Oxygen Evolution Reaction Driven by Charge Transfer from a Cr Complex to Co-Containing Polyoxometalate in a Porous Ionic Crystal

A [Co19(OH)12]26+-Incorporating Polyoxotungstate for Electrocatalytic Oxygen Evolution

Considerable efforts have been devoted to the research of transition-metal oxides for oxygen evolution reaction (OER) catalysts. Polyoxometalates (POMs) are one of the typical compounds of transition-metal oxides. In particular, cobalt-containing POMs have attracted much attention as potential catalysts for the OER. In this work, a new [Co19(OH)12]26+ unit-incorporating polyoxotungstate, Na34[Co19(OH)12(α-SiW10O37)6]·46H2O (referred to as Co19Si6W60), has been successfully prepared and explored for highly efficient OER. The most obvious feature is that the giant [Co19(OH)12(α-SiW10O37)6]34- subunit in Co19Si6W60 consists of six dilacunary Keggin-type [α-SiW10O37]10- groups interlaced and wrapped around a hexagonal-like [Co19(OH)12]26+ nanosheet, forming a sandwich-type structure. Furthermore, in comparison with other well-known Co-containing Keggin-type POMs of [Co4(H2O)2(α-PW9O34)2]10- (denoted as Co4(PW9)2) and [α-CoW12O40]6- (denoted as CoW12) as well as cobalt oxide (CoO), the Co19Si6W60 electrocatalyst exhibits an overpotential of 329.4 mV at 10 mA·cm-2, a low Tafel slope of 80.8 mV·dec-1, and a high stability in 0.1 M KOH electrolyte for over 40 h at 60.0 mA·cm-2. The hydroxyl bridges in Co19Si6W60 characterized by cooperative Co-O-Co interactions and multiple catalytic active sites act as a key factor in improving the electrocatalytic performance of POMs, thereby offering a cost-effective electrocatalyst with potential applications in renewable energy.

A Tetranuclear NiII 4O4 Cubane Molecular Complex as an Efficient Electrocatalyst for Oxygen Evolution Reaction: From Synthesis to Mechanistic Insights

The oxygen evolution reaction (OER) is integral to electrochemical energy systems; however, its intrinsic sluggish kinetics necessitate the design of high-performance electrocatalysts to minimize overpotential, enhance the durability, and optimize the efficiency. Significant efforts have been dedicated to developing OER catalysts based on earth-abundant transition-metal complexes. Here, the efficacy of a tetranuclear cubane-cored Ni(II) complex, [Ni₄(LH)₄(MeOH)]·CHCl₃ (1), in OER is demonstrated. The complex is synthesized using a tetradentate Schiff-base ligand, [2-{(E)-(2-hydroxyphenylimino)methyl)-6-(hydroxymethyl)-4-methylphenol}], and characterized by single-crystal X-ray diffraction. The redox properties of complex 1 are evaluated by cyclic voltammetry in the solid state, which emphasize the quasireversible oxidation state of the Ni(II) metal center. The complex 1 is immobilized on activated carbon cloth (CC), referred as CC-1, which demonstrates efficient OER catalysis, subsequently activating to form the Ni(O)OH catalyst. The postreaction analysis including UV-vis, FTIR, scanning electron microscopy-energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy confirm the stability of molecular complex 1. The results demonstrate efficient OER catalysis with a low overpotential of 330 mV versus reversible hydrogen electrode and a Tafel slope of 64 mV dec-1, confirming an effective OER catalyst in alkaline medium with a deep understanding of the core reaction mechanisms.

Polyoxometalated metal-organic framework superstructure for stable water oxidation

Stable, nonprecious catalysts are vital for large-scale alkaline water electrolysis. Here, we report a grafted superstructure, MOF@POM, formed by self-assembling a metal-organic framework (MOF) with polyoxometalate (POM). In situ electrochemical transformation converts MOF into active metal (oxy)hydroxides to produce a catalyst with a low overpotential of 178 millivolts at 10 milliamperes per square centimeter in alkaline electrolyte. An anion exchange membrane water electrolyzer incorporating this catalyst achieves 3 amperes per square centimeter at 1.78 volts at 80°C and stable operation at 2 amperes per square centimeter for 5140 hours at room temperature. In situ electrochemical spectroscopy and theoretical studies reveal that the synergistic interactions between metal atoms create a fast electron-transfer channel from catalytic iron and cobalt sites, nickel, and tungsten in the polyoxometalate to the electrode, stabilizing the metal sites and preventing dissolution.

