Conjugated Polymers with Repeated Sequences of Group 16 Heterocycles Synthesized through Catalyst-Transfer Polycondensation

Influence of Selenium on the Optoelectronic Properties of a Series of Structurally Simple p-type Polymers for Organic Thin-Film Transistors

Tremendous efforts have been dedicated to improving the performance of organic thin-film transistors (OTFTs) through careful polymer design. Sulfur-containing polymers have been studied in-depth; however, their selenium-containing analogs remain rarer. Herein, a series of polymers of low synthetic complexity with systematically increasing selenium content are presented. Three novel polymers FO6-Se, FO6-BS-T, and FO6-BS-Se are synthesized using a facile two-step protocol, combining combinations of selenophene, thiophene, benzothiadiazole (BT), and benzoselenadiazole (BS) units. The optical, electrochemical, and morphological properties of these polymers are comprehensively analyzed, revealing interesting structure-property relationships. Results show a significant bathochromic shift in absorption and emission spectra upon increasing Se content. Charge transport properties are evaluated in OTFTs, with FO6-BS-T exhibiting the highest hole mobility of 0.038 cm2V-1s-1 when annealed at 100 °C. Grazing-incidence wide-angle X-ray scattering (GIWAXS) studies reveal reduced crystallinity upon BS incorporation and density functional theory (DFT) calculations indicate increased backbone twisting upon BS inclusion compared to BT. This work demonstrates how systematic selenium incorporation alters polymer properties, particularly frontier molecular levels, and morphology, contributing to the understanding of selenium-containing scalable polymers for potential application in organic thin-film transistors.

Regioregular Alternating Polychalcogenophenes-Block-Poly(3-hexylthiophene): Synthesis, Structural Characterizations, Molecular Properties, and Transistors

Sequence-controlled polychalcogenophenes have attracted considerable attention in polymer science, particularly in terms of their synthesis, structure, and functionality. In this work, we designed a new series of alternating block conjugated copolymers, denoted as poly(alt-AB)b(3HT), where one block consists of an alternating copolymer and the other is poly(3-hexylthiophene) (P3HT). To construct three sequence-controlled polychalcogenophenes, we utilized 3-hexylthiophene (S), 3-hexylselenophene (Se), and 3-hexyltellurophene (Te) as A and B units, yielding P(SSe)b(3HT), P(STe)b(3HT), and P(SeTe)b(3HT), respectively. These polymers were synthesized via nickel-catalyzed Kumada polymerization by sequentially introducing two different Grignard monomers. Through catalyst-transfer polycondensation (CTP), we achieved precise control over molecular weight, dispersity, block length, and main chain sequence. The polymer structures with high side chain regioregularity in both blocks were definitively confirmed using ¹H and ¹3C NMR analyses. Grazing-incidence wide-angle X-ray scattering (GIWAXS) revealed that all polymers predominantly adopt an edge-on orientation in the solid state. In organic field-effect transistor (OFET) measurements, P(SSe)b(3HT) exhibited the highest hole mobility of 4.4 × 10⁻2 cm2 V⁻¹ s⁻¹, attributed to its highly ordered molecular packing in thin films. Notably, P(STe)b(3HT) achieved a hole mobility of 2.9 × 10⁻2 cm2 V⁻¹ s⁻¹, among the highest reported for tellurophene-containing polychalcogenophenes.

Characteristic System Time Scales Can Influence the Collective Sequence Development of Nematically Ordered Copolymers

The sequence of copolymers is of significant importance to their material properties, yet controlling the copolymer sequence remains a challenge. Previously, we have shown that polymer chains with sufficient stiffness and intermolecular attractions can undergo an emergent, polymerization-driven nematic alignment of nascent oligomers during a step-growth polymerization process. Both the extent of alignment and the point in the reaction at which it occurs impact the kinetics and the sequence development of the growing polymer. Of particular interest is the emergence of a characteristic block length in the ensemble of sequences, resulting in unusually peaked block length distributions. Here we explore the emergence of this characteristic block length over time and investigate how changes in activation energy, solution viscosity, and monomer density influence the sequence and block length distributions of stiff copolymers undergoing step-growth polymerization. We find that emergent aggregation and nematic ordering restrict the availability of longer chains to form bonds, thereby altering the propensity of chains to react in a length dependent fashion, which changes as the reaction progresses, and promoting the formation of chains and blocks of a characteristic length. Further, we demonstrate that the characteristic length scale which emerges is sensitive to the relative time scales of reaction kinetics and reactant diffusion, shifting in response to changes in the activation energy of the reaction and the viscosity of the solvent. Our observations suggest the potential for biasing characteristic lengths of sequence repeats in stiff and semiflexible copolymer systems by targeting specific nonbonded interactions and reaction kinetics through the informed adjustment of reaction conditions and the selection or chemical modification of monomer species.

