Oxidation of Ni(II) to Ni(IV) with Aryl Electrophiles Enables Ni-Mediated Aryl-CF3 Coupling

Fundamental Principles in Catalysis from Mechanistic Studies of Oxidative Decarboxylative Coupling Reactions

ConspectusOxidative decarboxylative coupling (ODC) reactions have been recognized as powerful alternatives to traditional cross-coupling reactions due to the ability to generate (hetero)biaryl structures from simple and readily available carboxylic acid precursors. These reactions, however, are underdeveloped due to the requirement for ortho-nitrobenzoate coupling partners and silver salts as oxidants. Our research program has focused on the development of new catalytic ODC reactions, as well as mechanistic studies of these reactions to uncover the origin of these synthetic limitations. As the framework for these studies, we explored two key ODC reactions developed in our group: (1) a Ni-catalyzed decarboxylative arylation reaction that relies on silver as the oxidant and (2) a Cu-catalyzed decarboxylative thiolation reaction capable of operating under aerobic conditions. Our findings, disclosed in this Account, have uncovered the importance of the ortho-substituent and revealed that Ag-based oxidants are also responsible for mediating the decarboxylation and transmetalation steps.Systematic exploration of the decarboxylation of a series of well-defined Ag-benzoate complexes allowed us to probe the importance of the ortho-nitro group in the decarboxylation step. Kinetic measurements of a large series of differently substituted benzoates were found to correlate with the field effect (F) of the ortho-substituent, revealing this feature to be responsible for the enhanced reactivity of these favored benzoates.Our studies of the Ni-catalyzed decarboxylative arylation reaction uncovered an unexpected redox transmetalation step in this system. Synthesis and isolation of the proposed nickelacycle and Ag-aryl intermediates enabled direct study of the fundamental coupling steps. Catalytic and stoichiometric reactions of these complexes, paired with DFT calculations, supported a redox transmetalation step in which the Ag-aryl intermediate transfers the aryl ligand from AgI to NiII with concomitant oxidation to generate a NiIII-bis(aryl) intermediate.Finally, detailed mechanistic studies of our Cu-catalyzed decarboxylative thiolation reaction demonstrated how this catalyst system is able to use O2 as the terminal oxidant. Kinetic studies paired with the synthesis and reactivity of well-defined copper intermediates revealed decarboxylation from a CuI-benzoate resting state, despite the oxidizing reaction conditions which could support higher oxidation state intermediates. We also identified the intermediacy of diphenyl disulfide (PhSSPh) formed from the thiophenol (PhSH) coupling partner under the aerobic Cu-catalyzed conditions. The reaction of PhSSPh with the catalyst proceeds via oxidative transfer of the PhS fragment to CuI that is analogous to that of the redox transmetalation observed in Ni-catalyzed decarboxylative arylation.These studies combined suggest significant implications for ODC reactions more broadly. For example, it appears that silver is important for mediating the decarboxylation step when the catalyst is unable (as is the case with nickel) but is not needed when the catalyst is an efficient decarboxylation mediator on its own (as with copper). Furthermore, silver plays an additional role in mediating an oxidative transfer of the coupling partner in arylation reactions but is not required when the coupling partner is itself oxidizing (such as PhSSPh). We anticipate that these mechanistic insights will facilitate the development of new ODC reactions that operate under milder conditions and with broader substrate scopes.

Spectroscopic and Computational Interrogation of a High-Valent Nickel-Dialkyl Complex Indicates Electronic Structure Asymmetry Drives C-C Bond Formation Reactivity

The study of high-valent organometallic nickel compounds has gained considerable interest recently, primarily driven by the development of nickel-catalyzed alkyl-alkyl cross-coupling reactions that are proposed to employ such high-valent intermediates. In that regard, we have recently reported a formal Ni(III)-dimethyl intermediate supported by the ligand N,N',N″-triisopropyl-1,4,7-triazacyclononane (iPr3tacn) that can undergo rapid C-C reductive elimination and catalyze alkyl-alkyl Kumada cross-coupling reactions. The bulky nature of this tridentate ligand was suggested to lead to two geometrically and electronically inequivalent alkyl groups bound to the five-coordinate Ni center. Herein, we have employed pulsed electron paramagnetic resonance techniques such as electron nuclear double resonance, hyperfine sublevel correlation, and electron spin echo envelope modulation to provide strong experimental evidence for the geometrically and electronically inequivalent nature of the two methyl groups in which one methyl ligand can be better described as a methyl radical. These experimental results were supported by density functional theory computational methods used to probe the covalent nature of the Ni-C bonds and the formal Ni oxidation state assignment for this catalytically relevant, high-valent Ni intermediate. Moreover, computational investigation of a series of related methyl/alkyl analogs reveals that the radical character of an alkyl group increases for a tertiary vs a secondary vs a primary alkyl group, with direct relevance for alkyl-alkyl cross-coupling catalysis. Overall, this study provides valuable insights into the nature of organometallic Ni-dialkyl species that undergo efficient reductive elimination, likely through an SH2-type mechanism.

Synthesis of Iron(IV) Alkynylide Complexes and Their Reactivity to Form 1,3-Diynes

The isolation of thermally unstable and highly reactive organoiron(IV) complexes is a challenge for synthetic chemists. In particular, the number of examples where the C-based ligand is not part of the chelating ligand remains scarce. These compounds are of interest because they could pave the way to designing catalytic cycles of bond forming reactions proceeding via organoiron(IV) intermediates. Herein, we report the synthesis and characterization, including single-crystal X-ray diffraction, of a family of alkynylferrates(III) and Fe(IV) alkynylide complexes. The alkynylferrates(III) are formed by transmetalation of the Fe(III) precursor [(N3N')FeIII] (N3N'3- is tris(N-tert-butyldimethylsilyl-2-amidoethyl)amine) with lithium alkynylides, and their further one-electron oxidation enables the synthesis of the corresponding Fe(IV) alkynylides. The electronic structure of this family of organometallic Fe(III) and Fe(IV) complexes has been thoroughly investigated by spectroscopic methods (EPR, NMR, 57Fe Mössbauer, X-Ray absorption (XAS) and emission (XES) spectroscopies) and theoretical calculations. While alkynylferrates(III) are sluggish to engage into C-C bond forming processes, the Fe(IV) alkynylides react to afford 1,3-diynes at room temperature. A bimolecular reductive elimination from a bimetallic Fe(IV) intermediate to form the 1,3-diynes is proposed based on the mechanistic investigations performed.

