Evolution of Surface Tension and Hansen Parameters of a Homologous Series of Imidazolium-Based Ionic Liquids

In this study, we systematically analyze the surface tension and Hansen solubility parameters (HSPs) of imidazolium-based ionic liquids (ILs) with different anions ([NTf2]-, [PF6]-, [I]-, and [Br]-). These anions are combined with the classical 1-alkyl-3-methyl-substituted imidazolium cations ([CnC1Im]+) and a group of oligoether-functionalized imidazolium cations ([(mPEGn)2Im]+) based on methylated polyethylene glycol (mPEGn). In detail, the influences of the length of the alkyl- and the mPEGn-chain, the anion size, and the water content are investigated experimentally. For [CnC1Im]+-based ILs, the surface tension decreases with increasing alkyl chain length in all cases, but the magnitude of this decrease depends on the size of the anion ([NTf2]- < [PF6]- < [Br]- ≤ [I]-). Molecular dynamics (MD) simulations on [CnC1Im]+-based ILs indicate that these differences are caused by the interplay of charged and uncharged domains, in particular in the different anions, which affects the ability of the alkyl chains of the cation to orient toward the liquid-gas interface. An increase in the mPEGn-chain length of the [(mPEGn)2Im][A] ILs does not significantly influence the surface tension. These changes upon variation of the cation/anion combination do not correlate with the evolution of the HSPs for the two sets of ILs. Finally, our data suggest that significant water contents up to water mole fractions of x(H2O) = 0.25 do not significantly affect the surface tension of the studied binary IL-water mixtures.

Divalent Titanium via Reductive N-C Coupling of a TiIV Nitrido with π-Acids

The nitrido-ate complex [(PN)2Ti(N){μ2-K(OEt2)}]2 (1) reductively couples CO and isocyanides in the presence of DME or cryptand, to form rare, five-coordinate TiII complexes having a linear cumulene motif, [K(L)][(PN)2Ti(NCE)] (E = O, L = Kryptofix222, (2); E = NAd, L = 3 DME, (3); E = NtBu, L = 3 DME, (4); E = NAd, L = Kryptofix222, (5)). Oxidation of 2-5 with [Fc][OTf] afforded an isostructural TiIII center containing a neutral cumulene [(PN)2Ti(NCE)] (E = O, (6); E = NAd (7), NtBu (8)). Moreover, 1e- reduction of 6 and 7 in the presence of cryptand cleanly reformed corresponding discrete TiII complexes 2 and 5, which were further characterized by solution magnetization measurements and high- frequency and -field EPR (HFEPR) spectroscopy. Furthermore, oxidation of 7 with [Fc*][B(C6F5)4] resulted in a ligand disproportionated TiIV complex having transoid carbodiimides, [(PN)2Ti(NCNAd)2] (9). Comparison of spectroscopic, structural, and computational data for the divalent, trivalent, and tetravalent systems, including their 15N enriched isotopomers demonstrate these cumulenes to decrease in order of backbonding as TiII→TiIII→TiIV and increasing order of p-donation as TiII→TiIII→TiIV, thus displaying more covalency in TiIII species. Lastly, we show a synthetic cycle whereby complex 1 can deliver an N-atom to π-acids.

Enhanced Photostability of Lead Halide Perovskite Nanocrystals with Mn3+ Incorporation

Recently, lead halide perovskite nanocrystals (NCs) have shown great potential and have been widely studied in lighting and optoelectronic fields. However, the long-term stability of perovskite NCs under irradiation is an important challenge for their application in practice. Mn2+ dopants are mostly proposed as substitutes for the Pb site in perovskite NCs synthesized through the hot-injection method, with the aim of improving both photo- and thermal stability. In this work, we employed a facile ligand-assisted reprecipitate strategy to introduce Mn ions into perovskite lattice, and the results showed that Mn3+ instead of Mn2+, even with a very low level of incorporation of 0.18 mol % as interstitial dopant, can enhance the photostability of perovskite binder film under the ambient conditions without emission change, and the photoluminescent efficiency can retain 70% and be stable under intensive irradiation for 12 h. Besides, Mn3+ incorporation could prolong the photoluminescent decay time by passivating trap defects and modifying the distortion of the lattice, which underscores the significant potential for application as light emitters.

Unlocking the Metalation Applications of TMP-powered Fe and Co(II) Bis(amides): Synthesis, Structure and Mechanistic Insights

Typified by LiTMP and TMPMgCl.LiCl, (TMP = 2,2,6,6-tetramethylpiperidide), s-block metal amides have found widespread applications in arene deprotonative metalation. On the contrary transition metal amides lack sufficient basicity to activate these substrates. Breaking new ground in this field, here we present the synthesis and full characterisation of earth abundant transition metals M(TMP)2 (M= Fe, Co). Uncovering a new reactivity profile towards fluoroarenes these amide complexes can promote direct M-H exchange processes regioselectively using one or two of their basic amide arms. Remarkably even when using perfluorinated substrate, selective CH-metalation occurs leaving C-F bonds intact. Their kinetic basicity can be boosted by LiCl or (nBu)4NCl additives which enables formation of kinetically activated ate species. Combining spectroscopic and structural studies with DFT calculations, mechanistic insights have been gained on how these low polarity metalation processes take place. M(TMP)2 can also be used to access ferrocene and cobaltocene by direct deprotonation of cyclopentadiene and to undergo efficient CO2 insertion of both amide groups under mild reaction conditions.

The synthesis and characterization of an iron(VII) nitrido complex

Complexes of iron in high oxidation states are captivating research subjects due to their pivotal role as active intermediates in numerous catalytic processes. Structural and spectroscopic studies of well-defined model complexes often provide evidence of these intermediates. In addition to the fundamental molecular and electronic structure insights gained by these complexes, their reactivity also affects our understanding of catalytic reaction mechanisms for small molecule and bond-activation chemistry. Here, we report the synthesis, structural and spectroscopic characterization of a stable, octahedral Fe(VI) nitrido complex and an authenticated, unique Fe(VII) species, prepared by one-electron oxidation. The super-oxidized Fe(VII) nitride rearranges to an Fe(V) imide through an intramolecular amination mechanism and ligand exchange, which is characterized spectroscopically and computationally. This enables combined reactivity and stability studies on a single molecular system of a rare high-valent complex redox pair. Quantum chemical calculations complement the spectroscopic parameters and provide evidence for a diamagnetic (S = 0) d 2 Fe(VI) and a genuine S = 1/2, d 1 Fe(VII) configuration of these super-oxidized nitrido complexes.

