Single-Atom Iridium on Hematite Photoanodes for Solar Water Splitting: Catalyst or Spectator?

Surface Nd Sites Boost Charge Transfer of Fe2O3 Photoanodes for Enhanced Solar Water Oxidation

Photoelectrochemical (PEC) water splitting for hydrogen production is a promising technology for sustainable energy generation. In this work, we introduce Nd sites boost the PEC performance of Fe2O3 photoanodes through a precise gas-phase cation exchange process, which substitutes surface Fe atoms with Nd. The incorporation of Nd significantly enhances charge transfer properties, increases carrier concentration, and reduces internal resistance, leading to a substantial increase in photocurrent density from 0.44 to 0.92 mA cm-2 at 1.23 VRHE. Further enhancement of catalytic activity was achieved by depositing a NiCo(OH)x layer and a photocurrent density of 1.15 mA cm-2 at 1.23 VRHE were obtained. Theoretical calculations corroborate these experimental results, revealing that Nd doping narrows the bandgap, improves charge separation efficiency, and lowers the reaction potential barrier, thereby accelerating water oxidation kinetics. These findings underscore the effectiveness of surface cation exchange and targeted metallic element doping in overcoming the intrinsic limitations of Fe2O3, providing a viable pathway for developing high-performance PEC systems for efficient hydrogen production.

Current status of developed electrocatalysts for water splitting technologies: from experimental to industrial perspective

The conversion of electricity into hydrogen (H2) gas through electrochemical water splitting using efficient electrocatalysts has been one of the most important future technologies to create vast amounts of clean and renewable energy. Low-temperature electrolyzer systems, such as proton exchange membrane water electrolyzers, alkaline water electrolyzers, and anion exchange membrane water electrolyzers are at the forefront of current technologies. Their performance, however, generally depends on electricity costs and system efficiency, which can be significantly improved by developing high-performance electrocatalysts to enhance the kinetics of both the cathodic hydrogen evolution reaction and the anodic oxygen evolution reaction. Despite numerous active research efforts in catalyst development, the performance of water electrolysis remains insufficient for commercialization. Ongoing research into innovative electrocatalysts and an understanding of the catalytic mechanisms are critical to enhancing their activity and stability for electrolyzers. This is still a focus at academic institutes/universities and industrial R&D centers. Herein, we provide an overview of the current state and future directions of electrocatalysts and water electrolyzers for electrochemical H2 production. Additionally, we describe in detail the technological framework of electrocatalysts and water electrolyzers for H2 production as utilized by relevant global companies.

Toward Efficient Utilization of Photogenerated Charge Carriers in Photoelectrochemical Systems: Engineering Strategies from the Atomic Level to Configuration

Photoelectrochemical (PEC) systems are essential for solar energy conversion, addressing critical energy and environmental issues. However, the low efficiency in utilizing photogenerated charge carriers significantly limits overall energy conversion. Consequently, there is a growing focus on developing strategies to enhance photoelectrode performance. This review systematically explores recent advancements in PEC system modifications, spanning from atomic and nanoscopic levels to configuration engineering. We delve into the relationships between PEC structures, intrinsic properties, kinetics of photogenerated charge carriers, and their utilization. Additionally, we propose future directions and perspectives for developing more efficient PEC systems, offering valuable insights into potential innovations in the field.

Identifying key intermediates for the oxygen evolution reaction on hematite using ab-initio molecular dynamics

Hematite is a well-known catalyst for the oxygen evolution reaction on photoanodes in photoelectrochemical water-splitting cells. However, the knowledge of hematite-water interfaces and water oxidation mechanisms is still lacking, which limits improvements in photoelectrochemical water-splitting performance. Herein, we use the Fe-terminated hematite (0001) surface as a model and propose a comprehensive mechanism for the oxygen evolution reaction on both non-solvated and solvated surfaces. Key reaction intermediates are identified through ab initio molecular dynamics simulations at the density functional theory level with a Hubbard U correction. Several notable intermediates are proposed, and the effects of water solvent on these intermediates and the overall reaction mechanisms are suggested. The proposed mechanisms align well with experimental observations under photoelectrochemical water oxidation conditions. Additionally, we highlight the potential role of O2 desorption in the oxygen evolution reaction on hematite, as O2 adsorption may block reaction sites and increases surface hydrophobicity, leading to an unfavorable pathway for oxygen evolution.