Advances in accessing rare oxidation states of nickel for catalytic innovation

Nickel catalysis has experienced a renaissance over the past two decades, driven by its ability to access diverse oxidation states (0 to +4) and unique reactivity. This review consolidates the advancements in nickel chemistry, providing an overview of ligands that stabilize specific nickel oxidation states. The stability, reactivity, and catalytic applications of Ni0 sources, including in situ generation from air- and moisture-stable NiII precursors, are discussed, along with the roles of NiI and NiIII intermediates in catalytic cycles. The progress in synthesizing and utilizing NiIV complexes highlights their emerging importance in catalysis. Advances in spectroscopic and theoretical tools have enhanced the understanding of nickel's complex catalytic behavior.

Hemilabile and Redox-Active Quinone Ligands Unlock sp3-Rich Couplings in Nickel-Catalyzed Olefin Carbosulfenylation

A three-component coupling approach toward structurally complex dialkylsulfides is described via the nickel-catalyzed 1,2-carbosulfenylation of unactivated alkenes with organoboron nucleophiles and alkylsulfenamide (N-S) electrophiles. Efficient catalytic turnover is facilitated using a tailored N-S electrophile containing an N-methyl methanesulfonamide leaving group, allowing catalyst loadings as low as 1 mol %. Regioselectivity is controlled by a collection of monodentate, weakly coordinating native directing groups, including sulfonamides, amides, sulfinamides, phosphoramides, and carbamates. Key to the development of this transformation is the identification of quinones as a family of hemilabile and redox-active ligands that tune the steric and electronic properties of the metal throughout the catalytic cycle. Density functional theory (DFT) results show that the duroquinone (DQ) ligand adopts different coordination modes in different stages of the Ni-catalyzed 1,2-carbosulfenylation-binding as an η6 capping ligand to stabilize the precatalyst/resting state and prevent catalyst decomposition, binding as an X-type redox-active durosemiquinone radical anion to promote alkene migratory insertion with a less distorted square planar Ni(II) center, and binding as an L-type ligand to promote N-S oxidative addition at a relatively more electron-rich Ni(I) center.

Copper-Mediated -CF(OCF3)(CF2H) Transfer to Organic Electrophiles

The integration of fluorine into medicinal compounds has become a widely used strategy to improve the biochemical and therapeutic properties of drugs. Inclusion of -CF2H and -OCF3 fluoroalkyl groups has garnered attention due to their bioisosteric properties, enhanced lipophilicity, and potential hydrogen-bonding capability in bioactive substances. In this study, we prepared a series of stable Cu[CF(OCF3)(CF2H)]L n complexes by insertion of commercially available perfluoro(methyl vinyl ether), CF2=CF(OCF3), into Cu-H bonds derived from Stryker's reagent, [CuH(PPh3)]6, using ancillary ligands L. Notably, certain of these complexes effectively transfer the fluoroalkyl group to aroyl chlorides. Through reaction optimization and computational analysis, we identified dimethylsulfoxide as a pivotal coligand, playing a distinctive role in enabling the fluoroalkylation of a range of aroyl chlorides and aryl iodides. The latter also benefits from addition of CuBr to abstract PPh3, generating solvent-stabilized Cu[CF(OCF3)(CF2H)]. These methodologies allow for the introduction of geminal -OCF3 and -CF2H groups in a single transformation.

Gradual spin crossover behavior encompasing room temperature in an iron(II) complex based on a heteroscorpionate ligand

In this paper, we report the synthesis of six novel triazole-based heteroscorpionate ligands based on heterocycle metathesis reactions and their iron(II) complexes. Single crystal structure analyses were performed, the spectroscopic and magnetic properties of the obtained complexes were studied and their spin crossover-structural relationships were compared to those obtained for their pyrazole-based analogues reported in the literature. In particular, the amino derivative complex bis[hydrobis(pyrazol-1-yl)(3-amino-1,2,4-triazol-1-yl)]iron(II) obtained by post-synthetic catalytic nitro-group reduction under pressure of hydrogen in an autoclave presents a scarce gradual spin crossover behavior at room temperature. The profile of the SCO curve can be explained by the presence of only relatively weak H bonds, spreading only in one dimension. Among the interesting spin transition behaviors observed for the different complexes, such stable, complete and gradual spin crossover at room temperature makes this neutral complex a good candidate for sublimation and future investigation as an active element notably for thermoreflectance-based surface microthermometry applications.

