Electron-Transfer and Redox Reactivity of High-Valent Iron Imido and Oxo Complexes with the Formal Oxidation States of Five and Six

Water-Soluble Iron Porphyrins as Catalysts for Suppressing Chlorinated Disinfection Byproducts in Hypochlorite-Dependent Water Remediation

We are facing a world-wide shortage of clean drinking water which will only be further exacerbated by climate change. The development of reliable and affordable methods for water remediation is thus of utmost importance. Chlorine (which forms active hypochlorites in solution) is the most commonly used disinfectant due to its reliability and low cost. One drawback is that it reacts with organic pollutants to generate toxic chlorinated byproducts. To mitigate chlorination in water remediation, we have investigated the use of catalytic amounts of charged water-soluble iron porphyrins. These are known to activate hypochlorite to generate high valent oxoiron species. We studied the depletion of the model micropollutant phenol and the accumulation of chlorinated disinfection byproducts under water remediation conditions, using iron porphyrins [(TMPyP)FeCl]Cl4 and (NH4)4[(TPPS)FeCl] as catalysts, by membrane inlet mass spectrometry. Despite bearing opposite charges on the meso-substituent, both iron porphyrins suppress the formation of chlorinated disinfection by-products equally well. To gain further insight, spectroscopic studies were performed. These showed the transient formation of Compound II, followed by either regeneration of the iron(III) porphyrin at low NaOCl concentrations, or total decomposition of the porphyrin complex at high NaOCl concentrations. Potential future directions for modifications of porphyrin-based catalysts are discussed.

Bromide as Noninnocent Ligand to Iron Tames Fenton Chemistry for Chemoselective Nondegrading Oxidation

It has long been the chemistry dogma that the nitrogen-based ligand of iron complexes determines the redox reactivity; tetra- and/or pentadentate nitrogen-based ligand (N-ligand: PDP, porphyrin, N4Py) enables chemo-selective oxidation through high-valent iron species (FeIV/V═O), while bi- and/or tridentate N-ligand leads to the generation of highly reactive oxygen species (ROS) (i.e., hydroxyl radical) via a Fenton chemistry pathway. The effect of inorganic anionic ligands (i.e., halides, pseudohalides, triflate, nitrate, sulfate, etc) of these iron complexes has rarely been examined and overlooked as an "innocent" anion. Herein, we report our discovery that bromide (Br-) is not an innocent ligand to the iron-BPMA complexes [BMPA: bis(2-pyridylmethyl)amine] but a decisive factor for taming the Fenton chemistry (ROS) into a mild [HOBr] oxidant, which allows for chemo- and regioselective oxidation of furans, indoles, and sulfides without noticeable degradation. In contrast to the conventional Fenton chemistry pathway by many tridentate N-ligand iron complexes, our [Fe(BMPA)Br3] mimics haloperoxidases to generate HOBr by oxidation of bromide ion with hydrogen peroxide. The discovery of the bromide effect on iron complexes bridges the gap between Fenton chemistry and haloperoxidase-catalyzed halogenation and might stimulate interest in reinvestigating the "innocent" ligand of iron complexes for discovery of new reactivity and new applications. Additionally, the new catalytic system represents a mild and green oxidation method that might be useful in academia and industry.

Synthesis, Structure, and Redox Reactivity of Ni Complexes Bearing a Redox and Acid-Base Non-innocent Ligand with NiII, NiIII, and NiIV Formal Oxidation States

A series of Ni complexes bearing a redox and acid-base noninnocent tetraamido macrocyclic ligand, H4-(TAML-4) {H4-(TAML-4) = 15,15-dimethyl-5,8,13,17-tetrahydro-5,8,13,17-tetraaza-dibenzo[a,g]cyclotridecene-6,7,14,16-tetraone}, with formal oxidation states of NiII, NiIII, and NiIV were synthesized and characterized structurally and spectroscopically. The X-ray crystallographic analysis of the Ni complexes revealed a square planar geometry, and the [Ni(TAML-4)] complex with the formal oxidation state of NiIV was characterized to be [NiIII(TAML-4•+)] with the oxidation state of the NiIII ion and the one-electron oxidized TAML-4 ligand, TAML-4•+. The NiIII oxidation state and the TAML-4 radical cation ligand, TAML-4•+, were supported by X-ray absorption spectroscopy and density functional theory calculations. The reversible interconversions between [NiII(TAML-4)]2- and [NiIII(TAML-4)]- and between [NiIII(TAML-4)]- and [NiIII(TAML-4•+)] were demonstrated in spectroelectrochemical measurements as well as in chemical oxidation and reduction reactions. The reactivities of [NiIII(TAML-4)]- and [NiIII(TAML-4•+)] were then investigated in hydride transfer reactions using NADH analogs. Hydride transfer from 9,10-dihydro-10-methylacridine (AcrH2) to [NiIII(TAML-4•+)] was found to proceed via electron transfer (ET) from AcrH2 to [NiIII(TAML-4•+)] with no deuterium kinetic isotope effect (kH/kD = 1.0(2)). In contrast, hydride transfer from AcrH2 to [NiIII(TAML-4)]- proceeded much more slowly via a concerted proton-coupled electron transfer (PCET) process with kH/kD = 7.0(5). In the latter reaction, an electron and a proton were transferred to the NiIII center and the TAML-4 ligand, respectively. The mechanisms of the ET by [NiIII(TAML-4•+)] and the concerted PCET by [NiIII(TAML-4)]- were ascribed to the different redox potentials of the Ni complexes.

