In Situ Bottom-up Synthesis of Porphyrin-Based Covalent Organic Frameworks

General synthesis of covalent organic frameworks under ambient condition within minutes via microplasma electrochemistry approach

Covalent organic frameworks (COFs) are typically synthesized using solvothermal conditions with high temperature and long reaction time (≥120 °C, >72 h). Herein, we report a general and rapid microplasma electrochemistry strategy to synthesize COFs under ambient conditions. A series of flexible imine-bond COFs with high-crystallinity were prepared in minutes via this method, which showed 1000-fold higher space-time yield than solvothermal method. This approach also achieved the preparation of COFs with diverse linkages including rigid imine, hydrazone, β-ketoenamies and azine linkages. Moreover, four types of imine-based COFs were successfully synthesized in aqueous acetic acid, which avoided the use of harmful organic solvents, indicating that microplasma method is green and versatile for COF synthesis. The obtained COFs showed higher surface area and exhibited superior performance in volatile iodine uptake compared to those COFs prepared by solvothermal method. After screening more than ten types of COFs, the iodine adsorption capacity could be promoted from 2.81 to 6.52 g g-1. The efficiency, versatility, and simplicity of the microplasma method render it as a promising approach for the swift screening of COFs across a wide range of applications.

Robust dioxin-linked metallophthalocyanine tbo topology covalent organic frameworks and their photocatalytic properties

Constructing 3D functional covalent organic frameworks (COFs) with both robust linkage and planar macrocycle building blocks still remains a challenge due to the difficulty in adjusting both the crystallinity and the dominant 2D structures. In addition, it is also challenging to selectively convert inert C(sp3)-H bonds into value-added chemicals. Herein, robust 3D COFs, USTB-28-M (M=Co, Ni, Cu), have been polymerized from the nucleophilic aromatic substitution reaction of D 3h-symmetric 2,3,6,7,14,15-hexahydroxyltriptycene with D 4h-symmetric hexadecafluorophthalocyanine (MPcF16) under solvothermal conditions. These chemically stable dioxin-linked COFs show isostructural tbo topology made up of three kinds of polyhedron subunits, exhibiting high Brunauer-Emmett-Teller surface areas of ≤1477 m2 g-1. In particular, the multiple polyhedron subunits in USTB-28-M could trap N-hydroxyphthalimide at their corners for easily forming stable phthalimide-N-oxyl radicals under visible-light irradiation. The generated radicals efficiently promote the aerobic oxidation of alkyl benzenes with an inert C(sp3)-H bond into various ketones. Among the three investigated COFs, the USTB-28-Co radical initiator exhibits the best photocatalytic oxidation activity, converting ethylbenzene into acetophenone with a turnover frequency of 63 h-1, which is much higher than those of the monomer CoPcF16 (8 h-1) and 2D dioxin-linked counterparts (13 h-1). This is due to the much prolonged lifetime of the excited state for USTB-28-Co based on the femtosecond transient absorption result. The present work not only presents 3D functional COFs with robust connection and permanent porosity, but also illustrates the uniqueness of porous structures of 3D COFs for high-performance photocatalysis.

In Situ Electrochemical Interfacial Polymerization for Covalent Organic Frameworks with Tunable Electrochromism

A rapid in situ synthesis of electrochromic covalent organic frameworks (EC-COFs) was proposed by using green electrochemical interface polymerization of N,N,N',N'-tetrakis(4-aminophenyl)-1,4-benzenediamine (TPDA) and 2,5-dihydroxyterephthalaldehyde (DHBD). The synthetized TPDA-DHBD films exhibit stable polymorphic color variations under different applied potentials, which can be attributed to the redox state changes of bis(triphenylamine) and imine electroactive functional groups within the COFs skeleton. TPDA-DHBD represents markedly different electrochromisms from red to cyan due to the steric hindrance effect caused by the presence of UO2 2+, demonstrating the unique tunability of COFs materials. This work offers a new feasible idea for rapid EC-COFs synthesis and tunable EC-COFs realization.

