A Two-Dimensional Metallacycle Cross-Linked Switchable Polymer for Fast and Highly Efficient Phosphorylated Peptide Enrichment

Enzymatically Covalent and Noncovalent Weaving toward Highly Efficient Synthesis of 2D Monolayered Molecular Fabrics

Molecular fabrics with fascinating physical characteristics, such as structural flexibility and single-layered thinness, have attracted much attention. Chemists worldwide have been working on building unique molecularly woven structures in two dimensions. However, the synthesis of two-dimensional molecular weaving remains a challenging task, especially in water. Herein, we propose a straightforward and practical method to construct 2D molecular fabrics by enzymatically covalent and noncovalent syntheses in water. In particular, aromatic helical pentamers with two-terminal tyrosine residues (Penta-Tyr) can spontaneously dimerize via π-π interactions into double-helical interlocking structure, and the two-terminal tyrosine moieties of Penta-Tyr can undergo oxidative polymerization catalyzed by horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) for effective covalent cross-linking. The 2D monolayered molecular fabrics can be readily prepared by the catalysis of HRP and H2O2 under mild conditions, which exhibit concentration-dependent weaving behavior. This work not only demonstrates an enzyme-catalyzed approach for the highly efficient synthesis of 2D monolayered molecular fabrics for the first time but also will promote the controllable preparation and application of water-soluble 2D molecular fabrics.

Profiling the differential phosphoproteome between breast milk and infant formula through a titanium (IV)-immobilized magnetic nanoplatform

Breast milk (BM) fulfills the nutritional needs of infants and sets the standard for infant formula (IF). However, profiling the differential phosphoproteome between BM and IF remains unclear. Herein, a titanium (IV) (Ti4+)-immobilized magnetic nanoplatform (Fe3O4@GO@PDA-Ti4+) was constructed by self-assembly polymerization of dopamine on magnetic graphene oxide, followed by immobilizing Ti4+ through chelation for phosphopeptide enrichment. Fe3O4@GO@PDA-Ti4+ possessed outstanding selectivity (1/1000, a molar ratio of β-casein digests to bovine serum albumin digests) and favorable sensitivity (2.5 fmol/μL), along with rapid magnetic separation. Excellent phosphopeptide capture efficiencies were obtained for BM and IF using Fe3O4@GO@PDA-Ti4+ as an adsorbent coupled with liquid chromatography-mass spectrometry/mass spectrometry. There were 191 and 239 phosphopeptides found in BM and IF, respectively, with 36 phosphoproteins identified in both. However, BM and IF shared only 17 phosphopeptides and 4 phosphoproteins. The variation in the phosphoproteome between BM and IF provides valuable insights into the optimization of IF humanization.

Ordered Photoexfoliation for Polypseudorotaxane Nanosheets

Two-dimensional layered structural materials exhibit a wide range of properties due to their ultrahigh specific surface area. However, achieving ordered exfoliation to obtain uniform two-dimensional structures remains challenging. In this study, we developed a supramolecular system by covalently bonding hexathiobenzene (HB) into β-cyclodextrin to create a light-responsive moiety, followed by coassembly with bipyridine and nickel ions to form a polypseudorotaxane (PR) system, which enables an in situ light-induced exfoliation strategy for two-dimensional materials. By further introducing an appropriate ratio of ethanol and applying in situ light irradiation, the gradual evaporation of the solvent ultimately led to the uniform formation of bilayer PR two-dimensional materials. This strategy provides a novel and effective approach for the preparation of two-dimensional layered structural materials from the light perspective.

