Nonadditive Ion Effects Drive Both Collapse and Swelling of Thermoresponsive Polymers in Water

Ionic Effect on the Microenvironment of Biomolecular Condensates

Biomolecules such as proteins and RNA could organize to form condensates with distinct microenvironments through liquid-liquid phase separation (LLPS). Recent works have demonstrated that the microenvironment of biomolecular condensates plays a crucial role in mediating biological activities, such as the partition of biomolecules, and the subphase organization of the multiphasic condensates. Ions could influence the phase transition point of LLPS, following the Hofmeister series. However, the ion-specific effect on the microenvironment of biomolecular condensates remains unknown. In this study, we utilized fluorescence lifetime imaging microscopy (FLIM), fluorescence recovery after photobleaching (FRAP), and microrheology techniques to investigate the ion effect on the microenvironment of condensates. We found that ions significantly affect the microenvironment of biomolecular condensates: salting-in ions increase micropolarity and reduce the microviscosity of the condensate, while salting-out ions induce opposing effects. Furthermore, we manipulate the miscibility and multilayering behavior of condensates through ion-specific effects. In summary, our work provides the first quantitative survey of the microenvironment of protein condensates in the presence of ions from the Hofmeister series, demonstrating how ions impact micropolarity, microviscosity, and viscoelasticity of condensates. Our results bear implications on how membrane-less organelles would exhibit varying microenvironments in the presence of continuously changing cellular conditions.

Anion Competition at Positively Charged Surfactant Monolayers

Interactions of anions with hydrophobic surfaces of proteins and water-soluble polymers depend on the ability of the ions to shed their hydration shells. At positively charged surfactant monolayers, the interactions of anions are less well understood. Due to the interplay of electrostatic surface forces, hydration effects, and ion-ion interactions in the electrostatic double layer, a comprehensive microscopic picture remains elusive. Herein, we study the interactions of chloride, bromide, and a mixture of these two anions at the aqueous interface of dihexadecyldimethylammonium (DHDA+) and dioctadecyldimethylammonium (DODA+) cationic monolayers. Using molecular dynamics simulations and three surface-sensitive X-ray scattering techniques, we demonstrate that bromide interacts preferentially over chloride with both monolayers. The structure of the two monolayers and their interfacial electron density profiles obtained from the simulations quantitatively reproduce the experimental data. We observe that chloride and bromide form contact ion pairs with the quaternary ammonium groups on both monolayers. However, ion pairing with bromide leads to a greater reduction in the number of water molecules hydrating the anion, resulting in more energetically stable ion pairs. This leads to long-range (>3 nm) lateral correlations between bromide ions on the structured DODA+ monolayer. These observations indicate that ion hydration is the dominant factor determining the interfacial electrolyte structure.

Synergistic Assembly of Charged Oligomers and Amino Acids at the Air-Water Interface: An Avenue toward Surface-Directed CO2 Capture

Interfaces are considered a major bottleneck in the capture of CO2 from air. Efforts to design surfaces to enhance CO2 capture probabilities are challenging due to the remarkably poor understanding of chemistry and self-assembly taking place at these interfaces. Here, we leverage surface-specific vibrational spectroscopy, Langmuir trough techniques, and simulations to mechanistically elucidate how cationic oligomers can drive surface localization of amino acids (AAs) that serve as CO2 capture agents speeding up the apparent rate of absorption. We demonstrate how tuning these interfaces provides a means to facilitate CO2 capture chemistry to occur at the interface, while lowering surface tension and improving transport/reaction probabilities. We show that in the presence of interfacial AA-rich aggregates, one can improve capture probabilities vs that of a bare interface, which holds promise in addressing climate change through the removal of CO2 via tailored interfaces and associated chemistries.

Stimuli-triggered multilayer films in response to temperature and ionic strength changes for controlled favipiravir drug release

The block copolymer micelles and natural biopolymers were utilized to form layer-by-layer (LbL) films via electrostatic interaction, which were able to effectively load and controllably release favipiravir, a potential drug for the treatment of coronavirus epidemic. The LbL films demonstrated reversible swelling/shrinking behavior along with the manipulation of temperature, which could also maintain the integrity in the structure and the morphology. Due to dehydration of environmentally responsive building blocks, the drug release rate from the films was decelerated by elevating environmental temperature and ionic strength. In addition, the pulsed release of favipiravir was observed from the multilayer films under the trigger of temperature, which ensured the precise control in the content of the therapeutic reagents at a desired time point. The nanoparticle-based LbL films could be used for on-demandin vitrorelease of chemotherapeutic reagents.

Interactions between the protein barnase and co-solutes studied by NMR

Protein solubility and stability depend on the co-solutes present. There is little theoretical basis for selection of suitable co-solutes. Some guidance is provided by the Hofmeister series, an empirical ordering of anions according to their effect on solubility and stability; and by osmolytes, which are small organic molecules produced by cells to allow them to function in stressful environments. Here, NMR titrations of the protein barnase with Hofmeister anions and osmolytes are used to measure and locate binding, and thus to separate binding and bulk solvent effects. We describe a rationalisation of Hofmeister (and inverse Hofmeister) effects, which is similar to the traditional chaotrope/kosmotrope idea but based on solvent fluctuation rather than water withdrawal, and characterise how co-solutes affect protein stability and solubility, based on solvent fluctuations. This provides a coherent explanation for solute effects, and points towards a more rational basis for choice of excipients.