Sequence-controlled alternating block polychalcogenophenes: synthesis, structural characterization, molecular properties, and transistors for bromine detection

Sequence-controlled polychalcogenophenes have attracted much interest in terms of synthesis, structure and function in polymer science. For the first time, we developed a new class of alternating block conjugated copolymers denoted as poly(alt-AB)x-b-(alt-AC)y where both blocks are constituted by an alternating copolymer. 3-Hexylthiophene (S), 3-hexylselenophene (Se) and 3-hexyltellurophene (Te) are used as A, B and C units to assemble three sequence-controlled polychalcogenophenes P(SSe)b(STe), P(SSe)b(SeTe) and P(STe)b(SeTe) which are prepared by adding two different Grignard monomers in sequence to carry out Ni(dppp)Cl2-catalyzed Kumada polymerization. The molecular weight, dispersity, and length of each block (x = y) and main-chain sequence can be synthetically controlled via the catalyst transfer polycondensation mechanism. The polymer structures, i.e. alternating block main chain with high side-chain regioregularity, are unambiguously confirmed by 1H-NMR and 13C-NMR. The optical and electrochemical properties of the polymers can be systematically fine-tuned by the composition and ratio of the chalcogenophenes. From GIWAXS measurements, all the polymers exhibited predominantly edge-on orientations, indicating that the packing behaviors of the alternating block polychalcogenophenes with high regioregularity are inherited from the highly crystalline P3HT. P(SSe)b(STe) exhibited a hole OFET mobility of 1.4 × 10-2 cm2 V-1 s-1, which represents one of the highest values among the tellurophene-containing polychalcogenophenes. The tellurophene units in the polymers can undergo Br2 addition to form the oxidized TeBr2 species which results in dramatically red-shifted absorption due to the alternating arrangement to induce strong charge transfer character. The OFET devices using the tellurophene-containing polychalcogenophenes can be applied for Br2 detection, showing high sensitivity, selectivity and reversibility.

Synthesis and Characterizations of Polythiophene Networks with Nonplanar BN Lewis Pair Building Blocks

Doping the boron (B) element endowed organic π-conjugated polymers (OCPs) with intriguing optoelectronic properties. Herein, we introduce a new series of thienylborane-pyridine (BN) Lewis pairs via the facile reactions between thienylborane and various pyridine derivatives. Particularly, we developed a "one-pot" synthetic protocol to access BN2 with an unstable 4-bromopyridine moiety. Polycondensations between the BN Lewis pairs and distannylated thiophene afforded a new series of BN-cross-linked polythiophenes (BN-PTs). Experiments revealed that BN-PTs exhibited highly uniform chemical structures, particularly the uniform chemical environment of B-centers. BN-PTs showed good stability in the solid state. PBN2 even maintained the uniform B-center under high temperature or moisture conditions. The studies further suggested that the presence of topological BN structures endowed the polymers with strong intramolecular charge separation character. As a proof of concept, a representative BN-PT was tested as the catalyst for photocatalytic hydrogen evolution.

