Cyclobutene vs 1,3-Diene Formation in the Gold-Catalyzed Reaction of Alkynes with Alkenes: The Complete Mechanistic Picture

Gold(I) Catalysis in Alkyne-Alkene Reactions: A Systematic Exploration through Molecular Electrostatic Potential Analysis

Gold catalysis enables selective chemical transformations with catalytic activity tunable through ligand selection. This study uses the density functional theory (DFT) to explore the impact of phosphine ligands (PR3) on gold(I)-catalyzed alkyne-alkene cyclobutene formation. We analyze the following key steps: (i) PR3-Au+ complexation, (ii) alkyne binding, (iii) alkene binding, (iv) C-C coupling transition state, (v) cyclobutene formation transition state, and (vi) cyclobutene dissociation. Molecular electrostatic potential (MESP) analysis provided a deeper understanding of electronic effects and revealed a strong correlation between the change in MESP at the gold nucleus (ΔNVAu+) upon complex formation with various ligands and the corresponding complexation energy, as well as between the change in MESP at the alkyne carbon (ΔVC) and the C-C coupling step activation barrier. This establishes MESP as a powerful tool for understanding ligand influence on catalysis. Our findings suggest that electron-donating phosphine ligands, combined with electron-withdrawing alkyne substituents, enhance catalyst turnover, promote cyclobutene product dissociation from the gold(I) complex, and facilitate catalyst regeneration. Solvent effects also play a crucial role. Bulky XPhos, JohnPhos, and CyJohnPhos ligands enhance gold(I) catalysis via steric protection, electron donation, and catalyst regeneration efficiency. In conclusion, this study provides insights into ligand effects in gold(I)-catalyzed cyclobutene formation, guiding future catalyst design.

π-Bonding of Group 11 Metals to a Tantalum Alkylidyne Alkyl Complex Promotes Unusual Tautomerism to Bis-alkylidene and CO2 to Ketenyl Transformation

A salt metathesis synthetic strategy is used to access rare tantalum/coinage metal (Cu, Ag, Au) heterobimetallic complexes. Specifically, complex [Li(THF)2][Ta(CtBu)(CH2tBu)3], 1, reacts with (IPr)MCl (M = Cu, Ag, Au, IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) to afford the alkylidyne-bridged species [Ta(CH2tBu)3(μ-CtBu)M(IPr)] 2-M. Interestingly, π-bonding of group 11 metals to the Ta─C moiety promotes a rare alkylidyne alkyl to bis-alkylidene tautomerism, in which compounds 2-M are in equilibrium with [Ta(CHtBu)(CH2tBu)2(μ-CHtBu)M(IPr)] 3-M. This equilibrium was studied in detail using NMR spectroscopy and computational studies. This reveals that the equilibrium position is strongly dependent on the nature of the coinage metal going down the group 11 triad, thus offering a new valuable avenue for controlling this phenomenon. Furthermore, we show that these uncommon bimetallic couples could open attractive opportunities for synergistic reactivity. We notably report an uncommon deoxygenative carbyne transfer to CO2 resulting in rare examples of coinage metal ketenyl species, (tBuCCO)M(IPr), 4-M (M = Cu, Ag, Au). In the case of the Ta/Li analogue 1, the bis(alkylidene) tautomer is not detected, and the reaction with CO2 does not cleanly yield ketenyl species, which highlights the pivotal role played by the coinage metal partner in controlling these unconventional reactions.

Acid-promoted intra- and intermolecular [2+2] cycloaddition of indoles to aryl alkynes to access cyclobutene-fused indolines

Herein, we have reported the first example of both intra- and intermolecular [2+2] cycloaddition of the electron-rich indoles and unactivated aryl alkynes promoted by the combination of Fe(NO₃)₃ and HNO₃, which highlights efficient and selective access to several different types of functionalized cyclobutene-fused indolines from readily available starting materials with cheap catalysts and simple operations.

Azolium Aurates as Pre-Catalysts for the Oxidative Coupling of Terminal Alkynes under Mild Conditions

A simple and efficient method for the oxidative coupling of terminal alkynes is reported for the first time, making use of imidazol(in)ium aurates as pre-catalysts. This approach displays high functional group tolerance and leads to a broad range of 1,3-diyne compounds in moderate to excellent yields using low catalyst loading and is performed in air under mild and sustainable conditions.

