Trilayer Metal-Organic Frameworks as Multifunctional Electrocatalysts for Energy Conversion and Storage Applications

Integrated electrode design based on metal-organic frameworks for anion exchange membrane electrolyzers under high current densities

The development of efficient and durable electrodes is crucial for realizing industrialized hydrogen production via anion exchange membrane water electrolyzers (AEMWEs). However, limited attention has been given to preparing three-dimensional integrated electrodes through the coupling of gas diffusion layers and catalyst layers. Herein, an iron-cobalt (FeCo) gallate metal-organic framework (MOF) is controllably deposited on nickel foam (denotedas FeCo-gallatex/NF), serving as both the integrated cathode and anode of AEMWEs. These electrodes consist of MOF-coated catalyst layers and uncoated regions of the NF substrate serving as gas diffusion layers, where the anchored MOF material exhibits dual functionality as a catalyst for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This integrated electrode design significantly reduces the ohmic and mass transport resistances, while improving the kinetics. Consequently, the proposed electrode exhibits impressive performance for both OER and HER under alkaline conditions, enabling efficient overall water splitting. Additionally, the assembled AEMWEs achieve a small potential of only 1.63 V at 1 A cm-2, along with durable stability for 800 h at the same current density. This work provides an innovative idea for developing high-performance and durable electrodes of AEMWEs.

Spindle-shaped medium-entropy metal telluride nanostructures as high-performance dual-catalytic electrocatalysts for overall water splitting

The development of low-cost and high-activity electrocatalysts is crucial for clean energy production and sustainable development. In particular, non-noble-metal-based medium-entropy materials (MEMs) have recently attracted considerable attention because of their excellent electrocatalytic performance and have become a new research hotspot in the field of electrocatalysis. Additionally, the fewer main elements allow MEMs to be easily recycled and synthesized, with potential industrial applications. Inspired by these advantages, spindle-shaped (Fe2CoNi)Te2 medium-entropy metal telluride (METe) nanostructures were prepared via in situ Te doping during thermal treatment of metal-organic frameworks (MOFs). The resulting spindle-shaped (Fe2CoNi)Te2 METe prepared with an optimal ratio of Fe2CoNi-MOF and the tellurium powder exhibits excellent electrocatalytic activity and stability for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), achieving low overpotentials of 155 and 263 mV at 10 mA cm-2 for the HER and OER, respectively, and outstanding stability in 60 h tests. Density functional theory calculations demonstrate that the enhanced performance of the medium-entropy (Fe2CoNi)Te2 METe nanostructures is attributed to a significant increase in the surface charge density, a substantial increase in the *H adsorption/desorption ability and a remarkable reduction in the Gibbs free energy of the rate-determining step due to the d-band center being closer to the Fermi level. This study provides a feasible strategy for achieving efficient and low-cost electrocatalysts.

Nanostructured amorphous Ni-Co-Fe phosphide as a versatile electrocatalyst towards seawater splitting and aqueous zinc-air batteries

Electrocatalysis provides a desirable approach for moving toward a sustainable energy future. Herein, a rapid and facile potential pulse method was implemented for a one-pot electrosynthesis of the amorphous Ni-Co-Fe-P (NCFP) electrocatalyst. The 2 mg cm-2 loaded electrode displayed excellent trifunctional electrocatalytic activities toward the hydrogen evolution reaction (η HER j=10 = 102 mV), oxygen evolution reaction (η OER j=10 = 250 mV), and oxygen reduction reaction (E ORR 1/2 = 0.73 V) in alkaline solutions. Interestingly, even a lower overpotential of η HER j=10 = 86 mV was obtained at a super-high mass loading of 18.7 mg cm-2, demonstrating its feasibility for industrial-level applications. The NCFP electrocatalyst also offered superior catalytic activity in alkaline seawater electrolysis at industrially required current rates (500 mA cm-2). When implemented as an air cathode catalyst of an aqueous and quasi-solid state zinc-air battery, both devices delivered excellent performance. This study provides insights into a transformative technology towards a sustainable energy future.

Oxygen-Coordinated Single-Atom Nickel Catalysts Derived from Water-Induced Metal-Organic Framework Aerogel for Efficient Water Oxidation

Research on metal-organic framework (MOF) aerogels is relatively scarce, primarily constrained by the limited availability of synthetic methods. Herein, a water-induced rapid conversion process of MOF powder to MOF aerogel is demonstrated, where the macroscopic transition is essentially due to the reassembly of microscopic constituent units and the rapid alteration of morphological structure. The derived catalyst possesses abundant holes left by the acid leaching process, leading to the high enrichment of O-coordinated single-atom Ni sites on the concomitant carbon edges. Consequently, such a catalyst exhibits excellent catalytic activity for oxygen evolution reaction (OER) in alkaline media, only requiring a low overpotential of 279 mV to drive the benchmark current density of 10 mA cm-2. Density functional theory calculations further reveal the reduced OER energy barrier over the edge-enriched O-coordinated single-atom Ni sites, as compared with internal O-coordinated sites and traditional N-coordinated sites. This is primarily attributed to the optimization effect of distinctive O-coordinated structure and synergistic edge effect on the electronic structure of active Ni centers.

Serrated Leaf-Like N-Doped Copper Sulfide Enabling Bifunctional Oxygen Reduction/Evolution via Dual-Mode Cathode Reactions for High Energy Density and Cycle Stability in Zinc-Air Batteries

Zinc-air batteries (ZABs) are promising electrochemical energy storages, but inefficient oxygen reduction reaction (ORR) during discharging and oxygen evolution reaction (OER) during charging at their cathodes impede achieving high energy density and stable cycling. We report a serrated leaf-like nitrogen-doped copper sulfide (N-CuS) cathode with conductive N 2p-S 3p hybridized orbitals, oxygen-transporting mesopores, and about fivefold larger surface area than Cu. A ZAB with the N-CuS cathode exhibits a 788 mAh g-1 capacity (96% of theoretical) and a hitherto highest energy density of 916.0 Wh kg-1, surpassing one with the state-of-the-art Pt/C+RuO₂ cathode (712.43 mAh g-1 and 874 Wh kg-1). Density functional theory calculations elucidate that O═O bond dissociation is 0.97 eV more favorable on N-CuS than CuS. Subsequently, protonation of surface-adsorbed *O to *OH occurs via dissociate (0.55 V), non-spit associate (1.05 V), and split associate (1.05 V) pathways, with *OH then desorbing as OH-. Under anaerobic conditions, copper oxide transitions from CuO to Cu2O (1.05 V) and eventually to Cu (0.75 V) releasing oxygen to sustain ORR. Additionally, a ZAB with the N-CuS cathode achieves about threefold longer cyclability than one with the Pt/C+IrO₂ cathode, and about six-fold longer cyclability than one with the Pt/C+RuO₂ cathode.

Bimetallic Fe(OH)x@Co0.8Fe0.2-MOF/NF composites as effective electrocatalysts for the production of 2,5-furandicarboxylic acid from 5-hydroxymethylfurfural

A wide range of catalytic techniques have been explored for the use of biomass components. For example, the electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) can be performed with excellent energy efficiency under safe operating conditions and with fine control of the production parameters. Metal-organic framework (MOF) catalysts with active metal centres have been prepared as electrocatalysts for the oxidation of HMF to FDCA. A Fe(OH)x@Co0.8Fe0.2-MOF/nickel foam (NF) was made via two steps: Co0.8Fe0.2-MOF/NF was synthesized by in situ solvothermal methods followed by the electrodeposition of Fe(OH)x. X-ray photoelectron spectroscopy (XPS) analysis confirmed the successful electrodeposition of Fe(OH)x on Co0.8Fe0.2-MOF/Ni. Fe(OH)x@Co0.8Fe0.2-MOF/NF demonstrated enhanced electrocatalytic activity for the oxidation of HMF in 1M KOH, requiring an overpotential of 236 mV and 263 mV versus RHE to achieve current densities of 50 and 100 mA cm-2, respectively, with an apparent Tafel slope of 92 mV. The electrochemically active surface area of the catalysts showed that Fe(OH)x incorporated samples possessed a higher number of active sites compared to Co0.8Fe0.2-MOF/Ni, enhancing efficiency and improving the yield of 5-Hydroxymethylfurfural oxidation reaction (HMFOR).

