Metal–Organic Framework-Derived Guerbet Catalyst Effectively Differentiates between Ethanol and Butanol

Ligand-Shell Cooperativity in a Bilayer Silica-Sandwiched Mixed-Metals Nanocatalyst Design for Absolute Selectivity Switch

Unlike homogeneous metal complexes, achieving absolute control over reaction selectivity in heterogeneous catalysts remains a formidable challenge due to the unguided molecular adsorption/desorption on metal-surface sites. Conventional organic surface modifiers or ligands and rigid inorganic and metal-organic porous shells are not fully effective. Here, we introduce the concept of "ligand-porous shell cooperativity" to desirably switch reaction selectivity in heterogeneous catalysis. We present a nanocatalyst design strategy consisting of bilayer silica-sandwiched 2D mixed metal islands. The intimate 2D/2D nanoscale interfacing between porous silica layers and flat island-like mixed-metal sites, combined with organic ligands, creates a nanoconfined microenvironment that enables reliable control of molecular orientation-dependent reactivity, affording the desired product in 100% selectivity. This design simultaneously leverages the hydrophobicity and flexibility of organic ligands and the nanoscale geometric rigidity of the pores inside the inorganic silica shell. Our strategy is effective with simple amorphous silica, random Cu-alloy, and commonly used metal-coordinating ligands. We demonstrate the applicability in industrially significant reactions: selective hydrogenation of alkynes, α,β-unsaturated esters/aldehydes, and nitroarenes. Our findings offer the valuable scope of a multicomponent compact nanoscale design strategy in next-generation switchable, sustainable, and recyclable catalysis.

Value-added bioproducts by bioethanol dehydrogenation to acetaldehyde through Cu and Zn modified biochar catalysts

In this study, the efficiency of a series of biochar-supported Cu catalysts, biochar-supported Zn catalysts, and biochar-supported Cu-Zn catalysts was determined through bioethanol dehydrogenation to the high-value chemical, acetaldehyde. Each metal, with weight percentages of 10, 20, and 30, and the combination of Cu-Zn, including 10 wt% of Cu and Zn, 15 wt% of Cu - 5 wt% of Zn, and 15 wt% of Cu and Zn, were fully loaded onto biochar using an incipient wetness impregnation technique. Subsequently, all biocatalysts were subjected to bioethanol dehydrogenation reactions in a temperature range of 200-400 °C. The optimum metal loading for the catalyst was found to be the combination of 15 wt% Cu and 15 wt% Zn. This catalyst resulted in a reasonable acetaldehyde yield of 56.2%, an initial bioethanol conversion of 57.3%, and a very high acetaldehyde selectivity of 98.1% at a mild reaction temperature of 300 °C and ambient pressure. These results were attributed to the optimal concentration of weak-medium acid and medium base sites. Active acid and base sites were identified through temperature-programmed desorption of ammonia (NH3-TPD) and temperature-programmed desorption of carbon dioxide (CO2-TPD), respectively. Furthermore, the reaction stability test of the best biocatalyst (15Cu-15Zn/BB) was proven by maintaining this reaction at the same temperature (300 °C) for 10 h. However, the catalytic performance slightly decreased due to the coke formation of Cu species.

Platform for the Immobilizing of Ultrasmall Pd Clusters for Carbonylation: In Situ Self-Templating Fabrication of ZIF-8 on ZnO

Incorporating metal clusters into the confined cavities of metal-organic frameworks (MOFs) to form MOF-supported catalysts has attracted considerable research interest with regard to carbonylation reactions. Herein, a self-templating method is used to prepare the zinc oxide (ZnO)-supported core-shell catalyst ZnO@Pd/ZIF-8. This facile strategy controls the growth of metal sources on the ZIF-8 shell layer and avoids the metal diffusion or aggregation problems of the conventional synthesis method. The characteristics of the catalysts show that the palladium (Pd) clusters are highly dispersed with an average particle size of ≈1.2 nm, making them excellent candidates as a catalyst for carbonylation under mild conditions. The optimal catalyst (1.25-ZnO@Pd/ZIF-8) exhibits excellent activity in synthesizing α, β-alkynyl ketones under 1 atm of carbon monooxide (CO), and the conversion rate of 1, 3-diphenylprop-2-yn-1-one is 3.09 and 3.87 times more than those of Pd/ZIF-8 and Pd2+, respectively, for the first 2 h. Moreover, the 1.25-ZnO@Pd/ZIF-8 is recyclable, showing negligible metal leaching, and, under the conditions used in this investigation, can be reused at least five times without considerable loss in its catalytic efficiency. This protocol can also be applied with other nucleophile reagents to synthesize esters, amides, and acid products.