Metal- versus ligand-centered reactivity of a cobalt-phenylenediamide complex with electrophiles

A new series of [CoIII-CF3]n+ complexes supported by a bidentate redox-active ligand is presented. The cationic [Co-CF3]+ complex was first obtained by reacting [CpCo(tBuUreaopda)] (Cp = cyclopentadienyl, opda = o-phenylenediamide) with an electrophilic trifluoromethyl source, for which the redox-active phenylenediamide ligand serves as a 2e- reservoir to generate [CpCp(tBuUreabqdi)(CF3)]+ (bqdi = benzoquinonediimine). Electrochemical studies of [Co-CF3]+ revealed two reversible 1e- reductions. Chemical reduction with 1 or 2 equiv. reducing agent enabled isolation of the neutral and anionic complexes, respectively, where the [CoIII-CF3] bond remains intact in all three oxidation states (n = +1, 0, -1). Structural analysis shows systematic changes to the redox-active ligand backbone upon reduction, consistent with sequential ligand-centered electron transfer in the series [bqdi]0 to [s-bqdi]˙- to [opda]2-. In contrast, the reaction of [CpCo(tBuUreaopda)] with alkyl triflates resulted in ligand-centered alkylation at the ureayl groups instead of the targeted Co-alkyl bond formation, suggesting less favorable bond formation at cobalt and greater nucleophilic accessibility of the ligand compared to the metal center.

Oxidation States: Intrinsically Ambiguous?

The oxidation state ( OS ) formalism is a much-appreciated good in chemistry, receiving wide application. However, like all formalisms, limitations are inescapable, some of which have been recently explored. Providing a broader context, we discuss the OS and its interpretation from a computational perspective for transition metal (TM) complexes. We define a broadly applicable and easy-to-use procedure to derive OS s based on quantum chemical calculations, via the use of localized orbitals, dubbed the Intrinsic OS . Applying this approach to a cobalt complex in five OS s, isolated by Hunter and co-workers (Inorg. Chem.2021, 60, 17445), we find that the calculated Intrinsic OS matches the formal OS , consistent with the experimental characterization. Through analysis of the delocalized orbitals, the ligand field of the Co(III) complex is found to be "inverted", despite every cobalt-ligand bond being classically dative from the localized perspective-a bonding scenario very similar to that of [Cu(CF3)4]-. This is not atypical but rather a natural consequence of these metals bonding in the high-valent region, and we propose a more restrictive definition of (locally) inverted bonding. Additionally, two bonding descriptors within the Intrinsic Bonding Orbital (IBO) framework (σ-gain and π-loss) are introduced, which enable facile quantification of electron-sharing covalency across a broad range of TM complexes.

Speciation and Reactivity of Mono- and Binuclear Ni Intermediates in Aminoquinoline-Directed C-H Arylation and Benzylation

This paper describes detailed organometallic studies of the aminoquinoline-directed Ni-catalyzed C-H functionalization of 2,3,4,5-tetrafluoro-N-(quinolin-8-yl)benzamide with diaryliodonium reagents. A combination of 19F NMR spectroscopy and X-ray crystallography is used to track and characterize diamagnetic and paramagnetic intermediates throughout this transformation. These provide key insights into both the cyclometalation and oxidative functionalization steps of the catalytic cycle. The reaction conditions (solvent, ligands, base, and stoichiometry) play a central role in the observation of a NiII precyclometalation intermediate as well as in the speciation of the NiII products of C-H activation. Both mono- and binuclear cyclometalated NiII species are observed and interconvert, depending on the reaction conditions. Cyclic voltammetry reveals that the NiII/III redox potentials for the cyclometalated intermediates vary by more than 700 mV depending on their coordination environments, and these differences are reflected in their relative reactivity with diaryliodonium oxidants. The oxidative functionalization reaction affords a mixture of arylated and solvent functionalization organic products, depending on the conditions and solvent. For example, conducting oxidation in toluene leads to the preferential formation of the benzylated product. A series of experiments implicate a NiII/III/IV pathway for this transformation.

Catalytically Relevant Organocopper(III) Complexes Formed through Aryl-Radical-Enabled Oxidative Addition

Stepwise oxidative addition of copper(I) complexes to form copper(III) species via single electron transfer (SET) events has been widely proposed in copper catalysis. However, direct observation and detailed investigation of these fundamental steps remain elusive owing largely to the typically slow oxidative addition rate of copper(I) complexes and the instability of the copper(III) species. We report herein a novel aryl-radical-enabled stepwise oxidative addition pathway that allows for the formation of well-defined alkyl-CuIII species from CuI complexes. The process is enabled by the SET from a CuI species to an aryl diazonium salt to form a CuII species and an aryl radical. Subsequent iodine abstraction from an alkyl iodide by the aryl radical affords an alkyl radical, which then reacts with the CuII species to form the alkyl-CuIII complex. The structure of resultant [(bpy)CuIII(CF3)2(alkyl)] complexes has been characterized by NMR spectroscopy and X-ray crystallography. Competition experiments have revealed that the rate at which different alkyl iodides undergo oxidative addition is consistent with the rate of iodine abstraction by carbon-centered radicals. The CuII intermediate formed during the SET process has been identified as a four-coordinate complex, [CuII(CH3CN)2(CF3)2], through electronic paramagnetic resonance (EPR) studies. The catalytic relevance of the high-valent organo-CuIII has been demonstrated by the C-C bond-forming reductive elimination reactivity. Finally, localized orbital bonding analysis of these formal CuIII complexes indicates inverted ligand fields in σ(Cu-CH2) bonds. These results demonstrate the stepwise oxidative addition in copper catalysis and provide a general strategy to investigate the elusive formal CuIII complexes.

A free-radical design featuring an intramolecular migration for a synthetically versatile alkyl-(hetero)arylation of simple olefins

A free-radical approach has enabled the development of a synthetically versatile alkyl-(hetero)arylation of olefins. Alkyl and (hetero)aryl groups were added concurrently to a full suite of mono- to tetrasubstituted simple alkenes (i.e., without requiring directing or electronically activating groups) for the first time. Key advances also included the introduction of synthetically diversifiable alkyl groups featuring different degrees of substitution, good diastereocontrol in both cyclic and acyclic settings, the addition of biologically valuable heteroarenes featuring Lewis basic nitrogen atoms as well as simple benzenes, and the generation of either tertiary or quaternary benzylic centers. The synthetic potential of this transformation was demonstrated by leveraging it as the key step in a concise synthesis of oliceridine, a new painkiller that received FDA approval in 2020.