Dual Regulation of Sensitizers and Cluster Catalysts in Metal-Organic Frameworks to Boost H2 Evolution

Photocatalytic efficiency is closely correlated to visible-light absorption ability, electron transfer efficiency and catalytic center activity of photocatalysts, nevertheless, the concurrent management of these factors to improve photocatalytic efficiency remains underexplored. Herein, we proposed a sensitizer/catalyst dual regulation strategy on the polyoxometalate@Metal-Organic Framework (POM@MOF) molecular platform to construct highly efficient photocatalysts. Impressively, Ni-Sb9@UiO-Ir-C6, obtained by coupling strong sensitizing [Ir(coumarin 6)2(bpy)]+ with Ni-Sb9 POM with extremely exposed nickel site [NiO3(H2O)3], can drive H2 evolution with a turnover number of 326923, representing a record value among all the POM@MOF composite photocatalysts. This performance is over 34 times higher than that of the typical Ni4P2@UiO-Ir constructed from [Ir(ppy)2(bpy)]+ and Ni4P2 POM. Systematical investigations revealed that dual regulation of sensitizing and catalytic centers endowed Ni-Sb9@UiO-Ir-C6 with strong visible-light absorption, efficient inter-component electron transfer and high catalytic activity to concurrently promote H2 evolution. This work opens up a new avenue to develop highly active POM@MOF photocatalysts by dual regulation of sensitizing/catalytic centers at the molecular level.

Self-optimizing Cobalt Tungsten Oxide Electrocatalysts toward Enhanced Oxygen Evolution in Alkaline Media

Self-optimizing mixed metal oxides represent a novel class of electrocatalysts for the advanced oxygen evolution reaction (OER). Here, we report self-assembled cobalt tungsten oxide nanostructures on a lab-synthesized copper oxide substrate through a single-step deposition approach. The resulting composite exhibits remarkable self-optimization behavior, shown by significantly reduced overpotentials and enhanced current densities, accompanied with substantial increase in OER kinetics, electrocatalytically active surface area, surface wettability, and electrical conductivity. Under operating conditions, interfacial restructuring of the electrocatalyst reveals the in situ formation of oxidized cobalt species as the true active site. Complementary density functional theory (DFT) calculations further demonstrate the formation of *OOH intermediate as the rate-determining step of OER, and highlight the adaptive binding of oxygen intermediates, which transitions from tungsten to cobalt site during OER process. Our study provides a fundamental understanding of the self-optimization mechanism and advances the knowledge-driven design of efficient water-splitting electrocatalysts.

Interfacial engineering of heterostructured CoP/FeP nanoflakes as bifunctional electrocatalyts toward alkaline water splitting

Exploring highly-effective and nonprecious electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is urgent and challenging for developing the hydrogen economy. Interface engineering is a feasible approach for regulating the surface electronic distribution, thereby promoting the catalytic performance. Herein, the CoP/FeP heterostructure is fabricated via the oxidation and phosphating treatments of Fe-decorated Ni(OH)2 nanoflakes. The hierarchically porous nanoflakes can expose more active species, while the formation of CoP/FeP heterojunctions have provided extra catalytic active sites and accelerated the charge transfer process. Theoretical calculations reveal that the interfacial electron coupling between CoP and FeP in the heterostructure has promoted the adsorption of intermediate species on catalytic sites, thereby decreasing the Gibbs free energy during the catalysis. The as-fabricated CoP/FeP catalyst requires small overpotentials of 190 mV and 280 mV to realize a current density of 10 mA cm-2 for alkaline HER and OER, respectively. The electrolytic cell with CoP/FeP as catalyst needs a voltage of 1.61 V to reach 10 mA cm-2, and can run stably for over 25 h. The present study highlights a superiority of interfacial engineering to construct efficient electrocatalysts for water electrolysis.