A Crystalline 3D Supramolecular Polymer Constructed by Clamparene-Based Controllable Self-Assembly and Its Application in Photothermal Conversion

The development of well-defined three-dimensional supramolecular polymers presents significant challenges, particularly in achieving crystalline state structures. This study addresses this challenge by presenting the construction of a crystalline three-dimensional supramolecular polymer through the self-assembly of clamparene (CLP) and a naphthalene diimide derivative (NDIOH) in the solid state. The hierarchical self-assembly progresses from one-dimensional linear supramolecular polymers to two-dimensional supramolecular polymers and ultimately to a crystalline three-dimensional supramolecular polymer. Moreover, the prepared crystalline three-dimensional supramolecular polymer demonstrates effective photothermal conversion. This work advances the understanding and design of functional three-dimensional supramolecular polymers in the crystalline state.

Metal-Coordinated Polymer-Inorganic Hybrids: Synthesis, Properties, and Application

This review examines the recent advancements and unique properties of polymer-inorganic hybrid materials formed through coordination bonding (Class II hybrids), which enable enhanced functionality and stability across various applications. Here, we categorize these materials based on properties gained through complexation, focusing on electrical conductivity, thermal stability, photophysical characteristics, catalytic activity, and nanoscale self-assembly. Two major synthetic approaches to making these hybrids include homogeneous and heterogeneous methods, each with distinct tradeoffs: Homogeneous synthesis is straightforward but requires favorable mixing between inorganic and polymer species, which are predominantly water-soluble complexes. In contrast, heterogeneous methods are post-processing techniques that provide high area selectivity for inorganic precursors, allowing precise integration within polymer matrices. Finally, we highlight the role of hybrid linkers, namely metallosupramolecular polymers, in creating structural diversity. These can be organized into three main groups: metal-organic frameworks (MOFs), coordination polymers (CPs), and supramolecular coordination complexes (SCCs). Each of these groups introduces unique structural and functional properties that expand the potential applications of hybrid materials.

Polymeric functionalization of mesoporous silica nanoparticles: Biomedical insights

Mesoporous silica nanoparticles (MSNs) endowed with polymer coatings present a versatile platform, offering notable advantages such as targeted, pH-controlled, and stimuli-responsive drug delivery. Surface functionalization, particularly through amine and carboxyl modification, enhances their suitability for polymerization, thereby augmenting their versatility and applicability. This review delves into the diverse therapeutic realms benefiting from polymer-coated MSNs, including photodynamic therapy (PDT), photothermal therapy (PTT), chemotherapy, RNA delivery, wound healing, tissue engineering, food packaging, and neurodegenerative disorder treatment. The multifaceted potential of polymer-coated MSNs underscores their significance as a focal point for future research endeavors and clinical applications. A comprehensive analysis of various polymers and biopolymers, such as polydopamine, chitosan, polyethylene glycol, polycaprolactone, alginate, gelatin, albumin, and others, is conducted to elucidate their advantages, benefits, and utilization across biomedical disciplines. Furthermore, this review extends its scope beyond polymerization and biomedical applications to encompass topics such as surface functionalization, chemical modification of MSNs, recent patents in the MSN domain, and the toxicity associated with MSN polymerization. Additionally, a brief discourse on green polymers is also included in review, highlighting their potential for fostering a sustainable future.

[Progress in enrichment methods for protein N-phosphorylation]