Softer Is Better for Titanium: Molecular Titanium Arsenido Anions Featuring Ti≡As Bonding and a Terminal Parent Arsinidene

We introduce the arsenido ligand onto the TiIV ion, yielding a remarkably covalent Ti≡As bond and the parent arsinidene Ti═AsH moiety. An anionic arsenido ligand is assembled via reductive decarbonylation involving the discrete TiII salt [K(cryptand)][(PN)2TiCl] (1) (cryptand = 222-Kryptofix) and Na(OCAs)(dioxane)1.5 in thf/toluene to produce the mixed alkali ate-complex [(PN)2Ti(As)]2(μ2-KNa(thf)2) (2) and the discrete salt [K(cryptand)][(PN)2Ti≡As] (3) featuring a terminal Ti≡As ligand. Protonation of 2 or 3 with various weak acids cleanly forms the parent arsinidene [(PN)2Ti═AsH] (4), which upon deprotonation with KCH2Ph in thf generates the more symmetric anionic arsenido [(PN)2Ti(As){μ2-K(thf)2}]2 (5). Experimental and computational studies suggest the pKa of 4 to be ∼23, and the bond orders in 2, 3, and 5 are all in the range of a Ti≡As triple bond, with decreasing bond order in 4.

Self-Assembled Supported Ionic Liquids

Separation and reuse of the catalytically active metal complexes are persistent issues in homogeneous catalysis. Supported Ionic Liquid Phase (SILP) catalysts, where the catalytic center is dissolved in a thin film of a stable ionic liquid, deposited on a solid support, present a promising alternative. However, the dissolution of the metal center in the film leaves little control over its position and its activity. We present here four novel, task-specific ionic liquids [FPhn ImH R]I (n=1, 2; R=PEG2 , C12 H25 ), designed to self-assemble on a silica surface without any covalent bonding and offering a metal binding site in a controlled distance to the support. Advanced multinuclear solid-state NMR spectroscopic techniques under Magic Angle Spinning, complemented by molecular dynamics (MD) simulations, allow us to determine their molecular conformation when deposited inside SBA-15 as a model silica support. We provide here conceptual proof for a rational design of ionic liquids self-assembling into thin films, opening an avenue for a second, improved generation of SILP catalysts.

Deciphering Iron-Catalyzed C-H Amination with Organic Azides: N2 Cleavage from a Stable Organoazide Complex

Catalytic C-N bond formation by direct activation of C-H bonds offers wide synthetic potential. En route to C-H amination, complexes with organic azides are critical precursors towards the reactive nitrene intermediate. Despite their relevance, α-N coordinated organoazide complexes are scarce in general, and elusive with iron, although iron complexes are by far the most active catalysts for C-H amination with organoazides. Herein, we report the synthesis of a stable iron α-N coordinated organoazide complex from [Fe(N(SiMe3 )2 )2 ] and AdN3 (Ad=1-adamantyl) and its crystallographic, IR, NMR and zero-field 57 Fe Mössbauer spectroscopic characterization. These analyses revealed that the organoazide is in fast equilibrium between the free and coordinated state (Keq =62). Photo-crystallography experiments showed gradual dissociation of N2 , which imparted an Fe-N bond shortening and correspond to structural snapshots of the formation of an iron imido/nitrene complex. Reactivity of the organoazide complex in solution showed complete loss of N2 , and subsequent formation of a C-H aminated product via nitrene insertion into a C-H bond of the N(SiMe3 )2 ligand. Monitoring this reaction by 1 H NMR spectroscopy indicates the transient formation of the imido/nitrene intermediate, which was supported by Mössbauer spectroscopy in frozen solution.

Benzene-1,4-Di(dithiocarboxylate) Linker-Based Coordination Polymers of Mn2+, Zn2+, and Mixed-Valence Fe2+/3

Three new coordination polymers (CPs) constructed from the linker 1,4-di(dithiocarboxylate) (BDDTC2-)─the sulfur-analog of 1,4-benzenedicarboxylate (BDC2-)─together with Mn-, Zn-, and Fe-based inorganic SBUs are reported with description of their structural and electronic properties. Single-crystal X-ray diffraction revealed structural diversity ranging from one-dimensional chains in [Mn(BDDTC)(DMF)2] (1) to two-dimensional (2D) honeycomb sheets observed for [Zn2(BDDTC)3][Zn(DMF)5(H2O)] (2). Gas adsorption experiments confirmed a 3D porous structure for the mixed-valent material [Fe2(BDDTC)2(OH)] (3). 3 contains a 1:1 ratio of Fe2+/3+ ions, as evidenced by 57Fe Mössbauer, X-band EPR, and X-ray absorption spectroscopy. Its empirical formula was established by elemental analysis, thermal gravimetric analysis, infrared vibrational spectroscopy, and X-ray absorption spectroscopy in lieu of elusive single-crystal X-ray diffraction data. In contrast to the Mn- and Zn-based compounds 1 and 2, the Fe2+/3+ CP 3 showed remarkably high electrical conductivity of 5 × 10-3 S cm-1 (according to van der Pauw measurements), which is within the range of semiconducting materials. Overall, our study confirms that sulfur derivatives of typical carboxylate linkers (e.g., BDC) are suitable for the construction of electrically conducting CPs, due to acceptedly higher covalency in metal-ligand bonding compared to the electrically insulating carboxylate CPs or metal-organic frameworks. At the same time, the direct comparison between insulating CPs 1 and 2 with CP 3 emphasizes that the electronic structure of the metal is likewise a crucial aspect to construct electrically conductive materials.

Closed Synthetic Cycle for Nickel-Based Dihydrogen Formation

Dihydrogen evolution was observed in a two-step protonation reaction starting from a Ni0 precursor with a tripodal N-heterocyclic carbene (NHC) ligand. Upon the first protonation, a NiII monohydride complex was formed, which was isolated and fully characterized. Subsequent protonation yields H2 via a transient intermediate (INT) and an isolable NiII acetonitrile complex. The latter can be reduced to regenerate its Ni0 precursor. The mechanism of H2 formation was investigated by using a deuterated acid and scrutinized by 1 H NMR spectroscopy and gas chromatography. Remarkably, the second protonation forms a rare nickel dihydrogen complex, which was detected and identified in solution and characterized by 1 H NMR spectroscopy. DFT-based computational analyses were employed to propose a reaction profile and a molecular structure of the Ni-H2 complex. Thus, a dihydrogen-evolving, closed-synthetic cycle is reported with a rare Ni-H2 species as a key intermediate.

Iron-Catalyzed Intermolecular C-H Amination Assisted by an Isolated Iron-Imido Radical Intermediate

Here we report the use of a base metal complex [(tBu pyrpyrr2 )Fe(OEt2 )] (1-OEt2 ) (tBu pyrpyrr2 2- =3,5-tBu2 -bis(pyrrolyl)pyridine) as a catalyst for intermolecular amination of Csp3 -H bonds of 9,10-dihydroanthracene (2 a) using 2,4,6-trimethyl phenyl azide (3 a) as the nitrene source. The reaction is complete within one hour at 80 °C using as low as 2 mol % 1-OEt2 with control in selectivity for single C-H amination versus double C-H amination. Catalytic C-H amination reactions can be extended to other substrates such as cyclohexadiene and xanthene derivatives and can tolerate a variety of aryl azides having methyl groups in both ortho positions. Under stoichiometric conditions the imido radical species [(tBu pyrpyrr2 )Fe{=N(2,6-Me2 -4-tBu-C6 H2 )] (1-imido) can be isolated in 56 % yield, and spectroscopic, magnetometric, and computational studies confirmed it to be an S = 1 FeIV complex. Complex 1-imido reacts with 2 a to produce the ferrous aniline adduct [(tBu pyrpyrr2 )Fe{NH(2,6-Me2 -4-tBu-C6 H2 )(C14 H11 )}] (1-aniline) in 45 % yield. Lastly, it was found that complexes 1-imido and 1-aniline are both competent intermediates in catalytic intermolecular C-H amination.