Electron-phonon coupling and coherent energy superposition induce spin-sensitive orbital degeneracy for enhanced acidic water oxidation

The development of acid-stable water oxidation electrocatalysts is crucial for high-performance energy conversion devices. Different from traditional nanostructuring, here we employ an innovative microwave-mediated electron-phonon coupling technique to assemble specific Ru atomic patterns (instead of random Ru-particle depositions) on Mn0.99Cr0.01O2 surfaces (RuMW-Mn1-xCrxO2) in RuCl3 solution because hydrated Ru-ion complexes can be uniformly activated to replace some Mn sites at nearby Cr-dopants through microwave-triggered energy coherent superposition with molecular rotations and collisions. This selective rearrangement in RuMW-Mn1-xCrxO2 with particular spin-differentiated polarizations can induce localized spin domain inversion from reversed to parallel direction, which makes RuMW-Mn1-xCrxO2 demonstrate a high current density of 1.0 A cm-2 at 1.88 V and over 300 h of stability in a proton exchange membrane water electrolyzer. The cost per gallon of gasoline equivalent of the hydrogen produced is only 43% of the 2026 target set by the U.S. Department of Energy, underscoring the economic significance of this nanotechnology.

Modulating the Supramolecular Assembly of α-Cyclodextrin and Anderson-type Polyoxometalate through Covalent Modifications

A series of unprecedented supramolecular complexes of covalently modified Anderson-type polyoxometalates (POMs) and α-cyclodextrins (α-CDs) have been obtained and characterized in solid state by single-crystal X-ray diffraction, and in aqueous solution using various techniques including 1H DOSY NMR, 2D NOESY 1H NMR, isothermal titration calorimetry (ITC), and electrospray ionization time-of-flight mass spectroscopy (ESI-TOF-MS). It has been demonstrated that the supramolecular assembly process could be modulated by different covalent modification modes of the Anderson POMs, giving rise to a new type of POM/α-CD complexes featuring organic-inorganic pseudo-rotaxane structures, which are in good contrast to those of POM/γ-CD complexes of poly-rotaxane structures. Moreover, it is delighted to find that these pseudo-rotaxanes of POM/α-CD complexes exhibit stable chirality in aqueous solution, which has not been accomplished in previously reported POM/CD assemblies.

Assembled Structures and Electrical Conductivities of Salts Comprised of Cationic Sandwich Complexes and Polyoxometalates

Polyoxometalates (POMs) are recognized for their diverse structures and catalytic properties, yet their organometallic salts have not been thoroughly investigated. In this study, we synthesized salts of a Keggin-type POM with cationic sandwich complexes featuring various substituents, [X]2[SMo12O40] [X = Ru(C5H5)(C6H5R); R = H (1a), Me (1b), Bu (1c)], [Co(C5H5)2 (2), and Co(C5Me5)2 (3)]. These salts exhibited similar structural characteristics, with each anion surrounded by 10 cations, forming two-dimensional sheet arrangements through O···O anion-anion contacts, except for the salt of 1c, which exhibited one-dimensional contact owing to the larger cation substituent. Additionally, [2](THA)[Mo6O19], [3]2[Mo6O19], and [3](THA)[SMo12O40], containing the Lindqvist-type POM [Mo6O19] and/or tetrahexylammonium (THA) cation, were obtained, with the packing structure of [3]2[Mo6O19] closely resembling that of [X]2[SMo12O40]. Solvate crystals of [1a]3[PMo12O40] were also prepared. [1a]2[SMo12O40] exhibits an electrical conductivity σ of 1.4 × 10-7 S cm-1 at 373 K, which is 2 orders of magnitude higher than those of (THA)2[SMo12O40] and [1a]PF6.

