboxyl group of the substrate reduces the barrier height at the TI formation (substrate-assisted catalysis). In the case of class C, the deacylation consists of two elementary processes. The activation energy of the TI formation has been estimated to be 30.5 kcal/mol. Tyr150Oeta is stabilized in the deprotonated state in the acyl-enzyme complex and works as a general base. This situation can exist due to the interaction with two positively charged side chains of lysine (Lys67 and Lys315). The deacylation of class D also consists of two elementary reaction processes. The activation energy of the TI formation is ca. 30 kcal/mol. It is thought that the side chain of Lys70 is deprotonated and acts as a general base. When Lys70 is carbamylated, the activation energy is reduced to less than 20 kcal/mol. This suggests that the high hydrolysis activity of class D with carbamylated Lys70 is due to the reduction of activation energy for deacylation. From these results, it is concluded that the contribution of the lysine residue adjacent to the serine residue is indispensable for the enzymatic reactions by serine-beta-lactamases.

Backbone Dynamics of TEM-1 Determined by NMR: Evidence for a Highly Ordered Protein†

Backbone dynamics of TEM-1 beta-lactamase (263 amino acids, 28.9 kDa) were studied by 15N nuclear magnetic resonance relaxation at 11.7, 14.1, and 18.8 T. The high quality of the spectra allowed us to measure the longitudinal relaxation rate (R1), the transverse relaxation rate (R2), and the {1H}-15N NOE for up to 227 of the 250 potentially observable backbone amide groups. The model-free formalism was used to determine internal motional parameters using an axially anisotropic model. TEM-1 exhibits a small prolate axial anisotropy (D(parallel)/D(perpendicular) = 1.23 +/- 0.01) and a global correlation time (tau(m)) of 12.41 +/- 0.01 ns. The unusually high average generalized order parameter (S2) of 0.90 +/- 0.02 indicates that TEM-1 is one of the most ordered proteins studied by liquid-state NMR to date. Although the omega-loop has a high degree of order in the picosecond-to-nanosecond time scale (mean S2 value of 0.90 +/- 0.02), we observed the presence of microsecond-to-millisecond time scale motions for this loop, as for the vicinity of the active site. These motions could be relevant for the catalytic function of TEM-1. Amide exchange experiments were also performed, and several amide groups were not exchanged after 12 days, an indication that global motions in TEM-1 are also very limited. Although detailed dynamics characterization by NMR cannot be readily applied to TEM-1 in the presence of relevant substrates, the unusual picosecond-to-nanosecond dynamics behavior of TEM-1 presented here will be essential to the validation and improvement of future molecular dynamics simulations of TEM-1 in the presence of functionally relevant substrates.

Inverse acyl phosph(on)ates: substrates or inhibitors of beta-lactam-recognizing enzymes?

Acyl phosph(on)ates represent a new class of inhibitors of beta-lactam-recognizing enzymes. Previously described members of this class were aroyl phosph(on)ates. These compounds have been shown to acylate and/or phosphylate the active site serine residue, leading to either transient or essentially irreversible inhibition [Li, N., and Pratt, R. F. (1998) J. Am. Chem. Soc.120, 4264-4268]. The present paper describes the synthesis and evaluation as inhibitors of an inverse pair of acyl phosph(on)ates that incorporate the amido side chain that represents a major substrate specificity determinant of these enzymes. Thus, N-(phenylacetyl)glycyl phenyl phosphate and benzoyl N-(benzyloxycarbonyl)aminomethyl phosphonate were prepared. The former of these compounds was found to be a substrate of typical class A and C beta-lactamases and of the DD-peptidase of Streptomyces R61; it thus acylates the active site serine. In contrast, the latter compound was an irreversible inhibitor of the above enzymes, probably by phosphonylation of the active site serine. With each of these enzymes therefore, the amido side chain rather than the acyl group dictates the orientation of the bound phosph(on)ate and thus the mode of reaction.

Understanding the longevity of the beta-lactam antibiotics and of antibiotic/beta-lactamase inhibitor combinations

Microbial resistance necessitates the search for new targets and new antibiotics. However, it is likely that resistance problems will eventually threaten these new products and it may, therefore, be instructive to review the successful employment of beta-lactam antibiotic/beta-lactamase inhibitor combinations to combat penicillin resistance. These combination drugs have proven successful for more than two decades, with inhibitor resistance still being relatively rare. The beta-lactamase inhibitors are mechanism-based irreversible inactivators. The ability of the inhibitors to avoid resistance may be due to the structural similarities between the substrate and inhibitor.