Visualizing Water Monomers and Chiral OH-(H2O) Complexes Infiltrated in a Macroscopic Hydrophobic Teflon Matrix

Insights into the interaction of fluoroalkyl groups with water are crucial to understanding the polar hydrophobicity of fluorinated compounds, such as Teflon. While an ordered hydrophobic-like 2D water layer has been demonstrated to be present on the surface of macroscopically hydrophobic fluorinated polymers, little is known about how the water infiltrates into the Teflon and what is the molecular structure of the water infiltrated into the Teflon. Using highly sensitive femtosecond sum frequency generation vibrational spectroscopy (SFG-VS), we observe for the first time that monomeric H2O and chiral OH-(H2O) complexes are present in macroscopically hydrophobic Teflon. The species are inhomogeneously distributed inside the Teflon matrix and at the Teflon surface. No water clusters or single-file water "wires" are observed in the matrix. SFG free induction decay (SFG-FID) experiments demonstrate that the OH oscillators of physically absorbed molecular water at the surface dephase on the time scale of <230 fs, whereas the water monomers and hydrated hydroxide ions infiltrated in the Teflon matrix dephase much more slowly (680-830 fs), indicating that the embedded monomeric H2O and OH-(H2O) complexes are decoupled from the outer environment. Our findings can well interpret ultrafast water permeation through fluorous nanochannels and the charging mechanism of Teflon, which may tailor the desired applications of organofluorines.

Solvation Behavior of Elastin-like Polypeptides in Divalent Metal Salt Solutions

The effects of CaCl2 and MgCl2 on the cloud point temperature of two different elastin-like polypeptides (ELPs) were studied using a combination of cloud point measurements, molecular dynamics simulations, and infrared spectroscopy. Changes in the cloud point for the ELPs in aqueous divalent metal cation solutions were primarily governed by two competing interactions: the cation-amide oxygen electrostatic interaction and the hydration of the cation. In particular, Ca2+ cations can more readily shed their hydration shells and directly contact two amide oxygens by the formation of ion bridges. By contrast, Mg2+ cations were more strongly hydrated and preferred to partition toward the amide oxygens along with their hydration shells. In fact, although hydrophilic ELP V5A2G3 was salted-out at low concentrations of MgCl2, it was salted-in at higher salt concentrations. By contrast, CaCl2 salted the ELP sharply out of solution at higher salt concentrations because of the bridging effect.

Anions and Cations Affect Amino Acid Dissociation Equilibria via Distinct Mechanisms

Salts reduce the pKa of weak acids by a mechanism sensitive to ion identity and concentration via charge screening of the deprotonated state. In this study, we utilize constant pH molecular dynamics simulations to understand the molecular mechanism behind the salt-dependent dissociation of aspartic acid (Asp). We calculate the pKa of Asp in the presence of a monovalent salt and investigate Hofmeister ion effects by systematically varying the ionic radii. We observe that increasing the anion size leads to a monotonic decrease in Asp pKa. Conversely, the cation size affects the pKa nonmonotonically, interpretable in the context of the law of matching water affinity. The net effect of salt on Asp acidity is governed by an interplay of solvation and competing ion interactions. The proposed mechanism is rather general and can be applicable to several problems in Hofmeister ion chemistry, such as pH effects on protein stability and soft matter interfaces.

Ions Speciation at the Water-Air Interface

In typical aqueous systems, including naturally occurring sweet and salt water and tap water, multiple ion species are co-solvated. At the water-air interface, these ions are known to affect the chemical reactivity, aerosol formation, climate, and water odor. Yet, the composition of ions at the water interface has remained enigmatic. Here, using surface-specific heterodyne-detected sum-frequency generation spectroscopy, we quantify the relative surface activity of two co-solvated ions in solution. We find that more hydrophobic ions are speciated to the interface due to the hydrophilic ions. Quantitative analysis shows that the interfacial hydrophobic ion population increases with decreasing interfacial hydrophilic ion population at the interface. Simulations show that the solvation energy difference between the ions and the intrinsic surface propensity of ions determine the extent of an ion's speciation by other ions. This mechanism provides a unified view of the speciation of monatomic and polyatomic ions at electrolyte solution interfaces.