Living Suzuki-Miyaura Catalyst-Transfer Polymerization for Precision Synthesis of Length-Controlled Armchair Graphene Nanoribbons and Their Block Copolymers

The bottom-up synthesis of graphene nanoribbons (GNRs) offers a promising approach for designing atomically precise GNRs with tuneable photophysical properties, but controlling their length remains a challenge. Herein, we report an efficient synthetic protocol for producing length-controlled armchair GNRs (AGNRs) through living Suzuki-Miyaura catalyst-transfer polymerization (SCTP) using RuPhos-Pd catalyst and mild graphitization methods. Initially, SCTP of a dialkynylphenylene monomer was optimized by modifying boronates and halide moieties on the monomers, affording poly(2,5-dialkynyl-p-phenylene) (PDAPP) with controlled molecular weight (M_n up to 29.8k) and narrow dispersity (Đ = 1.14-1.39) in excellent yield (>85%). Subsequently, we successfully obtained N = 5 AGNRs by employing a mild alkyne benzannulation reaction on the PDAPP precursor and confirmed their length retention by size-exclusion chromatography. In addition, photophysical characterization revealed that a molar absorptivity was directly proportional to the length of the AGNR, while its highest occupied molecular orbital (HOMO) energy level remained constant within the given AGNR length. Furthermore, we prepared, for the very first time, N = 5 AGNR block copolymers with widely used donor or acceptor-conjugated polymers by taking advantage of the living SCTP. Finally, we achieved the lateral extension of AGNRs from N = 5 to 11 by oxidative cyclodehydrogenation in solution and confirmed their chemical structure and low band gap by various spectroscopic analyses.

Stille type P-C coupling polycondensation towards phosphorus-crosslinked polythiophenes with P-regulated photocatalytic hydrogen evolution

Recently, exploring new type polymerization protocols has been a major driving force in advancing organic polymers into highly functional materials. Herein we report a new polycondensation protocol to implant the phosphorus (P) atom in the main backbone of crosslinked polythiophenes. The polycondensation harnesses a Stille phosphorus-carbon (P-C) coupling reaction between phosphorus halides and aryl stannanes that has not been reported previously. Mechanistic studies uncovered that the P-electrophile makes the reactivity of a catalytic Pd-center highly sensitive towards the chemical structures of aryl stannanes, which is distinct from the typical Stille carbon-carbon coupling reaction. The efficient P-C polycondensation afforded a series of P-crosslinked polythiophenes (PC-PTs). Leveraging on the direct P-crosslinking polymerization, solid-state ³¹P NMR studies revealed highly uniform crosslinking environments. Efficient post-polymerization P-chemistry was also applied to the PC-PTs, which readily yielded the polymers with various P-environments. As a proof of concept, new PC-PTs were applied as the photocatalysts for H₂ evolution under visible light irradiation. PC-PTs with an ionic P(Me)-center exhibit a H₂ evolution rate up to 2050 μmol h^-1 g^-1, which is much higher than those of PC-PTs with a P(O)-center (900 μmol h^-1 g^-1) and P(iii)-center (155 μmol h^-1 g^-1). For the first time, the studies reveal that regulating P-center environments can be an effective strategy for fine tuning the photocatalytic H₂ evolution performance of organic polymers.

A Review on The Medicinal And Industrial Applications of N-Containing Heterocycles

Nitrogen-containing heterocycles constitute an important division of organic chemistry. The structural and functional diversity in nitrogen-containing heterocyclic compounds emanates from the presence and nature of the heteroatom that optimizes the compound for a specific application. Nitrogen heterocycles have been found to mimic various endogenous metabolites and natural products, highlighting their pivotal role in current drug design. Their applications are manifold and are predominantly used as pharmaceuticals, corrosion inhibitors, polymers, agrochemicals, dyes, developers, etc. Additionally, their catalytic behavior has rendered these compounds notable precursors in synthesizing various important organic compounds. The rate at which nitrogen heterocycles are synthesized explains this organic chemistry domain's vitality and usefulness. The present review article focuses on nitrogen-containing heterocycles as a versatile scaffold for current applications of organic chemistry.

