Oxidation of Alkenes by Water with H2 Liberation

Cu(II)/Photoredox-Catalyzed Aminoacylation of Vinyl Bromides

A novel C-C coupling reaction of vinyl bromides with carboxamides has been developed through Cu(OAc)2/photocatalysis. This process features regioselective carboxamido carbon-vinylation under mild reaction conditions. Mechanistic studies suggest that the formation of an acyl-Cu(I) intermediate plays a crucial role with regard to enabling this transformation.

Photocatalytic Hydrogenation of Alkenes Using Water as Both the Reductant and the Proton Source

Utilization of clean and low-cost water as the reductant to enable hydrogenation of alkenes is highly attractive in green chemistry. However, this research subject is considerably challenging due to the sluggish kinetics of the water oxidation half-reaction. It is also very difficult to avoid the undesired oxidation of alkenes because that this oxidation is far easier to occur than the desired oxidation of water from thermodynamic standpoint. Herein, this challenge is overcome by applying a cooperative catalysis where HCl is used as the cocatalyst to accelerate Pt/g-C3N4-catalyzed water oxidation and suppress the undesired oxidation of the alkene. This provides an example for using water as the reductant and the proton source to enable the photocatalytic hydrogenation of alkenes. The present method exhibits broad substrate applicability, and allows various arylethenes and aliphatic alkenes to undergo the hydrogenation smoothly.

Metal-Ligand Cooperation with Thiols as Transient Cooperative Ligands: Acceleration and Inhibition Effects in (De)Hydrogenation Reactions

ConspectusOver the past two decades, we have developed a series of pincer-type transition metal complexes capable of activating strong covalent bonds through a mode of reactivity known as metal-ligand cooperation (MLC). In such systems, an incoming substrate molecule simultaneously interacts with both the metal center and ligand backbone, with one part of the molecule reacting at the metal center and another part at the ligand. The majority of these complexes feature pincer ligands with a pyridine core, and undergo MLC through reversible dearomatization/aromatization of this pyridine moiety. This MLC platform has enabled us to perform a variety of catalytic dehydrogenation, hydrogenation, and related reactions, with high efficiency and selectivity under relatively mild conditions.In a typical catalytic complex that operates through MLC, the cooperative ligand remains coordinated to the metal center throughout the entire catalytic process, and this complex is the only catalytic species involved in the reaction. As part of our ongoing efforts to develop new catalytic systems featuring MLC, we have recently introduced the concept of transient cooperative ligand (TCL), i.e., a ligand that is capable of MLC when coordinated to a metal center, but the coordination of which is reversible rather than permanent. We have thus far employed thiol(ate)s as TCLs, in conjunction with an acridanide-based ruthenium(II)-pincer catalyst, and this has resulted in remarkable acceleration and inhibition effects in various hydrogenation and dehydrogenation reactions. A cooperative thiol(ate) ligand can be installed in situ by the simple addition of an appropriate thiol in an amount equivalent to the catalyst, and this has been repeatedly shown to enable efficient bond activation by MLC without the need for other additives, such as base. The use of an ancillary thiol ligand that is not fixed to the pincer backbone allows the catalytic system to benefit from a high degree of tunability, easily implemented by varying the added thiol. Importantly, thiols are coordinatively labile enough under typical catalytic conditions to leave a meaningful portion of the catalyst in its original unsaturated form, thereby allowing it to carry out its own characteristic catalytic activity. This generates two coexisting catalyst populations─one that contains a thiol(ate) ligand and another that does not─and this may lead to different catalytic outcomes, namely, enhancement of the original catalytic activity, inhibition of this activity, or the occurrence of diverging reactivities within the same catalytic reaction mixture. These thiol effects have enabled us to achieve a series of unique transformations, such as thiol-accelerated base-free aqueous methanol reforming, controlled stereodivergent semihydrogenation of alkynes using thiol as a reversible catalyst inhibitor, and hydrogenative perdeuteration of C═C bonds without using D2, enabled by a combination of thiol-induced acceleration and inhibition. We have also successfully realized the unprecedented formation of thioesters through dehydrogenative coupling of alcohols and thiols, as well as the hydrogenation of organosulfur compounds, wherein the cooperative thiol serves as a reactant or product. In this Account, we present an overview of the TCL concept and its various applications using thiols.