Catalytic C-H Trifluoromethylation of Arenes and Heteroarenes via Visible Light Photoexcitation of a Co(III)-CF3 Complex

A cobalt photocatalyst for direct trifluoromethylation of (hetero)arene C(sp2)-H bonds is described and shown to operate via visible light activation of a Co-CF3 intermediate, which functions as a combined chromophore and organometallic reaction center. Chemical oxidations of previously reported (OCO)Co complexes containing a redox-active [OCO] pincer ligand afford a Co-CF3 complex two oxidation states above Co(II). Computational and spectroscopic studies are consistent with formulation of the product as [(OCO•)CoIII(CF3)(THF)(OTf)] (II) containing an open-shell [OCO•]1- radical ligand bound to a S = 0 Co(III) center. II is thermodynamically stable, but exposure to blue (440 nm) light induces Co-CF3 bond homolysis and release of •CF3, which is trapped by radical acceptors including TEMPO•, (hetero)arenes, or the radical [OCO•] ligand in II. The latter comprises a competitive degradation pathway, which is overcome under catalytic conditions by using excess substrate. Accordingly, generation of II from the reaction of [(OCO)CoIIL] (III) (L = THF, MeCN) with Umemoto's dibenzothiophenium trifluoromethylating reagent (1) followed by photolytic Co-CF3 bond activation completes a photoredox catalytic cycle for C-H (hetero)arene trifluoromethylation utilizing visible light. Electronic structure and photophysical studies, including time-dependent density functional theory (TDDFT) calculations, suggest that Co-CF3 bond homolysis at II occurs via an ligand-to-metal charge-transfer (LMCT) (OCO0)CoII(CF3) state, revealing ligand redox activity as a critical design feature and establishing design principles for the use of base metal chromophores for selectivity in photoredox bond activations occurring via free radical intermediates.

Scrutinizing formally NiIV centers through the lenses of core spectroscopy, molecular orbital theory, and valence bond theory

Nickel K- and L2,3-edge X-ray absorption spectra (XAS) are discussed for 16 complexes and complex ions with nickel centers spanning a range of formal oxidation states from II to IV. K-edge XAS alone is shown to be an ambiguous metric of physical oxidation state for these Ni complexes. Meanwhile, L2,3-edge XAS reveals that the physical d-counts of the formally NiIV compounds measured lie well above the d6 count implied by the oxidation state formalism. The generality of this phenomenon is explored computationally by scrutinizing 8 additional complexes. The extreme case of NiF62- is considered using high-level molecular orbital approaches as well as advanced valence bond methods. The emergent electronic structure picture reveals that even highly electronegative F-donors are incapable of supporting a physical d6 NiIV center. The reactivity of NiIV complexes is then discussed, highlighting the dominant role of the ligands in this chemistry over that of the metal centers.

A Redox Transmetalation Step in Nickel-Catalyzed C-C Coupling Reactions

Ni-catalyzed C-H functionalization reactions are becoming efficient routes to access a variety of functionalized arenes, yet the mechanisms of these catalytic C-C coupling reactions are not well understood. Here, we report the catalytic and stoichiometric arylation reactions of a nickel(II) metallacycle. Treatment of this species with silver(I)-aryl complexes results in facile arylation, consistent with a redox transmetalation step. Additionally, treatment with electrophilic coupling partners generates C-C and C-S bonds. We anticipate that this redox transmetalation step may be relevant to other coupling reactions that employ silver salts as additives.

Enantioselective C(sp3)-H Functionalization of Oxacycles via Photo-HAT/Nickel Dual Catalysis

The selective functionalization of ubiquitous but inert C-H bonds is highly appealing in synthetic chemistry, but the direct transformation of hydrocarbons lacking directing groups into high-value chiral molecules remains a formidable challenge. Herein, we develop an enantioselective C(sp³)-H functionalization of undirected oxacycles via photo-HAT/nickel dual catalysis. This protocol provides a practical platform for the rapid construction of high-value and enantiomerically enriched oxacycles directly from simple and abundant hydrocarbon feedstocks. The synthetic utility of this strategy is further demonstrated in the late-stage functionalization of natural products and the synthesis of many pharmaceutically relevant molecules. Experimental and density functional theory calculation studies provide detailed insights into the mechanism and the origin of enantioselectivity for the asymmetric C(sp³)-H functionalization.

Effect of Redox-Inactive Metal Ion-Nickel(III) Interactions on the Redox Properties and Proton-Coupled Electron Transfer Reactivity