Non-Aufbau orbital ordering and spin density modulation in high-spin donor-acceptor conjugated polymers

High-spin ground-state organic materials with unique spin topology can significantly impact molecular magnetism, spintronics, and quantum computing devices. However, strategies to control the spin topology and alignment of the unpaired spins in different molecular orbitals are not well understood. Here, we report modulating spin distribution along the molecular backbone in high-spin ground-state donor-acceptor (D-A) conjugated polymers. Density functional theory calculations indicate that substitution of different heteroatoms (such as C, Si, N, and Se) alters the aromatic character in the thiadiazole unit of the benzobisthiadiazole (BBT) acceptor and modulates the oligomer length to result in high-spin triplet ground-state, orbital and spin topology. The C, Si, and Se atom substituted polymers show a localized spin density at the two opposite ends of the polymers. However, a delocalized spin distribution is observed in the N substituted polymer. We find that the hybridization (sp³vs. sp²) of the substituent atom plays an important role in controlling the electronic structure of these materials. This study shows that atomistic engineering is an efficient technique to tune the spin topologies and electronic configurations in the high-spin ground-state donor-acceptor conjugated polymers, compelling synthetic targets for room-temperature magnetic materials.

Group 16 conjugated polymers based on furan, thiophene, selenophene, and tellurophene

Five-membered aromatic rings containing Group 16 elements (O, S, Se, and Te), also referred as chalcogenophenes, are ubiquitous building blocks for π-conjugated polymers (CPs). Among these, polythiophenes have been established as a model system to study the interplay between molecular structure, solid-state organization, and electronic performance. The judicious substitution of alternative heteroatoms into polythiophenes is a promising strategy for tuning their properties and improving the performance of derived organic electronic devices, thus leading to the recent abundance of CPs containing furan, selenophene, and tellurophene. In this review, we first discuss the current status of Kumada, Negishi, Murahashi, Suzuki-Miyaura, and direct arylation polymerizations, representing the best routes to access well-defined chalcogenophene-containing homopolymers and copolymers. The self-assembly, optical, solid-state, and electronic properties of these polymers and their influence on device performance are then summarized. In addition, we highlight post-polymerization modifications as effective methods to transform polychalcogenophene backbones or side chains in ways that are unobtainable by direct polymerization. Finally, the major challenges and future outlook in this field are presented.

Redox-Active Heteroatom-Functionalized Polyacetylenes

The discovery of metallic conductivity in polyacetylene [-HC=CH-]_n upon doping represents a landmark achievement. However, the insolubility of polyacetylene and a dearth of methods for its chemical modification have limited its widespread use. Here, we employ a ring-opening metathesis polymerization (ROMP) protocol to prepare functionalized polyacetylenes (fPAs) bearing: (1) electron-deficient boryl (-BR₂ ) and phosphoryl (-P(O)R₂ ) side chains; (2) electron-donating amino (-NR₂ ) groups, and (3) ring-fused 1,2,3-triazolium units via strain-promoted Click chemistry. These functional groups render most of the fPAs soluble and can lead to intense light absorption across the visible to near-IR region. Also, the presence of redox-active boryl and amino groups leads to opposing near-IR optical responses upon (electro)chemical reduction or oxidation. Some of the resulting fPAs show greatly enhanced air stability when compared to known polyacetylenes. Lastly, these fPAs can be cross-linked to yield network materials with the full retention of optical properties.

