A Nonalternant Aromatic Belt: Methylene-Bridged [6]Cycloparaphenylene Synthesized from Pillar[6]arene

Catching Fullerenes: Synthesis of Molecular Nanogloves

Herein, we report the synthesis of a new series of rigid, all meta-phenylene, conjugated deep-cavity molecules, displaying high binding affinity towards buckyballs. A facile synthetic approach with an overall combined yield of approximately 53% in the last two steps has been developed using a templating strategy that combines the general structure of resorcin[4]arene and [12]cyclo-meta-phenylene. These two moieties are covalently linked via four acetal bonds, resulting in a glove-like architecture. 1H NMR titration experiments reveal fullerene binding affinities (Ka) exceeding ≥106 M-1. The size complementarity between fullerenes and these scaffolds maximizes CH⋯π and π⋯π interactions, and their host:guest adduct resembles a ball in a glove, hence their name as nanogloves. Fullerene recognition is tested by suspending carbon soot in a solution of nanoglove in 1,1,2,2-tetrachloroethane, where more than a dozen fullerenes are observed, ranging from C60 to C96.

Stable cationic nanobelts synthesized by chemical oxidation of methylene-bridged [6]cycloparaphenylene

Nanobelts are cyclic arenes that only consist of annulated structures. Recently, various types of nanobelts have been synthesized and their unique properties have been unveiled. However, cationic nanobelts without heteroatoms have been rarely synthesized, and their properties are of significant interest from both fundamental and application perspectives. Herein, we report the synthesis of radical cationic and dicationic hydrocarbon nanobelts by chemical oxidation of methylene-bridged [6]cycloparaphenylene ([6]MCPP). These cationic species are remarkably stable in air, which made it possible to measure and uncover their structural and electronic properties. Notably, the [6]MCPP dicationic salt has sharp absorption and fluorescence bands at longer wavelengths than those of neutral [6]MCPP, close to the near-infrared region. From both experimental and theoretical investigation, the existence of a strong diatropic belt current in [6]MCPP dication was indicated. In addition, a longer lifetime was observed for the hexamethyl[6]MCPP dicationic salt than for the [6]MCPP dicationic salt in solution.

Water-Soluble Aromatic Nanobelt with Unique Cellular Internalization

A water-soluble aromatic nanobelt was synthesized, and its cellular uptake behavior in HeLa cells was investigated. The late-stage functionalization of the parent methylene-bridged [6]cycloparaphenylene ([6]MCPP) provided an easily accessible alkyne-functionalized nanobelt in a single reaction step. The alkyne-substituted [6]MCPP was subjected to Cu-catalyzed azide-alkyne cycloaddition by using a dye-attached azide to obtain a water-soluble aromatic nanobelt. Cell-imaging experiments on the synthesized nanobelt in HeLa cells revealed stop-and-go cellular uptake dynamics. Similar experiments with control molecules and theoretical studies indicated that the unique dynamics of the nanobelt was derived from the belt-shaped structure.

Fluorinated Conjugated Microporous Polymers Based on Pillar[n]arenes for Removal of Water Pollutants and Their Cation Selective Adsorption

Organic dyes are widely used in many applications. However, the leakage of organic dyes into the natural environment has become a severe and worldwide problem owing to their high toxicity and nonbiodegradability. Therefore, the development of effective removal technologies for organic dyes is required. In this article, we report the synthesis and adsorption properties of highly fluorinated conjugated microporous polymers based on pillar[n]arenes. The polymers exhibited large Brunauer-Emmett-Teller surface areas of up to 1063 m2 g-1 and selective adsorptive removal of cationic organic dyes from aqueous solutions. Comparison with the nonfluorinated polymers indicated that the adsorption mechanism mainly relies on the fluorine-cation electrostatic interaction. The maximum adsorption capacity reached 313 mg g-1 for crystal violet, which is higher than those of conventional adsorbents. Additionally, the fluorinated polymers could function as proton channels when they were embedded into lipid membranes.