Isostructural bridging diferrous chalcogenide cores [FeII(μ-E)FeII] (E = O, S, Se, Te) with decreasing antiferromagnetic coupling down the chalcogenide series

Iron compounds containing a bridging oxo or sulfido moiety are ubiquitous in biological systems, but substitution with the heavier chalcogenides selenium and tellurium, however, is much rarer, with only a few examples reported to date. Here we show that treatment of the ferrous starting material [(^tBupyrpyrr₂)Fe(OEt₂)] (1-OEt₂) (^tBupyrpyrr₂ = 3,5-^tBu₂-bis(pyrrolyl)pyridine) with phosphine chalcogenide reagents E = PR₃ results in the neutral phosphine chalcogenide adduct series [(^tBupyrpyrr₂)Fe(EPR₃)] (E = O, S, Se; R = Ph; E = Te; R = ^tBu) (1-E) without any electron transfer, whereas treatment of the anionic starting material [K]₂[(^tBupyrpyrr₂)Fe₂(μ-N₂)] (2-N₂) with the appropriate chalcogenide transfer source yields cleanly the isostructural ferrous bridging mono-chalcogenide ate complexes [K]₂[(^tBupyrpyrr₂)Fe₂(μ-E)] (2-E) (E = O, S, Se, and Te) having significant deviation in the Fe-E-Fe bridge from linear in the case of E = O to more acute for the heaviest chalcogenide. All bridging chalcogenide complexes were analyzed using a variety of spectroscopic techniques, including ¹H NMR, UV-Vis electronic absorbtion, and ⁵⁷Fe Mössbauer. The spin-state and degree of communication between the two ferrous ions were probed via SQUID magnetometry, where it was found that all iron centers were high-spin (S = 2) Fe^II, with magnetic exchange coupling between the Fe^II ions. Magnetic studies established that antiferromagnetic coupling between the ferrous ions decreases as the identity of the chalcogen is tuned from O to the heaviest congener Te.

Synthesis and Reactivity of a Cobalt-Supported Singlet Nitrene

The synthesis, characterization, and reactivity of a series of cobalt terminal imido complexes supported by an N-anchored tripodal tris(carbene) chelate is described, including a Co-supported singlet nitrene. Reaction of the Co^I precursor [(TIMMN^mes)Co^I](PF₆) (TIMMN^mes = tris-[2-(3-mesityl-imidazolin-2-ylidene)-methyl]amine) with p-methoxyphenyl azide yields a Co^III imide [(TIMMN^mes)Co^III(NAnisole)](PF₆) (1). Treatment of 1 with 1 equiv of [FeCp₂](PF₆) at -35 °C affords a formal Co^IV imido complex [(TIMMN^mes)Co(NAnisole)](PF₆)₂ (2), which features a bent Co-N(imido)-C(Anisole) linkage. Subsequent one-electron oxidation of 2 with 1 equiv of AgPF₆ provides access to the tricationic cobalt imido complex [(TIMMN^mes)Co(NAnisole)](PF₆)₃ (3). All complexes were fully characterized, including single-crystal X-ray diffraction (SC-XRD) analyses, infrared (IR) vibrational, ultraviolet/visible (UV/vis) electronic absorption, multinuclear NMR, X-band electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR), and high-energy-resolution fluorescence-detected X-ray absorption spectroscopy (HERFD XAS). Quantum chemical calculations provide additional insight into the electronic structures of all compounds. The dicationic Co^IV imido complex 2 exhibits a doublet ground state with considerable imidyl character as a result of covalent Co-NAnisole bonding. At room temperature, 2 readily converts to a Co^II amine complex involving intramolecular C-H bond amination. Electronically, tricationic complex 3 can be understood as a singlet nitrene bound to Co^III with significant Co^IV imidyl radical character. Verifying the pronounced electrophilicity, nucleophiles such as H₂O and ^tBuNH₂ add to 3─analogous to the parent free nitrene─in the para position of the aromatic substituent, thus, clearly corroborating singlet nitrene-type reactivity.

Nonaqueous Electrochemistry of Uranium Complexes: A Guide to Structure-Reactivity Tuning

Uranium complexes can be stabilized in a wide range of oxidation states, ranging from U^II to U^VI and a very recent example of a U^I complex. This review provides a comprehensive summary of electrochemistry data reported on uranium complexes in nonaqueous electrolyte, to serve as a clear point of reference for newly synthesized compounds, and to evaluate how different ligand environments influence experimentally observed electrochemical redox potentials. Data for over 200 uranium compounds are reported, together with a detailed discussion of trends observed across larger series of complexes in response to ligand field variations. In analogy to the traditional Lever parameter, we utilized the data to derive a new uranium-specific set of ligand field parameters ^UE_L(L) that more accurately represent metal-ligand bonding situations than previously existing transition metal derived parameters. Exemplarily, we demonstrate ^UE_L(L) parameters to be useful for the prediction of structure-reactivity correlations in order to activate specific substrate targets.

Uranium-Mediated Peroxide Activation and a Precursor toward an Elusive Uranium cis-Dioxo Fleeting Intermediate

The activation of chalcogen-chalcogen bonds using organometallic uranium complexes has been well documented for S-S, Se-Se, and Te-Te bonds. In stark contrast, reports concerning the ability of a uranium complex to activate the O-O bond of an organic peroxide are exceedingly rare. Herein, we describe the peroxide O-O bond cleavage of 9,10-diphenylanthracene-9,10-endoperoxide in nonaqueous media, mediated by a uranium(III) precursor [((^Me,AdArO)₃N)U^III(dme)] to generate a stable uranium(V) bis-alkoxide complex, namely, [((^Me,AdArO)₃N)U^V(DPAP)]. This reaction proceeds via an isolable, alkoxide-bridged diuranium(IV/IV) species, implying that the oxidative addition occurs in two sequential, single-electron oxidations of the metal center, including rebound of a terminal oxygen radical. This uranium(V) bis-alkoxide can then be reduced with KC₈ to form a uranium(IV) complex, which upon exposure to UV light, in solution, releases 9,10-diphenylanthracene to generate a cyclic uranyl trimer through formal two-electron photooxidation. Analysis of the mechanism of this photochemical oxidation via density functional theory (DFT) calculations indicates that the formation of this uranyl trimer occurs through a fleeting uranium cis-dioxo intermediate. At room temperature, this cis-configured dioxo species rapidly isomerizes to a more stable trans configuration through the release of one of the alkoxide ligands from the complex, which then goes on to form the isolated uranyl trimer complex.