Precision Synthesis of Conjugated Polymers Using the Kumada Methodology

Since the discovery of conductive poly(acetylene), the study of conjugated polymers has remained an active and interdisciplinary frontier between polymer chemistry, polymer physics, computation, and device engineering. One of the ultimate goals of polymer science is to reliably synthesize structures, similar to small molecule synthesis. Kumada catalyst-transfer polymerization (KCTP) is a powerful tool for synthesizing conjugated polymers with predictable molecular weights, narrow dispersities, specific end groups, and complex backbone architectures. However, expanding the monomer scope beyond the well-studied 3-alkylthiophenes to include electron-deficient and complex heterocycles has been difficult. Revisiting the successful applications of KCTP can help us gain new insight into the CTP mechanisms and thus inspire breakthroughs in the controlled polymerization of challenging π-conjugated monomers.In this Account, we highlight our efforts over the past decade to achieve controlled synthesis of homopolymers (p-type and n-type), copolymers (diblock and statistical), and monodisperse high oligomers. We first give a brief introduction of the mechanism and state-of-the-art of KCTP. Since the extent of polymerization control is determined by steric and electronic effects of both the catalyst and monomer, the polymerization can be optimized by modifying monomer and catalyst structures, as well as finding a well-matched monomer-catalyst system. We discuss the effects of side-chain steric hindrance and halogens in the context of heavy atom substituted monomers. By moving the side-chain branch point one carbon atom away from the heterocycle to alleviate steric crowding and stabilize the catalyst resting state, we were able to successfully control the polymerization of new tellurophene monomers. Inspired by innocent role of the sterically encumbered 2-transmetalated 3-alkylthiophene monomer, we introduce the treatment of hygroscopic monomers with a bulky Grignard compound as a water-scavenger for the improved synthesis of water-soluble conjugated polymers. For challenging electron-deficient monomers, we discuss the design of new Ni(II)diimine catalysts with electron-donating character which enhance the stability of the association complex between the catalyst and the growing polymer chain, resulting in the quasi-living synthesis of n-type polymers. Beyond n-type homopolymers, the Ni(II)diimine catalysts are also capable of producing electron-rich and electron-deficient diblock and statistical copolymers. We discuss how density functional theory (DFT) calculations elucidate the role of catalyst steric and electronic effects in controlling the synthesis of π-conjugated polymers. Moreover, we demonstrate the synthesis of monodisperse high oligomers by temperature cycling, which takes full advantage of the unique character of KCTP in that it proceeds through distinct intermediates that are not reactive. The insight we gained thus far leads to the first example of isolated living conjugated polymer chains prepared by a standard KCTP procedure, with general applicability to different monomers and catalytic systems. In summarizing a decade of innovation in KCTP, we hope this Account will inspire future development in the field to overcome key challenges including the controlled synthesis of electron-deficient heterocycles, complex and high-performance systems, and degradable and recyclable materials as well as cutting-edge catalyst design.

Computer Assisted Structure Elucidation (CASE): Current and future perspectives

The first efforts for the development of methods for Computer-Assisted Structure Elucidation (CASE) were published more than 50 years ago. CASE expert systems based on one-dimensional (1D) and two-dimensional (2D) Nuclear Magnetic Resonance (NMR) data have matured considerably by now. The structures of a great number of complex natural products have been elucidated and/or revised using such programs. In this article, we discuss the most likely directions in which CASE will evolve. We act on the premise that a synergistic interaction exists between CASE, new NMR experiments, and methods of computational chemistry, which are continuously being improved. The new developments in NMR experiments (long-range correlation experiments, pure-shift methods, coupling constants measurement and prediction, residual dipolar couplings [RDCs]), and residual chemical shift anisotropies [RCSAs], evolution of density functional theory (DFT), and machine learning algorithms will have an influence on CASE systems and vice versa. This is true also for new techniques for chemical analysis (Atomic Force Microscopy [AFM], "crystalline sponge" X-ray analysis, and micro-Electron Diffraction [micro-ED]), which will be used in combination with expert systems. We foresee that CASE will be utilized widely and become a routine tool for NMR spectroscopists and analysts in academic and industrial laboratories. We believe that the "golden age" of CASE is still in the future.

π-Conjugated Materials Derived From Boron-Chalcogenophene Combination. A Brief Description of Synthetic Routes and Optoelectronic Applications

Functional materials composed of Boron-chalcogenophene conjugates have emerged as promising ensemble featuring commendable optoelectronic properties. This review describes the categories, synthetic routes and optoelectronic applications of a range of boron-chalcogenophene conjugates. Conjugation and linking of different types of tri- and tetra-coordinated boron moieties with chalcogenophenes have remained an important strategy for constructing a range of functional materials. Synthetic protocols have been devised to efficiently prepare such chemically robust conjugates, often exhibiting a myriad of photophysical properties, redox capabilities and also solid-state behaviors. Tin-boron and silicon-boron exchange protocols have been efficiently adapted to access these boron-chalcogenophenes. Few other commonly used methods namely, hydroboration of alkynes as well as electrophilic borylations are also mentioned. The chemical and electronic properties of such boron-chalcogenophene conjugates are directly influenced by the strong Lewis acid character of trivalent boranes which can further alter the intra- and inter- molecular Lewis acid-base interactions. Apart from the synthetic protocols, recent advances in the application of these boron-chalcogenophene conjugates towards analyte sensing, organic electronics, molecular switches and several other aspects will be discussed in this review.