Protein phosphorylation is one of the most common and important post-translational modifications that regulates almost all life processes. In particular, protein phosphorylation regulates the development of major diseases such as tumors, neurodegenerative diseases, and diabetes. For example, excessive phosphorylation of Tau protein can cause neurofibrillary tangles, leading to Alzheimer's disease. Therefore, large-scale methods for identifying protein phosphorylation must be developed. Rapid developmentin efficient enrichment methods and biological mass spectrometry technologies have enabled the large-scale identification of low-abundance protein O-phosphorylation modifications in, allowing for a more thorough study of their biological functions. The N-phosphorylation modifications that occur on the side-chain amino groups of histidine, arginine, and lysine have recently received increased attention. For example, the biological function of histidine phosphorylation in prokaryotes has been well studied; this type of modification regulates signal transduction and sugar metabolism. Two mammalian pHis kinases (NME1 and NME2) and three pHis phosphatases (PHPT1, LHPP, and PGAM5) have been successfully identified using various biological methods. N-Phosphorylation is involved in multiple biological processes, and its functions cannot be ignored. However, N-phosphorylation is unstable under acidic and thermal conditions owing to the poor chemical stability of the P-N bond. Unfortunately, the current O-phosphorylation enrichment method, which relies on acidic conditions, is unsuitable for N-phosphorylation enrichment, resulting in a serious lag in the large-scale identification of protein N-phosphorylation. The lack of enrichment methods has also seriously hindered studies on the biological functions of N-phosphorylation. Therefore, the development of efficient enrichment methods that target protein N-phosphorylation is an urgent undertaking. Research on N-phosphorylation proteome enrichment methods is limited, hindering functional research. Thus, summarizing such methods is necessary to promote further functional research. This article introduces the structural characteristics and reported biological functions of protein N-phosphorylation, reviews the protein N-phosphorylation modification enrichment methods developed over the past two decades, and analyzes the advantages and disadvantages of each method. In this study, both antibody-based and nonantibody-dependent methods are described in detail. Owing to the stability of the molecular structure of histidine, the antibody method is currently limited to histidine phosphorylation enrichment research. Future studies will focus on the development of new enrichment ligands. Moreover, research on ligands will promote studies on other nonconventional phosphorylation targets, such as two acyl-phosphates (pAsp, pGlu) and S-phosphate (pCys). In summary, this review provides a detailed analysis of the history and development directions of N-phosphorylation enrichment methods.

An amino-rich polymer-coated magnetic nanomaterial for ultra-rapid separation of phosphorylated peptides in the serum of Parkinson's disease patients

The elucidation of disease pathogenesis can be achieved by analyzing the low-abundance phosphopeptides in organisms. Herein, we developed a novel and easy-to-prepare polymer-coated nanomaterial. By improving the hydrophilicity and spatial conformation of the material, we effectively enhanced the adsorption of phosphopeptides and demonstrated excellent enrichment properties. The material was able to successfully enrich the phosphopeptides in only 1 min. Meanwhile, the material has high selectivity (1:2000), good loading capacity (100 μg/mg), excellent sensitivity (0.5 fmol), and great acid and alkali resistance. In addition, the material was applied to real samples, and 70 phosphopeptides were enriched from the serum of Parkinson's disease (PD) patients and 67 phosphopeptides were enriched from the serum of normal controls. Sequences Logo showed that PD is probably associated with threonine, glutamate, serine, and glutamine. Finally, gene ontology (GO) analysis was performed on phosphopeptides enriched in PD patients' serum. The results showed that PD patients expressed abnormal expression of the cholesterol metabolic process and cell-matrix adhesion in the biological process (BP), endoplasmic reticulum and lipoprotein in the cellular component (CC), and heparin-binding, lipid-binding, and receptor-binding in the molecular function (MF) as compared with normal individuals. All the experiments indicate that the nanomaterials have great potential in proteomics studies.

De Novo Designed Ru(II) Metallacycle as a Microenvironment-Adaptive Sonosensitizer and Sonocatalyst for Multidrug-Resistant Biofilms Eradication

