Highly Reactive Manganese(IV)-Oxo Porphyrins Showing Temperature-Dependent Reversed Electronic Effect in C-H Bond Activation Reactions

Probing the generation, reactivity, and kinetics of high-valent manganese-oxo phthalocyanines: Insights into oxidation mechanisms

In this study, manganese(IV)-oxo phthalocyanines [MnIV(Pc)(O)] (3) (Pc = phthalocyanine) were produced either through visible light photolysis of [MnIII(Pc)(ClO3)] or by chemical oxidation of [MnIII(Pc)Cl] (1) with iodobenzene diacetate. The manganese(IV)-oxo species under study include tetra-tert-butylphthalocyaine‑manganese(IV)-oxo (3a) and phthalocyanine‑manganese(IV)-oxo (3b). As anticipated, the generated 3 reacted with various organic substrates to yield the oxidized products and further proved to be a competent oxidant via an H218O isotope labeling experiment. The kinetics of oxygen atom transfer (OAT) reactions for these generated 3 species with a range of substrates were examined in CH3CN solutions unless other specified. Overall, the second-order rate constants under pseudo-first-order conditions for 3a and 3b with the same substrates display similar modest reactivity, with the nature of the substrate playing a major role in influencing the reactivity of species 3. The phenol substrates, in particular, reacted the fastest. Of note, second-order rate constants determined for thioanisoles are comparable to those of alkene epoxidations and activated CH bond oxidations. Conventional Hammett analyses of rate constants for substituted styrenes revealed a linear correlation with the σ constant, indicating minimal charge developed at the transition state during the oxidation process. Additionally, the competition product studies and the Hammett correlation analysis further suggested that the manganese(IV)-oxo species observed in those kinetic studies are unlikely to serve as the primary oxidant for the epoxidation reactions catalyzed by manganese(III) phthalocyanine with PhI(OAc)2.

Bridging the Oxo Wall: A New Perspective on High-valent Metal-Oxo Species and Their Reactivity in Mn, Fe, and Co Complexes

The "oxo-wall" is a well-established concept in the area of bioinorganic chemistry, which refers to the instability of the terminal metal-oxo complexes in the +4 oxidation state, with tetragonal C4v symmetry beyond group 8 elements. This leads to a diverse and highly reactive chemistry of Co-oxo complexes, as evidenced in the literature, ranging from challenging C-H bond activation to efficient water oxidation. Despite extensive research on first-row terminal metal-oxo complexes and the "oxo-wall" concept, studies correlating the reactivity of these species across the periodic table remain scarce. In this work, using a combination of DFT and ab initio CASSCF calculations, we have explored the structure, bonding, and reactivity of [MIV/V(15-TMC)(O)(CH3CN)]m+ (M= Mn, Fe and Co) species. Our study reveals several intriguing outcomes: (i) while existing literature typically indicates the presence of either CoIV=O or CoIII-O• species beyond the wall, we propose a quantum mechanical mixture of these two species (termed as CoIV=O CoIII-O•), with the per cent of mixing dictated by ligand architecture and symmetry considerations; (ii) we observe that the oxyl radical character increases beyond the wall, correlating with larger Ntrans-M-O tilt angles; and (iii) we identify an inverse relationship between the percentage of M-O• character and the kinetic barriers for C-H bond activation. These findings offer a new perspective on the roles of oxidation states, spin states, and the nature of the metal ion in reactivity.

Manganese(II) Porphyrin and Cumyl Hydroperoxide: An Efficient Catalyst for Aryl-Pentazole C-N Bond Cleavage

The selective cleavage of C-N bonds in N-containing compounds holds significant research value in organic synthesis, particularly for the synthesis of promising polynitrogen species. For instance, the discovery of the cyclo-pentazolate (cyclo-N5 -) anion in 2017 as a result of cleavage of the C-N bond has sparked interest within the field of high energy density materials. However, previous methods using ferrous glycinate and m-chloroperoxybenzoic acid generated the cyclo-N5 - anion in a low yield of 19.5 % after 24 hours, and the mechanism remained unclear. In this study, we developed an efficient catalytic system comprising Mn (II) tetraphenylporphyrin and cumyl hydroperoxide. This system enables the cyclo-N5 - anion to be produced from 3,5-dimethyl-4-hydroxyphenylpentazole in 35.4 % yield in 4 hours. Characterization of Mn(IV)-oxo porphyrins, ⋅CH3, and ⋅C8H8ON5 radicals provides evidence for the mechanism whereby the cyclo-N5 - anion forms. Our study underscores the competitive potential of radical-initiated selective C-N bonds cleavage in N-arylazoles and opens avenues for further exploration in this field.

Peroxymonosulfate promoted dioxygen activation with Mn(II)-nitrilotriacetic acid complexes for sulfadiazine degradation

In the field of peroxymonosulfate (PMS) activation technology, there is a pressing need to reduce PMS consumption and enhance its utilization rate. The present study demonstrates that the introduction of dissolved oxygen (DO) into the Mn(II)-nitrilotriacetic acid (NTA)-activated PMS system significantly enhances the degradation efficiency of sulfadiazine and increases the PMS utilization rate from approximately 15.0 to 41.3 %. Mechanistic analysis reveals that the Mn(II)-NTA/PMS system generates sulfate radicals as well as intermediate valent manganese species in the absence of DO; while in the presence of DO, Mn(II) is oxidized to Mn(III) by dioxygen to form superoxide anions and Mn(III), which can be further oxidized by PMS to higher valence states such as Mn(V) and Mn(VII). Consequently, the production of free radicals decreases while intermediate valent manganese species become more abundant. Additionally, O2•- can also reduce both Mn(VII) and Mn(IV) back to their lower oxidation state (Mn(II)). The cooperative interactions between these active species enhance the efficiency of catalytic cycles of manganese species. Moreover, the influence of multiple factors, the degradation products, and their associated toxicity assessment were investigated. Overall, this research provides valuable insights into the design of highly efficient PMS and DO activation systems.

