Highly Regio- and Enantioselective Alkoxycarbonylative Amination of Terminal Allenes Catalyzed by a Spiroketal-Based Diphosphine/Pd(II) Complex

Transition Metal-Catalyzed Aminocarbonylation Reactions

Transition-metal-catalyzed aminocarbonylation reactions using low-cost and accessible CO gas as a C1 building block and amine as a nucleophile have been widely used to prepare amides, which are broadly exist in bioactive drugs, natural products, and polymers. This type of reaction has also been applied to construct various biologically active heterocycles. In this review, we highlight aminocarbonylation reactions involving amine and CO under various transition metal catalysis systems (palladium, rhodium, ruthenium, iridium, iron, copper, and cobalt) over the past decade.

Pd-Catalyzed Aerobic C-H Carbonylative Esterification of Imidazo[1,2-a]pyridines with Alcohols as the Carbonyl Source

A simple and practical method has been developed for the carbonylative esterification of imidazo[1,2-a]pyridines via C(sp2)-H bond functionalization using alkyl alcohols under mild reaction conditions. The carbonyl fragment is sourced from radical-mediated C-C cleavage of the alcohols, providing a green, safe, and economic alternative to traditional carbonyl sources like carbon monoxide. Through this strategy, a number of imidazo[1,2-a]pyridine-3-carboxylates were obtained from simple substrates by a single step.

Ambient-pressure alkoxycarbonylation for sustainable synthesis of ester

Alkoxycarbonylation reactions are common in the chemical industry, yet process sustainability is limited by the inefficient utilization of CO. In this study, we address this issue and demonstrate that significant improvements can be achieved by adopting a heterogeneously catalyzed process, using a Ru/NbOx catalyst. The Ru/NbOx catalyst enables the direct synthesis of methyl propionate, a key industrial commodity, with over 98% selectivity from CO, ethylene and methanol, without any ligands or acid/base promoters. Under ambient CO pressure, a high CO utilization efficiency (336 mmolestermolCO-1h-1) is achieved. Mechanistic investigations reveal that CO undergoes a methoxycarbonyl (COOCH3) intermediate pathway, attacking the terminal carbon atom of alkene and yielding linear esters. The origins of prevailing linear regioselectivity in esters are revealed. The infrared spectroscopic feature of the key COOCH3 species is observed at 1750 cm-1 (C=O vibration) both experimentally and computationally. The broad substrate applicability of Ru/NbOx catalyst for ester production is demonstrated. This process offers a sustainable and efficient approach with high CO utilization and atom economy for the synthesis of esters.

Probing the Mechanism of Ni-Catalyzed Asymmetric Reppe Carbonylation of Cyclopropenes with CO and ROH

There is ongoing intense interest in catalysis with the Earth-abundant metal nickel. This DFT study reveals a plausible mechanism for the first Ni-catalyzed asymmetric Reppe carbonylation of cyclopropenes with carbon monoxide and phenols/alcohols. The RO-H bond undergoes a distinct heterolytic cleavage rather than the proposed oxidative addition, transferring a proton to a nickel-bound anionic carbon atom in a stereoselective manner. This and other novel insights gained can have implications for developing new asymmetric Reppe reactions.

Diversification of Pharmaceutical Manufacturing Processes: Taking the Plunge into the Non-PGM Catalyst Pool

Recent global events have led to the cost of platinum group metals (PGMs) reaching unprecedented heights. Many chemical companies are therefore starting to seriously consider and evaluate if and where they can substitute PGMs for non-PGMs in their catalytic processes. This review covers recent highly relevant applications of non-PGM catalysts in the modern pharmaceutical industry. By highlighting these selected successful examples of non-PGM-catalyzed processes from the literature, we hope to emphasize the enormous potential of non-PGM catalysis and inspire further development within this field to enable this technology to progress toward manufacturing processes. We also present some historical contexts and review the perceived advantages and challenges of implementing non-PGM catalysts in the pharmaceutical manufacturing environment.