Deciphering the work function induced local charge regulation towards activating an octamolybdate cluster-based solid for acidic water oxidation

The advancement of highly robust and efficient electrocatalysts for the oxygen evolution reaction (OER) under acidic conditions is imperative for the sustainable production of green hydrogen. In accomplishing sustainable and sturdy electrocatalysts for oxygen evolution at low pH, the challenge is tough for non-iridium/ruthenium-based electrocatalysts. This study elaborates on the intrinsic alterations in electronic arrangements and structural disorder upon the precise activation of an octamolybdate cluster-based solid [{Cu(pz)4}2Mo8O26]·2H2O through room temperature grinding with rGO (reduced graphene oxide), resulting in enhanced conductivity, stability, and activity of the electrocatalyst towards the acidic OER without employing any benchmark metal ion (Ru or Ir). Additionally, the work function of the composites was found to be low compared to that of pristine polyoxometalates (POMs), indicative of the improved conducive behavior, which is lacking in the POM structure. The catalyst displays a notably reduced overpotential of 185 mV to achieve a current density of 10 mA cm-2, coupled with significant stability lasting 24 hours at a higher current density of 100 mA cm-2. These findings propose the manipulation of crystalline POMs with highly conductive non-metallic elements to facilitate superior water oxidation at lower pH levels which can help in the production of green hydrogen.

Synthesis of Isotypic Giant Polymolybdate Cages for Efficient Photocatalytic C-C Coupling Reactions

The construction of isotypic high-nuclearity inorganic cages with identical pristine parent structure and increasing nuclearity is highly important for molecular growth and structure-property relationship study, yet it still remains a great challenge. Here, we provide an in situ growth approach for successfully synthesizing a series of new giant hollow polymolybdate dodecahedral cages, Mo250, Mo260-I, and Mo260-E, whose structures are growth based on giant polymolybdate cage Mo240. Remarkably, they show two pathways of nuclear growth based on Mo240, that is, the growth of 10 and 20 Mo centers on the inner and outer surfaces to afford Mo250 and Mo260-I, respectively, and the growth of 10 Mo centers both on the inner and outer surfaces to give Mo260-E. To the best of our knowledge, this is the first study to display the internal and external nuclear growth of a giant hollow polyoxometalate cage. More importantly, regular variations in structure and nuclearity confer these polymolybdate cages with different optical properties, oxidative activities, and hydrogen atom transfer effect, thus allowing them to exhibit moderate to excellent photocatalytic performance in oxidative cross-coupling reactions between different unactivated alkanes and N-heteroarenes. In particular, Mo240 and Mo260-E with better comprehensive abilities can offer the desired coupling product with yield up to 92% within 1 h.

High-Nuclear Co-Added Polyoxometalate-Based Chain: Electrocatalytic Oxygen Production

A high-nuclear Co-added polyoxometalate (CoAP) was synthesized via a hydrothermal reaction: H14.5K9Na7.5-{[Co8(μ2-OH)(μ3-OH)2(H2O)2(Co(H2O)GeW6O26)(B-α-GeW9O34)2][BO(OH)2][Co12(μ2-OH)(μ3-OH)5(H2O)3(Co(H2O)GeW6O26)(GeW6O26)(B-α-GeW9O34)]}·46H2O (1). The polyoxoanion of 1 contains a large Co20 cluster gathered by lacunary GeW6O26 and GeW9O34 subunits. 1 represents a one-dimensional (1D) chain formed by adjacent polyoxoanions coupling through a CoO6 double bridge, showing the first example of a high-nuclear CoAP-based inorganic chain. 1 served as an efficient electrocatalyst in oxygen evolution reactions (OERs).