Cascade Radical Pathway-Enabled Nitrogen-Sulfur Coupling: Access to Isothiazolo[3,4-b]-meso-tetraarylporphyrins

A catalyst-free radical-mediated domino strategy for the construction of isothiazolo[3,4-b]-meso-tetraarylporphyrins was developed. During the course of the reaction, 2-benzothioylamino-3-thioformyl-meso-tetraarylporphyrins generated in situ after the addition of Lawesson's reagent to a solution of 2-benzoylamino-3-formyl-meso-tetraarylporphyrins in refluxing toluene underwent a homolytic cleavage to produce nitrogen-sulfur radicals. Subsequently, the formation of a new N-S bond through an intramolecular cascade radical coupling provided direct access to novel β-isothiazole-fused porphyrins.

The mechanism of water oxidation using transition metal-based heterogeneous electrocatalysts

The water oxidation reaction, a crucial process for solar energy conversion, has garnered significant research attention. Achieving efficient energy conversion requires the development of cost-effective and durable water oxidation catalysts. To design effective catalysts, it is essential to have a fundamental understanding of the reaction mechanisms. This review presents a comprehensive overview of recent advancements in the understanding of the mechanisms of water oxidation using transition metal-based heterogeneous electrocatalysts, including Mn, Fe, Co, Ni, and Cu-based catalysts. It highlights the catalytic mechanisms of different transition metals and emphasizes the importance of monitoring of key intermediates to explore the reaction pathway. In addition, advanced techniques for physical characterization of water oxidation intermediates are also introduced, for the purpose of providing information for establishing reliable methodologies in water oxidation research. The study of transition metal-based water oxidation electrocatalysts is instrumental in providing novel insights into understanding both natural and artificial energy conversion processes.

Identification, Characterization, and Electronic Structures of Interconvertible Cobalt-Oxygen TAML Intermediates

The reaction of Li[(TAML)CoIII]·3H2O (TAML = tetraamido macrocyclic tetraanionic ligand) with iodosylbenzene at 253 K in acetone in the presence of redox-innocent metal ions (Sc(OTf)3 and Y(OTf)3) or triflic acid affords a blue species 1, which is converted reversibly to a green species 2 upon cooling to 193 K. The electronic structures of 1 and 2 have been determined by combining advanced spectroscopic techniques (X-band electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR), X-ray absorption spectroscopy/extended X-ray absorption fine structure (XAS/EXAFS), and magnetic circular dichroism (MCD)) with ab initio theoretical studies. Complex 1 is best represented as an S = 1/2 [(Sol)(TAML•+)CoIII---OH(LA)]- species (LA = Lewis/Brønsted acid and Sol = solvent), where an S = 1 Co(III) center is antiferromagnetically coupled to S = 1/2 TAML•+, which represents a one-electron oxidized TAML ligand. In contrast, complex 2, also with an S = 1/2 ground state, is found to be multiconfigurational with contributions of both the resonance forms [(H-TAML)CoIV═O(LA)]- and [(H-TAML•+)CoIII═O(LA)]-; H-TAML and H-TAML•+ represent the protonated forms of TAML and TAML•+ ligands, respectively. Thus, the interconversion of 1 and 2 is associated with a LA-associated tautomerization event, whereby H+ shifts from the terminal -OH group to TAML•+ with the concomitant formation of a terminal cobalt-oxo species possessing both singlet (SCo = 0) Co(III) and doublet (SCo = 1/2) Co(IV) characters. The reactivities of 1 and 2 at different temperatures have been investigated in oxygen atom transfer (OAT) and hydrogen atom transfer (HAT) reactions to compare the activation enthalpies and entropies of 1 and 2.

Enhanced Reactivities of Iron(IV)-Oxo Porphyrin Species in Oxidation Reactions Promoted by Intramolecular Hydrogen-Bonding

High-valent iron-oxo species are one of the common intermediates in both biological and biomimetic catalytic oxidation reactions. Recently, hydrogen-bonding (H-bonding) has been proved to be critical in determining the selectivity and reactivity. However, few examples have been established for mechanistic insights into the H-bonding effect. Moreover, intramolecular H-bonding effect on both C-H activation and oxygen atom transfer (OAT) reactions in synthetic porphyrin model system has not been investigated yet. In this study, a series of heme-containing iron(IV)-oxo porphyrin species with or without intramolecular H-bonding are synthesized and characterized. Kinetic studies revealed that intramolecular H-bonding can significantly enhance the reactivity of iron(IV)-oxo species in OAT, C-H activation, and electron-transfer reactions. This unprecedented unified H-bonding effect is elucidated by theoretical calculations, which showed that intramolecular H-bonding interactions lower the energy of the anti-bonding orbital of iron(IV)-oxo porphyrin species, resulting in the enhanced reactivities in oxidation reactions irrespective of the reaction type. To the best of the knowledge, this is the first extensive investigation on the intramolecular H-bonding effect in heme system. The results show that H-bonding interactions have a unified effect with iron(IV)-oxo porphyrin species in all three investigated reactions.