Constructing Chiral Covalent-Organic Frameworks for Circularly Polarized Light Detection

The use of chiral covalent organic frameworks (COFs) as active elements in photodetectors to directly identify circularly polarized light (CPL) can meet the requirement of integration and miniaturization of the as-fabricated devices. Herein, the design and synthesis of two isoreticular chiral two-dimensional (2D) COFs (CityU-7 and CityU-8) by introducing photosensitive porphyrin-based amines (5,10,15,20-tetrakis(4-aminophenyl)porphyrin) to enhance the optical absorption and chiral aldehyde linkage (2,5-bis((S/R))-2-methylbutoxy)terephthalaldehyde) to engender chirality for direct CPL detection  are  reported. Their crystalline structures  were  confirmed by powder X-ray diffraction, Fourier-transform infrared spectroscopy, and low-dose transition electron microscopy. Employing both chiral COFs as the active layers in photodetectors, left-handed circularly (LHC) and right-handed circularly (RHC) polarized light at 405 nm can be well distinguishable with short response time, high responsivity, and satisfying detectivity. The study provides the first example on the design and synthesis of chiral COFs for direct detection of CPL.

Tunable metal-organic frameworks assist in catalyzing DNAzymes with amplification platforms for biomedical applications

Various binding modes of tunable metal organic frameworks (MOFs) and functional DNAzymes (Dzs) synergistically catalyze the emergence of abundant functional nanoplatforms. Given their serial variability in formation, structural designability, and functional controllability, Dzs@MOFs tend to be excellent building blocks for the precise "intelligent" manufacture of functional materials. To present a clear outline of this new field, this review systematically summarizes the progress of Dz integration into MOFs (MOFs@Dzs) through different methods, including various surface infiltration, pore encapsulation, covalent binding, and biomimetic mineralization methods. Atomic-level and time-resolved catalytic mechanisms for biosensing and imaging are made possible by the complex interplay of the distinct molecular structure of Dzs@MOF, conformational flexibility, and dynamic regulation of metal ions. Exploiting the precision of DNAzymes, MOFs@Dzs constructed a combined nanotherapy platform to guide intracellular drug synthesis, photodynamic therapy, catalytic therapy, and immunotherapy to enhance gene therapy in different ways, solving the problems of intracellular delivery inefficiency and insufficient supply of cofactors. MOFs@Dzs nanostructures have become excellent candidates for biosensing, bioimaging, amplification delivery, and targeted cancer gene therapy while emphasizing major advancements and seminal endeavors in the fields of biosensing (nucleic acid, protein, enzyme activity, small molecules, and cancer cells), biological imaging, and targeted cancer gene delivery and gene therapy. Overall, based on the results demonstrated to date, we discuss the challenges that the emerging MOFs@Dzs might encounter in practical future applications and briefly look forward to their bright prospects in other fields.

Site-Selective Synthesis and Concurrent Immobilization of Imine-Based Covalent Organic Frameworks on Electrodes Using an Electrogenerated Acid

Imine-based covalent organic frameworks (COFs) are crystalline porous materials with prospective uses in various devices. However, general bulk synthetic methods usually produce COFs as powders that are insoluble in most of the common organic solvents, arising challenges for the subsequent molding and fixing of these materials on substrates. Here, we report a novel synthetic methodology that utilizes an electrogenerated acid (EGA), which is produced at an electrode surface by electrochemical oxidation of a suitable precursor, acting as an effective Brønsted acid catalyst for imine bond formation from the corresponding amine and aldehyde monomers. Simultaneously, it provides the corresponding COF film deposited on the electrode surface. The COF structures obtained with this method exhibited high crystallinities and porosities, and the film thickness could be controlled. Furthermore, such process was applied for the synthesis of various imine-based COFs, including a three-dimensional (3D) COF structure.

Emulsion-Directed Synthesis of Poly-Porphyrin Nanoparticles as Heterogeneous Photocatalysts for PET-RAFT Polymerization

Heterogeneous photocatalysts have attracted extensive attention in photo-induced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization due to their remarkable advantages such as easy preparation, tunable photoelectric properties, and recyclability. In this study, zinc (II) 5,10,15,20-tetrakis(4-aminophenyl)porphyrin (ZnTAPP)-based poly-porphyrin nanoparticles (PTAPP-Zn) are constructed by an emulsion-directed approach. It is investigated as a heterogeneous photocatalyst for PET-RAFT polymerization of various methacrylate monomers under visible light exposure, and the reactions show refined polymerization control with high monomer conversions. Furthermore, it is demonstrated that the PTAPP-Zn nanoparticles with the larger pore size enhance photocatalytic activity in PET-RAFT polymerization. In addition, the capabilities of oxygen tolerance and temporal control are demonstrated and PTAPP-Zn particles can be easily recycled and reused without an obvious decrease in catalytic efficiency.

