Practical and Modular Construction of C(sp3)-Rich Alkyl Boron Compounds

Ligand-Controlled Regioselective Dearomative Vicinal and Conjugate Hydroboration of Quinolines

A dearomative strategy to regioselectively modify arenes using a "diene" synthon within aromatic rings provides access to highly functionalized heterocycles from abundant aromatic feedstocks and represents an alternative synthetic approach besides traditional cross-coupling and C-H functionalization methodologies. In this study, we present an efficient method for selectively introducing boron onto quinolines through dearomative hydroboration using easily accessible and stable phosphine-ligated borane complexes. The vicinal 5,6- and conjugate 5,8-hydroborated products could be obtained regioselectively by modifying the phosphine ligand. Drawing inspiration from diverse organoboron transformations, these borane building blocks were diversified by a range of downstream functionalizations, providing modular pathways for the skeletal modifications of quinolines to access a variety of challenging functionalized heterocycles.

The Carbene Chemistry of N-Sulfonyl Hydrazones: The Past, Present, and Future

N-Sulfonyl hydrazones have been extensively used as operationally safe carbene precursors in modern organic synthesis due to their ready availability, facile functionalization, and environmental benignity. Over the past two decades, there has been tremendous progress in the carbene chemistry of N-sulfonyl hydrazones in the presence of transition metal catalysts, under metal-free conditions, or using photocatalysts under photoirradiation conditions. Many carbene transfer reactions of N-sulfonyl hydrazones are unique and cannot be achieved by any alternative methods. The discovery of novel N-sulfonyl hydrazones and the development of highly enantioselective new reactions and skeletal editing reactions represent the notable recent achievements in the carbene chemistry of N-sulfonyl hydrazones. This review describes the overall progress made in the carbene chemistry of N-sulfonyl hydrazones, organized based on reaction types, spotlighting the current state-of-the-art and remaining challenges to be addressed in the future. Special emphasis is devoted to identifying, describing, and comparing the scope and limitations of current methodologies, key mechanistic scenarios, and potential applications in the synthesis of complex molecules.

Access to Alkenyl Cyclobutanols by Ni-Catalyzed Regio- and Enantio-Selective syn-Hydrometalative 4-exo-trig Cyclization of Alkynones

Enantioselective synthesis of (spiro)cyclobutane derivatives poses significant challenges yet holds promising applications for both synthetic and medicinal chemistry. We report here a nickel-catalyzed asymmetric syn-hydrometalative 4-exo-trig cyclization of 1,4-alkynones to synthesize alkenyl cyclobutanols with a tetrasubstituted stereocenter. This strategy features a broad substrate scope, delivering a variety of trifluoromethyl-containing rigid (spiro)carbocycle skeletons in good yields with high enantioselectivities (up to 84 % yield and 98.5 : 1.5 er). The synthetic utility is demonstrated through stereospecific transformations into fused spiro molecules. Experimental and computational mechanistic studies indicate that the reaction is initiated by an active Ni-H species, with carbonyl-directed hydrometalation as the key for regioselective control. This catalytic method provides a general solution for regioselective hydrofunctionalization of alkynes and represents an efficient reaction pattern for assembling highly strained enantioenriched bioisosteres.

Synthesis of Carboxylic Acids Containing α-All-Carbon Quaternary Centers from Diazo Compounds and Trialkylboranes

The construction of C-C bonds to form all-carbon quaternary centers remains a significant challenge in synthetic chemistry. Herein, we report a tandem process involving a 1,2-migration of a tetra-coordinated boron intermediate followed by a Claisen rearrangement of the boron enolate, achieved through a reaction between allyl diazoacetates and trialkylboranes. The transformation forms two C-C bonds at the carbenic position of diazo substrate in a single-step operation under neutral conditions. Using this method, we successfully realized the gram-scale formal total synthesis of Vincamine, an indole alkaloid with significant pharmacological activity.

Isosteric 3D Bicyclo[1.1.1]Pentane (BCP) Core-Based Lipids for mRNA Delivery and CRISPR/Cas Gene Editing

Lipid nanoparticles (LNPs) are an essential component of messenger RNA (mRNA) vaccines and genome editing therapeutics. Ionizable amino lipids, which play the most crucial role in enabling mRNA to overcome delivery barriers, have, to date, been restricted to two-dimensional (2D) architectures. Inspired by improved physicochemical properties resulting from the incorporation of three-dimensionality (3D) into small-molecule drugs, we report the creation of 3D ionizable lipid designs through the introduction of bicyclo[1.1.1]pentane (BCP) core motifs. BCP-based lipids enabled efficient in vivo mRNA delivery to the liver and spleen with significantly greater performance over 2D benzene- and cyclohexane-based analogues. Notably, lead BCP-NC2-C12 LNPs mediated ∼90% reduction in the PCSK9 serum protein level via CRISPR/Cas9 gene knockout, outperforming 2D controls and clinically used DLin-MC3-DMA LNPs at the same dose. Here, we introduce BCP-based designs with superior in vivo activity, thereby expanding the chemical scope of ionizable amino lipids from 2D to 3D and offering a promising avenue to improve mRNA and gene editing efficiency for the continued development of genetic medicines.