Stabilization of Ni-containing Keggin-type polyoxometalates with variable oxidation states as novel catalysts for electrochemical water oxidation

The development of new recyclable and inexpensive electrochemically active species for water oxidation catalysis is the most crucial step for future utilization of renewables. Particularly, transition metal complexes containing internal multiple, cooperative metal centers to couple with redox catalysts in the inorganic Keggin-type polyoxometalate (POM) framework at high potential or under extreme pH conditions would be promising candidates. However, most reported Ni-containing POMs have been highly unstable towards hydrolytic decomposition, which precludes them from application as water oxidation catalysts (WOCs). Here, we have prepared new tri-Ni-containing POMs with variable oxidation states by charge tailored synthetic strategies for the first time and developed them as recyclable POMs for water oxidation catalysts. In addition, by implanting corresponding POM anions into the positively charged MIL-101(Cr) metal-organic framework (MOF), the entrapped Ni2+/Ni3+ species can show complete recyclability for water oxidation catalysis without encountering uncontrolled hydrolysis of the POM framework. As a result, a low onset potential of approximately 1.46 V vs. NHE for water oxidation with stable WOC performance is recorded. Based on this study, rational design and stabilization of other POM-electrocatalysts containing different multiple transition metal centres could be made possible.

Distortion-Induced Interfacial Charge Transfer at Single Cobalt Atom Secured on Ordered Intermetallic Surface Enhances Pure Oxygen Production

In this work, atomic cobalt (Co) incorporation into the Pd2Ge intermetallic lattice facilitates operando generation of a thin layer of CoO over Co-substituted Pd2Ge, with Co in the CoO surface layer functioning as single metal sites. Hence the catalyst has been titled Co1-CoO-Pd2Ge. High-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy confirm the existence of CoO, with some of the Co bonded to Ge by substitution of Pd sites in the Pd2Ge lattice. The role of the CoO layer in the oxygen evolution reaction (OER) has been verified by its selective removal using argon sputtering and conducting the OER on the etched catalyst. In situ X-ray absorption near-edge structure and extended X-ray absorption fine structure spectroscopy demonstrate that CoO gets transformed to CoOOH (Co3+) in operando condition with faster charge transfer through Pd atoms in the core Pd2Ge lattice. In situ Raman spectroscopy depicts the emergence of a CoOOH phase on applying potential and shows that the phase is stable with increasing potential and time without getting converted to CoO2. Density functional theory calculations indicate that the Pd2Ge lattice induces distortion in the CoO phase and generates unpaired spins in a nonmagnetic CoOOH system resulting in an increase in the OER activity and durability. The existence of spin density even after electrocatalysis is verified from electron paramagnetic resonance spectroscopy. We have thus successfully synthesized intermetallic supported CoO during synthesis and rigorously verified the role played by an intermetallic Pd2Ge core in enhancing charge transfer, generating spin density, improving electrochemical durability, and imparting mechanical stability to a thin CoOOH overlayer. Differential electrochemical mass spectrometry has been explored to visualize the instantaneous generation of oxygen gas during the onset of the reaction.

Organo-Functionalized Lacunary Double Cubane-Type Oxometallates: Synthesis, Structure, and Properties of [(MII Cl)2 (VIV O)2 {((HOCH2 CH2 )(H)N(CH2 CH2 O))(HN(CH2 CH2 O)2 )}2 ] (M=Co, Zn)

Organofunctionalized tetranuclear clusters [(MII Cl)2 (VIV O)2 {((HOCH2 CH2 )(H)N(CH2 CH2 O))(HN(CH2 CH2 O)2 )}2 ] (1, M=Co, 2: M=Zn) containing an unprecedented oxometallacyclic {M2 V2 Cl2 N4 O8 } (M=Co, Zn) framework have been prepared by solvothermal reactions. The new oxo-alkoxide compounds were fully characterized by spectroscopic methods, magnetic susceptibility measurement, DFT and ab initio computational methods, and complete single-crystal X-ray diffraction structure analysis. The isostructural clusters are formed of edge-sharing octahedral {VO5 N} and trigonal bipyramidal {MO3 NCl} units. Diethanolamine ligates the bimetallic lacunary double cubane core of 1 and 2 in an unusual two-mode fashion, unobserved previously. In the crystalline state, the clusters of 1 and 2 are joined by hydrogen bonds to form a three-dimensional network structure. Magnetic susceptibility data indicate weakly antiferromagnetic interactions between the vanadium centers [Jiso (VIV -VIV )=-5.4(1); -3.9(2) cm-1 ], and inequivalent antiferromagnetic interactions between the cobalt and vanadium centers [Jiso (VIV -CoII )=-12.6 and -7.5 cm-1 ] contained in 1.