Mononuclear nickel(II) and nickel(III) complexes of a bisamidate-bisalkoxide ligand, (NMe₄)₂[Ni^II(HMPAB)] (1) and (NMe₄)[Ni^III(HMPAB)] (2), respectively, have been synthesized and characterized by various spectroscopic techniques including X-ray crystallography. The reaction of redox-inactive metal ions (Mⁿ⁺ = Ca²⁺, Mg²⁺, Zn²⁺, Y³⁺, and Sc³⁺) with 2 resulted in 2-Mⁿ⁺ adducts, which was assessed by an array of spectroscopic techniques including X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and reactivity studies. The X-ray structure of Ca²⁺ coordinated to Ni(III) complexes, 2-Ca²⁺T, was determined and exhibited an average Ni-Ca distance of 3.1253 Å, close to the metal ions' covalent radius. XAS analysis of 2-Ca²⁺ and 2-Y³⁺ in solution further revealed an additional coordination to Ca and Y in the 2-Mⁿ⁺ adducts with shortened Ni-M distances of 2.15 and 2.11 Å, respectively, implying direct bonding interactions between Ni and Lewis acids (LAs). Such a short interatomic distance between Ni(III) and M is unprecedented and was not observed before. EPR analysis of 2 and 2-Mⁿ⁺ species, moreover, displayed rhombic signals with g_av > 2.12 for all complexes, supporting the +III oxidation state of Ni. The Ni^III/Ni^II redox potential of 2 and 2-Mⁿ⁺ species was determined, and a plot of E_1/2 of 2-Mⁿ⁺ versus pK_a of [M(H₂O)_n]^m+ exhibited a linear relationship, implying that the Ni^III/Ni^II potential of 2 can be tuned with different redox-inactive metal ions. Reactivity studies of 2 and 2-Mⁿ⁺ with different 4-X-2,6-ditert-butylphenol (4-X-DTBP) and other phenol derivatives were performed, and based on kinetic studies, we propose the involvement of a proton-coupled electron transfer (PCET) pathway. Analysis of the reaction products after the reaction of 2 with 4-OMe-DTBP showed the formation of a Ni(II) complex (1a) where one of the alkoxide arms of the ligand is protonated. A pK_a value of 24.2 was estimated for 1a. The reaction of 2-Mⁿ⁺ species was examined with 4-OMe-DTBP, and it was observed that the k₂ values of 2-Mⁿ⁺ species increase by increasing the Lewis acidity of redox-inactive metal ions. However, the obtained k₂ values for 2-Mⁿ⁺ species are much lower compared to the k₂ value for 2. Such a variation of PCET reactivity between 2 and 2-Mⁿ⁺ species may be attributed to the interactions between Ni(III) and LAs. Our findings show the significance of the secondary coordination sphere effect on the PCET reactivity of Ni(III) complexes and furnish important insights into the reaction mechanism involving high-valent nickel species, which are frequently invoked as key intermediates in Ni-mediated enzymatic reactions, solar-fuel catalysis, and biomimetic/synthetic transformation reactions.

Carboxylate as a Non-innocent L-Ligand: Computational and Experimental Search for Metal-Bound Carboxylate Radicals

We show that the carboxylate radical acts as an L-ligand with certain high-spin transition metal centers. Such coordination preserves the O-radical character needed for C-H activation via hydrogen atom transfer. Capture of the new C-radical by the metal and subsequent reductive elimination leads to formal C-H acyloxylation. Decarboxylation of the RCO₂ radical is minimized through hybridization effects introduced by spiro-cyclopropyl moiety.

Synthesis of FeIII and FeIV Cyanide Complexes Using Hypervalent Iodine Reagents as Cyano-Transfer One-Electron Oxidants

We disclose a new reactivity mode for electrophilic cyano λ3 -iodanes as group transfer one-electron oxidants to synthesize FeIII and FeIV cyanide complexes. The inherent thermal instability of high-valent FeIV compounds without π-donor ligands (such as oxido (O2- ), imido (RN2- ) or nitrido (N3- )) makes their isolation and structural characterization a very challenging task. We report the synthesis of an FeIV cyanide complex [(N3 N')FeCN] (4) by two consecutive single electron transfer (SET) processes from FeII precursor [(N3 N')FeLi(THF)] (1) with cyanobenziodoxolone (CBX). The FeIV complex can also be prepared by reaction of [(N3 N')FeIII ] (3) with CBX. In contrast, the oxidation of FeII with 1-cyano-3,3-dimethyl-3-(1H)-1,2-benziodoxole (CDBX) enables the preparation of FeIII cyanide complex [(N3 N')FeIII (CN)(Li)(THF)3 ] (2-LiTHF ). Complexes 4 and 2-LiTHF have been structurally characterized by single crystal X-ray diffraction and their electronic structure has been examined by Mössbauer, EPR spectroscopy, and computational analyses.

Synthesis, structure, and electrochemical properties of [LNi(Rf)(C4F8)]- and [LNi(Rf)3]- complexes

The new anionic nickelate complexes [(MeCN)Ni(C₄F₈)(CF₃)]^-, [(MeCN)Ni(C₄F₈)(C₂F₅)]^-, [(IMes)Ni(C₄F₈)(CF₃)]^-, [(IMes)Ni(CF₃)₃]^- (IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), and [(F-NHC)Ni(R_f)₃]^- (F-NHC = 1,3-bis(2,4-F₂Ph), 2,4,6-F₃Ph- or 3,4,5-F₃Ph)imidazol-2-ylidene; (R_f = CF₃ or C₂F₅) were synthesized and structurally characterized. The electrochemical properties of all new compounds were revealed by cyclic voltammetry studies and compared to the known CF₃ analogue [(MeCN)Ni(CF₃)₃]^-. The IMes-coordinated complexes exhibited initial oxidation events that were well-separated from a second oxidation process in the cyclic voltammograms. The complexes containing F-substituted NHC ligands [(F-NHC)Ni(CF₃)₃]^- are structurally quite similar to the IMes derivative and reveal also two separated oxidation waves in their cyclic voltammograms. The absolute potentials as well as the separation between the two waves vary with the substitution pattern, suggesting that the NHC ligand environment (NHC = N-heterocyclic carbene) is an interesting platform for the development of new redox-triggered reactions that release trifluoromethyl and perfluoroalkyl radicals upon oxidation.

Oxidative C–C/C–X coupling in organometallic nickel complexes: insights from DFT

NiIII and NiIV-center complexes prefer direct reductive elimination than reacting through five-coordinate intermediates. 32+ complex in the presence of Cl− undergoes Cl–Csp2 elimination preferably over Cl–Csp3 and Csp3–Csp2 elimination.