Albeit sonodynamic therapy (SDT) has achieved encouraging progress in microbial sterilization, the scarcity of guidelines for designing highly effective sonosensitizers and the intricate biofilm microenvironment (BME), substantially hamper the therapeutic efficacy against biofilm infections. To address the bottlenecks, we innovatively design a Ru(II) metallacycle-based sonosensitizer/sonocatalyst (named Ru-A3-TTD) to enhance the potency of sonotherapy by employing molecular engineering strategies tailored to BME. Our approach involves augmenting Ru-A3-TTD's production of ultrasonic-triggered reactive oxygen species (ROS), surpassing the performance of commercial sonosensitizers, through a straightforward but potent π-expansion approach. Within the BME, Ru-A3-TTD synergistically amplifies sonotherapeutic efficacy via triple-modulated approaches: (i) effective alleviation of hypoxia, leading to increased ROS generation, (ii) disruption of the antioxidant defense system, which shields ROS from glutathione consumption, and (iii) enhanced biofilm penetration, enabling ROS production in deep sites. Notably, Ru-A3-TTD sono-catalytically oxidizes NADPH, a critical coenzyme involved in antioxidant defenses. Consequently, Ru-A3-TTD demonstrates superior biofilm eradication potency against multidrug-resistant Escherichia coli compared to conventional clinical antibiotics, both in vitro and in vivo. To our knowledge, this study represents the pioneering instance of a supramolecular sonosensitizer/sonocatalyst. It provides valuable insights into the structure-activity relationship of sonosensitizers and paves a promising pathway for the treatment of biofilm infections.

Double Cation-π Directed Two-Dimensional Metallacycle-Based Hierarchical Self-Assemblies for Dual-Mode Catalysis

Hierarchical self-assembly of Pt(II) metallacycles for the construction of functional materials has received considerable research interest, owing to their potential to meet increasing complexity and functionality demands while being based on well-defined scaffolds. However, the fabrication of long-range-ordered Pt(II) metallacycle-based two-dimensional hierarchical self-assemblies (2D HSAs) remains a challenge, primarily because of the limitations of conventional orthogonal noncovalent interaction (NCI) motifs and the intrinsic characteristics of Pt(II) metallacycles, making the delicate self-assembly processes difficult to control. Herein, we prepare well-regulated Pt(II)-metallacycle-based 2D HSAs through a directed strategy involving double cation-π interactions derived from C3-symmetric hexagonal Pt(II) metallacycles and C2-symmetric sodium phenate monomers. Spatially confined arrays of planar Pt(II) metallacycles and the selective growth of self-assemblies at desired locations are achieved by employing strong cation-π driving forces with well-defined directionality as the second orthogonal NCI, realizing the bottom-up, three-stage construction of Pt(II)-metallacycle-based 2D HSAs. The resultant 2D HSAs are applied as dual-mode catalysis platforms, which are loaded with two different nanocatalysts, one promoting catalytic oxidation and the other promoting photocatalytic reduction.

N-Embedded Cubarene: A Quadrangular Member of the Macrocycle Family

Despite the large number of synthetic macrocycles, the cubarenes, the quadrangular-shaped macrocyclic arenes, remain less investigated, possibly due either to synthetic challenges or to the lack of suitable building blocks. In this paper, a N-embedded cubarene (cub[4]indolocarbazole) is facilely synthesized by FeCl₃·6H₂O-catalyzed cyclization in dichloromethane. The endo cavity of cub[4]indolocarbazole can bury quaternary ammonium salts in an intramolecular manner, whereas the intermolecular interaction between its exo walls with Cu²⁺ generates two-dimensional supramolecular tessellation.

Three-Dimensional MAX-Ti3 AlC2 Nanomaterials for Dual-Selective and Highly Efficient Enrichment of Phosphorylated and Glycosylated Peptides

Dual-selective enrichment of phosphopeptides and glycopeptides of post-translational modifications (PTMs) in the complex biological samples are challenging. In this work, considering the versatile properties including surface abundant metal sites and electrostatic attraction between Ti₃ C₂ -layers and Al-layers, layered ternary carbides Ti₃ AlC₂ nanomaterials was successfully applied for the first time as an affinity adsorbent for the dual-selective capture of phosphopeptides and glycopeptides. Especially, the Ti₃ AlC₂ nanomaterials had an excellent detection sensitivity for phosphopeptides (1×10^-11  M) and a good selectivity for glycopeptides with a low molar ratio of 1 : 500 of HRP (horseradish peroxidase) to BSA (bovine serum albumin). Furthermore, Ti₃ AlC₂ nanomaterials was also applied for dual-selective enrichment of phosphopeptides and glycopeptides from mouse brain neocortex lysate and human serum lysate respectively before mass spectrometry (MS) analysis, yielding twenty-two unique phosphopeptides from thirteen phosphoproteins and fifty-three unique glycopeptides from thirty-seven glycoproteins, respectively. This work will open a new avenue and will greatly promote sample preparation for mass spectrometric analysis in phosphoproteomics and glycoproteomics research.