Electrochemical hydrogenation and oxidation of organic species involving water

Fossil fuel-driven thermochemical hydrogenation and oxidation using high-pressure H2 and O2 are still popular but energy-intensive CO2-emitting processes. At present, developing renewable energy-powered electrochemical technologies, especially those using clean, safe and easy-to-handle reducing agents and oxidants for organic hydrogenation and oxidation reactions, is urgently needed. Water is an ideal carrier of hydrogen and oxygen. Electrochemistry provides a powerful route to drive water splitting under ambient conditions. Thus, electrochemical hydrogenation and oxidation transformations involving water as the hydrogen source and oxidant, respectively, have been developed to be mild and efficient tools to synthesize organic hydrogenated and oxidized products. In this Review, we highlight the advances in water-participating electrochemical hydrogenation and oxidation reactions of representative organic molecules. Typical electrode materials, performance metrics and key characterization techniques are firstly introduced. General electrocatalyst design principles and controlling the microenvironment for promoting hydrogenation and oxygenation reactions involving water are summarized. Furthermore, paired hydrogenation and oxidation reactions are briefly introduced before finally discussing the challenges and future opportunities of this research field.

Electrochemical aerobic Wacker-type oxygenation of triaryl substituted alkenes to 1,2,2-triarylethanones

An effective synthetic approach for various 1,2,2-triarylethanones from triaryl substituted alkenes has been developed via an electrochemical Wacker-type oxygenation with O2 as the sole oxygen source. It presents the first instance of the Wacker-type oxidation expanding its substrate scope to trisubstituted alkenes. The approach is transition-metal-free, compatible with various functional groups, and can be carried out under mild conditions resulting in satisfactory yields. Mechanistic experiments suggest the CO bond formation occurs through reactions between cationic carbon species and the superoxide radical, which involves the 1,2-shift of the electron-rich substituent.

Hydrated [3+2] Cyclotelomerization of Butafulvenes to Create Multiple Contiguous Fully Substituted Carbon Centers

The construction of multiple continuous fully substituted carbon centers, which serve as unique structural motif in natural products, is a challenging topic in organic synthesis. Herein, we report a hydrated [3+2] cyclotelomerization of butafulvenes to create contiguous fully substituted carbon backbone. In the presence of scandium triflate, all-carbon skeleton with spiro fused tricyclic ring can be constructed in high diastereoselectivity by utilizing butafulvene as the synthon. Mechanistic studies suggest that this atom-economic reaction probably proceeds through a synergistic process containing butafulvenes dimerization and nucleophilic attack by water. In addition, the tricyclic product can undergo a series of synthetic derivatizations, which highlights the potential applications of this strategy. The recyclability of Sc(OTf)3 has also been demonstrated to show its robust performance in this hydrated cyclotelomerization.

Sustainable amidation through acceptorless dehydrogenative coupling by pincer-type catalysts: recent advances

The amide functional group is ubiquitous in living organisms, and is of particular importance in bioactive compounds and pharmaceuticals. Because of the prevalence and significance of the amide bond, considerable efforts have been invested throughout the years in developing new synthetic methodologies for its formation. Nevertheless, amide synthesis still largely relies on variants of the traditional condensation of carboxylic acids and amines, mediated by stoichiometric coupling reagents. This poses a sustainability challenge, since such reactions suffer from unfavorable atom and step economies, involve harmful chemicals and produce chemical waste. Hence, establishing sustainable approaches to amide synthesis is of great importance. Over the last two decades, we have developed homogeneous catalytic reactions for sustainable synthetic transformations, primarily based on transition metal complexes of pincer ligands. A considerable portion of these efforts has been devoted to acceptorless dehydrogenative coupling, including that of alcohols and amines through ruthenium-catalyzed reactions. These latter processes generate amides without resorting to coupling reagents and typically produce no waste, with their only byproduct being H2 gas, which is itself a valuable resource. In the present review, we chronicle our progress in this area of research since 2014. This includes the use of water and ammonia as amidation reagents, expanding the scope of amidation substrates and target amides, achieving milder reaction conditions, development of amidation-based liquid organic hydrogen carrier systems, and introduction of manganese-based catalysts.