A practical concept for catalytic carbonylations using carbon dioxide

The rise of CO₂ in atmosphere is considered as the major reason for global warming. Therefore, CO₂ utilization has attracted more and more attention. Among those, using CO₂ as C1-feedstock for the chemical industry provides a solution. Here we show a two-step cascade process to perform catalytic carbonylations of olefins, alkynes, and aryl halides utilizing CO₂ and H₂. For the first step, a novel heterogeneous copper 10Cu@SiO₂-PHM catalyst exhibits high selectivity (≥98%) and decent conversion (27%) in generating CO from reducing CO₂ with H₂. The generated CO is directly utilized without further purification in industrially important carbonylation reactions: hydroformylation, alkoxycarbonylation, and aminocarbonylation. Notably, various aldehydes, (unsaturated) esters and amides are obtained in high yields and chemo-/regio-selectivities at low temperature under ambient pressure. Our approach is of interest for continuous syntheses in drug discovery and organic synthesis to produce building blocks on reasonable scale utilizing CO₂.

Palladium-catalyzed enantioselective carbonylation reactions

Carbonylation, one of the most powerful approaches to the preparation of carbonylated compounds, has received significant attention from researchers active in various fields. Indeed, impressive progress has been made on this subject over the past few decades. Among the various types of carbonylation reactions, asymmetric carbonylation is a straightforward methodology for constructing chiral compounds. Although rhodium-catalyzed enantioselective hydroformylations have been discussed in several elegant reviews, a general review on palladium-catalyzed asymmetric carbonylations is still missing. In this review, we summarize and discuss recent achievements in palladium-catalyzed asymmetric carbonylation reactions. Notably, this review’s contents are categorized by reaction type.

Palladium-Catalyzed Cascade Carbonylation to α,β-Unsaturated Piperidones via Selective Cleavage of Carbon-Carbon Triple Bonds

A direct and selective synthesis of α,β-unsaturated piperidones by a new palladium-catalyzed cascade carbonylation is described. In the presented protocol, easily available propargylic alcohols react with aliphatic amines to provide a broad variety of interesting heterocycles. Key to the success of this transformation is a remarkable catalytic cleavage of the present carbon-carbon triple bond by using a specific catalyst with 2-diphenylphosphinopyridine as ligand and appropriate reaction conditions. Mechanistic studies and control experiments revealed branched unsaturated acid 11 as crucial intermediate.

Palladium-Catalyzed Domino Aminocarbonylation of Alkynols: Direct and Selective Synthesis of Itaconimides

The first direct and selective synthesis of substituted itaconimdes by palladium-catalyzed aminocarbonylation of alkynols is reported. Key to the success of this transformation is the use of a novel catalyst system involving ligand L11 and appropriate reaction conditions. In the protocol here presented, easily available propargylic alcohols react with N-nucleophiles including aryl- and alkylamines as well as aryl hydrazines to provide a broad variety of interesting heterocycles with high catalyst activity and excellent selectivity. The synthetic utility of the protocol is demonstrated in the synthesis of natural product 11 with aminocarbonylation as the key step. Mechanistic studies and control experiments reveal the crucial role of the hydroxyl group in the substrate for the control of selectivity.

Copper/Lewis base cooperatively catalyzed asymmetric allylic alkylation of Morita-Baylis-Hillman carbonates with azomethine ylides

In this paper, an asymmetric allylic alkylation of easily available azomethine ylides with Morita-Baylis-Hillman (MBH) carbonates through a copper (i)/Lewis base cooperative catalysis strategy has been realized. The co-catalyzed asymmetric allylic alkylation provided the corresponding amino acid derivatives in up to 90% yields with up to 99% ee as well as good to excellent regioselectivity.