Nonheme iron catalyst mimics heme-dependent haloperoxidase for efficient bromination and oxidation

The [Fe]/H2O2 oxidation system has found wide applications in chemistry and biology. Halogenation with this [Fe]/H2O2 oxidation protocol and halide (X-) in the biological system is well established with the identification of heme-iron-dependent haloperoxidases. However, mimicking such halogenation process is rarely explored for practical use in organic synthesis. Here, we report the development of a nonheme iron catalyst that mimics the heme-iron-dependent haloperoxidases to catalyze the generation of HOBr from H2O2/Br- with high efficiency. We discovered that a tridentate terpyridine (TPY) ligand designed for Fenton chemistry was optimal for FeBr3 to form a stable nonheme iron catalyst [Fe(TPY)Br3], which catalyzed arene bromination, Hunsdiecker-type decarboxylative bromination, bromolactonization, and oxidation of sulfides and thiols. Mechanistic studies revealed that Fenton chemistry ([Fe]/H2O2) might operate to generate hydroxyl radical (HO•), which oxidize bromide ion [Br-] into reactive HOBr. This nonheme iron catalyst represents a biomimetic model for heme-iron-dependent haloperoxidases with potential applications in organic synthesis, drug discovery, and biology.

Iron Corrole-Catalyzed Intramolecular Amination Reactions of Alkyl Azides. Spectroscopic Characterization and Reactivity of [FeV(Cor)(NAd)]

As nitrogen analogues of iron-oxo species, high-valent iron-imido species have attracted great interest in the past decades. FeV-alkylimido species are generally considered to be key reaction intermediates in Fe(III)-catalyzed C(sp3)─H bond aminations of alkyl azides but remain underexplored. Here, it is reported that iron-corrole (Cor) complexes can catalyze a wide range of intramolecular C─H amination reactions of alkyl azides to afford a variety of 5-, 6- and 7-membered N-heterocycles, including alkaloids and natural product derivatives, with up to 3880 turnover numbers (TONs) and excellent diastereoselectivity (>99:1 d.r.). Mechanistic studies including density functional theory (DFT) calculations and intermolecular hydrogen atom abstraction (HAA) reactions reveal key reactive FeV-alkylimido intermediates. The [FeV(Cor)(NAd)] (Ad = adamantyl) complex is independently prepared and characterized through electron paramagnetic resonance (EPR), resonance Raman (rR) measurement, and X-ray photoelectron spectroscopy (XPS). This complex is reactive toward HAA reactions with kinetic isotope effects (KIEs) similar to [Fe(Cor)]-catalyzed intramolecular C─H amination of alkyl azides.

Design of Highly Electrophilic and Stable Metal Nitrido Complexes

ConspectusMetal oxo (M═O) and nitrido (M≡N) complexes are two important classes of high-valent transition metal complexes. The use of M═O as oxidants in chemical and biological systems has been extensively investigated. Nature makes use of M═O in enzymes such as cytochrome P450 to oxidize a variety of substrates. Highly oxidizing oxo species have also been synthesized and they have been shown to oxidize organic and inorganic substrates via one-electron oxidation, O atom transfer, and H atom abstraction pathways. In contrast, the oxidation chemistry of M≡N is much less investigated. Although a variety of nitrido complexes are known, most of them are inert and do not show appreciable oxidizing properties, which is not unexpected since the N3- ligand is much more electron-donating than the O2- ligand. In principle, highly electrophilic/oxidizing nitrido complexes may be designed by using weakly coordinating ancillary ligands and/or by increasing the oxidation state of the metal centers. A number of such species have been generated in solution at low temperatures. However, attempts to isolate them are often hampered by their ease of decomposition via bimolecular N···N coupling to generate N2. In some cases, decomposition occurs by intramolecular nitrogenation of the ancillary ligand.In this account, we describe our recent efforts into the design of nitrido complexes that are highly oxidizing but stable enough so they can be isolated and characterized, and their reactivity toward organic substrates can be readily investigated.We have successfully isolated and determined the structure of the first stable manganese(VI) nitrido complex bearing an oxidation-resistant macrocyclic tetraamido TAML ligand, [MnVI(N)(TAML)]- (H4TAML = 3,3,6,6,9,9-hexamethyl-3,4,8,9-tetrahydro-1H-benzo[e][1,4,7,10] tetraazacyclotridecine-2,5,7,10(6H,11H)-tetraone). This complex readily undergoes direct aziridination of alkenes; it also abstracts hydrides from NADH analogues via a Separated CPET mechanism. Coupling of the nitrido ligands to give dinitrogen is a major decomposition pathway for electrophilic nitrido complexes. In order to shut down this pathway, we made use of a bulky trianionic corrole ligand TTPPC (H3TTPPC = 5,10,15-tris(2,4,6-triphenylphenyl)corrole) to prepare manganese nitrido complexes. Remarkably, we were able to isolate and determine the structures of [MnV(N)(TTPPC)]- and its one- and two-electron ligand-oxidized products, [MnV(N)(TTPPC+•)] and [MnV(N)(TTPPC2+)]+ ("TTPPC" has a 3- charge, 'TTPPC+•' has an overall 2- charge and 'TTPPC2+' has an overall 1- charge). Although [MnV(N)(TTPPC2+)]+ is formally a manganese(V) complex, it was found to be the most electrophilic among isolated metal nitrido complexes. The use of the bulky corrole ligand effectively prevents the decomposition of Mn≡N by N···N coupling.A number of luminescent M═O species that possess highly oxidizing excited states are known. We have also developed a strongly luminescent osmium(VI) nitrido complex, [OsVI(N)(L)(CN)3]- (OsN, HL = 2-(2-hydroxy-5-nitrophenyl)benzoxazole), that absorbs visible light to generate a highly oxidizing/electrophilic excited state. The excited state readily reacts with a wide variety of organic and inorganic substrates, many of these reactions are unprecedented. Notably, it reacts with cyclohexane to give an osmium(IV) cyclohexyliminato product, and with benzene to give an osmium(IV) p-benzoquinone iminato species.