Modeling study of the influences of the aromatic transitions and the local environment on the far-UV rotational strengths in TEM-1 β-lactamase

Rotational strengths in the far-UV of TEM-1 beta-lactamase have been investigated with two theoretical models based on the matrix method. The first model excludes, and a second includes, effects of the local electrostatic interactions on the chromophore energies. Special attention is given to the contributions of the aromatic side-chain chromophores, and the mechanisms of generation of rotational strengths are analyzed. The sensitivity of the computational models with respect to the structural changes of the protein are discussed. [Figure: see text].

Structure, function, and inhibition along the reaction coordinate of CTX-M beta-lactamases

CTX-M enzymes are an emerging group of extended spectrum beta-lactamases (ESBLs) that hydrolyze not only the penicillins but also the first-, second-, and third-generation cephalosporins. Although they have become the most frequently observed ESBLs in certain areas, there are few effective inhibitors and relatively little is known about their detailed mechanism. Here we describe the X-ray crystal structures of CTX-M enzymes in complex with different transition-state analogues and beta-lactam inhibitors, representing the enzyme as it progresses from its acylation transition state to its acyl enzyme complex to the deacylation transition state. As the enzyme moves along this reaction coordinate, two key catalytic residues, Lys73 and Glu166, change conformations, tracking the state of the reaction. Unexpectedly, the acyl enzyme complex with the beta-lactam inhibitor cefoxitin still has the catalytic water bound; this water had been predicted to be displaced by the unusual 7alpha-methoxy of the inhibitor. Instead, the 7alpha-group appears to inhibit by preventing the formation of the deacylation transition state through steric hindrance. From an inhibitor design standpoint, we note that the best of the reversible inhibitors, a ceftazidime-like boronic acid compound, binds to CTX-M-16 with a K(i) value of 4 nM. When used together in cell culture, this inhibitor reversed cefotaxime resistance in CTX-M-producing bacteria. The structure of its complex with CTX-M enzyme and the structural view of the reaction coordinate described here provide templates for inhibitor design and intervention to combat this family of antibiotic resistance enzymes.

Molecular Modeling ofHenry-Michaelis and Acyl-Enzyme Complexes between Imipenem andEnterobacter cloacae P99β-Lactamase

We report a molecular-mechanics (AMBER*) study on the Henry-Michaelis complex and the corresponding acyl-enzyme adduct formed between imipenem (1), a transient inhibitor of beta-lactamases, and Enterobacter cloacae P99, a class C-beta-lactamase. We have examined the influence of the structural configuration of the functional groups in the substrate on their three-dimensional (3D) arrangement at the active site, which was compared with those adopted by typical penicillins and cephalosporins. Our results confirm that the carboxy group of the antibiotic plays a prominent role in the binding of the substrate to the active site, and that it activates Ser64 through interaction with the phenolic OH group of Tyr150. The binding of imipenem to E. cloacae P99 increases the distance between Tyr150 and Ser64 due to the presence of a hydrophobic Me group in the (R)-1-hydroxyethyl substituent at C(6). This, together with the 3D arrangement of its carboxy group, leads to an interaction with the active site in a manner that hinders H+ exchange between the nucleophile in Ser64 and its basic activator, the phenolic group of Tyr150.

Insights into the Base Catalysis Exerted by the DD-Transpeptidase from Streptomyces K15: A Molecular Dynamics Study

Herein, we present results from molecular dynamics simulations of the DD-transpeptidase/penicillin-binding protein from Streptomyces K15 and its Michaelis complex with benzylpenicillin. For the apo-enzyme, six different configurations of the active site were modeled in aqueous solution and their relative stabilities were estimated by means of quantum mechanical energy calculations. The energetically most stable configuration has a neutral Lys(213) residue. In this configuration, the nucleophilic Ser(35) hydroxyl group interchanges with a water molecule in the "oxy-anion hole" and the Lys(38)/Lys(213) ammonium/amino groups are connected through the Ser(96) hydroxyl group. Subsequently, the enzyme-penicillin complexes corresponding to the four most stable configurations of the apo-enzyme were modeled. In the presence of the beta-lactam antibiotic, the configuration with a neutral Lys(38) residue is favored energetically and shows the best orientation for nucleophilic attack. In addition, a very stable contact between the Ser(35) hydroxyl group and the neutral amino group of Lys(38) supports the assignation of Lys(38) as the base catalyst for the acylation step. Finally, some mechanistic implications of enzyme-inhibitor contacts involving the benzylpenicillin carboxylate group are also discussed.

