Divergent Adsorption Behavior Controlled by Primary Coordination Sphere Anions in the Metal-Organic Framework Ni2X2BTDD

Postsynthetically Modified Alkoxide-Exchanged Ni2(OR)2BTDD: Synergistic Interactions of CO2 with Open Metal Sites and Functional Groups

Postsynthetic modifications (PSMs) of metal-organic frameworks (MOFs) play a crucial role in enhancing material performance through open metal site (OMS) functionalization or ligand exchange. However, a significant challenge persists in preserving open metal sites during ligand exchange, as these sites are inherently bound by incoming ligands. In this study, for the first time, we introduced alkoxides by exchanging bridging chloride in Ni2Cl2BTDD (BTDD=bis (1H-1,2,3,-triazolo [4,5-b],-[4',5'-i]) dibenzo[1,4]dioxin) through PSM. Rietveld refinement of synchrotron X-ray diffraction data indicated that the alkoxide oxygen atom bridges Ni(II) centers while the OMSs of the MOF are preserved. Due to the synergy of the existing OMS and introduced functional group, the alkoxide-exchanged MOFs showed CO2 uptakes superior to the pristine MOF. Remarkably, the tert-butoxide-substituted Ni_T exhibited a nearly threefold and twofold increase in CO2 uptake compared to Ni2Cl2BTDD at 0.15 and 1 bar, respectively, as well as high water stability relative to the other exchanged frameworks. Furthermore, the Grand Canonical Monte Carlo simulations for Ni_T suggested that CO2 interacts with the OMS and the surrounding methyl groups of tert-butoxide groups, which is responsible for the enhanced CO2 capacity. This work provides a facile and unique synthetic strategy for realizing a desirable OMS-incorporating MOF platform through bridging ligand exchange.

Cobalt(III) Halide Metal-Organic Frameworks Drive Catalytic Halogen Exchange

The selective halogenation of complex (hetero)aromatic systems is a critical yet challenging transformation that is relevant to medicinal chemistry, agriculture, and biomedical imaging. However, current methods are limited by toxic reagents, expensive homogeneous second- and third-row transition metal catalysts, or poor substrate tolerance. Herein, we demonstrate that porous metal-organic frameworks (MOFs) containing terminal Co(III) halide sites represent a rare and general class of heterogeneous catalysts for the controlled installation of chlorine and fluorine centers into electron-deficient (hetero)aryl bromides using simple metal halide salts. Mechanistic studies support that these halogen exchange (halex) reactions proceed via redox-neutral nucleophilic aromatic substitution (SNAr) at the Co(III) sites. The MOF-based halex catalysts are recyclable, enable green halogenation with minimal waste generation, and facilitate halex in a continuous flow. Our findings represent the first example of SNAr catalysis using MOFs, expanding the lexicon of synthetic transformations enabled by these materials.

CYCU-3: an Al(III)-based MOF for SO2 capture and detection

The Al(III)-based MOF CYCU-3 exhibits a relevant SO2 adsorption performance with a total uptake of 11.03 mmol g-1 at 1 bar and 298 K. CYCU-3 displays high chemical stability towards dry and wet SO2 exposure. DRIFTS experiments and computational calculations demonstrated that hydrogen bonding between SO2 molecules and bridging Al(III)-OH groups are the preferential adsorption sites. In addition, photoluminescence experiments demonstrated the relevance of CYCU-3 for application in SO2 detection with good selectivity for SO2 over CO2 and H2O. The change in fluorescence performance demonstrates a clear turn-on effect after SO2 interaction. Finally, the suppression of ligand-metal energy transfer along with the enhancement of ligand-centered π* → π electronic transition was proposed as a plausible fluorescence mechanism.