Rhodium-Catalyzed Regio- and Enantioselective Allylic Amination of Racemic 1,2-Disubstituted Allylic Phosphates

Alkynylphosphines are rarely used as ligands in asymmetric metal catalysis. We synthesized a series of chiral bis(oxazoline)alkynylphosphine ligands and used them in Rh-catalyzed highly regio- and enantioselective allylic amination reactions of 1,2-disubstituted allylic phosphates. Chiral 1,2-disubstituted allylic amines were synthesized in up to 95% yield with >20:1 branched/linear (b/l) ratio and 99% ee from racemic 1,2-disubstituted allylic precursors. The sterically smaller linear alkynyl group on the P atom in the bis(oxazoline)alkynylphosphine ligands was the key to fit the new requirements of the introduction of bulky 2-R' groups.

Efficient Palladium-Catalyzed Carbonylation of 1,3-Dienes: Selective Synthesis of Adipates and Other Aliphatic Diesters

The dicarbonylation of 1,3‐butadiene to adipic acid derivatives offers the potential for a more cost‐efficient and environmentally benign industrial process. However, the complex reaction network of regioisomeric carbonylation and isomerization pathways, make a selective and direct transformation particularly difficult. Here, we report surprising solvent effects on this palladium‐catalysed process in the presence of 1,2‐bis‐di‐tert‐butylphosphin‐oxylene (dtbpx) ligands, which allow adipate diester formation from 1,3‐butadiene, carbon monoxide, and methanol with 97 % selectivity and 100 % atom‐economy under scalable conditions. Under optimal conditions a variety of di‐ and triesters from 1,2‐ and 1,3‐dienes can be obtained in good to excellent yields.

Development of C2-Symmetric Chiral Spirocyclic Phase-Transfer Catalysts: Synthesis and Application to Asymmetric Alkylation of Glycinate Schiff Base

A class of C₂-symmetric chiral spirocyclic phase-transfer catalysts based on tetramethyl-1,1'-spirobiindane scaffold was synthesized from commercially available bisphenol A in 12 steps with 22-25% total yields, which features a more rigid and stable backbone and smaller dihedral angles and can be easily modified. These catalysts show high catalytic performance in the asymmetric alkylation of tert-butyl glycinate Schiff base at only 2 mol % catalyst loading, giving the target products with up to 92% yield and 98% ee.

A Type of Structurally Adaptable Aromatic Spiroketal Based Chiral Diphosphine Ligands in Asymmetric Catalysis

ConspectusWhile spectacular successes have been achieved in homogeneous catalysis with the use of achiral diphosphine ligands featuring a wide natural bite angle, such as XantPhos, chiral diphosphines that can induce a large P-M-P bite angle in their transition metal complexes are conspicuously less explored in asymmetric catalysis, probably due to the challenges in the identification and efficient construction of a suitable chiral backbone. In the past decade, a highly efficient synthesis of chiral aromatic spiroketals and the corresponding diphosphine ligands (SKPs) has been developed in this group.Based on a one-pot catalytic tandem double asymmetric hydrogenation-spiroketalization ring-closure reaction sequence, these SKP ligands featuring an extraordinarily long P···P distance and a flexible backbone have been readily prepared in large scale. Remarkably versatile coordination modes have been found in the complexes of SKP with some catalysis-relevant transition metals, for example, Pd, Cu, Au, and Rh. Whereas SKP enforces an unusually large bite angle in [Pd(SKP)Cl₂] and [Cu(SKP)Cl] complexes (160.1° and 132.8°, respectively), it also allows for a bimetallic Au-Au interaction (3.254 Å) in the complex of [Au₂(SKP)Cl₂] or a square-planar coordination geometry for the [Rh(SKP)(cod)]SbF₆ complex. Such an adaptable nature of SKP ligands for transition metal coordination has profound consequences in homogeneous asymmetric catalysis, as demonstrated by their unique performance in several types of catalytic asymmetric reactions. One of the most exciting examples is SKP/Pd-catalyzed asymmetric allylic amination of Morita-Baylis-Hillman (MBH) adducts, in which SKP/Pd complexes demonstrated excellent control of regio- and enantioselectivities and exhibited exceptionally high efficiency (with a TON up to 4750) in the catalysis. SKP ligands have also found a diversity of successful applications in Cu-, Au-, or Rh-catalyzed asymmetric reactions, further attesting their wide utilities in asymmetric catalysis. Overall, this class of readily accessible SKP ligands featuring a chiral aromatic spiroketal skeleton have demonstrated unique adaptable structures in a variety of transition metal complexes and provided outstanding performance in some difficult asymmetric transformations. The works delineated herein would be expected to stimulate further research efforts on the application of this type of chiral ligand and to provide useful clues in the design of new chiral diphosphine ligands with adaptable bite angles for transition metal catalyzed asymmetric reactions.