Ion-specific binding of cations to the carboxylate and of anions to the amide of alanylalanine

Studies of ion-specific effects on oligopeptides have aided our understanding of Hofmeister effects on proteins, yet the use of different model peptides and different experimental sensitivities have led to conflicting conclusions. To resolve these controversies, we study a small model peptide, L-Alanyl-L-alanine (2Ala), carrying all fundamental chemical protein motifs: C-terminus, amide bond, and N-terminus. We elucidate the effect of GdmCl, LiCl, KCl, KI, and KSCN by combining dielectric relaxation, nuclear magnetic resonance (¹H-NMR), and (two-dimensional) infrared spectroscopy. Our dielectric results show that all ions reduce the rotational mobility of 2Ala, yet the magnitude of the reduction is larger for denaturing cations than for anions. The NMR chemical shifts of the amide group are particularly sensitive to denaturing anions, indicative of anion-amide interactions. Infrared experiments reveal that LiCl alters the spectral homogeneity and dynamics of the carboxylate, but not the amide group. Interaction of LiCl with the negatively charged pole of 2Ala, the COO^- group, can explain the marked cationic effect on dipolar rotation, while interaction of anions between the poles, at the amide, only weakly perturbs dipolar dynamics. As such, our results provide a unifying view on ions' preferential interaction sites at 2Ala and help rationalize Hofmeister effects on proteins.

A simple theory for interfacial properties of dilute solutions

Recent studies suggest that cosolute mixtures may exert significant non-additive effects upon protein stability. The corresponding liquid–vapor interfaces may provide useful insight into these non-additive effects. Accordingly, in this work, we relate the interfacial properties of dilute multicomponent solutions to the interactions between solutes. We first derive a simple model for the surface excess of solutes in terms of thermodynamic observables. We then develop a lattice-based statistical mechanical perturbation theory to derive these observables from microscopic interactions. Rather than adopting a random mixing approximation, this dilute solution theory (DST) exactly treats solute–solute interactions to lowest order in perturbation theory. Although it cannot treat concentrated solutions, Monte Carlo (MC) simulations demonstrate that DST describes the interactions in dilute solutions with much greater accuracy than regular solution theory. Importantly, DST emphasizes a fundamental distinction between the “intrinsic” and “effective” preferences of solutes for interfaces. DST predicts that three classes of solutes can be distinguished by their intrinsic preference for interfaces. While the surface preference of strong depletants is relatively insensitive to interactions, the surface preference of strong surfactants can be modulated by interactions at the interface. Moreover, DST predicts that the surface preference of weak depletants and weak surfactants can be qualitatively inverted by interactions in the bulk. We also demonstrate that DST can be extended to treat surface polarization effects and to model experimental data. MC simulations validate the accuracy of DST predictions for lattice systems that correspond to molar concentrations.

DFT study of common anions adsorption at graphene surface due to anion-π interaction

Using density functional theory (DFT) calculations, we researched the different anions adsorption on the graphene and found that anions can be stably adsorbed on the graphene surface due to the anion-π interaction. The adsorption energy decreased as the order of HPO₄^2- > SO₄^2- > F^- > CH₃COO^- > ClO₃^- > NO₃^- > ClO₄^- > SCN^- > Cl^- > Br^-. The adsorption energy markedly increased as the valence of anion increased from negative monovalence (< -20 kcal/mol) to negative bivalence (> -40 kcal/mol). The energy decomposition analysis (EDA) showed that anion-π interaction is mainly induced by orbital effect. This work provides new insights for understanding Hofmeister effect at graphene interface from the molecular level and indicates that the anion-π interaction cannot be ignored at the interface, especially for the substrate with π-electron-rich carbon-based nanomaterials.

Nanopore Sensing Technique for Studying the Hofmeister Effect

The nanopore sensing technique is an emerging method of detecting single molecules, and extensive research has gone into various fields, including nanopore sequencing and other applications of single-molecule studies. Recently, several researchers have explored the specific ion effects in nanopore channels, enabling a unique understanding of the Hofmeister effect at the single-molecule level. Herein, the recent advances of using nanopore sensing techniques are reviewed to study the Hofmeister effect and the physicochemical mechanism of this process is attempted. The challenges and goals are also discussed for the future in this field.

Understanding specific ion effects and the Hofmeister series

Specific ion effects (SIE), encompassing the Hofmeister Series, have been known for more than 130 years since Hofmeister and Lewith's foundational work. SIEs are ubiquitous and are observed across the medical, biological, chemical and industrial sciences. Nevertheless, no general predictive theory has yet been able to explain ion specificity across these fields; it remains impossible to predict when, how, and to what magnitude, a SIE will be observed. In part, this is due to the complexity of real systems in which ions, counterions, solvents and cosolutes all play varying roles, which give rise to anomalies and reversals in anticipated SIEs. Herein we review the historical explanations for SIE in water and the key ion properties that have been attributed to them. Systems where the Hofmeister series is perturbed or reversed are explored, as is the behaviour of ions at the liquid-vapour interface. We discuss SIEs in mixed electrolytes, nonaqueous solvents, and in highly concentrated electrolyte solutions - exciting frontiers in this field with particular relevance to biological and electrochemical applications. We conclude the perspective by summarising the challenges and opportunities facing this SIE research that highlight potential pathways towards a general predictive theory of SIE.

