Characterization of heat-set gels from RuBisCO in comparison to those from other proteins

Development of plant-based whole egg analogs using emulsion technology

RuBisCO is a plant protein that can be derived from abundant and sustainable natural resources (such as duckweed), which can be used as both an emulsifying and gelling agent. Consequently, it has the potential to formulate emulsion gels that can be used for the development of plant-based replacements of whole eggs. In this study, we investigated the ability of RuBisCO-based emulsion gels to mimic the desirable properties of whole eggs. The emulsion gels contained 12.5 wt% RuBisCO and 10 wt% corn oil to mimic the macronutrient composition of real whole eggs. Initially, an oil-in-water emulsion was formed, which was then heated to convert it into an emulsion gel. The impact of oil droplet diameter (∼15, 1, and 0.2 μm) on the physicochemical properties of the emulsion gels was investigated. The lightness and hardness of the emulsion gels increased as the droplet size decreased, which meant that their appearance and texture could be modified by controlling droplet size. Different concentrations of curcumin (3, 6, and 9 mg/g oil) were incorporated into the emulsions using a pH-driven approach. The curcumin was used as a natural dual functional ingredient (colorant and nutraceutical). The yellow-orange color of curcumin allowed us to match the appearance of raw and cooked whole eggs. This study shows that whole egg analogs can be formulated using plant-based emulsion gels containing natural pigments.

The Application of Protein Concentrate Obtained from Green Leaf Biomass in Structuring Nanofibers for Delivery of Vitamin B12

Nanofibers made of natural proteins have caught the increasing attention of food scientists because of their edibility, renewability, and possibility for various applications. The objective of this study was to prepare nanofibers based on pumpkin leaf protein concentrate (LPC) as a by-product from some crops and gelatin as carriers for vitamin B12 using the electrospinning technique. The starting mixtures were analyzed in terms of viscosity, density, surface tension, and electrical conductivity. Scanning electron micrographs of the obtained nanofibers showed a slight increase in fiber average diameter with the addition of LPC and vitamin B12 (~81 nm to 109 nm). Fourier transform infrared spectroscopy verified the physical blending of gelatin and LPC without phase separation. Thermal analysis showed the fibers had good thermal stability up to 220 °C, highlighting their potential for food applications, regardless of the thermal processing. Additionally, the newly developed fibers have good storage stability, as detected by low water activity values ranging from 0.336 to 0.376. Finally, the release study illustrates the promising sustained release of vitamin B12 from gelatin-LPC nanofibers, mainly governed by the Fickian diffusion mechanism. The obtained results implied the potential of these nanofibers in the development of functional food products with improved nutritional profiles.

Novel animal product substitutes: A new category of plant-based alternatives to meat, seafood, egg, and dairy products

Many consumers are adopting plant-centric diets to address the adverse effects of livestock production on the environment, health, and animal welfare. Processed plant-based foods, including animal product analogs (such as meat, seafood, egg, or dairy analogs) and traditional animal product substitutes (such as tofu, seitan, or tempeh), may not be desirable to a broad spectrum of consumers. This article introduces a new category of plant-based foods specifically designed to overcome the limitations of current animal product analogs and substitutes: novel animal product substitutes (NAPS). NAPS are designed to contain high levels of nutrients to be encouraged (such as proteins, omega-3 fatty acids, dietary fibers, vitamins, and minerals) and low levels of nutrients to be discouraged (such as salt, sugar, and saturated fat). Moreover, they may be designed to have a wide range of appearances, textures, mouthfeels, and flavors. For instance, they could be red, orange, green, yellow, blue, or beige; they could be spheres, ovals, cubes, or pyramids; they could be hard/soft or brittle/pliable; and they could be lemon, thyme, curry, or chili flavored. Consequently, there is great flexibility in creating NAPS that could be eaten in situations where animal products are normally consumed, for example, with pasta, rice, potatoes, bread, soups, or salads. This article reviews the science behind the formulation of NAPS, highlights factors impacting their appearance, texture, flavor, and nutritional profile, and discusses methods that can be used to formulate, produce, and characterize them. Finally, it stresses the need for further studies on this new category of foods, especially on their sensory and consumer aspects.

