Validation of the CoGEF Method as a Predictive Tool for Polymer Mechanochemistry

A Mechanochromic Rotaxane that Releases Azetidine-Trityl-Maleimide, a Versatile Fluorescent Probe

Force sensing at the molecular level has enabled the study of materials failure and it offers great promises for the investigation of mechanobiological processes. Traditional force probes rely on the reversible or irreversible activation of mechanochromic precursors to assess transient or permanent changes in polymer networks. A promising approach involves force-controlled release of sensing molecules, as the accumulation of chromic molecules at specific sites would enable the recording of deformation histories. However, many fluorescent probes are limited by environmental sensitivity, specific release conditions, or low release efficiency. Maleimide-based dyes, especially amino maleimides, offer a robust alternative due to their small size, structural versatility, and tuneable fluorescence properties. Here, we present a mechanochromic rotaxane device that releases an azetidine-trityl-maleimide (ATM) fluorescent probe via a retro-[4+2] cycloaddition reaction. ATM is a rigidochromic, chemically stable, and environmentally insensitive probe, generated exclusively through rotaxane actuation, underscoring the unique mechanochemical properties of rotaxanes. This device holds potential for applications in material science and biology, such as the investigation of polymer networks and active tissues.

Enabling Selective Mechanochemical Scission of Network Crosslinks by Exchanging Single Carbon Atoms for Silicon

The tearing of a polymer network arises from mechanochemically coupled bond-breaking events in the backbone of a polymer chain. An emerging research area is the identification of molecular strategies for network toughening, such as the strategic placement of mechanochemically reactive groups (e.g., scissile mechanophores) in the crosslinks of a network instead of in the load-bearing primary strands. These mechanically labile crosslinkers have typically relied on release of ring strain or weak covalent bonds for selective covalent bond scission. Here, we report a novel chemical design for accelerated mechanochemical bond scission based on replacing a single carbon atom in a crosslinker with a silicon atom. This single-atom replacement affords up to a two-fold increase in the tearing energy. We suggest a mechanism, validated by computational modeling, for accelerated mechanochemical Si-C bond scission based on minimizing the energy required to distort the starting material toward the transition-state geometry. We demonstrated the seamless incorporation of these scissile carbosilanes to toughen 3D-printed networks, which demonstrates their suitability for additive manufacturing processes.

A Dual-Pathway Responsive Mechanophore for Intelligent Luminescent Polymer Materials

Mechanoluminescent units, when integrated into polymer matrices, undergo structural transformations in response to mechanical force, resulting in changes in fluorescence. This phenomenon holds considerable promise for the development of stress-sensing materials. Despite the high demand for robust, tunable mechanoluminescent mechanophores for force assessment and smart force-responsive materials, strategies for their design and synthesis remain underdeveloped. In an attempt to address this challenge, we have introduced a novel dual-pathway responsive mechanophore, bis(2-(2-(tert-butyldimethylsilanyloxy)benzylidene)amino)aryl disulfides (SSTBS), which, when incorporated into polymer chains, exhibits fluorescence upon the combined application of force and chemical stimulus, irrespective of their sequence. This property is facilitated by the disulfide bond's sensitivity to mechanical force and the fluoride anion-induced desilylation and deprotonation. Notably, the force-responsive threshold of the SSTBS mechanophore can be finely tuned by TBAF treatment, as supported by both experimental and computational studies, providing a simple, yet effective means, to regulate polymer force responsiveness on demand. We believe that the strategy developed in this investigation will shed light on the design of mechanophores for the fabrication of intelligent luminescent polymer materials and advance the development of smart force-reporting systems.

The Role of Torsion on the Force-Coupled Reactivity of a Fluorenyl Naphthopyran Mechanophore

The unique reactivity of molecules under force commands an understanding of structure-mechanochemical activity relationships. While conceptual frameworks for understanding force transduction in many systems are established, systematic investigations into force-coupled molecular torsions are limited. Here, we describe a novel fluorenyl naphthopyran mechanophore for which mechanical force is uniquely coupled to the torsional motions associated with the overall chemical transformation as a result of the conformational rigidity imposed by the fluorene group. Using a combined experimental and theoretical approach, we demonstrate that variation in the pulling geometry on the fluorene subunit results in significant differences in mechanochemical activity due to pronounced changes in how force is coupled to distinct torsional motions and their coherence with the nuclear motions that accompany the force-free ring-opening reaction. Notably, subtle changes in polymer attachment position lead to a >50% difference in the rate of mechanochemical activation in ultrasonication experiments. Our results offer new insights into the structural and geometric factors that influence mechanochemical reactivity by describing how mechanical force is coupled to a reaction that principally involves torsional motions.

The Design, Synthesis, and Characterization of Photochromic and Mechanochromic Functional Fibers

Mechanically responsive polymer materials have garnered significant interest due to their unique ability to respond to external forces, leading to groundbreaking applications in visual stress mapping and damage detection. However, their use in fibers remains relatively unexplored. In this study, a mechanoresponsive polymer is synthesized by incorporating a spiropyran (SP) mechanophore into a polyurethane backbone. Based on this mechanoresponsive polyurethane, mechanochromic fibers are fabricated via solution spinning. The fibers exhibits a clear color change from colorless to blue when subjected to external tensile stress or ultraviolet irradiation, triggered by the activation of the SP mechanophore. Furthermore, the mechanical sensitivity of the fibers can be tailored by adjusting the orientation of the polymer chains through hot stretching. Fibers subjected to higher pre-stretching during post-processing displayed a mechanochromic response at lower strain levels. Various pre-stretched fibers are then made into a barcode, which exhibits distinct dynamic information via color change during stretching. The innovative application of function fibers, capable of storing information through mechanochromic response, offers a novel approach to the development of anti-counterfeit fibers.

Advancing the Mechanosensitivity of Atropisomeric Diarylethene Mechanophores through a Lever-Arm Effect

Understanding structure-mechanical activity relationships (SMARs) in polymer mechanochemistry is essential for the rational design of mechanophores with desired properties, yet SMARs in noncovalent mechanical transformations remain relatively underexplored. In this study, we designed a subset of diarylethene mechanophores based on a lever-arm hypothesis and systematically investigated their mechanical activity toward a noncovalent-yet-chemical conversion of atropisomer stereochemistry. Results from Density functional theory (DFT) calculations, single-molecule force spectroscopy (SMFS) measurements, and ultrasonication experiments collectively support the lever-arm hypothesis and confirm the exceptional sensitivity of chemo-mechanical coupling in these atropisomers. Notably, the transition force for the diarylethene M3 featuring extended 5-phenylbenzo[b]thiophene aryl groups is determined to be 131 pN ± 4 pN by SMFS. This value is lower than those typically recorded for other mechanically induced chemical processes, highlighting its exceptional sensitivity to low-magnitude forces. This work contributes a fundamental understanding of chemo-mechanical coupling in atropisomeric configurational mechanophores and paves the way for designing highly sensitive mechanochemical processes that could facilitate the study of nanoscale mechanical behaviors across scientific disciplines.