Prediction of Multiple Hydrogen Ligation at a Vanadium(II) Site in a Metal-Organic Framework

Densifying hydrogen in a metal-organic framework (MOF) at moderate pressures can circumvent challenges associated with high-pressure compression. The highly tunable structural and chemical composition in MOFs affords vast possibilities to optimize binding interactions. At the heart of this search are the nanoscale characteristics of molecular adsorption at the binding site(s). Using density functional theory (DFT) to model binding interactions of hydrogen to the exposed metal site of cation-exchanged MFU-4l, we predict multiple hydrogen ligation of H₂ at the first coordination sphere of V(II) in V(II)-exchanged MFU-4l. We find that the strength of this binding between the metal site and H₂ molecules can be tuned by altering the halide counterion adjacent to the metal site and that the fluoride containing node affords the most favorable interactions for high-density H₂ storage. Using energy decomposition analysis, we delineate electronic contributions that enable multiple hydrogen ligation and demonstrate its benefits for hydrogen adsorption and release at modest pressures.

Tuning Metal-Dihydrogen Interaction in Metal-Organic Frameworks for Hydrogen Storage

Inspired by a recently reported metal-organic framework (MOF), V₂Cl_2.8(btdd) [H₂btdd = bis(1H-1,2,3-triazolo[4,5-b],[4',5'-i])dibenzo[1,4]dioxin], that shows a greatly improved H₂ adsorption enthalpy, we employ density functional theory to probe how the number of d electrons and the mixed valences influence the M-H₂ interaction inside the M₂Cl_x(btdd) MOFs. We find a cliff in the H₂ adsorption energy: the interaction strength remains strong from Sc to V and then falls sharply at Cr. Our results confirm V₂Cl_2.8(btdd) as one of the best performing hydrogen adsorbents and predict that Ti₂Cl_2.8(btdd) is equally promising while Sc₂Cl₂(btdd) and Ti₂Cl₂(btdd) may be even better. Our analysis indicates that an empty d_x²-y² orbital is the key to the much stronger binding of H₂ at the open M(II) site (M = Sc, Ti, or V), whereas a partially filled d_x²-y² orbital in Cr(II) and later M(II) greatly weakens H₂ binding. Our findings will be useful in designing MOFs to enhance H₂ adsorption.

Inhibition, Binding of Organometallics, and Thermally Induced CO Release in an MFU-4-Type Metal-Organic Framework Scaffold with Open Bidentate Bibenzimidazole Coordination Sites

Triazolate-based MFU-4-type metal-organic frameworks are promising candidates for various applications, of which heterogeneous catalysis has emerged as a hot topic owing to the facile post-synthetic metal and ligand exchange in Kuratowski secondary building units (SBUs). Herein, we present the largest non-interpenetrated isoreticular MFU-4-type framework CFA-19 ([Co₅^IICl₄(H₂-bibt)₃]; H₄-bibt = 1,1',5,5'-tetrahydro-6,6'-biimidazo[4,5-f]benzotriazole; CFA-19 = Coordination Framework Augsburg University-19) and the CFA-19-Tp derivative featuring trispyrazolylborate inhibited SBUs as a scaffold with open bibenzimidazole coordination sites at the backbone of the H₄-bibt linker. The proof-of-principle incorporation of accessible M^IBr(CO)₃ (M = Re, Mn) sites in CFA-19-Tp was revealed by single-crystal X-ray diffraction, and a thermally induced CO release was observed for MnBr(CO)₃. Deprotonation of bibenzimidazole was also achieved by the reaction with ZnEt₂.

Capture Instead of Release: Defect-Modulated Radionuclide Leaching Kinetics in Metal-Organic Frameworks

Comparison of defect-controlled leaching-kinetics modulation of metal-organic frameworks (MOFs) and porous functionalized silica-based materials was performed on the example of a radionuclide and radionuclide surrogate for the first time, revealing an unprecedented readsorption phenomenon. On a series of zirconium-based MOFs as model systems, we demonstrated the ability to capture and retain >99% of the transuranic ²⁴¹Am radionuclide after 1 week of storage. We report the possibility of tailoring radionuclide release kinetics in MOFs through framework defects as a function of postsynthetically installed organic ligands including cation-chelating crown ether-based linkers. Based on comprehensive analysis using spectroscopy (EXAFS, UV-vis, FTIR, and NMR), X-ray crystallography (single crystal and powder), and theoretical calculations (nine kinetics models and structure simulations), we demonstrated the synergy of radionuclide integration methods, topological restrictions, postsynthetic scaffold modification, and defect engineering. This combination is inaccessible in any other material and highlights the advantages of using well-defined frameworks for gaining fundamental knowledge necessary for the advancement of actinide-based material development, providing a pathway for addressing upcoming challenges in the nuclear waste administration sector.

