Azo-Crosslinked Double-Network Hydrogels Enabling Highly Efficient Mechanoradical Generation

Mechanically robust, flexible, conductive, and anti-freezing hydrogels reinforced by cellulose of wood skeleton

Hydrogels are soft and wet materials, but their applications are always limited by insufficient mechanical strength and toughness, and they are prone to freezing at low temperatures. In this study, we introduced an eco-friendly approach to developing wood-based hydrogels reinforced by the naturally aligned wood skeleton (WS) through the Hofmeister effect. The resulting wood-based composite hydrogels exhibited a high tensile strength of 20 MPa and a strain of 35 % in the longitudinal direction. This impressive mechanical performance was primarily due to densely packed hydrogen bonding, physical entanglements, and van der Waals forces between the cellulose of WS, polyacrylamide (PAM), and poly(vinyl alcohol) (PVA) chains during polymerization. Notably, the polymerization was induced using wood carbon dots as initiators, imparting additional fluorescence features to the hydrogels. Afterward, by incorporating a metal salt (sodium chloride), the developed wood-based hydrogels maintained high conductivity (3.0 S/m) and mechanical properties even under low-temperature conditions (-20 °C). Moreover, the conductive hydrogels exhibited multifunctional sensing capabilities, including strain, temperature, and ultraviolet (UV) irradiation detection, making them highly suitable for applications in human motion monitoring and healthcare, particularly under harsh environmental conditions.

Initiatorless polymerization of mechanically robust hydrogels reinforced by cellulose of wood skeleton as multifunctional sensors

Wood-based hydrogel with a unique anisotropic structure is an attractive soft-and-wet material. However, it remains a challenge to simultaneously achieve robust, multi-functional, and multi-response integrations through a sustainable and green approach. Herein, a bioinspired, additive-free method is reported to fabricate composite hydrogels reinforced by naturally high-strength wood skeleton without using any chemical initiators and crosslinking agents. Specifically, polymers (Polyacrylamide/Polyacrylic acid) are grafted from the surfaces of the aligned cellulose of wood skeleton, forming wood-based hydrogels under UV irradiation. Afterward, Fe3+-mediated physical crosslinking is employed further to construct chemically crosslinked poly(acrylamide-co-acrylic acid) networks. Therefore, the resulting initiatorless wood-based hydrogel with a dual-crosslinked network structure exhibits an ultra-high tensile strength of 42 MPa along the longitudinal direction, representing one of the strongest hydrogels ever reported. Furthermore, the wood-based hydrogels with inherent conductive properties appealing versatile sensations on strain, temperature, and light, which could serve as human-motion monitors (detection), thermo-electrochemical sensors, underwater wearable sensors, and smart-home systems. This work offers a green and promising strategy to fabricate robust, anisotropic, flexible, and ionically conductive wood-based hydrogels for multifunctional sensors with excellent performance in complex environments.

Ring-Toughened Polymer Networks: The Mighty Impact of Specially Designed Rings on Mechanical Properties

Polymer network materials are gaining significance in daily life and industrial applications. Improving polymer network materials' mechanical properties has long been a focus for chemists and materials scientists. Generally, rings in networks are viewed as adverse elements leading to reduced mechanical performance. In this conceptual article, recent advancements and related strategies in utilizing specially designed rings to enhance the mechanical properties of polymer networks are summarized and discussed. The article concludes by discussing current challenges and future prospects in this field. We aim for this article to offer readers an overview of ring-toughened polymer networks and to catalyze swift progress in this burgeoning area.

Development of Bioorthogonally Degradable Tough Hydrogels Using Enamine N-Oxide Based Crosslinkers