Homoleptic Acetylacetonate (acac) and β-Ketoiminate (acnac) Complexes of Uranium

Transmetalation of potassium salts of differently substituted acetylacetonate (acac) and β-ketoiminate (acnac) with [U(I)₃(dioxane)_1.5] and [U(I)₄(dioxane)₂] resulted in the formation of homoleptic, octahedral complexes [U(^tBuacnac^Ph)₃] (with ^tBuacnac^Ph = 2,2,6,6-tetramethyl-5-(phenylimino)heptan-3-onate) in the oxidation states +III and +IV and the homoleptic, square prismatic complexes [U^IV(^Meacnac^Ph)₄] (with ^Meacnac^Ph = 4-(phenylimino)pentan-2-onate) and the homoleptic, square antiprismatic complexes [U(^tBuacac)₄] [with acac = 2,2,6,6-tetramethyl-3,5-heptanedionate (^tBuacac), 2,2,6,6-tetramethyl,4-methyl-3,5-heptanedionate (^tBuac^Meac), and 2,2,6,6-tetramethyl-4-phenyl-3,5-heptanedionate (^tBuac^Phac)] in oxidation states +III, +IV, and +V. Oxidation of [U^III(^tBuacnac^Ph)₃] (1) with AgOTf yielded [U^IV(^tBuacnac^Ph)₃][OTf] (2), which was fully characterized by single-crystal X-ray diffraction analysis, a combination of ultraviolet/visible/near-infrared, nuclear magnetic resonance, and infrared spectroscopies, and solid-state superconducting quantum interference device magnetization studies. Complexation of the sterically less encumbering ligand derivative ^Meacnac^Ph provided access to the tetravalent, square antiprismatic complex [U^IV(^Meacnac^Ph)₄] (3). Cyclovoltammetric analysis of the square antiprismatic [U^IV(^tBuacac)₄] (4), [U^IV(^tBuac^Meac)₄] (5), and [U^IV(^tBuac^Phac)₄] (6) revealed reversible anodic and cathodic waves, attributable to the U(III/IV) and U(IV/V) redox couples, both being chemically accessible, as tested in the case of 5. The corresponding U(III) and U(V) compounds, [K(2.2.2-cryptand)][U^III(^tBuac^Meac)₄] (7) and [U^V(^tBuac^Meac)₄][SbF₆] (8), were synthesized accordingly. Unfortunately, reduced 7 proved to be too reactive for isolation and could only be detected by electron paramagnetic resonance spectroscopy. Notably, electrochemical studies on homoleptic uranium(IV) complexes with differently derivatized (R) ac^Rac ligands (R = H, Me, or Ph) feature large electrochemical windows of up to 2.91 V, measured between the uranium(III) and the uranium(V) species, in addition to high stability toward repeated potential scans.

From Divalent to Pentavalent Iron Imido Complexes and an Fe(V) Nitride via N-C Bond Cleavage

As key intermediates in metal-catalyzed nitrogen-transfer chemistry, terminal imido complexes of iron have attracted significant attention for a long time. In search of versatile model compounds, the recently developed second-generation N-anchored tris-NHC chelating ligand tris-[2-(3-mesityl-imidazole-2-ylidene)-methyl]amine (TIMMN^Mes) was utilized to synthesize and compare two series of mid- to high-valent iron alkyl imido complexes, including a reactive Fe(V) adamantyl imido intermediate en route to an isolable Fe(V) nitrido complex. The chemistry toward the iron adamantyl imides was achieved by reacting the Fe(I) precursor [(TIMMN^Mes)Fe^I(N₂)]⁺ (1) with 1-adamantyl azide to yield the corresponding trivalent iron imide. Stepwise chemical reduction and oxidation lead to the isostructural series of low-spin [(TIMMN^Mes)Fe(NAd)]^0,1+,2+,3+ (2^Ad-5^Ad) in oxidation states II to V. The Fe(V) imide [(TIMMN^Mes)Fe(NAd)]³⁺ (5^Ad) is unstable under ambient conditions and converts to the air-stable nitride [(TIMMN^Mes)Fe^V(N)]²⁺ (6) via N-C bond cleavage. The stability of the pentavalent imide can be increased by derivatizing the nitride [(TIMMN^Mes)Fe^IV(N)]⁺ (7) with an ethyl group using the triethyloxonium salt Et₃OPF₆. This gives access to the analogous series of ethyl imides [(TIMMN^Mes)Fe(NEt)]^0,1+,2+,3+ (2^Et-5^Et), including the stable Fe(V) ethyl imide. Iron imido complexes exist in a manifold of different electronic structures, ultimately controlling their diverse reactivities. Accordingly, these complexes were characterized by single-crystal X-ray diffraction analyses, SQUID magnetization, and electrochemical methods, as well as ⁵⁷Fe Mössbauer, IR vibrational, UV/vis electronic absorption, multinuclear NMR, X-band EPR, and X-ray absorption spectroscopy. Our studies are complemented with quantum chemical calculations, thus providing further insight into the electronic structures of all complexes.

Metal-Ligand Cooperativity to Assemble a Neutral and Terminal Niobium Phosphorus Triple Bond (Nb≡P)

Decarbonylation along with P-atom transfer from the phosphaethynolate anion, PCO^- , to the Nb^IV complex [(PNP)NbCl₂ (N^t BuAr)] (1) (PNP=N[2-Pⁱ Pr₂ -4-methylphenyl]₂ ^- ; Ar=3,5-Me₂ C₆ H₃ ) results in its coupling with one of the phosphine arms of the pincer ligand to produce a phosphanylidene phosphorane complex [(PNPP)NbCl(N^t BuAr)] (2). Reduction of 2 with CoCp*₂ cleaves the P-P bond to form the first neutral and terminal phosphido complex of a group 5 transition metal, namely, [(PNP)Nb≡P(N^t BuAr)] (3). Theoretical studies have been used to understand both the coupling of the P-atom and the reductive cleavage of the P-P bond. Reaction of 3 with a two-electron oxidant such as ethylene sulfide results in a diamagnetic sulfido complex having a P-P coupled ligand, namely [(PNPP)Nb=S(N^t BuAr)] (4).

Iron-Catalyzed Olefin Metathesis: Recent Theoretical and Experimental Advances

The "metathesis reaction" is a straightforward and often metal-catalyzed chemical reaction that transforms two hydrocarbon molecules to two new hydrocarbons by exchange of molecular fragments. Alkane, alkene and alkyne metathesis have become an important tool in synthetic chemistry and have provided access to complex organic structures. Since the discovery of industrial olefin metathesis in the 1960s, many modifications have been reported; thus, increasing scope and improving reaction selectivity. Olefin metathesis catalysts based on high-valent group six elements or Ru(IV) have been developed and improved through ligand modifications. In addition, significant effort was invested to realize olefin metathesis with a non-toxic, bio-compatible and one of the most abundant elements in the earth's crust; namely, iron. First evidences suggest that low-valent Fe(II) complexes are active in olefin metathesis. Although the latter has not been unambiguously established, this review summarizes the key advances in the field and aims to guide through the challenges.