Molecular dynamics model of mechanophore sensors for biological force measurement

Cellular forces regulate an untold spectrum of living processes, such as cell migration, gene expression, and ion conduction. However, a quantitative description of mechanical control remains elusive due to the lack of general, live-cell tools to measure discrete forces between biomolecules. Here we introduce a computational pipeline for force measurement that leverages well-defined, tunable release of a mechanically activated small molecule fluorophore. These sensors are characterized using a multiscale approach combining equilibrium and steered QM/MM molecular dynamics models to capture the chemical, mechanical, and conformational transitions underlying force activation thresholds on a nano Newton scale. We find that chemical modification of the mechanophore and variation of its biomolecular tethers can tune the rate-determining step for fluorophore release and adjust the mechanochemical activation barrier. The models offer a new molecular framework for calibrated, programmable biomolecular force reporting within the live-cell regime, opening new opportunities to study mechanical phenomena in biological systems.

Versatile Mechanochemical Reactions Via Tailored Force Transmission in Mechanophores

In polymer mechanochemistry, regulating the intrinsic mechanical reactivity of a mechanophore offers extensive opportunities in material science, enabling the development of hierarchical and multifunctional polymer-based materials. Recent advances have focused on innovating various types of mechanophores with inherent reactivity (e.g. regioselectivity and stereoselectivity). However, little attention has been given to modulating their reactivity by tailoring force transmission within mechanophores. Here, we introduce a novel approach through the implementation of a cyclic pulling geometry into an anthracene-maleimide (AM) mechanophore. This approach manipulates force transmission within the mechanophore and effectively regulates its reactivity from 0.0160 min-1 to 0.00133 min-1, achieving up to a 12-fold change. Mechanochemical coupling analysis indicates that the split force transmission along ring chains contributes to the significant difference in mechanochemical reactivity. By leveraging the distinct force transmission pathways within cyclic and linear AM mechanophores, we covalently integrate them with a spiropyran mechanophore to design tandem mechanophore systems for hierarchical mechanochemical activation. These findings highlight the efficacy and versatility of the cyclic pulling strategy in modulating mechanophore reactivity, providing valuable insights for the design of tunable multifunctional polymer-based materials.

Force-Activated Spin-Crossover in Fe2+ and Co2+ Transition Metal Mechanophores

Transition metal mechanophores exhibiting force-activated spin-crossover are attractive design targets, yet large-scale discovery of them has not been pursued due in large part to the time-consuming nature of trial-and-error experiments. Instead, we leverage density functional theory (DFT) and external force explicitly included (EFEI) modeling to study a set of 395 feasible Fe2+ and Co2+ mechanophore candidates with tridentate ligands that we curate from the Cambridge Structural Database. Among nitrogen-coordinating low-spin complexes, we observe the prevalence of spin crossover at moderate force, and we identify 155 Fe2+ and Co2+ spin-crossover mechanophores and derive their threshold force for low-spin to high-spin transition (FSCO). The calculations reveal strong correlations of FSCO with spin-splitting energies and coordination bond lengths, facilitating rapid prediction of FSCO using force-free DFT calculations. Then, among all Fe2+ and Co2+ spin-crossover mechanophores, we further identity 11 mechanophores that combine labile spin-crossover and good mechanical robustness that are thus predicted to be the most versatile for force-probing applications. We discover two classes of mer-symmetric complexes comprising specific heteroaromatic rings within extended π-conjugation that give rise to Fe2+ mechanophores with these characteristics. We expect the set of spin-crossover mechanophores, the design principles, and the computational approach to be useful in guiding the high-throughput discovery of transition metal mechanophores with diverse functionalities and broad applications, including mechanically activated catalysis.

Accelerated Mechanochemical Bond Scission and Stabilization against Heat and Light in Carbamoyloxime Mechanophores

Current approaches to the discovery of mechanochemical reactions in polymers are limited by the interconnection of the zero-force and force-modified potential energy surfaces since most mechanochemical reactions are force-biased thermal reactions. Here, carbamoyloximes are developed as a mechanophore class in which the mechanochemical reaction rates counterintuitively increase together with the thermal stability. All carbamoyloxime mechanophores undergo force-induced homolytic bond scission at the N-O bond, and their mechanochemical scission rate increases with the degree of substitution on the α-substituent. Yet, carbamoylaldoximes react to both heat and light with a pericyclic syn elimination, while carbamoylketoximes undergo thermal decomposition at high temperature and photochemical homolytic scission only from the triplet state. Thereby, the mechanochemical and thermal reaction trajectories are separated, and the thermal stability increases alongside the mechanochemical reaction kinetics. This approach may play an important role in the future of systematic mechanochemical reaction discovery.

On the Interplay Between Force, Temperature, and Electric Fields in the Rupture Process of Mechanophores

The use of oriented external electric fields (OEEFs) shows promise as an alternative approach to chemical catalysis. The ability to target a specific bond by aligning it with a bond-weakening electric field may be beneficial in mechanochemical reactions, which use mechanical force to selectively rupture bonds. Previous computational studies have focused on a static description of molecules in OEEFs, neglecting to test the influence of thermal oscillations on molecular stability. Here, we performed ab initio molecular dynamics (AIMD) simulations based on density functional theory (DFT) to investigate the behaviour of a model mechanophore under the simultaneous influence of thermal and electric field effects. We show that the change in bond length caused by a strong electric field is largely independent of the temperature, both without and with mechanical stretching forces applied to the molecule. The amplitude of thermal oscillations increases with increasing field strength and temperature, but at low temperatures, the application of mechanical force leads to an additional increase in amplitude. Our research shows that methods for applying mechanical force and OEEFs can be safely combined and included in an AIMD simulation at both low and high temperatures, allowing researchers to computationally investigate mechanochemical reactions in realistic application scenarios.