Synthesis of Cyclobutanones by Gold(I)-Catalyzed [2 + 2] Cycloaddition of Ynol Ethers with Alkenes

A broad scope synthesis of cyclobutanones by gold(I)-catalyzed [2 + 2] cycloaddition of ynol ethers with alkenes has been developed. We also found that internal aryl ynol ethers can undergo (4 + 2) cycloaddition reaction with alkenes leading to the corresponding chromanes.

Gold(I)-Catalyzed Intermolecular Formal [4+2] Cycloaddition of O-Aryl Ynol Ethers and Enol Ethers: Synthesis of Chromene Derivatives

Gold(I)-catalyzed formal [4+2] cycloaddition of O-aryl ynol ethers 1 and enol ethers 2 is described. This intermolecular reaction between two electron-rich unsaturated systems takes place, under mild conditions, in the presence of 5 mol% [IPrAu(CH3 CN)]SbF6 as catalyst giving chromene derivatives with good yields. The cycloaddition is completely regio- and stereoselective, as well as versatile for both reactives. Silyl enol ethers can also react in the same way and under the same reaction conditions with quantitative yields. A plausible mechanism through a selective addition of the enol ether to the alkyne gold activated complex followed by an intramolecular aromatic electrophilic substitution is proposed. Several experimental results support the presence of a cationic oxonium intermediate prior to the aromatic substitution. The reaction represents a new entry to the chromene core.

New-Generation Ligand Design for the Gold-Catalyzed Asymmetric Activation of Alkynes

Gold(I) catalysts are ideal for the activation of alkynes under very mild conditions. However, unlike allenes or alkenes, the triple bond of alkynes cannot be prochiral. In addition, the linear coordination displayed by gold(I) complexes places the chiral ligand far away from the substrate resulting in an inefficient transfer of chiral information. This poses a significant challenge for the achievement of high enantiocontrol in gold(I)-catalyzed reactions of alkynes. Although considerable progress on enantioselective gold(I)-catalyzed transformations has recently been achieved, the asymmetric activation of non-prochiral alkyne-containing small molecules still represents a great challenge. Herein we summarize recent advances in intra- and intermolecular enantioselective gold(I)-catalyzed reactions involving alkynes, discussing new chiral ligand designs that lie at the basis of these developments. We also focus on the mode of action of these catalysts, their possible limitations towards a next-generation of more efficient ligand designs. Finally, square planar chiral gold(III) complexes, which offer an alternative to chiral gold(I) complexes, are also discussed.

Small rings in the bigger picture: ring expansion of three- and four-membered rings to access larger all-carbon cyclic systems

The release of the inherent ring strain of cyclobutane and cyclopropane derivatives allows a rapid build-up of molecular complexity. This review highlights the state-of-the-art of the ring expansions of three- and four-membered cycles and is organised by types of reactions with emphasis on the reaction mechanisms. Selected examples are discussed to illustrate the synthetic potential of this elegant synthetic tool.

Synthetic Strategy for Construction of Highly Congested Tetracyclic Core (6-5-7-4) of Harziane Diterpenoids

The structurally intriguing tetracyclic core of complex harziane diterpenoid was constructed in 14 steps from commercially available 3-ethoxycyclohex-2-en-1-one. The key steps were a Mn/Cu-mediated oxidative 1,3-dicarbonyl radical cascade cyclization reaction, which diastereoselectively formed the core of dimethylbicyclo[3.2.1]octane structure, and a Au-catalyzed diastereoselective formal [2 + 2] cycloaddition for construction of the harziane diterpenoid tetracyclic framework. The developed method paves the way for achieving total synthesis of this type of complex natural product.

Gold-Catalyzed Synthesis of Small Rings

Three- and four-membered rings, widespread motifs in nature and medicinal chemistry, have fascinated chemists ever since their discovery. However, due to energetic considerations, small rings are often difficult to assemble. In this regard, homogeneous gold catalysis has emerged as a powerful tool to construct these highly strained carbocycles. This review aims to provide a comprehensive summary of all the major advances and discoveries made in the gold-catalyzed synthesis of cyclopropanes, cyclopropenes, cyclobutanes, cyclobutenes, and their corresponding heterocyclic or heterosubstituted analogs.