In vitro protein digestibility of RuBisCO from alfalfa obtained from different processing histories: Insights from free N-terminal and mass spectrometry study

Ribulose-1,5-bisphosphate-carboxylase/oxygenase (RuBisCO) from alfalfa is a potentially climate-friendly alternative protein with a promising amino acid composition. The balance between yield and purity is a challenge for alternative plant proteins, partly due to the naturally occurring antinutrients. Therefore, measuring the in vitro protein digestibility (IVPD) of RuBisCO with various purity levels is of interest. It was hypothesized that the digestibility of RuBisCO from alfalfa might vary with different processing histories and levels of refinement. To test this hypothesis, RuBisCO from alfalfa with 4 different processing histories were subjected to the INFOGEST IVPD protocol and measurement of free N-terminals and peptidomics. The result showed that the digestibility of RuBisCO was high regardless of the processing history and purity, as demonstrated by 77-99% sequence coverage in the gastric phase. In intestinal phase, increase of free N-terminals and lower sequence coverage (< 10%) indicated that the proteins were hydrolyzed to smaller peptides.

Lupin protein-stabilized oil droplets contribute to structuring whey protein emulsion-filled gels

This work aimed to understand the role of lupin protein or mixed lupin-whey protein stabilized oil droplets on the texture and microstructure of a heat-induced whey protein gel. Protein-stabilized emulsions were compared to surfactant-stabilized emulsions to investigate the potential of their interfacial interactions to impart unique structures in the filled gels. The structure development was followed in situ using rheology and the final heat-induced gels were characterized by small and large amplitude oscillatory rheology and confocal microscopy. The development of the gel modulus as well as the final gel properties were linked to the type of interactions between the whey protein matrix and the protein adsorbed at the oil interface. The final gels were selectively dissolved in various buffers, and the results showed that replacing interfacial whey protein with lupin protein resulted in a reduced amount of disulfide bridges, explaining the softer gel in the lupin containing gels compared to those with whey protein. Non-covalent interactions were the main forces involved in the formation of actively filled droplets in the gel network. This work demonstrated that by modulating the interfacial composition of the oil droplets, differing gel structures could be achieved due to differences in the protein-protein interactions between the continuous and the interfacial phase. There is therefore potential for the development of innovative products using lupin-whey protein mixtures, by careful control of the processing steps and the matrix composition.

Alternative methods for RuBisCO extraction from sugar beet waste: A comparative approach of ultrasound and high voltage electrical discharge

Ultrasound (US) and high voltage electric discharge (HVED) with water as a green solvent represent promising novel non-thermal techniques for protein extraction from sugar beet (Beta vulgaris subsp. vulgaris var. altissima) leaves. Compared to HVED, US proved to be a better alternative method for total soluble protein extraction with the aim of obtaining high yield of ribulose-1,5-bisphosphate carboxylase-oxygenase enzyme (RuBisCO). Regardless of the solvent temperature, the highest protein yields were observed at 100% amplitude and 9 min treatment time (84.60 ± 3.98 mg/gd.m. with cold and 96.75 ± 4.30 mg/gd.m. with room temperature deionized water). US treatments at 75% amplitude and 9 min treatment time showed the highest abundance of RuBisCO obtained by immunoblotting assay. The highest protein yields recorded among HVED-treated samples were observed at a voltage of 20 kV and a treatment time of 3 min, disregarding the used gas (33.33 ± 1.06 mg/gd.m. with argon and 34.89 ± 1.59 mg/gd.m. with nitrogen as injected gas), while the highest abundance of the RuBisCO among HVED-treated samples was noticed at 25 kV voltage and 3 min treatment time. By optimizing the US and HVED parameters, it is possible to affect the solubility and improve the isolation of RuBisCO, which could then be purified and implemented into new or already existing functional products.