[Fe(NCMe)6](BF4)2 is a bifunctional catalyst for styrene aziridination by nitrene transfer and heterocycle expansion by subsequent dipolar insertion

The solvated iron(II) salt [Fe(NCMe)6](BF4)2 (Me = methyl) is shown to be a bifunctional catalyst with respect to aziridination of styrene. The salt serves as an active catalyst for nitrene transfer from PhINTs to styrene to form 2-phenyl-N-tosylaziridine (Ph = phenyl; Ts = tosyl, -S{O}2-p-C6H4Me). The iron(II) salt also acts as a Lewis acid in non-coordinating CH2Cl2 solution, to catalyze heterolytic CN bond cleavage of the aziridine and insertion of dipolarophiles. The 1,3-zwitterionic intermediate is presumably supported by interaction of the metal dication with the anion, and by resonance stabilization of the carbocation. Nucleophilic dipolarophiles then insert to give a five-membered heterocyclic ring. The result is a two-step cycloaddition, formally [2 + 1 + 2], that is typically regiospecific, but not stereospecific. This reaction mechanism was confirmed by conducting a series of one-step, [3 + 2] additions of unsaturated molecules into pre-formed 2-phenyl-N-tosylaziridine, also catalyzed by [Fe(NCMe)6](BF4)2. Relevant substrates include styrenes, carbonyl compounds and alkynes. These yield five-membered heterocylic rings, including pyrrolidines, oxazolidines and dihydropyrroles, respectively. The reaction scope appears limited only by the barrier to formation of the dipolar intermediate, and by the nucleophilicity of the captured dipolarophile. The bifunctionality of an inexpensive, earth-abundant and non-toxic catalyst suggests a general strategy for one-pot construction of heterocyclic rings, as demonstrated specifically for pyrrolidine ring formation.

Iron-Catalyzed Intermolecular C-H Amination Assisted by an Isolated Iron-Imido Radical Intermediate

Here we report the use of a base metal complex [(tBu pyrpyrr2 )Fe(OEt2 )] (1-OEt2 ) (tBu pyrpyrr2 2- =3,5-tBu2 -bis(pyrrolyl)pyridine) as a catalyst for intermolecular amination of Csp3 -H bonds of 9,10-dihydroanthracene (2 a) using 2,4,6-trimethyl phenyl azide (3 a) as the nitrene source. The reaction is complete within one hour at 80 °C using as low as 2 mol % 1-OEt2 with control in selectivity for single C-H amination versus double C-H amination. Catalytic C-H amination reactions can be extended to other substrates such as cyclohexadiene and xanthene derivatives and can tolerate a variety of aryl azides having methyl groups in both ortho positions. Under stoichiometric conditions the imido radical species [(tBu pyrpyrr2 )Fe{=N(2,6-Me2 -4-tBu-C6 H2 )] (1-imido) can be isolated in 56 % yield, and spectroscopic, magnetometric, and computational studies confirmed it to be an S = 1 FeIV complex. Complex 1-imido reacts with 2 a to produce the ferrous aniline adduct [(tBu pyrpyrr2 )Fe{NH(2,6-Me2 -4-tBu-C6 H2 )(C14 H11 )}] (1-aniline) in 45 % yield. Lastly, it was found that complexes 1-imido and 1-aniline are both competent intermediates in catalytic intermolecular C-H amination.

Visible-Light-Driven Silyl or Germyl Radical Generation via Si-C or Ge-C Bond Homolysis

We report a simple, rapid, and selective protocol for visible-light-driven generation of silyl radicals through photoredox-induced Si-C bond homolysis. Irradiating 3-silyl-1,4-cyclohexadienes with blue light in the presence of a commercially available photocatalyst smoothly generated silyl radicals bearing various substituents within 1 h, and these radicals were trapped by a broad range of alkenes to afford products in good yields. This process is also available for efficient generation of germyl radicals.

Theoretical investigation on the elusive structure-activity relationship of bioinspired high-valence nickel-halogen complexes in oxidative fluorination reactions

Very recently, bioinspired high-valence metal-halogen complexes have been proven to be competent oxidants in the C-H bond activation and heteroatom dihalogenation reactions. However, the structure-activity relationship of such active species and the reaction mechanisms of oxidations mediated by these oxidants are still elusive. In this study, density functional theory (DFT) calculations were performed to systematically study the oxidizing ability of the high-valence Ni^III-X (X = F and Cl) complexes Et₄N[Ni^III(Cl/F)(L)], (1_Cl/F, Et = ethyl, L = N,N'-(2,6-dimethylphenyl)-2,6-pyridinedicarboxamide), such as the reaction mechanism of fluorination of 1,4-cyclohexadiene (CHD) by 1_F in the presence of AgF and the reaction mechanism of difluorination of triphenyl phosphine (PPh₃) by 1_F. All calculated results fit well with the experiments and present new mechanistic findings. The C-H bond activation by the high-valence nickel(III)-halogen complexes was found to proceed via a hydrogen-atom transfer (HAT) mechanism by analysis of the molecular orbitals of the transition states. C-H bond activation by 1_F takes a Ni-F-H angle of ca. 180°, whereas that by 1_Cl takes an angle of ca. 120° on the transition states. These results indicate that the exchange-enhanced reactivity is responsible for the dramatic oxidative difference between these two oxidants. The role of AgF in C-H fluorination of CHD by 1_F is proposed to act as a Lewis acid adduct, AgF-binding Ni(III)-fluorine complex 1_F-Ag-F, which acts both as an oxidant in C-H bond activation and as a fluorine donor in the fluorination step. A cooperative oxidation mechanism involving two 1_F oxidants was proposed for the difluorination of PPh₃ by 1_F. These theoretical findings will enrich the knowledge of high-valence metal-halogen chemistry and play a positive role in the rational design of new catalysts.