In-situ monitoring of polymer mechanochemistry: what can be learned from small molecule systems

Using mechanical energy to drive chemical transformations is an exciting prospect to improve the sustainability of chemical reactions and to produce products not achievable by more traditional methods. In-situ monitoring of reaction pathways and chemical transformations is vital to deliver the reproducible results required for scale up to realize the potential of mechanochemistry beyond the chemistry lab. This mini review will discuss the recent advances in in-situ monitoring of ball milling and polymer mechanochemistry, highlighting the potential for shared knowledge for scale up.

Mechanochemically responsive polymer enables shockwave visualization

Understanding the physical and chemical response of materials to impulsive deformation is crucial for applications ranging from soft robotic locomotion to space exploration to seismology. However, investigating material properties at extreme strain rates remains challenging due to temporal and spatial resolution limitations. Combining high-strain-rate testing with mechanochemistry encodes the molecular-level deformation within the material itself, thus enabling the direct quantification of the material response. Here, we demonstrate a mechanophore-functionalized block copolymer that self-reports energy dissipation mechanisms, such as bond rupture and acoustic wave dissipation, in response to high-strain-rate impacts. A microprojectile accelerated towards the polymer permanently deforms the material at a shallow depth. At intersonic velocities, the polymer reports significant subsurface energy absorption due to shockwave attenuation, a mechanism traditionally considered negligible compared to plasticity and not well explored in polymers. The acoustic wave velocity of the material is directly recovered from the mechanochemically-activated subsurface volume recorded in the material, which is validated by simulations, theory, and acoustic measurements. This integration of mechanochemistry with microballistic testing enables characterization of high-strain-rate mechanical properties and elucidates important insights applicable to nanomaterials, particle-reinforced composites, and biocompatible polymers.

Photochemical [2 + 2] Cycloaddition Enables the Synthesis of Highly Thermally Stable and Acid/Base-Resistant Polyesters from a Nonpolymerizable α,β-Conjugated Valerolactone

We report a simple strategy to transform a nonpolymerizable six-membered α,β-conjugated lactone, 5,6-dihydro-2H-pyran-2-one (DPO), into polymerizable bicyclic lactones via photochemical [2 + 2] cycloaddition. Two bicyclic lactones, M1 and M2, were obtained by the photochemical [2 + 2] cycloaddition of tetramethylethylene and DPO. Ring-opening polymerization (ROP) of M1 and M2 catalyzed by diphenyl phosphate (DPP), La[N(SiMe3)2]3, and 1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris (dimethylamino) phosphoranylide-namino]-2λ5, 4λ5-catenadi(phosphazene) (tBu-P4) were conducted. M1 is highly polymerizable, either DPP or La[N(SiMe3)2]3 could catalyze its living ROP under mild conditions, affording the well-defined PM1 with a predictable molar mass and low dispersity. M2 could only be polymerized with tBu-P4 as the catalyst, also generating the same polymer PM1. PM1 has high thermal stability, with a Td,5% being up to 376 °C. Ring-opening copolymerization (ROcP) of M1 and δ-valerolactone (δ-VL) catalyzed by La[N(SiMe3)2]3 afforded a series of random copolymers with enhanced thermal stabilities. Both PM1 and the copolymer containing 10 mol % M1 exhibited excellent resistance to acidic and basic hydrolysis. Our results demonstrate that direct photochemical [2 + 2] cycloaddition of α,β-conjugated valerolactone is not only a strategy to tune its polymerizability, but also allows for the synthesis of highly thermally stable aliphatic polyesters, inaccessible by other methods.

Mechanochemical generation of aryne

Mechanical force is unique in promoting unusual reaction pathways and especially for the generation of reactive intermediates sometimes inaccessible to other forms of activation. The mechanochemical generation of reactive species could find application in synthetic and materials chemistry alike. However, the nature of these reactive intermediates has been mostly limited to radicals or carbenes. Here, we present a new mechanophore that generates a reactive aryne intermediate upon dissociation of a benzocyclobutene (BCB) core via a force-promoted retro [2 + 2] cycloaddition.

Mechanical scission of a knotted polymer

Molecular knots and entanglements form randomly and spontaneously in both biological and synthetic polymer chains. It is known that macroscopic materials, such as ropes, are substantially weakened by the presence of knots, but until now it has been unclear whether similar behaviour occurs on a molecular level. Here we show that the presence of a well-defined overhand knot in a polymer chain substantially increases the rate of scission of the polymer under tension (≥2.6× faster) in solution, because deformation of the polymer backbone induced by the tightening knot activates otherwise unreactive covalent bonds. The fragments formed upon severing of the knotted chain differ from those that arise from cleavage of a similar, but unknotted, polymer. Our solution studies provide experimental evidence that knotting can contribute to higher mechanical scission rates of polymers. It also demonstrates that entanglement design can be used to generate mechanophores that are among the most reactive described to date, providing opportunities to increase the reactivity of otherwise inert functional groups.

Oriented External Electric Field Controls the Rupture Forces in Mechanophores

Controlling the reactivity of molecules under a mechanical pull has generated significant interest in organic and polymer chemistry. Inducing mechano-lability for otherwise rigid molecules has been possible through structural alterations like adjusting the pulling group, ring strain, and electron density of the scissile bond. In this article, we report that an oriented external electric field (OEEF) can significantly assist in mechanochemical transformations. Using a structurally diverse set of ring-opening reactions, 1(a)-4(a), we show that the critical force required for bond-cleavage, Frup, gets appreciably reduced when the OEEF acts in-phase with the bond-polarity direction. The primary condition for utilizing OEEF along with mechanochemistry is the requirement of structural asymmetry along the target bond. Effectively therefore, any polar ring-opening reaction might be manipulated by OEEF. The versatility of the strategy of using OEEF and mechanical force together can also be appreciated by the enhanced rupture force when the direction of the OEEF is flipped. We show that mechanical pulling and electric field can act as entwined twins toward mechano-lability.

Molecular Ball Joints: Mechanochemical Perturbation of Bullvalene Hardy-Cope Rearrangements in Polymer Networks

The solution-state fluxional behavior of bullvalene has fascinated physical organic and supramolecular chemists alike. Little effort, however, has been put into investigating bullvalene applications in bulk, partially due to difficulties in characterizing such dynamic systems. To address this knowledge gap, we herein probe whether bullvalene Hardy-Cope rearrangements can be mechanically perturbed in bulk polymer networks. We use dynamic mechanical analysis to demonstrate that the activation barrier to the glass transition process is significantly elevated for bullvalene-containing materials relative to "static" control networks. Furthermore, bullvalene rearrangements can be mechanically perturbed at low temperatures in the glassy region; such behavior facilitates energy dissipation (i.e., increased hysteresis energy) and polymer chain alignment to stiffen the material (i.e., increased Young's modulus) under load. Computational simulations corroborate our work that showcases bullvalene as a reversible "low-force" covalent mechanophore in the modulation of viscoelastic behavior.