Design of hydrogel-microgel composites with tailored small molecule release profiles

Stimuli-responsive hydrogel-microgel composites (HMC) were prepared by embedding poly(N-isopropylacrylamide)-based microgels in a poly(N-isopropylacrylamide)-based hydrogel. When the microgels were pre-loaded with the small molecule model drug crystal violet (CV) via electrostatics, the HMC was able to release the CV in a pH-triggered fashion. We found that the CV release rate was dependent on the solution temperature and the dimension of the material. Also, by changing the chemical composition and/or pore size of the hydrogel matrix, the CV release kinetics can be tuned. Moreover, when multiple microgels loaded with different model drugs were embedded in a single HMC, the HMC can be used to control the release rate of each drug analog individually in a pH-dependent fashion. By understanding how properties of a hydrogel can alter the release of small molecules from embedded microgels, new materials capable of controlled and triggered release of multiple small molecule drugs can be designed with myriad uses in the biomedical field.

Cononsolvency of thermoresponsive polymers: where we are now and where we are going

Cononsolvency is an intriguing phenomenon where a polymer collapses in a mixture of good solvents. This cosolvent-induced modulation of the polymer solubility has been observed in solutions of several polymers and biomacromolecules, and finds application in areas such as hydrogel actuators, drug delivery, compound detection and catalysis. In the past decade, there has been a renewed interest in understanding the molecular mechanisms which drive cononsolvency with a predominant emphasis on its connection to the preferential adsorption of the cosolvent. Significant efforts have also been made to understand cononsolvency in complex systems such as micelles, block copolymers and thin films. In this review, we will discuss some of the recent developments from the experimental, simulation and theoretical fronts, and provide an outlook on the problems and challenges which are yet to be addressed.

How Temperature Rise Can Induce Phase Separation in Aqueous Biphasic Solutions

Ionic-liquid-based acidic aqueous biphasic solutions (AcABSs) recently offered a breakthrough in the field of metal recycling. The particular mixture of tributyltetradecylphosphonium chloride ([P_4,4,4,14]Cl), acid, and water presents the unusual characteristic of a lower solution critical temperature (LCST), leading to phase separation upon a temperature rise of typically a few tens of degrees. We address here the microscopic mechanisms driving the phase separation. Using small-angle neutron scattering, we characterized the spherical micelle formation in a binary ionic liquid/water solution and the micelle aggregation upon the addition of acid due to the screening of electrostatic repulsion. The increase in both the acid concentration and the temperature eventually leads to micelle flocculation and phase separation. This last step is achieved through chloride ion adsorption at the surface of the micelle. This exothermic adsorption compensates for the entropic cost, leading to a counterintuitive behavior, and may be generalized to a number of molecular systems with an LCST.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Nonadditive ion effects on the coil-globule equilibrium of PNIPAM: A computer simulation study

The combined effect of a weakly hydrated and a strongly hydrated anion on the lower critical solution temperature (LCST) of poly(N-isopropylacrylamide)(PNIPAM) is nonadditive (Bruce et al. J. Am. Chem. Soc....

Specific Ion-Protein Interactions Influence Bacterial Ice Nucleation

Ice nucleation‐active bacteria are the most efficient ice nucleators known, enabling the crystallization of water at temperatures close to 0 °C, thereby overcoming the kinetically hindered phase transition process at these conditions. Using highly specialized ice‐nucleating proteins (INPs), they can cause frost damage to plants and influence the formation of clouds and precipitation in the atmosphere. In nature, the bacteria are usually found in aqueous environments containing ions. The impact of ions on bacterial ice nucleation efficiency, however, has remained elusive. Here, we demonstrate that ions can profoundly influence the efficiency of bacterial ice nucleators in a manner that follows the Hofmeister series. Weakly hydrated ions inhibit bacterial ice nucleation whereas strongly hydrated ions apparently facilitate ice nucleation. Surface‐specific sum‐frequency generation spectroscopy and molecular dynamics simulations reveal that the different effects are due to specific interactions of the ions with the INPs on the surface of the bacteria. Our results demonstrate that heterogeneous ice nucleation facilitated by bacteria strongly depends upon the nature of the ions, and specific ion–protein interactions are essential for the complete description of heterogeneous ice nucleation by bacteria.

An interplay of excluded-volume and polymer-(co)solvent attractive interactions regulates polymer collapse in mixed solvents

Cosolvent effects on the coil-globule transitions in aqueous polymer solutions are not well understood, especially in the case of amphiphilic cosolvents that preferentially adsorb on the polymer and lead to both polymer swelling and collapse. Although a predominant focus in the literature has been placed on the role of polymer-cosolvent attractive interactions, our recent work has shown that excluded-volume interactions (repulsive interactions) can drive both preferential adsorption of the cosolvent and polymer collapse via a surfactant-like mechanism. Here, we further study the role of polymer-(co)solvent attractive interactions in two kinds of polymer solutions, namely, good solvent (water)-good cosolvent (alcohol) (GSGC) and poor solvent-good cosolvent (PSGC) solutions, both of which exhibit preferential adsorption of the cosolvent and a non-monotonic change in the polymer radius of gyration with the addition of the cosolvent. Interestingly, at low concentrations, the polymer-(co)solvent energetic interactions oppose polymer collapse in the GSGC solutions and contrarily support polymer collapse in the PSGC solutions, indicating the importance of the underlying polymer chemistry. Even though the alcohol molecules are preferentially adsorbed on the polymer, the trends of the energetic interactions at low cosolvent concentrations are dominated by the polymer-water energetic interactions in both the cases. Therefore, polymer-(co)solvent energetic interactions can either reinforce or compensate the surfactant-like mechanism, and it is this interplay that drives coil-to-globule transitions in polymer solutions. These results have implications for rationalizing the cononsolvency transitions in real systems such as polyacrylamides in aqueous alcohol solutions where the understanding of microscopic driving forces is still debatable.