Amazing enhancement of OER performances: creating a well-designed functional Ni and N-doped carbon layer as a support material for fabricating a NiFe-LDH electrocatalyst

A well-designed support material between catalyst and substrate can always significantly enhance the performance of an electrode on water oxidation. In this work, a functional Ni and N-doped carbon layer (NNC) was designed on carbon paper (CP) via pyrolysis by using a controlled electrodeposited polyporphyrin as a precursor. Consequently, the fabricated NiFe-LDH/NNC/CP achieved a catalytic current density of 100 mA cm-2 at a small overpotential of 231 mV with a low Tafel slope of 26.0 mV dec-1, as well as high durability for more than 360 h. The insights are that N-doping reinforces the hydrophilicity and the catalyst binding capacity, while Ni-doping intensifies the conductivity.

In Situ Rapid Electrochemical Fabrication of Porphyrin-Based Covalent Organic Frameworks: Novel Fibers for Electro-Enhanced Solid-Phase Microextraction

Electro-enhanced solid-phase microextraction (EE-SPME) is a bright separation and enrichment technique that integrates solid-phase microextraction with the electric field. It retains the excellent extraction performance of SPME technology while having the advantages of efficient driving of electric field and special interaction between the electric field and electrons in the molecules of material structure. Replacing conventional SPME fibers with highly efficient and highly conductive original EE-SPME fibers is critical for the practical applications of these technologies. Here, a novel fiber preparation strategy was proposed to obtain a highly conductive porphyrin-based covalent organic framework (POR-COF) by one-step electropolymerization. Benefiting from the excellent semiconducting properties of porphyrin groups, the POR-COF can be spontaneously polymerized on the fiber surface under an appropriate voltage within a few hours. Its performance was evaluated by the EE-SPME of phthalate esters (PAEs) from food and environmental samples, followed by gas chromatography-tandem triple quadrupole mass spectrometry (GC-MS/MS) technology. The results showed that the POR-COF fiber has been successfully used for the detection of trace PAEs in beverages, industrial wastewater, lake water, and oyster samples with high adsorption selectivity and satisfactory sensitivity. The remarkable extraction properties are mainly attributed to the synergistic effect from material characteristics and electrical parameters' control in the extraction process. The presented strategy for the controlled design and synthesis of highly conductive porphyrin-based covalent organic framework fibers offers prospects in developing EE-SPME technologies.

Covalent organic frameworks (COFs): a promising CO2 capture candidate material

Covalent organic frameworks (COFs) are an emerging kind of porous crystal material.

Triazine-Porphyrin-Based Hyperconjugated Covalent Organic Framework for High-Performance Photocatalysis

Covalent organic frameworks (COFs) with porphyrins as structural units are a new kind of porous organic polymers, which have a regular and ordered structure, abundant porosity, and good stability. In the past, the construction of porphyrin COFs was generally synthesized by routes such as a Schiff base reaction. Here, we report a new COF structure by linking the porphyrin with the triazine ring. Using a cyano group-terminated porphyrin as a structural unit precursor, a new triazine-porphyrin hyperconjugated COF (TA-Por-sp²-COF) was constructed through the cyano group's self-polymerization. The extension of porphyrin units in two directions that stemmed from the cyano group at para-positions accounts for the establishment of a highly ordered two-dimensional topological structure. Attributing to the collaboration of electron-donating and withdrawing blocks for photo-induced carrier separation and adequate porosity for mass diffusion, this hyperconjugated system showed high photocatalytic performance in organic reactions such as the aerobic coupling reaction of benzylamine and thioanisole selective oxidation.