Vibrational Property Tuning of MXenes Revealed by Sublattice N Reactivity in Polar and Nonpolar Solvents

MXenes, a family of two-dimensional (2D) materials based on transition metal carbides and nitrides, have desirable properties, such as high conductivity, high surface area, and tunable surface groups, for electrocatalysis. Nitride MXenes, in particular, have shown excellent electrocatalytic performance for the nitrogen and oxygen reduction reactions, but a fundamental understanding of how their structures evolve during electrocatalysis remains unknown. Equally important and yet unknown is the effect of the reactivity of the lattice nitrogen on the vibrational behavior of nitride MXenes and the resulting implications in electrocatalysis. Here, we investigate the reactivity of lattice nitrogen and the vibrational properties of titanium nitride MXenes in relevant electrocatalytic solvents using confocal Raman spectroscopy. We found that the vibrational modes of titanium nitride MXenes are attenuated in polar solvents, which is revealed through the alteration of the Raman scattering in solvents. Contrary to polar solvents, the vibrational modes remain unchanged in nonpolar solvents like hydrocarbons due to the inactivity of the lattice nitrogen. We found that this behavior is unique to nitrides because the Raman characteristics of carbides and sulfides are unaffected by the solvent types. However, the inclusion of nitrogen into the carbide structure does exhibit Raman-solvent behavior similar to that of nitrides, suggesting that replacing carbon with nitrogen affects MXene-light interactions. We demonstrated a proof-of-concept utilizing lattice nitrogen reactivity to enhance the electrocatalytic nitrogen reduction reaction for ammonia production. In summary, we elucidate the vibrational properties of nitride MXenes in solvents and demonstrate the tunability of MXene vibrational properties via lattice atom substitution, which in turn can be exploited to advance the applications of MXenes in electrocatalysis.

Creating Dual Active Sites in Ru-doped FeMn-MOF-74 for Efficient Overall Water Splitting

The design of well-engineered bifunctional electrocatalysts is crucial for achieving durable and efficient performance in overall water splitting. In this study, Ru-doped FeMn-MOF-74 itself has Ru sites and generates FeMnOOH under catalytic conditions, forming dual active sites for overall water splitting. Density functional theory (DFT) calculations demonstrate that the Ru dopants exhibit optimized binding strength for H* and enhanced hydrogen evolution reaction (HER) performance. Moreover, the Mn sites within FeMnOOH lower the energy barrier for the rate-determining step (from O* to OOH*), serving as the active centre for oxygen evolution reaction (OER). The incorporation of Ru significantly improves the electron transfer properties of FeMn-MOF-74 and enhances its water adsorption capacity, synergistically boosting its bifunctional activity. This strategy of designing dual active sites provides new insights into the development of bifunctional metal-organic frameworks (MOFs) for efficient overall water splitting.

Ultra-Wide Voltage Aqueous Superbatteries Enabled by Iron and Zinc Zeolitic Frameworks

Extensive research on supercapacitor-battery hybrid devices has bridged the gap between conventional batteries and supercapacitors. However, several challenges persist, including limited capacitance in the negative potential range, restricted rate capability, and a narrow potential window (<1.23 V) in aqueous electrolytes. Drawing inspiration from the notable benefits of bottom-up synthesis, which allows tailoring of structure and functionality through the selection of molecular components, we successfully synthesized an Fe-incorporated zeolitic imidazolate framework-8 (composed of Zn nodes and 2-methylimidazole linkers). Subsequently, the metal-organic framework was hydrothermally composited with graphene oxide in the presence of urea to prepare a dual metal oxide/N-doped reduced graphene oxide (DMO-NrGO) nanocomposite. Benefiting from the high hydrogen evolution overpotential of zinc-based compounds and the promising negative potential range activity of iron-based species, the lower potential limit of the X-ray confirmed crystalline-amorphous heterophase DMO-NrGO nanocomposite extends up to -1.45 V. It exhibits a specific capacity (capacitance) of 119 mA h g-1 (378 F g-1) at 1.0 A g-1 in 3.0 M KOH. Interestingly, the symmetric DMO-NrGO based superbattery device demonstrates an ultrawide voltage window of 1.95 V, with a superior specific energy of 28 W h kg-1 and an outstanding specific power of 29 kW kg-1 at 3.0 A g-1. The outstanding electrochemical performance can be attributed to the heterophase structure of the nanocomposite, which accommodates more active sites, provides additional ion transport channels, reduces phase-transformation resistance, and facilitates smooth electron transfer between metal oxides and graphene. This innovative synthetic strategy opens opportunities for developing high-performance aqueous energy storage devices.

Using Machine Learning to Design a FeMOF Bidirectional Regulator for Electrochemiluminescence Sensing of Tau Protein

The single-luminophore-based ratiometric electrochemiluminescence (ECL) sensor coupling bidirectional regulator has become a research hotspot in the detection field because of its simplicity and accuracy. However, the limited bidirectional regulator hinders its further development. In this study, by leveraging the robust predictive capabilities of machine learning, we prepared an Fe-based metal-organic framework (FeMOF) as a bidirectional regulator for modulating the dual-emission ECL signals of a single luminophore for the first time. The proof of concept was demonstrated by applying FeMOF to the classical luminophore Ru(bpy)32+, and the results showed its ability to enhance the cathode ECL signal (Ecathode) and inhibit the anode ECL signal (Eanode). As an example, a ratiometric ECL sensor for Tau protein (Tau) detection utilizing the FeMOF/Ru(bpy)32+ system was developed. The incorporation of a bidirectional regulator in the ECL system effectively mitigated erratic fluctuations or minor discrepancies between the two signals and showed a stronger correlation and stability of Ecathode/Eanode than before regulation. As a result, the ECL sensor showed good analytical performance with a detection limit as low as 3.38 fg mL-1 (S/N = 3). Moreover, it was not only comparable in test results to the commercially available ELISA kit but also could well distinguish between normal and Alzheimer's disease (AD) patients (80% specificity and 90% sensitivity). Thus, the proposed strategy is promising to be extended to other ECL luminophores or MOFs, providing a new path for ratiometric ECL sensors.

Gas-flow activation of MOFs: unlocking efficient catalysis through dynamic bonding

Metal-organic frameworks (MOFs), characterized by dynamic metal-ligand coordination bonding, have pivotal roles in catalysis, gas storage, and separation processes, owing to their open metal sites (OMSs). These sites, however, are frequently occupied by Lewis-base solvent molecules, necessitating activation to expose the OMSs for practical applications. Traditional thermal activation methods involve harsh conditions, risking structural integrity. This study presents a novel 'gas-flow activation' technique using inert gases like nitrogen and argon to eliminate these coordinating solvent molecules at low temperatures, thereby maintaining the structural integrity of MOFs. We specifically explored this method with HKUST-1, demonstrating that gas-flow activation at mild temperatures is not only feasible but also superior in efficiency compared to the conventional thermal methods. This approach highlights the potential for safer, more efficient activation processes in MOF applications, making it a valuable addition to the repertoire of MOF activation techniques. This activation function of inert gas flow allows HKUST-1 as a catalyst for the hydrogenation of acetophenone even at room temperature. In addition, it is demonstrated that this 'gas-flow activation' is broadly applicable in other MOFs such as MOF-14 and UTSA-76. Furthermore, the findings reveal that dynamic coordination bonding, the repeating transient dissociation-association of solvent molecules at OMSs, are key mechanisms in facilitating this activation, pointing towards new directions for designing activation strategies that prevent structural damage.

A Molecular Catalyst-Driven Sustainable Zinc-Air Battery Assembly

Bidirectional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalysts are key for molecular oxygen-centric renewable energy transduction via metal-air batteries. Here, a molecular cobalt complex is covalently tethered on a strategically functionalized silica surface that displayed both ORR and OER in alkaline media. The detailed X-ray absorbance spectroscopy (XAS) studies indicate that this catalyst retains its intrinsic molecular features while playing a central role during bidirectional electrocatalysis and demonstrating a relatively lower energy gap between O2/H2O interconversions. This robust molecular catalyst-silica composite (deposited on a porous carbon paper) is assembled along with a zinc foil and polymeric gel membrane to devise an active single-stack quasi-solid zinc-air battery (ZAB) setup. This quasi-solid ZAB assembly displayed impressive power density (60 mW cm-2@100 mA cm-2), specific capacity (818 mAh g-1@ 5mA cm-2), energy density (757 Whkg-1 @5mA cm-2), and elongated charging/discharging life (28 h). An appropriate assembly of these ZAB units is able to power practical electronic appliances, requiring ≈1.6-6.0V potential requirements.