Post pH-driven encapsulation of polyphenols in next-generation foods: principles, formation and applications

To meet the needs of a growing global population (∼10 billion by 2050), there is an urgent demand for sustainable, healthy, delicious, and affordable next-generation foods. Natural polyphenols, which are abundant in edible plants, have emerged as promising food additives due to their potential health benefits. However, incorporating polyphenols into food products presents various challenges, including issues related to crystallization, low water-solubility, limited bioavailability, and chemical instability. pH-driven or pH-shifting approaches have been proposed to incorporate polyphenols into the delivery systems. Nevertheless, it is unclear whether they can be generally used for the encapsulation of polyphenols into next-generation foods. Here, we highlight a post pH-driven (PPD) approach as a viable solution. The PPD approach inherits several advantages, such as simplicity, speed, and environmental friendliness, as it eliminates the need for heat, organic solvents, and complex equipment. Moreover, the PPD approach can be widely applied to different polyphenols and food systems, enhancing its versatility while also potentially contributing to reducing food waste. This review article aims to accelerate the implementation of the PPD approach in the development of polyphenol-fortified next-generation foods by providing a comprehensive understanding of its fundamental principles, encapsulation techniques, and potential applications in plant-based foods.

Optimization of Water Lentil (Duckweed) Leaf Protein Purification: Identification, Structure, and Foaming Properties

Water lentil, commonly known as duckweed, is an aquatic plant with great agronomic potential, as it can double its biomass in less than 24 h and contains up to 45% leaf proteins on a dry matter basis. However, extracting proteins from leaves is an arduous process due to the complexity of the matrix, which limits their uses in the food industry. In this study, water lentil protein extraction by solubilization was maximized using response surface methodology. By heating at 80 °C at pH 11 with a water lentil powder concentration of 2% or 4% for 2 h, up to 77.8% of total proteins were solubilized. Then, by precipitating the solubilized proteins at pH 4, a protein purity of 57.6% combined with a total protein yield of 60.0% was achieved. To the best of our knowledge, this is the highest leaf protein extraction yield reported in the literature with such protein purity. Proteomics analyses showed that the protein concentrate was composed of around 85.0% RubisCO, and protein structure analyses using ATR-FTIR and DSC were linked to a high protein solubility in water at pH 7. Moreover, a 1.5% protein solution of the protein concentrate at pH 7 showed excellent foaming properties compared to a 10.3% protein egg white solution. It had a superior foaming capacity (194% vs. 122%, respectively) for the same foaming stability after 60 min, which confirms water lentil proteins' potential for human nutrition and food formulation.

Ultrasonic treatment combined with curdlan improves the gelation properties of low-salt Nemipterus virgatus surimi

In this study, the gel properties of ultrasonic alone, curdlan treatment alone, and the combination of both at low-salt surimi levels were investigated, mainly in terms of textural properties, water holding capacity, water distribution, dynamic rheology, protein secondary structure, microstructure and correlation analysis. The results showed that the springiness, gel strength, water holding capacity and energy storage modulus (G') of the low-salt surimi gels without ultrasonic or curdlan treatment were lower than those of the high-salt concentration surimi gels. Compared with the 1 % low-salt group, the ultrasonic treatment combination with curdlan resulted in a significant improvement (p < 0.05) in the texture, water holding capacity and energy storage modulus (G') of the low-salt surimi at the same salt concentration. The gel strength increased significantly from 3386.360 g·mm to 5457.203 g·mm, but there was no significant improvement in whiteness (p > 0.05). In addition, ultrasonic treatment combined with curdlan promoted the shift of the α-helix to the random coil and the β-turn angle shift, thus exposing the internal groups, enhancing protein intermolecular interactions, and promoting the orderly aggregation of proteins, resulting in a microstructure of dense, and obtained the lowest porosity of 14.534 %. The present study might be necessary for promoting the high-value use of aquatic surimi products and the development of low-salt foods.

Preparation of plant-based meat analogs using emulsion gels: Lipid-filled RuBisCo protein hydrogels

RuBisCo from duckweed is a sustainable source of plant proteins with a high water-solubility and good gelling properties. In this study, we examined the impact of RuBisCo concentration (9-33 wt %) and oil droplet concentration (0 to 14 wt %) on the properties of emulsion gels designed to simulate the properties of chicken breast. The color (L*a*b*), water holding capacity (WHC), textural profile analysis, shear modulus, and microstructure of the emulsion gels were measured. The gel hardness and WHC increased significantly with increasing protein concentration, reaching values equivalent to chicken breast. The lightness of the emulsion gels was less than that of chicken breast, due to the presence of pigments (such as polyphenols) in the protein. Shear modulus versus temperature measurements showed that gelation began when the protein solutions were heated to around 40 °C and then the gels hardened appreciably when the temperature was further raised to 90 °C. The shear modulus of the gels then increased during cooling, which was attributed to the strengthening of hydrogen bonds at lower temperatures. The hardness of the gels increased slightly but then decreased when the oil droplet concentration was raised from 0 to 14 %. The lightness of the protein gels increased after adding the oil droplets, which was attributed to increased light scattering. Microstructure analysis showed that the RuBisCo proteins formed a particulate gel after heating, with the oil droplets being in the interstices between the particulates. In summary, RuBisCo proteins can be dissolved at high concentrations and can form strong emulsion gels. Consequently, they may be able to mimic the composition and textural attributes of real chicken.