Gold-Catalyzed Synthetic Strategies towards Four-Carbon Ring Systems

Four carbon ring systems are frequently present in natural products with remarkable biological activities such as terpenoids, alkaloids, and steroids. The development of new strategies for the assembly of these structures in a rapid and efficient manner has attracted the interest of synthetic chemists for a long time. The current research is focused mainly on the development of synthetic methods that can be performed under mild reaction conditions with a high tolerance to functional groups. In recent years, gold complexes have turned into excellent candidates for this aim, owing to their high reactivity, and are thus capable of promoting a wide range of transformations under mild conditions. Their remarkable efficiency has been thoroughly demonstrated in the synthesis of complex organic molecules from simple starting materials. This review summarizes the main synthetic strategies described for gold-catalyzed four-carbon ring formation, as well as their application in the synthesis of natural products.

Recent Progress in N-Heterocyclic Carbene Gold-Catalyzed Reactions of Alkynes Involving Oxidation/Amination/Cycloaddition

Recent rapid development in homogeneous gold catalysis affords an alternative and particularly thriving strategy for the generation of gold carbenes through gold-catalyzed oxidation/amination/cycloaddition of alkynes, while it avoids the employment of hazardous and potentially explosive diazo compounds as starting materials for carbene generation. In addition to facile and secure operation, gold carbenes generated in this strategy display good chemoselectivity distinct from other metal carbenes produced from the related diazo approach. N-heterocyclic carbene (NHC) gold is a special metal complex that can be used as ancillary ligands, which provides enhanced stability and can also act as an efficient chiral directing group. In this review, we will present an overview of these recent advances in alkyne oxidation/amination/cycloaddition by highlighting their specificity and applicability, aiming to facilitate progress in this very exciting area of research.

Acetylene as a Dicarbene Equivalent for Gold(I) Catalysis: Total Synthesis of Waitziacuminone in One Step

The gold(I)-catalyzed reaction of acetylene gas with alkenes leads to (Z,Z)-1,4-disubstituted 1,3-butadienes and biscyclopropanes depending on the donor ligand on gold(I). Acetylene was generated in situ from calcium carbide and water in a user-friendly procedure. Reaction of acetylene with 1,5-dienes gives rise stereoselectively to tricyclo[5.1.0.02,4 ]octanes. This novel double cyclopropanation has been applied to the one step total synthesis of the natural product waitziacuminone from acetylene and geranyl acetone.

Transition metal-free cyclobutene rearrangement in fused naphthalen-1-ones: controlled access to functionalized quinones

The divergent preparation of 1,4-naphthoquinones and tetraphene-7,12-diones, which bear the ABCD-ring of landomycins, has been accomplished directly through oxidative reorganization of previously non-isolable cyclobuta[a]naphthalen-4(2H)-ones.

Monoaurated vs. diaurated intermediates: causality or independence?

Diaurated intermediates of gold-catalysed reactions have been a long-standing subject of debate. Although diaurated complexes were regarded as a drain of active monoaurated intermediates in catalytic cycles, they were also identified as the products of gold-gold cooperation in dual-activation reactions. This study shows investigation of intermediates in water addition to alkynes catalysed by [(IPr)Au(CH3CN)(BF4)]. Electrospray ionisation mass spectrometry (ESI-MS) allowed us to detect both monoaurated and diaurated complexes in this reaction. Infrared photodissociation spectra of the trapped complexes show that the structure of the intermediates corresponds to α-gold ketone intermediates protonated or aurated at the oxygen atom. Delayed reactant labelling experiments provided the half life of the intermediates in reaction of 1-phenylpropyne (∼7 min) and the kinetic isotope effects for hydrogen introduction to the carbon atom (KIE ∼ 4-6) and for the protodeauration (KIE ∼ 2). The results suggest that the ESI-MS detected monoaurated and diaurated complexes report on species with a very similar or the same kinetics in solution. Kinetic analysis of the overall reaction showed that the reaction rate is first-order dependent on the concentration of the gold catalyst. Finally, all results are consistent with the reaction mechanism proceeding via monoaurated neutral α-gold ketone intermediates only.

Cyclopropane-alkene metathesis by gold(i)-catalyzed decarbenation of persistent cyclopropanes

A gold(i)-catalyzed cyclopropane-alkene metathesis has been demonstrated with two new families of cyclopropane derivatives of naphthalene and phenanthrene (benzo-fused norcaradienes). In this process, metal carbene units are transferred from a persistent cyclopropane to an alkene, upon release of naphthalene or phenanthrene, allowing the diastereoselective synthesis of a wide range of aryl and vinyl cyclopropanes.