Photochemical carboborylation and three-component difunctionalization of α,β-unsaturated ketones with boronic acids via tosylhydrazones

The reactions of cyclic α,β-unsaturated N-tosylhydrazones and alkylboronic acids promoted by 370-390 nm light in the presence of a base give rise to allylic boronic acids that can be trapped as the corresponding pinacolboronates by treatment with pinacol. This reaction features wide scope regarding both coupling partners and functional group tolerance, allowing for the incorporation of a variety of natural product-derived fragments. The allylic boronic acids can be also reacted in a one-pot process with aldehydes, to produce homoallylic alcohols with very high diastereoselectivity. A three-component one-pot procedure has been developed revealing that the methodology is a powerful tool for the generation of structural diversity that is accomplished by incorporation of an ample variety of each of the three elements. Moreover, from a synthetic perspective, in the reaction, the formation of two C-C bonds, at the carbonyl and the β positions of a α,β-unsaturated carbonyl, has been achieved in the three-component reaction.

Electrochemical stereoselective borylation of Morita-Baylis-Hillman adducts to functionalized allylic boronates

Herein, we disclose a highly efficient and facile electrochemical borylation of Morita-Baylis-Hillman adducts without using any metal catalyst. This methodology demonstrates excellent regio- and stereo-selectivity, leading to a wide range of functionalized E-allylic boronates, including derivatives of ibuprofen and menthol. Under mild and straightforward conditions, this redox-neutral reaction, combined with the scalability and synthetic applications of the allylic boronate esters, underscores its potential for a wide range of applications in organic synthesis.

The current utility and future potential of multiborylated alkanes

Organoboron chemistry has become a cornerstone of modern synthetic methodology. Most of these reactions use an organoboron starting material that contains just one C(sp2)-B or C(sp3)-B bond; however, there has been a recent and accelerating trend to prepare multiborylated alkanes that possess two or more C(sp3)-B bonds. This is despite a lack of general reactivity, meaning many of these compounds currently offer limited downstream synthetic value. This Review summarizes recent advances in the exploration of multiborylated alkanes, including a discussion on how these products may be elaborated in further synthetic manipulations.

Synthesis of Secondary Boronates via Deaminative Cross-Coupling of Alkyl Nitroso Carbamates and Boronic Acids

A strategy for transition metal-free cross-coupling of alkyl nitroso-carbamates and boronic acids is reported. The N-nitroso carbamates are easily prepared from the corresponding amine in two simple steps. This method allows for the synthesis of a wide variety of secondary boronates, benzylic boronates and formal Csp3-Csp2 cross-coupling products under operationally simple conditions. Functional group tolerance is also demonstrated and applied in the modification of lysine to make non-canonical amino acids.

A General Three-Component Alkyl Petasis Boron-Mannich Reaction

Aryl amines are one of the most common moieties in biologically active molecules, and approximately 37% of drug candidates contain aromatic amines. Recent advancements in medicinal chemistry, coined "escaping from flatland", have led to a greater focus on accessing highly functionalized C (sp3)-rich amines to improve the physicochemical and pharmacokinetic properties of compounds. This article presents a modular and operationally straightforward three-component alkyl Petasis boron-Mannich (APBM) reaction that utilizes ubiquitous starting materials, including amines, aldehydes, and alkyl boronates. By adaptation of this transformation to high-throughput experimentation (HTE), it offers rapid access to an array of diverse C(sp3)-rich complex amines, amenable for rapid identification of drug candidates.

Photoredox-Catalyzed Amino-Radical-Transfer-Mediated Three-Component Alkylarylation of Alkenes

We herein reported a novel photoredox-catalyzed three-component alkylarylation of vinyl arenes with alkylboronic pinacol esters (APEs) and cyanoarenes via radical addition/cross-coupling to construct 1,1-diarylalkanes. In this transformation, alkyl radicals were easily available by visible-light-induced oxidative N-H cleavage of morpholine, which used APEs as a radical precursor. Furthermore, this protocol exhibited a broad substrate scope, enabling various styrenes, APEs, and cyanoarenes, as well as bioactive molecule derivatives.