Advancing Dynamic Polymer Mechanochemistry through Synergetic Conformational Gearing

Harnessing mechanical force to modulate material properties and enhance biomechanical functions is essential for advancing smart materials and bioengineering. Polymer mechanochemistry provides an emerging toolkit for exploring unconventional chemical transformations and modulating molecular structures through mechanical force. One of the key challenges is developing innovative force-sensing mechanisms for precise and in situ force detection. This study introduces mDPAC, a dynamic and sensitive mechanophore, demonstrating its mechanochromic properties through synergetic conformational gearing. Its unique mechanoresponsive mechanism is based on the simultaneous conformational synergy between its phenazine and phenyl moieties, facilitated by a worm-gear-like structure. We confirm mDPAC's complex mechanochemical response and elucidate its mechanotransduction mechanism through our experimental data and comprehensive simulations. The compatibility of mDPAC with hydrogels is particularly notable, highlighting its potential for applications in aqueous biological environments as a dynamic force sensor. Moreover, mDPAC's multicolored mechanochromic responses facilitate direct force sensing and visual detection, paving the way for precise and real-time mechanical force sensing in bulk materials.

Mechanically triggered on-demand degradation of polymers synthesized by radical polymerizations

Polymers that degrade on demand have the potential to facilitate chemical recycling, reduce environmental pollution and are useful in implant immolation, drug delivery or as adhesives that debond on demand. However, polymers made by radical polymerization, which feature all carbon-bond backbones and constitute the most important class of polymers, have proven difficult to render degradable. Here we report cyclobutene-based monomers that can be co-polymerized with conventional monomers and impart the resulting polymers with mechanically triggered degradability. The cyclobutene residues act as mechanophores and can undergo a mechanically triggered ring-opening reaction, which causes a rearrangement that renders the polymer chains cleavable by hydrolysis under basic conditions. These cyclobutene-based monomers are broadly applicable in free radical and controlled radical polymerizations, introduce functional groups into the backbone of polymers and allow the mechanically gated degradation of high-molecular-weight materials or cross-linked polymer networks into low-molecular-weight species.

Pushing vs Pulling: The Unique Geometry of Mechanophore Activation in a Rotaxane Force Actuator

Mechanophores (mechanosensitive molecules) are usually activated by pulling them with covalently attached polymers. A rotaxane actuator offers a new geometry of activation as the macrocycle pushes against a stoppering mechanophore. Here we compare both pulling and pushing activations and show that pushing is more efficient and selective than pulling. We found that the pulling activation of a bulky furan/maleimide adduct occurs via two competing dissociation pathways: retrocycloaddition and heterolytic cleavage (generating a trityl cation in the process), while the same adduct only cleaves by retrocycloaddition during pushing activation. These results further demonstrate the efficacy and versatility of rotaxane actuators.

Molecular Probing of the Microscopic Pressure at Contact Interfaces

Obtaining insights into friction at the nanoscopic level and being able to translate these into macroscopic friction behavior in real-world systems is of paramount importance in many contexts, ranging from transportation to high-precision technology and seismology. Since friction is controlled by the local pressure at the contact it is important to be able to detect both the real contact area and the nanoscopic local pressure distribution simultaneously. In this paper, we present a method that uses planarizable molecular probes in combination with fluorescence microscopy to achieve this goal. These probes, inherently twisted in their ground states, undergo planarization under the influence of pressure, leading to bathochromic and hyperchromic shifts of their UV-vis absorption band. This allows us to map the local pressure in mechanical contact from fluorescence by exciting the emission in the long-wavelength region of the absorption band. We demonstrate a linear relationship between fluorescence intensity and (simulated) pressure at the submicron scale. This relationship enables us to experimentally depict the pressure distribution in multiasperity contacts. The method presented here offers a new way of bridging friction studies of the nanoscale model systems and practical situations for which surface roughness plays a crucial role.

Mechanochemical Hydrolysis of Polysaccharide Biomass: Scope and Mechanistic Insights

Mechanical forces can affect chemical reactions in a way that thermal reactions cannot do, which may have a variety of applications. In biomass conversion, the selective conversion of cellulose and chitin is a grand challenge because they are the top two most abundant resources and recalcitrant materials that are insoluble in common solvents. However, recent works have clarified that mechanical forces enable the depolymerization of these polysaccharides, leading to the selective production of corresponding monomers and oligomers. This article reviews the mechanochemical hydrolysis of cellulose and chitin, particularly focusing on the scope and mechanisms to show a landscape of this research field and future subjects. We introduce the background of mechanochemistry and biomass conversion, followed by recent progress on the mechanochemical hydrolysis of the polysaccharides. Afterwards, a considerable space is devoted to the mechanistic consideration on the mechanochemical reactions.

A Thermally Stable SO2-Releasing Mechanophore: Facile Activation, Single-Event Spectroscopy, and Molecular Dynamic Simulations

Polymers that release small molecules in response to mechanical force are promising candidates as next-generation on-demand delivery systems. Despite advancements in the development of mechanophores for releasing diverse payloads through careful molecular design, the availability of scaffolds capable of discharging biomedically significant cargos in substantial quantities remains scarce. In this report, we detail a nonscissile mechanophore built from an 8-thiabicyclo[3.2.1]octane 8,8-dioxide (TBO) motif that releases one equivalent of sulfur dioxide (SO2) from each repeat unit. The TBO mechanophore exhibits high thermal stability but is activated mechanochemically using solution ultrasonication in either organic solvent or aqueous media with up to 63% efficiency, equating to 206 molecules of SO2 released per 143.3 kDa chain. We quantified the mechanochemical reactivity of TBO by single-molecule force spectroscopy and resolved its single-event activation. The force-coupled rate constant for TBO opening reaches ∼9.0 s-1 at ∼1520 pN, and each reaction of a single TBO domain releases a stored length of ∼0.68 nm. We investigated the mechanism of TBO activation using ab initio steered molecular dynamic simulations and rationalized the observed stereoselectivity. These comprehensive studies of the TBO mechanophore provide a mechanically coupled mechanism of multi-SO2 release from one polymer chain, facilitating the translation of polymer mechanochemistry to potential biomedical applications.