High-valent nonheme Fe(IV)O/Ru(IV)O complexes catalyze C-H activation reactivity and hydrogen tunneling: a comparative DFT investigation

A comprehensive density functional theory investigation has been presented towards the comparison of the C-H activation reactivity between high-valent iron-oxo and ruthenium-oxo complexes. A total of four compounds, e.g., [Ru(IV)O(tpy-dcbpy)] (1), [Fe(IV)O(tpy-dcbpy)] (1'), [Ru(IV)O(TMCS)] (2), and [Fe(IV)O(TMCS)] (2'), have been considered for this investigation. The macrocyclic ligand framework tpy(dcbpy) implies tpy = 2,2':6',2''-terpyridine, dcbpy = 5,5'-dicarboxy-2,2'-bipyridine, and TMCS is TMC with an axially tethered -SCH2CH2 group. Compounds 1 and 2' are experimentally synthesized standard complexes with Ru and Fe, whereas compounds 1' and 2 were considered to keep the macrocycle intact when switching the central metal atom. Three reactants including benzyl alcohol, ethyl benzene, and dihydroanthracene were selected as substrates for C-H activation. It is noteworthy to mention that Fe(IV)O complexes exhibit higher reactivity than those of their Ru(IV)O counterparts. Furthermore, regardless of the central metal, the complex featuring a tpy-dcbpy macrocycle demonstrates higher reactivity than that of TMCS. Here, a thorough analysis of the reactivity-controlling characteristics-such as spin state, steric factor, distortion energy, energy of the electron acceptor orbital, and quantum mechanical tunneling-was conducted. Fe(IV)O exhibits the exchanged enhanced two-state-reactivity with the quintet reactive state, whereas Ru(IV)O has only a triplet reactive state. Both the distortion energy and acceptor orbital energy are low in the case of Fe(IV)O supporting its higher reactivity. All the investigated C-H activation processes involve a significant contribution from hydrogen tunneling, which is more pronounced in the case of Ru, although it cannot alter the reactivity pattern. Furthermore, it has also been found that, independent of the central metal, aliphatic hydroxylation is always preferable to aromatic hydroxylation. Overall, this work is successful in establishing and investigating the cause of enzymes' natural preference for Fe over Ru as a cofactor for C-H activation enzymes.

Mn(II) Polypyridyl Complexes: Precursors to High Valent Mn(V)=O Species and Inhibitors of Cancer Cell Proliferation

The reaction of [(L)MnII ]2+ (L = neutral polypyridine ligand framework) in the presence of mCPBA (mCPBA = m-Chloroperoxybenzoic acid) generates a putative MnV =O species at RT. The proposed MnV =O species is capable of performing the aromatic hydroxylation of Cl-benzoic acid derived from mCPBA to give [(L)MnIII (m-Cl-salicylate)]+ , which in the presence of excess mCPBA generates a metastable [(L)MnV (O)(m-Cl-salicylate)]+ , characterized by UV/Vis absorption, EPR, resonance Raman spectroscopy, and ESI-MS studies. The current study highlights the fact that [(L)MnIII (m-Cl-salicylate)]+ formation may not be a dead end for catalysis. Further, a plausible mechanism has been proposed for the formation of [(L)MnV (O)-m-Cl-salicylate)]+ from [(L)MnIII (m-Cl-salicylate)]+ . The characterized transient [(L)MnV (O)-m-Cl-salicylate)]+ reported in the current work exhibits high reactivity for oxygen atom transfer reactions, supported by the electrophilic character depicted from Hammett studies using a series of para-substituted thioanisoles. The unprecedented study starting from a non-heme neutral polypyridine ligand framework paves a path for mimicking the natural active site of photosystem II under ambient conditions. Finally, evaluating the intracellular effect of Mn(II) complexes revealed an enhanced intracellular ROS and mitochondrial dysfunction to prevent the proliferation of hepatocellular carcinoma and breast cancer cells.

Single-Atom MnN5 Catalytic Sites Enable Efficient Peroxymonosulfate Activation by Forming Highly Reactive Mn(IV)-Oxo Species

Four-nitrogen-coordinated transitional metal (MN₄) configurations in single-atom catalysts (SACs) are broadly recognized as the most efficient active sites in peroxymonosulfate (PMS)-based advanced oxidation processes. However, SACs with a coordination number higher than four are rarely explored, which represents a fundamental missed opportunity for coordination chemistry to boost PMS activation and degradation of recalcitrant organic pollutants. We experimentally and theoretically demonstrate here that five-nitrogen-coordinated Mn (MnN₅) sites more effectively activate PMS than MnN₄ sites, by facilitating the cleavage of the O-O bond into high-valent Mn(IV)-oxo species with nearly 100% selectivity. The high activity of MnN₅ was discerned to be due to the formation of higher-spin-state N₅Mn(IV)═O species, which enable efficient two-electron transfer from organics to Mn sites through a lower-energy-barrier pathway. Overall, this work demonstrates the importance of high coordination numbers in SACs for efficient PMS activation and informs the design of next-generation environmental catalysts.

Manganese(III) porphyrin-catalyzed regioselective dual functionalization of C(sp3)-H bonds: the transformation of arylalkanes to 1,4-diketones

The first, direct way from arylalkanes to 1,4-dicarbonyl compounds has been shown. It makes obtaining these useful products more accessible and cheaper. Our method is based on a one-pot reaction with excellent regioselectivity, mild conditions, and water as the main solvent. A plausible reaction mechanism has also been proposed.

Structure and Reactivity of Nonporphyrinic Terminal Manganese(IV)-Hydroxide Complexes in the Oxidative Electrophilic Reaction

High-valent transition metal-hydroxide complexes have been proposed as essential intermediates in biological and synthetic catalytic reactions. In this work, we report the single-crystal X-ray structure and spectroscopic characteristics of a mononuclear nonporphyrinic Mn^IV-(OH) complex, [Mn^IV(Me₃-TPADP)(OH)(OCH₂CH₃)]²⁺ (2), using various physicochemical methods. Likewise, [Mn^IV(Me₃-TPADP)(OH)(OCH₂CF₃)]²⁺ (3), which is thermally stable at room temperature, was also synthesized and characterized spectroscopically. The Mn^IV-(OH) adducts are capable of performing oxidation reactions with external organic substrates such as C-H bond activation, sulfoxidation, and epoxidation. Kinetic studies, involving the Hammett correlation and kinetic isotope effect, and product analyses indicate that 2 and 3 exhibit electrophilic oxidative reactivity toward hydrocarbons. Density functional theory calculations support the assigned electronic structure and show that direct C-H bond activation of the Mn^IV-(OH) species is indeed possible.

