Ni-Centered Coordination-Induced Spin-State Switching Triggered by Electrical Stimulation

Low-/High-Spin Cobaltaboratranes Stabilized by Cis-/Trans-Isomeric Bisphosphines

Electronic spin isomerism in low-valent cobalt complexes can potentially be achieved through the rational design of ligand fields, but such instances have rarely been reported up to now. Herein, we crystallized two cobaltaboratrane complexes featuring CoI → B dative covalent bonds by leveraging the rigidity of the C═C bond from cis-/trans-isomeric bisphosphine ligands. The CoI cores in CoIB-cis/CoIB-trans are stabilized in six- and five-coordinate octahedral and trigonal bipyramidal geometries, respectively, resulting in low- and high-spin ground states, as demonstrated by magnetic measurements. Ab initio ligand field analysis revealed that both the ligand field and the CoI → B dative bond play crucial roles in the disparities in the energies of the d orbitals and their spin configurations.

π-Expansion as gateway to viologen-based pimers

The present article reports on a new and efficient synthetic strategy towards tetracene-bipyridiniums. On the basis of extensive experimental analyses supported by DFT simulations, we report the first observation of a mixed valence complex formed in solution under standard conditions from an unconstrained bis-viologene derivative.

Adsorption-Site- and Orientation-Dependent Magnetism of a Molecular Switch on Pb(100)

Tin phthalocyanine (SnPc) has been studied on superconducting Pb(100) using scanning tunneling microscopy and spectroscopy. Isolated molecules adsorb with their Sn ion below (SnPc↓) or above (SnPc↑) the molecular plane. These geometries lead to different adsorption sites, molecular orientations, and energies of the frontier orbitals. A transition from SnPc↑ to SnPc↓ can be induced by extracting electrons from a single molecule. Density functional theory (DFT) calculations reproduce the observed geometries and indicate that a positive charge of the molecules facilitates the ↑-↓ transition. The molecular orientations are essentially determined by the σ-orbitals on the peripheral N atoms and exhibit minimum distances of their lone pairs from the nearest Pb substrate atoms. This binding scheme, which implies a direct relationship between the adsorption site and the molecular orientation, is consistent with many previous observations on other substrates. In molecular islands, single molecules can be forced onto less favorable adsorption sites. This leads to a strong Yu-Shiba-Rusinov state of SnPc↓ at top sites revealing an induced molecular spin. Similarly, the spin observed from SnPc↑ on hollow sites is quenched by their conversion to SnPc↓. The calculated lowest unoccupied molecular orbital energies are consistent with these spin-state transitions.

Coordination Induced Spin State Transition Switches the Reactivity of Nickel (II) Porphyrin in Hydrogen Evolution Reaction

Electron spin plays a critical role in chemical processes, particularly in reactions involving metal complexes with unpaired electrons. However, more definitive state-to-state experiments are needed to better elucidate the role of electronic spin. Herein, we chose nickel (II) 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin 1 as a catalyst, which allows switching from a low spin to a high spin state of Ni (II) center through an axial pyridine coordination, for electrocatalytic hydrogen evolution reaction (HER). When pyridine is present, we observed β-hydrogenation of porphyrin through electron transfer followed by proton transfer. In contrast, hydrogen evolution mainly occurs via the concerted proton-coupling electron transfer without pyridine coordination. Similar distinct spin-dependent selectivity was also observed in chemical reduction of 1 by CoCp2 with subsequent addition of pyridinium p-toluenesulfonate. Computational calculations using density functional theory demonstrated that the transition from low spin to high spin state enriches the ligand's electron density after one-electron reduction, leading to preferential protonation of β-periphery rather than meso-position or metal center.