A Molecular Switch Created by In Vitro Recombination of Nonhomologous Genes

We have created a molecular switch by the in vitro recombination of nonhomologous genes and subjecting the recombined genes to evolutionary pressure. The gene encoding TEM1 beta-lactamase was circularly permuted in a random fashion and subsequently randomly inserted into the gene encoding Escherichia coli maltose binding protein. From this library, a switch (RG13) was identified in which its beta-lactam hydrolysis activity was compromised in the absence of maltose but increased 25-fold in the presence of maltose. Upon removal of maltose, RG13's catalytic activity returned to its premaltose level, illustrating that the switching is reversible. The modularity of RG13 was demonstrated by increasing maltose affinity while preserving switching activity. RG13 gave rise to a novel cellular phenotype, illustrating the potential of molecular switches to rewire the cellular circuitry.

Site-saturation mutagenesis of Tyr-105 reveals its importance in substrate stabilization and discrimination in TEM-1 beta-lactamase

The conserved Class A beta-lactamase active site residue Tyr-105 was substituted by saturation mutagenesis in TEM-1 beta-lactamase from Escherichia coli in order to clarify its role in enzyme activity and in substrate stabilization and discrimination. Minimum inhibitory concentrations were calculated for E. coli cells harboring each Y105X mutant in the presence of various penicillin and cephalosporin antibiotics. We found that only aromatic residues as well as asparagine replacements conferred high in vivo survival rates for all substrates tested. At position 105, the small residues alanine and glycine provide weak substrate discrimination as evidenced by the difference in benzylpenicillin hydrolysis relative to cephalothin, two typical penicillin and cephalosporin antibiotics. Kinetic analyses of mutants of interest revealed that the Y105X replacements have a greater effect on K(m) than k(cat), highlighting the importance of Tyr-105 in substrate recognition. Finally, by performing a short molecular dynamics study on a restricted set of Y105X mutants of TEM-1, we found that the strong aromatic bias observed at position 105 in Class A beta-lactamases is primarily defined by a structural requirement, selecting planar residues that form a stabilizing wall to the active site. The adopted conformation of residue 105 prevents detrimental steric interactions with the substrate molecule in the active site cavity and provides a rationalization for the strong aromatic bias found in nature at this position among Class A beta-lactamases.

Strategy in Inhibition of Cathepsin B, A Target in Tumor Invasion and Metastasis

Cathepsin B, a cysteine protease, is an important target in fighting cancer. This enzyme has been implicated in enhancing tumor invasiveness and metastasis, therefore inhibitors for cathepsin B are highly sought as potential anticancer and antimetastatic agents. A structure-based design effort was pursued in arriving at a template for inhibition of cathepsin B. Focused compound libraries were synthesized based on this template, which were screened for cathepsin B inhibitory properties. Compound 2, 1-(2(R)-[1(S)-acetoxy-2-[2(S)-(2,4-difluoro-benzoylamino)-3-phenyl-propionylaminooxy]-2-oxo-ethyl]-pentanoyl)-pyrrolidine-2(S)-carboxylic acid benzyl ester, is the prototype of this novel class of cysteine protease inhibitor that emerged from the search. The molecule modifies the active site of cathepsin B covalently, irreversibly, and efficiently, a process for which the kinetic parameters were evaluated. A set of three judiciously altered variants of compound 2 was also synthesized to explore the details of the proposed mechanism of action by this inhibitor. Compound 2 and its analogues may prove useful tools in reversing the deleterious effect of cathepsin B in fighting cancer.