Dioxygen Reactivity of Copper(I)/Manganese(II)-Porphyrin Assemblies: Mechanistic Studies and Cooperative Activation of O2

The oxidation of transition metals such as manganese and copper by dioxygen (O₂) is of great interest to chemists and biochemists for fundamental and practical reasons. In this report, the O₂ reactivities of 1:1 and 1:2 mixtures of [(TPP)Mn^II] (1; TPP: Tetraphenylporphyrin) and [(tmpa)Cu^I(MeCN)]⁺ (2; TMPA: Tris(2-pyridylmethyl)amine) in 2-methyltetrahydrofuran (MeTHF) are described. Variable-temperature (-110 °C to room temperature) absorption spectroscopic measurements support that, at low temperature, oxygenation of the (TPP)Mn/Cu mixtures leads to rapid formation of a cupric superoxo intermediate, [(tmpa)Cu^II(O₂^•-)]⁺ (3), independent of the presence of the manganese porphyrin complex (1). Complex 3 subsequently reacts with 1 to form a heterobinuclear μ-peroxo species, [(tmpa)Cu^II-(O₂^2-)-Mn^III(TPP)]⁺ (4; λ_max = 443 nm), which thermally converts to a μ-oxo complex, [(tmpa)Cu^II-O-Mn^III(TPP)]⁺ (5; λ_max = 434 and 466 nm), confirmed by electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. In the 1:2 (TPP)Mn/Cu mixture, 4 is subsequently attacked by a second equivalent of 3, giving a bis-μ-peroxo species, i.e., [(tmpa)Cu^II-(O₂^2-)-Mn^IV(TPP)-(O₂^2-)-Cu^II(tmpa)]²⁺ (7; λ_max = 420 nm and δ_pyrrolic = -44.90 ppm). The final decomposition product of the (TPP)Mn/Cu/O₂ chemistry in MeTHF is [(TPP)Mn^III(MeTHF)₂]⁺ (6), whose X-ray structure is also presented and compared to literature analogs.

Oxidative versus basic asynchronous hydrogen atom transfer reactions of Mn(III)-hydroxo and Mn(III)-aqua complexes

Hydrogen atom transfer (HAT) of metal-oxygen intermediates such as metal-oxo, -hydroxo and -superoxo species have so far been studied extensively. However, HAT reactions of metal-aqua complexes have yet to be...

Halogen Transfer to Carbon Radicals by High-Valent Iron Chloride and Iron Fluoride Corroles

High-valent iron halide corroles were examined to determine their reactivity with carbon radicals and their ability to undergo radical rebound-like processes. Beginning with Fe(Cl)(ttppc) (1) (ttppc = 5,10,15-tris(2,4,6-triphenylphenyl)corrolato^3-), the new iron corroles Fe(OTf)(ttppc) (2), Fe(OTf)(ttppc)(AgOTf) (3), and Fe(F)(ttppc) (4) were synthesized. Complexes 3 and 4 are the first iron triflate and iron fluoride corroles to be structurally characterized by single crystal X-ray diffraction. The structure of 3 reveals an Ag^I-pyrrole (η²-π) interaction. The Fe(Cl)(ttppc) and Fe(F)(ttppc) complexes undergo halogen transfer to triarylmethyl radicals, and kinetic analysis of the reaction between (p-OMe-C₆H₄)₃C• and 1 gave k = 1.34(3) × 10³ M^-1 s^-1 at 23 °C and 2.2(2) M^-1 s^-1 at -60 °C, ΔH^⧧ = +9.8(3) kcal mol^-1, and ΔS^⧧ = -14(1) cal mol^-1 K^-1 through an Eyring analysis. Complex 4 is significantly more reactive, giving k = 1.16(6) × 10⁵ M^-1 s^-1 at 23 °C. The data point to a concerted mechanism and show the trend X = F^- > Cl^- > OH^- for Fe(X)(ttppc). This study provides mechanistic insights into halogen rebound for an iron porphyrinoid complex.

Deeper Understanding of Mononuclear Manganese(IV)-Oxo Binding Brønsted and Lewis Acids and the Manganese(IV)-Hydroxide Complex

Binding of Lewis acidic metal ions and Brønsted acid at the metal-oxo group of high-valent metal-oxo complexes enhances their reactivities significantly in oxidation reactions. However, such a binding of Lewis acids and proton at the metal-oxo group has been questioned in several cases and remains to be clarified. Herein, we report the synthesis, characterization, and reactivity studies of a mononuclear manganese(IV)-oxo complex binding triflic acid, {[(dpaq)Mn^IV(O)]-HOTf}⁺ (1-HOTf). First, 1-HOTf was synthesized and characterized using various spectroscopic techniques, including resonance Raman (rRaman) and X-ray absorption spectroscopy/extended X-ray absorption fine structure. In particular, in rRaman experiments, we observed a linear correlation between the Mn-O stretching frequencies of 1-HOTf (e.g., ν_Mn-O at ∼793 cm^-1) and 1-Mⁿ⁺ (Mⁿ⁺ = Ca²⁺, Zn²⁺, Lu³⁺, Al³⁺, or Sc³⁺) and the Lewis acidities of H⁺ and Mⁿ⁺ ions, suggesting that H⁺ and Mⁿ⁺ bind at the metal-oxo moiety of [(dpaq)Mn^IV(O)]⁺. Interestingly, a single-crystal structure of 1-HOTf was obtained by X-ray diffraction analysis, but the structure was not an expected Mn(IV)-oxo complex but a Mn(IV)-hydroxide complex, [(dpaq)Mn^IV(OH)](OTf)₂ (4), with a Mn-O bond distance of 1.8043(19) Å and a Mn-O stretch at 660 cm^-1. More interestingly, 4 reverted to 1-HOTf upon dissolution, demonstrating that 1-HOTf and 4 are interconvertible depending on the physical states, such as 1-HOTf in solution and 4 in isolated solid. The reactivity of 1-HOTf was investigated in hydrogen atom transfer (HAT) and oxygen atom transfer (OAT) reactions and then compared with those of 1-Mⁿ⁺ complexes; an interesting correlation between the Mn-O stretching frequencies of 1-HOTf and 1-Mⁿ⁺ and their reactivities in the OAT and HAT reactions is reported for the first time in this study.