Bis(imidazolium)-1,3-diphosphete-diide: A Building Block for FeC2 P2 Complexes and Clusters

Reaction of the 6π-electron aromatic four-membered heterocycle (IPr)₂ C₂ P₂ (1) (IPr=1,3-bis(2,6-diisopropylphenyl)-1,3-dihydro-2H-imidazol-2-ylidene) with [Fe₂ CO₉ ] gives the neutral iron tricarbonyl complex [Fe(CO)₃ -η³ -{(IPr)₂ C₂ P₂ }] (2). Oxidation with two equivalents of the ferrocenium salt, [Fe(Cp)₂ ](BArF₂₄ ), affords the dicationic tricarbonyl complex [Fe(CO)₃ -η⁴ -{(IPr)₂ C₂ P₂ }](BArF₂₄ )₂ (4). The one-electron oxidation proceeds under concomitant loss of one CO ligand to give the paramagnetic dicarbonyl radical cation complex [Fe(CO)₂ -η⁴ -{(IPr)₂ C₂ P₂ }](BArF₂₄ ) (5). Reduction of 5 allows the preparation of the neutral dicarbonyl complex [Fe(CO)₂ -η⁴ -{(IPr)₂ C₂ P₂ }] (6). An analysis by various spectroscopic techniques (⁵⁷ Fe Mössbauer, EPR) combined with DFT calculations gives insight into differences of the electronic structure within the members of this unique series of iron carbonyl complexes, which can be either described as electron precise or Wade-Mingos clusters.

Unprecedented pairs of uranium (iv/v) hydroxido and (iv/v/vi) oxido complexes supported by a seven-coordinate cyclen-anchored tris-aryloxide ligand

We present the synthesis and reactivity of a newly developed, cyclen-based tris-aryloxide ligand precursor, namely cyclen(Me)( t-Bu,t-BuArOH)3, and its coordination chemistry to uranium. The corresponding uranium(iii) complex [UIII((OAr t-Bu,t-Bu)3(Me)cyclen)] (1) was characterized by 1H NMR analysis, CHN elemental analysis and UV/vis/NIR electronic absorption spectroscopy. Since no single-crystals suitable for X-ray diffraction analysis could be obtained from this precursor, 1 was oxidized with methylene chloride or silver fluoride to yield [(cyclen(Me)( t-Bu,t-BuArO)3)UIV(X)] (X = Cl (2), F (3)), which were unambiguously characterized and successfully crystallized to gain insight into the molecular structure by single-crystal X-ray diffraction analysis (SC-XRD). Further, the activation of H2O and N2O by 1 is presented, resulting in the U(iv) complex [(cyclen(Me)( t-Bu,t-BuArO)3)UIV(OH)] (4) and the U(v) complex [(cyclen(Me)( t-Bu,t-BuArO)3)UV(O)] (6). Complexes 2, 3, 4, and 6 were characterized by 1H NMR analysis, CHN elemental analysis, UV/vis/NIR electronic absorption spectroscopy, IR vibrational spectroscopy, and SQUID magnetization measurements as well as cyclic voltammetry. Furthermore, chemical oxidation of 3, 4, and 6 with AgF or AgSbF6 was achieved leading to complexes [(cyclen(Me)( t-Bu,t-BuArO)3)UV(F)2] (5), [(cyclen(Me)( t-Bu,t-BuArO)3)UV(OH)][SbF6] (7), and [(cyclen(Me)( t-Bu,t-BuArO)3)UVI(O)][SbF6] (8). Finally, reduction of 7 with KC8 yielded a U(iv) complex, spectroscopically and magnetochemically identified as K[(cyclen(Me)( t-Bu,t-BuArO)3)UIV(O)].

Glycated haemoglobin and the association with long-term survival among patients evaluated for stable angina – a prospective Norwegian cohort

Background and methods

Recent guidelines have included glycated haemoglobin (HbA1c) ≥48 mmol/L as a diagnostic criterion for diabetes mellitus (DM) in addition to plasma glucose (PG) concentrations, mainly based on the relationship between hyperglycemia and microvascular disease [1]. However, increased HbA1c may stem not only from hyperglycemia, and the risk association between HbA1c and long-term survival in patients with stable coronary heart disease and HbA1c ≥48 mmol/L but no previous DM according to PG is uncertain. We explored the relationship between HbA1c and survival among patients with and without DM who were evaluated for stable angina in the period 2000–2004. Endpoints were obtained from the Norwegian Cause of Death Registry.

Results

In total, 4164 patients were evaluated by cardiac cathetherization, of whom 576 patients (13.8%) had DM (median HbA1c 55 mmol/L) according to self-report and/or baseline PG concentrations. Of the remaining 3588 patients 1026 had HbA1c ≥48 mmol/L; however, HbA1c did not correlate with the HOMA2 insulin resistance index or fasting PG in these patients. During median (25–75 percentile) follow-up time of 14.0 (12.1–15.4) years a total of 1328 patients (31.9%) died, of whom 582 from cardiovascular causes. In patients with DM according to PG, HbA1c trended towards positive associations with all-cause and CVD mortality when adjusted for age and gender (HRs (95% CIs) 1.13 (0.99–1.28) and 1.16 (0.98–1.39) per 1SD, respectively). However, HbA1c was not associated with survival in either the group of patients without DM and HbA1c &lt;48 mmol/L (median HbA1c 38 mmol/L) (HRs (95% CIs) 0.99 (0.92–1.06) and 0.96 (0.86–1.08) for all-cause and CVD mortality, respectively) or patients without DM but having HbA1c ≥48 mmol/L (median HbA1c 53 mmol/L) (HRs (95% CIs) 0.99 (0.88–1.12) and 1.04 (0.88–1.22)).

Conclusion

In patients evaluated for stable angina pectoris about two decades ago, almost a third of patients with no history of DM according to PG still had HbA1c concentrations indicating DM according to current guidelines. Including these patients in the DM category yielded similar percentages of patients with DM as observed in recent populations with stable coronary disease [2]. However, as opposed to what we observed in patients with DM, HbA1c did not show any association with very long-term survival among patients without DM. Our findings therefore question the use of HbA1c in the diagnosis of DM, especially in terms of risk assessment for longevity among patients with chronic coronary syndrome.

Funding Acknowledgement

Type of funding sources: None.

Inflammation and cardiorespiratory fitness in overweight women and men: the FATCOR study

Background

Women have more body fat compared to men, and adipose tissue is associated with chronic inflammation. Cardiorespiratory fitness has on the other hand been postulated to lower chronic inflammation. However, sex-specific associations of inflammation with cardiorespiratory fitness is less studied.

Purpose

To assess inflammatory markers in overweight and obese women and men according to cardiorespiratory fitness in the FAT associated CardiOvasculaR dysfunction (FATCOR) study.

Methods

Cardiorespiratory fitness was assessed by maximal oxygen uptake (VO2max) by cardiopulmonary exercise testing in 566 subjects (mean age was 48±9 years, 60% women) with body mass index (BMI) &gt;27.0 kg/m2. Participants were grouped according to sex, and fitness status identified from sex and age specific VO2max thresholds. C-reactive protein (CRP) and serum amyloid A (SAA) were analysed using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight mass spectrometry. Serum levels of the kynurenine:tryptophan ratio (KTR) and pyriodoxic acid ratio (PAr) were measured by liquid chromatography tandem mass spectrometry. All inflammatory markers were log transformed before inclusion in linear regression analyses.