Three-dimensional saturated C(sp3)-rich bioisosteres for benzene

Benzenes, the most ubiquitous structural moiety in marketed small-molecule drugs, are frequently associated with poor 'drug-like' properties, including metabolic instability, and poor aqueous solubility. In an effort to overcome these limitations, recent developments in medicinal chemistry have demonstrated the improved physicochemical profiles of C(sp3)-rich bioisosteric scaffolds relative to arenes. In the past two decades, we have witnessed an exponential increase in synthetic methods for accessing saturated bioisosteres of monosubstituted and para-substituted benzenes. However, until recent discoveries, analogous three-dimensional ortho-substituted and meta-substituted biososteres have remained underexplored, owing to their ring strain and increased s-character hybridization. This Review summarizes the emerging synthetic methodologies to access such saturated motifs and their impact on the application of bioisosteres for ortho-substituted, meta-substituted and multi-substituted benzene rings. It concludes with a perspective on the development of next-generation bioisosteres, including those within novel chemical space.

Photoactivation of Hydrazones for the Synthesis of Diarylalkanes and Trialkylmethylboronates: The Key Role Played by Soluble Base

The synthesis of diaryl alkanes and tertiary organoboronates via Barluenga coupling at room temperature occurred via photoactivated conversion of aryl sulfonyl hydrazones to diazo compounds in the presence of soluble bases. The combination of arylsulfonyl hydrazone and a soluble base is necessary to provide a near-UV chromophore. Using aromatic hydrazones and aromatic boronic acids resulted in rapid deboronation because of the instability of dibenzylic boron intermediates. Alkyl hydrazones allowed the isolation of derivatives of the tertiary boronate.

Mechanism of Asymmetric Homologation of Alkenylboronic Acids with CF3-Diazomethane via Borotropic Rearrangement

Density functional theory calculations have been performed to investigate the mechanism for the BINOL-catalyzed asymmetric homologation of alkenylboronic acids with CF3-diazomethane. The reaction proceeds via a chiral BINOL ester of the alkenylboronic acid substrate. The calculations reveal a complex scenario for the formation of the chiral BINOL-alkenylboronate species, which is the key intermediate in the catalytic process. The aliphatic alcohol additive plays an important role in the reaction. This study provides a rationalization of the stereoinduction step of the reaction, and the enantioselectivity is mainly attributed to the steric repulsion between the CF3 group of the diazomethane reagent and the γ-substituent of the BINOL catalyst. The complex potential energy surface obtained by the calculations is analyzed by means of microkinetic simulations.

Light-induced arylation (alkylation) of N-sulfonylhydrazones with boronic acids

Di- and triarylmethanes are an important class of compounds in many fields. Here, we report an efficient light-induced arylation (alkylation) for the synthesis of diarylmethanes, bis(diarylmethyl)benzenes, arylalkylmethanes, and triarylmethanes from readily accessible N-sulfonylhydrazones and aryl/alkylboronic acids with the aid of Cs2CO3. In the presence of light, the synthesis of diarylmethanes was also achieved from aldehydes in a one-pot manner via a three-component approach in good yields. Furthermore, we have demonstrated the synthetic utility by synthesizing organoboron compounds and 2°-alcohol.

Metal-free photocatalytic cross-electrophile coupling enables C1 homologation and alkylation of carboxylic acids with aldehydes

In contemporary drug discovery, enhancing the sp3-hybridized character of molecular structures is paramount, necessitating innovative synthetic methods. Herein, we introduce a deoxygenative cross-electrophile coupling technique that pairs easily accessible carboxylic acid-derived redox-active esters with aldehyde sulfonyl hydrazones, employing Eosin Y as an organophotocatalyst under visible light irradiation. This approach serves as a versatile, metal-free C(sp3)-C(sp3) cross-coupling platform. We demonstrate its synthetic value as a safer, broadly applicable C1 homologation of carboxylic acids, offering an alternative to the traditional Arndt-Eistert reaction. Additionally, our method provides direct access to cyclic and acyclic β-arylethylamines using diverse aldehyde-derived sulfonyl hydrazones. Notably, the methodology proves to be compatible with the late-stage functionalization of peptides on solid-phase, streamlining the modification of intricate peptides without the need for exhaustive de-novo synthesis.

Terminal C(sp3)-H borylation through intermolecular radical sampling

Hydrogen atom transfer (HAT) processes can overcome the strong bond dissociation energies (BDEs) of inert C(sp3)-H bonds and thereby convert feedstock alkanes into value-added fine chemicals. Nevertheless, the high reactivity of HAT reagents, coupled with the small differences among various C(sp3)-H bond strengths, renders site-selective transformations of straight-chain alkanes a great challenge. Here, we present a photocatalytic intermolecular radical sampling process for the iron-catalyzed borylation of terminal C(sp3)-H bonds in substrates with small steric hindrance, including unbranched alkanes. Mechanistic investigations have revealed that the reaction proceeds through a reversible HAT process, followed by a selective borylation of carbon radicals. A boron-sulfoxide complex may contribute to the high terminal regioselectivity observed.