Theoretical Study of the Addition of Cu-Carbenes to Acetylenes to Form Chiral Allenes

Terminal alkynes have become one of the most versatile building blocks for C-C bond construction in the past few decades, and they are usually considered to convert to acetylides before further transformations. In this study, a novel direct nucleophilic addition mode for Cu(I)-catalyzed cross-coupling of terminal alkynes and N-tosylhydrazones to synthesize chiral allenes is proposed, and it was investigated by density functional theory with the M11-L density functional. Three different reaction pathways were considered and investigated. The computational results show that the proposed reaction pathway, which includes direct nucleophilic attack of protonated acetylene, deprotonation of the vinyl cation, and catalyst regeneration, is the most favorable pathway. Another possible deprotonation-carbenation-insertion pathway is shown to be unfavorable. The direct nucleophilic addition step is the rate- and enantioselectivity-determining step in the catalytic cycle. Noncovalent interaction analysis shows that the steric effect between the methyl group of the carbene moiety and the naphthalyl group of the bisoxazoline ligand is important to control the enantioselectivity. In addition, calculation of a series of chiral bisoxazoline ligands shows that a bulky group on the oxazoline ring is favorable for high enantioselectivity, which agrees with experimental observations. Moreover, copper acetylides are stable, and their generation is a favorable pathway in the absence of chiral bisoxazoline ligands.

Enantioselective Rhodium-Catalyzed Cycloisomerization of 1,6-Allenynes to access 5/6-Fused Bicycle[4.3.0]nonadienes

Transition-metal-catalyzed cycloisomerization of 1,n-allenynes represents a powerful synthetic tool to rapidly assemble complex polycyclic skeletons from simple linear substrates. Nevertheless, there are no reports of the asymmetric version of these reactions. Moreover, most of these reactions proceed through a 6-endo-dig cyclization pathway, which preferentially delivers the distal product (via 5/5 rhodacyclic intermediate) rather than the proximal one (via 6/5 rhodacyclic intermediate). Herein, we report an enantioselective rhodium(I)-catalyzed cycloisomerization of 1,6-allenynes to provide the proximal product 5/6-fused bicycle[4.3.0]nonadienes in good yields and with excellent enantioselectivities. Remarkably, this chemistry works perfectly for 1,6-allenynes having a cyclic substituent within the allene component, thereby affording synthetically formidable tricyclic products with excellent enantioselectivities. Moreover, extensive DFT calculations suggest an uncommon pathway involving 5-exo-dig cycloisomerization, ring-expansion, rate-determining alkene isomerization involving C_sp3-H activation, C-C activation of the cyclobutene moiety and finally reductive elimination. Deuterium labeling experiments support the rate-determining step involving the C–H bond activation in this transformation.

Cycloisomerization of 1,n-allenynes allows to efficiently assembly polycyclic skeletons, however its asymmetric variant remains elusive. Here, the authors report the enantioselective Rh(I)-catalyzed cycloisomerization of 1,6-allenynes and disclose an uncommon 5-exo-dig pathway via DFT calculations.

Temperature-Controlled Divergent Hydroamination Cyclization [2+2]-Cycloaddition Cascade Reactions of Homopropargylic Amines with 2-Butynedioates: Direct Access To Pyrrolo- b-cyclobutene and Dihydro-1 H-azepines

The diversified temperature-controlled hydroamination cyclization cascade reactions of homopropargylic amines and 2-butynedioates were developed for the construction of various pyrrolo- b-cyclobutenes and dihydro-1 H-azepines, respectively. This reaction actually involved an intramolecular hydroamination cyclization of homopropargylic amines to give the active dihydropyrroles intermediates, which subsequently underwent [2+2]-cycloaddition with 2-butynedioates to generate the pyrrolo- b-cyclobutenes at no more than 120 °C. Alternatively, the dihydro-1 H-azepines were directly produced at 150 °C in the reactions of homopropargylic amines and 2-butynedioates. The application of substrate scope was wide, and the corresponding products were obtained in high to excellent yields.