Activation and Catalysis of Methane over Metal-Organic Framework Materials

Methane (CH4), which is the main component of natural gas, is an abundant and widely available carbon resource. However, CH4 has a low energy density of only 36 kJ L-1 under ambient conditions, which is significantly lower than that of gasoline (ca. 34 MJ L-1). The activation and catalytic conversion of CH4 into value-added chemicals [e.g., methanol (CH3OH), which has an energy density of ca. 17 MJ L-1], can effectively lift its energy density. However, this conversion is highly challenging due to the inert nature of CH4, characterized by its strong C-H bonds and high stability. Consequently, the development of efficient materials that can optimize the binding and activation pathway of CH4 with control of product selectivity has attracted considerable recent interest. Metal-organic framework (MOF) materials have emerged as particularly attractive candidates for the development of efficient sorbents and heterogeneous catalysts due to their high porosity, low density, high surface area and structural versatility. These properties enable MOFs to act as effective platforms for the adsorption, binding and catalytic conversion of CH4 into valuable chemicals. Recent reports have highlighted MOFs as promising materials for these applications, leading to new insights into the structure-activity relationships that govern their performance in various systems. In this Account, we present analysis of state-of-the-art MOF-based sorbents and catalysts, particularly focusing on materials that incorporate well-defined active sites within confined space. The precise control of these active sites and their surrounding microenvironment is crucial as it directly influences the efficiency of CH4 activation and the selectivity of the resulting chemical products. Our discussion covers key reactions involving CH4, including its activation, selective oxidation of CH4 to CH3OH, dry reforming of CH4, nonoxidative coupling of CH4, and borylation of CH4. We analyze the role of active sites and their microenvironment in the binding and activation of CH4 using a wide range of experimental and computational studies, including neutron diffraction, inelastic neutron scattering, and electron paramagnetic resonance, solid-state nuclear magnetic resonance, infrared and X-ray absorption spectroscopies coupled to density functional theory calculations. In particular, neutron scattering has notable advantages in elucidating host-guest interactions and the mechanisms of the conversion and catalysis of CH4 and CD4. In addition to exploring current advances, the limitations and future direction of research in this area are also discussed. Key challenges include improvements in the stability, scalability, and performance of MOFs under practical conditions, as well as achieving higher selectivity and yields of targeted products. The ongoing development of MOFs and related materials holds great promise for the efficient and sustainable utilization of CH4, transforming it from a low-density energy source into a versatile precursor for a wide range of value-added chemicals. This Account summarizes the design and development of functional MOF and related materials for the adsorption and conversion of CH4.

Two-Dimensional Layer {P4Mo6} Clusters Constructed with N-Ligands for Bifunctional Properties of Proton Conduction and Supercapacitors

Proton exchange membrane fuel cells (PEMFCs) are developing into very meaningful clean energy to fundamentally address environmental pollution. Among which the most studied Nafion series membranes are limited under large-scale use, and some strong oxidizing groups such as hydrogen peroxide will attack the structure of Nafion, shortening the lifespan of PEMFCs. Therefore, it is crucial to develop a proton-conductive material with strong stability and broad application. In this study, a novel hourglass-type P4Mo6-based POMOFs denoted as (H2timb)2[Mn3(H3P4Mo6O31)2]·4H2O was synthesized using 1,3,5-tri(1H-imidazole-1-yl)benzene (timb) as a ligand. It was found that CUST-577 exhibited an excellent proton conductivity of 8.9 × 10-3 S cm-1 at 80 °C and 98% RH (relative humidity), proving that CUST-577 was conducted by protons. In addition, CUST-577 also had a greater H2O2 decomposition ability, thereby improving the longevity of fuel cells. In a three-electrode system, CUST-577 displayed a specific capacitance (Cs) value of 308 F g-1 at a current density of 0.15 A g-1, with a capacitance retention of 88.3% after 2000 cycles. Since the proton-conductive electrolyte can deliver protons for the redox reaction of various pseudocapacitor (PC) electrode materials, CUST-577 may be a promising polyacid-based proton conductor material and PC electrode material.

Molybdenum Disulfide Induced Phase Control Synthesis of Multi-dimensional Co3S4-MoS2 Heteronanostructures via Cation Exchange

Phase control over cation exchange (CE) reactions has emerged as an important approach for the synthesis of nanomaterials (NMs), enabling precise determination of their reactivity and properties. Although factors such as crystal structure and morphology have been studied for the phase engineering of CE reactions in NMs, there remains a lack of systematic investigation to reveal the impact for the factors in heterogeneous materials. Herein, we report a molybdenum disulfide induced phase control method for synthesizing multidimensional Co3S4-MoS2 heteronanostructures (HNs) via cation exchange. MoS2 in parent Cu1.94S-MoS2 HNs are proved to affect the thermodynamics and kinetics of CE reactions, and facilitate the formation of Co3S4-MoS2 HNs with controlled phase. This MoS2 induced phase control method can be extended to other parent HNs with multiple dimensions, which shows its diversity. Further, theoretical calculations demonstrate that Co3S4 (111)/MoS2 (001) exhibits a higher adhesion work, providing further evidence that MoS2 enables phase control in the HNs CE reactions, inducing the generation of novel Co3S4-MoS2 HNs. As a proof-of-concept application for crystal phase- and dimensionality-dependent of cobalt sulfide based HNs, the obtained Co3S4-MoS2 heteronanoplates (HNPls) show remarkable performance in hydrogen evolution reactions (HER) under alkaline media. This synthetic methodology provides a unique design strategy to control the crystal structure and fills the gap in the study of heterogeneous materials on CE reaction over phase engineering that are otherwise inaccessible.

Rare-earth element doped NiFe-MOFs as efficient and robust bifunctional electrocatalysts for both alkaline freshwater and seawater splitting

Based on the target of carbon neutrality, it is very important to explore highly active and durable electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, a series of NiFe-based metal-organic frameworks (MOFs) with the doping of various rare-earth elements (Ce, Y, and La) were in situ grown on nickel foam by a facile solvothermal process. The representative CeNiFe-MOF showed amazing OER performance with ultralow overpotentials of 224 and 277 mV at 500 mA cm-2 in 1.0 M KOH and 1.0 M KOH + seawater, respectively. Moreover, it also exhibited favorable activity and durability for both alkaline freshwater and seawater splitting. Theoretical calculations unveiled that Ce doping effectively optimized the adsorption energy of H* and reduced the energy barrier from *OH to *O, thus leading to significant promotion of HER and OER performance. This work provided new inspiration for the electron modulation and activity optimization of MOF-based electrocatalysts.

Strong Bonding of Lattice N Activates Metal Ni to Achieve Efficient Water Splitting

Developing efficient and robust free-standing electrocatalysts for overall water splitting is a promising but challenging task. Herein, the N-incorporated Ni nanosheets non-fully encapsulated by N-doped carbon (NC) layer are fabricated (N─Ni©NC). The introduction of N not only regulates the size of nanosheets in N─Ni©NC but also promotes the electrochemical activity of metal Ni. Experimental and theoretical results reveal that strong bonding of the lattice N activates the inert metal Ni by promoting charge transfer between Ni and N. In addition, the upward shift of the d-band center induced by lattice N enhances the adsorption of intermediates, thereby making Ni as a new OER active site together with C. This strategy of generating Ni and C dual active sites by introducing lattice N greatly accelerates oxygen evolution reaction (OER) kinetics, resulting in excellent electrocatalytic performance of N─Ni©NC. At the current density of 10 mA cm-2, the overpotentials of hydrogen evolution reaction (HER) and OER are 27 and 206 mV, respectively, and the cell voltage for overall water splitting only needs 1.47 V. This work offers a unique heteroatom activation approach for designing free-standing electrodes with high activity.

Enhancing Oxygen Evolution Reaction Performance of Metal-Organic Frameworks through Cathode Activation

Due to their abundant active sites and porous structures, metal-organic frameworks (MOFs) have garnered significant interest as oxygen evolution reaction (OER) electrocatalysts. Nevertheless, the development of MOF s-based electrocatalysts with efficient OER activity and excellent stability simultaneously still face challenges. Herein, a cathodic activation strategy was used to enhance the OER electrocatalytic performance of M-HHTP for the first time, where M refers to Ni, Cu, Co, Fe, while HHTP denotes 2, 3, 6, 7, 10, 11-hexahydroxytriphenylene. As a prototype, the activated Ni-HHTP (HA-Ni-HHTP) demonstrates outstanding OER performance, with an overpotential as low as 140 mV at 20 mA cm-2 and a small Tafel slope of 78.7 mV-1, surpassing commercial RuO2 and rivaling state-of-the-art MOFs-based electrocatalysts. Characterizations and density functional theory calculations reveal that the superior performance of HA-Ni-HHTP is primarily ascribed to changes in semiconductor type, contact angle, and oxygen vacancy content induced by cathodic activation. Electrochemical impedance spectroscopy analysis using the transmission line model confirms that cathodic activation accelerates charge transport, enhancing the OER process. Furthermore, the cathodic activation strategy holds promise for improving the water oxidation performance of other MOFs such as Fe-HHTP, Co-HHTP, and Cu-HHTP.