A Contrasting Effect of Acid in Electron Transfer, Oxygen Atom Transfer, and Hydrogen Atom Transfer Reactions of a Nickel(III) Complex

There have been many examples of the accelerating effects of acids in electron transfer (ET), oxygen atom transfer (OAT), and hydrogen atom transfer (HAT) reactions. Herein, we report a contrasting effect of acids in the ET, OAT, and HAT reactions of a nickel(III) complex, [Ni^III(PaPy₃*)]²⁺ (1) in acetone/CH₃CN (v/v 19:1). 1 was synthesized by reacting [Ni^II(PaPy₃*)]⁺ (2) with magic blue or iodosylbenzene in the absence or presence of triflic acid (HOTf), respectively. Sulfoxidation of thioanisole by 1 and H₂O occurred in the presence of HOTf, and the reaction rate increased proportionally with increasing concentration of HOTf ([HOTf]). The rate of ET from diacetylferrocene to 1 also increased linearly with increasing [HOTf]. In contrast, HAT from 9,10-dihydroanthracene (DHA) to 1 slowed down with increasing [HOTf], exhibiting an inversely proportional relation to [HOTf]. The accelerating effect of HOTf in the ET and OAT reactions was ascribed to the binding of H⁺ to the PaPy₃* ligand of 2; the one-electron reduction potential (E_red) of 1 was positively shifted with increasing [HOTf]. Such a positive shift in the E_red value resulted in accelerating the ET and OAT reactions that proceeded via the rate-determining ET step. On the other hand, the decelerating effect of HOTf on HAT from DHA to 1 resulted from the inhibition of proton transfer from DHA^•+ to 2 due to the binding of H⁺ to the PaPy₃* ligand of 2. The ET reactions of 1 in the absence and presence of HOTf were well analyzed in light of the Marcus theory of ET in comparison with the HAT reactions.

The first macrocyclic abnormally coordinating tetra-1,2,3-triazole-5-ylidene iron complex: a promising candidate for olefin epoxidation

The first macrocyclic and abnormally coordinating, mesoionic N-heterocyclic carbene iron complex has been synthesised and characterised via ESI-MS, EA, SC-XRD, CV, NMR and UV/Vis spectroscopy. ¹³C-NMR spectroscopy and CV measurements indicate a strong σ-donor ability of the carbene moieties, suggesting an efficient catalytic activity of the iron complex in oxidation reactions. Initial tests in the epoxidation of cis-cyclooctene as a model substrate confirm this assumption.

Non-heme oxoiron complexes as active intermediates in the water oxidation process with hydrogen/oxygen atom transfer reactions

In this study, we explore the water oxidation process with the help of density functional theory. The formation of an oxygen-oxygen bond is crucial in the water oxidation process. Here, we report the formation of the oxygen-oxygen bond by the N5-coordinate oxoiron species with a higher oxidation state of Fe^IV and Fe^V. This bond formation is studied through the nucleophilic addition of water molecules and the transfer of the oxygen atom from meta-chloroperbenzoic acid (mCPBA). Our study reveals that the oxygen-oxygen bond formation by reacting mCPBA with Fe^VO requires less activation barrier (13.7 kcal mol^-1) than the other three pathways. This bond formation by the oxygen atom transfer (OAT) pathway is more favorable than that achieved by the hydrogen atom transfer (HAT) pathway. In both cases, the oxygen-oxygen bond formation occurs by interacting the σ*d_z²-2p_z molecular orbital of the iron-oxo intermediate with the 2p_x orbital of the oxygen atom. From this study, we understand that the oxygen-oxygen bond formation by Fe^IVO with the OAT process is also feasible (16 kcal mol^-1), suggesting that Fe^VO may not always be required for the water oxidation process by non-heme N5-oxoiron. After the oxygen-oxygen bond formation, the release of the dioxygen molecule occurs with the addition of the water molecule. The release of dioxygen requires a barrier of 7.0 kcal mol^-1. The oxygen-oxygen bond formation is found to be the rate-determining step.

A mechanistic switch in C−H bond activation by elusive FeV(O)(TAML) reaction intermediate: A theoretical study

The divergent behavior of C−H bond oxidations of aliphatic substrates compared to those of aromatic substrates shown in Gupta's experiment was mechanistically studied herein by means of density functional theory calculations. Our calculations reveal that such difference is caused by different reaction mechanisms between two kinds of substrates (the aliphatic cyclohexane, 2,3-dimethylbutane and the aromatic toluene, ethylbenzene and cumene). For the aliphatic substrates, C−H oxidation by the oxidant FeV(O)(TAML) is a hydrogen atom transfer process; whereas for the aromatic substrates, C−H oxidation is a proton-coupled electron transfer (PCET) process with a proton transfer character on the transition state, that is, a proton-coupled electron transfer process holding a proton transfer-like transition state (PCET(PT)). This difference is caused by the strong π− π interactions between the tetra-anionic TAML ring and the phenyl ring of the aromatic substrates, which has a “pull” effect to make the electron transfer from substrates to the Fe=O moiety inefficient.