Bicyclo[2.2.0]hexene: A Multicyclic Mechanophore with Reactivity Diversified by External Forces

Polymer mechanochemistry has been established as an enabling tool in accessing chemical reactivity and reaction pathways that are distinctive from their thermal counterparts. However, eliciting diversified reaction pathways by activating different constituent chemical bonds from the same mechanophore structure remains challenging. Here, we report the design of a bicyclo[2.2.0]hexene (BCH) mechanophore to leverage its structural simplicity and relatively low molecular symmetry to demonstrate this idea of multimodal activation. Upon changing the attachment points of pendant polymer chains, three different C-C bonds in bicyclo[2.2.0]hexene are specifically activated via externally applied force by sonication. Experimental characterization confirms that in different scenarios of polymer attachment, the regioisomers of BCH undergo different activation reactions, entailing retro-[2+2] cycloreversion, 1,3-allylic migration, and retro-4π ring-opening reactions, respectively. Control experiments with small-molecule analogues reveal that the observed diversified reactivity of BCH regioisomers is possible only with mechanical force. Theoretical studies further elucidate that the differences in the positions of substitution between regioisomers have a minimal impact on the potential energy surface of the parent BCH scaffold. The mechanochemical selectivity between different C-C bonds in each constitutional isomer is a result of selective and effective coupling of force to the aligned C-C bond in each case.

Incorporation of a self-immolative spacer enables mechanically triggered dual payload release

Polymers that release functional small molecules in response to mechanical force are promising materials for a variety of applications including drug delivery, catalysis, and sensing. While many different mechanophores have been developed that enable the triggered release of a variety of small molecule payloads, most mechanophores are limited to one specific payload molecule. Here, we leverage the unique fragmentation of a 5-aryloxy-substituted 2-furylcarbinol derivative to design a novel mechanophore capable of the mechanically triggered release of two distinct cargo molecules. Critical to the mechanophore design is the incorporation of a self-immolative spacer to facilitate the release of a second payload. By varying the relative positions of each cargo molecule conjugated to the mechanophore, dual payload release occurs either concurrently or sequentially, demonstrating the ability to fine-tune the release profiles.

Multimechanophore Polymers for Mechanically Triggered Small Molecule Release with Ultrahigh Payload Capacity

Polymers that release small molecules in response to mechanical force are promising for a variety of applications including drug delivery, catalysis, and sensing. While a number of mechanophores have been developed for the release of covalently bound payloads, existing strategies are either limited in cargo scope or, in the case of more general mechanophore designs, are restricted to the release of one or two cargo molecules per polymer chain. Herein, we introduce a nonscissile mechanophore based on a masked 2-furylcarbinol derivative that enables the preparation of multimechanophore polymers with ultrahigh payload capacity. We demonstrate that polymers prepared via ring-opening metathesis polymerization are capable of releasing hundreds of small-molecule payloads per polymer chain upon ultrasound-induced mechanochemical activation. This nonscissile masked 2-furylcarbinol mechanophore overcomes a major challenge in cargo loading capacity associated with previous 2-furylcarbinol mechanophore designs, enabling applications that benefit from much higher concentrations of delivered cargo.

Polymer mechanochemistry: from single molecule to bulk material

The field of polymer mechanochemistry has experienced a renaissance over the past decades, primarily propelled by the rapid development of force-sensitive molecular units (i.e., mechanophores) and principles governing the reactivity of polymer networks for mechanochemical transduction or material strengthening. In addition to fundamental guidelines for converting mechanical energy input into chemical output, there has also been increasing focus on engineering applications of polymer mechanochemistry for specific functions, mechanically adaptive material systems, and smart devices. These endeavors are made possible by multidisciplinary approaches involving the development of multifunctional mechanophores for mechanoresponsive polymer systems, mechanochemical catalysis and synthesis, three-dimensional (3D) printed mechanochromic materials, reasonable design of polymer network topology, and computational modeling. The aim of this minireview is to provide a summary of recent advancements in covalent polymer mechanochemistry. We specifically focus on productive mechanophores, mechanical remodeling of polymeric materials, and the development of theoretical concepts.

Semi-Telechelic Polymers from Mechanochemical C─C Bond Activation

Unstrained C─C bond activation is attained in homopolymers through mechanochemical bond scission followed by functionalization to yield mostly semi-telechelic polymer chains. Ball milling poly(ethylene oxide) (PEO) in the presence of 1-(bromoacetyl)pyrene (BAPy) yields the pyrene terminated PEO. Similarly, milling with 2,4'-dibromoacetophenone followed by Suzuki coupling allows the introduction of various aryl end groups. PEOs with a molecular weight below 20 kDa show no functionalization, supporting a mechanochemical mechanism. The protocol is also tested with doxorubicin, yielding the drug-polymer conjugate. PEO halogenation is also demonstrated by milling PEO with iodine, N-bromosuccinimide, or N-iodosuccinimide, which can then be reacted with an amine substituted anthracene. Grinding additional carbon polymers with BAPy indicates that this functionalization method is general for different polymer chemistries.

Sono-processes: Emerging systems and their applicability within the (bio-)medical field

Sonochemistry, although established in various fields, is still an emerging field finding new effects of ultrasound on chemical systems and are of particular interest for the biomedical field. This interdisciplinary area of research explores the use of acoustic waves with frequencies ranging from 20 kHz to 1 MHz to induce physical and chemical changes. By subjecting liquids to ultrasonic waves, sonochemistry has demonstrated the ability to accelerate reaction rates, alter chemical reaction pathways, and change physical properties of the system while operating under mild reaction conditions. It has found its way into diverse industries including food processing, pharmaceuticals, material science, and environmental remediation. This review provides an overview of the principles, advancements, and applications of sonochemistry with a particular focus on the domain of (bio-)medicine. Despite the numerous benefits sonochemistry has to offer, most of the research in the (bio-)medical field remains in the laboratory stage. Translation of these systems into clinical practice is complex as parameters used for medical ultrasound are limited and toxic side effects must be minimized in order to meet regulatory approval. However, directing attention towards the applicability of the system in clinical practice from the early stages of research holds significant potential to further amplify the role of sonochemistry in clinical applications.