Electronic transfer and structural reconstruction in porous NF/FeNiP-CoP@NC heterostructure for robust overall water splitting in alkaline electrolytes

Multimetal phosphides derived from metal-organic frameworks (MOFs) have garnered significant interest owing to their distinct electronic configurations and abundant active sites. However, developing robust and efficient catalysts based on metal phosphides for overall water splitting (OWS) remains challenging. Herein, we present an approach for synthesizing a self-supporting hollow porous cubic FeNiP-CoP@NC catalyst on a nickel foam (NF) substrate. Through ion exchange, the reconstruction chemistry transforms the FeNi-MOF nanospheres into intricate hollow porous FeNi-MOF-Co nanocubes. After phosphorization, numerous N, P co-doped carbon-coated FeNiP-CoP nanoparticles were tightly embedded within a two-dimensional (2D) carbon matrix. The NF/FeNiP-CoP@NC heterostructure retained a porous configuration, numerous heterogeneous interfaces, distinct defects, and a rich composition of active sites. Moreover, incorporating Co and the resulting structural evolution facilitated the electron transfer in FeNiP-CoP@NC, enhancing the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) processes. Consequently, the NF/FeNiP-CoP@NC catalyst demonstrated very low overpotentials of 78 mV for OER and 254 mV for HER in an alkaline medium. It also exhibited excellent long-term stability at various potentials (@10 mA cm-2, @20 mA cm-2, and @50 mA cm-2). As an overall water splitting cell, it required only 1.478 V to drive a current density of 50 mA cm-2 and demonstrated long-term stability. Density functional theory (DFT) calculations revealed a synergistic effect between multimetal phosphides, enhancing the intrinsic OER and HER activities of FeNiP-CoP@NC. This work not only elucidates the role of heteroatom induction in structural reconstruction but also highlights the importance of electronic structure modulation.

A Computation-Guided Design of Highly Defined and Dense Bimetallic Active Sites on a Two-Dimensional Conductive Metal-Organic Framework for Efficient H2O2 Electrosynthesis

Electrochemical synthesis of hydrogen peroxide (H2O2) via the two-electron oxygen reduction reaction (2e--ORR) provides an alternative method to the energy-intensive anthraquinone method. Metal macrocycles with precise coordination are widely used for 2e--ORR electrocatalysis, but they have to be commonly loaded on conductive substrates, thus exposing a large number of 2e--ORR-inactive sites that result in poor H2O2 production rate and efficiency. Herein, guided by first-principle predictions, a substrate-free and two-dimensional conductive metal-organic framework (Ni-TCPP(Co)), composed of CoN4 sites in porphine(Co) centers and Ni2O8 nodes, is designed as a multi-site catalyst for H2O2 electrosynthesis. The approperiate distance between the CoN4 and Ni2O8 sites in Ni-TCPP(Co) weakens the electron transfer between them, thus ensuring their inherent activities and creating high-density active sites. Meanwhile, the intrinsic electronic conductivity and porosity of Ni-TCPP(Co) further facilitate rapid reaction kinetics. Therefore, outstanding 2e--ORR electrocatalytic performance has been achieved in both alkaline and neutral electrolytes (>90 %/85 % H2O2 selectivity within 0-0.8 V vs. RHE and >18.2/18.0 mol g-1 h-1 H2O2 yield under alkaline/neutral conditions), with confirmed feasibility for water purification and disinfection applications. This strategy thus provides a new avenue for designing catalysts with precise coordination and high-density active sites, promoting high-efficiency electrosynthesis of H2O2 and beyond.

Electrodeposition of Ni/Cu Bimetallic Conductive Metal-Organic Frameworks Electrocatalysts with Boosted Oxygen Reduction Activity for Zinc-Air Batteries

Zinc-air batteries employing non-Pt cathodes hold significant promise for advancing cathodic oxygen reduction reaction (ORR). However, poor intrinsic electrical conductivity and aggregation tendency hinder the application of metal-organic frameworks (MOFs) as active ORR cathodes. Conductive MOFs possess various atomically dispersed metal centers and well-aligned inherent topologies, eliminating the additional carbonization processes for achieving high conductivity. Here, a novel room-temperature electrochemical cathodic electrodeposition method is introduced for fabricating uniform and continuous layered 2D bimetallic conductive MOF films cathodes without polymeric binders, employing the organic ligand 2,3,6,7,10,11-hexaiminotriphenylene (HITP) and varying the Ni/Cu ratio. The influence of metal centers on modulating the ORR performance is investigated by density functional theory (DFT), demonstrating the performance of bimetallic conductive MOFs can be effectively tuned by the unpaired 3d electrons and the Jahn-Teller effect in the doped Cu. The resulting bimetallic Ni2.1Cu0.9(HITP)2 exhibits superior ORR performance, boasting a high onset potential of 0.93 V. Moreover, the assembled aqueous zinc-air battery demonstrates high specific capacity of 706.2 mA h g-1, and exceptional long-term charge/discharge stability exceeding 1250 cycles.

N-Doped Carbon Modified (NixFe1-x)Se Supported on Vertical Graphene toward Efficient and Stable OER Performance

NiFe-based nanomaterials are extensively studied as one of the promising candidates for the oxygen evolution reaction (OER). However, their practical application is still largely impeded by the unsatisfied activity and poor durability caused by the severe leaching of active species. Herein, a rapid and facile combustion method is developed to synthesize the vertical graphene (VG) supported N-doped carbon modified (NixFe1-x)Se composites (NC@(NixFe1-x)Se/VG). The interconnected heterostructure of obtained materials plays a vital role in boosting the catalytic performance, offering rich active sites and convenient pathways for rapid electron and ion transport. The incorporation of Se into NiFe facilitates the formation of active species via in situ surface reconstruction. According to density functional theory (DFT) calculations, the in situ formation of a Ni0.75Fe0.25Se/Ni0.75Fe0.25OOH layer significantly enhances the catalytic activity of NC@(NixFe1-x)Se/VG. Furthermore, the surface-adsorbed selenoxide species contribute to the stabilization of the catalytic active phase and increase the overall stability. The obtained NC@(NixFe1-x)Se/VG exhibits a low overpotential of 220 mV at 20 mA cm-2 and long-term stability over 300 h. This work offers a novel perspective on the design and fabrication of OER electrocatalysts with high activity and stability.

Bimetallic MOF-derived three-dimensional nanoflowers PdCoOx as peroxidase mimic activity for determining total antioxidant capacity

Bimetallic MOF derivatives have shown excellent performance as nano-enzymes in the field of catalysis. Herein, PdCo oxide nanoflowers with three-dimensional flower were prepared by a simple pyrolysis method on a precursor of bimetallic PdCo-MOF. PdCoOx showed excellent peroxidase mimic activity, which could significantly promote the oxidation of TMB by H2O2. Compared with CoOx, the peroxidase mimic activity of the optimized PdCoOx-300 increased by 2.41-fold. PdCoOx-300 has high affinity for TMB and H2O2 with Km values of 0.16 mM and 2.11 mM, which are only 57.03% and 36.87% of HRP, respectively. The highly specific peroxidase mimic activity is conducive to the sensitive detection of H2O2, glucose and ascorbic acid with limit of detection of 10, 100 and 10 nM, respectively. Furthermore, the total antioxidant capacity in the actual beverage samples was conducted, which showed good anti-interference ability and recovery rate.

Ce-4f as an electron-modulation reservoir weakening Fe-O bond to induce iron vacancies in CeFevNi hydroxide for enhancing oxygen evolution reaction

Designing novel rare-earth-transition metal composites is at the forefront of electrocatalyst research. However, the modulation of transition metal electronic structures by rare earths to induce vacancy defects and enhance electrochemical performance has rarely been reported. In this study, we systematically investigate the mechanism by which Ce-4f electron modulation weakens the Fe-O bond, thereby altering the electronic structure in CeFevNi hydroxide to improve oxygen evolution reaction (OER) performance. Theoretical calculations and experimental characterizations reveal that Ce-4f orbitals function as electron-modulation reservoirs, capable not only of retaining or donating electrons but also of influencing the material's electronic structure. Moreover, Ce-4f bands optimize the Fe lower Hubbard bands (LHB) and O-2p bands, leading to weakened Fe-O bonds and the formation of cationic vacancies. This change results in the upshift of the d-band center at the active sites, favoring the reaction energy barrier for oxygen intermediates in the OER process. The synthesized catalyst demonstrated an overpotential of 201 mV at 10 mA cm-2 and a lifetime exceeding 200 h at 100 mA cm-2 under alkaline conditions. This work offers a proof-of-concept for the application of the mechanism of rare earth-induced transition metal vacancy defects, providing a general guideline for the design and development of novel highly efficient catalysts.