Formation of supramolecular channels by reversible unwinding-rewinding of bis(indole) double helix via ion coordination

Stimulus-responsive reversible transformation between two structural conformers is an essential process in many biological systems. An example of such a process is the conversion of amyloid-β peptide into β-sheet-rich oligomers, which leads to the accumulation of insoluble amyloid in the brain, in Alzheimer's disease. To reverse this unique structural shift and prevent amyloid accumulation, β-sheet breakers are used. Herein, we report a series of bis(indole)-based biofunctional molecules, which form a stable double helix structure in the solid and solution state. In presence of chloride anion, the double helical structure unwinds to form an anion-coordinated supramolecular polymeric channel, which in turn rewinds upon the addition of Ag⁺ salts. Moreover, the formation of the anion-induced supramolecular ion channel results in efficient ion transport across lipid bilayer membranes with excellent chloride selectivity. This work demonstrates anion-cation-assisted stimulus-responsive unwinding and rewinding of artificial double-helix systems, paving way for smart materials with better biomedical applications.

Selective separation of planar and non-planar hydrocarbons using an aqueous Pd6 interlocked cage

Polycyclic aromatic hydrocarbons (PAHs) find multiple applications ranging from fabric dyes to optoelectronic materials. Hydrogenation of PAHs is often employed for their purification or derivatization. However, separation of PAHs from their hydrogenated analogues is challenging because of their similar physical properties. An example of such is the separation of 9,10-dihydroanthracene from phenanthrene/anthracene which requires fractional distillation at high temperature (∼340 °C) to obtain pure anthracene/phenanthrene in coal industry. Herein we demonstrate a new approach for this separation at room temperature using a water-soluble interlocked cage (1) as extracting agent by host-guest chemistry. The cage was obtained by self-assembly of a triimidazole donor L·HNO3 with cis-[(tmeda)Pd(NO3)2] (M) [tmeda = N,N,N',N'-tetramethylethane-1,2-diamine]. 1 has a triply interlocked structure with an inner cavity capable of selectively binding planar aromatic guests.

[Application of smart responsive materials in phosphopeptide and glycopeptide enrichment]