Contact Ion Pairs in the Bulk Affect Anion Interactions with Poly(N-isopropylacrylamide)

Salt effects on the solubility of uncharged polymers in aqueous solutions are usually dominated by anions, while the role of the cation with which they are paired is often ignored. In this study, we examine the influence of three aqueous metal iodide salt solutions (LiI, NaI, and CsI) on the phase transition temperature of poly(N-isopropylacrylamide) (PNIPAM) by measuring the turbidity change of the solutions. Weakly hydrated anions, such as iodide, are known to interact with the polymer and thereby lead to salting-in behavior at low salt concentration followed by salting-out behavior at higher salt concentration. When varying the cation type, an unexpected salting-out trend is observed at higher salt concentrations, Cs⁺ > Na⁺ > Li⁺. Using molecular dynamics simulations, it is demonstrated that this originates from contact ion pair formation in the bulk solution, which introduces a competition for iodide ions between the polymer and cations. The weakly hydrated cation, Cs⁺, forms contact ion pairs with I^- in the bulk solution, leading to depletion of CsI from the polymer-water interface. Microscopically, this is correlated with the repulsion of iodide ions from the amide moiety.

Reversed Anionic Hofmeister Effect in Metal-Phenolic-Based Film Formation

Although metal-phenolic species have emerged as one of the versatile material-independent-coating materials, providing attractive tools for interface engineering, mechanistic understanding of their film formation and growth still remains largely unexplored. Especially, the anions have been overlooked despite their high concentration in the coating solution. Considering that the anions are critical in the reactivity of metal-organic complex and the formation and/or property of functional materials, we investigated the anionic effects on the characteristics of film formation, such as film thickness and properties, in the Fe³⁺-tannic acid coating. We found that the film characteristics were strongly dictated by the counteranions (e.g., SO₄^2-, Cl^-, and Br^-) of the Fe³⁺ ion. Specifically, the film thickness and properties (i.e., mechanical modulus, permeability, and stability) followed the reversed anionic Hofmeister series (Br^- > Cl^- > SO₄^2-). Mechanistic studies suggested that more chaotropic anions, such as Br^-, might induce a more widely extended structure of the Fe³⁺-TA complexes in the coating solution, leading to thicker, harder, but more porous films. The reversed anionic Hofmeister effect was further confirmed by the additive effects of various sodium salts (NaF, NaCl, NaBr, and NaClO₄).

Thermal Behaviour of Common Thermoresponsive Polymers in Phosphate Buffer and in Its Salt Solutions

Thermoresponsive polymers are a promising material for drug nanocarrier preparation, which makes the study of their aggregation in physiological conditions very important. In this paper, the thermal behaviour of the thermoresponsive polymers poly(N-isopropylacrylamide), poly(2-isopropyl-2-oxazoline-co-2-n-propyl-2-oxazoline) and poly[(2-hydroxyethyl methacrylate)-co-oligo(ethylene glycol) methyl ether methacrylate] were studied in phosphate buffer (PBS) and solutions of its salts in concentration as in PBS. The thermal response of the polymers was measured using UV-Vis and dynamic light scattering (DLS). The salts shifted the cloud point temperature (TCP) of the (co)polymers to higher values compared to the TCP of aqueous polymer solutions. In PBS and NaCl solutions, all polymers exhibited an unexpected and previously unreported transmittance profile. During heating, an additional aggregation of polymers appeared above the TCP accompanied by the formation of a precipitate. In monosodium phosphate solutions and pure water, the studied polymers showed lower critical solution temperature (LCST-type) behaviour. DLS measurements showed that a salt influenced the size of the resulting polymer particles. The sizes and stability of particles depended on the heating rate. In PBS and NaCl solutions, the size of particles in the dispersion decreased above 60 °C, and the precipitate appeared on the bottom of the cuvette. The additional aggregation of polymer and its falling out of solution may hinder the removal of carriers from the body and has to be taken into account when preparing nanocarriers.

Poly(N-isopropylacrylamide)-grafted gold nanoparticles at the vapor/water interface

HYPOTHESIS

Grafting nanoparticles surfaces with water-soluble polymers modify interparticle interactions that are pivotal for assembling them into ordered phases. By manipulating salt concentrations of gold nanoparticles (AuNPs) that are grafted with poly(N-isopropylacrylamide) (PNIPAM-AuNPs), we hypothesize that various aggregated phases form at the suspension/vapor interface or in the bulk that depend on the molecular weight (MW) of PNIPAM and on salt concentrations.