The role of plant age and leaf position on protein extraction and phenolic compounds removal from tomato (Solanum lycopersicum) leaves using food-grade solvents

The large availability and considerable amount of proteins (approx. 30 % on dry matter) make tomato leaves attractive as a potential new protein source. In this study, the feasibility of extracting proteins and removing phenolic compounds from tomato leaves using food-grade solvents as function of plant age and leaf position was investigated. Water and 50-50 % ethanol-water were used. We found that most proteins (>70 mg/g leaf protein) remained in the pellet after extraction. The protein purity of the dry matter present in the supernatant did not exceed the original leaf protein content. Additionally, leaf position had stronger effect than plant age on the leaf protein content and extraction yield. Ethanol-water was more efficient in removing phenolic compounds than water. The most phenolic compounds was removed from the top leaves. For future processing, the diversity of leaves has to be considered when striving for full utilization of tomato plants (fruits and leaves).

Current Status and Nutritional Value of Green Leaf Protein

Green leaf biomass is one of the largest underutilized sources of nutrients worldwide. Whether it is purposely cultivated (forage crops, duckweed) or upcycled as a waste stream from the mass-produced agricultural crops (discarded leaves, offcuts, tops, peels, or pulp), the green biomass can be established as a viable alternative source of plant proteins in food and feed processing formulations. Rubisco is a major component of all green leaves, comprising up to 50% of soluble leaf protein, and offers many advantageous functional features in terms of essential amino acid profile, reduced allergenicity, enhanced gelation, foaming, emulsification, and textural properties. Nutrient profiles of green leaf biomass differ considerably from those of plant seeds in protein quality, vitamin and mineral concentration, and omega 6/3 fatty acid profiles. Emerging technological improvements in processing fractions, protein quality, and organoleptic profiles will enhance the nutritional quality of green leaf proteins as well as address scaling and sustainability challenges associated with the growing global demand for high quality nutrition.

Protein-protein interactions explain the temperature-dependent viscoelastic changes occurring in colloidal protein gels

Denaturation of protein solutions can be induced by higher temperatures and the presence of non-polar organic solutions. The denatured proteins form aggregates and gels through protein interactions occurring between their amino acid side chains. Depending on the involved side chains, the denaturation conditions lead to different gel properties. As model systems, a variety of food proteins were gelled through different mechanisms to cover a whole range of protein-protein interactions. Especially the temperature dependence of the viscoelastic properties in a simple rheometer method was found to be very different. These differences could be explained by the different thermodynamic properties of the involved protein-protein interactions. Electrostatic interactions were shown to weaken the resulting gel upon temperature increase whereas entropically driven interactions such as hydrophobic or covalent links were strengthened with increased temperatures. A proposed model explaining these results can be used to assess protein interactions in hydrogels in a non-invasive way and could also have applications to describe the temperature behavior of other hydrogels.

Green Biomass-Based Protein for Sustainable Feed and Food Supply: An Overview of Current and Future Prospective

It is necessary to develop and deploy novel protein production to allow the establishment of a sustainable supply for both humans and animals, given the ongoing expansion of protein demand to meet the future needs of the increased world population and high living standards. In addition to plant seeds, green biomass from dedicated crops or green agricultural waste is also available as an alternative source to fulfill the protein and nutrient needs of humans and animals. The development of extraction and precipitation methods (such as microwave coagulation) for chloroplast and cytoplasmic proteins, which constitute the bulk of leaf protein, will allow the production of leaf protein concentrates (LPC) and protein isolates (LPI). Obtained LPC serves as a sustainable alternative source of animal-based protein besides being an important source of many vital phytochemicals, including vitamins and substances with nutritional and pharmacological effects. Along with it, the production of LPC, directly or indirectly, supports sustainability and circular economy concepts. However, the quantity and quality of LPC largely depend on several factors, including plant species, extraction and precipitation techniques, harvest time, and growing season. This paper provides an overview of the history of green biomass-derived protein from the early green fodder mill concept by Károly Ereky to the state-of-art of green-based protein utilization. It highlights potential approaches for enhancing LPC production, including dedicated plant species, associated extraction methods, selection of optimal technologies, and best combination approaches for improving leaf protein isolation.