One-pot self-assembled bimetallic sulfide particle cluster-supported three-dimensional graphene aerogel as an efficient electrocatalyst for the oxygen evolution reaction

The preparation of an electrocatalyst for the oxygen evolution reaction (OER) with high catalytic activity, good long-term durability and rapid reaction kinetics through interface engineering is of great significance. Herein, we have developed a bimetallic sulfide particle cluster-supported three-dimensional graphene aerogel (FeNiS@GA), which serves as an efficient electrocatalyst for OER, by a one-step hydrothermal method. Profiting from the synergy of the FeNiS particle cluster with high capacitance and GA with its three-dimensional porous nanostructure, FeNiS@GA shows a high specific surface area, large pore volume, low contact resistance, and decreases the electron and ion transport routes. FeNiS@GA exhibits outstanding OER activity (when the current density is 50 mA cm-2, the overpotential is 341 mV), low Tafel slope (63.87 mV dec-1) and remarkable stability in alkaline solutions, outperforming FeNiS, NiS@GA, FeS@GA and RuO2. Due to its simple synthesis process and excellent electrocatalytic performance, FeNiS@GA shows great potential to replace noble metal-based catalysts in practical applications.

Progress in Manipulating Dynamic Surface Reconstruction via Anion Modulation for Electrocatalytic Water Oxidation

The development of efficient and economical electrocatalysts for oxygen evolution reaction (OER) is of paramount importance for the sustainable production of renewable fuels and energy storage systems; however, the sluggish OER kinetics involving multistep four proton-coupled electron transfer hampers progress in these systems. Fortunately, surface reconstruction offers promising potential to improve OER catalyst design. Anion modulation plays a crucial role in controlling the extent of surface reconstruction and positively persuading the reconstructed species' performances. This review starts by providing a general explanation of how various types of anions can trigger dynamic surface reconstruction and create different combinations with pre-catalysts. Next, the influences of anion modulation on manipulating the surface dynamic reconstruction process are discussed based on the in situ advanced characterization techniques. Furthermore, various effects of survived anionic groups in reconstructed species on water oxidation activity are further discussed. Finally, the challenges and prospects for the future development directions of anion modulation for redirecting dynamic surface reconstruction to construct highly efficient and practical catalysts for water oxidation are proposed.

Cerium-Encapsulated SbIII-SeIV-Templating Polyoxotungstate for Electrochemically Sensing Human Multidrug Resistance Gene Segment

A tower-like SbIII-SeIV-templating polyoxotungstate [H2N(CH3)2]12Na7H3[Ce0.5/Na0.5(H2O)5]2[SbSe2W21O75]2·50H2O (1) was synthesized, whose skeleton is assembled from two prolonged lacunary Dawson [SbSe2W21O75]13- units and two [Ce0.5/Na0.5(H2O)5]2+ linkers. The uncommon [SbSe2W21O75]13- unit can be viewed as a combination of one [SeW6O21]2- group grafted onto a trivacant Dawson [SbSeW15O54]11- subunit. The conductive composite 1-Au@rGO containing 1, gold nanoparticles, and reduced graphene oxide (rGO) was conveniently prepared, using which the 1-Au@rGO-based electrochemical genosensor was constructed for detecting human multidrug resistance gene segment. This work enriches structural types of dual-heteroatom-inserted polyoxometalates and promotes the application of polyoxometalates in genosensors.