Ligand-Controlled Copper-Catalyzed Regiodivergent Carbonylative Synthesis of α-Amino Ketones and α-Boryl Amides from Imines and Alkyl Iodides

Regioselective transformation is among the long-standing challenges in organic synthesis. In this communication, a copper-catalyzed selectivity controlled regiodivergent borocarbonylation of imines with alkyl iodides has been developed. Various α-amino ketones and α-boryl amides were produced in moderate to good yields from the same substrates. The choice of the ligand is key for the regioselectivity control: α-amino ketones were produced selectively in good yields with (p-CF₃ C₆ H₄ )₃ P as the ligand, whereas the corresponding α-boryl amides were obtained with high regioselectivities when using ^Me IMes as the ligand.

Palladium-catalyzed directing group assisted and regioselectivity reversed cyclocarbonylation of arylallenes with 2-iodoanilines

A palladium-catalyzed regioselective cyclocarbonylation of N-(2-pyridyl)sulfonyl (N-SO₂Py)-2-iodoanilines with allenes was developed. The regioselectivity of arylallenes was reversed. Control experiments and DFT calculations were performed to understand the reaction details.

Palladium-catalyzed stereoselective (3 + 2) cycloaddition of vinylethylene carbonates with cyclic N-sulfonyl ketimines

A diastereoselective (3 + 2) cycloaddition of N-sulfonyl ketimines with vinylethylene carbonates (VECs) in the presence of Pd2dba3·CHCl3 and PPh3 has been developed. The reaction of various substituted VECs and diverse cyclic N-sulfonyl ketimines proceeded smoothly under mild conditions, giving highly functionalized oxazolidine frameworks in good to excellent yields with moderate to good diastereoselectivities. With the use of spiroketal-based diphosphine SKP as a chiral ligand, an asymmetric version of the current (3 + 2) cycloaddition was achieved, and chiral products were obtained in >99% ee in most cases.

Bonding Energetics of Palladium Amido/Aryloxide Complexes in DMSO: Implications for Palladium-Mediated Aniline Activation

Thermodynamic knowledge of the metal-ligand (M-L) σ-bond strength is crucial to understanding metal-mediated transformations. Here, we developed a method for determining the Pd-X (X=OR and NHAr) bond heterolysis energies (ΔG_het (Pd-X)) in DMSO taking [(tmeda)PdArX] (tmeda=N,N,N',N'-tetramethylethylenediamine) as the model complexes. The ΔG_het (Pd-X) scales span a range of 2.6-9.0 kcal mol^-1 for ΔG_het (Pd-O) values and of 14.5-19.5 kcal mol^-1 for ΔG_het (Pd-N) values, respectively, implying a facile heterolytic detachment of the Pd ligands. Structure-reactivity analyses of a modeling Pd-mediated X-H bond activation reveal that the M-X bond metathesis is dominated by differences of the X-H and Pd-X bond strengths, the former being more influential. The ΔG_het (Pd-X) and pK_a (X-H) parameters enable regulation of reaction thermodynamics and chemoselectivity and diagnosing the probability of aniline activation with Pd-X complexes.