MOF-on-MOF Heterostructured Electrocatalysts for Efficient Nitrate Reduction to Ammonia

Electrocatalytic nitrate reduction reaction (NO3 -RR) is an important route for sustainable NH3 synthesis and environmental remediation. Metal-organic frameworks (MOFs) are one family of promising NO3 -RR electrocatalysts, however, there is plenty of room to improve in their performance, calling for new design principles. Herein, a MOF-on-MOF heterostructured electrocatalyst with interfacial dual active sites and build-in electric field is fabricated for efficient NO3 -RR to NH3 production. By growing Co-HHTP (HHTP=2,3,6,7,10,11-hexahydroxytriphenylene) nanorods on Ni-BDC (BDC=1,4-benzenedicarboxylate) nanosheets, experimental and theoretical investigations demonstrate the formation of Ni-O-Co bonds at the interface of MOF-on-MOF heterostructure, leading to dual active sites tailed for NO3 -RR. The Ni sites facilitate the adsorption and activation of NO3 -, while the Co sites boost the H2O decomposition to supply active hydrogen (Hads) for N-containing intermediates hydrogenation on adjacent Ni sites, cooperatively reducing the energy barriers of NO3 -RR process. Together with the accelerated electron transfer enabled by built-in electric field, remarkable NO3 -RR performance is achieved with an NH3 yield rate of 11.46 mg h-1 cm-2 and a Faradaic efficiency of 98.4 %, outperforming most reported MOF-based electrocatalysts. This work provides new insights into the design of high-performance NO3 -RR electrocatalysts.

Platinum/Platinum Sulfide on Sulfur-Doped Carbon Nanosheets with Multiple Interfaces toward High Hydrogen Evolution Activity

Platinum (Pt)-based materials are among the most competitive electrocatalysts for the hydrogen evolution reaction (HER) due to suitable hydrogen adsorption energy. Due to the rarity of Pt, it is desirable to develop cost-effective Pt-based electrocatalysts with low Pt loading. Herein, Pt/PtS electrocatalysts on S-doped carbon nanofilms (PPS/C) have been successfully fabricated through a precursor reduction route with a complex of Pt and 1-dodecanethiol (1-DDT) as the precursor. The PPS/C achieved at 400 °C (PPS/C-400) exhibits excellent HER performances with an ultralow overpotential of 41.3 mV, a low Tafel slope of 43.1 mV dec-1 at a current density of 10 mA cm-2, and a long-term stability of 10 h, superior to many recently reported Pt-based HER electrocatalysts. More importantly, PPS/C-400 shows a high mass-specific activity of 0.362 A mgPt-1 at 30 mV, which is 1.88 times of that of commercial 20% Pt/C (0.193 A mgPt-1). The introduction of sulfur leads to the formation of PtS, which not only reduces the content of Pt but also realizes the interface regulation of Pt/PtS, as well as the doping of carbon. Both regulations make the resulting catalyst have abundant active centers and rapid electron transfer/transport, which is conducive to balancing the adsorption and resolution of intermediate products, and finally achieving great mass-specific activity and stability. The research work may provide ideas for designing effective Pt-based multi-interface electrocatalysts.

Ni-doping optimized d-band center in bifunctional Fe2O3 modified by bamboo-like NCNTs as a cathode material for Zn-air batteries

During the development of Zn-air batteries, designing an affordable, efficient and stable electrocatalyst for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) presents a great challenge. Fe2O3 exhibits ORR and OER activities, but when used as a cathode material in Zn-air batteries, its activity requires further improvement. To achieve this goal, Ni is doped into Fe2O3 hexagonal nanorods, derived from a metal-organic framework (MOF) precursor, and further modified by N-doped carbon nanotubes. In ORR, its half-wave potential achieves 0.946 and 0.716 V in alkaline and neutral electrolytes, respectively. In OER, it requires 388 mV to obtain 10 mA cm-2 in an alkaline electrolyte. As illustrated by theoretical calculation, Ni-doping raises the d-band center of Fe2O3, which enhances its adsorption towards relevant oxygen species in electrocatalysis. This improves its ORR and OER activities. Based on these merits, the Zn-air battery is assembled with an alkaline electrolyte. At 10 mA cm-2, its specific capacity and energy density reach 819.8 mA h g-1 and 960.1 W h kg-1, respectively. This battery remains stable after a long time of charge and discharge. In neutral electrolytes, its promising discharge performance is also well retained. This work develops an effective approach to improve ORR and OER activities of Fe2O3-based cathode materials in Zn-air batteries.

Confined Growth of Highly Ordered Metal Atomic Arrays for Seawater Oxidation

Metal atom catalysts have been among the most important research objects due to their specific physical and chemical properties. However, precise control of the anchoring of metal atoms is still challenging to achieve. Cobalt and iridium atomic arrays formed sequentially ordered stable arrays in graphdiyne (GDY) triangular cavities depending on their intrinsic chemical properties and interactions. The success of this method was attributed to multifunctional integration of GDY, enabling selective growth from one to several atoms and various atomic densities. The bimetallic atom arrays show several advantages resulting from reducibility of acetylene bonds, space limiting effect, incomplete charge transfer between GDY and metal atoms, and sp-C hybridized triple bond skeleton. This well-designed system exhibits unprecedented oxygen evolution reaction (OER) performance with a mass activity of 2.6 A mgcat. -1 at a low overpotential of 300 mV, which is 216.6 times higher than the state-of-the-art IrO2 catalyst, and long-term stability.

Lattice Oxygen Activation through Deep Oxidation of Co4N by Jahn-Teller-Active Dopants for Improved Electrocatalytic Oxygen Evolution

Triggering the lattice oxygen oxidation mechanism is crucial for improving oxygen evolution reaction (OER) performance, because it could bypass the scaling relation limitation associated with the conventional adsorbate evolution mechanism through the direct formation of oxygen-oxygen bond. High-valence transition metal sites are favorable for activating the lattice oxygen, but the deep oxidation of pre-catalysts suffers from a high thermodynamic barrier. Here, taking advantage of the Jahn-Teller (J-T) distortion induced structural instability, we incorporate high-spin Mn3+ (t 2 g 3 e g 1 ${{t}_{2g}^{3}{e}_{g}^{1}}$ ) dopant into Co4N. Mn dopants enable a surface structural transformation from Co4N to CoOOH, and finally to CoO2, as observed by various in situ spectroscopic investigations. Furthermore, the reconstructed surface on Mn-doped Co4N triggers the lattice oxygen activation, as evidenced experimentally by pH-dependent OER, tetramethylammonium cation adsorption and online electrochemical mass spectrometry measurements of 18O-labelled catalysts. In general, this work not only offers the introducing J-T effect approach to regulate the structural transition, but also provides an understanding about the influence of the catalyst's electronic configuration on determining the reaction route, which may inspire the design of more efficient catalysts with activated lattice oxygen.

Self-etching assembly of designed NiFeMOF nanosheet arrays as high-efficient oxygen evolution electrocatalyst for water splitting

2D metal-organic frameworks (MOFs) have emerged as potential candidates for electrocatalytic oxygen evolution reactions (OER) due to their inherent properties like abundant coordination unsaturated active sites and efficient charge transfer. Herein, a versatile and massively synthesizable self-etching assembly strategy wherein nickel-iron foam (NFF) acts as a substrate and a metal ion source. Specifically, by etching the nickel-iron foam (NFF) surface using ligands and solvents, Ni/Fe metal ions are activated and subsequently reacted under hydrothermal conditions, resulting in the formation of self-supporting nanosheet arrays, eliminating the need for external metal salts. The obtained 33 % NiFeMOF/NFF exhibits remarkable OER performance with ultra-low overpotentials of 188/231 mV at 10/100 mA cm-2, respectively, outperforming most recently reported catalysts. Besides, the built 33 % NiFeMOF/NFF(+)||Pt/C(-) electrolyzer presents low cell voltages of 1.55/1.83 V at 10/100 mA cm-2, superior to the benchmark RuO2 (+)||Pt/C(-), implying good industrialization prospects. The excellent catalytic activity stems from the modulation of the electronic spin state of the Ni active site by the introduction of Fe, which facilitates the adsorption process of oxygen-containing intermediates and thus enhances the OER activity. This innovative approach offers a promising pathway for commercial-scale sustainable energy solutions.