Symmetry-Broken Steered Delocalization State in a Single-Atom Photocatalyst

Single-atom catalysts (SACs) that feature uniform metal active sites with symmetry configurations hold great promise in photocatalysis, while their catalytic efficiency is often restricted by the insufficient inherent activity. Drawing inspiration from hard-soft acid-base theory, here we propose that the delocalized electronic state of single-atom centers can be selectively modulated by adjusting their coordination symmetry, thereby optimizing the adsorption and activation of the reactant molecules. By taking ceria-based Ru-SAC (Ru-CeO2) as an example, we show that after introducing symmetry breaking, the Ru-CeO2 with an asymmetric Ru-O4 configuration (named P-Ru-CeO2) exhibits highly delocalized electrons with a soft acidic nature, leading to a much higher photocatalytic performance than for pristine Ru-CeO2 and CeO2 counterparts. The corresponding inherent mechanism was systematically investigated by spectroscopy and theoretical studies. This work provides an effective strategy for the design and controllable modulation of atomically dispersed catalysts with symmetry-broken configurations, thereby advancing applications in photocatalysis.

Probing Intra-Gap States Mediated Charge Dynamics of Rh-Doped Rutile TiO2 Photocatalyst by Light-Modulated Photocurrent Spectroscopies

The intra-gap states that are introduced into a semiconducting photocatalyst via dopants and other defects have significant implications on the transport dynamics of photoexcited electrons and holes during an aqueous light-driven reaction. In this work, mechanistic understanding of Rh-doped rutile, a promising photocatalyst for hydrogen production from water, is gained by systematic assessment combining intensity-modulated photocurrent spectroscopy with sub-gap excitations and alternating-current photocurrent spectroscopy. These operando techniques not only help in discovering a new electronic transport path in Rh-rutile via surface Rh4+ species and elucidating complex interaction between electrolyte molecules and semiconductors, but also underscore the potential of utilizing multiple sub-gap excitations synergistically. This combination offers a powerful tool for acquiring insight into photo-physical and photo-chemical behaviors of photo(electro)catalysts with intra-gap states.

Treasure-bowl style bifunctional site in cerium-tungsten hetero-clusters for superior solar-driven hydrogen production

Electrochemical water splitting powered by renewable energy sources hold potential for clean hydrogen production. However, there is still persistent challenges such as low solar-to-hydrogen conversion efficiency and sluggish oxygen evolution reactions. Here, we address the poor kinetics by studying and strengthening the coupling between Ce and W, and concurrently establishing Ce-W bi-atomic clusters on P,N-doped carbon (WN/WC-CeO2-x@PNC) with a "treasure-bowl" style. The bifunctional active sites are established using a novel and effective self-sacrificial strategy involving in situ induced defect formation. In addition, by altering the coupling of the W(d)-N(p) and W(d)-Ce(f) orbitals in the WN/WC-CeO2-x supramolecular clusters, we are able to disrupt the linear relationship between the binding energies of reaction intermediates, a key to obtain high catalytic performance for transition metals. Through the confinement of the WN/WC-CeO2-x composite hetero-clusters within the sub-nanometre spaces of hollow nano-bowl-shaped carbon reactors, a stable and efficient hydrogen production via water electrolysis could be achieved. When assembled together with a solar GaAs triple junction solar cell, a solar-to-hydrogen conversion efficiency of 18.92% in alkaline media could be realized. We show that the key to establish noble metal free catalysts with high efficiency lies in the fine-tuning of the metal-metal interface, forming regions with near optimal adsorption energies for the reaction intermediates participating in water electrolysis.

Charge Transfer Mechanism on a Cobalt-Polyoxometalate-TiO2 Photoanode for Water Oxidation in Acid

We constructed a photoanode comprising the homogeneous water oxidation catalyst (WOC) Na8K8[Co9(H2O)6(OH)3(HPO4)2(PW9O34)3] (Co9POM) and nanoporous n-type TiO2 photoelectrodes (henceforth "TiO2-Co9POM") by first anchoring the cationic 3-aminopropyltrimethoxysilane (APS) ligand on a metal oxide light absorber, followed by treatment of the metal oxide-APS with a solution of the polyoxometalate WOC. The resulting TiO2-Co9POM photoelectrode exhibits a 3-fold oxygen evolution photocurrent enhancement compared to bare TiO2 in aqueous acidic conditions. Three-element (Co 2p, W 4f, and O 1s) X-ray photoelectron spectroscopy and Raman spectroscopy studies before and after use indicate that surface-bound Co9POM retains its structural integrity throughout all photoelectrochemical water oxidation studies reported here. Extensive charge-transfer mechanistic studies by photoelectrochemical techniques and transient absorption spectroscopy elucidate that Co9POM serves as an efficient WOC, extracting photogenerated holes from TiO2 on the picosecond time scale. This is the first comprehensive mechanistic investigation elucidating the roles of polyoxometalates in POM-photoelectrode hybrid oxygen evolution reaction systems.