Construction of hydrocarbon belts based on macrocyclic arenes

Hydrocarbon belts have garnered significant attention due to their intriguing structures, unique properties, and potential applications in supramolecular chemistry and materials science. However, their highly inherently strained structures pose challenges in their synthesis, and the resulting tedious synthesis strategies hinder their large-scale applications. Utilizing unstrained macrocyclic arenes as precursors presents an efficient strategy, allowing for a strain-induction step that mitigates the energy barrier associated with building strain in the formation of these belts. Accessible unstrained macrocyclic precursors play a pivotal role in enabling efficient and large-scale syntheses of highly strained belts, facilitating their broader practical applications. This review provides an overview of the recent advancements in the construction of hydrocarbon belts using accessible macrocyclic arenes as building blocks. The synthetic strategies for these partially and fully conjugated hydrocarbon belts are discussed, along with their unique properties. We hope that this review will inspire the development of novel nanocarbon molecules, opening pathways for emerging areas and applications.

Pillar[5]arenes decorated with six-membered-ring aromatics at all the substitution positions

Macrocyclic molecules have characteristic properties different from linear ones, such as high symmetry and guest-inclusion ability. To bring drastic changes to these properties, direct introduction of many substituents is a challenging but effective tool. Herein, we attain direct installation of ten six-membered-ring aromatic π-units into both rims of a pillar[5]arene. In contrast to previous pillar[n]arenes with less hindered five-membered-ring units, which showed conformational complexity and crushed crystal structures, the per-phenyl-substituted pillar[5]arene has a cylinder-shaped crystal structure with a dichloromethane inside the cavity and is obtained as a single pair of D 5-symmetric enantiomers. The average dihedral angles between the core and peripheral benzene rings sharply increase from 38° to 66°. These differences indicate the importance of local steric repulsion on both rims for determining the structures and properties of macrocycles.

Conformational Landscapes and Energetics of Carbon Nanohoops and their Ring-in-Ring Complexes

Carbon nanohoops are promising precursors for the synthesis of nanotubes, whose structural dynamics are not well understood. Here, we investigate the conformational landscape and energetics of cycloparaphenylenes (CPPs), a methylene-bridged CPP and a carbon nanobelt. These nanohoops can form host-guest complexes with other rings, and understanding their structure is crucial for predicting their properties and identifying potential applications. We used a combination of ion mobility, tandem mass spectrometry, and density functional theory to characterize the nanohoops and their ring-in-ring complexes, following the energetics and conformations of their disassembly from intact complexes to fragment ions. Our results show structural integrity of the nanohoops and host-guest complexes. They also reveal interesting trends in size, packing density, stability, and structure between [6]CPP, the methylene-bridged CPP, and the carbon nanobelt as guests in ring-in-ring complexes. Taken together, our work illustrates how mass spectrometry data can help to unravel the rules that govern the formation of carbon nanohoop assemblies.

A Bis-Porphyrin Cavitand Breathing-In to Constrict Bucky Balls

Bis-porphyrin cages have long been exploited to bind fullerenes selectively for various applications. The major consideration for an effective binding here had been the cavity size. Herein, we structurally demonstrate that a bis-Ni-porphyrin cavitand having even a smaller cavity can host a larger fullerene by a breathing and ruffling mechanism. It has also been shown that both the electronic and steric influence at the meso- positions of the porphyrin in fact dictate the binding character. The smaller cavity of 2NiD exhibits preferential binding for C70 over C60; however, surprisingly, the larger cavities in 2HD and 2NiTD display stronger affinities for C60 over the larger fullerene. We show here that the structural elasticity infused both by the metalloporphyrins and the connecting bridges play a major role in directing the binding. These conclusions have adequately been supported by structural and spectroscopic investigations. Additionally, the suitability of one of the conjugates for photoinduced charge-separation has been investigated using ultrafast transient absorption measurements. 2NiD⊃C60 has a charge separation timescale of ~0.8 ps, while charge recombination occurs at a longer timescale of ~920 ps.

Synthesis and properties of an O-doped aromatic belt

A new macrocyclic arene, dibenzofuran[3]arene, was synthesized, which could be conveniently transformed to an O-doped aromatic belt with a rigid ring-shaped structure and deep cavity. Moreover, the O-doped aromatic belt also showed a high HOMO energy and a narrow HOMO-LUMO gap experimentally and theoretically.