Results

In the total study population, 63% had obesity and 74% were cardiorespiratory unfit. Unfit women had the highest fat percentage and the highest serum levels of CRP and SAA compared to the other groups (p&lt;0.05), while serum levels of KTR and PAr were higher only compared to fit men (p&lt;0.05). In multivariable linear regression analyses in women, higher CRP (β −0.15, p=0.001), SAA (β −0.10, p=0.03) and PAr (β −0.09, p=0.03) were associated with lower VO2max after adjusting for age, fat percentage, hypertension and metabolic syndrome. In men, only higher PAr (β −0.14, p=0.02) was associated with lower VO2max in multivariable analyses adjusted for age, fat percentage and metabolic syndrome. In multivariable analyses in obese women only (n=213), higher CRP (β −0.15, p=0.01) and PAr (β −0.13, p=0.03) remained associated with lower VO2max, while in obese men (n=144) there was no significant associations between inflammatory markers and VO2max.

Conclusion

Among overweight subjects participating in the FATCOR study, cardiorespiratory unfit women had the highest serum levels of inflammatory markers. The association of inflammation with reduced cardiorespiratory fitness was more pronounced in women than men, in particular when obesity was present.

Funding Acknowledgement

Type of funding sources: Public grant(s) – National budget only. Main funding source(s): Western Regional Health Authority of Norway

Oxidative Cyclodehydrogenation of Trinaphthylamine: Selective Formation of a Nitrogen-Centered Polycyclic π-System Comprising 5- and 7-Membered Rings

We describe a new type of nitrogen-centered polycyclic scaffold comprising a unique combination of 5-, 6-, and 7-membered rings. The compound is accessible through an intramolecular oxidative cyclodehydrogenation of tri(1-naphthyl)amine. To the best of our knowledge this is the very first example of a direct 3-fold cyclization of a triarylamine under oxidative conditions. The unusual ring fusion motif is confirmed by X-ray crystallography and the impact of cyclization on the electronic and photophysical properties is investigated both experimentally and theoretically based on density-functional theory (DFT) calculations. The formation of the unexpected product is rationalized by detailed mechanistic studies on the DFT level. The results suggest the cyclization to occur under kinetic control via a dicationic mechanism.

Umpolung in a Pair of Cobalt(III) Terminal Imido/Imidyl Complexes

Reaction of the Co^I complex [(TIMMN^mes)Co^I](PF₆) (1) (TIMMN^mes=tris‐[2‐(3‐mesityl‐imidazolin‐2‐ylidene)‐methyl]amine) with mesityl azide yields the Co^III imide [(TIMMN^mes)Co^III(NMes)](PF₆) (2). Oxidation of 2 with [FeCp₂](PF₆) provides access to a rare Co^III imidyl [(TIMMN^mes)Co(NMes)](PF₆)₂ (3). Single‐crystal X‐ray diffractometry and EPR spectroscopy confirm the molecular structure of 3 and its S=1/2 ground state. ENDOR, X‐ray absorption spectroscopy and computational analyses indicate a ligand‐based oxidation; thus, an imidyl‐radical electronic structure for 3. Migratory insertion of one ancillary NHC to the imido ligand in 2 gives the Co^IN‐heterocyclic imine (4) within 12 h. Conversely, it takes merely 0.5 h for 3 to transform to the Co^II congener (5). The migratory insertion in 2 occurs via a nucleophilic attack of the imido ligand at the NHC to give 4, whereas in 3, a nucleophilic attack of the NHC at the electrophilic imidyl ligand yields 5. The reactivity shunt upon oxidation of 2 to 3 confirms an umpolung of the imido ligand.

Synthesis and Characterization of Stable Iron Pentacarbonyl Radical Cation Salts

The open‐shell iron pentacarbonyl cation [Fe(CO)₅]^.+ was isolated by deelectronation, i.e., the single‐electron oxidation of the parent neutral Fe(CO)₅ using [phenazine^F]^.+ as the [Al(OR^F)₄]⁻ and [F‐{Al(OR^F)₃}₂]⁻ salt (R^F=C(CF₃)₃; phenazine^F=perfluoro‐5,10‐bis(perfluorophenyl)‐5,10‐dihydrophenazine). [Fe(CO)₅]^.+[Al(OR^F)₄]⁻ was fully characterized (scXRD analysis, IR, NMR, EPR, ⁵⁷Fe spectroscopy, CV and SQUID magnetization study) and, apart from being a compound of fundamental interest, may serve as a precursor for low‐valent iron coordination chemistry.

Tale of Three Molecular Nitrides: Mononuclear Vanadium (V) and (IV) Nitrides As Well As a Mixed-Valence Trivanadium Nitride Having a V3N4 Double-Diamond Core

Transmetallation of [VCl₃(THF)₃] and [TlTp^tBu,Me] afforded [(Tp^tBu,Me)VCl₂] (1, Tp^tBu,Me = hydro-tris(3-tert-butyl-5-methylpyrazol-1-yl)borate), which was reduced with KC₈ to form a C_3v symmetric V^II complex, [(Tp^tBu,Me)VCl] (2). Complex 1 has a high-spin (S = 1) ground state and displays rhombic high-frequency and -field electron paramagnetic resonance (HFEPR) spectra, while complex 2 has an S = 3/2 ⁴A₂ ground state observable by conventional EPR spectroscopy. Complex 1 reacts with NaN₃ to form the V^V nitride-azide complex [(Tp^tBu,Me)V≡N(N₃)] (3). A likely V^III azide intermediate en route to 3, [(Tp^tBu,Me)VCl(N₃)] (4), was isolated by reacting 1 with N₃SiMe₃. Complex 4 is thermally stable but reacts with NaN₃ to form 3, implying a bis-azide intermediate, [(Tp^tBu,Me)V(N₃)₂] (A), leading to 3. Reduction of 3 with KC₈ furnishes a trinuclear and mixed-valent nitride, [{(Tp^tBu,Me)V}₂(μ₄-VN₄)] (5), conforming to a Robin-Day class I description. Complex 5 features a central vanadium ion supported only by bridging nitride ligands. Contrary to 1, complex 2 reacts with NaN₃ to produce an azide-bridged dimer, [{(Tp^tBu,Me)V}₂(1,3-μ₂-N₃)₂] (6), with two antiferromagnetically coupled high-spin V^II ions. Complex 5 could be independently produced along with [(κ₂-Tp^tBu,Me)₂V] upon photolysis of 6 in arene solvents. The putative {V^IV≡N} intermediate, [(Tp^tBu,Me)V≡N] (B), was intercepted by photolyzing 6 in a coordinating solvent, such as tetrahydrofuran (THF), yielding [(Tp^tBu,Me)V≡N(THF)] (B-THF). In arene solvents, B-THF expels THF to afford 5 and [(κ₂-Tp^tBu,Me)₂V]. A more stable adduct (B-OPPh₃) was prepared by reacting B-THF with OPPh₃. These adducts of B are the first neutral and mononuclear V^IV nitride complexes to be isolated.