Is now the time for a Rubiscuit or Ruburger? Increased interest in Rubisco as a food protein

Much of the research on Rubisco aims at increasing crop yields, with the ultimate aim of increasing plant production to feed an increasing global population. However, since the identification of Rubisco as the most abundant protein in leaf material, it has also been touted as a direct source of dietary protein. The nutritional and functional properties of Rubisco are on a par with those of many animal proteins, and are superior to those of many other plant proteins. Purified Rubisco isolates are easily digestible, nutritionally complete, and have excellent foaming, gelling, and emulsifying properties. Despite this potential, challenges in efficiently extracting and separating Rubisco have limited its use as a global foodstuff. Leaves are lower in protein than seeds, requiring large amounts of biomass to be processed. This material normally needs to be processed quickly to avoid degradation of the final product. Extraction of Rubisco from the plant material requires breaking down the cell walls and rupturing the chloroplast. In order to obtain high-quality protein, Rubisco needs to be separated from chlorophyll, and then concentrated for final use. However, with increased consumer demand for plant protein, there is increased interest in the potential of leaf protein, and many commercial plants are now being established aimed at producing Rubisco as a food protein, with over US$60 million of funding invested in the past 5 years. Is now the time for increased use of Rubisco in food production as a nitrogen source, rather than just providing a carbon source?

Plant leaf proteins for food applications: Opportunities and challenges

Plant-based proteins are gaining a lot of attention for their health benefits and are considered as an alternative to animal proteins for developing sustainable food systems. Against the backdrop, ensuring a healthy diet supplemented with good quality protein will be a massive responsibility of governments across the globe. Increasing the yield of food crops has its limitations, including low acceptance of genetically modified crops, land availability for cultivation, and the need for large quantities of agrochemicals. It necessitates the sensible use of existing resources and farm output to derive the proteins. On average, the protein content of plant leaves is similar to that of milk, which can be efficiently tapped for food applications across the globe. There has been limited research on utilizing plant leaf proteins for food product development over the years, which has not been fruitful. However, the current global food production scenario has pushed some leading economies to reconsider the scope of plant leaf proteins with dedicated efforts. It is evident from installing pilot-scale demonstration plants for protein extraction from agro-food residues to cater to the protein demand with product formulation. The present study thoroughly reviews the opportunities and challenges linked to the production of plant leaf proteins, including its nutritional aspects, extraction and purification strategies, anti-nutritional factors, functional and sensory properties in food product development, and finally, its impact on the environment. Practical Application: Plant leaf proteins are one of the sustainable and alternative source of proteins. It can be produced in most of the agroclimatic conditions without requiring much agricultural inputs. It's functional properties are unique and finds application in novel food product formulations.

High-Moisture Shear Processes: Molecular Changes of Wheat Gluten and Potential Plant-Based Proteins for Its Replacement

Nowadays, a growing offering of plant-based meat alternatives is available in the food market. Technologically, these products are produced through high-moisture shear technology. Process settings and material composition have a significant impact on the physicochemical characteristics of the final products. Throughout the process, the unfolded protein chains may be reduced, or associate in larger structures, creating rearrangement and cross-linking during the cooling stage. Generally, soy and pea proteins are the most used ingredients in plant-based meat analogues. Nevertheless, these proteins have shown poorer results with respect to the typical fibrousness and juiciness found in real meat. To address this limitation, wheat gluten is often incorporated into the formulations. This literature review highlights the key role of wheat gluten in creating products with higher anisotropy. The generation of new disulfide bonds after the addition of wheat gluten is critical to achieve the sought-after fibrous texture, whereas its incompatibility with the other protein phase present in the system is critical for the structuring process. However, allergenicity problems related to wheat gluten require alternatives, hence an evaluation of underutilized plant-based proteins has been carried out to identify those that potentially can imitate wheat gluten behavior during high-moisture shear processing.