Insight into the interaction of host-guest structures for pyrrole-based metal compounds and C70

This study focuses on the recognition and isolation of fullerenes, which are crucial for further exploration of their physical and chemical properties. Our goal is to investigate the potential recognition of the D5h-C70 fullerene using crown-shaped metal compositions through density functional theory calculations. We assess the effectiveness of fullerene C70 recognition by studying the binding energy. Additionally, various analyses were conducted, including natural bond order charge analysis and reduced density gradient analysis, to understand the interaction mechanism between the host and guest molecules. These investigations provide valuable insights into the nature of the interaction and the stability of the host-guest system. To facilitate the release of the fullerene guest molecule, the vis-NIR spectra were simulated for the host-guest structures. This analysis offers guidance on the specific wavelengths that can be utilized to release the fullerene guest from the host-guest structures. Overall, this work proposes a new strategy for the effective recognition of various fullerene molecules and their subsequent release from host-guest systems. These findings could potentially be applied in assemblies involving fullerenes, advancing their practical applications.

Carbon Nanomaterial Fluorescent Probes and Their Biological Applications

Fluorescent carbon nanomaterials have broadly useful chemical and photophysical attributes that are conducive to applications in biology. In this review, we focus on materials whose photophysics allow for the use of these materials in biomedical and environmental applications, with emphasis on imaging, biosensing, and cargo delivery. The review focuses primarily on graphitic carbon nanomaterials including graphene and its derivatives, carbon nanotubes, as well as carbon dots and carbon nanohoops. Recent advances in and future prospects of these fields are discussed at depth, and where appropriate, references to reviews pertaining to older literature are provided.

Synthesis and Properties of Fluorenone-Containing Cycloparaphenylenes and Their Late-Stage Transformation

Cycloparaphenylenes (CPPs) are the smallest possible armchair carbon nanotubes, the properties of which strongly depend on their ring size. They can be further tuned by either peripheral functionalization or by replacing phenylene rings for other aromatic units. Here we show how four novel donor-acceptor chromophores were obtained by incorporating fluorenone or 2-(9H-fluoren-9-ylidene)malononitrile into the loops of two differently sized CPPs. Synthetically, we managed to perform late-stage functionalization of the fluorenone-based rings by high-yielding Knoevenagel condensations. The structures were confirmed by X-ray crystallographic analyses, which revealed that replacing a phenylene for a fused-ring-system acceptor introduces additional strain. The donor-acceptor characters of the CPPs were supported by absorption and fluorescence spectroscopic studies, electrochemical studies (displaying the CPPs as multi-redox systems undergoing reversible or quasi-reversible redox events), as well as by computations. The oligophenylene parts were found to comprise the electron donor units of the macrocycles and the fluorenone parts the acceptor units.

A step towards rational design of carbon nanobelts with tunable electronic properties

Belt-shaped aromatic compounds are among the most attractive classes of radial π-conjugated nanocarbon molecules with unique physical and chemical properties. In this work, we computationally studied a number of all-carbon and heteroatom-bridged nanobelts, as well as their inclusion complexes with fullerene C60. Our results provide a useful guide for modulating the electronic properties of the nanobelts. An in-depth analysis of the ground and excited state properties of their complexes has allowed us to establish structure-property relationships and propose simple principles for the design of nanobelts with improved electron-donating properties suitable for photovoltaic applications.

Alkali metals doped cycloparaphenylene nanohoops: Promising nonlinear optical materials with enhanced performance

In the ongoing pursuit of novel and efficient NLO materials, the potential of alkali metal-doped {6}cycloparaphenylene ({6}CPP) and methylene bridged {6} cycloparaphenylene (MB{6}CPP) nanohoops as excellent NLO candidates has been explored. The geometric, electronic, linear, and nonlinear optical properties of designed systems have been investigated theoretically. All the nanohoops demonstrated thermodynamic stability, with remarkable interaction energies reaching up to -1.39 eV (-0.0511 au). Notably, the introduction of alkali metals led to a significant reduction in the HOMO-LUMO energy gaps, with values as low as 2.92 eV, compared to 6.80 eV and 6.06 eV for undoped {6}CPP and MB{6}CPP, respectively. Moreover, the alkali metal-doped nanohoops exhibited exceptional NLO response, with the K@r6-{6}CPP complex achieving the highest first hyperpolarizability of 56,221.7 × 10-30 esu. Additionally, the frequency-dependent first hyperpolarizability values are also computed at two commonly used wavelengths of 1550 nm and 1907 nm, respectively. These findings highlight the potential of designed nanohoops as promising candidates for advanced NLO materials with high-tech applications.