Using oriented external electric fields to manipulate rupture forces of mechanophores

Oriented external electric fields (OEEFs) can facilitate chemical reactions by selectively weakening bonds. This makes them a topic of interest in mechanochemistry, where mechanical force is used to rupture specific bonds in molecules. Using electronic structure calculations based on density functional theory (DFT), we investigate the effect of OEEFs on the mechanical force required to activate mechanophores. We demonstrate that OEEFs can greatly lower the rupture force of mechanophores, and that the degree of this effect highly depends on the angle relative to the mechanical force at which the field is being applied. The greatest lowering of the rupture force does not always occur at the point of perfect alignment between OEEF and the vector of mechanical force. Using natural bond orbital analysis, we show that mechanical force amplifies the effect that an OEEF has on the scissile bond of a mechanophore. By combining methods to simulate molecules in OEEFs with methods applying mechanical force, we present an effective tool for analyzing mechanophores in OEEFs and show that computationally determining optimal OEEFs for mechanophore activation can assist in the development of future experimental studies.

Mechano-Activated Self-Immolation of Hydrogels via Signal Amplification

Cellular organisms possess intricate mechano-adaptive systems that enable them to sense forces and process them with (bio)chemical circuits for functional adaptation. Inspired by such processes, this study introduces a hydrogel system capable of mechanically activated and chemically transduced self-destruction. Our judiciously designed hydrogels can mechanically generate radicals that are processed and amplified in a self-propagating radical de-crosslinking reaction, ultimately leading to mechanically triggered self-immolation. We put such systems to work in mechano-induced debonding, and in a bilayer actuator, where swelling-induced bending generates sufficient force for selective degradation of one layer, leading to autonomous self-regulation associated with unbending. Our work helps define design criteria for molecularly controlled adaptive and self-regulating materials with embodied mechano-chemical information processing, and showcases their potential for adhesives and soft robotics.

Anomalous photochromism and mechanochromism of a linear naphthopyran enabled by a polarizing dialkylamine substituent

In contrast to common angular naphthopyrans that exhibit strong photochromic and mechanochromic behavior, constitutionally isomeric linear naphthopyrans are typically not photochromic, due to the putative instability of the completely dearomatized merocyanine product. The photochemistry of linear naphthopyrans is thus relatively understudied compared to angular naphthopyrans, while the mechanochromism of linear naphthopyrans remains completely unexplored. Here we demonstrate that the incorporation of a polarizing dialkylamine substituent enables photochromic and mechanochromic behavior from polymers containing a novel linear naphthopyran motif. In solution phase experiments, a Lewis acid trap was necessary to observe accumulation of the merocyanine product upon photochemical and ultrasound-induced mechanochemical activation. However, the same linear naphthopyran molecule incorporated as a crosslinker in polydimethylsiloxane elastomers renders the materials photochromic and mechanochromic without the addition of any trapping agent. This study provides insights into the photochromic and mechanochromic reactivity of linear naphthopyrans that have conventionally been considered functionally inert, adding a new class of naphthopyran molecular switches to the repertoire of stimuli-responsive polymers.

Naphthopyran molecular switches and their emergent mechanochemical reactivity

Naphthopyran molecular switches undergo a ring-opening reaction upon external stimulation to generate intensely colored merocyanine dyes. Their unique modularity and synthetic accessibility afford exceptional control over their properties and stimuli-responsive behavior. Commercial applications of naphthopyrans as photoswitches in photochromic ophthalmic lenses have spurred an extensive body of work exploring naphthopyran-merocyanine structure-property relationships. The recently discovered mechanochromic behavior of naphthopyrans has led to their emergent application in the field of polymer mechanochemistry, enabling advances in the design of force-responsive materials as well as fundamental insights into mechanochemical reactivity. The structure-property relationships established in the photochemical literature serve as a convenient blueprint for the design of naphthopyran molecular force probes with precisely tuned properties. On the other hand, the mechanochemical reactivity of naphthopyran diverges in many cases from the conventional photochemical pathways, resulting in unexpected properties and opportunities for deeper understanding and innovation in polymer mechanochemistry. Here, we highlight the features of the naphthopyran scaffold that render it a powerful platform for the design of mechanochromic materials and review recent advances in naphthopyran mechanochemistry.

An Algorithm Predicting the Optimal Mechanical Response of Electronic Energy Difference

The use of mechanical forces at the molecular level has been shown to be an interesting tool for modulating different chemical and physical molecular properties. The so-called covalent mechanochemistry deals with the application of precise mechanical forces that induce specific changes in the structure, stability, reactivity, and other physical properties. The use of this kind of force to modulate photophysical properties and photochemical reactivity has also been studied. Nevertheless, the general problem of mechanical modulation of the energy gap between two electronic states has been addressed only with the development of simple theoretical models. Here, we develop and implement an algorithm providing the Largest energy Gap variation with Minimal mechanical Force (LGMF) that allows the determination of the optimal mechanical forces tuning the electronic energy gap, as well as to identify the maximum mechanical response of a molecular system to the application of any mechanical stimulus. The algorithm has been implemented for diverse molecular systems showing different degrees of flexibility. The phyton code of the algorithm is available in a public repository.

Thermally Stable Photomechanical Molecular Hinge: Sterically Hindered Stiff-Stilbene Photoswitch Mechanically Isomerizes

Molecular photoswitches are extensively used as molecular machines because of the small structures, simple motions, and advantages of light including high spatiotemporal resolution. Applications of photoswitches depend on the mechanical responses, in other words, whether they can generate motions against mechanical forces as actuators or can be activated and controlled by mechanical forces as mechanophores. Sterically hindered stiff stilbene (HSS) is a promising photoswitch offering large hinge-like motions in the E/Z isomerization, high thermal stability of the Z isomer, which is relatively unstable compared to the E isomer, with a half-life of ca. 1000 years at room temperature, and near-quantitative two-way photoisomerization. However, its mechanical response is entirely unexplored. Here, we elucidate the mechanochemical reactivity of HSS by incorporating one Z or E isomer into the center of polymer chains, ultrasonicating the polymer solutions, and stretching the polymer films to apply elongational forces to the embedded HSS. The present study demonstrated that HSS mechanically isomerizes only in the Z to E direction and reversibly isomerizes in combination with UV light, i.e., works as a photomechanical hinge. The photomechanically inducible but thermally irreversible hinge-like motions render HSS unique and promise unconventional applications differently from existing photoswitches, mechanophores, and hinges.