Reactive High-Valent Iron Intermediates in Enhancing Treatment of Water by Ferrate

Efforts are being made to tune the reactivity of the tetraoxy anion of iron in the +6 oxidation state (Fe^VIO₄^2-), commonly called ferrate, to further enhance its applications in various environmental fields. This review critically examines the strategies to generate highly reactive high-valent iron intermediates, Fe^VO₄^3- (Fe^V) and Fe^IVO₄^4- or Fe^IVO₃^2- (Fe^IV) species, from Fe^VIO₄^2-, for the treatment of polluted water with greater efficiency. Approaches to produce Fe^V and Fe^IV species from Fe^VIO₄^2- include additions of acid (e.g., HCl), metal ions (e.g., Fe(III)), and reductants (R). Details on applying various inorganic reductants (R) to generate Fe^V and Fe^IV from Fe^VIO₄^2- via initial single electron-transfer (SET) and oxygen-atom transfer (OAT) to oxidize recalcitrant pollutants are presented. The common constituents of urine (e.g., carbonate, ammonia, and creatinine) and different solids (e.g., silica and hydrochar) were found to accelerate the oxidation of pharmaceuticals by Fe^VIO₄^2-, with potential mechanisms provided. The challenges of providing direct evidence of the formation of Fe^V/Fe^IV species are discussed. Kinetic modeling and density functional theory (DFT) calculations provide opportunities to distinguish between the two intermediates (i.e., Fe^IV and Fe^V) in order to enhance oxidation reactions utilizing Fe^VIO₄^2-. Further mechanistic elucidation of activated ferrate systems is vital to achieve high efficiency in oxidizing emerging pollutants in various aqueous streams.

Nonheme Iron Imido Complexes Bearing a Non-Innocent Ligand: A Synthetic Chameleon Species in Oxidation Reactions

High-valent iron-imido complexes can perform C-H activation and sulfimidation reactions, but are far less studied than the more ubiquitous iron-oxo species. As case studies, we have looked at a recently published iron(V)-imido ligand π-cation radical complex, which is formally an iron(VI)-imido complex [Fe^V (NTs)(TAML^+. )] (1; NTs=tosylimido), and an iron(V)-imido complex [Fe^V (NTs)(TAML)]^- (2). Using a theoretical approach, we found that they have multiple energetically close-lying electromers, sometimes even without changing spin states, reminiscent of the so-called Compound I in Cytochrome P450. When studying their reactivity theoretically, it is indeed found that their electronic structures may change to perform efficient oxidations, emulating the multi-spin state reactivity in Fe^IV O systems. This is actually in contrast to the known [Fe^V (O)(TAML)]^- species (3), where the reactions occur only on the ground spin state. We also looked into the whole reaction pathway for the C-H bond activation of 1,4-cyclohexadiene by these intermediates to reproduce the experimentally observed products, including steps that usually attract no interest (neither theoretically nor experimentally) due to their non-rate-limiting status and fast reactivity. A new "clustering non-rebound mechanism" is presented for this C-H activation reaction.

Structure and Reactivity of a Manganese(VI) Nitrido Complex Bearing a Tetraamido Macrocyclic Ligand

Manganese complexes in +6 oxidation state are rare. Although a number of Mn(VI) nitrido complexes have been generated in solution via one-electron oxidation of the corresponding Mn(V) nitrido species, they are too unstable to isolate. Herein we report the isolation and the X-ray structure of a Mn(VI) nitrido complex, [Mn^VI(N)(TAML)]^- (2), which was obtained by one-electron oxidation of [Mn^V(N)(TAML)]^2- (1). 2 undergoes N atom transfer to PPh₃ and styrenes to give Ph₃P═NH and aziridines, respectively. A Hammett study for various p-substituted styrenes gives a V-shaped plot; this is rationalized by the ability of 2 to function as either an electrophile or a nucleophile. 2 also undergoes hydride transfer reactions with NADH analogues, such as 10-methyl-9,10-dihydroacridine (AcrH₂) and 1-benzyl-1,4-dihydronicotinamide (BNAH). A kinetic isotope effect of 7.3 was obtained when kinetic studies were carried out with AcrH₂ and AcrD₂. The reaction of 2 with NADH analogues results in the formation of [Mn^V(N)(TAML-H⁺)]^- (3), which was characterized by ESI/MS, IR spectroscopy, and X-ray crystallography. These results indicate that this reaction occurs via an initial "separated CPET" (separated concerted proton-electron transfer) mechanism; that is, there is a concerted transfer of 1 e^- + 1 H⁺ from AcrH₂ (or BNAH) to 2, in which the electron is transferred to the Mn^VI center, while the proton is transferred to a carbonyl oxygen of TAML rather than to the nitrido ligand.