Sonication-Induced Boladipeptide-Based Metallogel as an Efficient Electrocatalyst for the Oxygen Evolution Reaction

Bioinspired, self-assembled hybrid materials show great potential in the field of energy conversion. Here, we have prepared a sonication-induced boladipeptide (HO-YF-AA-FY-OH (PBFY); AA = Adipic acid, F = l-phenylalanine, and Y = l-tyrosine) and an anchored, self-assembled nickel-based coordinated polymeric nanohybrid hydrogel (Ni-PBFY). The morphological studies of hydrogels PBFY and Ni-PBFY exhibit nanofibrillar network structures. XPS analysis has been used to study the self-assembled coordinated polymeric hydrogel Ni-PBFY-3, with the aim of identifying its chemical makeup and electronic state. XANES and EXAFS analyses have been used to examine the local electronic structure and coordination environment of Ni-PBFY-3. The xerogel of Ni-PBFY was used to fabricate the electrodes and is utilized in the OER (oxygen evolution reaction). The native hydrogel (PBFY) contains a gelator boladipeptide of 15.33 mg (20 mmol L-1) in a final volume of 1 mL. The metallo-hydrogel (Ni-PBFY-3) is prepared by combining 15.33 mg (20 mmol L-1) of boladipeptide (PBFY) with 3 mg (13 mmol L-1) of NiCl2·6H2O metal in a final volume of 1 mL. It displays an ultralow Tafel slope of 74 mV dec-1 and a lower overpotential of 164 mV at a 10 mA cm-2 current density in a 1 M KOH electrolyte, compared to other electrocatalysts under the same experimental conditions. Furthermore, the Ni-PBFY-3 electrocatalyst has been witnessed to be highly stable during 100 h of chronopotentiometry performance. To explore the OER mechanism in an alkaline medium, a theoretical calculation was carried out by employing the first-principles-based density functional theory (DFT) method. The computed results obtained by the DFT method further confirm that the Ni-PBFY-3 electrocatalyst has a high intrinsic activity toward the OER, and the value of overpotential obtained from the present experiment agrees well with the computed value of the overpotential. The biomolecule-assisted electrocatalytic results provide a new approach for designing efficient electrocatalysts, which could have significant implications in the field of green energy conversion.

Superstructured Carbon with Enhanced Kinetics for Zinc-Air Battery and Self-Powered Overall Water Splitting

The present study proposes a novel engineering concept for the customization of functionality and construction of superstructure to fabricate 2D monolayered N-doped carbon superstructure electrocatalysts decorated with Co single atoms or Co2P nanoparticles derived from 2D bimetallic ZnCo-ZIF superstructure precursors. The hierarchically porous carbon superstructure maximizes the exposure of accessible active sites, enhances electron/mass transport efficiency, and accelerates reaction kinetics simultaneously. Consequently, the Co single atoms embedded N-doped carbon superstructure (Co-NCS) exhibits remarkable catalytic activity toward oxygen reduction reaction, achieving a half-wave potential of 0.886 V versus RHE. Additionally, the Co2P nanoparticles embedded N-doped carbon superstructure (Co2P-NCS) demonstrates high activity for both oxygen evolution reaction and hydrogen evolution reaction, delivering low overpotentials of 292 mV at 10 mA cm-2 and 193 mV at 10 mA cm-2 respectively. Impressively, when employed in an assembled rechargeable Zn-air battery, the as-prepared 2D carbon superstructure electrocatalysts exhibit exceptional performance with a peak power density of 219 mW cm-2 and a minimal charge/discharge voltage gap of only 1.16 V at 100 mA cm-2. Moreover, the cell voltage required to drive an overall water-splitting electrolyzer at a current density of 10 mA cm-2 is merely 1.69 V using these catalysts as electrodes.

Metal-Organic Framework (MOF)-Based Clean Energy Conversion: Recent Advances in Unlocking its Underlying Mechanisms

Carbon neutrality is an important goal for humanity . As an eco-friendly technology, electrocatalytic clean energy conversion technology has emerged in the 21st century. Currently, metal-organic framework (MOF)-based electrocatalysis, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), hydrogen oxidation reaction (HOR), carbon dioxide reduction reaction (CO2RR), nitrogen reduction reaction (NRR), are the mainstream energy catalytic reactions, which are driven by electrocatalysis. In this paper, the current advanced characterizations for the analyses of MOF-based electrocatalytic energy reactions have been described in details, such as density function theory (DFT), machine learning, operando/in situ characterization, which provide in-depth analyses of the reaction mechanisms related to the above reactions reported in the past years. The practical applications that have been developed for some of the responses that are of application values, such as fuel cells, metal-air batteries, and water splitting have also been demonstrated. This paper aims to maximize the potential of MOF-based electrocatalysts in the field of energy catalysis, and to shed light on the development of current intense energy situations.

Novel application of imidazole-based ligand-templated borates in a zinc-air battery

Two templated borates, [Co(1-EI)2]·[B5O7(OH)3] (1) and [Ga(1-MI)2·B6O9(OH)4]·[H3BO3]·H[1-MI] (2), have been synthesized using a mild method. Notably, they exhibit an excellent ORR performance with an E1/2 value of 0.84 V and are the first to be used as the positive electrode catalyst for a zinc-air battery, which opens a pathway for the application of borate-based oxide catalysts.

Synergistic vacancy engineering of Co/MnO@NC catalyst for superior oxygen reduction reaction in liquid/solid zinc-air batteries

The pursuit of efficient and economically viable catalysts for liquid/solid-state zinc-air batteries (ZABs) is of paramount importance yet presents formidable challenge. Herein, we synthesized a vacancy-rich cobalt/manganese oxide catalyst (Co/MnO@NC) stabilized on a nitrogen-doped mesoporous carbon (NC) nanosphere matrix by leveraging hydrothermal and high-temperature pyrolysis strategy. The optimized Co/MnO@NC demonstrates fast reaction kinetics and large limiting current densities comparable to commercial Pt/C in alkaline electrolyte for oxygen reduction reaction (ORR). Moreover, the Co/MnO@NC serves as an incredible cathode material for both liquid and flexible solid-state ZABs, delivering impressive peak power densities of 217.7 and 63.3 mW cm-2 and robust long-term stability (459 h), outperforming the state-of-the-art Pt/C and majority of the currently reported catalysts. Research indicates that the superior performance of the Co/MnO@NC catalyst primarily stems from the synergy between the heightened electrical conductivity of metallic Co and the regulatory capacity of MnO on adsorbed oxygen intermediates. In addition, the abundance of vacancies regulates the electronic configuration, and superhydrophilicity facilitates efficient electrolyte diffusion, thereby effectively ensuring optimal contact between the active site and reactants. Besides, the coexisting NC layer avoids the shedding of active sites, resulting in high stability. This work provides a viable approach for designing and advancing high-performance liquid/solid-state ZABs, highlighting the great potential of energy storage technology.

Three-dimensional flower-like Ni-S/Co-MOF grown on Ni foam as a bifunctional electrocatalyst for efficient overall water splitting

Poor conductivity of the metal-organic frameworks (MOFs) limits their applications in overall water splitting. Surface sulfur (S) doping transition metal hydroxides would effectively improve the conductivity and adjust the electronic structure to generate additional electroactive sites. Herein, we fabricated a Ni-S/Co-MOF/NF catalyst by electroplating a Ni-S film on the 3D flower-like Co-MOF. Because the 3D flower-like structures are covered in Ni foam, the high exposure of active sites and good conductivity are obtained. Moreover, the synergistic effect between Ni-S and Co-MOF contributes to the redistribution of electrons in the catalyst, which can then optimize the catalytic performance of the material. The obtained 3D flower-like Ni-S/Co-MOF/NF demonstrates excellent activity toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) in 1 M KOH, which only requires a low overpotential of 248 mV@10 mA cm-2 for the OER and 127 mV@10 mA cm-2 for the HER, respectively. At a current density of 10 mA cm-2, the Ni-S/Co-MOF/NF‖Ni-S/Co-MOF/NF requires a low cell voltage of 1.59 V to split overall water splitting.

Intrinsic Specific Activity Enhancement for Bifunctional Electrocatalytic Activity toward Oxygen and Hydrogen Evolution Reactions via Structural Modification of Nickel Organophosphonates

A comprehensive knowledge of the structure-activity relationship of the framework material is decisive to develop efficient multifunctional electrocatalysts. In this regard, two different metal organophosphonate compounds, [Ni(Hhedp)2]·4H2O (I) and [Ni3(H3hedp)2(C4H4N2)3]·6H2O (II) have been isolated through one-pot hydrothermal strategy by using H4hedp (1-hydroxyethane 1,1-diphosphonic acid) and N-donor auxiliary ligand (pyrazine; C4H4N2). The structures of synthesized materials have been established through single-crystal X-ray diffraction studies, which confirm that compound I formed a one-dimensional molecular chain structure, while compound II exhibited a three-dimensional extended structure. Further, the crystalline materials have participated as efficient electrocatalysts for the oxygen evolution and hydrogen evolution reactions (OER and HER) as compared to the state-of-the-art electrocatalyst RuO2. The electrocatalytic OER and HER performances show that compound II displayed better electrocatalytic performances toward OER (η10 = 305 mV) and HER (η10 = 230 mV) in alkaline (1 M KOH) and acidic (0.5 M H2SO4) media, respectively. Substantially, the specific activity has been assessed in order to measure the inherent electrocatalytic activity of the title electrocatalyst, which displays an enrichment of fourfold higher activity of compound II (0.64 mA/cm2) than compound I (0.16 mA/cm2) for the OER experiments. Remarkably, inclusion of an auxiliary pyrazine ligand into the metal organophosphonate structure (compound II) not only offers higher dimensionality along with significant enhancement of the overall bifunctional electrocatalytic performances but also improves the long-term stability, which is noteworthy for the family of hybrid framework materials.