Ce-mediated molecular tailoring on gigantic polyoxometalate {Mo132} into half-closed {Ce11Mo96} for high proton conduction

Precise synthesis of polyoxometalates (POMs) is important for the fundamental understanding of the relationship between the structure and function of each building motif. However, it is a great challenge to realize the atomic-level tailoring of specific sites in POMs without altering the major framework. Herein, we report the case of Ce-mediated molecular tailoring on gigantic {Mo132}, which has a closed structural motif involving a never seen {Mo110} decamer. Such capped wheel {Mo132} undergoes a quasi-isomerism with known {Mo132} ball displaying different optical behaviors. Experiencing an 'Inner-On-Outer' binding process with the substituent of {Mo2} reactive sites in {Mo132}, the site-specific Ce ions drive the dissociation of {Mo2*} clipping sites and finally give rise to a predictable half-closed product {Ce11Mo96}. By virtue of the tailor-made open cavity, the {Ce11Mo96} achieves high proton conduction, nearly two orders of magnitude than that of {Mo132}. This work offers a significant step toward the controllable assembly of POM clusters through a Ce-mediated molecular tailoring process for desirable properties.

Reducing Systematic Uncertainty in Computed Redox Potentials for Aqueous Transition-Metal-Substituted Polyoxotungstates

Polyoxometalates have attracted significant interest owing to their structural diversity, redox stability, and functionality at the nanoscale. In this work, density functional theory calculations have been employed to systematically study the accuracy of various exchange-correlation functionals in reproducing experimental redox potentials, U0Red in [PW11M(H2O)O39]q- M = Mn(III/II), Fe(III/II), Co(III/II), and Ru(III/II). U0Red calculations for [PW11M(H2O)O39]q- were calculated using a conductor-like screening model to neutralize the charge in the cluster. We explicitly located K+ counterions which induced positive shifting of potentials by > 500 mV. This approximation improved the reproduction of redox potentials for Kx[XW11M(H2O)O39]q-x M = Mn(III/II)/Co(III/II). However, uncertainties in U0Red for Kx[PW11M(H2O)O39]q-x M = Fe(III/II)/Ru(III/II) were observed because of the over-stabilization of the ion-pairs. Hybrid functionals exceeding 25% Hartree-Fock exchange are not recommended because of large uncertainties in ΔU0Red attributed to exaggerated proximity of the ion-pairs. Our results emphasize that understanding the nature of the electrode and electrolyte environment is essential to obtain a reasonable agreement between theoretical and experimental results.

Dynamically Stabilized Electronic Regulation and Electrochemical Reconstruction in Co and S Atomic Pair Doped Fe3 O4 for Water Oxidation

The electronic regulation and surface reconstruction of earth-abundant electrocatalysts are essential to efficient oxygen evolution reaction (OER). Here, an inverse-spinel Co,S atomic pair codoped Fe3 O4 grown on iron foam (Co,S-Fe3 O4 /IF) is fabricated as a cost-effective electrocatalyst for OER. This strategy of Co and S atomic pair directional codoping features accelerates surface reconstruction and dynamically stabilizes electronic regulation. CoS atomic pairs doped in the Fe3 O4 crystal favor controllable surface reconstruction via sulfur leaching, forming oxygen vacancies and Co doping on the surface of reconstructed FeOOH (Co-FeOOH-Ov /IF). Before and after surface reconstruction via in situ electrochemical process, the Fe sites with octahedral field dynamically maintains an appropriate electronic structure for OER intermediates, thus exhibiting consistently excellent OER performance. The electrochemically tuned Fe-based electrodes exhibit a low overpotential of 349 mV at a current density of 1000 mA cm-2 , a slight Tafel slope of 43.3 mV dec-1 , and exceptional long-term electrolysis stability of 200 h in an alkaline medium. Density functional theory calculations illustrate the electronic regulation of Fe sites, changes in Gibbs free energies, and the breaking of the restrictive scaling relation between OER intermediates. This work provides a promising directional codoping strategy for developing precatalysts for large-scale water-splitting systems.