Precise control of the degree and regioselectivity of functionalization in nitro- and amino-functionalized di(trispyrazolylborato)iron(II) spin crossover complexes

Di(trispyrazolylborato)iron(II) ([Tp₂Fe]) complexes represent one of the most robust classes of spin-crossover complexes. Their stability renders them particularly suitable for integration in nanoscale devices, e.g. as sensors or information storage units. While prior studies of the functionalization of those derivatives have been focused on the electronic and steric effects of alkyl and -CF₃ groups in position 3, a pyrazole exchange reaction between nitropyrazole and either trispyrazolylborate or its iron complex allows the regioselective installation of nitro substituents in positions 3, 4 and 5 of the [Tp₂Fe] complexes. The degree of substitution can be varied from 1 to 4 functionalized pyrazoles per complex. The amine-functionalized analogues are accessed by reduction of the nitro analogues under hydrogen transfer conditions. With the exception of di- and tetra-3-NO₂ substituted complexes, all derivatives display spin crossover properties in the solid state, with transition temperatures ranging from 180 to 380 K and showing different degrees of abruptness but no hysteresis. The Slichter-Drickamer model was used to extract the empirical thermodynamic transition parameters, allowing a systematic investigation of the influence of stoichiometry, position, and electronic nature of the substitution on the magnetic properties of the complexes. The steric effects dominate for substitution in position 3 but the electronic effects are significant for the other positions.

Photoinduced Trifluoromethylation of Arenes and Heteroarenes Catalyzed by High-Valent Nickel Complexes

We describe a series of air-stable Ni^III complexes supported by a simple, robust naphthyridine-based ligand. Access to the high-valent oxidation state is enabled by the CF₃ ligands on the nickel, while the naphthyridine exhibits either a monodentate or bidentate coordination mode that depends on the oxidation state and sterics, and enables facile aerobic oxidation of Ni^II to Ni^III . These Ni^III complexes act as efficient catalysts for photoinduced C(sp² )-H bond trifluoromethylation reactions of (hetero)arenes using versatile synthetic protocols. This blue LED light-mediated catalytic protocol proceeds via a radical pathway and demonstrates potential in the late-stage functionalization of drug analogs.

Cross-Coupling through Ag(I)/Ag(III) Redox Manifold

In ample variety of transformations, the presence of silver as an additive or co-catalyst is believed to be innocuous for the efficiency of the operating metal catalyst. Even though Ag additives are required often as coupling partners, oxidants or halide scavengers, its role as a catalytically competent species is widely neglected in cross-coupling reactions. Most likely, this is due to the erroneously assumed incapacity of Ag to undergo 2e^- redox steps. Definite proof is herein provided for the required elementary steps to accomplish the oxidative trifluoromethylation of arenes through Ag^I /Ag^III redox catalysis (i. e. CEL coupling), namely: i) easy Ag^I /Ag^III 2e^- oxidation mediated by air; ii) bpy/phen ligation to Ag^III ; iii) boron-to-Ag^III aryl transfer; and iv) ulterior reductive elimination of benzotrifluorides from an [aryl-Ag^III -CF₃ ] fragment. More precisely, an ultimate entry and full characterization of organosilver(III) compounds [K]⁺ [Ag^III (CF₃ )₄ ]^- (K-1), [(bpy)Ag^III (CF₃ )₃ ] (2) and [(phen)Ag^III (CF₃ )₃ ] (3), is described. The utility of 3 in cross-coupling has been showcased unambiguously, and a large variety of arylboron compounds was trifluoromethylated via [Ag^III (aryl)(CF₃ )₃ ]^- intermediates. This work breaks with old stereotypes and misconceptions regarding the inability of Ag to undergo cross-coupling by itself.

On the Origins of Some Spectroscopic Properties of "Purple Iron" (the Tetraoxoferrate(VI) Ion) and Its Pourbaix Safe-Space

In this work, the authors attempt to interpret the visible, infrared and Raman spectra of ferrate(VI) by means of theoretical physical-inorganic chemistry and historical highlights in this field of interest. In addition, the sacrificial decomposition of ferrate(VI) during water treatment will also be discussed together with a brief mention of how Rayleigh scattering caused by the decomposition of Fe^VIO₄²⁻ may render absorbance readings erroneous. This work is not a compendium of all the instrumental methods of analysis which have been deployed to identify ferrate(VI) or to study its plethora of reactions, but mention will be made of the relevant techniques (e.g., Mössbauer Spectroscopy amongst others) which support and advance this overall discourse at appropriate junctures, without undue elaboration on the foundational physics of these techniques.

Controlling One-Electron vs Two-Electron Pathways in the Multi-Electron Redox Cycle of Nickel Diethyldithiocarbamate

The unique redox cycle of Ni^II(dtc)₂, where dtc^- is N,N-diethyldithiocarbamate, in acetonitrile displays 2e^- redox chemistry upon oxidation from Ni^II(dtc)₂ → [Ni^IV(dtc)₃]⁺ but 1e^- redox chemistry upon reduction from [Ni^IV(dtc)₃]⁺ → Ni^III(dtc)₃ → Ni^II(dtc)₂. The underlying reasons for this cycle lie in the structural changes that occur between four-coordinate Ni^II(dtc)₂ and six-coordinate [Ni^IV(dtc)₃]⁺. Cyclic voltammetry (CV) experiments show that these 1e^- and 2e^- pathways can be controlled by the addition of pyridine-based ligands (L) to the electrolyte solution. Specifically, the addition of these ligands resulted in a 1e^- ligand-coupled electron transfer (LCET) redox wave, which produced a mixture of pyridine-bound Ni(III) complexes, [Ni^III(dtc)₂(L)]⁺, and [Ni^III(dtc)₂(L)₂]⁺. Although the complexes could not be isolated, electron paramagnetic resonance (EPR) measurements using a chemical oxidant in the presence of 4-methoxypyridine confirmed the formation of trans-[Ni^III(dtc)₂(L)₂]⁺. Density functional theory calculations were also used to support the formation of pyridine coordinated Ni(III) complexes through structural optimization and calculation of EPR parameters. The reversibility of the LCET process was found to be dependent on both the basicity of the pyridine ligand and the scan rate of the CV experiment. For strongly basic pyridines (e.g., 4-methoxypyridine) and/or fast scan rates, high reversibility was achieved, allowing [Ni^III(dtc)₂(L)_x]⁺ to be reduced directly back to Ni^II(dtc)₂ + xL. For weakly basic pyridines (e.g., 3-bromopyridine) and/or slow scan rates, [Ni^III(dtc)₂(L)_x]⁺ decayed irreversibly to form [Ni^IV(dtc)₃]⁺. Detailed kinetics studies using CV reveal that [Ni^III(dtc)₂(L)]⁺ and [Ni^III(dtc)₂(L)₂]⁺ decay by parallel pathways due to a small equilibrium between the two species. The rate constants for ligand dissociation ([Ni^III(dtc)₂(L)₂]⁺ → [Ni^III(dtc)₂(L)]⁺ + L) along with decomposition of [Ni^III(dtc)₂(L)]⁺ and [Ni^III(dtc)₂(L)₂]⁺ species were found to increase with the electron-withdrawing character of the pyridine ligand, indicating pyridine dissociation is likely the rate-limiting step for decomposition of these complexes. These studies establish a general trend for kinetically trapping 1e^- intermediates along a 2e^- oxidation path.