Mechanochemically assisted morphing of shape shifting polymers

Morphing in creatures has inspired various synthetic polymer materials that are capable of shape shifting. The morphing of polymers generally relies on stimuli-active (typically heat and light active) units that fix the shape after a mechanical load-based shape programming. Herein, we report a strategy that uses a mechanochemically active 2,2'-bis(2-phenylindan-1,3-dione) (BPID) mechanophore as a switching unit for mechanochemical morphing. The mechanical load on the polymer triggers the dissociation of the BPID moiety into stable 2-phenylindan-1,3-dione (PID) radicals, whose subsequent spontaneous dimerization regenerates BPID and fixes the temporary shapes that can be effectively recovered to the permanent shapes by heating. A greater extent of BPID activation, through a higher BPID content or mechanical load, leads to higher mechanochemical shape fixity. By contrast, a relatively mechanochemically less active hexaarylbiimidazole (HABI) mechanophore shows a lower fixing efficiency when subjected to the same programing conditions. Another control system without a mechanophore shows a low fixing efficiency comparable to the HABI system. Additionally, the introduction of the BPID moiety also manifests remarkable mechanochromic behavior during the shape programing process, offering a visualizable indicator for the pre-evaluation of morphing efficiency. Unlike conventional mechanical mechanisms that simultaneously induce morphing, such as strain-induced plastic deformation or crystallization, our mechanochemical method allows for shape programming after the mechanical treatment. Our concept has potential for the design of mechanochemically programmable and mechanoresponsive shape shifting polymers.

A rational design strategy of radical-type mechanophores with thermal tolerance

Radical-type mechanophores (RMs) are attractive molecules that undergo homolytic scission of their central C-C bond to afford radical species upon exposure to heat or mechanical stimuli. However, the lack of a rational design concept limits the development of RMs with pre-determined properties. Herein, we report a rational design strategy of RMs with high thermal tolerance while maintaining mechanoresponsiveness. A combined experimental and theoretical analysis revealed that the high thermal tolerance of these RMs is related to the radical-stabilization energy (RSE) as well as the Hammett and modified Swain-Lupton constants at the para-position (σp). The trend of the RSE values is in good agreement with the experimentally evaluated thermal tolerance of a series of mechanoresponsive RMs based on the bisarylcyanoacetate motif. Furthermore, the singly occupied molecular orbital (SOMO) levels clearly exhibit a negative correlation with σp within a series of RMs that are based on the same skeleton, paving the way toward the development of RMs that can be handled under ambient conditions without peroxidation.

Force-Triggered Atropisomerization of a Parallel Diarylethene to Its Antiparallel Diastereomers

This paper describes a mechanical approach to inducing the atropisomerization of a parallel diarylethene into its antiparallel diastereomers exhibiting distinct chemical reactivity. A congested parallel diarylethene mechanophore in the (R_a,S_a)-configuration with mirror symmetry is atropisomerized to its antiparallel diastereomers with C₂ symmetry under ultrasound-induced force field. The resulting stereochemistry-converted material gains symmetry-allowed reactivity toward conrotatory photocyclization.

Designing Site Specificity in the Mechanochemical Cargo Release of Small Molecules

Mechanical force can trigger the predictable and precise release of small molecules from macromolecular carriers. In this article, based on mechanochemical simulations, we show that norborn-2-en-7-one (NEO), I, and its derivatives can selectively release CO, N₂, and SO₂ and produce two distinctly different products, A ((3E,5Z,7E)-dimethyl-5,6-diphenyldeca-3,5,7-triene-1,10-diyl bis(2-bromo-2-methylpropanoate)) and B (4',5'-dimethyl-4',5'-dihydro-[1,1':2',1''-terphenyl]-3',6'-diyl)bis(ethane-2,1-diyl) bis(2-bromo-2-methylpropanoate). Site-specific design in the pulling points (PP) ensures that by changing the regioselectivity, either A or B can be exclusively generated. Controlling the rigidity of the NEO scaffold by replacing a 6-membered ring with an 8-membered ring and concomitantly tuning the pulling groups makes it mechanolabile toward the selective formation of B. The diradical intermediate formed during I → A is predicted to be persistent for ∼150 fs. The structural design holds the key to the trade-off between mechanochemical rigidity and lability.

Increasing the Mechanical Stability of Polymer-Gold Interfacial Connection: A Parallel Covalent Strategy

Thiol-gold (S-Au) chemistry has been widely used in coating and functionalizing gold surfaces because it is robust and highly efficient. However, recent studies have shown that the S-Au-based self-assembled monolayers can lead to significant instability under external mechanical loading (e.g., in a swelled polymer film). Such instability limits further applications of S-Au chemistry-based functional materials. Here, we report a surface-modifying procedure based on a parallel covalent strategy. By employing dendritic macromolecules as a "middle layer" between the gold surface and polymer, the interfacial connecting strength increased by at least 350% as revealed by atomic force microscopy-based single molecule force spectroscopy (AFM-SMFS). The ultimate cleavage structure is confirmed to be an amide bond by control SMFS experiments, fluorescent microscopy, and dynamic force spectroscopy. This study/concept paves the way to prepare stable stimuli-responsive polymer brushes on solid surfaces and study mechanophores with high force stability.

Multicolor Chromism from a Single Chromophore through Synergistic Coupling of Mechanochromic and Photochromic Subunits

We report a versatile mechanophore exhibiting a vividly detectable, light-regulable multicolor mechanochromism. Such optical features rely on the synergistic coupling of mechanochromic bis-rhodamine (Rh) and photochromic bisthienylethene (BTE). Poly(methyl acrylate)s incorporating this bis-mechanophore can be mechanically activated under sonication. The relative distribution of the two distinctly colored and fluorescent Rh ring-opening products is altered with different magnitudes of applied force. Orthogonal use of the photochromic reaction of the BTE core can strengthen the mechanochromism and gate the mechanofluorescence in polymers. Due to increased conjugation offered by the BTE linker, both force- and light-induced optical signals display high contrast. Combined DFT simulated and experimental results reveal that the three subunits (two Rhs and one BTE) in this chromophore are activated sequentially, thus generating switchable three-colored forms and gradient optical responses.

Multicolor Mechanochromic Epoxy Thermosets That Recognize the Intensity, Type, and Duration of Mechanical Stimulation

Mechanochromic polymers that exhibit multiple color changes under external mechanical stimulation show great potential for sensor applications. Herein, an epoxy thermoset that can reveal the intensity, type, and duration of mechanical stimulation via a combination of disulfide (DS) and rhodamine (Rh) mechanochromophores is reported. A unique multicolor transition occurs upon ball mill or manual grinding because of the different activation energies of DS and Rh. The epoxy changes color depending on the ball mill grinding duration. Simultaneous activation occurs with a mechanochromic time lag between DS and Rh, and the collision energy strongly affects the relative intensity. A more dramatic multicolor response is observed using a mortar and pestle, as sequential activation occurs upon gentle and strong grinding. Various types of mechanical stimulation can cause different aggregates of the activated Rh moiety and vary the relative mechanosensitivities of Rh and DS, which lead to a different color response.