Cu2+@metal-organic framework-derived amphiphilic sandwich catalysts for enhanced hydrogenation selectivity of ketenes at the oil-water interface

Selective catalysis has always been an essential process for manufacturing various fine chemicals, such as food additives, pharmaceuticals and perfumes. Practically, pure target products are difficult to obtain even after complex purification procedures during industrial production. The development of a cost-effective, highly chemoselective and long-life catalyst may be an attractive solution, but such a catalyst is elusive. Herein, a novel class of amphiphilic N-doped carbon (NC), featuring graphitic carbon (GC) and highly dispersed Cu@Co NPs, was fabricated via simple calcination of a Cu2+-doped bimetallic metal-organic framework (MOF) precusor directly. Compared with monometallic Co@GC/NC, the side reaction of CO bond hydrogenation is obviously restrained, and thus, pure target product can be systematically obtained by Cu@Co@GC/NC, highlighting the high selectivity of Cu. More importantly, an amphiphilic characteristic in Cu@Co@GC/NC is a significant knob to integrate organic substrates with water very well. This amphiphilic material shows great potential as a field-deployable pathway for dispersible metal catalysts in organic systems.

Ethanol Upgrading to n-Butanol Using Transition-Metal-Incorporated Poly(triazine)imide Frameworks

The upgrading of ethanol to n-butanol was performed using a molecular catalyst integrated into a carbon nitride support, one of the first examples of a supported molecular catalyst performing the Guerbet process. Initial studies using crystalline poly(triazine)imide (PTI) with lithium or transition-metal cations imbedded in the support together with a base as the catalyst system did not produce any significant amounts of n-butanol. However, when using the catalyst material formed by treatment of PTI-LiCl with [(Cp*)IrCl₂]₂ (Cp* = pentamethylcyclopentadienyl) along with sodium hydroxide, a 59% selectivity for butanol (13% yield) was obtained at 145 °C. This PTI-(Cp*)Ir material exhibited distinct UV-vis absorption features and powder X-ray diffractions which differ from those of the parent PTI-LiCl and [(Cp*)IrCl₂]₂. The PTI-(Cp*)Ir material was found to have a metal loading of 27% iridium per empirical unit of the framework. Along with the formation of n-butanol from the Guerbet reaction, the presence of higher chain alcohols was also observed.

Homologous RuO2-Ru heterostructures for tandem catalytic upgrading of ethanol

The homologous RuO₂-Ru heterostructure was demonstrated as an efficient tandem catalyst for upgrading ethanol. The adjacent RuO₂ and Ru separately serve as aldol condensation/dehydration and dehydrogenation/hydrogenation sites for ethanol conversion.

Anionic or neutral? the charge of Ni8 cubes in metal-organic framework compounds

The cubic SBU Ni₈X₆L₆ (X = OH^-/H₂O, L = ligand) is of great interest due to its stability and potential applications when integrated in MOFs. Here, we investigate by detailed DRIFTS measurements and exchange reactions whether it is found to be neutral in MOFs, as previously assumed in the literature, or whether it can show anionic character, as observed in complexes.

Structural Evolution of MOF-Derived RuCo, A General Catalyst for the Guerbet Reaction

Guerbet alcohols, a class of β-branched terminal alcohols, find widespread application because of their low melting points and excellent fluidity. Because of the limitations in the activity and selectivity of existing Guerbet catalysts, Guerbet alcohols are not currently produced via the Guerbet reaction but via hydroformylation of oil-derived alkenes followed by aldol condensation. In pursuit of a one-step synthesis of Guerbet alcohols from simple linear alcohol precursors, we show that MOF-derived RuCo alloys achieve over a million turnovers in the Guerbet reaction of 1-propanol, 1-butanol, and 1-pentanol. The active catalyst is formed in situ from ruthenium-impregnated metal-organic framework MFU-1. XPS and XAS studies indicate that the precatalyst is composed of Ru precursor trapped inside the MOF pores with no change in the oxidation state or coordination environment of Ru upon MOF incorporation. The significantly higher reactivity of Ru-impregnated MOF versus a physical mixture of Ru precursor and MOF suggests that the MOF plays an important role in templating the formation of the active catalyst and/or its stabilization. XPS reveals partial reduction of both ruthenium and MOF-derived cobalt under the Guerbet reaction conditions, and TEM/EDX imaging shows that Ru is decorated on the edges of dense nanoparticles, as well as thin nanoplates of CoOx. The use of ethanol rather than higher alcohols as a substrate results in lower turnover frequencies, and RuCo recovered from ethanol upgrading lacks nanostructures with plate-like morphology and does not exhibit Ru-enrichment on the surface and edge sites. Notably, 1H and 31P NMR studies show that through use of K3PO4 as a base promoter in the RuCo-catalyzed alcohol upgrading, the formation of carboxylate salts, a common side product in the Guerbet reaction, was effectively eliminated.