Mechanisms for the Spin-State Switching of Strapped Ni-Porphyrin Complexes Deposited on Metal Surfaces: Insights from Quantum Chemical Calculations

The incorporation of molecular switches on nanodevices requires both the intactness of the molecule once deposited on a substrate and the persistence of the reversible switching feature. Recently, the reversible spin-switching of strapped Ni(II)-porphyrin complexes deposited on Ag(111) surface is demonstrated with low-temperature scanning tunneling microscopy (STM). The spin transition is accompanied by the coordination change of the metal center, a phenomenon denominated in coordination-induced spin-state switching (CISSS). In this contribution, the spin switching of the deposited strapped Ni-porphyrin molecules using different quantum chemistry approaches is explored. This calculations inform about the geometry and electronic structure of the adsorbed molecules and the origin of the voltage-dependent switching promoted by the STM tip. Two different mechanisms are inspected to elucidate the key role of the tip, mainly the electron injection between the tip and the molecule and the differential stabilization of the two spin states by the applied electric field between the tip and the silver surface. This study puts in evidence the relevance of the pyridine ligand contained in the strap in the transport properties as in the CISSS process itself.

Spin-State Control in Dysprosium(III) Metallacrown Magnets via Thioacetal Modification

Integrating controllable spin states into single-molecule magnets (SMMs) enables precise manipulation of magnetic interactions at a molecular level, but remains a synthetic challenge. Herein, we developed a 3d-4f metallacrown (MC) magnet [DyNi5(quinha)5(Clsal)2(py)8](ClO4) ⋅ 4H2O (H2quinha=quinaldichydroxamic acid, HClsal=5-chlorosalicylaldehyde) wherein a square planar NiII is stabilized by chemical stacking. Thioacetal modification was employed via post-synthetic ligand substitutions and yielded [DyNi5(quinha)5(Clsaldt)2(py)8](ClO4) ⋅ 3H2O (HClsaldt=4-chloro-2-(1,3-dithiolan-2-yl)phenol). Thanks to the additional ligations of thioacetal onto the NiII site, coordination-induced spin state switching (CISSS) took place with spin state altering from low-spin S=0 to high-spin S=1. The synergy of CISSS effect and magnetic interactions results in distinct energy splitting and magnetic dynamics. Magnetic studies indicate prominent enhancement of reversal barrier from 57 cm-1 to 423 cm-1, along with hysteresis opening and an over 200-fold increment in coercive field at 2 K. Ab initio calculations provide deeper insights into the exchange models and rationalize the relaxation/tunnelling pathways. These results demonstrate here provide a fire-new perspective in modulating the magnetization relaxation via the incorporation of controllable spin states and magnetic interactions facilitated by the CISSS approach.

Reversible light-induced spin state switching in a dinuclear Fe(II) spin crossover complex

A dinuclear Fe(II) spin crossover (SCO) complex with the formula [Fe2L5(NCS)4]·2DMF·2H2O (1) was synthesised from 1-naphthylimino-1,2,4-triazole (L). Complex 1 exhibits an incomplete thermally induced spin transition with a transition temperature T1/2 of 95 K and a thermally trapped metastable high-spin state at low temperatures. Furthermore, it undergoes a reversible light-induced spin crossover by alternate irradiation with 532 and 808 nm lasers.

Switchable molecular tweezers: design and applications

Switchable molecular tweezers are a unique class of molecular switches that, like their macroscopic analogs, exhibit mechanical motion between an open and closed conformation in response to stimuli. Such systems constitute an essential component of artificial molecular machines. This review will present selected examples of switchable molecular tweezers and their potential applications. The first part will be devoted to chemically responsive tweezers, including stimuli such as pH, metal coordination, and anion binding. Then, redox-active and photochemical tweezers will be presented.

Internal Dynamics and Modular Peripheral Binding in Stimuli-Responsive 3 : 2 Host:Guest Complexes

Now that the chemistry of 1 : 1 host:guest complexes is well-established, it is surprising to note that higher stoichiometry (oligomeric) complexes, especially those with excess host, remain largely unexplored. Yet, proteins tend to oligomerize, affording new functions for cell machinery. Here, we show that cucurbit[n]uril (CB[n]) macrocycles combined with symmetric, linear di-viologens form unusual 3 : 2 host:guest complexes exhibiting remarkable dynamic properties, host self-sorting, and external ring-translocation. These results highlight the structural tunability of cucurbit[8]uril (CB[8]) based 3 : 2 host:guest complexes in water and their responsiveness toward several stimuli (chemicals, pH, redox).