Is the Electrophilicity of the Metal Nitrene the Sole Predictor of Metal-Mediated Nitrene Transfer to Olefins? Secondary Contributing Factors as Revealed by a Library of High-Spin Co(II) Reagents

Recent research has highlighted the key role played by the electron affinity of the active metal-nitrene/imido oxidant as the driving force in nitrene additions to olefins to afford valuable aziridines. The present work showcases a library of Co(II) reagents that, unlike the previously examined Mn(II) and Fe(II) analogues, demonstrate reactivity trends in olefin aziridinations that cannot be solely explained by the electron affinity criterion. A family of Co(II) catalysts (17 members) has been synthesized with the assistance of a trisphenylamido-amine scaffold decorated by various alkyl, aryl, and acyl groups attached to the equatorial amidos. Single-crystal X-ray diffraction analysis, cyclic voltammetry and EPR data reveal that the high-spin Co(II) sites (S = 3/2) feature a minimal [N3N] coordination and span a range of 1.4 V in redox potentials. Surprisingly, the Co(II)-mediated aziridination of styrene demonstrates reactivity patterns that deviate from those anticipated by the relevant electrophilicities of the putative metal nitrenes. The representative L4Co catalyst (-COCMe3 arm) is operating faster than the L8Co analogue (-COCF3 arm), in spite of diminished metal-nitrene electrophilicity. Mechanistic data (Hammett plots, KIE, stereocontrol studies) reveal that although both reagents follow a two-step reactivity path (turnover-limiting metal-nitrene addition to the C b atom of styrene, followed by product-determining ring-closure), the L4Co catalyst is associated with lower energy barriers in both steps. DFT calculations indicate that the putative [L4Co]NTs and [L8Co]NTs species are electronically distinct, inasmuch as the former exhibits a single-electron oxidized ligand arm. In addition, DFT calculations suggest that including London dispersion corrections for L4Co (due to the polarizability of the tert-Bu substituent) can provide significant stabilization of the turnover-limiting transition state. This study highlights how small ligand modifications can generate stereoelectronic variants that in certain cases are even capable of overriding the preponderance of the metal-nitrene electrophilicity as a driving force.

Iron-catalyzed stereoselective haloamidation of amide-tethered alkynes

In this work, by using N-methoxybenzamides as efficient acyl nitrene precursors, an iron-catalyzed formal cis-haloamidation of alkyne is reported. Without assistance of additives, the reaction worked well in the presence of 50 mol% FeCl3 or FeBr3, leading to a series of chloro/bromo-containing isoindolin-5-ones with high efficiency and wide reaction scope. In the reaction, the iron-facilitated haloamidation proceeds through a halo anion-participating concerted [3+2] cyclization to release the final products. The key intermediate ferric acyl nitrene A is generated in situ from a formal removal of MeOH.

Photo-initiated oxidation of C-H bonds by diimine complexes of vanadium(V)

The photochemical activation of carbon-hydrogen bonds by vanadium(v)-dioxo and vanadium(v)-oxo-peroxo diimine complexes is described. Reactions were carried out using a selection of organic substrates with C-H bond dissociation free energy values between 70 and 97 kcal mol-1. The ability to activate C-H bonds using vanadium(v)-dioxo and vanadium(v)-oxo-peroxo diimine complexes varies with different bond dissociation free energy. Compounds with weaker C-H bonds are oxidized in minutes, rather than in days for thermal oxidations by the corresponding complexes. Dioxygen is necessary for substrate consumption, which suggests that the electronically excited V complexes are radical reaction initiators via H-atom abstraction from the organic substrate.

Ligand Architecture Perturbation Influences the Reactivity of Nonheme Iron(V)-Oxo Tetraamido Macrocyclic Ligand Complexes: A Combined Experimental and Theoretical Study

Iron(V)-oxo complexes bearing negatively charged tetraamido macrocyclic ligands (TAMLs) have provided excellent opportunities to investigate the chemical properties and the mechanisms of oxidation reactions of mononuclear nonheme iron(V)-oxo intermediates. Herein, we report the differences in chemical properties and reactivities of two iron(V)-oxo TAML complexes differing by modification on the "Head" part of the TAML framework; one has a phenyl group at the "Head" part (1), whereas the other has four methyl groups replacing the phenyl ring (2). The reactivities of 1 and 2 in both C-H bond activation reactions, such as hydrogen atom transfer (HAT) of 1,4-cyclohexadiene, and oxygen atom transfer (OAT) reactions, such as the oxidation of thioanisole and its derivatives, were compared experimentally. Under identical reaction conditions, 1 showed much greater reactivity than 2, such as a 10²-fold decrease in HAT and a 10⁵-fold decrease in OAT by replacing the phenyl group (i.e., 1) with four methyl groups (i.e., 2). Then, density functional theory calculations were performed to rationalize the reactivity differences between 1 and 2. Computations reproduced the experimental findings well and revealed that the replacement of the phenyl group in 1 with four methyl groups in 2 not only increased the steric hindrance but also enlarged the energy gap between the electron-donating orbital and the electron-accepting orbital. These two factors, steric hindrance and the orbital energy gap, resulted in differences in the reduction potentials of 1 and 2 and their reactivities in oxidation reactions.

Catalytic Chemoselective Sulfimidation with an Electrophilic [CoIII (TAML)]- -Nitrene Radical Complex*

The cobalt species PPh4 [CoIII (TAMLred )] is a competent and stable catalyst for the sulfimidation of (aryl)(alkyl)-substituted sulfides with iminoiodinanes, reaching turnover numbers up to 900 and turnover frequencies of 640 min-1 under mild and aerobic conditions. The sulfimidation proceeds in a highly chemoselective manner, even in the presence of alkenes or weak C-H bonds, as supported by inter- and intramolecular competition experiments. Functionalization of the sulfide substituent with various electron-donating and electron-withdrawing arenes and several alkyl, benzyl and vinyl fragments is tolerated, with up to quantitative product yields. Sulfimidation of phenyl allyl sulfide led to [2,3]-sigmatropic rearrangement of the initially formed sulfimide species to afford the corresponding N-allyl-S-phenyl-thiohydroxylamines as attractive products. Mechanistic studies suggest that the actual nitrene transfer to the sulfide proceeds via (previously characterized) electrophilic nitrene radical intermediates that afford the sulfimide products via electronically asynchronous transition states, in which SET from the sulfide to the nitrene radical complex precedes N-S bond formation in a single concerted process.