The importance of a critical protonation state and the fate of the catalytic steps in class A beta-lactamases and penicillin-binding proteins

Beta-lactamases and penicillin-binding proteins are bacterial enzymes involved in antibiotic resistance to beta-lactam antibiotics and biosynthetic assembly of cell wall, respectively. Members of these large families of enzymes all experience acylation by their respective substrates at an active site serine as the first step in their catalytic activities. A Ser-X-X-Lys sequence motif is seen in all these proteins, and crystal structures demonstrate that the side-chain functions of the serine and lysine are in contact with one another. Three independent methods were used in this report to address the question of the protonation state of this important lysine (Lys-73) in the TEM-1 beta-lactamase from Escherichia coli. These techniques included perturbation of the pK(a) of Lys-73 by the study of the gamma-thialysine-73 variant and the attendant kinetic analyses, investigation of the protonation state by titration of specifically labeled proteins by nuclear magnetic resonance, and by computational treatment using the thermodynamic integration method. All three methods indicated that the pK(a) of Lys-73 of this enzyme is attenuated to 8.0-8.5. It is argued herein that the unique ground-state ion pair of Glu-166 and Lys-73 of class A beta-lactamases has actually raised the pK(a) of the active site lysine to 8.0-8.5 from that of the parental penicillin-binding protein. Whereas we cannot rule out that Glu-166 might activate the active site water, which in turn promotes Ser-70 for the acylation event, such as proposed earlier, we would like to propose as a plausible alternative for the acylation step the possibility that the ion pair would reconfigure to the protonated Glu-166 and unprotonated Lys-73. As such, unprotonated Lys-73 could promote serine for acylation, a process that should be shared among all active-site serine beta-lactamases and penicillin-binding proteins.

Inhibition of class A and class C beta-lactamases by penems: crystallographic structures of a novel 1,4-thiazepine intermediate

A new beta-lactamase inhibitor, a methylidene penem having a 5,6-dihydro-8H-imidazo[2,1-c][1,4]oxazine heterocyclic substituent at the C6 position with a Z configuration, irreversibly inhibits both class A and class C serine beta-lactamases with IC(50) values of 0.4 and 9.0 nM for TEM-1 and SHV-1 (class A), respectively, and 4.8 nM in AmpC (class C) beta-lactamases. The compound also inhibits irreversibly the class C extended-spectrum GC1 beta-lactamase (IC(50) = 6.2 nM). High-resolution crystallographic structures of a reaction intermediate of (5R)-(6Z)-6-(5,6-dihydro-8H-imidazo[2,1-c][1,4]oxazin-2-ylmethylene)-7-oxo-4-thia-1-azabicyclo[3.2.0]hept-2-ene-3-carboxylic acid 1 with the SHV-1 beta-lactamase and with the GC1 beta-lactamase have been determined by X-ray diffraction to resolutions of 1.10 and 1.38 A, respectively. The two complexes were refined to crystallographic R-factors (R(free)) of 0.141 (0.186) and 0.138 (0.202), respectively. Cryoquenching of the reaction of 1 with each beta-lactamase crystal produced a common, covalently bound intermediate. After acylation of the serine, a nucleophilic attack by the departing thiolate on the C6' atom yielded a novel seven-membered 1,4-thiazepine ring having R stereochemistry at the new C7 moiety. The orientation of this ring in each complex differs by a 180 degrees rotation about the bond to the acylated serine. The acyl ester bond is stabilized to hydrolysis through resonance stabilization with the dihydrothiazepine ring and by low occupancy or disorder of hydrolytic water molecules. In the class A complex, the buried water molecule on the alpha-face of the ester bond appears to be loosely bound or absent. In the class C complex, a water molecule on the beta-face is disordered and poorly activated for hydrolysis. Here, the acyl intermediate is unable to assist its own hydrolysis, as is thought to occur with many class C substrates.

Penicillin-derived inhibitors that simultaneously target both metallo- and serine-β-lactamases

The synthesis and beta-lactamase inhibitory activity of four 6-(mercaptomethyl)penicillinates and the four corresponding 6-(hydroxymethyl)penicillinates are described. These penicillins include both C6 stereoisomers as well as the sulfide and sulfone oxidation states of the penam thiazolidine sulfur. All compounds were evaluated as inhibitors of representative metallo- and serine-beta-lactamases enzymes. Selected (mercaptomethyl)penicillinates are shown to inactivate both metallo- and serine-beta-lactamases and to display synergism with piperacillin against beta-lactamase producing strains.