Thermally Stable Photomechanical Molecular Hinge: Sterically Hindered Stiff-Stilbene Photoswitch Mechanically Isomerizes

Molecular photoswitches are extensively used as molecular machines because of the small structures, simple motions, and advantages of light including high spatiotemporal resolution. Applications of photoswitches depend on the mechanical responses, in other words, whether they can generate motions against mechanical forces as actuators or can be activated and controlled by mechanical forces as mechanophores. Sterically hindered stiff stilbene (HSS) is a promising photoswitch offering large hinge-like motions in the E/Z isomerization, high thermal stability of the Z isomer, which is relatively unstable compared to the E isomer, with a half-life of ca. 1000 years at room temperature, and near-quantitative two-way photoisomerization. However, its mechanical response is entirely unexplored. Here, we elucidate the mechanochemical reactivity of HSS by incorporating one Z or E isomer into the center of polymer chains, ultrasonicating the polymer solutions, and stretching the polymer films to apply elongational forces to the embedded HSS. The present study demonstrated that HSS mechanically isomerizes only in the Z to E direction and reversibly isomerizes in combination with UV light, i.e., works as a photomechanical hinge. The photomechanically inducible but thermally irreversible hinge-like motions render HSS unique and promise unconventional applications differently from existing photoswitches, mechanophores, and hinges.

Engineering Spin States of Isolated Copper Species in a Metal-Organic Framework Improves Urea Electrosynthesis

The catalytic activities are generally believed to be relevant to the electronic states of their active center, but understanding this relationship is usually difficult. Here, we design two types of catalysts for electrocatalytic urea via a coordination strategy in a metal-organic frameworks: CuIII-HHTP and CuII-HHTP. CuIII-HHTP exhibits an improved urea production rate of 7.78 mmol h-1 g-1 and an enhanced Faradaic efficiency of 23.09% at - 0.6 V vs. reversible hydrogen electrode, in sharp contrast to CuII-HHTP. Isolated CuIII species with S = 0 spin ground state are demonstrated as the active center in CuIII-HHTP, different from CuII with S = 1/2 in CuII-HHTP. We further demonstrate that isolated CuIII with an empty [Formula: see text] orbital in CuIII-HHTP experiences a single-electron migration path with a lower energy barrier in the C-N coupling process, while CuII with a single-spin state ([Formula: see text]) in CuII-HHTP undergoes a two-electron migration pathway.

Vapochromic effect in switchable molecular-based spin crossover compounds

Coordination complexes based on transition metal ions displaying [Ar]3d⁴-3d⁷ electronic configurations can undergo the likely most spectacular switchable phenomena found in molecular coordination chemistry, the well-known Spin Crossover (SCO). SCO phenomena is a detectable, reproducible and reversible switch that occurs between the high spin (HS) and low spin (LS) electronic states of the transition metal actuated by different stimuli (i.e. light, temperature, pressure, the presence of an analyte). Moreover, the occurrence of SCO phenomena causes different outputs, one of them being a colour change. Altogether, an analyte in gas form could be detected by naked eye once it has triggered the corresponding HS ↔ LS transition. This vapochromic effect could be used to detect volatile molecules using a low-cost technology, including harmful chemical substances, gases and/or volatile organic compounds (VOCs) that are present in our environment, in our home or at our workplace. The present review condenses all reported iron coordination compounds where the colour change induced by a given molecule in its gas form is coupled to a HS ↔ LS spin transition. Special emphasis has been made on describing the nature of the post-synthetic modification (PSM) taking place in the material upon the analyte uptake. In this case, three types of PSM can be distinguished: based on supramolecular contacts and/or leading to a coordinative or covalent bond. In the latter, a colour change not only indicates the switch of the spin state in the material but also the formation of a new compound with different properties. It is important to indicate that some of the SCO coordination compounds discussed in the current report have been part of other spin crossover reviews, that have gathered thermally induced SCO compounds and the influence of guest molecules on the SCO behaviour. However, in the majority of examples in these reviews, the change of colour upon the uptake of analytes is not associated with a spin transition at room temperature. In addition, the observed colour variations have been mainly discussed in terms of host-guest interactions, when they can also be induced by a PSM taking place in different sites of the molecule, like the Fe(II) coordination sphere or by chemically altering its inorganic and/or organic linkers. Therefore, we present here for the first time an exhaustive compilation of all systems in which the interaction between the coordination compounds and the vapour analytes leads to a colour change due to a spin transition in the metal centre at room temperature.