Solvated Nickel Complexes as Stoichiometric and Catalytic Perfluoroalkylation Agents*

The acetonitrile-solvated [(MeCN)Ni(C₂ F₅ )₃ ]^- was prepared in order to compare and contrast its reactivity with the known [(MeCN)Ni(CF₃ )₃ ]^- towards organic electrophiles. Both [(MeCN)Ni(CF₃ )₃ ]^- and [(MeCN)Ni(C₂ F₅ )₃ ]^- successfully react with aryl iodonium and diazonium salts as well as alkynyl iodonium salts to give fluoroalkylated organic products. Electrochemical analysis of [(MeCN)Ni^II (C₂ F₅ )₃ ]^- suggests that, upon electro-oxidation to [(MeCN)_n Ni^III (C₂ F₅ )₃ ], reductive homolysis of a perfluoroethyl radical occurs, with the concomitant formation of [(MeCN)₂ Ni^II (C₂ F₅ )₂ ]. Catalytic C-H trifluoromethylations of electron-rich arenes were successfully achieved using either [(MeCN)Ni(CF₃ )₃ ]^- or the related [Ni(CF₃ )₄ ]^2- . Stoichiometric reactions of the solvated nickel complexes reveal that "ligandless" nickel is exceptionally capable of serving as reservoir of CF₃ groups under catalytically relevant conditions.

Dialkyl Ether Formation at High-Valent Nickel

In this article, we investigated the I2-promoted cyclic dialkyl ether formation from 6-membered oxanickelacycles originally reported by Hillhouse. A detailed mechanistic investigation based on spectroscopic and crystallographic analysis revealed that a putative reductive elimination to forge C(sp3)-OC(sp3) using I2 might not be operative. We isolated a paramagnetic bimetallic NiIII intermediate featuring a unique Ni2(OR)2 (OR = alkoxide) diamond-like core complemented by a μ-iodo bridge between the two Ni centers, which remains stable at low temperatures, thus permitting its characterization by NMR, EPR, X-ray, and HRMS. At higher temperatures (>-10 °C), such bimetallic intermediate thermally decomposes to afford large amounts of elimination products together with iodoalkanols. Observation of the latter suggests that a C(sp3)-I bond reductive elimination occurs preferentially to any other challenging C-O bond reductive elimination. Formation of cyclized THF rings is then believed to occur through cyclization of an alcohol/alkoxide to the recently forged C(sp3)-I bond. The results of this article indicate that the use of F+ oxidants permits the challenging C(sp3)-OC(sp3) bond formation at a high-valent nickel center to proceed in good yields while minimizing deleterious elimination reactions. Preliminary investigations suggest the involvement of a high-valent bimetallic NiIII intermediate which rapidly extrudes the C-O bond product at remarkably low temperatures. The new set of conditions permitted the elusive synthesis of diethyl ether through reductive elimination, a remarkable feature currently beyond the scope of Ni.

Nickel-Mediated Trifluoromethylation of Phenol Derivatives by Aryl C-O Bond Activation

The increasing pharmaceutical importance of trifluoromethylarenes has stimulated the development of more efficient trifluoromethylation reactions. Tremendous efforts have focused on copper- and palladium-mediated/catalyzed trifluoromethylation of aryl halides. In contrast, no general method exists for the conversion of widely available inert electrophiles, such as phenol derivatives, into the corresponding trifluoromethylated arenes. Reported herein is a practical nickel-mediated trifluoromethylation of phenol derivatives with readily available trimethyl(trifluoromethyl)silane (TMSCF₃ ). The strategy relies on PMe₃ -promoted oxidative addition and transmetalation, and CCl₃ CN-induced reductive elimination. The broad utility of this transformation has been demonstrated through the direct incorporation of trifluoromethyl into aromatic and heteroaromatic systems, including biorelevant compounds.

Bismuth-Catalyzed Oxidative Coupling of Arylboronic Acids with Triflate and Nonaflate Salts

Herein we present a Bi-catalyzed cross-coupling of arylboronic acids with perfluoroalkyl sulfonate salts based on a Bi(III)/Bi(V) redox cycle. An electron-deficient sulfone ligand proved to be key for the successful implementation of this protocol, which allows the unusual construction of C(sp²)–O bonds using commercially available NaOTf and KONf as coupling partners. Preliminary mechanistic studies as well as theoretical investigations reveal the intermediacy of a highly electrophilic Bi(V) species, which rapidly eliminates phenyl triflate.