Geared Toward Applications: A Perspective on Functional Sequence-Controlled Polymers

Sequence-controlled polymers are an emerging class of synthetic polymers with a regulated sequence of monomers. In the past decade, tremendous progress has been made in the synthesis of polymers with the sophisticated sequence control approaching the level manifested in biopolymers. In contrast, the exploration of novel functions that can be achieved by controlling synthetic polymer sequences represents an emerging focus in polymer science. This Viewpoint will survey recent advances in the functional applications of sequence-controlled polymers and provide a perspective on the challenges and outlook for pursuing future applications of this fascinating class of macromolecules.

Preparing polythiophene derivative with alternating alkyl and thioalkyl side chains via Kumada coupling for efficient organic solar cells

A polythiophene, namely PTST with alternating alkyl and thioalkyl side chains, is prepared by Kumada catalyst-transfer polycondensation. PTST can hierarchically pre-aggregate in solution, and then form a favorable morphology in organic solar cells.

NMR study of dyadic and triadic splitting in copoly(arylene)phthalides based on diphenyl oxide and diphenyl sulfide

All ¹³ C NMR signals of the poly(arylene) polymers, O-1, S-7, OS-4, OOS-3, OOOS-2, SSO-5, and SSSO-6 (where O is a diphenyleneoxiphthalide unit and S is a diphenylenethiophthalide unit) in dyads and triads were assigned unequivocally with two-dimensional NMR techniques (ge-2D [¹ H-¹ H] COSY, ge-2D [¹ H-¹³ C] HSQC, and ge-2D [¹ H-¹³ C] HMBC), and for each atom, the increments of the shifts are determined. For structurally similar carbon atoms of the phthalide cycle and heteroaromatic fragments of the skeletal chain, additive signal splitting schemes in phthalide centered dyads and in diphenylene oxide and in diphenylene sulfide centered triads are considered, based on taking into account the contributions to their shielding of adjacent and distant substituents. It was shown that the nature of the splitting of the signals of each of the 20 carbon atoms in 3,3-bisphenylphthalide fragments is determined by the type of carbon atom (tertiary or quaternary, even or odd), the type of heteroatoms in adjacent heteroaromatic fragments, their distance from the identified carbon nucleus, and their polyad symmetry. The results obtained in this article will greatly facilitate our further studies and, in particular, will allow us to study the microstructure of statistical copolymers based on the asymmetric OS monomer at the dyad and triad levels.

Electronically Governed ROMP: Expanding Sequence Control for Donor–Acceptor Conjugated Polymers

Controlling the primary sequence of synthetic polymers remains a grand challenge in chemistry. A variety of methods that exert control over monomer sequence have been realized wherein differential reactivity, pre-organization, and stimuli-response have been key factors in programming sequence. Whereas much has been established in nonconjugated systems, π-extended frameworks remain systems wherein subtle structural changes influence bulk properties. The recent introduction of electronically biased ring-opening metathesis polymerization (ROMP) extends the repertoire of feasible approaches to prescribe donor–acceptor sequences in conjugated polymers, by enabling a system to achieve both low dispersity and controlled polymer sequences. Herein, we discuss recent advances in obtaining well-defined (i.e., low dispersity) polymers featuring donor–acceptor sequence control, and present our design of an electronically ambiguous (4-methoxy-1-(2-ethylhexyloxy) and benzothiadiazole-(donor–acceptor-)based [2.2]paracyclophanediene monomer that undergoes electronically dictated ROMP. The resultant donor–acceptor polymers were well-defined (Đ = 1.2, Mn > 20 k) and exhibited lower energy excitation and emission in comparison to ‘sequence-ill-defined’ polymers. Electronically driven ROMP expands on prior synthetic methods to attain sequence control, while providing a promising platform for further interrogation of polymer sequence and resultant properties.