Inducibly degradable polymers present new opportunities to integrate tough hydrogels into a wide range of biomaterials. Rapid and inducible degradation enables fast transition in material properties without sacrificing material integrity prior to removal. In pursuit of bioorthogonal chemical modalities that will enable inducible polymer degradation in biologically relevant environments, enamine N-oxide crosslinkers are developed for double network acrylamide-based polymer/alginate hydrogels. Bioorthogonal dissociation initiated by the application of aqueous diboron solution through several delivery mechanisms effectively lead to polymer degradation. Their degradation by aqueous B2(OH)4 solution results in a fracture energy half-life of <10 min. The biocompatibility of the degradable hydrogels and B2(OH)4 reagent is assessed, and the removability of strongly adhered tough hydrogels on mice skin is evaluated. Thermoresponsive PNiPAAm/Alg hydrogels are fabricated and application of the hydrogels as a chemically inducible degradable intraoral wound dressing is demonstrated. It is demonstrated through in vivo maximum tolerated dose studies that diboron solution administered to mice by oral gavage is well tolerated. Successful integration of enamine N-oxides within the tough double network hydrogels as chemically degradable motifs demonstrates the applicability of enamine N-oxides in the realm of polymer chemistry and highlights the importance of chemically induced bioorthogonal dissociation reactions for materials science.

Rapid self-strengthening in double-network hydrogels triggered by bond scission

The scission of chemical bonds in materials can lead to catastrophic failure, with weak bonds typically undermining the materials' strength. Here we demonstrate how weak bonds can be leveraged to achieve self-strengthening in polymer network materials. These weak sacrificial bonds trigger mechanochemical reactions, forming new networks rapidly enough to reinforce the material during deformation and significantly improve crack resistance. This rapid strengthening exhibits strong rate dependence, dictated by the interplay between bond breaking and the kinetics of force-induced network formation. As the network formation is generally applicable to diverse monomers and crosslinkers with different kinetics, a wide range of mechanical properties can be obtained. These findings may inspire the design of tough polymer materials with on-demand, rate-dependent mechanical behaviours through mechanochemistry, broadening their applications across various fields.

Network design for soft materials: addressing elasticity and fracture resistance challenges

Soft materials, such as elastomers and gels, feature crosslinked polymer chains that provide stretchable and elastic mechanical properties. These properties are derived from entropic elasticity, which limits energy dissipation and makes the material susceptible to fracture. To address this issue, network designs that dissipate energy through the plastic zone have been introduced to enhance toughness; however, this approach compromises elasticity, preventing the material from fully recovering its original shape after deformation. In this review, we describe the trade-off between fracture resistance and elasticity, exploring network designs that overcome this limitation to achieve both high toughness and low hysteresis. The development of soft materials that are both elastic and fracture-resistant holds significant promise for applications in stretchable electronics, soft robotics, and biomedical devices. By analyzing successful network designs, we identify strategies to further improve these materials and discuss potential enhancements based on existing limitations.

Weak Covalent Bonds and Mechanochemistry for Synergistic Self-Strengthening of Elastomers

The macroscopic properties of elastomers are intimately linked to their molecular reactivity and mechanisms. Here, we propose a new strategy for designing strengthening materials based on the synergy of weak covalent bonds and mechanochemistry. After mechanical treatment, the failure strength and toughness of the elastomer increased from 2.37 ± 0.05 MPa and 11.34 ± 0.30 MJ/m3 to 6.02 ± 0.04 MPa and 18.40 ± 0.30 MJ/m3, respectively, while maintaining excellent tensile properties. Notably, experimental tests, theoretical calculations, and small-molecule reaction model results show that the sulfur-carbon bond is more prone to homolysis, and the reactive sites are between sulfur radicals and the end-positioned carbon of the vinyl. The C-S weak bond of spirothiopyran (STP) first undergoes homolysis to dissipate energy suffering from external stress, and the radical-mediated click reaction leads to the interchain cross-linking, thus enhancing the mechanical strength. In the end, the prepared elastomer is further used to construct a photonic elastomer, which exhibits not only mechanical force-enhanced strength but also mechanochromism. The present work provides an opportunity for innovative design of self-strengthening materials, and the prepared novel self-strengthening elastomer has broad applications in visualized strain monitoring, electronic skin, soft robots, and other fields.