Iron-catalyzed intramolecular acyl nitrene/alkyne metalation for the synthesis of pyrrolo[2,1-a]isoindol-5-ones

In this work, by using N-methoxybenzamides as efficient acyl nitrene precursors, an iron-catalyzed acyl nitrene/alkyne metalation is reported for the synthesis of pyrrolo[2,1-a]isoindol-5-ones.

EPR spectroscopy elucidates the electronic structure of [FeV(O)(TAML)] complexes

The complete hyperfine tensor of ¹⁷O of the Fe^V-oxo moeity was probed by ENDOR spectroscopy. The EPR spectroscopic results reported here provide a conclusive experimental basis for elucidating the electronic structure of the Fe^V-oxo complex.

Growth of macroporous TiO2 on B-doped g-C3N4 nanosheets: a Z-scheme photocatalyst for H2O2 production and phenol oxidation under visible light

BCN/TiO₂ heterostructured photocatalyst was demonstrated towards H₂O₂ production and phenol oxidation under visible light, based on Z-scheme and p–n heterojunction mechanism.

Generation and Reactivity of a NiIII2(μ-1,2-peroxo) Complex

High-valent transition metal-oxo, -peroxo, and -superoxo complexes are crucial intermediates in both biological and synthetic oxidation of organic substrates, water oxidation, and oxygen reduction. While high-valent oxygenated complexes of Mn, Fe, Co, and Cu are increasingly well-known, high-valent oxygenated Ni complexes are comparatively rarer. Herein we report the isolation of such an unusual high-valent species in a thermally unstable Ni^III₂(μ-1,2-peroxo) complex, which has been characterized using single-crystal X-ray diffraction and X-ray absorption, NMR, and UV-vis spectroscopies. Reactivity studies show that this complex is stable toward dissociation of oxygen but reacts with simple nucleophiles and electrophiles.

Deciphering the origin of million-fold reactivity observed for the open core diiron [HO-FeIII-O-FeIV[double bond, length as m-dash]O]2+ species towards C-H bond activation: role of spin-states, spin-coupling, and spin-cooperation

High-valent metal-oxo species have been characterised as key intermediates in both heme and non-heme enzymes that are found to perform efficient aliphatic hydroxylation, epoxidation, halogenation, and dehydrogenation reactions. Several biomimetic model complexes have been synthesised over the years to mimic both the structure and function of metalloenzymes. The diamond-core [Fe2(μ-O)2] is one of the celebrated models in this context as this has been proposed as the catalytically active species in soluble methane monooxygenase enzymes (sMMO), which perform the challenging chemical conversion of methane to methanol at ease. In this context, a report of open core [HO(L)FeIII-O-FeIV(O)(L)]2+ (1) gains attention as this activates C-H bonds a million-fold faster compared to the diamond-core structure and has the dual catalytic ability to perform hydroxylation as well as desaturation with organic substrates. In this study, we have employed density functional methods to probe the origin of the very high reactivity observed for this complex and also to shed light on how this complex performs efficient hydroxylation and desaturation of alkanes. By modelling fifteen possible spin-states for 1 that could potentially participate in the reaction mechanism, our calculations reveal a doublet ground state for 1 arising from antiferromagnetic coupling between the quartet FeIV centre and the sextet FeIII centre, which regulates the reactivity of this species. The unusual stabilisation of the high-spin ground state for FeIV[double bond, length as m-dash]O is due to the strong overlap of with the orbital, reducing the antibonding interactions via spin-cooperation. The electronic structure features computed for 1 are consistent with experiments offering confidence in the methodology chosen. Further, we have probed various mechanistic pathways for the C-H bond activation as well as -OH rebound/desaturation of alkanes. An extremely small barrier height computed for the first hydrogen atom abstraction by the terminal FeIV[double bond, length as m-dash]O unit was found to be responsible for the million-fold activation observed in the experiments. The barrier height computed for -OH rebound by the FeIII-OH unit is also smaller suggesting a facile hydroxylation of organic substrates by 1. A strong spin-cooperation between the two iron centres also reduces the barrier for second hydrogen atom abstraction, thus making the desaturation pathway competitive. Both the spin-state as well as spin-coupling between the two metal centres play a crucial role in dictating the reactivity for species 1. By exploring various mechanistic pathways, our study unveils the fact that the bridged μ-oxo group is a poor electrophile for both C-H activation as well for -OH rebound. As more and more evidence is gathered in recent years for the open core geometry of sMMO enzymes, the idea of enhancing the reactivity via an open-core motif has far-reaching consequences.