Programmable late-stage functionalization of bridge-substituted bicyclo[1.1.1]pentane bis-boronates

Modular functionalization enables versatile exploration of chemical space and has been broadly applied in structure-activity relationship (SAR) studies of aromatic scaffolds during drug discovery. Recently, the bicyclo[1.1.1]pentane (BCP) motif has increasingly received attention as a bioisosteric replacement of benzene rings due to its ability to improve the physicochemical properties of prospective drug candidates, but studying the SARs of C2-substituted BCPs has been heavily restricted by the need for multistep de novo synthesis of each analogue of interest. Here we report a programmable bis-functionalization strategy to enable late-stage sequential derivatization of BCP bis-boronates, opening up opportunities to explore the SARs of drug candidates possessing multisubstituted BCP motifs. Our approach capitalizes on the inherent chemoselectivity exhibited by BCP bis-boronates, enabling highly selective activation and functionalization of bridgehead (C3)-boronic pinacol esters (Bpin), leaving the C2-Bpin intact and primed for subsequent derivatization. These selective transformations of both BCP bridgehead (C3) and bridge (C2) positions enable access to C1,C2-disubstituted and C1,C2,C3-trisubstituted BCPs that encompass previously unexplored chemical space.

Synthesis of substituted benzylboronates by light promoted homologation of boronic acids with N-sulfonylhydrazones

The synthesis of benzylboronates by photochemical homologation of boronic acids with N-tosylhydrazones under basic conditions is described. The reaction involves the photolysis of the N-tosylhydrazone salt to give a diazoalkane followed by the geminal carboborylation of the diazoalkane. Under the mild reaction conditions, the protodeboronation of the unstable benzylboronic acid is circumvented and the pinacolboronates can be isolated after reaction of the benzylboronic acid with pinacol. The metholodogy has been applied to the reactions of alkylboronic acids with N-tosylhydrazones of aromatic aldehydes and ketones, and to the reactions of arylboronic acids with N-tosylhydrazones of aliphatic ketones. Moreover, the employment of the DBU/DIPEA bases combination allows for homogeneous reactions which have been adapted to photochemical continuous flow conditions. Additionally, the synthetic versatility of boronates enables their further transformation via Csp3-C or Csp3-X bond forming reactions converting this methodology into a novel method for the geminal difunctionalization of carbonyls via N-tosylhydrazones.

2-Oxabicyclo[2.2.2]octane as a new bioisostere of the phenyl ring

The phenyl ring is a basic structural element in chemistry. Here, we show the design, synthesis, and validation of its new saturated bioisostere with improved physicochemical properties - 2-oxabicyclo[2.2.2]octane. The design of the structure is based on the analysis of the advantages and disadvantages of the previously used bioisosteres: bicyclo[1.1.1]pentane, bicyclo[2.2.2]octane, and cubane. The key synthesis step is the iodocyclization of cyclohexane-containing alkenyl alcohols with molecular iodine in acetonitrile. 2-Oxabicyclo[2.2.2]octane core is incorporated into the structure of Imatinib and Vorinostat (SAHA) drugs instead of the phenyl ring. In Imatinib, such replacement leads to improvement of physicochemical properties: increased water solubility, enhanced metabolic stability, and reduced lipophilicity. In Vorinostat, such replacement results in a new bioactive analog of the drug. This study enhances the repertoire of available saturated bioisosteres of (hetero)aromatic rings for the use in drug discovery projects.

Programmable Amine Synthesis via Iterative Boron Homologation

The value of Matteson-type reactions has been increasingly recognized for developing automated organic synthesis. However, the typical Matteson reactions almost exclusively focus on homologation of carbon units. Here, we report the detailed development of sequential insertion of nitrogen and carbon atoms into boronate C-B bonds, which provides a modular and iterative approach to access functionalized tertiary amines. A new class of nitrenoid reagents is uncovered to allow direct formation of aminoboranes from aryl or alkyl boronates via N-insertion. The one-pot N-insertion followed by controlled mono- or double-carbenoid insertion has been realized with widely available aryl boronates. The resulting aminoalkyl boronate products can undergo further homologation and various other transformations. Preliminary success on homologation of N,N-dialkylaminoboranes and sequential N- and C-insertions with alkyl boronates have also been achieved. To broaden the synthetic utility, selective removal of a benzyl or aryl substituent permits access to secondary or primary amine products. The application of this method has been demonstrated in the modular synthesis of bioactive compounds and the programmable construction of diamines and aminoethers. A plausible reaction mechanism, supported by preliminary NMR (nuclear magnetic resonance) and computational studies, is also proposed.