Designing Heat-Set Gels for Crystallizing APIs at Different Temperatures: A Crystal Engineering Approach

An organic salt crystallizes through different kinds of charge-assisted hydrogen-bonded networks depending on carboxylic functionality number and the degree of amine. These H-bonded packing patterns are often robust and predictable, so one can design a supramolecular salt with a certain purpose. In some cases, two different crystalline packing patterns can be found in Primary Ammonium Dicarboxylate (PAD) salts at different temperatures. Two kinds of supramolecular bonding, namely, charge-assisted hydrogen bonding and weak van der Waals interactions stabilize the two states. A small increase in the carbon chain length in a primary amine enhances the additional van der Waals interactions with the packing so that the 2D hydrogen-bonded network (HBN) transforms into a 1D HBN at room temperature. Such van der Waals interactions can be controlled by external heat, so a temperature-dependent 1D to 2D phase change is feasible. When certain moieties, such as azo and bipyridine, are introduced into the carboxylic acid backbone, the acids become insoluble in most organic solvents, raising their melting point, and resulting in heat-set gels. In the presence of an API, temperature and solvent-dependent polymorphic crystals can be grown in the heat-set gel medium and by simply cooling down the mixture, the API crystals can be separated easily.

Formulation and characterization of plant-based egg white analogs using RuBisCO protein

RuBisCO protein, which can be isolated from abundant and sustainable plant sources, can mimic some of the desirable functional attributes of egg white proteins. In this study, plant-based egg white analogs were successfully produced using 10 w% RuBisCO solutions (pH 8). These protein solutions had similar apparent viscosity-shear rate profiles, shear modulus-temperature profiles, gelling temperatures, and final gel strengths as egg white. However, there were some differences. RuBisCO protein gels were slightly darker than egg white, which was attributed to the presence of phenolic impurities. Moreover, RuBisCo proteins exhibited a single thermal transition temperature (∼66 °C) whereas egg white proteins exhibited two (∼66 and ∼81 °C). RuBisCO gels were more brittle but less chewy and resilient than egg white gels. This study provides valuable insights into the potential of RuBisCO protein for formulating plant-based egg white analogs.

Biorefinery of Green Biomass─How to Extract and Evaluate High Quality Leaf Protein for Food?

There is a growing need for protein for both feed and food in order to meet future demands. It is imperative to explore and utilize novel protein sources such as protein from leafy plant material, which contains high amounts of the enzyme ribulose-1,5-biphosphate carboxylase/oxygenase (RuBisCo). Leafy crops such as grasses and legumes can in humid climate produce high protein yields in a sustainable way when compared with many traditional seed protein crops. Despite this, very little RuBisCo is utilized for foods because proteins in the leaf material has a low accessibility to monogastrics. In order to utilize the leaf protein for food purposes, the protein needs to be extracted from the fiber rich leaf matrix. This conversion of green biomass to valuable products has been labeled green biorefinery. The green biorefinery may be tailored to produce different products, but in this Review, the focus is on production of food-grade protein. The existing knowledge on the extraction, purification, and concentration of protein from green biomass is reviewed. Additionally, the quality and potential application of the leaf protein in food products and side streams from the green biorefinery will be discussed along with possible uses of side streams from the protein production.

Plant-Based Colloidal Delivery Systems for Bioactives

The supplementation of plant-based foods and beverages with bioactive agents may be an important strategy for increasing human healthiness. Numerous kinds of colloidal delivery systems have been developed to encapsulate bioactives with the goal of improving their water dispersibility, chemical stability, and bioavailability. In this review, we focus on colloidal delivery systems assembled entirely from plant-based ingredients, such as lipids, proteins, polysaccharides, phospholipids, and surfactants isolated from botanical sources. In particular, the utilization of these ingredients to create plant-based nanoemulsions, nanoliposomes, nanoparticles, and microgels is covered. The utilization of these delivery systems to encapsulate, protect, and release various kinds of bioactives is highlighted, including oil-soluble vitamins (like vitamin D), ω-3 oils, carotenoids (vitamin A precursors), curcuminoids, and polyphenols. The functionality of these delivery systems can be tailored to specific applications by careful selection of ingredients and processing operations, as this enables the composition, size, shape, internal structure, surface chemistry, and electrical characteristics of the colloidal particles to be controlled. The plant-based delivery systems discussed in this article may be useful for introducing active ingredients into the next generation of plant-based foods, meat, seafood, milk, and egg analogs. Nevertheless, there is still a need to systematically compare the functional performance of different delivery systems for specific applications to establish the most appropriate one. In addition, there is a need to test their efficacy at delivering bioavailable forms of bioactives using in vivo studies.