Enthalpy-Entropy Compensation Effect in Oxidation Reactions by Manganese(IV)-Oxo Porphyrins and Nonheme Iron(IV)-Oxo Models

"Enthalpy-Entropy Compensation Effect" (EECE) is ubiquitous in chemical reactions; however, such an EECE has been rarely explored in biomimetic oxidation reactions. In this study, six manganese(IV)-oxo complexes bearing electron-rich and -deficient porphyrins are synthesized and investigated in various oxidation reactions, such as hydrogen atom transfer (HAT), oxygen atom transfer (OAT), and electron-transfer (ET) reactions. First, all of the six Mn(IV)-oxo porphyrins are highly reactive in the HAT, OAT, and ET reactions. Interestingly, we have observed a reversed reactivity in the HAT and OAT reactions by the electron-rich and -deficient Mn(IV)-oxo porphyrins, depending on reaction temperatures, but not in the ET reactions; the electron-rich Mn(IV)-oxo porphyrins are more reactive than the electron-deficient Mn(IV)-oxo porphyrins at high temperature (e.g., 0 °C), whereas at low temperature (e.g., -60 °C), the electron-deficient Mn(IV)-oxo porphyrins are more reactive than the electron-rich Mn(IV)-oxo porphyrins. Such a reversed reactivity between the electron-rich and -deficient Mn(IV)-oxo porphyrins depending on reaction temperatures is rationalized with EECE; that is, the lower is the activation enthalpy, the more negative is the activation entropy, and vice versa. Interestingly, a unified linear correlation between the activation enthalpies and the activation entropies is observed in the HAT and OAT reactions of the Mn(IV)-oxo porphyrins. Moreover, from the previously reported HAT reactions of nonheme Fe(IV)-oxo complexes, a linear correlation between the activation enthalpies and the activation entropies is also observed. To the best of our knowledge, we report the first detailed mechanistic study of EECE in the oxidation reactions by synthetic high-valent metal-oxo complexes.

Identifying Intermediates in Electrocatalytic Water Oxidation with a Manganese Corrole Complex

Water nucleophilic attack (WNA) on high-valent terminal Mn-oxo species is proposed for O-O bond formation in natural and artificial water oxidation. Herein, we report an electrocatalytic water oxidation reaction with Mn^III tris(pentafluorophenyl)corrole (1) in propylene carbonate (PC). O₂ was generated at the Mn^V/IV potential with hydroxide, but a more anodic potential was required to evolve O₂ with only water. With a synthetic Mn^V(O) complex of 1, a second-order rate constant, k₂(OH^-), of 7.4 × 10³ M^-1 s^-1 was determined in the reaction of the Mn^V(O) complex of 1 with hydroxide, whereas its reaction with water occurred much more slowly with a k₂(H₂O) value of 4.4 × 10^-3 M^-1 s^-1. This large reactivity difference of Mn^V(O) with hydroxide and water is consistent with different electrocatalytic behaviors of 1 with these two substrates. Significantly, during the electrolysis of 1 with water, a Mn^IV-peroxo species was identified with various spectroscopic methods, including UV-vis, electron paramagnetic resonance, and infrared spectroscopy. Isotope-labeling experiments confirmed that both O atoms of this peroxo species are derived from water, suggesting the involvement of the WNA mechanism in water oxidation by a Mn complex. Density functional theory calculations suggested that the nucleophilic attack of hydroxide on Mn^V(O) and also WNA to 1e^--oxidized Mn^V(O) are feasibly involved in the catalytic cycles but that direct WNA to Mn^V(O) is not likely to be the main O-O bond formation pathway in the electrocatalytic water oxidation by 1.

Enzyme Mimic Facilitated Artificial Cell to Mammalian Cell Signal Transfer

Catalyzing biochemical reactions with enzymes and communicating with neighboring cells via chemical signaling are two fundamental cellular features that play a critical role in maintaining the homeostasis of organisms. Herein, we present an artificial enzyme (AE) facilitated signal transfer between artificial cells (ACs) and mammalian HepG2 cells. We synthesize metalloporphyrins (MPs) based AEs that mimic cytochrome P450 enzymes (CYPs) to catalyze a dealkylation and a hydroxylation reaction, exemplified by the conversion of resorufin ethyl ether (REE) to resorufin and coumarin (COU) to 7-hydroxycoumarin (7-HC), respectively. The AEs are immobilized in hydrogels to produce ACs that generate the two diffusive fluorophores, which can diffuse into HepG2 cells and result in dual intracellular emissions. This work highlights the use of AEs to promote AC to mammalian signal transfer, which opens up new opportunities for integrating the synthetic and living world with a bottom-up strategy.

Oxidative Cleavage of Alkenes by O2 with a Non-Heme Manganese Catalyst

The oxidative cleavage of C=C double bonds with molecular oxygen to produce carbonyl compounds is an important transformation in chemical and pharmaceutical synthesis. In nature, enzymes containing the first-row transition metals, particularly heme and non-heme iron-dependent enzymes, readily activate O₂ and oxidatively cleave C=C bonds with exquisite precision under ambient conditions. The reaction remains challenging for synthetic chemists, however. There are only a small number of known synthetic metal catalysts that allow for the oxidative cleavage of alkenes at an atmospheric pressure of O₂, with very few known to catalyze the cleavage of nonactivated alkenes. In this work, we describe a light-driven, Mn-catalyzed protocol for the selective oxidation of alkenes to carbonyls under 1 atm of O₂. For the first time, aromatic as well as various nonactivated aliphatic alkenes could be oxidized to afford ketones and aldehydes under clean, mild conditions with a first row, biorelevant metal catalyst. Moreover, the protocol shows a very good functional group tolerance. Mechanistic investigation suggests that Mn–oxo species, including an asymmetric, mixed-valent bis(μ-oxo)-Mn(III,IV) complex, are involved in the oxidation, and the solvent methanol participates in O₂ activation that leads to the formation of the oxo species.