Nanoscale Saturn Systems Based on C60/70 Bucky Ball and a Newly Designed [4]Cyclopara-1,2-diphenylethylene Hoop: A Strategy for Fullerene Encapsulation Release and Selective Recognition for C70

A new carbonaceous nanohoop, [4]cyclopara-1,2-diphenylethylene ([4]CPDPE, composed by four 1,2-diphenylethylene units linked via the para of the phenyls), is designed together with two rational synthesis paths being proposed. The Saturn-like host-guest systems formed with the [4]CPDPE nanoring and fullerene C_60/70 are explored using density functional theory calculations. The results evidence that the geometry mutual matching between [4]CPDPE and C_60/70 is perfect, and the [4]CPDPE⊃C_60/70 complexes could be formed spontaneously with high binding energies. Thermodynamic calculation results show that it essentially prefers to selectively recognize C₇₀ over its smaller cousin C₆₀. More interestingly, the [4]CPDPE nanoring could present the regular ring cylinder and the saddle shapes via configuration transformation between its all-trans form and all-cis form, so as to theoretically realize the fullerene encapsulation and release under photoirradiation. Furthermore, the 2:1 interaction structure ([4]CPDPE₂⊃Dimer-C₆₀) and properties are investigated. Additionally, the ultraviolet-visible (UV-vis) spectra are simulated, and host-guest noncovalent interaction (NCI) regions are investigated based on the electron density and reduced density gradient (RDG), which may be helpful for a deep understanding of the present designed systems in future.

Electrostatic Potential for Exploring Electron Delocalization in Infinitenes, Circulenes, and Nanobelts

The π-conjugation, aromaticity, and stability of the newly synthesized 12-infinitene and of other infinitenes comprising 8-, 10-, 14-, and 16-arene rings are investigated using density functional theory. The π-electron delocalization and aromatic character rooted in infinitenes are quantified in terms of molecular electrostatic potential (MESP) topology. Structurally, the infinitene bears a close resemblance of its helically twisted structure to the infinity symbol. The MESP topology shows that infinitene possesses an infinity-shaped delocalization of the electron density that streams over the fused benzenoid rings. The parameter ∑i=13Δλi, derived from the eigenvalues (λ_i) corresponding to the MESP minima, is used for quantifying the aromatic character of arene rings of infinitene. The structure, stability, and MESP topology features of 8-, 10-, 12-, 14-, and 16-infinitenes are also compared with the corresponding isomeric circulenes and carbon nanobelts. Further, the strain in all such systems is evaluated by considering the respective isomeric planar benzenoid hydrocarbons as reference systems. The 12-infinitene turns out to be the most aromatic and the least strained among all the systems examined.

Metal Atoms (Li, Na, and K) Tuning the Configuration of Pyrrole for the Selective Recognition of C60

Host-guest structure assembly is significant in the recognition of molecules, and the fullerene-based host-guest structure is a convenient method to determine the structures of fullerenes of which recognition is with many difficulties in experiments. Here, with density functional theory calculations, we designed several crown-shaped pyrrole-based hosts tuned by doping metal atoms (Li, Na, and K) for the effective recognition of C₆₀ with modest interaction between the host and guest. Binding energy calculations showed an enhanced interaction of the concave-convex host-guest system with the doped metal atoms, enabling the selective recognition of C₆₀. The electrostatic interaction between the host and guest was studied by the natural bond order charge analysis, reduced density gradient, and electrostatic potential. Furthermore, the UV-vis-NIR spectra of host-guest structures were simulated to give guidance on the release of the fullerene guest. With much expectation, this work would give a new strategy to design new hosts for effectively recognizing much more fullerene molecules with modest interaction and would be useful for the assembly involving fullerenes.

Per-Arylation of Pillar[n]arenes: An Effective Tool to Modify the Properties of Macrocycles

Installation of various substituents is a reliable and versatile way to alter the properties of macrocyclic molecules, but high-yield and controlled methods are not always available especially for multifold reactions. Herein, we report 10- and 12-fold introduction of aryl substituents onto both rims of cylinder-shaped pillar[n]arenes, which usually have alkoxy substituents slanting to the cylinder axes. Although alkoxy pillar[5]arenes exist as D₅-symmetric enantiomeric pairs, arylated pillar[5]arenes provide crushed single-crystal structures and stereoisomerism including C₂-symmetric conformations depending on the aryl groups. Pillar[n]arenes with 2-benzofuranyl groups display bright fluorescence with quantum yields of 88-90% and no host-guest complexation with electron-deficient molecules in solution due to large deviation from alkoxy compounds. A benzofuran-appended pillar[6]arene instead captures small gaseous molecules in the solid state, probably owing to outside spaces surrounded by aromatic rings.