A novel beta-lactamase activity from a penicillin-binding protein of Treponema pallidum and why syphilis is still treatable with penicillin

Treponema pallidum, the causative agent of syphilis, is sensitive to penicillins. Yet, an abundant membrane-bound protein of this organism, Tp47, turns over penicillins. It is shown herein that the turnover process is a hydrolytic reaction that results in the corresponding penicilloates, products that have their beta-lactam bonds hydrolyzed. This is the reaction of beta-lactamases, bona fide resistance enzymes to beta-lactam antibiotics. Remarkably, the x-ray structure of Tp47 bears no resemblance to any other beta-lactamases or the related penicillin-binding proteins. Furthermore, evidence is presented that the reaction of Tp47 takes place in the absence of the zinc ion and does not involve intermediary acyl enzyme species. Hence, the beta-lactamase activity of Tp47 is the fifth known mechanism for turnover of beta-lactam antibiotics. Tp47 also exhibits a penicillin binding reaction, in the process of which the enzyme is covalently modified in the active site. The two reactions take place in two different active sites, and the events of the beta-lactamase activity are over 2,000-fold more rapid than the penicillin binding reaction. The level of beta-lactamase activity is high and is held back only by a strong product-inhibition component to the catalytic process. If natural selection would result in a mutant variant of Tp47 that overcomes product inhibition for the beta-lactamase activity, a novel bona fide resistance to penicillins will emerge in Treponema, which will be a disconcerting clinical development. The physiological functions of Tp47 are not known, but it is likely that this is at least a bifunctional enzyme involved in the processing of the Treponema peptidoglycan as a substrate.

Conformational properties of penicillins: Quantum chemical calculations and molecular dynamics simulations of benzylpenicillin

Herein, we present theoretical results on the conformational properties of benzylpenicillin, which are characterized by means of quantum chemical calculations (MP2/6-31G* and B3LYP/6-31G*) and classical molecular dynamics simulations (5 ns) both in the gas phase and in aqueous solution. In the gas phase, the benzylpenicillin conformer in which the thiazolidine ring has the carboxylate group oriented axially is the most favored one. Both intramolecular CH. O and dispersion interactions contribute to stabilize the axial conformer with respect to the equatorial one. In aqueous solution, a molecular dynamics simulation predicts a relative population of the axial:equatorial conformers of 0.70:0.30 in consonance with NMR experimental data. Overall, the quantum chemical calculations as well as the simulations give insight into substituent effects, the conformational dynamics of benzylpenicillin, the frequency of ring-puckering motions, and the correlation of side chain and ring-puckering motions.

Understanding the acylation mechanisms of active-site serine penicillin-recognizing proteins: a molecular dynamics simulation study

Beta-lactam antibiotics inhibit enzymes involved in the last step of peptidoglycan synthesis. These enzymes, also identified as penicillin-binding proteins (PBPs), form a long-lived acyl-enzyme complex with beta-lactams. Antibiotic resistance is mainly due to the production of beta-lactamases, which are enzymes that hydrolyze the antibiotics and so prevent them reaching and inactivating their targets, and to mutations of the PBPs that decrease their affinity for the antibiotics. In this study, we present a theoretical study of several penicillin-recognizing proteins complexed with various beta-lactam antibiotics. Hybrid quantum mechanical/molecular mechanical potentials in conjunction with molecular dynamics simulations have been performed to understand the role of several residues, and pK(a) calculations have also been done to determine their protonation state. We analyze the differences between the beta-lactamase TEM-1, the membrane-bound PBP2x of Streptococcus pneumoniae, and the soluble DD-transpeptidase of Streptomyces K15.