Ligand-Controlled Csp2-H versus Csp3-H Bond Formation in Cycloplatinated Complexes: A Joint Experimental and Theoretical Mechanistic Investigation

The cyclometalated platinum(II) complexes [PtMe(C^∧N)(L)] [1_PS: C^∧N = 2-phenylpyridinate (ppy), L = SMe₂; 1_BS: C^∧N = benzo[h]quinolate (bhq), L = SMe₂; 1_PP: C^∧N = ppy, L = PPh₃; and 1_BP: C^∧N = bhq, L = PPh₃] containing two different cyclometalated ligands and two different ancillary ligands have been investigated in the reaction with CX₃CO₂H (X = F or H). When L = SMe₂, the Pt-Me bond rather than the Pt-C bond of the cycloplatinated complex is cleaved to give the complexes [Pt(C^∧N)(CX₃CO₂)(SMe₂)]. When L = PPh₃, the selectivity of the reaction is reversed. In the reaction of [PtMe(C^∧N)(PPh₃)] with CF₃CO₂H, the Pt-C^∧N bond is cleaved rather than the Pt-Me bond. The latter reaction gave [PtMe(κ¹N-Hppy)(PPh₃)(CF₃CO₂)] as an equilibrium mixture of two isomers. For L = PPh₃, no reaction was observed with CH₃CO₂H. The reasons for this difference in selectivity for complexes 1 are computationally discussed based on the energy barrier needed for the protonolysis of the Pt-C_sp³ bond versus the Pt-C_sp² bond. Two pathways including the direct one-step acid attack at the Pt-C bond (S_E2) and stepwise oxidative-addition on the Pt(II) center followed by reductive elimination [S_E(ox)] are proposed. A detailed density functional theory (DFT) study of these protonations along with experimental UV-vis kinetics suggests that a one-step electrophilic attack (S_E2) at the Pt-C bond is the most likely mechanism for complexes 1, and changing the nature of the ancillary ligand can influence the selectivity in the Pt-C bond cleavage. The effect of the nature of the acid and cyclometalated ligand (C^∧N) is also discussed.

Capturing Manganese Oxide Intermediates in Electrochemical Water Oxidation at Neutral pH by In Situ Raman Spectroscopy

Electrochemical water splitting is a promising means to produce eco-friendly hydrogen fuels. Inspired by the Mn₄ CaO₅ cluster in nature, substantial works have been performed to develop efficient manganese (Mn)-based heterogeneous catalysts. Despite improvements in catalytic activity, the underlying mechanism of the oxygen evolution reaction (OER) is not completely elucidated owing to the lack of direct spectroscopic evidence for the active Mn-oxo moieties. We identify water oxidation intermediates on the surface of Mn₃ O₄ nanoparticles (NPs) in the OER at neutral pH by in situ Raman spectroscopy. A potential-dependent Raman peak was detected at 760 cm^-1 and assigned to the active Mn^IV =O species generated during water oxidation. Isotope-labeling experiments combined with scavenger experiments confirmed the generation of surface terminal Mn^IV =O intermediates in the Mn-oxide NPs. This study provides an insight into the design of systems for the observation of reaction intermediates.

Mangana(iii/iv)electro-catalyzed C(sp3)-H azidation

Manganaelectro-catalyzed azidation of otherwise inert C(sp3)-H bonds was accomplished using most user-friendly sodium azide as the nitrogen-source. The operationally simple, resource-economic C-H azidation strategy was characterized by mild reaction conditions, no directing group, traceless electrons as the sole redox-reagent, Earth-abundant manganese as the catalyst, high functional-group compatibility and high chemoselectivity, setting the stage for late-stage azidation of bioactive compounds. Detailed mechanistic studies by experiment, spectrophotometry and cyclic voltammetry provided strong support for metal-catalyzed aliphatic radical formation, along with subsequent azidyl radical transfer within a manganese(iii/iv) manifold.

Computational Studies on the Mechanism and Origin of the Different Regioselectivities of Manganese Porphyrin-Catalyzed C-H Bond Hydroxylation and Amidation of Equilenin Acetate

The manganese porphyrin-catalyzed C-H bond hydroxylation and amidation of equilenin acetate developed by Breslow and his co-worker have been investigated with density functional theory (DFT) calculations. The hydroxylation of C(sp²)-H bond of equilenin acetate leading to the 6-hydroxylated product is more favorable than the hydroxylation of C(sp³)-H bond of equilenin acetate, leading to the 11β-hydroxylation product. The computational results suggest that the C(sp²)-H bond hydroxylation of equilenin acetate undergoes an oxygen-atom-transfer mechanism, which is more favorable than the C(sp³)-H bond hydroxylation undergoing the hydrogen-atom-abstraction/oxygen-rebound (HAA/OR) mechanism by 1.6 kcal/mol. That is why, the 6-hydroxylated product is the major product and the 11β-hydroxylated product is the minor product. In contrast, the 11β-amidated product is the only observed product in manganese porphyrin-catalyzed amidation reaction. The benzylic amidation undergoes a hydrogen-atom-abstraction/nitrogen-rebound (HAA/NR) mechanism, in which hydrogen atom abstraction is followed by nitrogen rebound, leading to the 11β-amidated product. The benzylic C(sp³)-H bond amidation at the C-11 position is more favorable than aromatic amidation at the C-6 position by 4.9 kcal/mol. Therefore, the DFT computational results are consistent with the experiments that manganese porphyrin-catalyzed C-H bond hydroxylation and amidation of equilenin acetate have different regioselectivities.