Renewable Butanol Production via Catalytic Routes

Fluctuating crude oil price and global environmental problems such as global warming and climate change lead to growing demand for the production of renewable chemicals as petrochemical substitutes. Butanol is a nonpolar alcohol that is used in a large variety of consumer products and as an important industrial intermediate. Thus, the production of butanol from renewable resources (e.g., biomass and organic waste) has gained a great deal of attention from researchers. Although typical renewable butanol is produced via a fermentative route (i.e., acetone-butanol-ethanol (ABE) fermentation of biomass-derived sugars), the fermentative butanol production has disadvantages such as a low yield of butanol and the formation of byproducts, such as acetone and ethanol. To avoid the drawbacks, the production of renewable butanol via non-fermentative catalytic routes has been recently proposed. This review is aimed at providing an overview on three different emerging and promising catalytic routes from biomass/organic waste-derived chemicals to butanol. The first route involves the conversion of ethanol into butanol over metal and oxide catalysts. Volatile fatty acid can be a raw chemical for the production of butanol using porous materials and metal catalysts. In addition, biomass-derived syngas can be transformed to butanol on non-noble metal catalysts promoted by alkali metals. The prospect of catalytic renewable butanol production is also discussed.

Photocatalytic cascade reactions and dye degradation over CdS-metal-organic framework hybrids

Two bifunctional CdS–MOF composites have been designed and fabricated. The hybrids exhibited synergistic photocatalytic performance toward two cascade reactions under visible light integrating photooxidation activity of CdS and Lewis acids/bases of the MOF. The composite further promoted the photodegradation of dyes benefiting from effective electron transfer between the MOF and CdS.

Two bifunctional CdS–MOF composites have been successfully fabricated and exhibited synergistic photocatalytic performance toward two-step cascade reactions and dye photodegradation.

Encapsulating Copper Nanocrystals into Metal-Organic Frameworks for Cascade Reactions by Photothermal Catalysis

Composite materials with multifunctional properties usually possess synergetic effects in catalysis toward cascade reactions. In this work, a facile strategy to the encapsulation of octahedral Cu₂ O nanocrystals (NCs) by metal-organic frameworks (MOFs) is reported, and an oriented growth of MOF enclosures (namely, HKUST-1) around Cu₂ O NCs with desired feedstock ratio is achieved. The strategy defines the parameter range that precisely controls the etching rate of metal oxide and the MOF crystallization rate. Finally, the Cu@HKUST-1 composites with uniform morphology and controlled MOF thickness have been successfully fabricated after the reduction of Cu₂ O to Cu NCs in HKUST-1. The integration of Cu NCs properties with MOF advantages helps to create a multifunctional catalyst, which exhibits cooperative catalytic activity and improved recyclability toward the one-pot cascade reactions under mild conditions involving visible-light irradiation. The superior performance can be attributed to the plasmonic photothermal effect of Cu NCs, while HKUST-1 shell provides Lewis acid sites, substrates and H₂ enrichment, and stabilizes the Cu cores.

Cross β-alkylation of primary alcohols catalysed by DMF-stabilized iridium nanoparticles

A simple method for the cross β-alkylation of linear alcohols with benzyl alcohols in the presence of DMF-stabilized iridium nanoparticles was developed. The nanoparticles were prepared in one-step and thoroughly characterized. Furthermore, the optimum reaction conditions have a wide substrate scope and excellent product selectivity.

Condensed Phase Guerbet Reactions of Ethanol/Isoamyl Alcohol Mixtures

The self-condensation and cross-condensation reactions of ethanol and isoamyl alcohol are examined to better understand the potential routes to value-added byproducts from fuel ethanol production. Reactions have been carried out in both batch autoclave and continuous condensed-phase reactors using a lanthanum-promoted, alumina-supported nickel catalyst at near-critical condensed phase conditions. Analysis of multiple candidate kinetic models led to a Langmuir–Hinshelwood rate expression that is first-order in alcohol with water as the strongly adsorbed species. This model provides the best fit of data from both batch and continuous reactor experiments. Activation energies for primary condensation reactions increase as carbon chain lengths increase. Selectivities to higher alcohols of 94% and 87% for ethanol and isoamyl alcohol, respectively, were observed at different operating conditions.