Polymerizable deep eutectic solvent-gels synthesized in situ under molecular engineering control exhibit excellent adhesion, freeze resistance, as well as stretching and humidity sensing capabilities

Hydrogels generally do not adhere well to different substrates and freeze at sub-zero temperatures, limiting their application. In this study, the strategy of replacing water in hydrogels with deep eutectic solvents (DES) was used to address these challenges. Specifically, choline chloride (ChCl) as hydrogen bond acceptor, acrylic acid (AA) and itaconic acid (IA) as hydrogen bond donors and polymerizable monomers constitute PDES. Afterwards, PDES-gel (PG) was obtained by adding a thermal initiator to polymerize AA and IA in PDES. PG has the following characteristics, because PG is almost water-free, it has remarkable low-temperature tolerance without any phase change at -60 °C to 20 °C. Thanks to the carboxyl groups and chloride ions contained in PG, it can form non-covalent interactions such as hydrogen bonding and ionic interactions with different substrates, so PG can adhere to various substrate surfaces. Furthermore, the breaking elongation of the novelty PG was up to ca. 960 %, tensile strength ca. 1 MPa, outstanding transparency with an average light transmittance of about 95 % in the visible-light range. Ultimately, the novel PG exhibited certain capabilities for moisture detection and deformation sensing. The new PDES-gel material developed using PDES is expected to provide new ideas for the advancement of wearable devices.

Fracture-Resistant Stretchable Materials: An Overview from Methodology to Applications

Stretchable materials, such as gels and elastomers, are attractive materials in diverse applications. Their versatile fabrication platforms enable the creation of materials with various physiochemical properties and geometries. However, the mechanical performance of traditional stretchable materials is often hindered by the deficiencies in their energy dissipation system, leading to lower fracture resistance and impeding their broader range of applications. Therefore, the synthesis of fracture-resistant stretchable materials has attracted great interest. This review comprehensively summarizes key design considerations for constructing fracture-resistant stretchable materials, examines their synthesis strategies to achieve elevated fracture energy, and highlights recent advancements in their potential applications.

Mechanical Regulation of Polymer Gels

The mechanical properties of polymer gels devote to emerging devices and machines in fields such as biomedical engineering, flexible bioelectronics, biomimetic actuators, and energy harvesters. Coupling network architectures and interactions has been explored to regulate supportive mechanical characteristics of polymer gels; however, systematic reviews correlating mechanics to interaction forces at the molecular and structural levels remain absent in the field. This review highlights the molecular engineering and structural engineering of polymer gel mechanics and a comprehensive mechanistic understanding of mechanical regulation. Molecular engineering alters molecular architecture and manipulates functional groups/moieties at the molecular level, introducing various interactions and permanent or reversible dynamic bonds as the dissipative energy. Molecular engineering usually uses monomers, cross-linkers, chains, and other additives. Structural engineering utilizes casting methods, solvent phase regulation, mechanochemistry, macromolecule chemical reactions, and biomanufacturing technology to construct and tailor the topological network structures, or heterogeneous modulus compositions. We envision that the perfect combination of molecular and structural engineering may provide a fresh view to extend exciting new perspectives of this burgeoning field. This review also summarizes recent representative applications of polymer gels with excellent mechanical properties. Conclusions and perspectives are also provided from five aspects of concise summary, mechanical mechanism, biofabrication methods, upgraded applications, and synergistic methodology.

Productive chemistry induced by mechanochemically generated macroradicals

Large or repeated mechanical loads degrade polymeric materials by accelerating chain fragmentation. This mechanochemical backbone fracture usually occurs by homolysis of otherwise inert C-C, C-O and C-S bonds, generating highly reactive macroradicals. Because backbone fracture is detrimental on its own and the resulting macroradicals can initiate damaging reaction cascades, a major thrust in contemporary polymer mechanochemistry is to suppress it, usually by mechanochemical release of "hidden length" that dissipates local molecular strain. Here we summarize an emerging complementary strategy of channelling mechanochemically generated macroradicals in reaction cascades to form new load-bearing chemical bonds, which enables local self-healing or self-strengthening, and/or to generate mechanofluorescence, which could yield detailed quantitative molecular understanding of how material-failure-inducing macroscopic mechanical loads distribute across the network. We aim to identify generalizable lessons derivable from the reported implementations of this strategy and outline the key challenges in adapting it to diverse polymeric materials and loading scenarios.