Regulating the Electronic Structure of Metal-Organic Frameworks by Introducing Mn for Enhanced Oxygen Evolution Activity

The construction of low-cost and highly efficient oxygen evolution electrocatalysts is paramount for clean and sustainable hydrogen energy. In recent years, metal-organic framework (MOF) OER electrocatalysts have attracted tremendous research attention. Herein, we report a simple and facile strategy to construct bimetallic MOFs (named CoMn0.01) for enhancing OER catalytic performance. Significantly, CoMn0.01 exhibited remarkable OER activity (255 mV at 10 mA cm-2) and a low Tafel slope of 66 mV dec-1, superior to those of commercial benchmark electrocatalysts (RuO2, 352 mV, 178 mV dec-1). Besides, the catalyst demonstrated outstanding longevity for 144 h at a current density of 100 mA cm -2. Mn doping can regulate the electronic structure of Co MOFs, which optimizes charge transfer capability and improves conductivity.

Engineering organic polymers as emerging sustainable materials for powerful electrocatalysts

Cost-effective and high-efficiency catalysts play a central role in various sustainable electrochemical energy conversion technologies that are being developed to generate clean energy while reducing carbon emissions, such as fuel cells, metal-air batteries, water electrolyzers, and carbon dioxide conversion. In this context, a recent climax in the exploitation of advanced earth-abundant catalysts has been witnessed for diverse electrochemical reactions involved in the above mentioned sustainable pathways. In particular, polymer catalysts have garnered considerable interest and achieved substantial progress very recently, mainly owing to their pyrolysis-free synthesis, highly tunable molecular composition and microarchitecture, readily adjustable electrical conductivity, and high stability. In this review, we present a timely and comprehensive overview of the latest advances in organic polymers as emerging materials for powerful electrocatalysts. First, we present the general principles for the design of polymer catalysts in terms of catalytic activity, electrical conductivity, mass transfer, and stability. Then, the state-of-the-art engineering strategies to tailor the polymer catalysts at both molecular (i.e., heteroatom and metal atom engineering) and macromolecular (i.e., chain, topology, and composition engineering) levels are introduced. Particular attention is paid to the insightful understanding of structure-performance correlations and electrocatalytic mechanisms. The fundamentals behind these critical electrochemical reactions, including the oxygen reduction reaction, hydrogen evolution reaction, CO2 reduction reaction, oxygen evolution reaction, and hydrogen oxidation reaction, as well as breakthroughs in polymer catalysts, are outlined as well. Finally, we further discuss the current challenges and suggest new opportunities for the rational design of advanced polymer catalysts. By presenting the progress, engineering strategies, insightful understandings, challenges, and perspectives, we hope this review can provide valuable guidelines for the future development of polymer catalysts.

Heterostructured Bimetallic MOF-on-MOF Architectures for Efficient Oxygen Evolution Reaction

Electron modulation presents a captivating approach to fabricate efficient electrocatalysts for the oxygen evolution reaction (OER), yet it remains a challenging undertaking. In this study, an effective strategy is proposed to regulate the electronic structure of metal-organic frameworks (MOFs) by the construction of MOF-on-MOF heterogeneous architectures. As a representative heterogeneous architectures, MOF-74 on MOF-274 hybrids are in situ prepared on 3D metal substrates (NiFe alloy foam (NFF)) via a two-step self-assembly method, resulting in MOF-(74 + 274)@NFF. Through a combination of spectroscopic and theory calculation, the successful modulation of the electronic property of MOF-(74 + 274)@NFF is unveiled. This modulation arises from the phase conjugation of the two MOFs and the synergistic effect of the multimetallic centers (Ni and Fe). Consequently, MOF-(74 + 274)@NFF exhibits excellent OER activity, displaying ultralow overpotentials of 198 and 223 mV at a current density of 10 mA cm-2 in the 1.0 and 0.1 M KOH solutions, respectively. This work paves the way for manipulating the electronic structure of electrocatalysts to enhance their catalytic activity.

CoFe Alloys Dispersed on Se, N Co-Doped Graphitic Carbon as Efficient Bifunctional Catalysts for Zn-Air Batteries

The development of a stable and efficient non-noble metal catalyst with both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is paramount to achieving the widespread application of Zn-air batteries (ZABs) but remains a great challenge. Herein, a novel Co3 Fe7 alloy nanoparticle dispersed on Se, N co-doped graphitic carbon (denoted as CoFe/Se@CN) was prepared through a facile hydrothermal and pyrolysis process. The synthesized CoFe/Se@CN exhibits outstanding ORR and OER properties with an ultralow potential gap of 0.625 V, which is mainly attributed to the abundant porous structure, the rich structural defects formed by doping Se atoms, and the strong synergistic effects between the CoFe alloys and graphitic carbon nanosheet. Furthermore, the ZAB fabricated by CoFe/Se@CN shows a high peak power density of 160 mW cm-2 and a large specific capacity of 802 mA h g-1 with favorable cycling stability, outperforming that of Pt/C+RuO2 . Our study offers a plausible strategy to explore bifunctional carbon-based materials with efficient electrocatalytic properties for rechargeable ZABs.

Recent advances in metal-organic frameworks: Synthesis, application and toxicity

Metal-organic frameworks (MOFs) are a new class of crystalline porous hybrid materials with high porosity, large specific surface area and adjustable channel structure and biocompatibility, which are being investigated with increasing interest for energy storage and conversion, gas adsorption/separation, catalysis, sensing and biomedicine. However, the practical applications of MOFs make them release into the environment inevitable, posing a threat to humans and organisms. In this article, we cover advances in the currently available MOFs synthesis methods and the emerging applications of MOFs, especially in the biomedical field (therapeutic agents and bioimaging). Additionally, after evaluating the current status of main exposure routes and affecting factors in the field of MOFs-toxicity, the molecular mechanism is also clarified and identified. Knowledge gaps are identified from such a summarization and frontier development are explored for MOFs. Afterwards, we also present the limitations, challenges, and future perspectives in the study of the entire life cycle of MOFs. This review emphasizes the need for a more targeted discussion of the latest, widely used and effective versatile material class in order to exploit the full potential of high-performance and non-toxicity MOFs in the future.

A Multifunctional Co-Based Metal-Organic Framework as a Platform for Proton Conduction and Ni trophenols Reduction

The design and development of proton conduction materials for clean energy-related applications is obviously important and highly desired but challenging. An ultrastable cobalt-based metal-organic framework Co-MOF, formulated as [Co2(btzip)2(μ2-OH2)] (namely, LCUH-103, H2btzip = 4, 6-bis(triazol-1-yl)-isophthalic acid) had been successfully synthesized via the hydrothermal method. LCUH-103 exhibits a three-dimensional framework and a one-dimensional microporous channel structure with scu topology based on the binuclear metallic cluster {Co2}. LCUH-103 indicated excellent chemical and thermal stability; peculiarly, it can retain its entire framework in acid and alkali solutions with different pH values for 24 h. The excellent stability is a prerequisite for studying its proton conductivity, and its proton conductivity σ can reach up to 1.25 × 10-3 S·cm-1 at 80 °C and 100% relative humidity (RH). In order to enhance its proton conductivity, the proton-conducting material Im@LCUH-103 had been prepared by encapsulating imidazole molecules into the channels of LCUH-103. Im@LCUH-103 indicated an excellent proton conductivity of 3.18 × 10-2 S·cm-1 at 80 °C and 100% RH, which is 1 order of magnitude higher than that of original LCUH-103. The proton conduction mechanism was systematically studied by various detection means and theoretical calculations. Meanwhile, LCUH-103 is also an excellent carrier for palladium nanoparticles (Pd NPs) via a wetness impregnation strategy, and the nitrophenols (4/3/2-NP) reduction in aqueous solution by Pd@LCUH-103 indicated an outstanding conversion efficiency, high rate constant (k), and exceptional cycling stability. Specifically, the k value of 4-NP reduction by Pd@LCUH-103 is superior to many other reported catalysts, and its k value is as high as 1.34 min-1 and the cycling stability can reach up to 6 cycles. Notably, its turnover frequency (TOF) value is nearly 196.88 times more than that of Pd/C (wt 5%) in the reaction, indicating its excellent stability and catalytic activity.