Chiral and SHG-Active Metal-Organic Frameworks Formed in Solution and on Surfaces: Uniformity, Morphology Control, Oriented Growth, and Postassembly Functionalization

We demonstrate the formation of uniform and oriented metal–organic frameworks using a combination of anion effects and surface chemistry. Subtle but significant morphological changes result from the nature of the coordinative counteranion of the following metal salts: NiX₂ with X = Br^–, Cl^–, NO₃^–, and OAc^–. Crystals could be obtained in solution or by template surface growth. The latter results in truncated crystals that resemble a half structure of the solution-grown ones. The oriented surface-bound metal–organic frameworks (sMOFs) are obtained via a one-step solvothermal approach rather than in a layer-by-layer approach. The MOFs are grown on Si/SiOx substrates modified with an organic monolayer or on glass substrates covered with a transparent conductive oxide (TCO). Regardless of the different morphologies, the crystallographic packing is nearly identical and is not affected by the type of anion or by solution versus the surface chemistry. A propeller-type arrangement of the nonchiral ligands around the metal center affords a chiral structure with two geometrically different helical channels in a 2:1 ratio with the same handedness. To demonstrate the accessibility and porosity of the macroscopically oriented channels, a chromophore (resorufin sodium salt) was successfully embedded into the channels of the crystals by diffusion from solution, resulting in fluorescent crystals. These “colored” crystals displayed polarized emission (red) with a high polarization ratio because of the alignment of these dyes imposed by the crystallographic structure. A second-harmonic generation (SHG) study revealed Kleinman symmetry-forbidden nonlinear optical properties. These surface-bound and oriented SHG-active MOFs have the potential for use as single nonlinear optical (NLO) devices.

Autogenous Production and Stabilization of Highly Loaded Sub-Nanometric Particles within Multishell Hollow Metal-Organic Frameworks and Their Utilization for High Performance in Li-O2 Batteries

Sub-nanometric particles (SNPs) of atomic cluster sizes have shown great promise in many fields such as full atom-to-atom utilization, but their precise production and stabilization at high mass loadings remain a great challenge. As a solution to overcome this challenge, a strategy allowing synthesis and preservation of SNPs at high mass loadings within multishell hollow metal-organic frameworks (MOFs) is demonstrated. First, alternating water-decomposable and water-stable MOFs are stacked in succession to build multilayer MOFs. Next, using controlled hydrogen bonding affinity, isolated water molecules are selectively sieved through the hydrophobic nanocages of water-stable MOFs and transferred one by one to water-decomposable MOFs. The transmission of water molecules via controlled hydrogen bonding affinity through the water-stable MOF layers is a key step to realize SNPs from various types of alternating water-decomposable and water-stable layers. This process transforms multilayer MOFs into SNP-embedded multishell hollow MOFs. Additionally, the multishell stabilizes SNPs by π-backbonding allowing high conductivity to be achieved via the hopping mechanism, and hollow interspaces minimize transport resistance. These features, as demonstrated using SNP-embedded multishell hollow MOFs with up to five shells, lead to high electrochemical performances including high volumetric capacities and low overpotentials in Li-O2 batteries.

Highly Dispersed Ni Catalyst on Metal-Organic Framework-Derived Porous Hydrous Zirconia for CO2 Methanation

We report the preparation of porous hydrous zirconia by treatment of zirconium-based metal-organic framework (MOF) UiO-66 with a strong base. Microporosity of the original MOF was partially retained in the resultant porous hydrous zirconia. Ni^II centers were then adsorbed onto the OH-rich hydrous zirconia and in situ converted to highly dispersed Ni⁰ for CO₂ hydrogenation to CH₄. The activated catalyst after an induction period showed a turnover frequency of 345 h^-1 or a space-time yield of 5851 mmol·g_Ni^-1·h^-1 with a CH₄ selectivity of over 99%. The catalyst was tested for 100 h on stream, showing only a 4% decrease in activity, and was found to convert atmospheric CO₂ to CH₄ via CO₂ collection through Na₂CO₃/NaHCO₃ cycling. Thermal decomposition of NaHCO₃ released CO₂ for hydrogenation to CH₄, and the resultant Na₂CO₃ absorbed CO₂ from air to form NaHCO₃. This work highlights the opportunity in using MOFs as precursors to prepare highly porous metal oxide/hydroxide supports for solid-gas phase catalysis.

Novel CoNi-metal-organic framework crystal-derived CoNi@C: synthesis and effective cascade catalysis

Evaluating the catalytic influence of metal sites on derivates obtained from the calcination of metal-organic frameworks (MOFs) is very important for the rational construction of novel MOFs. Based on this catalytic functional guidance, two new Co-MOF and CoNi-MOF crystals were designed and synthesized, and further pyrolyzed to obtain corresponding porous carbon-based catalysts. Interestingly, the derivates exhibited better catalytic performance toward the tandem reaction of dehydrogenation of NH3BH3 and subsequent hydrogenation reduction of nitro/olefin compounds than those of the CoNi-ZIF (a star MOF)-derived CoNi@carbon and most metal catalysts. Significantly, the CoNi@C maintained excellent activity, even after 30 cycles, demonstrating its great longevity and durability, which are especially important for the practical application of metal catalysts in industrial catalysis.