1 Introduction to Sequence Control

2 Sequence Control in Polymers

3 Multistep-Synthesis-Driven Sequence Control

4 Catalyst-Dictated Sequence Control

5 Electronically Governed Sequence Control

6 Conclusions

Synthesis of side-chain regioregular and main-chain alternating poly(bichalcogenophene)s and an ABC-type periodic poly(terchalcogenophene)

Three unsymmetrical diiodobichalcogenophenes SSeI2, STeI2, and SeTeI2 and a diiodoterchalcogenophene SSeTeI2 were prepared. Grignard metathesis of SSeI2, STeI2, SeTeI2, and SSeTeI2 occurred regioselectively at the lighter chalcogenophene site because of its relatively lower electron density and less steric bulk. Nickel-catalyzed Kumada catalyst-transfer polycondensation of these Mg species provided a new class of side-chain regioregular and main-chain AB-type alternating poly(bichalcogenophene)s-PSSe, PSTe, and PSeTe-through a chain-growth mechanism. The ring-walking of the Ni catalyst from the lighter to the heavier chalcogenophene facilitated subsequent oxidative addition, thereby suppressing the possibility of chain-transfer or chain-termination. More significantly, the Ni catalyst could walk over the distance of three rings (ca. 1 nm)-from a thiophene unit via a selenophene unit to a tellurophene unit-to form PSSeTe, the first ABC-type regioregular and periodic poly(terchalcogenophene) comprising three different types of 3-hexylchalcogenophenes.

Recent developments in the synthesis of regioregular thiophene-based conjugated polymers for electronic and optoelectronic applications using nickel and palladium-based catalytic systems

Thiophene-based conjugated polymers are important conjugated polymers due to their exceptional optical and conductive properties, over the past few decades many researchers have designed novel strategies to reach more efficient materials for electronic applications.

Sequence-Controlled Polymers Through Entropy-Driven Ring-Opening Metathesis Polymerization: Theory, Molecular Weight Control, and Monomer Design

The bulk properties of a copolymer are directly affected by monomer sequence, yet efficient, scalable, and controllable syntheses of sequenced copolymers remain a defining challenge in polymer science. We have previously demonstrated, using polymers prepared by a step-growth synthesis, that hydrolytic degradation of poly(lactic- co-glycolic acid)s is dramatically affected by sequence. While much was learned, the step-growth mechanism gave no molecular weight control, unpredictable yields, and meager scalability. Herein, we describe the synthesis of closely related sequenced polyesters prepared by entropy-driven ring-opening metathesis polymerization (ED-ROMP) of strainless macromonomers with imbedded monomer sequences of lactic, glycolic, 6-hydroxy hexanoic, and syringic acids. The incorporation of ethylene glycol and metathesis linkers facilitated synthesis and provided the olefin functionality needed for ED-ROMP. Ring-closing to prepare the cyclic macromonomers was demonstrated using both ring-closing metathesis and macrolactonization reactions. Polymerization produced macromolecules with controlled molecular weights on a multigram scale. To further enhance molecular weight control, the macromonomers were prepared with cis-olefins in the metathesis-active segment. Under these selectivity-enhanced (SEED-ROMP) conditions, first-order kinetics and narrow dispersities were observed and the effect of catalyst initiation rate on the polymerization was investigated. Enhanced living character was further demonstrated through the preparation of block copolymers. Computational analysis suggested that the enhanced polymerization kinetics were due to the cis-macrocyclic olefin being less flexible and having a larger population of metathesis-reactive conformers. Although used for polyesters in this investigation, SEED-ROMP represents a general method for incorporation of sequenced segments into molecular weight-controlled polymers.

Cross-conjugated poly(selenylene vinylene)s

Poly(selenylene vinylene) (PSV) is a close analog to the extensively studied poly(thienylene vinylene) (PTV) polymers, and possesses unique properties originating from the larger, more polarizable Se atoms.

Property impact of common linker segments in sequence-controlled polyesters

Linker segments in sequence controlled polyester backbones significantly affect thermal, mechanical and degradation properties.