Theoretical Insight into the Au(I)-Catalyzed Intermolecular Condensation of Homopropargyl Alcohols with Terminal Alkynes: Reactant Stoichiometric Ratio-Controlled Chemodivergence

The mechanisms and chemoselectivities on the Au(I)-catalyzed intermolecular condensation between homopropargyl alcohols and terminal alkynes were investigated by performing DFT calculations. The reaction was indicated to involve three stages: transformation of the homopropargyl alcohol (R₁) via intramolecular cyclization to the cyclic vinyl ether (R₁'), formation of the C-2-arylalkynyl cyclic ether (P₁) via hydroalkynylation of R₁' with phenylacetylene (R₂), and conversion from P₁ to 2,3-dihydro-oxepine (P₂). The results revealed the origin of the reaction divergence and rationalized the experimental observations that a 1:3 reactant stoichiometric ratio affords P₁ as the major product, whereas the 1:1.1 ratio results in P₂ in high yield. The reactant stoichiometric ratio-controlled divergent reactivity is attributed to different catalytic activities of the gold catalyst toward different reaction stages. In the 1:3 situation, the excess R₂ induces the Au catalyst toward its dimerization and/or hydration, inhibiting the conversion of P₁ to P₂ and resulting in product P₁. Without excess R₂, the Au catalysis follows a general cascade reaction, leading to product P₂. Theoretical results described a general strategy controlling the reaction divergence by a different reactant stoichiometric ratio. This strategy may be enlightening for chemists who are exploring various synthesis methods with high chemo-, regio-, and enantioselectivities.

Diastereospecific Gold(I)-Catalyzed Cyclization Cascade for the Controlled Preparation of N- and N,O-Heterocycles

The reaction of oxime-tethered 1,6-enynes with a cationic gold(I) catalyst demonstrates a great potential for the synthesis of a range of heterocycles in a diastereospecific fashion. The control of the configuration of the oxime and the alkene of the enyne moiety is the key to selectively obtain dihydro-1,2-oxazines, isoxazolines or dihydropyrrole-N-oxides as single diastereoisomers. As supported by DFT calculations, these cascade reactions proceed stepwise, by the intramolecular addition of the O or N atom of the oxime onto cyclopropyl gold(I) carbene intermediates. In this study, a rare [3,3]-sigmatropic rearrangement of nitrones is also observed.

Catalytic Double [2 + 2] Cycloaddition Relay Enabled C-C Triple Bond Cleavage of Yne-Allenones

An unusual catalytic double [2 + 2] cycloaddition relay reaction of yne-allenones with unactivated alkenes and alkynes has been achieved, which enabled C-C triple-bond cleavage to access more than 60 examples of functionalized phenanthren-9-ols with generally good yields. This reaction provides a regioselective and practical method for the construction of carbocyclic ring systems with a high degree of functional group compatibility. Aside from surveying the scope of this transformation, mechanistic details of this process are provided by conducting systematic theoretical calculations.

Thermally Stable Gold(III) Alkene and Alkyne Complexes: Synthesis, Structures, and Assessment of the trans-Influence on Gold-Ligand Bond Enthalpies

The reaction of [C^C)Au(OEt₂ )₂ ]⁺ with 1,5-cyclooctadiene or norbornadiene affords the corresponding olefin complexes [(C^C)Au(COD)]SbF₆ and [(C^C)Au(NBD)]SbF₆ , which are thermally stable in solution and the solid state (C^C=4,4'-di-tert-butylbiphenyl-2,2'-diyl). The crystal structures of these complexes have been determined. By contrast, dienones such as dibenzylideneacetone are O- rather than C=C-bonded. The reactions of (C^C)Au(OAc^F )(L) (L=PMe₃ or CNxyl) with B(C₆ F₅ )₃ in the presence of bis(1-adamantyl)acetylene give the mixed-ligand alkyne complexes [(C^C)Au(AdC≡CAd)(L)]⁺ , the first complexes of their type in gold chemistry. In the presence of an excess of acetylene these compounds are thermally stable in solution and as solids. The bonding of n- and π-donor ligands to Au^III fragments and the effect of the trans influence exerted by N- and C-donors was explored with the aid of DFT calculations. Results show that the Au-L bond enthalpies trans to anionic C are 35-60 % of the enthalpies trans to N, with strong π-acceptors being particularly affected. In comparison with [Me₂ Au]⁺ , the [(C^C)Au]⁺ fragment is more polar and in bond enthalpy terms resembles Me₂ Pt.