Acceleration Effect of Bowl-Shaped Structure in Aerobic Oxidation Reaction: Synthesis of Homosumanene ortho-Quinone and Azaacene-Fused Homosumanenes

An oxidation reaction of hydroxyhomosumanene on silica gel providing homosumanene ortho-quinone and its synthetic application for azaacene-fused homosumanenes is described. Hydroxyhomosumanene is photochemically oxidized by air, when it is coated on silica gel; this aerobic oxidation proceeds faster than that of planar analogues. The difference of such reactivity was attributed to the unusual keto-enol tautomerization due to structural difference between planar and curved π-system. The homosumanene ortho-quinone was used in the synthesis of several azaacene-fused homosumanenes, azaacenohomosumanenes. X-ray diffraction analysis of the single crystals revealed their columnar stacking structures due to the interactions between each bowl. Azaacenohomosumanenes exhibited high electron affinity due to the combination of buckybowl and electron-deficient azaacene moieties.

A Fourfold Gold(I)-Aryl Macrocycle with Hyperbolic Geometry and its Reductive Elimination to a Carbon Nanoring Host

An ethylene glycol-decorated [6]cyclo-meta-phenylene (CMP) macrocycle was synthesized and utilized as a subunit to construct a fourfold Au^I ₂ -aryl metallacycle with an overall square arrangement. The corners consist of rigid dinuclear gold(I) complexes previously known to form only triangular metallacycles. The interplay between the conformational flexibility of the [6]CMP macrocycle and the rigid dinuclear gold(I) moieties enable the square geometry, as revealed by single-crystal X-ray diffraction. The formation of the gold complex shows size-selectivity compared to an alternative route using platinum(II) corner motifs. Upon reductive elimination, an all-organic ether-decorated carbon nanoring was obtained. Investigation as a host for the complexation of large guest molecules with a suitable convex π-surfaces was accomplished using isothermal NMR binding titrations. Association constants for [6]cycloparaphenylene ([6]CPP), [7]CPP, C₆₀ , and C₇₀ were determined.

Highly efficient charge transport across carbon nanobelts

Carbon nanobelts (CNBs) are a new form of nanocarbon that has promising applications in optoelectronics due to their unique belt-shaped π-conjugated systems. Recent synthetic breakthrough has led to the access to various CNBs, but their optoelectronic properties have not been explored yet. In this work, we study the electronic transport performance of a series of CNBs by incorporating them into molecular devices using the scanning tunneling microscope break junction technique. We show that, by tuning the bridging groups between the adjacent benzenes in the CNBs, we can achieve remarkably high conductance close to 0.1 G₀, nearly one order of magnitude higher than their nanoring counterpart cycloparaphenylene. Density functional theory-based calculations further elucidate the crucial role of the structural distortion played in facilitating the unique radial π-electron delocalization and charge transport across the belt-shaped carbon skeletons. These results develop a basic understanding of electronic transport properties of CNBs and lay the foundation for further exploration of CNB-based optoelectronic applications.

Pyrene-Bridged Expanded Carbaporphyrin Nanobelts

Two belt-like expanded carbaporphyrins (NB1 and NB2) were prepared via a one-pot procedure that involves a [6 + 3] condensation between a pyrene-bearing tetrapyrrole precursor (2) and pentafluorobenzaldehyde, followed by oxidation. Single crystal X-ray diffraction analyses revealed that NB1 and NB2 both contain six dipyrromethene moieties and three bridging pyrene units. In the structure of NB1, there are two vertically orientated pyrene units and one transverse orientated pyrene unit; however, in NB2 all three pyrene units are vertically orientated. The structural differences between NB1 and NB2 are reflected in their respective physical properties as revealed by proton NMR, UV-vis, and fluorescence spectroscopies. In contrast to all-carbon nanobelts, NB1 and NB2 contain multiple pyrrolic nitrogen donors that could serve as potential metal coordination sites. As a test of this possibility, NB2 was used to prepare an unprecedented Zn complex containing 7 Zn²⁺ metal centers connected by a network of bridging atoms, as confirmed by a single crystal X-ray diffraction analysis. To the best of our knowledge, this is the first example of a belt-like molecular system that can coordinate multiple metal ions both along the backbone and within its central cavity.