Selective oxidation of silanes into silanols with water using [MnBr(CO)5] as a precatalyst

The development of earth-abundant catalysts for the selective conversion of silanes to silanols with water as an oxidant generating valuable hydrogen as the only by-product continues to be a challenge. Here, we demonstrate that [MnBr(CO)₅] is a highly active precatalyst for this reaction, operating under neutral conditions and avoiding the undesired formation of siloxanes. As a result, a broad substrate scope, including primary and secondary silanes, could be converted to the desired products. The turnover performances of the catalyst were also examined, yielding a maximum TOF of 4088 h^-1. New light was shed on the debated mechanism of the interaction between [MnBr(CO)₅] and Si-H bonds based on the reaction kinetics (including KIEs of PhMe₂SiD and D₂O) and spectroscopic techniques (FT-IR, GC-TCD, ¹H-, ²⁹Si-, and ¹³C-NMR). The initial activation of [MnBr(CO)₅] was found to result from the formation of a manganese(i) hydride species and R₃SiBr, and the experimental data are most consistent with a catalytic cycle comprising a cationic tricarbonyl Mn(i) unit as the active framework.

Sustainable Wacker-Type Oxidations

The Wacker reaction is the oxidation of olefins to ketones and typically requires expensive and scarce palladium catalysts in the presence of an additional copper co-catalyst under harsh conditions (acidic media, high pressure of air/dioxygen, elevated temperatures). Such a transformation is relevant for industry, as shown by the synthesis of acetaldehyde from ethylene as well as for fine-chemicals, because of the versatility of a carbonyl group placed at specific positions. In this regard, many contributions have focused on controlling the chemo- and regioselectivity of the olefin oxidation by means of well-defined palladium catalysts under different sets of reaction conditions. However, the development of Wacker-type processes that avoid the use of palladium catalysts has just emerged in the last few years, thereby paving the way for the generation of more sustainable procedures, including milder reaction conditions and green chemistry technologies. In this Minireview, we discuss the development of new catalytic processes that utilize more benign catalysts and sustainable reaction conditions.

Oxidation of Organic Compounds Using Water as the Oxidant with H2 Liberation Catalyzed by Molecular Metal Complexes

Oxidation reactions of organic compounds play a central role in both industrial chemical and material synthesis as well as in fine chemical and pharmaceutical synthesis. While traditional laboratory-scale oxidative syntheses have relied on the use of strong oxidizers, modern large-scale oxidation processes preferentially utilize air or pure O₂ as an oxidant, with other oxidants such as hydrogen peroxide, nitric acid, and aqueous chlorine solution also being used in some processes. The use of molecular oxygen or air as an oxidant has been very attractive in recent decades because of the abundance of air and the lack of wasteful byproduct generation. Nevertheless, the use of high-pressure air or, in particular, pure oxygen can lead to serious safety concerns with improper handling and also necessitates the use of sophisticated high-pressure reactors for the processes.Several research groups, including ours, have investigated in recent times the possibility of carrying out catalytic oxidation reactions using water as the formal oxidant, with no added conventional oxidants. Along with the abundant availability of water, these processes also generate dihydrogen gas as the reaction coproduct, which is a highly valuable fuel. Several well-defined molecular metal complexes have been reported in recent years to catalyze these unusual oxidative reactions with water. A ruthenium bipyridine-based PNN pincer complex was reported by us to catalyze the oxidation of primary alcohols to carboxylate salts with alkaline water along with H₂ liberation, followed by reports by other groups using other complexes as catalysts. At the same time, ruthenium-, iridium-, and rhodium-based complexes have been reported to catalyze aldehyde oxidation to carboxylic acids using water. Our group has combined the catalytic aqueous alcohol and aldehyde oxidation activity of a ruthenium complex to achieve the oxidation of biomass-derived renewable aldehydes such as furfural and 5-hydroxymethylfurfural (HMF) to furoic acid and furandicarboxylic acid (FDCA), respectively, using alkaline water as the oxidant, liberating H₂. Ruthenium complexes with an acridine-based PNP ligand have also been employed by our group for the catalytic oxidation of amines to the corresponding lactams, or to carboxylic acids via a deaminative route, using water. Similarly, we also reported molecular complexes for the catalytic Markovnikov oxidation of alkenes to ketones using water, similar to Wacker-type oxidation, which, however, does not require any terminal oxidant and produces H₂ as the coproduct. At the same time, the oxidation of enol ethers to the corresponding esters with water has also been reported. This account will highlight these recent advances where water was used as an oxidant to carry out selective oxidation reactions of organic compounds, catalyzed by well-defined molecular complexes, with H₂ liberation. The oxidation of alcohols, aldehydes, amines, alkenes, and enol ethers will be discussed to provide an outlook toward other functional groups' oxidation. We hope that this will aid researchers in devising other oxidative dehydrogenative catalytic systems using water, complementing traditional oxidative processes involving strong oxidants and molecular oxygen.