Au-Catalyzed Intermolecular [2+2] Cycloadditions between Chloroalkynes and Unactivated Alkenes

The [2+2] cycloaddition is a versatile strategy for the synthesis of strained cyclobutenes of high synthetic value. In this study, two efficient intermolecular [2+2] cycloadditions between two different types of chloroalkynes and unactivated alkene are realized with gold catalysis. Of significance is that the reaction works with challenging monosubstituted unactivated alkenes, which is unprecedented in gold catalysis and scarcely documented in other metal-catalyzed/promoted reactions; moreover, the reaction exhibits excellent regioselectivities, which are much better than those reported in literature. With 1,2-disubstituted unactivated alkenes, the reaction is largely stereospecific. The cyclobutene products can be prepared in nearly gram scale and readily undergo further reactions including various cross-coupling reactions using the C(sp2)-Cl and/or C(sp2)-SPh bond, which in turn substantially broaden the scope of accessible cyclobutenes and enhance the synthetic utility of this bimolecular reaction.

Highly Strained Organogold Complexes and Their Gold- or Rhodium-Catalyzed Isomerizations

The synthesis and characterization of (NHC)(tricyclo[4.1.0.0^2,7 ]hept-1-yl)gold(I) compounds is reported. Several of these organometallic compounds could be obtained by transmetalation from the organolithium precursor to the corresponding (NHC)gold(I) chlorides. These are by far the most strained stable organogold compounds reported so far. With these new compounds we were able to efficiently and selectively accomplish the first gold-catalyzed rearrangement of organogold compounds, even better yields were obtained by the first rhodium-catalyzed rearrangement of these organogold species. (E/Z)-Mixtures of (NHC)(cyclohex-2-en-1-ylidenemethyl)gold(I) were obtained, none of the other known rearrangement products of tricycloheptanes. Additional insight into the chemical and physical properties of the strained compounds was obtained by spectroscopic and computational studies.

Insights into Ag(i)-catalyzed addition reactions of amino alcohols to electron-deficient olefins: competing mechanisms, role of catalyst, and origin of chemoselectivity

The competing mechanisms of Ag(i)-catalyzed chemoselective addition reactions of amino alcohols and electron-deficient olefins leading to the O-adduct or N-adduct products were systematically studied with density functional theory methods. Calculations indicate that the AgHMDS/dppe versus AgOAc/dppe catalytic systems can play different roles and thereby generate two different products. The AgHMDS/dppe system works as a Brønsted base to deprotonate the amino alcohol OH to form the Ag–O bond, which leads to formation of the O-adduct. In contrast, the AgOAc/dppe system mainly acts as a Lewis acid to coordinate with O and N atoms of the amino alcohol, but it cannot act as the Brønsted base to further activate the OH group because of its weaker basicity. Therefore, the AgOAc/dppe catalyzed reaction has a mechanism that is similar to the non-catalyzed reaction, and generates the same N-adduct. The obtained insights will be important for rational design of the various kinds of cooperatively catalyzed chemoselective addition reactions, including the use of the less nucleophilic hydroxyl groups of unprotected amino alcohols.

The origin of the chemoselectivities of Ag(i)-catalyzed addition reactions of amino alcohols to olefin has been predicted for the first time.

Gold- and silver-catalyzed intramolecular annulation and rearrangement of aniline-linked 1,6-enynes containing methylenecyclopropanes

A new synthetic approach for the construction of 1,2-dihydroquinolines having a methylenecyclopropane moiety or a cyclobutene moiety has been developed from gold- and silver-catalyzed annulation of N-tethered 1,6-enynes containing methylenecyclopropanes.

Palladium triggered diene formation from nitro allylic compounds: a versatile entry into naphthalene derivatives

Dienes from Tsuji–Trost elimination of nitrite: a powerful access to functionalized naphthalenes.

Role of σ,π-Digold(I) Alkyne Complexes in Reactions of Enynes

Gold(I) acetylide and σ,π-digold(I) alkyne complexes derived from one prototypical 1,6-enyne and from 7-ethynyl-1,3,5-cycloheptatriene have been prepared and structurally characterized. Their possible role in gold(I)-catalyzed cycloisomerizations has been studied by experiment and by DFT calculations. Gold(I) acetylides are totally unproductive complexes in the absence of Brønsted acids. Similarly, no cyclizations were observed by heating σ,π-digold(I) alkyne digold(I) at least up to 130 °C. Theoretical studies provide a rationale for the much lower reactivity of digold species in reactions of enynes.