GOx-assisted synthesis of pillar[5]arene based supramolecular polymeric nanoparticles for targeted/synergistic chemo-chemodynamic cancer therapy

Background

Cancer is the most serious world's health problems on the global level and various strategies have been developed for cancer therapy. Pillar[5]arene-based supramolecular therapeutic nano-platform (SP/GOx NPs) was constructed successfully via orthogonal dynamic covalent bonds and intermolecular H-bonds with the assistance of glucose oxidase (GOx) and exhibited efficient targeted/synergistic chemo-chemodynamic cancer therapy.

Methods

The morphology of SP/GOx NPs was characterized by DLS, TEM, SEM and EDS mapping. The cancer therapy efficinecy was investigated both in vivo and in vitro.

Results

SP/GOx NPs can load drug molecules (Dox) and modify target molecule (FA-Py) on its surface conveniently. When the resultant FA-Py/SP/GOx/Dox NPs enters blood circulation, FA-Py will target it to cancer cells efficiently, where GOx can catalyst the overexpressed glucose to generate H₂O₂. Subsequently, the generated H₂O₂ in cancer cells catalyzed by ferrocene unit to form •OH, which can kill cancer cells. Furthermore, the loaded Dox molecules released under acid microenvironment, which can further achieve chemo-therapy.

Conclusion

All the experiments showed that the excellent antitumor performance of FA-Py/SP/GOx/Dox NPs, which provided an new method for pillar[5]arene-based supramolecular polymer for biomedical applications.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-01237-0.

Fullerene-containing pillar[n]arene hybrid composites

The construction and application of fullerene-containing pillar[n]arene organic–inorganic hybrid composites/systems has been discussed and summarized.

Molecular Möbius Strips: Twist for A Bright Future

Attributed to their unique structural features and associated intriguing properties, molecular Möbius strips have attracted considerable attention. However, the precise synthesis of such attractive molecules remains a great challenge. Recently,...

A Conjugated Figure-of-Eight Oligoparaphenylene Nanohoop with Adaptive Cavities Derived from Cyclooctatetrathiophene Core

A fully conjugated figure-of-eight nanohoop is presented with facile synthesis. The molecule's lemniscular skeleton features the combination of two strained oligoparaphenylene loops and a flexible cyclooctatetrathiophene core. Its rigid yet guest-adaptive cavities enable the formation of the peanut-like 1:2 host-guest complexes with C₆₀ or C₇₀ , which have been confirmed by X-ray crystallography and characterized in solution. Further computational studies suggest notable geometric variations and non-covalent interactions of the cavities upon binding with different fullerenes, as well as overall conjugation comparable to cycloparaphenylenes.

Macrocyclic host molecules with aromatic building blocks: the state of the art and progress

Macrocyclic host molecules play the central role in host-guest chemistry and supramolecular chemistry. The highly structural symmetry of macrocyclic host molecules can meet people's pursuit of aesthetics in molecular design, and generally means a balance of design, synthesis, properties and applications. For macrocyclic host molecules with highly symmetrical structures, building blocks, which could be described as repeat units as well, are the most fundamental elements for molecular design. The structural features and recognition ability of macrocyclic host molecules are determined by the building blocks and their connection patterns. Using different building blocks, different macrocyclic host molecules could be designed and synthesized. With decades of developments of host-guest chemistry and supramolecular chemistry, diverse macrocyclic host molecules with different building blocks have been designed and synthesized. Aromatic building blocks are a big family among the various building blocks used in constructing macrocyclic host molecules. In this feature article, the recent developments of macrocyclic host molecules with aromatic building blocks were summarized and discussed.

Naphthodithiophene Diimide Based Chiral π-Conjugated Nanopillar Molecules

The synthesis, structures, and properties of [4]cyclonaphthodithiophene diimides ([4]C-NDTIs) are described. NDTIs as important n-type building blocks were catenated in the α-positions of thiophene rings via an unusual electrochemical-oxidation-promoted macrocyclization route. The thiophene-thiophene junction in [4]C-NDTIs results in an ideal pillar shape. This interesting topology, along with appealing electronic and optical properties inherited from the NDTI units, endows the [4]C-NDTIs with both near-infrared (NIR) light absorptions, strong excitonic coupling, and tight encapsulation of C₆₀ . Stable orientations of the NDTI units in the nanopillars lead to stable inherent chirality, which enables detailed circular dichroism studies on the impact of isomeric structures on π-conjugation. Remarkably, the [4]C-NDTIs maintain the strong π-π stacking abilities of NDTI units and thus adopt two-dimensional (2D) lattice arrays at the molecular level. These nanopillar molecules have great potential to mimic natural photosynthetic systems for the development of multifunctional organic materials.