EXPERIMENTS

AuNPs are grafted with thiolated PNIPAM of molecular weights of 3 or 6 kDa, and grafting is confirmed by dynamic light scattering. Liquid-surfaces X-ray reflectivity and grazing incidence small-angle X-ray scattering are used to determine the density profiles of the suspension/vapor interface and their inplane structure as salt is added to the suspensions.

FINDINGS

We find that surface enrichment is induced by adding NaCl to the suspensions, and that at low salt concentrations, the monoparticle layer formed is dispersed, and above a threshold salt concentration, depending on MW of PNIPAM, the PNIPAM-AuNPs order in a hexagonal structure. We show that the lattice constant of the two-dimensional hexagonal structure varies with salt concentration, and more significantly with MW of PNIPAM.

Rapid quantification of the malaria biomarker hemozoin by improved biocatalytically initiated precipitation atom transfer radical polymerizations

The fight against tropical diseases such as malaria requires the development of innovative biosensing techniques. Diagnostics must be rapid and robust to ensure prompt case management and to avoid further transmission. The malaria biomarker hemozoin can catalyze atom transfer radical polymerizations (ATRP), which we exploit in a polymerization-amplified biosensing assay for hemozoin based on the precipitation polymerization of N-isopropyl acrylamide (NIPAAm). The reaction conditions are systematically investigated using synthetic hemozoin to gain fundamental understanding of the involved reactions and to greatly reduce the amplification time, while maintaining the sensitivity of the assay. The use of excess ascorbate allows oxygen to be consumed in situ but leads to the formation of reactive oxygen species and to the decomposition of the initiator 2-hydroxyethyl 2-bromoisobutyrate (HEBIB). Addition of sodium dodecyl sulfate (SDS) and pyruvate results in better differentiation between the blank and hemozoin-containing samples. Optimized reaction conditions (including reagents, pH, and temperature) reduce the amplification time from 37 ± 5 min to 3 ± 0.5 min while maintaining a low limit of detection of 1.06 ng mL-1. The short amplification time brings the precipitation polymerization assay a step closer to a point-of-care diagnostic device for malaria. Future efforts will be dedicated to the isolation of hemozoin from clinical samples.

Probing the response of poly (N-isopropylacrylamide) microgels to solutions of various salts using etalons

The Hofmeister series is a qualitative ordering of ions according to their ability to precipitate proteins in aqueous solution and is extremely important to consider when trying to understand materials and biomolecular structure and function. Herein, we utilized optical devices (etalons) composed of poly(N-isopropylacrylamide) (pNIPAm)-co-10% acrylic acid (AAc) or pNIPAm-based microgels to investigate how various salts in the Hofmeister series influenced the microgel hydration state. Etalons were exposed to a series of salts solutions at different concentrations and the position of the peaks in the reflectance spectra monitored using reflectance spectroscopy. As expected, pNIPAm-co-10%AAc microgel-based etalons responded to the presence of ions, although in this case the response to cations deviated from the Hofmeister series. However, when using etalons prepared with pNIPAm-based microgels, the responses followed the Hofmeister series for both cation and anions. Finally, we observed that the sensitivity of etalons prepared with pNIPAm microgels was significantly higher than the response obtained from etalons composed of pNIPAm-co-10%AAc microgels. This was explained by considering the charge on the pNIPAm-co-10%AAc microgels that influences how osmotic and Hofmeister effects impacts hydration state.

A cosolvent surfactant mechanism affects polymer collapse in miscible good solvents

The coil-globule transition of aqueous polymers is of profound significance in understanding the structure and function of responsive soft matter. In particular, the remarkable effect of amphiphilic cosolvents (e.g., alcohols) that leads to both swelling and collapse of stimuli-responsive polymers has been hotly debated in the literature, often with contradictory mechanisms proposed. Using molecular dynamics simulations, we herein demonstrate that alcohols reduce the free energy cost of creating a repulsive polymer-solvent interface via a surfactant-like mechanism which surprisingly drives polymer collapse at low alcohol concentrations. This hitherto neglected role of interfacial solvation thermodynamics is common to all coil-globule transitions, and rationalizes the experimentally observed effects of higher alcohols and polymer molecular weight on the coil-to-globule transition of thermoresponsive polymers. Polymer-(co)solvent attractive interactions reinforce or compensate this mechanism and it is this interplay which drives polymer swelling or collapse.

Competitive specific ion effects in mixed salt solutions on a thermoresponsive polymer brush

HYPOTHESIS

Grafted poly(ethylene glycol) methyl ether methacrylate (POEGMA) copolymer brushes change conformation in response to temperature ('thermoresponse'). In the presence of different ions the thermoresponse of these coatings is dramatically altered. These effects are complex and poorly understood with no all-inclusive predictive theory of specific ion effects. As natural environments are composed of mixed electrolytes, it is imperative we understand the interplay of different ions for future applications. We hypothesise anion mixtures from the same end of the Hofmeister series (same-type anions) will exhibit non-additive and competitive behaviour.