Unprecedented Reactivities of Highly Reactive Manganese(III)-Iodosylarene Porphyrins in Oxidation Reactions

We report that Mn(III)-iodosylarene porphyrins, [Mn^III(Porp)(^sArIO)]⁺, are capable of activating the C-H bonds of hydrocarbons, including unactivated alkanes such as cyclohexane, with unprecedented reactivities, such as a low kinetic isotope effect, a saturation behavior of reaction rates, and no electronic effect of porphyrin ligands on the reactivities of [Mn^III(Porp)(^sArIO)]⁺. In oxygen atom transfer (OAT) reactions, the sulfoxidation of para-X-substituted thioanisoles by [Mn^III(Porp)(^sArIO)]⁺ affords a very unusual behavior in the Hammett plot with the saturation behavior of reaction rates and no electronic effect of porphyrin ligands on reactivities. The reactivities and mechanisms of [Mn^III(Porp)(^sArIO)]⁺ are then compared with those of the corresponding Mn^IV(Porp)(O) complex. The present study reports the first example of highly reactive Mn(III)-iodosylarene porphyrins with unprecedented reactivities in C-H bond activation and OAT reactions.

Iron(III) 5,15-Diazaporphyrin Catalysts for the Direct Oxidation of C(sp3)-H Bonds

5,15-Diazaporphyrins are porphyrin analogues with imine-type sp²-hybridized nitrogen atoms at the meso-positions. Even though these compounds are more electron-deficient than regular porphyrins, the use of iron diazaporphyrins as catalysts has not been reported. Herein, we disclose the synthesis, structure, and electronic properties of iron(III) 5,15-diazaporphyrins. We evaluate their structures and electronic natures by X-ray analysis and electrochemical analyses. We also demonstrate that chloroiron(III) 5,15-diazaporphyrins exhibit high catalytic activity in the direct oxidation of alkanes due to their intrinsic electron-deficient nature. On the basis of stoichiometric reactions of iron(III) diazaporphyrin with iodosylbenzene as an oxidant, it was possible to demonstrate the existence of an iodosylbenzene-iron diazaporphyrin adduct reaction intermediate that serves as a reservoir to generate oxo-iron species.

Direct C-H bond halogenation and pseudohalogenation of hydrocarbons mediated by high-valent 3d metal-oxo species

Late-stage direct functionalization of the C-H bond is synthetically desirable. Metalloenzymes having metal-oxo active sites are well known to selectively catalyze hydroxylation and halogenation reactions with high efficiency. This review highlights the recent developments in the field of direct C-H halogenation and pseudohalogenation reactions catalyzed by the functional models of metalloenzymes.

Spectroscopic capture of a low-spin Mn(IV)-oxo species in Ni-Mn3O4 nanoparticles during water oxidation catalysis

High-valent metal-oxo moieties have been implicated as key intermediates preceding various oxidation processes. The critical O-O bond formation step in the Kok cycle that is presumed to generate molecular oxygen occurs through the high-valent Mn-oxo species of the water oxidation complex, i.e., the Mn4Ca cluster in photosystem II. Here, we report the spectroscopic characterization of new intermediates during the water oxidation reaction of manganese-based heterogeneous catalysts and assign them as low-spin Mn(IV)-oxo species. Recently, the effects of the spin state in transition metal catalysts on catalytic reactivity have been intensely studied; however, no detailed characterization of a low-spin Mn(IV)-oxo intermediate species currently exists. We demonstrate that a low-spin configuration of Mn(IV), S = 1/2, is stably present in a heterogeneous electrocatalyst of Ni-doped monodisperse 10-nm Mn3O4 nanoparticles via oxo-ligand field engineering. An unprecedented signal (g = 1.83) is found to evolve in the electron paramagnetic resonance spectrum during the stepwise transition from the Jahn-Teller-distorted Mn(III). In-situ Raman analysis directly provides the evidence for Mn(IV)-oxo species as the active intermediate species. Computational analysis confirmed that the substituted nickel species induces the formation of a z-axis-compressed octahedral C4v crystal field that stabilizes the low-spin Mn(IV)-oxo intermediates.

Visible light generation of high-valent metal-oxo intermediates and mechanistic insights into catalytic oxidations

High-valent metal-oxo complexes play central roles as active oxygen atom transfer (OAT) agents in many enzymatic and synthetic oxidation catalysis. This review focuses on our recent advances in application of photochemical approaches to probe the oxidizing metal-oxo species with different metals and macrocyclic ligands. Under visible light irradiation, a variety of important metal-oxo species including iron-oxo porphyrins, manganese-oxo porphyrin/corroles, ruthenium-oxo porphyrins, and chromium-oxo salens have been successfully generated. Kinetical studies in real time have provided mechanistic insights as to the reactivity and reaction pathways of the metal-oxo intermediates in their oxidation reactions. In photo-induced ligand cleavage reactions, metals in n⁺ oxidation state with the oxygen-containing ligands bromate, chlorate, or nitrites were photolyzed. Homolytic cleavage of the O-X bond in the ligand gives (n + 1)⁺ oxidation state metal-oxo species, and heterolytic cleavage gives (n + 2)⁺ oxidation state metal-oxo species. In photo-disproportionation reactions, reactive Mⁿ⁺¹-oxo species can be formed by photolysis of μ-oxo dimeric Mⁿ⁺ complexes with the concomitant formation of M^n-1 products. Importantly, the oxidation of M^n-1 products by molecular oxygen (O₂) to regenerate the μ-oxo dimeric Mⁿ⁺ complexes in photo-disproportionation reactions represents an attractive and green catalytic cycle for the development of photocatalytic aerobic oxidations.