Ligand-Based Control of Nickel Catalysts: Switching Chemoselectivity from One-Electron to Two-Electron Pathways in Competing Reactions of 4-Halotetrahydropyrans

Development of nickel-catalyzed transformations would be facilitated by an improved ability to predict which ligands promote and suppress competing mechanisms. We evaluate ligand-based modulation of catalyst preference for one- or two-electron pathways employing 4-halotetrahydropyrans as model substrates that can undergo divergent reaction pathways. Chemoselectivity for one- or two-electron oxidative addition is predicted by ligand class. Phosphine-ligated nickel catalysts favor closed-shell oxidative addition. In contrast, nitrogen-ligated nickel catalysts prefer the one-electron pathway, initiating with halogen atom transfer.

Sustainable catalysis with fluxional acridine-based PNP pincer complexes

Because of the widespread use of fossil fuels and the resulting global warming, development of sustainable catalytic transformations is now more important than ever to obtain our desired fuels and building materials with the least carbon footprint and waste production. Many sustainable (de)hydrogenation reactions, including CO2 reduction, H2 carrier systems, and others, have been reported using molecular pincer complexes. A specific subset of pincer complexes containing a central acridine donor with flanking CH2PR2 ligands, known as acridine-based PNP pincer complexes, exhibit special reactivities that are not imitable by other PNP pincer complexes such as pyridine-based or (R2PCH2CH2)2NH type ligands. The goal of this article is to highlight the unique reactivities of acridine-based complexes and then investigate how these reactivities allow these complexes to catalyse many sustainable reactions that traditional pincer complexes cannot catalyse. To that end, we will initially go over the synthesis and structural features of acridine complexes, such as the labile coordination of the central N donor and the observed fac-mer fluxionality. Following that, distinct reactivity patterns of acridine-based complexes including their reactivity with acids and water will be discussed. Finally, we will discuss the reaction systems that have been developed with acridine complexes thus far, including the notable selective transformations of primary alcohols to primary amines using ammonia, N-heteroaromatic synthesis from alcohols and ammonia, oxidation reactions with water with H2 liberation, development of H2 carrier systems, and others, and conclude the article with future possible directions. We hope that the systemic study presented here will aid researchers in developing further sustainable reactions based on the unique acridine-based pincer complexes.

Dehydrogenative ester synthesis from enol ethers and water with a ruthenium complex catalyzing two reactions in synergy

We report the dehydrogenative synthesis of esters from enol ethers using water as the formal oxidant, catalyzed by a newly developed ruthenium acridine-based PNP(Ph)-type complex. Mechanistic experiments and density functional theory (DFT) studies suggest that an inner-sphere stepwise coupled reaction pathway is operational instead of a more intuitive outer-sphere tandem hydration-dehydrogenation pathway.

