Ultrafast Reorientational Dynamics of Leucine at the Air–Water Interface

Chemical Feedback in the Self-Assembly and Function of Air-Liquid Interfaces: Insight into the Bottlenecks of CO2 Direct Air Capture

As fossil fuels remain a major source of energy throughout the world, developing efficient negative emission technologies, such as direct air capture (DAC), which remove carbon dioxide (CO₂) from the air, becomes critical for mitigating climate change. Although all DAC processes involve CO₂ transport from air into a sorbent/solvent, through an air-solid or air-liquid interface, the fundamental roles the interfaces play in DAC remain poorly understood. Herein, we study the interfacial behavior of amino acid (AA) solvents used in DAC through a combination of vibrational sum frequency generation spectroscopy and molecular dynamics simulations. This study revealed that the absorption of atmospheric CO₂ has antagonistic effects on subsequent capture events that are driven by changes in bulk pH and specific ion effects that feedback on surface organization and interactions. Among the three AAs (leucine, valine, and phenylalanine) studied, we identify and separate behaviors from CO₂ loading, chemical changes, variations in pH, and specific ion effects that tune structural and chemical degrees of freedom at the air-aqueous interface. The fundamental mechanistic findings described here are anticipated to enable new approaches to DAC based on exploiting interfaces as a tool to address climate change.

Identification of incommensurability in L-Leucine ; are lattice instabilities can be considered as general phenomena in hydrophobic amino acids?

L-Leucine is an essential amino acid which focuses lot of investigations on its phase transition sequence for more than fifty years. Combining Raman spectroscopy and X-ray diffraction experiments provides a...

Direct Evidence for Aligned Binding of Cellulase Enzymes to Cellulose Surfaces

The conversion of biomass into green fuels and chemicals is of great societal interest. Engineers have been designing new cellulase enzymes for the breakdown of otherwise insoluble cellulose materials. A barrier to the rational design of new enzymes has been our lack of a molecular picture of how cellulase binding occurs. A critical factor is the attachment via the enzyme's carbohydrate binding module (CBM). To elucidate the structural and mechanistic details of cellulase adsorption, we have combined experimental data from sum frequency generation spectroscopy with molecular dynamics simulations to probe the equilibrium structure and surface alignment of a 14-residue peptide mimicking the CBM. The data show that binding is driven by hydrogen bonding and that tyrosine side chains within the CBM align the cellulase with the registry of the cellulose surface. Such an alignment is favorable for the translocation and effective cellulose breakdown and is therefore likely an important parameter for the design of novel enzymes.

Measuring the Multiscale Dynamics, Structure, and Function of Biomolecules at Interfaces

The individual and collective structure and properties of biomolecules can change dramatically when they are localized at an interface. However, the small spatial extent of interfacial regions poses challenges to the detailed characterization of multiscale processes that dictate the structure and function of large biological units such as peptides, proteins, or nucleic acids. This Perspective surveys a broad set of tools that provide new opportunities to probe complex, dynamic interfaces across the vast range of temporal regimes that connect molecular-scale events to macroscopic observables. An emphasis is placed on the integration over multiple time scales, the use of complementary techniques, and the incorporation of external stimuli to control interfacial properties with spatial, temporal, and chemical specificity.

Orientation and Conformation of Proteins at the Air-Water Interface Determined from Integrative Molecular Dynamics Simulations and Sum Frequency Generation Spectroscopy

Understanding the assembly of proteins at the air-water interface (AWI) informs the formation of protein films, emulsion properties, and protein aggregation. Determination of protein conformation and orientation at an interface is difficult to resolve with a single experimental or simulation technique alone. To date, the interfacial structure of even one of the most widely studied proteins, lysozyme, at the AWI remains unresolved. In this study, molecular dynamics (MD) simulations are used to determine if the protein adopts a side-on, head-on, or axial orientation at the AWI with two different forcefields, GROMOS-53a6 + SPC/E and a99SB-disp + TIP4P-D. Vibrational sum frequency generation (SFG) spectroscopy experiments and spectral SFG calculations validate consistency between the structure determined from MD and experiments. Overall, we show with strong agreement that lysozyme adopts an axial conformation at pH 7. Further, we provide molecular-level insight as to how pH influences the binding domains of lysozyme resulting in side-on adsorption near the isoelectric point of the lysozyme.