Understanding the Mechanochemistry of Mechano-Radicals in Self-Growth Materials by Single-Molecule Force Spectroscopy

Recent research on mechano-radicals has provided valuable insights into self-growth and adaptive responsive materials. Typically, mechanophores must remain inert in the absence of force but respond quickly to external tension before other linkages within the polymer network. Azo compounds exhibit promising combinations of mechanical stability and force-triggered reactivity, making them widely used as mechano-radicals in force-responsive materials. However, the activation conditions and behavior of azo compounds have yet to be quantitatively explored. In this study, we investigated the mechanical strength of three azo compounds using single-molecule force spectroscopy. Our results revealed that these compounds exhibit rupture forces ranging from ~500 to 1000 pN, at a loading rate of 3×104 pN s-1. Importantly, these mechanophores demonstrate distinct kinetic properties. Their unique mechanical attributes enable azo bond scission and free radical generation before causing major polymer backbone damage of entire material during polymer network deformation. This fundamental understanding of mechanophores holds significant promise for the development of self-growth materials and their related applications.

Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability

Digital light processing (DLP) is a 3D printing technology offering high resolution and speed. Printable materials are commonly based on multifunctional monomers, resulting in the formation of thermosets that usually cannot be reprocessed or recycled. Some efforts are made in DLP 3D printing of thermoplastic materials. However, these materials exhibit limited and poor mechanical properties. Here, a new strategy is presented for DLP 3D printing of thermoplastics based on a sequential construction of two linear polymers with contrasting (stiff and flexible) mechanical properties. The inks consist of two vinyl monomers, which lead to the stiff linear polymer, and α-lipoic acid, which forms the flexible linear polymer via thermal ring-opening polymerization in a second step. By varying the ratio of stiff and flexible linear polymers, the mechanical properties can be tuned with Young's modulus ranging from 1.1 GPa to 0.7 MPa, while the strain at break increased from 4% to 574%. Furthermore, these printed thermoplastics allow for a variety of reprocessability pathways including self-healing, solvent casting, reprinting, and closed-loop recycling of the flexible polymer, contributing to the development of a sustainable materials economy. Last, the potential of the new material in applications ranging from soft robotics to electronics is demonstrated.

Mechanochemical Fabrication of Full-Color Luminescent Materials from Aggregation-Induced Emission Prefluorophores for Information Storage and Encryption

The development of luminescent materials via mechanochemistry embodies a compelling yet intricate frontier within materials science. Herein, we delineate a methodology for the synthesis of brightly luminescent polymers, achieved by the mechanochemical coupling of aggregation-induced emission (AIE) prefluorophores with generic polymers. An array of AIE moieties tethered to the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical are synthesized as prefluorophores, which initially exhibit weak fluorescence due to intramolecular quenching. Remarkably, the mechanical coupling of these prefluorophores with macromolecular radicals, engendered through ball milling of generic polymers, leads to substantial augmentation of fluorescence within the resultant polymers. We meticulously evaluate the tunable emission of the AIE-modified polymers, encompassing an extensive spectrum from the visible to the near-infrared region. This study elucidates the potential of such materials in stimuli-responsive systems with a focus on information storage and encryption displays. By circumventing the complexity inherent to the conventional synthesis of luminescent polymers, this approach contributes a paradigm to the field of AIE-based polymers with implications for advanced technological applications.

Hydrogel morphogenesis induced by force-controlled growth

Morphogenesis is one of the most marvelous natural phenomena. The morphological characteristics of biological organs develop through growth, which is often triggered by mechanical force. In this study, we propose a bioinspired strategy for hydrogel morphogenesis through force-controlled chemical reaction and growth under isothermal conditions. We adopted a double network (DN) hydrogel with sacrificial bonds. Applying mechanical force to the gel caused deformation and sacrificial bond rupture. By supplying monomers to the gel, the radicals generated by the bond rupture triggered the formation of a new network inside the deformed gel. This new network conferred plasticity to the elastic gel, allowing it to maintain its deformed shape, along with increased volume and strength. We demonstrated that sheet-shaped DN hydrogels rapidly adopted various three-dimensional shapes at ambient temperature when subjected to forces such as drawing and blowing. This mechanism enables morphogenesis of elastic hydrogels and will promote the application of these materials in biomedical fields and soft machines.