Phosphorylation and glycosylation of proteins, two of the most widely studied post-translational modifications (PTMs), have shown increasing potential in the early non-invasive diagnosis, prognosis, and therapeutic evaluation of diseases. Besides regulating the function of cell membranes and intracellular signal transduction, protein phosphorylation participates in mitochondrial function and cellular and transcriptional metabolism. Protein glycosylation plays an important role in both intracellular and extracellular signal transduction and intracellular endocytosis. Aberrant phosphorylation and glycosylation of proteins are frequently observed in clinical proteomic studies and in the discovery of disease-related biomarkers. There are generally three methods for detecting protein phosphorylation/glycosylation: isotope radiolabeling, western blotting, and mass spectrometry. Mass spectrometry has become the most important and advantageous detection method due to its high throughput and time- and labor-efficiency. However, phosphopeptides and glycopeptides have low stoichiometry and ionization efficiency, and a large number of non-phosphopeptides and -glycopeptides interference. These issues make it difficult to directly detect phosphopeptides and glycopeptides by mass spectrometry. Therefore, the enrichment of phosphopeptides and glycopeptides before mass spectrometry detection is a key step. At present, a variety of materials have been developed for enrichment studies of phosphopeptides and glycopeptides. For example, immobilized metal affinity (IMAC) and metal oxide affinity chromatography (MOAC) methods are mostly used for the enrichment of phosphopeptides. The IMAC mainly uses positively charged metal ions and negatively charged phosphate groups to attract each other for the purpose of enriching phosphopeptides. MOAC materials rely on the chelation of metal atoms and phosphate oxygens to capture phosphopeptides. IMAC and MOAC materials rely on strong interactions between metals and phosphate groups, which often lead to difficult elution. The enrichment method for glycopeptides is mainly based on the difference in hydrophilicity between glycopeptides and non-glycopeptides, which are mainly enriched by hydrophilic interaction chromatography (HILIC). In addition, materials containing compounds such as boronic acid and lectin materials are also widely used for the separation and enrichment of glycopeptides. Smart responsive materials have also been successively reported for the enrichment of phosphopeptides and glycopeptides due to their unique responsiveness and reversibility. Smart responsive materials can respond to external stimuli; undergo structural and property changes; and convert signals such as optical, electrical, thermal, and mechanical into biochemical signals. Responsive molecules are a prerequisite for determining the response properties of smart responsive materials, and their reversible isomerization under different stimuli (such as temperature, pH, light, mechanical stress, and electromagnetic field) will lead to dynamic changes in the physical and chemical properties of materials. Compared with traditional materials, smart responsive materials can be reversibly "turned on" and "off" with better controllability. Exogenous stimuli, including temperature, light, ultrasound, electromagnetic field, and mechanical stress, can be implemented in a specific time and space. Exogenous responsive materials do not depend on changes in the reaction system itself and are non-invasive. Enzymes, pH, redox, solution polarity, and ionic strength are endogenous stimuli. Endogenous responsive materials depend on changes in the reaction system itself, and sometimes the regulation process requires the introduction of other chemicals into the reaction system. The identification, capture, and release of phosphopeptides or glycopeptides can be achieved by modulating the interactions between smart responsive materials and phosphopeptides or glycopeptides (such as hydrogen bonds, and electrostatic and hydrophobic interactions). This review classifies smart responsive materials according to the types of stimuli, which are specifically divided into exogenous and endogenous responsive materials. The enrichment of phosphopeptides and glycopeptides of exogenous/endogenous responsive materials and endogenous/exogenous co-responsive materials are summarized. In addition, we discuss the development prospects of smart responsive materials in the enrichment of phosphopeptides and glycopeptides, and also raised the challenges existing in the application of smart responsive materials in other protein post-translational modifications.

Metal-organic framework-mediated synthesis of hierarchical layered double hydroxide for high-efficiency enrichment of phosphopeptides

When applied as adsorbents for phosphopeptides enrichment, two-dimensional (2D) layered double hydroxides (LDHs) are usually limited by the disadvantages of buried affinity sites and reduced specific surface area. Multifarious exfoliation strategies have been implemented to compensate for these deficiencies, but tedious exfoliation process cannot meet the requirements of LDHs as high-efficiency adsorbents. Incorporating LDHs with three-dimensional (3D) template can avoid tedious exfoliation and produce hierarchical LDHs with large specific surface area and massive affinity sites. Herein, a hierarchical LDH (denoted as Fe₃O₄@ZIF-8@Zn-Ga LDH) was prepared by metal-organic framework (MOF)-mediated synthesis strategy, and a magnetic solid-phase extraction (MSPE) platform was constructed and employed for phosphopeptides enrichment with high efficiency. The unique 3D structure and abundant metal nodes of MOF provide 3D template and metal sources for in-situ nucleation and generation of LDH. Large specific surface area and massive exposed Zn and Ga endow Fe₃O₄@ZIF-8@Zn-Ga LDH with high enrichment efficiency toward phosphopeptides from complicated biological samples. With the aid of mass spectrometry (MS) techniques, we profiled endogenous or global phosphopeptides from human saliva and serum, which proved the practical application value of this material.