EXPERIMENTS

The behaviour of POEGMA brushes, synthesised via surface-initiated ARGET-ATRP, in both single and mixed aqueous electrolyte solutions was characterised with ellipsometry and neutron reflectometry as a function of temperature.

FINDINGS

In mixed fluoride and chloride aqueous electrolytes (salting-out ions), or mixed thiocyanate and iodide aqueous electrolytes (salting-in ions), a non-monotonic concentration-dependent influence of the two anions on the thermoresponse of the brush was observed. A new term, δ, has been defined to quantitively describe synergistic or antagonistic behaviour. This study determined the specific ion effects imparted by salting-out ions are dependent on available solvent molecules, whereas the influence of salting-in ions is dependent on the interactions of the anions and polymer chains.

Hofmeister Effect in Self-Organized Chemical Systems

We studied the effect of spectator ions in the prototype of far-from-equilibrium self-organized chemical systems, the Belousov-Zhabotinsky (BZ) reaction. In particular, we investigated the specific ion effect of alkali metal cations, connoted for their kosmotropic and chaotropic properties. By means of combined experimental and numerical approaches, we could show a neat and robust evidence for the Hofmeister effect in this system. Spectator cations induce a marked increment of the induction period that preludes regular oscillations and decrease the oscillation amplitude following the sequence Li⁺ < Na⁺ ≪ K⁺ ∼ Cs⁺. These ions affect the system kinetics by interfering in the interaction between the oxidized form of the catalyst and the organic substrate, responsible for resetting the BZ system to pre-autocatalytic (reduced) conditions. The specific ion effect on these key reactive steps is systematically characterized and correlated with different parameters which describe the interaction of the cations with the solvent.

Poly(N,N-bis(2-methoxyethyl)acrylamide), a thermoresponsive non-ionic polymer combining the amide and the ethyleneglycolether motifs

Poly(N,N-bis(2-methoxyethyl)acrylamide) (PbMOEAm) featuring two classical chemical motifs from non-ionic water-soluble polymers, namely, the amide and ethyleneglycolether moieties, was synthesized by reversible addition fragmentation transfer (RAFT) polymerization. This tertiary polyacrylamide is thermoresponsive exhibiting a lower critical solution temperature (LCST)–type phase transition. A series of homo- and block copolymers with varying molar masses but low dispersities and different end groups were prepared. Their thermoresponsive behavior in aqueous solution was analyzed via turbidimetry and dynamic light scattering (DLS). The cloud points (CP) increased with increasing molar masses, converging to 46 °C for 1 wt% solutions. This rise is attributed to the polymers’ hydrophobic end groups incorporated via the RAFT agents. When a surfactant-like strongly hydrophobic end group was attached using a functional RAFT agent, CP was lowered to 42 °C, i.e., closer to human body temperature. Also, the effect of added salts, in particular, the role of the Hofmeister series, on the phase transition of PbMOEAm was investigated, exemplified for the kosmotropic fluoride, intermediate chloride, and chaotropic thiocyanate anions. A pronounced shift of the cloud point of about 10 °C to lower or higher temperatures was observed for 0.2 M fluoride and thiocyanate, respectively. When PbMOEAm was attached to a long hydrophilic block of poly(N,N-dimethylacrylamide) (PDMAm), the cloud points of these block copolymers were strongly shifted towards higher temperatures. While no phase transition was observed for PDMAm-b-pbMOEAm with short thermoresponsive blocks, block copolymers with about equally sized PbMOEAm and PDMAm blocks underwent the coil-to-globule transition around 60 °C.

Counteranions in the Stimulation Solution Alter the Dynamics of Exocytosis Consistent with the Hofmeister Series

We show that the Hofmeister series of ions can be used to explain the cellular changes in exocytosis observed by single-cell amperometry for different counteranions. The formation, expansion, and closing of the membrane fusion pore during exocytosis was found to be strongly dependent on the counteranion species in solution. With stimulation of chaotropic anions (e.g., ClO₄^–), the expansion and closing time of the fusion pore are longer, suggesting chaotropes can extend the duration of exocytosis compared with kosmotropic anions (e.g., Cl^–). At a concentration of 30 mM, the two parameters (e.g., t_1/2 and t_fall) that define the duration of exocytosis vary with the Hofmeister series (Cl^– < Br^– < NO₃^– ≤ ClO₄^– < SCN^–). More interestingly, fewer (e.g., N_foot/N_events) and smaller (e.g., I_foot) prespike events are observed when chaotropes are counterions in the stimulation solution, and the values can be sorted by the reverse Hofmeister series (Cl^– ≥ Br^– > NO₃^– > ClO₄^– > SCN^–). Based on ion specificity, an adsorption-repulsion mechanism, we suggest that the exocytotic Hofmeister series effect originates from a looser swelling lipid bilayer structure due to the adsorption and electrostatic repulsion of chaotropes on the hydrophobic portion of the membrane. Our results provide a chemical link between the Hofmeister series and the cellular process of neurotransmitter release via exocytosis and provide a better physical framework to understand this important phenomenon.