Mechanically gated formation of donor-acceptor Stenhouse adducts enabling mechanochemical multicolour soft lithography

Stress-sensitive molecules called mechanophores undergo productive chemical transformations in response to mechanical force. A variety of mechanochromic mechanophores, which change colour in response to stress, have been developed, but modulating the properties of the dyes generally requires the independent preparation of discrete derivatives. Here we introduce a mechanophore platform enabling mechanically gated multicolour chromogenic reactivity. The mechanophore is based on an activated furan precursor to donor-acceptor Stenhouse adducts (DASAs) masked as a hetero-Diels-Alder adduct. Mechanochemical activation of the mechanophore unveils the DASA precursor, and subsequent reaction with a secondary amine generates an intensely coloured DASA. Critically, the properties of the DASA are controlled by the amine, and thus a single mechanophore can be differentiated post-activation to produce a wide range of functionally diverse DASAs. We highlight this system by establishing the concept of mechanochemical multicolour soft lithography whereby a complex multicolour composite image is printed into a mechanochemically active elastomer through an iterative process of localized compression followed by reaction with different amines.

Theoretical and Experimental Investigations of Stable Arylfluorene-Based Radical-Type Mechanophores

Radical-type mechanophores (RMs) can undergo homolytic cleavage of their central C-C bonds upon exposure to mechanical forces, which affords radical species. Understanding the characteristics of these radical species allows bespoke mechanoresponsive materials to be designed and developed. The thermal stability of the central C-C bonds and the oxygen tolerance of the generated radical species are crucial characteristics that determine the functions and applicability of such RM-containing mechanoresponsive materials. In this paper, we report the synthesis and characterization of two series of arylfluorene-based RM derivatives, that is, 9,9'-bis(5-methyl-2-pyridyl)-9,9'-bifluorene (BPyF) and 9,9'-bis(4,6-diphenyl-2-triazyl)-9,9'-bifluorene (BTAF). BPyF and BTAF derivatives were synthesized without generating any peroxides initially, albeit that BPyF slowly converted to the corresponding peroxide in solution. DFT calculations revealed the importance of the thermodynamic stability and the values of the α-SOMO levels of the corresponding radical species for their thermal stability and oxygen tolerance. Furthermore, the mechanochromism of BTAF was demonstrated by ball-milling a BTAF-centered polymer, which was synthesized by atom-transfer radical polymerization (ATRP).

Mechanochemical Activation of Anthracene [4+4] Cycloadducts

Controlled formation and breaking of weak chemical bonds is a versatile method for modifying the properties of materials. Anthracene [4+4] cycloadducts are a prime example that can be formed by light and opened by external forces. We address the theoretical description of mechanochemistry of these cycloadducts, where the standard constraint geometry simulates forces approach fails due to the lack of consideration of temperature. Explicit inclusion of external forces reveals the corresponding transition barriers that are clearly dominated by rupture of the [4+4] inter-anthracene bonds. Other bonds come into play at extremely large forces only, which cannot be expected to be reached under ambient conditions. The theoretical results are in line with the experimental rheology of [4+4]-linked anthracene polymers, which indicates reversible re-formation of [4+4] cycloaddition bonds with ultraviolet light after mechanochemical bond breaking due to applied shear stress.

Mechanoresponsive Metal-Organic Cage-Crosslinked Polymer Hydrogels

We report the formation of metal-organic cage-crosslinked polymer hydrogels. To enable crosslinking of the cages and subsequent network formation, we used homodifunctionalized poly(ethylene glycol) (PEG) chains terminally substituted with bipyridines as ligands for the Pd₆ L₄ corners. The encapsulation of guest molecules into supramolecular self-assembled metal-organic cage-crosslinked hydrogels, as well as ultrasound-induced disassembly of the cages with release of their cargo, is presented in addition to their characterization by nuclear magnetic resonance (NMR) techniques, rheology, and comprehensive small-angle X-ray scattering (SAXS) experiments. The constrained geometries simulating external force (CoGEF) method and barriers using a force-modified potential energy surface (FMPES) suggest that the cage-opening mechanism starts with the dissociation of one pyridine ligand at around 0.5 nN. We show the efficient sonochemical activation of the hydrogels HG_{3 -6} , increasing the non-covalent guest-loading of completely unmodified drugs available for release by a factor of ten in comparison to non-crosslinked, star-shaped assemblies in solution.

Mechanochemically accessing a challenging-to-synthesize depolymerizable polymer

Polymers with low ceiling temperatures (T_c) are highly desirable as they can depolymerize under mild conditions, but they typically suffer from demanding synthetic conditions and poor stability. We envision that this challenge can be addressed by developing high-T_c polymers that can be converted into low-T_c polymers on demand. Here, we demonstrate the mechanochemical generation of a low-T_c polymer, poly(2,5-dihydrofuran) (PDHF), from an unsaturated polyether that contains cyclobutane-fused THF in each repeat unit. Upon mechanically induced cycloreversion of cyclobutane, each repeat unit generates three repeat units of PDHF. The resulting PDHF completely depolymerizes into 2,5-dihydrofuran in the presence of a ruthenium catalyst. The mechanochemical generation of the otherwise difficult-to-synthesize PDHF highlights the power of polymer mechanochemistry in accessing elusive structures. The concept of mechanochemically regulating the T_c of polymers can be applied to develop next-generation sustainable plastics.

Mechanical Force Enables an Anomalous Dual Ring-Opening Reaction of Naphthodipyran

Multimodal mechanophores that exhibit complex mechanochromic behavior beyond the typical binary response are capable of distinguishing between multiple stress states through discrete changes in color. Naphthodipyran photoswitches contain two pyran rings fused to a central naphthalene core and represent a potentially promising framework for multimodal reactivity. However, the concurrent ring opening of both pyran moieties has previously proven inaccessible via photochemical activation. Here, we demonstrate that mechanical force supplied to naphthodipyran through covalently linked polymer chains generates the elusive dual ring-opened dimerocyanine product with unique near-infrared absorption properties. Trapping with boron trifluoride renders the merocyanine dyes thermally persistent and reveals apparent sequential ring-opening behavior that departs from the reactivity of previously studied mechanophores under the high strain rates imposed by ultrasound-induced solvodynamic chain extension.