Modulating the Band Structure of Metal Coordinated Salen COFs and an In Situ Constructed Charge Transfer Heterostructure for Electrocatalysis Hydrogen Evolution

A series of crystalline, stable Metal (Metal = Zn, Cu, Ni, Co, Fe, and Mn)-Salen covalent organic framework (COF)EDA complex are prepared to continuously tune the band structure of Metal-Salen COFEDA , with the purpose of optimizing the free energy intermediate species during the hydrogen evolution reaction (HER) process. The conductive macromolecular poly(3,4-ethylenedioxythiophene) (PEDOT) is subsequently integrated into the one-dimensional (1D) channel arrays of Metal-Salen COFEDA to form heterostructure PEDOT@Metal-Salen COFEDA via the in situ solid-state polymerization method. Among the Metal-Salen COFEDA and PEDOT@Metal-Salen COFEDA complexes, the optimized PEDOT@Mn-Salen COFEDA displays prominent electrochemical activity with an overpotential of 150 mV and a Tafel slope of 43 mV dec-1 . The experimental results and density of states data show that the continuous energy band structure modulation in Metal-Salen COFEDA has the ability to make the metal d-orbital interact better with the s-orbital of H, which is conducive to electron transport in the HER process. Moreover, the calculated charge density difference indicates that the heterostructures composed of PEDOT and Metal-Salen COFEDA induce an intramolecular charge transfer and construct highly active interfacial sites.

Nanoscale porphyrin assemblies based on charge-transfer strategy with enhanced red-shifted absorption

Charge-transfer assemblies (CTAs) represent a new class of functional material due to their excellent optical properties, and show great promise in the biomedical field. Porphyrins are widely used photosensitizers, but the short absorption wavelengths may restrict their practical applications. To obtain porphyrin phototherapeutic agents with red-shifted absorption, charge-transfer nanoscale assemblies (TAPP-TCNQ NPs) of 5,10,15,20-tetrakis(4-aminophenyl) porphyrin (TAPP) and 7,7,8,8‑tetracyanoquinodimethane (TCNQ) were prepared via optimizing the stoichiometric ratios of donor-acceptor. The as-prepared TAPP-TCNQ NPs exhibit red-shifted absorption to the near-infrared (NIR) region and enhanced absorbance because of the charge-transfer interactions. In especial, TAPP-TCNQ NPs possess the capacity of both photodynamic and photothermal therapy, thus effectively killing the bacteria upon 808 nm laser irradiation. This modular assembly method provides an alternative strategy to enhance the application of the phototherapeutic agents.

Porphyrin-Based COF 2D Materials: Variable Modification of Sensing Performances by Post-Metallization

2D nanomaterials with flexibly modifiable surfaces are highly sought after for various applications, especially in room-temperature chemiresistive gas sensing. Here, we have prepared a series of COF 2D nanomaterials (porphyrin-based COF nanosheets (NS)) that enabled highly sensitive and specific-sensing of NO₂ at room temperature. Different from the traditional 2D sensing materials, H₂ -TPCOF was designed with a largely reduced interlayer interaction and predesigned porphyrin rings as modifiable sites on its surfaces for post-metallization. After post-metallization, the metallized M-TPCOF (M=Co and Cu) showed remarkably improved sensing performances. Among them, Co-TPCOF exhibited highly specific sensing toward NO₂ with one of the highest sensitivities of all reported 2D materials and COF materials, with an ultra-low limit-of-detection of 6.8 ppb and fast response/recovery. This work might shed light on designing and preparing a new type of surface-highly-modifiable 2D material for various chemistry applications.

Electronic and energy level engineering of directly fused porphyrin-conjugated polymers - impact of the central metal cation

The integration of porphyrins and their derivatives in functional devices for solar-assisted fuel production is both highly attractive and challenging due to the difficulties in processing them. This limitation is overcome in the gas-phase approach, particularly by oxidative chemical vapor deposition (oCVD), leading to the simultaneous synthesis and deposition of conjugated porphyrin coatings. We have investigated the impact of the metal cation of 5,15-diphenyl metalloporphyrins (MDPP; M = Co, Cu, Mg, Zn, Pd, Pt, Ag, Ru, Ag, and FeCl) on the dehydrogenative coupling reaction leading to fused-metalloporphyrin thin films via oCVD and on the optoelectronic properties of the resulting thin films. We found that the nature of the chelated cation strongly affects the intermolecular coupling efficiency, as well as the occurrence of side reactions such as chlorination, intramolecular cyclization, demetallation/re-metalation, and oxidation of the porphyrin core. Moreover, we discussed the influence of the above-mentioned reactions on the optoelectronic properties of the fused metalloporphyrin coatings, in view of their potential application in photo-electrocatalytic systems. This study paves the way toward the engineering and future implementation of porphyrin-based systems for clean and efficient solar fuel production.