Base-Modulated 1,3-Regio- and Stereoselective Carboboration of Cyclohexenes

While chain-walking stimulates wide interest in both polymerization and organic synthesis, site- and stereoselective control of chain-walking on rings is still a challenging task in the realm of organometallic catalysis. Inspired by a controllable chain-walking on cyclohexane rings in olefin polymerization, we have developed a set of chain-walking carboborations of cyclohexenes based on nickel catalysis. Different from the 1,4-trans-selectivity disclosed in polymer science, a high level of 1,3-regio- and cis-stereoselectivity is obtained in our reactions. Mechanistically, we discovery that the base affects the reduction ability of B2 pin2 and different bases lead to different catalytic cycles and different regioselective products (1,2- Vs 1,3-addition). This study provides a concise and modular method for the synthesis of 1,3-disubstituted cyclohexylboron compounds. The incorporation of a readily modifiable boronate group greatly enhances the value of this method, the synthetic potential of which was highlighted by the synthesis of a series of high-valued commercial chemicals and pharmaceutically interesting molecules.

2-Oxabicyclo[2.1.1]hexanes as saturated bioisosteres of the ortho-substituted phenyl ring

The ortho-substituted phenyl ring is a basic structural element in chemistry. It is found in more than three hundred drugs and agrochemicals. During the past decade, scientists have tried to replace the phenyl ring in bioactive compounds with saturated bioisosteres to obtain novel patentable structures. However, most of the research in this area has been devoted to the replacement of the para-substituted phenyl ring. Here we have developed saturated bioisosteres of the ortho-substituted phenyl ring with improved physicochemical properties: 2-oxabicyclo[2.1.1]hexanes. Crystallographic analysis revealed that these structures and the ortho-substituted phenyl ring indeed have similar geometric properties. Replacement of the phenyl ring in marketed agrochemicals fluxapyroxad (BASF) and boscalid (BASF) with 2-oxabicyclo[2.1.1]hexanes dramatically improved their water solubility, reduced lipophilicity and most importantly retained bioactivity. This work suggests an opportunity for chemists to replace the ortho-substituted phenyl ring in bioactive compounds with saturated bioisosteres in medicinal chemistry and agrochemistry.

Catalytic undirected borylation of tertiary C-H bonds in bicyclo[1.1.1]pentanes and bicyclo[2.1.1]hexanes

Catalytic borylations of sp3 C-H bonds occur with high selectivities for primary C-H bonds or secondary C-H bonds that are activated by nearby electron-withdrawing substituents. Catalytic borylation at tertiary C-H bonds has not been observed. Here we describe a broadly applicable method for the synthesis of boron-substituted bicyclo[1.1.1]pentanes and (hetero)bicyclo[2.1.1]hexanes by an iridium-catalysed borylation of the bridgehead tertiary C-H bond. This reaction is highly selective for the formation of bridgehead boronic esters and is compatible with a broad range of functional groups (>35 examples). The method is applicable to the late-stage modification of pharmaceuticals containing this substructure and the synthesis of novel bicyclic building blocks. Kinetic and computational studies suggest that C-H bond cleavage occurs with a modest barrier and that the turnover-limiting step of this reaction is an isomerization that occurs prior to reductive elimination that forms the C-B bond.

Modular Synthesis of (Borylmethyl)silanes through Orthogonal Functionalization of a Carbon Atom

(Borylmethyl)trimethylsilanes are important building blocks in organic synthesis displaying a unique reactivity. Yet, the synthesis of more advanced derivatives is limited by the advanced silicon intermediates required for their preparation. Herein, a one-pot synthesis of (borylmethyl)silanes is developed, sourced on available alkyl-, aryl-, alkoxy-, aryloxy-, and silyl-hydrosilane materials. The privileged reactivity of N-hydroxyphthalimidyl diazoacetate (NHPI-DA) in Si-H insertion and α-silyl redox-active esters in different decarboxylative borylation reactions are scrutinized.

Selective Formal Carbene Insertion into Carbon-Boron Bonds of Diboronates by N-Trisylhydrazones

Bisborylalkanes play important roles in organic synthesis as versatile bifunctional reagents. The two boron moieties in these compounds can be selectively converted into other functional groups through cross-coupling, oxidation or radical reactions. Thus, the development of efficient methods for synthesizing bisborylalkanes is highly demanded. Herein we report a new strategy to access bisborylalkanes through the reaction of N-trisylhydrazones with diboronate, in which the bis(boryl) methane is transformed into 1,2-bis(boronates) via formal carbene insertion. Since the N-trisylhydrazones can be readily derived from the corresponding aldehydes, this strategy represents a practical synthesis of 1,2-diboronates with broad substrate scope. Mechanistic studies reveal an unusual neighboring group effect of 1,1-bis(boronates), which accounts for the observed regioselectivity when unsymmetric 1,1-diboronates are applied.