Molecular reactions at aqueous interfaces

This Review aims to critically analyse the emerging field of chemical reactivity at aqueous interfaces. The subject has evolved rapidly since the discovery of the so-called 'on-water catalysis', alluding to the dramatic acceleration of reactions at the surface of water or at its interface with hydrophobic media. We review critical experimental studies in the fields of atmospheric and synthetic organic chemistry, as well as related research exploring the origins of life, to showcase the importance of this phenomenon. The physico-chemical aspects of these processes, such as the structure, dynamics and thermodynamics of adsorption and solvation processes at aqueous interfaces, are also discussed. We also present the basic theories intended to explain interface catalysis, followed by the results of advanced ab initio molecular-dynamics simulations. Although some topics addressed here have already been the focus of previous reviews, we aim at highlighting their interconnection across diverse disciplines, providing a common perspective that would help us to identify the most fundamental issues still incompletely understood in this fast-moving field.

Molecular Structure and Modeling of Water-Air and Ice-Air Interfaces Monitored by Sum-Frequency Generation

From a glass of water to glaciers in Antarctica, water-air and ice-air interfaces are abundant on Earth. Molecular-level structure and dynamics at these interfaces are key for understanding many chemical/physical/atmospheric processes including the slipperiness of ice surfaces, the surface tension of water, and evaporation/sublimation of water. Sum-frequency generation (SFG) spectroscopy is a powerful tool to probe the molecular-level structure of these interfaces because SFG can specifically probe the topmost interfacial water molecules separately from the bulk and is sensitive to molecular conformation. Nevertheless, experimental SFG has several limitations. For example, SFG cannot provide information on the depth of the interface and how the orientation of the molecules varies with distance from the surface. By combining the SFG spectroscopy with simulation techniques, one can directly compare the experimental data with the simulated SFG spectra, allowing us to unveil the molecular-level structure of water-air and ice-air interfaces. Here, we present an overview of the different simulation protocols available for SFG spectra calculations. We systematically compare the SFG spectra computed with different approaches, revealing the advantages and disadvantages of the different methods. Furthermore, we account for the findings through combined SFG experiments and simulations and provide future challenges for SFG experiments and simulations at different aqueous interfaces.

Otoferlin C2F Domain-Induced Changes in Membrane Structure Observed by Sum Frequency Generation

Proteins that contain C2 domains are involved in a variety of biological processes, including encoding of sound, cell signaling, and cell membrane repair. Of particular importance is the interface activity of the C-terminal C2F domain of otoferlin due to the pathological mutations known to significantly disrupt the protein's lipid membrane interface binding activity, resulting in hearing loss. Therefore, there is a critical need to define the geometry and positions of functionally important sites and structures at the otoferlin-lipid membrane interface. Here, we describe the first in situ probe of the protein orientation of otoferlin's C2F domain interacting with a cell membrane surface. To identify this protein's orientation at the lipid interface, we applied sum frequency generation (SFG) vibrational spectroscopy and coupled it with simulated SFG spectra to observe and quantify the otoferlin C2F domain interacting with model lipid membranes. A model cell membrane was built with equal amounts of phosphatidylserine and phosphatidylcholine. SFG measurements of the lipids that make up the model membrane indicate a 62% increase in amplitude from the SFG signal near 2075 cm^-1 upon protein interaction, suggesting domain-induced changes in the orientation of the lipids and possible membrane curvature. This increase is related to lipid ordering caused by the docking interaction of the otoferlin C2F domain. SFG spectra taken from the amide-I region contain features near 1630 and 1670 cm^-1 related to the C2F domains beta-sandwich secondary structure, thus indicating that the domain binds in a specific orientation. By mapping the simulated SFG spectra to the experimentally collected SFG spectra, we found the C2F domain of otoferlin orients 22° normal to the lipid surface. This information allows us to map what portion of the domain directly interacts with the lipid membrane.