Dendrimer-Modified Silica Nanoparticles for Efficient Enrichment of Low-Concentration Peptides

Peptide profiling based on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is of particular interest as it can provide physiologically and pathologically related information of the bio-samples. Due to the complexity of real biological samples, MALDI-TOF MS-based peptide mapping methods rely strongly on particular enrichment methods to improve the signal intensity. This paper introduces third-generation dendrimer-modified SBA-15 with the surface functionalization of amino and carboxyl group, respectively (denoted as SBA-15/G3-NH₂ and SBA-15/G3-COOH), for the efficient capture of low-abundance peptides. The enrichment ability of the nanocomposites was evaluated by standard peptides digests and real biological samples. The synthesized nanocomposites incorporated the benefit of dendrimers and mesoporous silica nanomaterial SBA-15, showing enhanced peptide enrichment ability. Therefore, this work may provide a new class of nanomaterials for peptide mapping from biological samples.

Layer-by-layer assembly of multilayered double hydroxides/polyoxometalate-coated magnetic nanoparticles for highly efficient phosphopeptide enrichment

A layer-by-layer (LbL) assembly strategy was developed to prepare multilayered double hydroxide/polyoxometalate shell-coated magnetic nanoparticles. The introduction of functional shells not only offered abundant affinity sites of metal oxide and metal ions but also increased the surface area for the contact with targets. By combining the enrichment strategies of immobilized metal ion affinity chromatography and metal oxide affinity chromatography, the nanomaterial can capture phosphopeptides via a synergistic effect. The method presented a low detection limit of 0.1 fmol in combination with matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) analysis. The nanomaterial showed satisfactory selectivity (1:1:5000 M ratio of α-/β-casein/bovine serum albumin), good recovery (92.07%), high adsorption capacity (117.6 mg g^-1), and ten times reusability for capturing phosphopeptides.

Interface-Engineered Hollow Nanospheres with Titanium(IV) Binding Sites and Microwindows as Affinity Probes for Ultrafast and Enhanced Phosphopeptides Enrichment

Enrichment and identification of phosphopeptides in real biological samples are of great significance in many aspects. Herein, Ti⁴⁺-immobilized silica hollow nanospheres were tailored via chelating with phosphonic acid groups produced from dealkylation of phosphonate ester functionalized silica hollow nanospheres, which were synthesized through a single micelle templated method with diethylphosphatoethyltriethoxysilane (DPTES) and tetramethoxysilane (TMOS) as silane precursors under neutral conditions. The characterization results of transmission electron microscopy (TEM), nitrogen sorption isotherms, FT-IR, and energy-dispersive X-ray (EDX) spectroscopy confirmed the successful preparation of Ti⁴⁺-immobilized silica hollow nanospheres (SHS-Ti; approximately 17 nm particle size), which possessed a 10 nm hollow cavity with 1.6 nm micropores on the thin shell (about 3.5 nm). Attributed to the immobilized Ti⁴⁺ and high specific area (396 m²/g), SHS-Ti was applied as a Ti⁴⁺-immobilized metal affinity chromatography (Ti-IMAC) material and showed good specificity, a low limit of detection (5 fmol), high selectivity (tryptic digestion mixture of bovine serum albumin/β-casein, 1000:1 molar ratio), high binding capacity (120 mg/g for pyridoxal 5'-phosphate), and a high binding constant (1.30 × 10³ L/mg). Particularly, benefiting from the unique hollow structure with microwindows on the thin shell, a short transport path, and small mass transfer resistance, SHS-Ti exhibited excellent enrichment speed in which both phosphopeptide loading and elution could be completed in 1 min. The 5298 unique phosphopeptides from 1618 unique phosphoproteins were identified after enrichment by SHS-Ti from 100 μg Jurkat cell lysates within three independent replicates. The results showed that SHS-Ti could be utilized as a novel and promising enrichment probe for phosphopeptide characterization in MS-based phosphoproteomics and related fields.