Enhanced Redox Reactivity of a Nonheme Iron(V)-Oxo Complex Binding Proton

Acid effects on the chemical properties of metal-oxygen intermediates have attracted much attention recently, such as the enhanced reactivity of high-valent metal(IV)-oxo species by binding proton(s) or Lewis acidic metal ion(s) in redox reactions. Herein, we report for the first time the proton effects of an iron(V)-oxo complex bearing a negatively charged tetraamido macrocyclic ligand (TAML) in oxygen atom transfer (OAT) and electron-transfer (ET) reactions. First, we synthesized and characterized a mononuclear nonheme Fe(V)-oxo TAML complex (1) and its protonated iron(V)-oxo complexes binding two and three protons, which are denoted as 2 and 3, respectively. The protons were found to bind to the TAML ligand of the Fe(V)-oxo species based on spectroscopic characterization, such as resonance Raman, extended X-ray absorption fine structure (EXAFS), and electron paramagnetic resonance (EPR) measurements, along with density functional theory (DFT) calculations. The two-protons binding constant of 1 to produce 2 and the third protonation constant of 2 to produce 3 were determined to be 8.0(7) × 10⁸ M^-2 and 10(1) M^-1, respectively. The reactivities of the proton-bound iron(V)-oxo complexes were investigated in OAT and ET reactions, showing a dramatic increase in the rate of sulfoxidation of thioanisole derivatives, such as 10⁷ times increase in reactivity when the oxidation of p-CN-thioanisole by 1 was performed in the presence of HOTf (i.e., 200 mM). The one-electron reduction potential of 2 (E_red vs SCE = 0.97 V) was significantly shifted to the positive direction, compared to that of 1 (E_red vs SCE = 0.33 V). Upon further addition of a proton to a solution of 2, a more positive shift of the E_red value was observed with a slope of 47 mV/log([HOTf]). The sulfoxidation of thioanisole derivatives by 2 was shown to proceed via ET from thioanisoles to 2 or direct OAT from 2 to thioanisoles, depending on the ET driving force.

Electronically Asynchronous Transition States for C–N Bond Formation by Electrophilic [CoIII(TAML)]-Nitrene Radical Complexes Involving Substrate-to-Ligand Single-Electron Transfer and a Cobalt-Centered Spin Shuttle

The oxidation state of the redox noninnocent tetra-amido macrocyclic ligand (TAML) scaffold was recently shown to affect the formation of nitrene radical species on cobalt(III) upon reaction with PhI=NNs [van LeestN. P.; J. Am. Chem. Soc.2020, 142, 552−56331846578]. For the neutral [Co^III(TAML^sq)] complex, this leads to the doublet (S = 1/2) mono-nitrene radical species [Co^III(TAML^q)(N^•Ns)(Y)] (bearing an unidentified sixth ligand Y in at least the frozen state), while a triplet (S = 1) bis-nitrene radical species [Co^III(TAML^q)(N^•Ns)₂]^– is generated from the anionic [Co^III(TAML^red)]^– complex. The one-electron-reduced Fischer-type nitrene radicals (N^•Ns^–) are formed through single (mono-nitrene) or double (bis-nitrene) ligand-to-substrate single-electron transfer (SET). In this work, we describe the reactivity and mechanisms of these nitrene radical complexes in catalytic aziridination. We report that [Co^III(TAML^sq)] and [Co^III(TAML^red)]^– are both effective catalysts for chemoselective (C=C versus C–H bonds) and diastereoselective aziridination of styrene derivatives, cyclohexane, and 1-hexene under mild and even aerobic (for [Co^III(TAML^red)]^–) conditions. Experimental (Hammett plots; [Co^III(TAML)]-nitrene radical formation and quantification under catalytic conditions; single-turnover experiments; and tests regarding catalyst decomposition, radical inhibition, and radical trapping) in combination with computational (density functional theory (DFT), N-electron valence state perturbation theory corrected complete active space self-consistent field (NEVPT2-CASSCF)) studies reveal that [Co^III(TAML^q)(N^•Ns)(Y)], [Co^III(TAML^q)(N^•Ns)₂]^–, and [Co^III(TAML^sq)(N^•Ns)]^– are key electrophilic intermediates in aziridination reactions. Surprisingly, the electrophilic one-electron-reduced Fischer-type nitrene radicals do not react as would be expected for nitrene radicals (i.e., via radical addition and radical rebound). Instead, nitrene transfer proceeds through unusual electronically asynchronous transition states, in which the (partial) styrene substrate to TAML ligand (single-) electron transfer precedes C–N coupling. The actual C–N bond formation processes are best described as involving a nucleophilic attack of the nitrene (radical) lone pair at the thus (partially) formed styrene radical cation. These processes are coupled to TAML-to-cobalt and cobalt-to-nitrene single-electron transfer, effectively leading to the formation of an amido-γ-benzyl radical (NsN^––CH₂–^•CH–Ph) bound to an intermediate spin (S = 1) cobalt(III) center. Hence, the TAML moiety can be regarded to act as a transient electron acceptor, the cobalt center behaves as a spin shuttle, and the nitrene radical acts as a nucleophile. Such a mechanism was hitherto unknown for cobalt-catalyzed hypovalent group transfer and the more general transition-metal-catalyzed nitrene transfer to alkenes but is now shown to complement the known concerted and stepwise mechanisms for N-group transfer.

Mechanistic dichotomies in redox reactions of mononuclear metal–oxygen intermediates

This review article focuses on various mechanistic dichotomies in redox reactions of metal–oxygen intermediates with the emphasis on understanding and controlling their redox reactivity from experimental and theoretical points of view.

Proton-promoted disproportionation of iron(v)-imido TAML to iron(v)-imido TAML cation radical and iron(iv) TAML

An iron(v)-imido TAML complex is disproportionated to give an iron(v)-imido TAML cation radical and an iron(iv) TAML upon addition of acids.