Self-supporting, hierarchically hollow structured NiFe-PBA electrocatalyst for efficient alkaline seawater oxidation

Seawater electrolysis, taking advantage of the huge seawater resource, holds great promise for sustainable hydrogen generation. Compared to conventional water electrolysis, seawater electrolysis is more challenging because of the more complex and corrosive electrolyte and competitive side reactions, which necessitates the development of highly efficient and stable electrocatalysts. In this study, a self-supporting, highly porous NiFe-PBA (Prussian-blue-analogue) electrocatalyst with a hierarchically hollow nanostructure is introduced, which exhibits impressive catalytic performance towards the oxygen evolution in alkaline seawater electrolytes. In NiFe-PBA, the synergistic interaction between Ni and Fe improves intrinsic conductivity for efficient electron transfer, enhances chemical stability in seawater, and boosts overall electrocatalytic activity. The direct use of self-supporting NiFe-PBA as an electrocatalyst avoids the energy-intensive and tedious pyrolysis procedure during the preparation process while making use of the tailored morphological, structural, and compositional benefits of PBA-based materials. By combining the NiFe-PBA catalyst with the NiMoN cathode, the constructed two-electrode electrolyzer achieved a high current density of 500 mA cm-2 at a low cell voltage of 1.782 V for overall electrolysis of alkaline seawater, demonstrating excellent durability for 100 hours. Our findings have important implications for the hydrogen economy and sustainable development through the development of robust and efficient PBA-based electrocatalysts for seawater electrolysis.

Trimetallic Oxide Electrocatalyst for Enhanced Redox Activity in Zinc-Air Batteries Evaluated by In Situ Analysis

Researchers are investigating innovative composite materials for renewable energy and energy storage systems. The major goals of this studies are i) to develop a low-cost and stable trimetallic oxide catalyst and ii) to change the electrical environment of the active sites through site-selective Mo substitution. The effect of Mo on NiCoMoO4 is elucidated using both in situ X-ray absorption spectroscopy and X-ray diffraction analysis. Also, density functional theory strategies show that NiCoMoO4 has extraordinary catalytic redox activity because of the high adsorption energy of the Mo atom on the active crystal plane. Further, it is demonstrated that hierarchical nanoflower structures of NiCoMoO4 on reduced graphene oxide can be employed as a powerful bifunctional electrocatalyst for oxygen reduction/evolution reactions in alkaline solutions, providing a small overpotential difference of 0.75 V. Also, Zn-air batteries based on the developed bifunctional electrocatalyst exhibit outstanding cycling stability and a high-power density of 125.1 mW cm-2 . This work encourages the use of Zn-air batteries in practical applications and provides an interesting concept for designing a bifunctional electrocatalyst.

Phosphorization Engineering on a MOF-Derived Metal Phosphide Heterostructure (Cu/Cu3P@NC) as an Electrode for Enhanced Supercapacitor Performance

A highly conductive and rationally constructed metal-organic framework (MOF)-derived metal phosphide with a carbonaceous nanostructure is a meticulous architecture toward the development of electrode materials for energy storage devices. Herein, we report a facile strategy to design and construct a new three-dimensional (3D) Cu-MOF via a solvent diffusion method at ambient temperature, which was authenticated by a single-crystal X-ray diffraction study, revealing a novel topology of (2,4,7)-connected three-nodal net named smm4. Nevertheless, the poor conductivity of pristine MOFs is a major bottleneck hindering their capacitance. To overcome this, we demonstrated an MOF-derived Cu3P/Cu@NC heterostructure via low-temperature phosphorization of Cu-MOF. The electronic and ionic diffusion kinetics in Cu3P/Cu@NC were improved due to the synergistic effects of the heterostructure. The as-prepared Cu3P/Cu@NC heterostructure electrode delivers a specific capacity of 540 C g-1 at 1 A g-1 with outstanding rate performance (190 C g-1 at 20 A g-1) and cycle stability (91% capacity retention after 10,000 cycles). Moreover, the assembled asymmetric solid-state supercapacitor (ASC) achieved a high energy density/power density of 45.5 Wh kg-1/7.98 kW kg-1 with a wide operating voltage (1.6 V). Long-term stable capacity retention (87.2%) was accomplished after 5000 cycles. These robust electrochemical performances suggest that the Cu3P/Cu@NC heterostructure is a suitable electrode material for supercapacitor applications.

Symmetry or asymmetry: which one is the platform of nitrogen vacancies for alkaline hydrogen evolution

Conventional nitrogen vacancies with a symmetric coordination of metal cations (i.e., M1-Nv-M1) play a crucial role in tuning the local environment of the metal sites in metal nitrides and improving their electrochemical activity in the hydrogen evolution reaction (HER). However, the symmetric Nv sites, which feature a uniform charge distribution on adjacent metal sites, suffer from sluggish water dissociation kinetics and a poor capability for hydrogen desorption. Here, we fabricated Cr-doped and Nv-rich Co4N nanorods grown on a Ni foam (Cr-Co4N-Nv/NF) with asymmetric Cr-Nv-Co sites to effectively catalyze hydrogen evolution under alkaline conditions, with a low overpotential of 33 mV at a current density of 10 mA cm-2 and a small Tafel slope of 37 mV dec-1. The experimental characterizations and theoretical simulations collectively reveal that the construction of asymmetric Cr-Nv-Co sites gives rise to the upshift of the d-band center, thus promoting water adsorption and activation. Moreover, asymmetric Nv sites allow a balance between hydrogen adsorption and desorption, which avoids the limited desorption process over the symmetric Co-Nv-Co sites.

A Self-Templated Design Approach toward Multivariate Metal-Organic Frameworks for Enhanced Oxygen Evolution

Multivariate metal-organic framework (MOF) is an ideal electrocatalytic material due to the synergistic effect of multiple metal active sites. In this study, a series of ternary M-NiMOF (M = Co, Cu) through a simple self-templated strategy that the Co/Cu MOF isomorphically grows in situ on the surface of NiMOF is designed. Owing to the electron rearrange of adjacent metals, the ternary CoCu-NiMOFs demonstrate the improved intrinsic electrocatalytic activity. At optimized conditions, the ternary Co3 Cu-Ni2 MOFs nanosheets give the excellent oxygen evolution reaction (OER) performance of current density of 10 mA cm-2 at low overpotential of 288 mV with a Tafel slope of 87 mV dec-1 , which is superior to that of bimetallic nanosheet and ternary microflowers. The low free energy change of potential-determining step identifies that the OER process is favorable at Cu-Co concerted sites along with strong synergistic effect of Ni nodes. Partially oxidized metal sites also reduce the electron density, thus accelerating the OER catalytic rate. The self-templated strategy provides a universal tool to design multivariate MOF electrocatalysts for highly efficient energy transduction.

Multimetallic Single-Atom Catalysts for Bifunctional Oxygen Electrocatalysis

Multimetallic alloys have demonstrated promising performance for the application of metal-air batteries, while it remains a challenge to design multimetallic single-atom catalysts (MM-SACs). Herein, metal-C3N4 and nitrogen-doped carbon are employed as cornerstones to synthesize MM-SACs by a general two-step method, and the inherent features of atomic dispersion and the strong electronic reciprocity between the multimetallic sites have been verified. The trimetallic FeCoZn-SACs and quatermetallic FeCoCuZn-SACs are both found to deliver superior oxygen evolution reaction and oxygen reduction reaction activity, respectively, as well as outstanding bifunctional durability. Density functional theory calculations elucidate the crucial contribution of Co sites of FeCoCuZn-SACs to the efficient catalysis of both the ORR and the OER. More importantly, Zn-air batteries with FeCoCuZn-SACs as cathodic catalysts exhibit a high power density (252 mW cm-2), high specific capacity (817 mAh gZn-1), and considerable stability (over 225 h) for charging-discharging processes. This work provides a visual perspective for the advantages of MM-SACs toward oxygen electrocatalysis.

Mixed solvent-assisted synthesis of high mass loading amorphous NiCo-MOF as a promising electrode material for supercapacitors

The pursuit of high mass loading metal-organic framework (MOF) materials via a simple method is crucial to achieve high-performance supercapacitors. Herein, an amorphous NiCo-MOF material with a high mass loading of up to 10.3 mg cm-2 was successfully prepared using a mixed solvent system of ethanol and water. In addition, by adjusting the volume ratio of ethanol to water, amorphous NiCo-MOFs with three different morphologies including nanospheres, nanopores, and ultra-thick plates were obtained. It was found that the different solvent systems not only affected the growth rate of MOFs, but also controlled their nucleation rate by changing the coordination environment of the metal ions, and thus achieved morphology and mass loading regulation, thereby influencing their energy storage behavior. Notably, the optimum NiCo-MOF exhibited the superior specific capacitance of up to 9.7 F cm-2 (941.8 F g-1) at a current density of 5 mA cm-2 and high-rate capability of 71.1% even at 20 mA cm-2. Moreover, the corresponding assembled solid-state supercapacitor exhibited an excellent energy density of 0.65 mW h cm-2 at a power density of 2 mW cm-2 and capacity retention of 84.7% after 8000 cycles at 30 mA cm-2. Overall, this work proposes a feasible and effective strategy to achieve high mass loading NiCo-MOFs, impacting their ultimate electrochemical performance, which can possibly be further extended to other MOFs with superior capacitance.