Efficient Acidic Photoelectrochemical Water Splitting Enabled by Ru Single Atoms Anchored on Hematite Photoanodes

Photoelectrochemical (PEC) water splitting in acidic media holds promise as an efficient approach to renewable hydrogen production. However, the development of highly active and stable photoanodes under acidic conditions remains a significant challenge. Herein, we demonstrate the remarkable water oxidation performance of Ru single atom decorated hematite (Fe2O3) photoanodes, resulting in a high photocurrent of 1.42 mA cm-2 at 1.23 VRHE under acidic conditions. Comprehensive experimental and theoretical investigations shed light on the mechanisms underlying the superior activity of the Ru-decorated photoanode. The presence of single Ru atoms enhances the separation and transfer of photogenerated carriers, facilitating efficient water oxidation kinetics on the Fe2O3 surface. This is achieved by creating additional energy levels within the Fe2O3 bandgap and optimizing the free adsorption energy of intermediates. These modifications effectively lower the energy barrier of the rate-determining step for water splitting, thereby promoting efficient PEC hydrogen production.

dz2 Band Links Frontier Orbitals and Charge Carrier Dynamics of Single-Atom Cocatalyst-Aided Photocatalytic H2 Production

The Cu single-atom catalyst (SAC) supported on TiO2 exhibits outstanding efficacy in photocatalytic hydrogen evolution. The precise operational mechanism remains a subject of ongoing debate. The focus resides with the interplay linking heightened catalytic activity, dynamic valence state alterations of Cu atoms, and their hybridization with H2O orbitals, manifested in catalyst color changes. Taking anatase TiO2 (101) as a prototypical surface, we perform ab initio quantum dynamics simulation to reveal that the high activity of the Cu-SAC is due to the quasi-planar coordination structure of the Cu atom after H2O adsorption, allowing it to trap photoexcited hot electrons and inject them into the hybridized orbital between Cu and H2O. The observed alterations in the valence state and the coloration can be attributed to the H atom released during H2O dissociation and adsorbed onto the lattice O atom neighboring the Cu-SAC. Notably, this adsorption of H atoms puts the Cu-SAC into an inert state, as opposed to an activating effect reported previously. Our work clarifies the relationship between the high photocatalytic activity and the local dynamic atomic coordination structure, providing atomistic insights into the structural changes occurring during photocatalytic reactions on SACs.

Solid-State Schikorr Reaction from Ferrous Chloride to Magnetite with Hydrogen Evolution as the Kinetic Bottleneck

The selective formation of meta-stable Fe3O4 from ferrous sources by suppressing its oxidative conversion to the most stable hematite (α-Fe2O3) is challenging under oxidative conditions for solid-state synthesis. In this work, we investigated the conversion of iron(II) chloride (FeCl2) to magnetite (Fe3O4) under inert atmosphere in the presence of steam, and the obtained oxides were analyzed by atomic-resolution TEM, 57Fe Mössbauer spectroscopy, and the Verwey transition temperature (Tv). The reaction proceeded in two steps, with H2O as the oxide source in the initial step and as an oxidant in the second step. The initial hydrolysis occurred at temperatures higher than 120 °C to release gaseous HCl, via substituting lattice chloride Cl- with oxide O2-, to give iron oxide intermediates. In the first step, the construction of the intermediate oxides was not topotactic. The second step as a kinetic bottleneck occurred at temperatures higher than 350 °C to generate gaseous H2 through the oxidation of FeII by H+. A substantially large kinetic isotope effect (KIE) was observed for the second step at 500 °C, and this indicates the rate-determining step is the hydrogen evolution. Quantitative analysis of evolved H2 revealed that full conversion of ferrous chloride to magnetite at 500 °C was followed by additional oxidation of the outer sphere of magnetite to give a Fe2O3 phase, as supported by X-ray photoelectron spectroscopy (XPS), and the outer phase confined the conductive magnetite phase within the insulating layers, enabling kinetic control of magnetite synthesis. As such, the reaction stopped at meta-stable magnetite with an excellent saturation magnetization (σs) of 86 emu g-1 and Tv > 120 K without affording the thermodynamically stable α-Fe2O3 as the major final product. The study also discusses the influence of parameters such as reaction temperature, initial grain size of FeCl2, the extent of hydration, and partial pressure of H2O.