Protein Fractionation of Green Leaves as an Underutilized Food Source-Protein Yield and the Effect of Process Parameters

Green biomass has potential as a sustainable protein source for human consumption, due to its abundance and favorable properties of its main protein, RuBisCO. Here, protein fractionation outcomes of green leafy biomass from nine crops were evaluated using a standard protocol with three major steps: juicing, thermal precipitation, and acid precipitation. Successful protein fractionation, with a freeze-dried, resolubilized white protein isolate containing RuBisCO as the final fraction, was achieved for seven of the crops, although the amount and quality of the resulting fractions differed considerably between crops. Biomass structure was negatively correlated with successful fractionation of proteins from biomass to green juice. The proteins in carrot and cabbage leaves were strongly associated with particles in the green juice, resulting in unsuccessful fractionation. Differences in thermal stability were correlated with relatedness of the biomass types, e.g., Beta vulgaris varieties showed similar performance in thermal precipitation. The optimal pH values identified for acid precipitation of soluble leaf proteins were lower than the theoretical value for RuBisCO for all biomass types, but with clear differences between biomass types. These findings reveal the challenges in using one standard fractionation protocol for production of food proteins from all types of green biomass and indicate that a general fractionation procedure where parameters are easily adjusted based on biomass type should instead be developed.

Influence of pH, Temperature and Protease Inhibitors on Kinetics and Mechanism of Thermally Induced Aggregation of Potato Proteins

Understanding aggregation in food protein systems is essential to control processes ranging from the stabilization of colloidal dispersions to the formation of macroscopic gels. Patatin rich potato protein isolates (PPI) have promising techno-functionality as alternatives to established proteins from egg white or milk. In this work, the influence of pH and temperature on the kinetics of PPI denaturation and aggregation was investigated as an option for targeted functionalization. At a slightly acidic pH, rates of denaturation and aggregation of the globular patatin in PPI were fast. These aggregates were shown to possess a low amount of disulfide bonds and a high amount of exposed hydrophobic amino acids (S₀). Gradually increasing the pH slowed down the rate of denaturation and aggregation and alkaline pH levels led to an increased formation of disulfide bonds within these aggregates, whereas S₀ was reduced. Aggregation below denaturation temperature (T_d) favored aggregation driven by disulfide bridge formation. Aggregation above T_d led to fast unfolding, and initial aggregation was less determined by disulfide bridge formation. Inter-molecular disulfide formation occurred during extended heating times. Blocking different protein interactions revealed that the formation of disulfide bond linked aggregation is preceded by the formation of non-covalent bonds. Overall, the results help to control the kinetics, morphology, and interactions of potato protein aggregation for potential applications in food systems.

Quantification of protein-protein interactions in highly denatured whey and potato protein gels

Understanding the stabilizing protein interactions in protein gels is of high importance for food- and biotechnology. Protein interactions in protein gels can help to predict hardness, deformability and other gel parameters. Currently there are two types methods used. One is to use protein interaction blocking agents and the other is to dissolve the gel in different buffer systems, which cleave the interactions. The first method alters the gelling mechanism, which is why the second method is the preferred one. However, currently published methods are often only suitable for specific gel systems as for example weakly bound protein gels. In this paper, a method is introduced, which is suitable for highly denatured whey and plant protein.•Suitable for strongly cross-linked whey protein and plant protein gels•Stronger buffer system to ensure cleavage of all protein interactions•More reproducible and simplified crushing of the gel without the introduction of uncontrolled shear stress excessively affecting the analysis of chemical bonds.