Chiral Inversion of Amino Acids in Antiparallel β-Sheets at Interfaces Probed by Vibrational Sum Frequency Generation Spectroscopy

A parallel study of protein variants with all (l-), all (d-), or mixed (l-)/(d-) amino acids can be used to assess how backbone architecture versus side chain identity determines protein structure. Here, we investigate the secondary structure and side chain orientation dynamics of the antiparallel β-sheet peptide LK7β (Ac-Leu-Lys-Leu-Lys-Leu-Lys-Leu-NH2) composed of all (l-), all (d-), or alternating (l-Leu)/(d-Lys) amino acids. Using interface-selective vibrational sum frequency generation spectroscopy (VSFG), we observe that the alternating (l-)/(d-) peptide lacks a resonant C-H stretching mode compared to the (l-) and (d-) variants and does not form antiparallel β-sheets. We rationalize our observations on the basis of density functional theory calculations and molecular dynamics (MD) simulations of LK7β at the air-water interface. Irrespective of the handedness of the amino acids, leucine side chains prefer to orient toward the hydrophobic air phase while lysine side chains prefer the hydrophilic water phase. These preferences dictate the backbone configuration of LK7β and thereby the folding of the peptide. Our MD simulations show that the preferred side chain orientations can force the backbone of a single strand of (l-) LK7β at the air-water interface to adopt β-sheet Ramachandran angles. However, denaturation of the β-sheets at pH = 2 results in a negligible chiral VSFG amide I response. The combined computational and experimental results lend critical support to the theory that a chiral VSFG response requires macroscopic chirality, such as in β-sheets. Our results can guide expectations about the VSFG optical responses of proteins and should improve understanding of how amino acid chirality modulates the structure and function of natural and de novo proteins at biological interfaces.

Molecular hydrophobicity at a macroscopically hydrophilic surface

Interfaces between water and silicates are ubiquitous and relevant for, among others, geochemistry, atmospheric chemistry, and chromatography. The molecular-level details of water organization at silica surfaces are important for a fundamental understanding of this interface. While silica is hydrophilic, weakly hydrogen-bonded OH groups have been identified at the surface of silica, characterized by a high O-H stretch vibrational frequency. Here, through a combination of experimental and theoretical surface-selective vibrational spectroscopy, we demonstrate that these OH groups originate from very weakly hydrogen-bonded water molecules at the nominally hydrophilic silica interface. The properties of these OH groups are very similar to those typically observed at hydrophobic surfaces. Molecular dynamics simulations illustrate that these weakly hydrogen-bonded water OH groups are pointing with their hydrogen atom toward local hydrophobic sites consisting of oxygen bridges of the silica. An increased density of these molecular hydrophobic sites, evident from an increase in weakly hydrogen-bonded water OH groups, correlates with an increased macroscopic contact angle.

Two dimensional crowding effects on protein folding at interfaces observed by chiral vibrational sum frequency generation spectroscopy

The crowding effect is prevalent in cellular environments due to high concentrations of biomacromolecules. It can alter the structures and dynamics of proteins and thus impact protein functions. The crowding effect is important not only in 3-dimensional cytoplasm but also for a 2-dimensional (2D) cell surface due to the presence of membrane proteins and glycosylation of membrane proteins and phospholipids. These proteins and phospholipids - with limited translational degrees of freedom along the surface normal - are confined in 2D space. Although the crowding effect at interfaces has been studied by adding crowding agents to bulk solution, the 2D crowding effect remains largely unexplored. This is mostly due to challenges in controlling 2D crowding and synergistic use of physical methods for in situ protein characterization. To address these challenges, we applied chiral vibrational sum frequency generation (SFG) spectroscopy to probe the sp1 zinc finger (ZnF), a 31-amino acid protein, folding into a β-hairpin/α-helix (ββα) motif upon binding to Zn2+. We anchored ZnF at the air/water interface via covalent linkage of ZnF to palmitic acid and controlled 2D crowding by introducing neutral lipid as a spacer. We obtained chiral amide I SFG spectra upon addition of Zn2+ and/or spacer lipid. The chiral SFG spectra show that interfacial crowding in the absence of spacer lipid hinders ZnF from folding into the ββα structure even in the presence of Zn2+. The results establish a paradigm for future quantitative, systematic studies of interfacial crowding effects.