Roles of Cobalt-Coordinated Polymeric Perylene Diimide in Hematite Photoanodes for Improved Water Oxidation

Interfacial charge recombination is a permanent issue that impedes the photon energy utilization in photoelectrochemical (PEC) water splitting. Herein, a conjugated polymer, urea linked perylene diimide polymer (PDI), is introduced to the designation of hematite-based composite photoanodes. On account of its unique molecule structure with abundant electronegative atoms, the O and N atoms with lone electron pairs can bond with Fe atoms at the surface of Zr4+ doped α-Fe2 O3 (Zr:Fe2 O3 ) and thus establish charge transfer channels for expediting hole separation and migration. Meanwhile, PDI molecules can passivate the surface states in Zr:Fe2 O3 , which is in favor of suppressing carrier recombination. Particularly, Co2+ is used to coordinate with PDI (Co-PDI) to accelerate hole extraction as well as utilization, and the as-obtained Co-PDI form type-II heterojunction with Zr:Fe2 O3 . Such a photoanode configuration takes advantage of the unique molecule structure of PDI, and the target Co-PDI/Zr:Fe2 O3 photoanodes eventually attain a photocurrent density of 2.17 mA cm-2 , which is inspirational for unearthing the potential use of conjugative molecules in PEC fields.

Low Catalyst Loading Enhances Charge Accumulation for Photoelectrochemical Water Splitting

Solar water oxidation is a critical step in artificial photosynthesis. Successful completion of the process requires four holes and releases four protons. It depends on the consecutive accumulation of charges at the active site. While recent research has shown an obvious dependence of the reaction kinetics on the hole concentrations on the surface of heterogeneous (photo)electrodes, little is known about how the catalyst density impacts the reaction rate. Using atomically dispersed Ir catalysts on hematite, we report a study on how the interplay between the catalyst density and the surface hole concentration influences the reaction kinetics. At low photon flux, where surface hole concentrations are low, faster charge transfer was observed on photoelectrodes with low catalyst density compared to high catalyst density; at high photon flux and high applied potentials, where surface hole concentrations are moderate or high, slower surface charge recombination was afforded by low-density catalysts. The results support that charge transfer between the light absorber and the catalyst is reversible; they reveal the unexpected benefits of low-density catalyst loading in facilitating forward charge transfer for desired chemical reactions. It is implied that for practical solar water splitting devices, a suitable catalyst loading is important for maximized performance.

Tandem cells for unbiased photoelectrochemical water splitting

Hydrogen is an essential energy carrier which will address the challenges posed by the energy crisis and climate change. Photoelectrochemical water splitting (PEC) is an important method for producing solar-powered hydrogen. The PEC tandem configuration harnesses sunlight as the exclusive energy source to drive both the hydrogen (HER) and oxygen evolution reactions (OER), simultaneously. Therefore, PEC tandem cells have been developed and gained tremendous interest in recent decades. This review describes the current status of the development of tandem cells for unbiased photoelectrochemical water splitting. The basic principles and prerequisites for constructing PEC tandem cells are introduced first. We then review various single photoelectrodes for use in water reduction or oxidation, and highlight the current state-of-the-art discoveries. Second, a close look into recent developments of PEC tandem cells in water splitting is provided. Finally, a perspective on the key challenges and prospects for the development of tandem cells for unbiased PEC water splitting are given.

Two-dimensional lateral anatase-rutile TiO2 phase junctions with oxygen vacancies for robust photoelectrochemical water splitting

Exploiting the photoelectrode materials with broad solar light response, high-efficient separation of photogenerated charges and abundant active sites is extremely vital yet enormously challenging. Herein, an innovative two-dimensional (2D) lateral anatase-rutile TiO₂ phase junctions with controllable oxygen vacancies perpendicularly aligned on Ti mesh is presented. Our experimental observations and theoretical calculations corroborate explicitly that the 2D lateral phase junctions together with three-dimensional arrays not only exhibit the high-efficient photogenerated charges separation guaranteed by the build-in electric field at the side-to-side interface, but also furnish enriching active sites. Moreover, the interfacial oxygen vacancies generate new defect energy levels and serve as electron donors, hence extending visible light response and further accelerating the separation and transfer of photogenerated charges. Profiting from these merits, the optimized photoelectrode yield a pronounced photocurrent density of 1.2 mA/cm² at 1.23 V vs. RHE with Faradic efficiency of 100%, which is approximately 2.4 times larger than that of pristine 2D TiO₂ nanosheets. Furthermore, the incident photon to current conversion efficiency (IPCE) of the optimized photoelectrode is also boosted within both ultraviolet and visible light regions. This research is envisioned deliver the new insight in developing the novel 2D lateral phase junctions for PEC applications.