Effect of the Activation Force of Mechanophore on Its Activation Selectivity and Efficiency in Polymer Networks

In recent decades, more than 100 different mechanophores with a broad range of activation forces have been developed. For various applications of mechanophores in polymer materials, it is crucial to selectively activate the mechanophores with high efficiency, avoiding nonspecific bond scission of the material. In this study, we embedded cyclobutane-based mechanophore cross-linkers (I and II) with varied activation forces (fa) in the first network of the double network hydrogels and quantitively investigated the activation selectivity and efficiency of these mechanophores. Our findings revealed that cross-linker I, with a lower activation force relative to the bonds in the polymer main chain (fa-I/fa-chain = 0.8 nN/3.4 nN), achieved efficient activation with 100% selectivity. Conversely, an increase of the activation force of mechanophore II (fa-II/fa-chain = 2.5 nN/3.4 nN) led to a significant decrease of its activation efficiency, accompanied by a substantial number of nonspecific bond scission events. Furthermore, with the coexistence of two cross-linkers, significantly different activation forces resulted in the almost complete suppression of the higher-force one (i.e., I and III, fa-I/fa-III = 0.8 nN/3.4 nN), while similar activation forces led to simultaneous activations with moderate efficiencies (i.e., I and IV, fa-I/fa-IV = 0.8 nN/1.6 nN). These findings provide insights into the prevention of nonspecific bond rupture during mechanophore activation and enhance our understanding of the damage mechanism within polymer networks when using mechanophores as detectors. Besides, it establishes a principle for combining different mechanophores to design multiple mechanoresponsive functional materials.

Azobenzene as a photoswitchable mechanophore

Azobenzene has been widely explored as a photoresponsive element in materials science. Although some studies have investigated the force-induced isomerization of azobenzene, the effect of force on the rupture of azobenzene has not been explored. Here we show that the light-induced structural change of azobenzene can also alter its rupture forces, making it an ideal light-responsive mechanophore. Using single-molecule force spectroscopy and ultrasonication, we found that cis and trans para-azobenzene isomers possess contrasting mechanical properties. Dynamic force spectroscopy experiments and quantum-chemical calculations in which azobenzene regioisomers were pulled from different directions revealed that the distinct rupture forces of the two isomers are due to the pulling direction rather than the energetic difference between the two isomers. These mechanical features of azobenzene can be used to rationally control the macroscopic fracture behaviours of polymer networks by photoillumination. The use of light-induced conformational changes to alter the mechanical response of mechanophores provides an attractive way to engineer polymer networks of light-regulatable mechanical properties.

Shape morphing of hydrogels by harnessing enzyme enabled mechanoresponse

Hydrogels have been designed to react to many different stimuli which find broad applications in tissue engineering and soft robotics. However, polymer networks bearing mechano-responsiveness, especially those displaying on-demand self-stiffening and self-softening behavior, are rarely reported. Here, we design a mechano-controlled biocatalytic system at the molecular level that is incorporated into hydrogels to regulate their mechanical properties at the material scale. The biocatalytic system consists of the protease thrombin and its inhibitor, hirudin, which are genetically engineered and covalently coupled to the hydrogel networks. The catalytic activity of thrombin is reversibly switched on by stretching of the hydrogels, which disrupts the noncovalent inhibitory interaction between both entities. Under cyclic tensile-loading, hydrogels exhibit self-stiffening or self-softening properties when substrates are present that can self-assemble to form new networks after being activated by thrombin or when cleavable peptide crosslinkers are constitutional components of the original network, respectively. Additionally, we demonstrate the programming of bilayer hydrogels to exhibit tailored shape-morphing behavior under mechanical stimulation. Our developed system provides proof of concept for mechanically controlled reversible biocatalytic processes, showcasing their potential for regulating hydrogels and proposing a biomacromolecular strategy for mechano-regulated soft functional materials.

Polymer mechanochemistry: from single molecule to bulk material

The field of polymer mechanochemistry has experienced a renaissance over the past decades, primarily propelled by the rapid development of force-sensitive molecular units (i.e., mechanophores) and principles governing the reactivity of polymer networks for mechanochemical transduction or material strengthening. In addition to fundamental guidelines for converting mechanical energy input into chemical output, there has also been increasing focus on engineering applications of polymer mechanochemistry for specific functions, mechanically adaptive material systems, and smart devices. These endeavors are made possible by multidisciplinary approaches involving the development of multifunctional mechanophores for mechanoresponsive polymer systems, mechanochemical catalysis and synthesis, three-dimensional (3D) printed mechanochromic materials, reasonable design of polymer network topology, and computational modeling. The aim of this minireview is to provide a summary of recent advancements in covalent polymer mechanochemistry. We specifically focus on productive mechanophores, mechanical remodeling of polymeric materials, and the development of theoretical concepts.