Transition-Metal-Free Multicomponent Approach to the Regioselective Synthesis of Highly Substituted N-Alkylpyrazoles

An efficient transition-metal-free multicomponent approach to the regioselective synthesis of highly substituted N-alkylpyrazoles through 1,6-addition of pyrazole (in situ generated from α,β-unsaturated aldehyde and hydrazide) to para-Quinone Methides has been developed. The N-alkylpyrazole containing triarylmethanes having several heteroaryl rings (quinoline, pyridine, thiophene) at the central methine carbon atom was developed. This chemical process may be used for large-scale synthesis and provides a novel way to produce triarylmethanes with diverse functional groups.

Synthesis of gem-Diboromethyl-Substituted Bicyclo[1.1.1]pentanes and Their Application in Palladium-Catalyzed Cross Couplings

We describe the first general transition-metal-free synthesis of gem-diboromethyl-substituted bicyclo[1.1.1]pentane (BCP) and other related C(sp³)-rich carbocyclic benzene bioisosteres from their corresponding p-tosylhydrazones. These novel functionalized benzene bioisosteres demonstrated unique reactivities toward palladium-catalyzed C(sp²)-C(sp³) cross couplings. The overall transformation can be applied to relatively complex substrates with potential utility in drug discovery.

Photocatalytic Alkylation of C(sp3 )-H Bonds Using Sulfonylhydrazones

The ability to construct C(sp³ )-C(sp³ ) bonds from easily accessible reagents is a crucial, yet challenging endeavor for synthetic organic chemists. Herein, we report the realization of such a cross-coupling reaction, which combines N-sulfonyl hydrazones and C(sp³ )-H donors through a diarylketone-enabled photocatalytic hydrogen atom transfer and a subsequent fragmentation of the obtained alkylated hydrazide. This mild and metal-free protocol was employed to prepare a wide array of alkyl-alkyl cross-coupled products and is tolerant of a variety of functional groups. The application of this chemistry further provides a preparatively useful route to various medicinally-relevant compounds, such as homobenzylic ethers, aryl ethyl amines, β-amino acids and other moieties which are commonly encountered in approved pharmaceuticals, agrochemicals and natural products.

One step synthesis of unsymmetrical 1,3-disubstituted BCP ketones via nickel/photoredox-catalyzed [1.1.1]propellane multicomponent dicarbofunctionalization

Bicyclo[1.1.1]pentanes (BCPs), utilized as sp3-rich bioisosteres for tert-butyl- and aryl groups as well as internal alkynes, have gained considerable momentum in drug development programs. Although many elegant methods have been developed to access BCP amines and BCP aryls efficiently, the methods used to construct BCP ketones directly are relatively underdeveloped. In particular, the preparation of unsymmetrical 1,3-disubstituted-BCP ketones remains challenging and still requires multiple chemical steps. Herein, a single-step, multi-component approach to versatile disubstituted BCP ketones via nickel/photoredox catalysis is reported. Importantly, installing a boron group at the carbon position adjacent to the BCP structure bypasses the limitation to tertiary BF3K coupling partners, thus expanding the scope of this paradigm. Further transformation of disubstituted-BCP ketones into a variety of other BCP derivatives demonstrates the synthetic value of this developed method.

Exploiting the sp2 character of bicyclo[1.1.1]pentyl radicals in the transition-metal-free multi-component difunctionalization of [1.1.1]propellane

Strained bicyclic substructures are increasingly relevant in medicinal chemistry discovery research because of their role as bioisosteres. Over the last decade, the successful use of bicyclo[1.1.1]pentane (BCP) as a para-disubstituted benzene replacement has made it a highly valuable pharmacophore. However, various challenges, including limited and lengthy access to useful BCP building blocks, are hampering early discovery research. Here we report a single-step transition-metal-free multi-component approach to synthetically versatile BCP boronates. Radicals derived from commonly available carboxylic acids and organohalides perform additions onto [1.1.1]propellane to afford BCP radicals, which then engage in polarity-matched borylation. A wide array of alkyl-, aryl- and alkenyl-functionalized BCP boronates were easily prepared. Late-stage functionalization performed on natural products and approved drugs proceeded with good efficiency to generate the corresponding BCP conjugates. Various photoredox transformations forging C-C and C-N bonds were demonstrated by taking advantage of BCP trifluoroborate salts derived from the BCP boronates.