Synthesis and Chiral Resolution of Twisted Carbon Nanobelts

Twisted carbon nanobelts could display persistent chirality, which is desirable for material applications, but their synthesis is very challenging. Herein, we report the successful synthesis and chiral resolution of such a kind of molecules (1-H and 1) with a figure-eight configuration. 1-H was synthesized first by macrocyclization through Suzuki coupling reaction followed by benzannulation via Bi(OTf)₃-mediated cyclization reaction of vinyl ether. Oxidative dehydrogenation of 1-H gave the fully π-conjugated 1. Their twisted structures were confirmed by X-ray crystallographic analysis and calculations, and they can be resolved by chiral high-performance liquid chromatography. The isolated enantiomers showed persistent chiroptical properties according to the circular dichroism measurements, with moderate |g_abs| values (0.0016 for 1-H and 0.005-0.007 for 1). Their photophysical properties were also briefly studied.

Selective Oxidation of Belt[4]arene[4]tropilidene and Its Application to Construct Hydrocarbon Belts of Truncated Cone Structure with Expand Cavity

Despite their unique structures, tantalizing properties, and potential applications in carbon nanoscience and technology, the synthesis and functionalization of zigzag hydrocarbon nanobelts have remained largely unexplored until recently. Reported herein is the selective transformations of belt[4]arene[4]tropilidenes and their application in the construction of novel belts. The oxidation of belt[4]arene[4]tropilidene with benzeneseleninic anhydride under controlled conditions selectively afforded mono- to tetrakis(α-diketone)-functionalized belt intermediates. A subsequent condensation reaction with 1,2-phenylenediacetonitrile and 1,2-phenylenediamine produced a diversity of unprecedented belts with various macrocyclic cavities.

Pillar[5]arene-Based Dual Chiral Organoboranes with Allowed Host-Guest Chemistry and Circularly Polarized Luminescence

We first describe two examples of highly luminescent organoboranes (NP5BN1 and NP5BN2) with dual chirality that were achieved by molecular functionalization of planar chiral pillar[5]arenes with naphthyls. Sufficiently strong steric effects are imposed by triarylamine (Ar₃N) and triarylborane (Ar₃B) moieties and further enhanced by the proximity of the chiral building blocks, leading to the isolation of multiple enantiomers via chiral high-performance liquid chromatography. The intramolecular charge transfer from N-donor to B-acceptor across both chiral subunits enabled the circularly polarized luminescence and thermally robust colorimetric responses in their emissions. Furthermore, their remarkable host-guest chemistry was allowed at no expense in the pursuit of advanced chiroptical properties using pillar[5]arene-based supramolecular scaffolds.

Conjugated Nanohoops Incorporating Donor, Acceptor, Hetero- or Polycyclic Aromatics

In the last 13 years several synthetic strategies were developed that provide access to [n]cycloparaphenylenes ([n]CPPs) and related conjugated nanohoops. A number of potential applications emerged, including optoelectronic devices, and their use as templates for carbon nanomaterials and in supramolecular chemistry. To tune the structural or optoelectronic properties of carbon nanohoops beyond the size-dependent effect known for [n]CPPs, a variety of aromatic rings other than benzene were introduced. In this Review, we provide an overview of the syntheses, properties, and applications of conjugated nanohoops beyond [n]CPPs with intrinsic donor/acceptor structure or such that contain acceptor, donor, heteroaromatic or polycyclic aromatic units within the hoop as well as conjugated nanobelts.

Conjugated Molecular Nanotubes

Molecular compounds with permanent tubular architectures displaying radial π-conjugation are exceedingly rare. Their radial and axial delocalization presents them with unique optical and electronic properties, such as remarkable tuning of their Stokes shifts, and redox switching between global and local aromaticity. Although these tubular compounds display large internal void spaces, these attributes have not been extensively explored, thus presenting future opportunities in the development of materials. By using cutting-edge synthetic methodologies to bend aromatic surfaces, large opportunities in synthesis, property discovery, and applications are expected in new members of this family of conjugated molecular nanotubes.