Role of hierarchy structure on the mechanical adaptation of self-healing hydrogels under cyclic stretching

Soft materials with mechanical adaptability have substantial potential for various applications in tissue engineering. Gaining a deep understanding of the structural evolution and adaptation dynamics of soft materials subjected to cyclic stretching gives insight into developing mechanically adaptive materials. Here, we investigate the effect of hierarchy structure on the mechanical adaptation of self-healing hydrogels under cyclic stretching training. A polyampholyte hydrogel, composed of hierarchical structures including ionic bonds, transient and permanent polymer networks, and bicontinuous hard/soft-phase networks, is adopted as a model. Conditions for effective training, mild overtraining, and fatal overtraining are demonstrated in soft materials. We further reveal that mesoscale hard/soft-phase networks dominate the long-term memory effect of training and play a crucial role in the asymmetric dynamics of compliance changes and the symmetric dynamics of hydrogel shape evolution. Our findings provide insights into the design of hierarchical structures for adaptive soft materials.

Shake, shear, and grind! - the evolution of mechanoredox polymerization methodology

In the last half decade, mechanoredox catalysis has enabled an entirely new genre of polymerization methodology. In this paradigm, mechanical force, such as ultrasonic cavitation bubble collapse or ball mill grinding, polarizes piezoelectric nanoparticles; the resultant piezopotential drives the redox processes necessary for free- and controlled-radical polymerizations. Since being introduced, evolution of these methods facilitates exploration of mechanistic underpinnings behind key electron-transfer events. Mechanical force has not only been identified as a "greener" alternative to more traditional reaction stimuli (e.g., heat, light) for the synthesis of commodity polymers, but also a potential technology to enable the production of novel thermoplastic and thermoset materials that are either challenging, or even impossible, to access using conventional solution-state approaches. In this Feature Article, significant contributions to such methods are highlighted within. Advances and ongoing challenges in both ultrasound and ball milling driven reactions for radical polymerization and crosslinking are identified and discussed.

Self-Growing Organic Materials

The growth of living systems is ubiquitous. Living organisms can continually update their sizes, shapes, and properties to meet various environmental challenges. Such a capability is also demonstrated by emerging self-growing materials that can incorporate externally provided compounds to grow as living organisms. In this Minireview, we summarize these materials in terms of six aspects. First, we discuss their essential characteristics, then describe the strategies for enabling crosslinked organic materials to self-grow from nutrient solutions containing polymerizable compounds. The developed examples are grouped into five categories based on their molecular mechanisms. We then explain the mechanism of mass transport within polymer networks during growth, which is critical for controlling the shape and morphology of the grown products. Afterwards, simulation models built to explain the interesting phenomena observed in self-growing materials are discussed. The development of self-growing materials is accompanied by various applications, including tuning bulk properties, creating textured surfaces, growth-induced self-healing, 4D printing, self-growing implants, actuation, self-growing structural coloration, and others. These examples are then summed up. Finally, we discuss the opportunities brought by self-growing materials and their facing challenges.

Sustainable mechanochemical growth of double-network hydrogels supported by vascular-like perfusion

Double-network (DN) gels are unique mechanochemical materials owing to their structures that can be dynamically remodelled during use. The mechanical energy applied to DN gels is efficiently transferred to the chemical bonds of the brittle network, generating mechanoradicals that initiate the polymerisation of pre-loaded monomers, thereby remodelling the materials. To attain continuous remodelling or growth in response to repetitive mechanical stimuli, a sustainable supply of chemical reagents to such dynamic materials is essential. In this study, inspired by the vascular perfusion transporting nutrients to cells, we constructed a circulatory system for a continuous supply of chemicals to channel-containing DN hydrogels (c-DN gels). The perfusion of monomer solutions through the channel and permeability of the c-DN gels not only replenishes the monomers consumed by the polymerisation but also replenishes the water loss caused by the surface evaporation of hydrogel, thereby freeing the mechanochemical process of DN gels from the constraints of the underwater environment. The facile chemical supply enabled us to modulate the mechanical enhancement of the c-DN gel and attain muscle-like strengthening under repeated mechanical training in deoxygenated air. We also studied the kinetics of polymer growth and strengthening and deciphered unique features of mechanochemical reaction in DN gels including the extremely long-living radicals and delayed mechanical strengthening.