Dicarbofunctionalization of [1.1.1]Propellane Enabled by Nickel/Photoredox Dual Catalysis: One-Step Multicomponent Strategy for the Synthesis of BCP-Aryl Derivatives

Bicyclo[1.1.1]pentane (BCP) motifs as para-disubstituted aryl bioisosteres are playing an emerging role in pharmaceutical, agrochemical, and materials chemistry. The vast majority of these structures is obtained from a BCP electrophile or nucleophile, which are themselves derived from [1.1.1]propellane via cleavage of the internal C-C bond through the addition of either radicals or metal-based nucleophiles. Compared with the current stepwise approaches, a multicomponent reaction that provides direct access to complex and diverse disubstituted BCP products would be more attractive. Herein, we report a single-step, multicomponent approach to synthetically versatile arylated BCP products via nickel/photoredox catalysis. Importantly, this three-component process allows two C-C bonds to be formed in a single step and sets three quaternary centers, unprecedented in any previously reported methods. The method has been demonstrated to allow access to complex BCP architectures from aryl halide and radical precursor substrates.

ART─An Amino Radical Transfer Strategy for C(sp2)-C(sp3) Coupling Reactions, Enabled by Dual Photo/Nickel Catalysis

Introducing the novel concept of amino radical transfer (ART) enables the use of easily accessible and commercially available alkyl boronic esters as cross-coupling partners for aryl halides in dual photoredox/nickel catalysis mediated by visible light. Activation of otherwise photochemically innocent boronic esters by radicals generated from primary or secondary alkylamines gives rise to an outstanding functional group tolerance in a mild, fast, and air-stable reaction. As shown in more than 50 examples including unprotected alcohols, amines, and carboxylic acids, this reaction allows quick access to relevant scaffolds for organic synthesis and medicinal chemistry. In comparison with existing methods for C(sp²)-C(sp³) couplings an extraordinary generality could be realized via the ART concept, employing a single set of optimized reaction conditions. Due to its selectivity, the transformation can also be used for late-stage functionalization, as demonstrated with three exemplary syntheses of drug molecules. Furthermore, the successful one-to-one scalability of this reaction up to gram scale without the necessity of any further precautions or flow systems is demonstrated.

A Unified Synthetic Strategy to Introduce Heteroatoms via Electrochemical Functionalization of Alkyl Organoboron Reagents

Based on systematic electrochemical analysis, an integrated synthetic platform of C(sp³)-based organoboron compounds was established for the introduction of heteroatoms. The electrochemically mediated bond-forming strategy was shown to be highly effective for the functionalization of sp³-hybridized carbon atoms with significant steric hindrance. Moreover, virtually all the nonmetallic heteroatoms could be utilized as reaction partners using one unified protocol. The observed reactivity stems from the two consecutive single-electron oxidations of the substrate, which eventually generates an extremely reactive carbocation as the key intermediate. The detailed reaction profile could be elucidated through multifaceted electrochemical studies. Ultimately, a new dimension in the activation strategies for organoboron compounds was accomplished through the electrochemically driven reaction development.

Uncommon carbene insertion reactions

Transition-metal-catalysed carbene insertion reaction is a straightforward and efficient protocol for the construction of carbon–carbon or carbon–heteroatom bonds. Compared to the intensively studied and well-established “common” carbene insertion reactions, including carbene insertion into C–H, Si–H, N–H, O–H, and S–H bonds, several “uncommon” carbene insertion reactions, including carbene insertion into B–H, Sn–H, Ge–H, P–H, F–H, C–C, and M–M bonds, have been neglected for a long time. However, more and more studies on uncommon carbene insertion reactions have been disclosed recently, and clearly demonstrate the great synthetic potential of these reactions. The current perspective reviews the history and the newest advances of uncommon carbene insertion reactions, discusses their potential applications and challenges, and also presents an outlook of this promising field.

Transition-metal-catalysed carbene insertion reaction is a straightforward and efficient protocol for the construction of carbon–carbon or carbon–heteroatom bonds.

Divergent, C-C Bond Forming Macrocyclizations Using Modular Sulfonylhydrazone and Derived Substrates

A divergent approach to C-C bond forming macrocycle construction is described. Modular sulfonylhydrazone and derived pyridotriazole substrates with three key building blocks have been constructed and cyclized to afford diverse macrocyclic frameworks. Broad substrate scope and functional group tolerance have been demonstrated. In addition, site-selective postfunctionalization allowed for further diversification of macrocyclic cores.

Catechol Moiety Integrated Tri-Aryl Type AIEgen for Visual and Quantitative Boronic Acid Detection

Novel functional AIEgen based on three compact bound aryl skeletons is designed and synthesized. This tri-aryl type luminogen (TA-Catechol) embedded with catechol moiety responds rapidly to series of boronic acids. Real-time visual and quantitative dual-mode detection method is established for the first time with modest precision and low detection limit (8.0 μM). Detailed mechanistic discussion identifies tetra-coordinated boronic species as the key intermediate within sensing procedure. Wide range of organic boronic acids compatible with this strategy is displayed which is promising in high throughput screening technology. Furthermore, solid-state sensing capability of TA-Catechol is also demonstrated.