Nanofiber Architecture Engineering Implemented by Electrophoretic-Induced Self-Assembly Deposition Technology for Flash-Type Memristors

Electrophoretic deposition (EPD) has been recognized as a promising large-scale film preparation technology for industrial application. Inspired by the conventional EPD method and the crystal diffusion growth strategy, we propose a modified electrophoretic-induced self-assembly deposition (EPAD) technique to control the morphologies of organic functional materials. Here, an ionic-type dye with a conjugated skeleton and strong noncovalent interactions, celestine blue (CB), is chosen as a module molecule for EPAD investigation. As expected, CB molecules can assemble into different nanostructures, dominated by applied voltage, concentration effect, and duration. Compared to a nanopillar layered packing structure formed by the traditional spin-coating method, the EPAD approach can produce a nanofiber structure under a fixed condition of 10 V/10 min. Intriguingly, a memristor device based on a pillar-like nanostructure exhibits WORM-type behavior, while a device based on nanofibers presents Flash memory performance. The assemble process and the memory mechanism are uncovered by molecular dynamics simulations and density-functional theory (DFT) calculations. This work endows the typical EPD technique with a fresh application scenario, where an in-depth study on the growth mechanism of nanofibers and the positive effect of unique morphologies on memristor performance are offered.

Porous organic polymers for electrocatalysis

Porous organic polymers (POPs) composed of organic building units linked via covalent bonds are a class of lightweight porous network materials with high surface areas, tuneable pores, and designable components and structures. Owing to their well-preserved characteristics in terms of structure and composition, POPs applied as electrocatalysts have shown promising activity and achieved considerable advances in numerous electrocatalytic reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, CO₂ reduction reaction, N₂ reduction reaction, nitrate/nitrite reduction reaction, nitrobenzene reduction reaction, hydrogen oxidation reaction, and benzyl alcohol oxidation reaction. Herein, we present a systematic overview of recent advances in the applications of POPs in these electrocatalytic reactions. The synthesis strategies, specific active sites, and catalytic mechanisms of POPs are summarized in this review. The fundamental principles of some electrocatalytic reactions are also concluded. We further discuss the current challenges of and perspectives on POPs for electrocatalytic applications. Meanwhile, the possible future directions are highlighted to afford guidelines for the development of efficient POP electrocatalysts.

On-surface synthesis of 2D COFs via molecular assembly directed photocycloadditions: a first-principles investigation

Over the past decades, the rational synthesis of two-dimensional covalent organic framework (2D COFs) monolayer via on-surface chemistry has been widely explored. Herein, we propose the [2 + 2] photocycloaddition as a novel strategy for large-scale fabrication of COFs from theoretical perspective. Thanks to the symmetry forbidden of thermal [2 + 2] cycloaddition, the molecular precursors carrying vinyl groups will not chemically interact with each other during thermal annealing, which is essential to achieve molecular assembly. The subsequent photocycloaddition of these precursors may produce large-scale 2D COFs at low temperatures, in which the symmetry of molecular assembly remains unchanged. Our results show that 2D COFs can be produced via [2 + 2] photocycloadditions directed from self-assembled precursors, in which alkylbenzene molecules with vinyl groups on side chains exhibit appropriate intermolecular distances. By performing high-throughput calculations, several promising molecular precursors are proposed to achieve large-scale 2D COFs. This work provides an applicable strategy for the large-scale synthesis of 2D carbon materials.