Hydroxyl Transfer to Carbon Radicals by Mn(OH) vs Fe(OH) Corrole Complexes

The transfer of •OH from metal-hydroxo species to carbon radicals (R•) to give hydroxylated products (ROH) is a fundamental process in metal-mediated heme and nonheme C-H bond oxidations. This step, often referred to as the hydroxyl "rebound" step, is typically very fast, making direct study of this process challenging if not impossible. In this report, we describe the reactions of the synthetic models M(OH)(ttppc) (M = Fe (1), Mn (3); ttppc = 5,10,15-tris(2,4,6-triphenyl)phenyl corrolato^3-) with a series of triphenylmethyl carbon radical (R•) derivatives ((4-X-C₆H₄)₃C•; X = OMe, tBu, Ph, Cl, CN) to give the one-electron reduced M^III(ttppc) complexes and ROH products. Rate constants for 3 for the different radicals ranged from 11.4(1) to 58.4(2) M^-1 s^-1, as compared to those for 1, which fall between 0.74(2) and 357(4) M^-1 s^-1. Linear correlations for Hammett and Marcus plots for both Mn and Fe were observed, and the small magnitudes of the slopes for both correlations imply a concerted •OH transfer reaction for both metals. Eyring analyses of reactions for 1 and 3 with (4-X-C₆H₄)₃C• (X = tBu, CN) also give good linear correlations, and a comparison of the resulting activation parameters highlight the importance of entropy in these •OH transfer reactions. Density functional theory calculations of the reaction profiles show a concerted process with one transition state for all radicals investigated and help to explain the electronic features of the OH rebound process.

Enantioselective oxygenation of exocyclic methylene groups by a manganese porphyrin catalyst with a chiral recognition site

The natural enzyme cytochrome P450 is widely recognised for its unique ability to catalyse highly selective oxygen insertion reactions into unactivated C–H bonds under mild conditions. Its exceptional potential for organic synthesis served as an inspiration for the presented biomimetic hydroxylation approach. Via a remote hydrogen bonding motif a high enantioselectivity in the manganese-catalysed oxygenation of quinolone analogues (27 examples, 18–64% yield, 80–99% ee) was achieved. The site-selectivity was completely altered in favour of a less reactive but more accessible position.

A Mn porphyrin complex with a remote hydrogen bonding motif induces a high enantioselectivity in the oxygenation of 3-alkylquinolones. Compared to an achiral Mn complex, the site-selectivity was completely altered in favour of less reactive methylene groups.

Ionic liquid-stabilized vanadium oxo-clusters catalyzing alkane oxidation by regulating oligovanadates

The specific ionic liquid [TBA][Pic]-stabilized vanadium oxo-clusters exist in the form of a trimer and a dimer and are highly active for catalyzing C–H bond oxidation with H₂O₂ as an oxidant.

Formation and kinetic studies of manganese(IV)-oxo porphyrins: Oxygen atom transfer mechanism of sulfide oxidations

Visible light irradiation of photo-labile porphyrin-manganese(III) chlorates or bromates (2) produced manganese(IV)-oxo porphyrins [Mn^IV(Por)(O)] (Por = porphyrin) (3) in three porphyrin ligands. The same oxo species 3 were also formed by chemical oxidation of the corresponding manganese(III) precursors (1) with iodobenzene diacetate, i.e. PhI(OAc)₂. The systems under study include 5,10,15,20-tetra(pentafluorophenyl)porphyrin‑manganese(IV)-oxo (3a), 5,10,15,20-tetra(2,6-difluorophenyl)porphyrin‑manganese(IV)-oxo (3b), and 5,10,15,20-tetramesitylporphyrin‑manganese(IV)-oxo (3c). As expected, complexes 3 reacted with thioanisoles to produce the corresponding sulfoxides and over-oxidized sulfones. The kinetics of oxygen atom transfer (OAT) reactions of these generated 3 with aryl sulfides were studied in CH₃CN solutions. Second-order rate constants for sulfide oxidation reactions are comparable to those of alkene epoxidations and activated CH bond oxidations by the same oxo species 3. For a given substrate, the reactivity order for the manganese(IV)-oxo species was 3a > 3b > 3c, consistent with expectations on the basis of the electron-withdrawing capacity of the porphyrin macrocycles. Free-energy Hammett analyses gave near-linear correlations with σ values, indicating no significant positive charge developed at the sulfur during the oxidation process. The mechanistic results strongly suggest [Mn^IV(Por)(O)] reacts as a direct OAT agent towards sulfide substrates through a manganese(II) intermediate that was detected in this work. However, an alternative pathway that involves a disproportionation of 3 to form a higher oxidized manganese(V)-oxo species may be significant when less reactive substrates are present. The competition product studies with the Hammett correlation plot confirmed that the observed manganese(IV)-oxo species is not the true oxidant for the sulfide oxidations catalyzed by manganese(III) porphyrins with PhI(OAc)₂.

A High-Valent Manganese(IV)-Oxo-Cerium(IV) Complex and Its Enhanced Oxidizing Reactivity

A mononuclear nonheme manganese(IV)-oxo complex binding the Ce⁴⁺ ion, [(dpaq)Mn^IV (O)]⁺ -Ce⁴⁺ (1-Ce⁴⁺ ), was synthesized by reacting [(dpaq)Mn^III (OH)]⁺ (2) with cerium ammonium nitrate (CAN). 1-Ce⁴⁺ was characterized using various spectroscopic techniques, such as UV/Vis, EPR, CSI-MS, resonance Raman, XANES, and EXAFS, showing an Mn-O bond distance of 1.69 Å with a resonance Raman band at 675 cm^-1 . Electron-transfer and oxygen atom transfer reactivities of 1-Ce⁴⁺ were found to be greater than those of Mn^IV (O) intermediates binding redox-inactive metal ions (1-Mⁿ⁺ ). This study reports the first example of a redox-active Ce⁴⁺ ion-bound Mn^IV -oxo complex and its spectroscopic characterization and chemical properties.