Self-Organization and Charge Transport Properties of Selenium and Tellurium Analogues of Polythiophene

A series of conjugated polymers comprising polythiophene, polyselenophene, and polytellurophene with branched 3,7-dimethyloctyl side chains, well-matched molecular weight, dispersity, and regioregularity is synthesized. The ionization potential is found to vary from 5.14 to 5.32 eV, with polytellurophene having the lowest potential. Field-effect transistors based on these materials exhibit distinct hole transport mobility that varies by nearly three orders of magnitude, with polytellurophene having the highest mobility (2.5 × 10^-2 cm² V^-1 s^-1 ). The large difference in mobility demonstrates the significant impact of heteroatom substitution. Although the series of polymers are very similar in structure, their solid-state properties are different. While the thin film microstructure of polythiophene and polyselenophene is identical, polytellurophene reveals globular features in the film topography. Polytellurophenes also appear to be the least crystalline, even though their charge transport properties are superior to other samples. The torsional barrier and degree of planarity between repeat units increase as one moves down group-16 elements. These studies show how a single atom in a polymer chain can have a substantial influence on the bulk properties of a material, and that heavy group-16 atoms have a positive influence on charge transport properties when all other variables are kept unchanged.

From Monodisperse Thienyl- and Furylborane Oligomers to Polymers: Modulating the Optical Properties through the Hetarene Ratio

The application of our newly developed B-C coupling method by catalytic Si/B exchange is demonstrated for the synthesis of a series of triarylboranes (1), monodisperse thienyl- and furylborane dimers (2) and trimers (9), extended oligomers (3) and polymers (3'), as well as mixed (oligo)thienyl-/furylboranes. The structures of 1 aa^Tip , 1 bb^Tip , and 2 bbb^Mes* , determined by X-ray crystallography, reveal largely coplanar hetarene rings and BR₃ environments, which are most pronounced in the furylborane species. Photophysical investigations, supported by TD-DFT calculations, revealed pronounced π-electron delocalization over the hetarene backbones including the boron centers. With an extended series of derivatives of varying chain lengths available, we were able to determine the effective conjugation lengths (ECL) of poly(thienylborane)s and poly(furylborane)s, which have been reached with the highest-molecular-weight derivatives of our study. Through variation of the furan-to-thiophene ratio, the photophysical properties of these materials are effectively modulated. Significantly, higher furan contents lead to considerably increased fluorescence intensities. Compounds 1 aa^Tip , 1 bb^Tip , and 3 a^Tip showed the ability to bind fluoride anions. The binding process is signaled by a distinct change in their optical absorption characteristics, thus rendering these materials attractive targets for sensory applications.

Difuryl(supermesityl)borane: a versatile building block for extended π-conjugated materials

B-Doping of oligo(hetarene)s led to very robust, air-stable π-conjugated materials that are strong electron-acceptors and blue light emitters.

Controlled synthesis of ortho, para-alternating linked polyarenes via catalyst-transfer Suzuki coupling polymerization

A novel class of ortho, para-alternating linked polyarenes is synthesized via catalyst-transfer Suzuki coupling polymerization with Pd₂(dba)₃/t-Bu₃P/p-BrC₆H₄COPh as initiator.

Balancing steric and electronic effects of bidentate, mixed P,N ligands to control Kumada catalyst transfer polycondensation of a sterically hindered thiophene

Screening various P,N ligands to control KCTP of a sterically hindered thiophene reveals an oxazoline-based ligand most effective.

Synergistic Effects of Selenophene and Extended Ladder-Type Donor Units for Efficient Polymer Solar Cells

Two pairs of polymer donor materials based on indacenodithiophene (IDT) and indacenodithieno[3,2-b]thiophene (IDTT) as the donor units are synthesized. Thiophene or selenophene is introduced as the π-bridge units and electron-deficient fluorine-substituted quinoxaline is used as acceptor unit. Selenophene-containing polymers PIDT-DFQ-Se and PIDTT-DFQ-Se show redshifted absorption and narrower bandgaps. Combined with IDTT donor unit, PIDTT-DFQ-Se shows the highest absorption coefficient. Both the IDTT unit and selenophene unit have positive effects on the hole mobilities, making PIDTT-DFQ-Se the highest one. The best power conversion efficiency of 7.4% is obtained from devices based on PIDTT-DFQ-Se:[6,6]-phenyl C₇₁ butyric acid methyl ester (PC₇₁ BM) with a J_sc of 12.6 mA cm^-2 , a V_oc of 0.89 V, and a fill factor (FF) of 0.66.