High Gravimetric and Volumetric Ammonia Capacities in Robust Metal-Organic Frameworks Prepared via Double Postsynthetic Modification

Ammonia is a promising energy vector that can store the high energy density of hydrogen. For this reason, numerous adsorbents have been investigated as ammonia storage materials, but ammonia adsorbents with a high gravimetric/volumetric ammonia capacity that can be simultaneously regenerated in an energy-efficient manner remain underdeveloped, which hampers their practical implementation. Herein, we report Ni_acryl_TMA (TMA = thiomallic acid), an acidic group-functionalized metal-organic framework prepared via successive postsynthetic modifications of mesoporous Ni₂Cl₂BTDD (BTDD = bis(1H-1,2,3,-triazolo [4,5-b],-[4',5'-i]) dibenzo[1,4]dioxin). By virtue of the densely located acid groups, Ni_acryl_TMA exhibited a top-tier gravimetric ammonia capacity of 23.5 mmol g^-1 and the highest ammonia storage of 0.39 g cm^-3 at 1 bar and 298 K. The structural integrity and ammonia storage capacity of Ni_acryl_TMA were maintained after ammonia adsorption-desorption tests over five cycles. Temperature-programmed desorption analysis revealed that the moderate strength of the interaction between the functional groups and ammonia significantly reduced the desorption temperature compared to that of the pristine framework with open metal sites. The structures of the postsynthetic modified analogues were elucidated based on Pawley/Rietveld refinement of the synchrotron powder X-ray diffraction patterns and van der Waals (vdW)-corrected density functional theory (DFT) calculations. Furthermore, the ammonia adsorption mechanism was investigated via in situ infrared and vdW-corrected DFT calculations, revealing an atypical guest-induced binding mode transformation of the integrated carboxylate. Dynamic breakthrough tests showed that Ni_acryl_TMA can selectively capture traces of ammonia under both dry and wet conditions (80% relative humidity). These results demonstrate that Ni_acryl_TMA is a superior ammonia storage/capture material.

Immobilization of Lewis Basic Nitrogen Sites into a Chemically Stable Metal-Organic Framework for Benchmark Water-Sorption-Driven Heat Allocations

Developing efficient and stable water adsorbents for adsorption-driven heat transfer technology still remains a challenge due to the lack of efficient strategies to enhance low-pressure water uptakes. The authors herein demonstrate that the immobilization of Lewis basic nitrogen sites into metal-organic frameworks (MOFs) can improve water uptake and target benchmark coefficient of performances (COPs) for cooling and heating. They present the water sorption properties of a chemically stable MOF (termed as Zr-adip), designed by incorporating hydrophilic nitrogen sites into the adsorbent MIP-200. Zr-adip exhibits S-shaped sorption isotherms with an extremely high water uptake of 0.43 g g-1  at 303 K and P/P0  = 0.25, higher than MIP-200 (0.39 g g-1 ), KMF-1 (0.39 g g-1 ) and MOF-303 (0.38 g g-1 ). Theoretical calculations reveal that the incorporated N sites can serve as secondary adsorption sites to moderately interact with water, providing more binding sites to strengthen the water binding affinity. Zr-adip achieves exceptionally high COPs of 0.79 (cooling) and 1.75 (heating) with a low driving temperature of 70 °C, outperforming MIP-200 (0.78 and 1.53) and KMF-1 (0.75 and 1.74). Combined with its ultrahigh stability, excellent cycling performance, and easy regeneration, Zr-adip represents one of the best water adsorbents for adsorption-driven cooling and heating.