Recent Progress in Nanoscale Covalent Organic Frameworks for Cancer Diagnosis and Therapy

Covalent organic frameworks (COFs) as a type of porous and crystalline covalent organic polymer are built up from covalently linked and periodically arranged organic molecules. Their precise assembly, well-defined coordination network, and tunable porosity endow COFs with diverse characteristics such as low density, high crystallinity, porous structure, and large specific-surface area, as well as versatile functions and active sites that can be tuned at molecular and atomic level. These unique properties make them excellent candidate materials for biomedical applications, such as drug delivery, diagnostic imaging, and disease therapy. To realize these functions, the components, dimensions, and guest molecule loading into COFs have a great influence on their performance in various applications. In this review, we first introduce the influence of dimensions, building blocks, and synthetic conditions on the chemical stability, pore structure, and chemical interaction with guest molecules of COFs. Next, the applications of COFs in cancer diagnosis and therapy are summarized. Finally, some challenges for COFs in cancer therapy are noted and the problems to be solved in the future are proposed.

2D Redox-Active Covalent Organic Frameworks for Supercapacitors: Design, Synthesis, and Challenges

Due to the tunable skeletons, variable pore environments, and predesignable structures, covalent organic frameworks (COFs) can be served as a versatile platform to tailor redox activities for efficient energy storage. Redox-active COFs with specific functional groups can not only promote high-speed mass transport in the permanently open channels, but also provide dense active sites for reversible redox reactions so as to efficiently adsorb the electrolyte ions, thus becoming emerging and promising electroactive materials. This review summarizes the design principles and synthetic methods of redox-active COFs, with a focus on surveying the representative advances in supercapacitors. The key progress, major challenges, and future directions in this promising field are highlighted as well.

Controlled growth of ultrafine metal nanoparticles mediated by solid supports

As a unique class of nanomaterials with a high surface-area-to-volume ratio and narrow size distribution, ultrafine metal nanoparticles (UMNPs) have shown exciting properties in many applications, particularly in the field of catalysis. Growing UMNPs in situ on solid supports enables precise control of the UMNP size, and the supports can effectively prevent the aggregation of UMNPs and maintain their high catalytic activity. In this review, we summarize the recent research progress in controlled growth of UMNPs using various solid supports and their applications in catalysis.

CO2 hydrogenation over functional nanoporous polymers and metal-organic frameworks

CO₂ is one of the major environmental pollutants and its mitigation is attracting huge attention over the years due to continuous increase in this greenhouse gas emission in the atmosphere. Being environmentally hazardous and plentiful presence in nature, CO₂ utilization as C1 resource into fuels and feedstock is very demanding from the green chemistry perspectives. To accomplish this CO₂ utilization issue, functional organic materials like porous organic polymers (POPs), covalent organic frameworks (COFs) as well as organic-inorganic hybrid materials like metal-organic frameworks (MOFs), having characteristics of large surface area, high thermal stability and tunability in the porous nanostructures play significant role in designing the suitable catalyst for the CO₂ hydrogenation reactions. Although CO₂ hydrogenation is a widely studied and emerging area of research, till date review exclusively focused on designing POPs, COFs and MOFs bearing reactive functional groups is very limited. A thorough literature review on this matter will enrich our knowledge over the CO₂ hydrogenation processes and the catalytic sites responsible for carrying out these chemical transformations. We emphasize recent state-of-the art developments in POPs/COFs/MOFs having unique functionalities and topologies in stabilizing metallic NPs and molecular complexes for the CO₂ reduction reactions. The major differences between MOFs and porous organics are critically summarized in the outlook section with the aim of the future benefit in mitigating CO₂ emission from ambient air.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

Fabrication of One-Dimensional Organic Nanofiber Networks via Electrophoretic Deposition for a Nonvolatile Memory Device

Despite many advanced growth methodologies for organic nanofibers (ONFs), the lack of efficient and scalable ONF-based film preparation technologies has long been a hindrance in their practical application in organic electronic devices. Here, a typical cathode electrophoretic deposition (C-EPD) technology was developed to controllably produce ONFs and their corresponding thin films. Using the solvent effect and an external electric field force during the C-EPD process, a one-dimensional ONF network was formed, which exhibits compact molecular packing and superior optoelectronic properties in the thin-film state. Prototype sandwich-structure memory devices based on these ONF films exhibited a binary nonvolatile memory performance significantly superior than that of the bulk materials. This study provides an efficient and scalable ONF fabrication technology for high-performance electronic devices in various potential applications.