A dynamic structure for the acyl-enzyme species of the antibiotic aztreonam with the Citrobacter freundii beta-lactamase revealed by infrared spectroscopy and molecular dynamics simulations

Infrared difference spectra show that at least 4 conformations coexist for the ester carbonyl group of the stable acyl-enzyme species formed between the antibiotic aztreonam and the class C beta-lactamase from Citrobacter freundii. A novel method for the assignment of the bands that arise from the ester carbonyl group has been employed. This has made use of the finding that the infrared absorption intensity of aliphatic esters is surprisingly constant, so a direct comparison with simple model esters has been possible. This has allowed a clear distinction to be made between ester and amide (protein) absorptions. The polarity of the conformer environment varies from hexane-like to strongly hydrogen-bonded. We assume that the conformer with the lowest frequency (1,690 cm(-)(1)) and hence the strongest hydrogen-bonding is the singular conformer observed in the X-ray crystallographic structure, since a good interaction via two hydrogen bonds with the oxyanion hole is seen. Molecular dynamics simulation by the method of locally enhanced sampling revealed that the motion of the ester carbonyl of the acyl-enzyme species in and out of the oxyanion hole is facile. The simulation revealed two pathways for this motion that would go through intermediates that first break one or the other of the two hydrogen bonds to the oxyanion hole, prior to departure of the carbonyl moiety out of the active site. It is likely that such motion for the acyl-enzyme species might also occur with more typical beta-lactam substrates for beta-lactamases, but their detection in the more rapid time scale may prove a challenge.

Insights into the acylation mechanism of class A beta-lactamases from molecular dynamics simulations of the TEM-1 enzyme complexed with benzylpenicillin

Herein, we present results from molecular dynamics MD simulations ( approximately 1 ns) of the TEM-1 beta-lactamase in aqueous solution. Both the free form of the enzyme and its complex with benzylpenicillin were studied. During the simulation of the free enzyme, the conformation of the Omega loop and the interresidue contacts defining the complex H-bond network in the active site were quite stable. Most interestingly, the water molecule connecting Glu166 and Ser70 does not exchange with bulk solvent, emphasizing its structural and catalytic relevance. In the presence of the substrate, Ser130, Ser235, and Arg244 directly interact with the beta-lactam carboxylate via H-bonds, whereas the Lys234 ammonium group has only an electrostatic influence. These interactions together with other specific contacts result in a very short distance ( approximately 3 A) between the attacking hydroxyl group of Ser70 and the beta-lactam ring carbonyl group, which is a favorable orientation for nucleophilic attack. Our simulations also gave insight into the possible pathways for proton abstraction from the Ser70 hydroxyl group. We propose that either the Glu166 carboxylate-Wat1 or the substrate carboxylate-Ser130 moieties could abstract a proton from the nucleophilic Ser70.

pKa, MM, and QM studies of mechanisms of beta-lactamases and penicillin-binding proteins: acylation step

The acylation step of the catalytic mechanism of beta-lactamases and penicillin-binding proteins (PBPs) has been studied with various approaches. The methods applied range from molecular dynamics (MD) simulations to multiple titration calculations using the Poisson-Boltzmann approach to quantum mechanical (QM) methods. The mechanism of class A beta-lactamases was investigated in the greatest detail. Most approaches support the critical role of Glu-166 and hydrolytic water in the acylation step of the enzymatic catalysis in class A beta-lactamases. The details of the catalytic mechanism have been revealed by the QM approach, which clearly pointed out the critical role of Glu-166 acting as a general base in the acylation step with preferred substrates. Lys-73 shuffles a proton abstracted by Glu-166 O(epsilon ) to the beta-lactam nitrogen through Ser-130 hydroxyl. This proton is transferred from O(gamma) of the catalytic Ser-70 through the bridging hydrolytic water to Glu-166 O(epsilon ). Then the hydrogen is simultaneously passed through S(N)2 inversion mechanism at Lys-73 N(zeta) to Ser-130 O(gamma), which loses its proton to the beta-lactam nitrogen. The protonation of beta-lactam nitrogen proceeds with an immediate ring opening and collapse of the first tetrahedral species into an acyl-enzyme intermediate. However, the studies that considered the effect of solvation lower the barrier for the pathway, which utilizes Lys-73 as a general base, thus creating a possibility of multiple mechanisms for the acylation step in the class A beta-lactamases. These findings help explain the exceptional efficiency of these enzymes. They emphasize an important role of Glu-166, Lys-73, and Ser-130 for enzymatic catalysis and shed light on details of the acylation step of class A beta-lactamase mechanism. The acylation step for class C beta-lactamases and six classes of PBPs were also considered with continuum solvent models and MD simulations.