Preferential Mechanochemical Activation of Short Chains in Bidisperse Triblock Elastomers

Polymer mechanochemistry offers attractive opportunities for using macroscopic forces to drive molecular-scale chemical transformations, but achieving efficient activation in bulk polymeric materials has remained challenging. Understanding how the structure and topology of polymer networks impact molecular-scale force distributions is critical for addressing this problem. Here we show that in block copolymer elastomers the molecular-scale force distributions and mechanochemical activation yields are strongly impacted by the molecular weight distribution of the polymers. We prepare bidisperse triblock copolymer elastomers with spiropyran mechanophores placed in either the short chains, the long chains, or both and show that the overall mechanochemical activation of the materials is dominated by the short chains. Molecular dynamics simulations reveal that this preferential activation occurs because pinning of the ends of the elastically effective midblocks to the glassy/rubbery interface forces early extension of the short chains. These results suggest that microphase segregation and network strand dispersity play a critical role in determining molecular-scale force distributions and suggest that selective placement of mechanophores in microphase-segregated polymers is a promising design strategy for efficient mechanochemical activation in bulk materials.

Solvent-Exchange-Assisted Wet Annealing: A New Strategy for Superstrong, Tough, Stretchable, and Anti-Fatigue Hydrogels

Hydrogels are widely used in tissue engineering, soft robots, wearable electronics, etc. However, it remains a great challenge to develop hydrogels possessing simultaneously high strength, large stretchability, great fracture energy, and good fatigue threshold to suit different applications. Herein, a novel solvent-exchange-assisted wet-annealing strategy is proposed to prepare high performance poly(vinyl alcohol) hydrogels by extensively tuning the macromolecular chain movement and optimizing the polymer network. The reinforcing and toughening mechanisms are found to be "macromolecule crystallization and entanglement". These hydrogels have large tensile strengths up to 11.19 ± 0.27 MPa and extremely high fracture strains of 1879 ± 10%. In addition, the fracture energy and fatigue threshold can reach as high as 25.39 ± 6.64 kJ m^-2 and ≈1233 J m^-2 , respectively. These superb mechanical properties compare favorably to those of other tough hydrogels, organogels, and even natural tendons and synthetic rubbers. This work provides a new and effective method to fabricate superstrong, tough, stretchable, and anti-fatigue hydrogels with potential applications in artificial tendons and ligaments.

Metal-Coordinated Dynamics and Viscoelastic Properties of Double-Network Hydrogels

Biological soft tissues are intrinsically viscoelastic materials which play a significant role in affecting the activity of cells. As potential artificial alternatives, double-network (DN) gels, however, are pure elastic and mechanically time independent. The viscoelasticization of DN gels is an urgent challenge in enabling DN gels to be used for advanced development of biomaterial applications. Herein, we demonstrate a simple approach to regulate the viscoelasticity of tough double-network (DN) hydrogels by forming sulfonate-metal coordination. Owing to the dynamic nature of the coordination bonds, the resultant hydrogels possess highly viscoelastic, mechanical time-dependent, and self-recovery properties. Rheological measurements are performed to investigate the linear dynamic mechanical behavior at small strains. The tensile tests and cyclic tensile tests are also systematically performed to evaluate the rate-dependent large deformation mechanical behaviors and energy dissipation behaviors of various ion-loaded DN hydrogels. It has been revealed based on the systematic analysis that robust strong sulfonate-Zr⁴⁺ coordination interactions not only serve as dynamic crosslinks imparting viscoelastic rate-dependent mechanical performances, but also strongly affect the relative strength of the first PAMPS network, thereby increasing the yielding stress σ_y and the fracture stress at break σ_b and reducing the stretch ratio at break λ_b. It is envisioned that the viscoelasticization of DN gels enables versatile applications in the biomedical and engineering fields.