Synthesis of 1,6-Dihydropyridine-3-carbonitrile Derivatives via Lewis Acid-Catalyzed Annulation of Propargylic Alcohols with (E)-3-Amino-3-phenylacrylonitriles

A novel Lewis acid-catalyzed, highly efficient, practical, and atom-economical protocol for the synthesis of functionalized 1,2-dihydropyridine-3-carbonitrile derivatives in the presence of Bi(OTf)₃ (10 mol %) in tetrahydrofuran (2.0 mL) at 80 °C for 8 h in air is described, starting from readily accessed propargylic alcohols and (E)-3-amino-3-phenylacrylonitriles. This cycloaddition protocol, which is scalable and proceeds under mild conditions, is amenable to the gram-scale construction of valuable 1,2-dihydropyridine-3-carbonitriles. Furthermore, the good functional group compatibility and broad scope of this strategy were demonstrated by a broad range of propargylic alcohols and (E)-3-amino-3-phenylacrylonitriles, with yields ranging from 34 to 96%.

Palladium-Catalyzed Enantioselective Heck Carbonylation with a Monodentate Phosphoramidite Ligand: Asymmetric Synthesis of (+)-Physostigmine, (+)-Physovenine, and (+)-Folicanthine

Reported herein is the development of the first enantioselective monodentate ligand assisted Pd-catalyzed domino Heck carbonylation reaction with CO. The highly enantioselective domino Heck carbonylation of N-aryl acrylamides and various nucleophiles, including arylboronic acids, anilines, and alcohols, in the presence of CO was achieved. A novel monodentate phosphoramidite ligand, Xida-Phos, has been developed for this reaction and it displays excellent reactivity and enantioselectivity. The reaction employs readily available starting materials, tolerates a wide range of functional groups, and provides straightforward access to a diverse array of enantioenriched oxindoles having β-carbonyl-substituted all-carbon quaternary stereocenters, thus providing a facile and complementary method for the asymmetric synthesis of bioactive hexahydropyrroloindole and its dimeric alkaloids.

Palladium-Catalyzed Carbonylative Synthesis of α-Branched Enones from Aryl Iodides and Arylallenes

In this communication, an interesting carbonylation protocol for the preparation of α-branched enones has been established. Starting from readily available aryl iodides and allenes, with formic acid as the CO source and reductant, moderate to good yields of the desired enones were isolated. Although it is a carbonylation methodology, the use of a CO source can avoid the manipulation of CO gas directly. Notably, this procedure also presents the first example on carbonylative synthesis of α-branched enones.

Direct synthesis of adipic acid esters via palladium-catalyzed carbonylation of 1,3-dienes

The direct carbonylation of 1,3-butadiene offers the potential for a more cost-efficient and environmentally benign route to industrially important adipic acid derivatives. However, owing to the complex reaction network of regioisomeric carbonylation and isomerization pathways, a selective practical catalyst for this process has thus far proven elusive. Here, we report the design of a pyridyl-substituted bidentate phosphine ligand (HeMaRaphos) that, upon coordination to palladium, catalyzes adipate diester formation from 1,3-butadiene, carbon monoxide, and butanol with 97% selectivity and 100% atom-economy under industrially viable and scalable conditions (turnover number > 60,000). This catalyst system also affords access to a variety of other di- and triesters from 1,2- and 1,3-dienes.

Construction of All-Carbon Chiral Quaternary Centers through CuI -Catalyzed Enantioselective Reductive Hydroxymethylation of 1,1-Disubstituted Allenes with CO2

A catalytic enantioselective construction of all-carbon chiral quaternary centers through reductive hydroxymethylation of 1,1-disubstituted allenes with CO₂ has been developed. In the presence of a copper/Mandyphos catalyst, CO₂ is transformed into an alcohol oxidation level by an asymmetric reductive C-C bond formation with allenes by using hydrosilane (HSi(OMe)₂ Me) as a reductant. The resulting chiral homoallylic alcohols are versatile synthetic intermediates and can be conveniently converted into a variety of useful chiral chemicals.