Electrochemical Sensors Based on Covalent Organic Frameworks: A Critical Review

The metal-free cousins of metal-organic frameworks, covalent organic frameworks (COFs), are a class of pre-designable crystalline polymers composed of light elements and connected by strong covalent bonds. COFs are being given more and more attention in the electrochemical sensor field due to their fascinating properties, such as highly tunable porosity, intrinsic chemical and thermal stability, structural diversity, large specific surface area, and unique adsorption characteristics. However, there are still some key issues regarding COFs that need to be urgently resolved before they can be effectively applied in electrochemical sensing. In this review, we summarized recent achievements in developing novel electrochemical sensors based on COFs, and discussed the key fundamental and challenging issues that need to be addressed, including the mechanisms underlying charge transport, methods to improve electrical conductivity, immobilization methods on different substrates, synthesis strategies for nanoscale COFs, and the application of COFs in different fields. Finally, the challenges and outlooks in this promising field are tentatively proposed.

Electroactive Covalent Organic Frameworks: Design, Synthesis, and Applications

Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with tailorable compositions, porosities, functionalities, and intrinsic chemical stability. The incorporation of electroactive moieties in the structure transforms COFs into electroactive materials with great potential for energy-related applications. Herein, the recent advances in the design and use of electroactive COFs as capacitors, batteries, conductors, fuel cells, water-splitting, and electrocatalysis are addressed. Their remarkable performance is discussed and compared with other porous materials; hence, perspectives in the development of electroactive COFs are presented.

Pre-Polymerization Enables Controllable Synthesis of Nanosheet-Based Porphyrin Polymers towards High-Performance Li-Ion Batteries

The precise regulation of nucleation growth and assembly of polymers is still an intriguing goal but an enormous challenge. In this study, we proposed a pre-polymerization strategy to regulate the assembly and growth of polymers by facilely controlling the concentration of polymerization initiator, and thus obtained two kinds of different nanosheet-based porphyrin polymer materials using tetrakis-5,10,15,20-(4-aminophenyl) porphyrin (TAPP) as the precursor. Notably, due to the π-π stacking and doping of TAPP during the preparation process, the obtained PTAPP-nanocube material exhibits a high intrinsic bulk conductivity reaching 1.49×10^-4  S m^-1 . Profiting from the large π-conjugated structure of porphyrin units, closely stacked layer structure and excellent conductivity, the resultant porphyrin polymers, as electrode materials for lithium ion batteries, deliver high specific capacity (≈650 mAh g^-1 at the current density of 100 mA g^-1 ), excellent rate performance and long-cycle stability, which are among the best reports of porphyrin polymer-based electrode materials for lithium-ion batteries, to the best of our knowledge. Therefore, such a pre-polymerization approach would provide a new insight for the controllable synthesis of polymers towards custom-made architecture and function.

Copper-Doped Nanoscale Covalent Organic Polymer for Augmented Photo/Chemodynamic Synergistic Therapy and Immunotherapy

Due to the specific tumor microenvironment (TME) and immunosuppressive state of cancer cells, conventional antitumor therapies face severe challenges, such as high rates of recurrence and metastasis. Herein, Cu-PPT nanoparticles were synthesized based on copper acetate, p-phenylenediamine, and 5,10,15,20-tetra-(4-aminophenyl)porphyrin via oxidative coupling reaction for the first time, and the resultant product was used for synergistic photothermal therapy (PTT), photodynamic therapy (PDT), and chemodynamic therapy (CDT). The polymer nanoparticles exhibited excellent photodynamic and photothermal effect with a photothermal conversion efficacy of 40.1% under 650 and 808 nm laser irradiation, respectively. Encapsulated Cu(I)/Cu(II) ions permitted Cu-PPT with glutathione (GSH) peroxidase-mimicking, catalase-mimicking, and Fenton-like activity to regulate TME. Depletion of overexpressed GSH would reduce antioxidant capacity, generated O₂ could relieve hypoxia for enhancing PDT, and hyperthermia from PTT could promote the yield of ·OH. This multifunctional nanosystem with cascade reactions could inhibit tumor growth and activate immune responses effectively. By further combining with antiprogrammed death-ligand 1 (anti-PD-L1) checkpoint blockade therapy, distant tumor growth and cancer metastasis were successfully suppressed.

Solving the COF trilemma: towards crystalline, stable and functional covalent organic frameworks

Strategies in covalent organic frameworks and adjacent fields are highlighted for designing stable, ordered and functional materials.