Hole utilization in solar hydrogen production

In photochemical production of hydrogen from water, the hole-mediated oxidation reaction is the rate-determining step. A poor solar-to-hydrogen efficiency is usually related to a mismatch between the internal quantum efficiency of photon-induced hole generation and the apparent quantum yield of hydrogen. This waste of photogenerated holes is unwanted yet unavoidable. Although great progress has been made, we are still far away from the required level of dexterity to deal with the associated challenges of wasted holes and its consequential chemical effects that have placed one of the greatest bottlenecks in attaining high solar-to-hydrogen efficiency. A critical assessment of the hole and its related phenomena in solar hydrogen production would, therefore, pave the way moving forward. In this regard, we focus on the contextual and conceptual understanding of the dynamics and kinetics of photogenerated holes and its critical role in driving redox reactions, with the objective of guiding future research. The main reasons behind and consequences of unused holes are examined and different approaches to improve overall efficiency are outlined. We also highlight yet unsolved research questions related to holes in solar fuel production.

Synthesis of 2-hydroxytetrahydrofurans by Wacker-type oxidation of 1,1-disubstituted alkenes

1,1-Disubstituted alkenes feature high steric hindrance, which renders their Wacker-type oxidation difficult. We demonstrate the stereoselective synthesis of 2-hydroxytetrahydrofurans via the Wacker-type oxidation of 3-methyl-3-buten-1-ols by using a PdCl₂(MeCN)₂/NO/BQ catalyst system under 1 atm O₂ in H₂O or H₂O/DMF.

Water oxidation by Brønsted acid-catalyzed in situ generated thiol cation: dual function of the acid catalyst leading to transition metal-free substitution and addition reactions of S-S bonds

An unprecedented water oxidation reaction by a small organic molecule, i.e., the thiol cation generated in situ by Brønsted acid-catalyzed heterolytic cleavage of S-S bond of a disulfide, is observed...

Efficient Base-Free Aqueous Reforming of Methanol Homogeneously Catalyzed by Ruthenium Exhibiting a Remarkable Acceleration by Added Catalytic Thiol

Production of H2 by methanol reforming is of particular interest due the low cost, ready availability, and high hydrogen content of methanol. However, most current methods either require very high temperatures and pressures or strongly rely on the utilization of large amounts of base. Here we report an efficient, base-free aqueous-phase reforming of methanol homogeneously catalyzed by an acridine-based ruthenium pincer complex, the activity of which was unexpectedly improved by a catalytic amount of a thiol additive. The reactivity of this system is enhanced by nearly 2 orders of magnitude upon addition of the thiol, and it can maintain activity for over 3 weeks, achieving a total H2 turnover number of over 130 000. On the basis of both experimental and computational studies, a mechanism is proposed which involves outer-sphere dehydrogenations promoted by a unique ruthenium complex with thiolate as an assisting ligand. The current system overcomes the need for added base in homogeneous methanol reforming and also highlights the unprecedented acceleration of catalytic activity of metal complexes achieved by the addition of a catalytic amount of thiol.

Assembly of a Dihydrideborate and Two Aryl Nitriles to Form a C,N,N′-Pincer Ligand Coordinated to Osmium

The C,N,N′-donor aryl-diimineborate pincer ligand of the complexes OsH₂{κ³-C,N,N-[C₆H₃RCH=NB(cat)N=CHC₆H₄R]}(PⁱPr₃)₂ (R = H, Me) has been generated in a one-pot procedure, by the reaction of the hexahydride OsH₆(PⁱPr₃)₂ with catecholborane (catBH) and two molecules of the corresponding aryl nitrile. The osmium–pincer bonding situation has been analyzed by means of atoms in molecules (AIM), natural bond orbital (NBO), and energy decomposition analysis coupled with the natural orbitals for chemical valence (EDA-NOCV) methods. According to the results, the complexes exhibit a rather strong electron-sharing Os–C bond, two weaker donor–acceptor N–Os bonds, and two π-back-donations from the transition metal to vacant π* orbitals of the formed metallacycles. In addition, spectroscopic findings and DFT calculations reveal that the donor units of the pincer are incorporated in a sequential manner. First, the central Os–N bond is formed, by the reaction of the dihydrideborate ligand of the intermediate OsH₃{κ²-H,H-(H₂Bcat)}(PⁱPr₃)₂ with one of the aryl nitriles. The subsequent oxidative addition of the o-C–H bond of the aryl substituent of the resulting κ¹-N-(N-boryl-arylaldimine) affords the Os–C bond. Finally, the second Os–N bond is generated from a hydride, an ortho-metalated N-boryl-arylaldimine, and the second aryl nitrile.