Saturated Boronic Acids, Boronates, and Trifluoroborates: An Update on Their Synthetic and Medicinal Chemistry

This review discusses recent advances in the chemistry of saturated boronic acids, boronates, and trifluoroborates. Applications of the title compounds in the design of boron-containing drugs are surveyed, with special emphasis on α-amino boronic derivatives. A general overview of saturated boronic compounds as modern tools to construct C(sp³ )-C and C(sp³ )-heteroatom bonds is given, including recent developments in the Suzuki-Miyaura and Chan-Lam cross-couplings, single-electron-transfer processes including metallo- and organocatalytic photoredox reactions, and transformations of boron "ate" complexes. Finally, an attempt to summarize the current state of the art in the synthesis of saturated boronic acids, boronates, and trifluoroborates is made, with a brief mention of the "classical" methods (transmetallation of organolithium/magnesium reagents with boron species, anti-Markovnikov hydroboration of alkenes, and the modification of alkenyl boron compounds) and a special focus on recent methodologies (boronation of alkyl (pseudo)halides, derivatives of carboxylic acids, alcohols, and primary amines, boronative C-H activation, novel approaches to alkene hydroboration, and 1,2-metallate-type rearrangements).

Construction of NH-Unprotected Spiropyrrolidines and Spiroisoindolines by [4+1] Cyclizations of γ-Azidoboronic Acids with Cyclic N-Sulfonylhydrazones

The reactions of N‐sulfonylhydrazones derived from cyclic ketones with γ‐azidopropylboronic acid and 2‐(azidomethyl)phenylboronic acid give rise to spirocyclic pyrrolidines and spiroisoindolines, respectively. The reactions proceed without the need of any transition‐metal catalyst through a domino process that comprises the formation of a Csp³‐C and a Csp³‐N bond of the former hydrazonic carbon. The scope of the reaction has been explored by the preparation of over 50 examples of NH‐unprotected spirocyclic derivatives. Importantly, this methodology could be applied for the preparation of alkaloid steroids from steroid N‐tosylhydrazones.

Regioselective Cross-Coupling of Isatogens with Boronic Acids to Construct 2,2-Disubstituted Indolin-3-one Derivatives

Herein we present a transition-metal-free cross-coupling reaction of isatogens with boronic acids through a 1,4-metalate shift of a boron "ate" complex. This coupling reaction provides a feasible method to deliver valuable 2,2-disubstituted indolin-3-one derivatives with excellent regioselectivity, which exhibit operational simplicity, good functional group tolerance, and a broad substrate scope.

An intramolecular coupling approach to alkyl bioisosteres for the synthesis of multisubstituted bicycloalkyl boronates

Bicyclic hydrocarbons, and bicyclo[1.1.1]pentanes (BCPs) in particular, are playing an emerging role as saturated bioisosteres in pharmaceutical, agrochemical and materials chemistry. Taking advantage of strain-release strategies, prior synthetic studies have featured the synthesis of bridgehead-substituted (C1, C3) BCPs from [1.1.1]propellane. Here, we describe an approach to access multisubstituted BCPs via intramolecular cyclization. In addition to C1,C3-disubstituted BCPs, this method also enables the construction of underexplored multisubstituted (C1, C2 and C3) BCPs from readily accessible cyclobutanones. The broad generality of this method has also been examined through the synthesis of a variety of other caged bicyclic molecules, ranging from [2.1.1] to [3.2.1] scaffolds. The modularity afforded by the pendant bridgehead boron pinacol esters generated during the cyclization reaction has been demonstrated through several downstream functionalizations, highlighting the ability of this approach to enable the programmed and divergent synthesis of multisubstituted bicyclic hydrocarbons.

Aza-Matteson Reactions via Controlled Mono- and Double-Methylene Insertions into Nitrogen-Boron Bonds

Boron-homologation reactions represent an efficient and programmable approach to prepare alkylboronates, which are valuable and versatile synthetic intermediates. The typical boron-homologation reaction, also known as the Matteson reaction, involves formal carbenoid insertions into C-B bonds. Here we report the development of aza-Matteson reactions via carbenoid insertions into the N-B bonds of aminoboranes. By changing the leaving groups of the carbenoids and altering Lewis acid activators, selective mono- and double-methylene insertions can be realized to access various α- and β-boron-substituted tertiary amines, respectively, from common secondary amines. The derivatization of complex amine-containing bioactive molecules, diverse functionalization of the boronate products, and sequential insertions of different carbenoids have also been achieved.