Strain-triggered acidification in a double-network hydrogel enabled by multi-functional transduction of molecular mechanochemistry

Recent work has demonstrated that force-triggered mechanochemical reactions within a polymeric material are capable of inducing measurable changes in macroscopic material properties, but examples of bulk property changes without irreversible changes in shape or structure are rare. Here, we report a double-network hydrogel that undergoes order-of-magnitude increases in acidity when strained, while recovering its initial shape after large deformation. The enabling mechanophore design is a 2-methoxy-gem-dichlorocyclopropane mechanoacid that is gated within a fused methyl methoxycyclobutene carboxylate mechanophore structure. This gated mechanoacid is incorporated via radical co-polymerization into linear and network polymers. Sonication experiments confirm the mechanical release of HCl, and single-molecule force spectroscopy reveals enhanced single-molecular toughness in the covalent strand. These mechanochemical functions are incorporated into a double-network hydrogel, leading to mechanically robust and thermally stable materials that undergo strain-triggered acid release. Both quasi-static stretching and high strain rate uniaxial compression result in substantial acidification of the hydrogel, from pH ∼ 7 to ∼5.

Covalent Mechanochemistry and Contemporary Polymer Network Chemistry: A Marriage in the Making

Over the past 20 years, the field of polymer mechanochemistry has amassed a toolbox of mechanophores that translate mechanical energy into a variety of functional responses ranging from color change to small-molecule release. These productive chemical changes typically occur at the length scale of a few covalent bonds (Å) but require large energy inputs and strains on the micro-to-macro scale in order to achieve even low levels of mechanophore activation. The minimal activation hinders the translation of the available chemical responses into materials and device applications. The mechanophore activation challenge inspires core questions at yet another length scale of chemical control, namely: What are the molecular-scale features of a polymeric material that determine the extent of mechanophore activation? Further, how do we marry advances in the chemistry of polymer networks with the chemistry of mechanophores to create stress-responsive materials that are well suited for an intended application? In this Perspective, we speculate as to the potential match between covalent polymer mechanochemistry and recent advances in polymer network chemistry, specifically, topologically controlled networks and the hierarchical material responses enabled by multi-network architectures and mechanically interlocked polymers. Both fundamental and applied opportunities unique to the union of these two fields are discussed.

Force-triggered rapid microstructure growth on hydrogel surface for on-demand functions

Living organisms share the ability to grow various microstructures on their surface to achieve functions. Here we present a force stamp method to grow microstructures on the surface of hydrogels based on a force-triggered polymerisation mechanism of double-network hydrogels. This method allows fast spatial modulation of the morphology and chemistry of the hydrogel surface within seconds for on-demand functions. We demonstrate the oriented growth of cells and directional transportation of water droplets on the engineered hydrogel surfaces. This force-triggered method to chemically engineer the hydrogel surfaces provides a new tool in addition to the conventional methods using light or heat, and will promote the wide application of hydrogels in various fields.

Mechanochemistry: New Tools to Navigate the Uncharted Territory of "Impossible" Reactions

Mechanochemical transformations have made chemists enter unknown territories, forcing a different chemistry perspective. While questioning or revisiting familiar concepts belonging to solution chemistry, mechanochemistry has broken new ground, especially in the panorama of organic synthesis. Not only does it foster new "thinking outside the box", but it also has opened new reaction paths, allowing to overcome the weaknesses of traditional chemistry exactly where the use of well-established solution-based methodologies rules out progress. In this Review, the reader is introduced to an intriguing research subject not yet fully explored and waiting for improved understanding. Indeed, the study is mainly focused on organic transformations that, although impossible in solution, become possible under mechanochemical processing conditions, simultaneously entailing innovation and expanding the chemical space.

Ultrasound-Induced Drug Release from Stimuli-Responsive Hydrogels

Stimuli-responsive hydrogel drug delivery systems are designed to release a payload when prompted by an external stimulus. These platforms have become prominent in the field of drug delivery due to their ability to provide spatial and temporal control for drug release. Among the different external triggers that have been used, ultrasound possesses several advantages: it is non-invasive, has deep tissue penetration, and can safely transmit acoustic energy to a localized area. This review summarizes the current state of understanding about ultrasound-responsive hydrogels used for drug delivery. The mechanisms of inducing payload release and activation using ultrasound are examined, along with the latest innovative formulations and hydrogel design strategies. We also report on the most recent applications leveraging ultrasound activation for both cancer treatment and tissue engineering. Finally, the future perspectives offered by ultrasound-sensitive hydrogels are discussed.