Multicomponent Pyrazole Synthesis from Alkynes, Nitriles, and Titanium Imido Complexes via Oxidatively Induced N-N Bond Coupling

Pyrazoles are an important class of heterocycles found in a wide range of bioactive compounds and pharmaceuticals. Pyrazole synthesis often requires hydrazine or related reagents where an intact N-N bond is conservatively installed into a pyrazole precursor fragment. Herein, we report the multicomponent oxidative coupling of alkynes, nitriles, and Ti imido complexes for the synthesis of multisubstituted pyrazoles. This modular method avoids potentially hazardous reagents like hydrazine, instead forming the N-N bond in the final step via oxidation-induced coupling on Ti. The mechanism of this transformation has been studied in-depth through stoichiometric reactions of the key diazatitanacyclohexadiene intermediate, which can be accessed via multicomponent coupling of Ti imidos with nitriles and alkynes, ring opening of 2-imino-2H-azirines, or direct metalation of 4-azadiene-1-amine derivatives. The critical transformation in this reaction is the 2-electron oxidation-induced N-N coupling on Ti. This is a rare example of formal N-N coupling on a metal center, which likely occurs through an electrocyclic mechanism analogous to a Nazarov cyclization. Conveniently, these 2-electron-oxidized diazatitanacyclohexadiene intermediates can be accessed via disproportionation of the 1-electron-oxidized species, which allows utilization of weak oxidants such as TEMPO.

High-Valent NiIII and NiIV Species Relevant to C-C and C-Heteroatom Cross-Coupling Reactions: State of the Art

Ni catalysis constitutes an active research arena with notable applications in diverse fields. By analogy with its parent element palladium, Ni catalysts provide an appealing entry to build molecular complexity via cross-coupling reactions. While Pd catalysts typically involve a M⁰/M^II redox scenario, in the case of Ni congeners the mechanistic elucidation becomes more challenging due to their innate properties (like enhanced reactivity, propensity to undergo single electron transformations vs. 2e⁻ redox sequences or weaker M–Ligand interaction). In recent years, mechanistic studies have demonstrated the participation of high-valent Ni^III and Ni^IV species in a plethora of cross-coupling events, thus accessing novel synthetic schemes and unprecedented transformations. This comprehensive review collects the main contributions effected within this topic, and focuses on the key role of isolated and/or spectroscopically identified Ni^III and Ni^IV complexes. Amongst other transformations, the resulting Ni^III and Ni^IV compounds have efficiently accomplished: i) C–C and C–heteroatom bond formation; ii) C–H bond functionalization; and iii) N–N and C–N cyclizative couplings to forge heterocycles.

Correlation between the C-C Cross-Coupling Activity and C-to-Ni Charge Transfer Transition of High-Valent Ni Complexes

High-valent Ni complexes have proven to be good platforms for diverse cross-coupling reactions that are otherwise difficult to be achieved with conventional low-valent catalysts. However, their reductive elimination (RE) activities are still significantly variable by up to 5 orders of magnitude, depending on the supporting ligand and oxidation state of the Ni center. To elucidate frontier molecular orbitals (FMOs) that determine the RE activity of the Ni center, the electronic structures of cycloneophyl (CH₂C(CH₃)₂-o-C₆H₄) Ni^III and Ni^IV complexes have been characterized by utilizing various transition metal-based spectroscopic techniques such as electronic absorption, magnetic circular dichroism, electron paramagnetic resonance, resonance Raman, and X-ray absorption spectroscopies. In combination with density functional theory computations, the spectroscopic analyses have shown that the energies of the C-to-Ni charge-transfer (CT) electronic transitions are strongly correlated to the rates of C-C bond-forming RE reaction. This correlation suggests that the kinetic barrier of the RE reaction is determined by energy cost for internal CT (ICT) from the coordinated carbon moiety to the Ni center, and that FMOs involved in the RE reaction and the C-to-Ni CT electronic transitions are essentially identical. This FMO determination has led us to discover that photoexcitation to the C-to-Ni CT excited states accelerates the C-C cross-coupling reaction by up to 10⁵ times, as the CT electronic transition can substitute for the rate-determining ICT step of the RE reaction at the ground electronic state.

The Myth of d8 Copper(III)

Seventeen Cu complexes with formal oxidation states ranging from CuI to CuIII are investigated through the use of multiedge X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations. Analysis reveals that the metal-ligand bonding in high-valent, formally CuIII species is extremely covalent, resulting in Cu K-edge and L2,3-edge spectra whose features have energies that complicate physical oxidation state assignment. Covalency analysis of the Cu L2,3-edge data reveals that all formally CuIII species have significantly diminished Cu d-character in their lowest unoccupied molecular orbitals (LUMOs). DFT calculations provide further validation of the orbital composition analysis, and excellent agreement is found between the calculated and experimental results. The finding that Cu has limited capacity to be oxidized necessitates localization of electron hole character on the supporting ligands; consequently, the physical d8 description for these formally CuIII species is inaccurate. This study provides an alternative explanation for the competence of formally CuIII species in transformations that are traditionally described as metal-centered, 2-electron CuI/CuIII redox processes.

Nickel-Catalyzed C(2)-H Arylation of Indoles with Aryl Chlorides under Neat Conditions

Nickel-catalyzed regioselective C(2)-H arylation of indoles and pyrroles with aryl chlorides is achieved under neat conditions. This method allows the efficient coupling of diverse aryl chlorides employing a user-friendly and inexpensive Ni(OAc)₂/dppf catalyst system at 80 °C. Numerous functionalities, such as halides, alkyl ether, fluoro-alkyl ether, and thioether, and substituted amines, including heteroarenes like benzothiazolyl, pyrrolyl, indolyl, and carbazolyl, are well tolerated under the reaction conditions. The preliminary mechanistic study highlights a single-electron transfer (SET) pathway for the arylation reaction.