Ionic effects on synthetic polymers: from solutions to brushes and gels

The ionic effects on synthetic polymers have attracted extensive attention due to the crucial role of ions in the determination of the properties of synthetic polymers. This review places the focus on specific ion effects, multivalent ion effects, and ionic hydrophilicity/hydrophobicity effects in synthetic polymer systems from solutions to brushes and gels. The specific ion effects on neutral polymers are determined by both the direct and indirect specific ion-polymer interactions, whereas the ion specificities of charged polymers are mainly dominated by the specific ion-pairing interactions. The ionic cross-linking effect exerted by the multivalent ions is widely used to tune the properties of polyelectrolytes, while the reentrant behavior of polyelectrolytes in the presence of multivalent ions still remains poorly understood. The ionic hydrophilicity/hydrophobicity effects not only can be applied to make strong polyelectrolytes thermosensitive, but also can be used to prepare polymeric nano-objects and to control the wettability of polyelectrolyte brush-modified surfaces. The not well-studied ionic hydrogen bond effects are also discussed in the last section of this review.

Coil-Globule Transition Thermodynamics of Poly(N-isopropylacrylamide)

Thermosensitive polymers such as poly(N-isopropylacrylamide) (PNIPAM) undergo a phase transition in aqueous solution from a random-coil structural ensemble to a globule structural ensemble at the lower critical solution temperature (LCST). Above this temperature, PNIPAM agglomerates and becomes insoluble, whereas it is soluble below the temperature. Thus, thermosensitive polymers represent essential targets for several applications, e.g., in drug delivery. Although their ability to change structure in response to a temperature alteration is highly relevant for industrial processes, their thermodynamic properties are mostly qualitatively understood, and the quantitative thermodynamic picture is still elusive. In this study, we used a combined atomistic molecular dynamics and well-tempered metadynamics simulation approach to estimate coil-globule transition thermodynamics. An isotactic 30-mer of PNIPAM was investigated over a broad temperature range between 200 and 360 K. The transition from the globule to the random-coil structure was observed with well-tempered metadynamics. For the first time, the free energy surface of PNIPAM was estimated and it is shown that the simulation results are in line with the experimentally observed thermosensitive behavior. Below the LCST, the random-coil ensemble represents the global energy minimum and is thermodynamically favored by 21 ± 9 kJ/mol compared to the globule ensemble; both are separated by a barrier of 49 ± 14 kJ/mol. In contrast, above the LCST, the globule ensemble is thermodynamically favored by 21 ± 8 kJ/mol over the random-coil ensemble. The barrier from random-coil to globule is 17 ± 10 kJ/mol.

Specific Ion Effects of Dodecyl Sulfate Surfactants with Alkali Ions at the Air-Water Interface

The influence of Li⁺, Na⁺ and Cs⁺ cations on the surface excess and structure of dodecyl sulfate (DS⁻) anions at the air–water interface was investigated with the vibrational sum-frequency generation (SFG) and surface tensiometry. Particularly, we have addressed the change in amplitude and frequency of the symmetric S-O stretching vibrations as a function of electrolyte and DS⁻ concentration in the presence of Li⁺, Na⁺ and Cs⁺ cations. For the Li⁺ and Na⁺ ions, we show that the resonance frequency is shifted noticeably from 1055 cm⁻¹ to 1063 cm⁻¹ as a function of the surfactants’ surfaces excess, which we attribute to the vibrational Stark effect within the static electric field at the air–water interface. For Cs⁺ ions the resonance frequency is independent of the surfactant concentration with the S-O stretching band centered at 1063 cm⁻¹. This frequency is identical to the frequency at the maximum surface excess when Li⁺ and Na⁺ ions are present and points to the ion pair formation between the sulfate headgroup and Cs⁺ counterions, which reduces the local electric field. In addition, SFG experiments of the O-H stretching bands of interfacial H₂O molecules are used in order to calculate the apparent double layer potential and the degree of dissociation between the surfactant head group and the investigated cations. The latter was found to be 12.0%, 10.4% and 7.7% for lithium dodecyl sulfate (LiDS), sodium dodecyl sulfate (SDS) and cesium dodecyl sulfate (CsDS) surfactants, which is in agreement with Collins ‘rule of matching water affinities’.

The Hofmeister series: Specific ion effects in aqueous polymer solutions

Specific ion effects in aqueous polymer solutions have been under active investigation over the past few decades. The current state-of-the-art research is primarily focused on the understanding of the mechanisms through which ions interact with macromolecules and affect their solution stability. Hence, we herein first present the current opinion on the sources of ion-specific effects and review the relevant studies. This includes a summary of the molecular mechanisms through which ions can interact with polymers, quantification of the affinity of ions for the polymer surface, a thermodynamic description of the effects of salts on polymer stability, as well as a discussion on the different forces that contribute to ion-polymer interplay. Finally, we also highlight future research issues that call for further scrutiny. These include fundamental questions on the mechanisms of ion-specific effects and their correlation with polymer properties as well as a discussion on the specific ion effects in more complex systems such as mixed electrolyte solutions.