On-Surface Synthesis of Giant Conjugated Macrocycles

We have achieved an on-surface synthesis of giant conjugated macrocycles having a diameter of ≈7 nm and consisting of up to 30 subunits. The synthesis started with a debrominative coupling of the molecular precursors on a hot Ag(111) surface, leading to the formation of arched oligomeric chains and macrocycles. These products were revealed by scanning tunneling microscopy in combination with density functional theory to be covalent oligomers. These intermediates also display C-Ag organometallic bonds between parallel molecular subunits due to site-selective debromination and the asymmetric molecular conformation. Subsequent cyclodehydrogenation at higher temperatures steered the final conjugation of the macrocycles. Our findings provide a novel design strategy toward π-conjugated macrocycles and open up new opportunities for the precise synthesis of organic nanostructures.

A Green Fluorescent Nitrogen-Doped Aromatic Belt Containing a [6]Cycloparaphenylene Skeleton

The design and synthesis of nitrogen-doped aromatic belts with conjugated structures still remain a challenge. Here, we report the first nitrogen-doped aromatic belt with a [6]cycloparaphenylene skeleton, which is conveniently synthesized from the easily available calix[3]carbazole. The aromatic belt has a rigid conjugated structure and deep cavity, and it can encapsulate one dichloromethane both in solution and in the solid state. Interestingly, the aromatic belt shows strong green fluorescence with a quantum yield of 0.39 and exhibits a narrow HOMO-LUMO energy gap of 2.02 eV. The belt-shaped conjugated structure composed of three carbazole subunits has specific optoelectronic properties that will promote wide applications in supramolecular chemistry and materials science.

Scalable, Divergent Synthesis of a High Aspect Ratio Carbon Nanobelt

Carbon nanobelts are molecules of high fundamental and technological interest due to their structural similarity to carbon nanotubes, of which they are molecular cutouts. Despite this attention, synthetic accessibility is a major obstacle, such that the few known strategies offer limited structural diversity, functionality, and scalability. To address this bottleneck, we have developed a new strategy that utilizes highly fused monomer units constructed via a site-selective [2 + 2 + 2] cycloaddition and a high-yielding zirconocene-mediated macrocyclization to achieve the synthesis of a new carbon nanobelt on large scale with the introduction of functional handles in the penultimate step. This nanobelt represents a diagonal cross section of an armchair carbon nanotube and consequently has a longitudinally extended structure with an aspect ratio of 1.6, the highest of any reported nanobelt. This elongated structure promotes solid-state packing into aligned columns that mimic the parent carbon nanotube and facilitates unprecedented host-guest chemistry with oligo-arylene guests in nonpolar solvents.

1,3-Diradicals Embedded in Curved Paraphenylene Units: Singlet versus Triplet State and In-Plane Aromaticity

Curved π-conjugated molecules and open-shell structures have attracted much attention from the perspective of fundamental chemistry, as well as materials science. In this study, the chemistry of 1,3-diradicals (DRs) embedded in curved cycloparaphenylene (CPPs) structures, DR-(n+3)CPPs (n = 0-5), was investigated to understand the effects of the curvature and system size on the spin-spin interactions and singlet versus triplet state, as well as their unique characteristics such as in-plane aromaticity. A triplet ground state was predicted for the larger 1,3-diradicals, such as the seven- and eight-paraphenylene-unit-containing diradicals DR-7CPP (n = 4) and DR-8CPP (n = 5), by quantum chemical calculations. The smaller-sized diradicals DR-(n+3)CPPs (n = 0-3) were found to possess singlet ground states. Thus, the ground-state spin multiplicity is controlled by the size of the paraphenylene cycle. The size effect on the ground-state spin multiplicity was confirmed by the experimental generation of DR-6CPP in the photochemical denitrogenation of its azo-containing precursor (AZ-6CPP). Intriguingly, a unique type of in-plane aromaticity emerged in the smaller-sized singlet states such as S-DR-4CPP (n = 1), as proven by nucleus-independent chemical shift calculations (NICS) and an analysis of the anisotropy of the induced current density (ACID), which demonstrate that homoconjugation between the 1,3-diradical moiety arises because of the curved and distorted bonding system.