A New Class of Task‐Specific Imidazolium Salts and Ionic Liquids and Their Corresponding Transition‐Metal Complexes for Immobilization on Electrochemically Active Surfaces

Adding to the versatile class of ionic liquids, we report the detailed structure and property analysis of a new class of asymmetrically substituted imidazolium salts, offering interesting thermal characteristics, such as liquid crystalline behavior, polymorphism or glass transitions. A scalable general synthetic procedure for N‐polyaryl‐N’‐alkyl‐functionalized imidazolium salts with para‐substituted linker (L) moieties at the aryl chain, namely [LPh_mIm^HR]⁺ (L=Br, CN, SMe, CO₂Et, OH; m=2, 3; R=C₁₂, PEG_n; n=2, 3, 4), was developed. These imidazolium salts were studied by single‐crystal X‐ray diffraction (SC‐XRD), NMR spectroscopy and thermochemical methods (DSC, TGA). Furthermore, these imidazolium salts were used as N‐heterocyclic carbene (NHC) ligand precursors for mononuclear, first‐row transition metal complexes (Mn^II, Fe^II, Co^II, Ni^II, Zn^II, Cu^I, Ag^I, Au^I) and for the dinuclear Ti‐supported Fe‐NHC complex [(OPy)₂Ti(OPh₂ImC₁₂)₂(FeI₂)] (OPy=pyridin‐2‐ylmethanolate). The complexes were studied concerning their structural and magnetic behavior via multi‐nuclear NMR spectroscopy, SC‐XRD analyses, variable temperature and field‐dependent (VT‐VF) SQUID magnetization methods, X‐band EPR spectroscopy and, where appropriate, zero‐field ⁵⁷Fe Mössbauer spectroscopy.

Ir(IV) Sulfoxide-Pincer Complexes by Three-Electron Oxidative Additions of Br2 and I2. Unprecedented Trap-Free Reductive Elimination of I2 from a formal d5 Metal

Oxidative addition of 1.5 equiv of bromine or iodine to a Ir(I) sulfoxide pincer complex affords the corresponding Ir(IV) tris-bromido or tris-iodido complexes, respectively. The unprecedented trap-free reductive elimination of iodine from the Ir(IV)-iodido complex is induced by coordination of ligands or donor solvents. In the case of added I^-, the isostructural tris-iodo Ir(III)-ate complex is quickly generated, which then can be readily reoxidized to the Ir(IV)-iodido complex with FcPF₆ or electrochemically. DFT calculations indicate an "inverted ligand field" in the Ir(IV) complexes and favor dinuclear pathways for the reductive elimination of iodine from the formal d⁵ metal center.

Iron(II) Mediated Deazotation of Benzyl Azide: Trapping and Subsequent Transformations of the Benzaldimine Fragment

The mono-benzaldimine (HN═CHPh) complex [(^tBupyrpyrr₂)Fe(HN═CHPh)] (1-HN═CHPh) has been prepared by reaction of [(^tBupyrpyrr₂)Fe(OEt₂)] (1-OEt₂) (^tBupyrpyrr₂ = 2,6-bis(3,5-di-tert-butyl-pyrrolyl)pyridine) with one equivalent of benzyl azide. Compound 1-HN═CHPh retains the cis-divacant octahedral coordination geometry akin to 1, as established by single crystal X-ray diffraction study. A bis-HN═CHPh complex [(^tBupyrpyrr₂)Fe(HN═CHPh)₂] (2) was also prepared by the addition of two equivalents of benzyl azide to 1, and its molecular structure exhibits the two HN═CHPh ligands coordinated trans to each other, thereby forming a square pyramidal coordination geometry at the Fe^II center. Reaction of 1 with excess benzyl azide yields [(^tBupyrpyrr₂)Fe(HN═CHPh)₂·PhCHNCH(NH₂)Ph] (2-PhCHNCH(NH₂)Ph), which contains an unstable benzylideneamino phenyl methanamine fragment, effectively hydrogen bonded to 2. Thermolysis of 2 or 2-PhCHNCH(NH₂)Ph releases the HN═CHPh self-coupling products hydrobenzamide (A), N-benzylidine benzylamine (B), and benzonitrile (C). Under catalytic conditions, free HN═CHPh (cis/trans-HN═CHPh mixture) is produced using 2.5 mol % of 1 in 90% spectroscopic yield. These studies provide a clearer understanding for the conversion of the HN═CHPh in 2 or 2-PhCHNCH(NH₂)Ph to the C-C and C-N coupled products. Reduction of 1-HN═CHPh with KC₈ yields the reductively coupled benzylamide complex [K(OEt₂)]₂[(^tBupyrpyrr₂)₂Fe₂(μ₂-NHCHPhCHPhNH)] (3) as the result of a new C-C bond formed between two radical benzylamide fragments.

A bis(silylene)pyridine pincer ligand can stabilize mononuclear manganese(0) complexes: facile access to isolable analogues of the elusive d7-Mn(CO)5 radical

Using the potentially tridentate N,N′-bis(N-heterocyclic silylene)pyridine [SiNSi] pincer-type ligand, 2,6-N,N′-diethyl-bis[N,N′-di-tert-butyl(phenylamidinato)silylene] diaminopyridine, led to the first isolable bis(silylene)pyridine-stabilized manganese(0) complex, {κ³-[SiNSi]Mn(dmpe)} 4 (dmpe = (Me₂P)₂C₂H₄), which represents an isolobal 17 VE analogue of the elusive Mn(CO)₅ radical. The compound is accessible through the reductive dehalogenation of the corresponding dihalido (SiNSi)Mn(ii) complexes 1 (Cl) and 2 (Br) with potassium graphite. Exposing 4 towards the stronger π-acceptor ligands CO and 2,6-dimethylphenyl isocyanide afforded the related Mn(0) complexes κ²-[SiNSi]Mn(CO)₃ (5) and κ³-[SiNSi]Mn(CNXylyl)₂(κ¹-dmpe) (6), respectively. Remarkably, the stabilization of Mn(0) in the coordination sphere of the [SiNSi] ligand favors the d⁷ low-spin electronic configuration, as suggested by EPR spectroscopy, SQUID measurements and DFT calculations. The suitability of 4 acting as a superior pre-catalyst in regioselective hydroboration of quinolines has also been demonstrated.

An isolable bis(silylene)pyridine stabilized manganese(0) complex {κ³-[SiNSi]Mn(dmpe)}, isolobal to elusive Mn(CO)₅ radical has been synthesized and fully characterised.