Highly efficient additive-free dehydrogenation of neat formic acid

Formic acid (FA) is a promising hydrogen carrier which can play an instrumental role in the overall implementation of a hydrogen economy. In this regard, it is important to generate H₂ gas from neat FA without any solvent/additive, for which existing systems are scarce. Here we report the remarkable catalytic activity of a ruthenium 9H-acridine pincer complex for this process. The catalyst is unusually stable and robust in FA even at high temperatures and can catalyse neat FA dehydrogenation for over a month, with a total turnover number of 1,701,150, while also generating high H₂/CO₂ gas pressures (tested up to 100 bars). Mechanistic investigations and DFT studies are conducted to fully understand the molecular mechanism to the process. Overall, the high activity, stability, selectivity, simplicity and versatility of the system to generate a CO-free H₂/CO₂ gas stream and high pressure from neat FA makes it promising for large-scale implementation.

Catalytic Hydrogenation of Thioesters, Thiocarbamates, and Thioamides

Direct hydrogenation of thioesters with H₂ provides a facile and waste-free method to access alcohols and thiols. However, no report of this reaction is documented, possibly because of the incompatibility of the generated thiol with typical hydrogenation catalysts. Here, we report an efficient and selective hydrogenation of thioesters. The reaction is catalyzed by an acridine-based ruthenium complex without additives. Various thioesters were fully hydrogenated to the corresponding alcohols and thiols with excellent tolerance for amide, ester, and carboxylic acid groups. Thiocarbamates and thioamides also undergo hydrogenation under similar conditions, substantially extending the application of hydrogenation of organosulfur compounds.

Catalytic Oxidative Deamination by Water with H2 Liberation

Selective oxidative deamination has long been considered to be an important but challenging transformation, although it is a common critical process in the metabolism of bioactive amino compounds. Most of the synthetic methods developed so far rely on the use of stoichiometric amounts of strong and toxic oxidants. Here we present a green and efficient method for oxidative deamination, using water as the oxidant, catalyzed by a ruthenium pincer complex. This unprecedented reaction protocol liberates hydrogen gas and avoids the use of sacrificial oxidants. A wide variety of primary amines are selectively transformed to carboxylates or ketones in good to high yields. It is noteworthy that mechanistic experiments and DFT calculations indicate that in addition to serving as the oxidant, water also plays an important role in assisting the hydrogen liberation steps involved in amine dehydrogenation.

Metal-ligand-Lewis acid multi-cooperative catalysis: a step forward in the Conia-ene reaction

An original multi-cooperative catalytic approach was developed by combining metal–ligand cooperation and Lewis acid activation. The [(SCS)Pd]₂ complex featuring a non-innocent indenediide-based ligand was found to be a very efficient and versatile catalyst for the Conia-ene reaction, when associated with Mg(OTf)₂. The reaction operates at low catalytic loadings under mild conditions with HFIP as a co-solvent. It works with a variety of substrates, including those bearing internal alkynes. It displays complete 5-exo vs. 6-endo regio-selectivity. In addition, except for the highly congested ^tBu-substituent, the reaction occurs with high Z vs. E stereo-selectivity, making it synthetically useful and complementary to known catalysts.

An original multi-cooperative catalytic approach was developed by combining metal–ligand cooperation and Lewis acid activation.

Recent advances in Wacker oxidation: from conventional to modern variants and applications

Recent developments in the well-known Wacker oxidation process from conventional to modern variants and applications to natural products' synthesis are compiled in this review.