Molecular Coupling between Organic Molecules and Metal

Molecular couplings at interfaces play important roles in determining the performance of nanophotonics and molecular electronics. In this Letter, using femtosecond sum frequency generation to trace free-induction decay of vibrationally excited aromatic thiol molecules immobilized on metal with and without the bridged methylene group(s), metal surface free electron-coupled and uncoupled phenyl C-H stretching vibrational modes were identified, with dephasing times of ∼0.28 and ∼0.60 ps, respectively. For thiols on Au with the bridged methylene group(s) (benzyl mercaptan and phenylethanethiol), both the coupled and uncoupled modes were observed; for thiol on Au without the bridged methylene group (thiophenol), only the coupled mode was observed. This indicates that the bridged methylene group(s) serving as a spacer can be used to adjust the molecular coupling between the phenyl vibration and surface free electrons. The experimental approach can be used to tune molecular couplings in advanced nanophotonics and molecular electronics.

Engineering Proteins at Interfaces: From Complementary Characterization to Material Surfaces with Designed Functions

Once materials come into contact with a biological fluid containing proteins, proteins are generally—whether desired or not—attracted by the material's surface and adsorb onto it. The aim of this Review is to give an overview of the most commonly used characterization methods employed to gain a better understanding of the adsorption processes on either planar or curved surfaces. We continue to illustrate the benefit of combining different methods to different surface geometries of the material. The thus obtained insight ideally paves the way for engineering functional materials that interact with proteins in a predetermined manner.

In situ examination of a charged amino acid-induced structural change in lipid bilayers by sum frequency generation vibrational spectroscopy

The interactions between amino acids (AAs) and membranes represent various short-range and long-range interactions for biological phenomena; however, they are still poorly understood. In this study, we used cationic lysine and arginine as AA models, and systematically investigated the interactions between charged AAs and lipid bilayers using sum frequency generation vibrational spectroscopy (SFG-VS) in situ and in real time. The AA-induced dynamic structural changes of the lipid bilayer were experimentally monitored using the spectral features of CD₂, CD₃, the lipid head phosphate, and carbonyl groups in real time. Time-dependent SFG changes in the structure of the lipid bilayer provide direct evidence for the different interactions of lysine and arginine with the membrane. It was found that the discrepancy between lysine and arginine in binding with the lipid bilayer is due to the nature of the terminal functional groups. Arginine exhibits a more drastic impact on the membrane than lysine. SFG responses of the acyl chains, phosphate groups, and carbonyl groups provide evidence that the interaction between AAs and the membrane most likely follows an electrostatics and hydrogen bond-induced defect model. This work presents an exemplary method for comprehensive investigations of interactions between membranes and other functionally significant substances.

Two-Dimensional Linear Dichroism Spectroscopy for Identifying Protein Orientation and Secondary Structure Composition

Quantitative measurements of protein orientation and secondary structure composition are of great importance for protein biotechnology applications and disease treatments, and yet, they are technically challenging for a spectroscopic study. On the basis of quantum mechanics/molecular mechanics simulations, we demonstrate that two-dimensional (2D) linear dichroism spectroscopy is capable of probing the direction of α-helix motifs in proteins. Compared to the conventional linear dichroism (LD) spectra, 2D spectra double the measurable range of orientation of secondary structures. In addition, by calculating the ratio of transverse ππ* signals to longitudinal ππ* signals in 2D spectra, we can achieve quantitative measurement of the fraction of α-helix content in a protein.

Trimethylamine-N-oxide: its hydration structure, surface activity, and biological function, viewed by vibrational spectroscopy and molecular dynamics simulations

Vibrational spectroscopy and molecular simulations revealed the hydrophilicity and hydrophobicity of TMAO in aqueous solution.

LK peptide side chain dynamics at interfaces are independent of secondary structure

Real-time observation of the ultrafast motions of leucine side chains within model peptides at the water–air interface with representative folds – α-helix, 3₁₀-helix, β-strand – show that interfacial dynamics are mostly determined by surface interactions.