Sodium Tartrate-Assisted Synthesis of High-Purity NiFe2O4 Nano-Microrods Supported by Porous Ketjenblack Carbon for Efficient Alkaline Oxygen Evolution

Herein, a simple two-step synthetic method was developed for the synthesis of NiFe₂O₄ nano-microrods supported on Ketjenblack carbon (NiFe₂O₄/KB). A sodium tartrate-assisted hydrothermal method was employed for the synthesis of a NiFe-MOF/KB precursor, which was then pyrolyzed under N₂ at 500 °C to yield NiFe₂O₄/KB. Benefiting from the presence of high-valence Ni³⁺ and Fe³⁺, high conductivity, and a large electrochemically active surface area, NiFe₂O₄/KB delivered outstanding OER electrocatalytic performance under alkaline conditions, including a very low overpotential of 258 mV (vs RHE) at 10 mA cm^-2, a small Tafel slope of 43.01 mV dec^-1, and excellent durability in 1.0 M KOH. Density functional theory calculations verified the superior alkaline OER electrocatalytic activity of NiFe₂O₄ to IrO₂. While both catalysts possessed a similar metallic ground state, NiFe₂O₄ offered a lower energy barrier in the rate-determining OER step (*OOH → O₂) compared to IrO₂, resulting in faster OER kinetics.

Size-Controlled Synthesis of Luminescent Few-Atom Silver Clusters via Electron Transfer in Isostructural Redox-Active Porous Ionic Crystals

Ag clusters with a controlled number of atoms have received significant interest because they show size-dependent catalytic, optical, electronic, or magnetic properties. However, the synthesis of size-controlled, ligand-free, and air-stable Ag clusters with high yields has not been well-established. Herein, it is shown that isostructural porous ionic crystals (PICs) with redox-active polyoxometalates (POMs) can be used to synthesize Ag clusters via electron transfer from POMs to Ag⁺ . Ag clusters with average numbers of three, four, or six atoms emitting blue, green, or red colors, respectively, are formed and stabilized in the PICs under ambient conditions without any protecting ligands. The cluster size solely correlates with the degree of electron transfer, which is controlled by the reduction time and types of ions or elements of the PICs. Thus, advantages have been taken of POMs as electron sources and PICs as scaffolds to demonstrate a convenient method to obtain few-atom Ag clusters.

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.

Electrocatalytic activity of metal encapsulated, doped, and engineered fullerene-based nanostructured materials towards hydrogen evolution reaction

The utilization of nanostructured materials as efficient catalyst for several processes has increased tremendously, and carbon-based nanostructured materials encompassing fullerene and its derivatives have been observed to possess enhanced catalytic activity when engineered with doping or decorated with metals, thus making them one of the most promising nanocage catalyst for hydrogen evolution reaction (HER) during electro-catalysis. Prompted by these, and the reported electrochemical, electronic and stability advantage, an attempt is put forward herein to inspect the metal encapsulated, doped, and decorated dependent HER activity of C24 engineered nanostructured materials as effective electro-catalyst for HER. Density functional theory (DFT) calculations have been utilized to evaluate the catalytic hydrogen evolution reaction activity of four proposed bare systems: fullerene (C24), calcium encapsulated fullerene (CaencC24), nickel-doped calcium encapsulated fullerene (NidopCaencC24), and silver decorated nickel-doped calcium encapsulated (AgdecNidopCaencC24) engineered nanostructured materials at the TPSSh/GenECP/6-311+G(d,p)/LanL2DZ level of theory. The obtained results divulged that, a potential decrease in energy gap (Egap) occurred in the bare systems, while a sparing increase was observed upon adsorption of hydrogen onto the surfaces, these surfaces where also observed to maintain the least EH-L gap while the AgdecNidopCaencC24 surface exhibited an increased electrocatalytic activity when compared to others. The results also showed that the electronic properties of the systems evinced a correspondent result with their electrochemical properties, the Ag-decorated surface also exhibited a proficient adsorption energy [Formula: see text] and Gibb's free energy (ΔGH) value. The engineered Ag-decorated and Ni-doped systems were found to possess both good surface stability and excellent electro-catalytic property for HER activities.

Vanadium-substituted polycationic Al-oxo cluster in a porous ionic crystal exhibiting Lewis acidity

A vanadium-substituted polycationic Al-oxo cluster (Al28V4) in an all-inorganic porous ionic crystal exhibits Lewis acidity.