An Iron-Mesoionic Carbene Complex for Catalytic Intramolecular C-H Amination Utilizing Organic Azides

The synthesis of N-heterocycles is of paramount importance for the pharmaceutical industry. They are often synthesized through atom economic and environmentally unfriendly methods, generating significant waste. A less explored, but greener, alternative is the synthesis through the direct intramolecular C-H amination utilizing organic azides. Few examples exist by using this method, but many are limited due to the required use of stoichiometric amounts of Boc₂O. Herein, we report a homoleptic C,O-chelating mesoionic carbene-iron complex, which is the first iron-based complex that does not require the addition of any protecting groups for this transformation and that is active also in strong donor solvents such as THF or even DMSO. The achieved turnover number is an order of magnitude higher than any other reported catalytic system. A variety of C-H bonds were activated, including benzylic, primary, secondary, and tertiary. By following the reaction over time, we determined the presence of an initiation period. Kinetic studies showed a first-order dependence on substrate concentration and half-order dependence on catalyst concentration. Intermolecular competition reactions with deuterated substrate showed no KIE, while separate reactions with deuterium-labeled substrate resulted in a KIE of 2.0. Moreover, utilizing deuterated substrate significantly decreased the initiation period of the catalysis. Preliminary mechanistic studies suggest a unique mechanism involving a dimeric iron species as the catalyst resting state.

Electrocatalytic Hydrogen Evolution by Cobalt Complexes with a Redox Non-Innocent Polypyridine Ligand

Novel cobalt and zinc complexes with the tetradentate ppq (8-(1″,10″-phenanthrol-2″-yl)-2-(pyrid-2'-yl)quinoline) ligand have been synthesized and fully characterized. Electrochemical measurements have shown that the formal monovalent complex [Co(ppq)(PPh₃)]⁺ (2) undergoes two stepwise ligand-based electroreductions in DMF, affording a [Co(ppq)DMF]^-1 species. Theoretical calculations have described the electronic structure of [Co(ppq)DMF]^-1 as a low-spin Co(II) center coupling with a triple-reduced ppq radical ligand. In the presence of triethylammonium as the proton donor, the cobalt complex efficiently drives electrocatalytic hydrogen evolution with a maximum turnover frequency of thousands per second. A mechanistic investigation proposes an EECC H₂-evolving pathway, where the second ligand-based redox process (E), generating the [Co(ppq)DMF]^-1 intermediate, initiates proton reduction, and the second proton transfer process (C) is the rate-determining step. This work provides a unique example for understanding the role of redox-active ligands in electrocatalytic H₂ evolution by transition metal sites.

Evaluation of Manganese Cubanoid Clusters for Water Oxidation Catalysis: From Well-Defined Molecular Coordination Complexes to Catalytically Active Amorphous Films

With a view to developing multimetallic molecular catalysts that mimic the oxygen-evolving catalyst (OEC) in Nature's photosystem II, the synthesis of various dicubanoid manganese clusters is described and their catalytic activity investigated for water oxidation in basic, aqueous solution. Pyridinemethanol-based ligands are known to support polynuclear and cubanoid structures in manganese coordination chemistry. The chelators 2,6-pyridinedimethanol (H₂ L¹ ) and 6-methyl-2-pyridinemethanol (HL² ) were chosen to yield polynuclear manganese complexes; namely, the tetranuclear defective dicubanes [Mn^II ₂ Mn^III ₂ (HL¹ )₄ (OAc)₄ (OMe)₂ ] and [Mn^II ₂ Mn^III ₂ (HL¹ )₆ (OAc)₂ ] (OAc)₂ ⋅2 H₂ O, as well as the octanuclear-dicubanoid [Mn^II ₆ Mn^III ₂ (L² )₄ (O)₂ (OAc)₁₀ (HOMe/OH₂ )₂ ]⋅3MeOH⋅MeCN. In freshly prepared solutions, polynuclear species were detected by electrospray ionization mass spectrometry, whereas X-band electron paramagnetic resonance studies in dilute, liquid solution suggested the presence of divalent mononuclear Mn species with g values of 2. However, the magnetochemical investigation of the complexes' solutions by the Evans technique confirmed a haphazard combination of manganese coordination complexes, from mononuclear to polynuclear species. Subsequently, the newly synthesized and characterized manganese molecular complexes were employed as precursors to prepare electrode-deposited films in a buffer-free solution to evaluate and compare their stability and catalytic activity for water oxidation electrocatalysis.

Electronic Structure and Magnetic Properties of a Low-Spin CrII Complex: trans-[CrCl2(dmpe)2] (dmpe = 1,2-Bis(dimethylphosphino)ethane)

Octahedral coordination complexes of the general formula trans-[MX₂(R₂ECH₂CH₂ER₂)₂] (M^II = Ti, V, Cr, Mn; E = N, P; R = alkyl, aryl) are a cornerstone of both coordination and organometallic chemistry, and many of these complexes are known to have unique electronic structures that have been incompletely examined. The trans-[CrCl₂(dmpe)₂] complex (dmpe = Me₂PCH₂CH₂PMe₂), originally reported by Girolami and co-workers in 1985, is a rare example of a six-coordinate d⁴ system with an S = 1 (spin triplet) ground state, as opposed to the high-spin (S = 2, spin quintet) state. The ground-state properties of S = 1 systems are challenging to study using conventional spectroscopic methods, and consequently, the electronic structure of trans-[CrCl₂(dmpe)₂] has remained largely unexplored. In this present work, we have employed high-frequency and -field electron paramagnetic resonance (HFEPR) spectroscopy to characterize the ground-state electronic structure of trans-[CrCl₂(dmpe)₂]. This analysis yielded a complete set of spin Hamiltonian parameters for this S = 1 complex: D = +7.39(1) cm^-1, E = +0.093(1) (E/D = 0.012), and g = [1.999(5), 2.00(1), 2.00(1)]. To develop a detailed electronic structure description for trans-[CrCl₂(dmpe)₂], we employed both classical ligand-field theory and quantum chemical theory (QCT) calculations, which considered all quintet, triplet, and singlet ligand-field states. While the high density of states suggests an unexpectedly complex electronic structure for this "simple" coordination complex, both the ligand-field and QCT methods were able to reproduce the experimental spin Hamiltonian parameters quite nicely. The QCT computations were also used as a basis for assigning the electronic absorption spectrum of trans-[CrCl₂(dmpe)₂] in toluene.

Uranium Going the Soft Way: Low-Valent Uranium(III) Coordinated to an Arene-Anchored Tris-Thiophenolate Ligand

The synthesis of a tripodal, S-based ligand, namely the mesitylene-anchored, tris-thiophenolate-functionalized (mes(^Me,AdArS)₃)^3- (1)^3-, and its coordination chemistry with low-valent uranium to form [U^III((SAr^Ad,Me)₃mes)] (1-U) are reported. Single-crystal X-ray diffraction analysis reveals a C₃-symmetric molecular structure. Full characterization of 1-U was performed using nuclear magnetic resonance, UV-vis-NIR electronic absorption, and electron paramagnetic resonance spectroscopies as well as SQUID magnetometry, thus confirming the U(III) oxidation state. Alternating current magnetic studies show that 1-U exhibits single-molecule magnet behavior at low temperatures in a non-zero external field. Comparison of these results to those of the previously reported mesitylene-anchored complexes, [U^III((OAr^Ad,Me)₃mes)] and [U^III((OAr^tBu,tBu)₃mes)], indicates a drastic change in the electronic structure when moving from phenolate-based ligands to thiophenolate-based 1, which is further discussed by means of computational analysis (NBO, DFT, and QTAIM). Despite the U-O bonds being stronger, a much higher covalency was found for the U-S analogue.