Disulfide bond formation is not crucial for the heat-induced interaction between β-lactoglobulin and milk fat globule membrane proteins

During heat treatment of milk, β-lactoglobulin (β-LG) associates with the milk fat globule membrane (MFGM). The objective of this study was to examine different binding types that could be involved in this process. First, we tested the thiol-disulfide bond interchange between β-LG and MFGM by heating raw milk (87°C, 8 min) in the presence of different reagents capable of preventing this interaction, and then evaluated the presence of β-LG in resulting MFGM preparations by sodium dodecyl sulfate-PAGE. Contrary to commonly accepted theory, β-LG still associated with MFGM when milk was heated in the presence of 10 mM N-ethylmaleimide, dithiobis-nitrobenzoic acid, or dithioerythritol. This finding indicated that noncovalent binding could be involved in the interaction, and therefore these were studied next. Preventing noncovalent interactions by heating milk in the presence of 8 M urea (to inhibit formation of hydrogen bonds) or 2 M NaCl (to inhibit electrostatic and hydrophobic interactions) reduced the association of β-LG and MFGM. Inhibiting both hydrogen and disulfide bond formation by addition of 8 M urea and 10 mM dithioerythritol or inhibiting hydrophobic interactions with 0.2% sodium dodecyl sulfate completely prevented the association. In contrast to the simple thiol-disulfide interaction model, the results suggest a more complex understanding of the interactions between β-LG and MFGM during heating of milk. This indicates that disulfide formation between β-LG and proteins in the MFGM is not required for the association, but that hydrophobic interactions and hydrogen bonding may be crucial. This novel insight into β-LG and MFGM association is in contrast to the current literature and requires further study.

Comparison of the functional properties of RuBisCO protein isolate extracted from sugar beet leaves with commercial whey protein and soy protein isolates

BACKGROUND

RuBisCO was extracted from sugar beet leaves using soft and food-compatible technologies. Proximate composition, solubility, emulsifying, foaming and gelling properties of the protein isolate were determined. All these properties were systematically benchmarked against commercial whey and soy protein isolates used in food applications.

RESULTS

RuBisCO protein isolate (RPI) contained 930 g kg^-1 of crude protein. Protein solubility was higher than 80% at pH values lower than 4.0 or higher than 5.5. Foaming capacity of RPI was better at pH 4.0 than at pH 7.0. Interestingly, 10 g kg^-1 protein foams were more stable (pH 7.0 and 4.0) than foams obtained with whey or soy protein. Moreover, 10 g kg^-1 RPI emulsions at pH 4.0 or 7.0 exhibited good stability, being similar to whey protein isolate. Remarkable gelling properties were observed at pH 7.0, where 50 g kg^-1 protein solutions of RPI formed self-supporting gels while more concentrated solutions were needed for whey or soy protein.

CONCLUSION

RuBisCO showed comparable or superior functional properties to those of currently used whey and soy protein isolates. These results highlight the high potential of sugar beet leaf protein isolate as a nutritious and functional food ingredient to face global food security and protein supply. © 2018 Society of Chemical Industry.

Food Proteins: Technological, Nutritional, and Sustainability Attributes of Traditional and Emerging Proteins

Protein is an essential macronutrient and a key structural component of many foods. The nutritional and technological properties of food protein ingredients depend on their source, extraction and purification, modification during food manufacture, and interactions with other food components. In addition to covering these elements, this review seeks to highlight underappreciated aspects of protein environmental sustainability and explores the potential of cultured meat and insect-derived proteins.

Selective and energy efficient extraction of functional proteins from microalgae for food applications

The use of a single controlled bead milling step of the microalga Tetraselmis suecica resulted in a soluble fraction, rich in functional proteins. This was achieved by fine-tuning the processing time, thereby exploiting the difference in rates of protein and carbohydrate release during milling. Soluble proteins were extracted under mild conditions -room temperature, no addition of chemicals, pH 6.5-, with a yield of 22.5% and a specific energy consumption of 0.6 kWh kg_DW^-1, which is within the recommended minimum energy for an extraction step in a biorefinery process. The resulting protein extract contained 50.4% (DW) of proteins and 26.4% carbohydrates, showed light green color and displayed superior surface activity and gelation behavior compared to whey protein isolate. The proposed process is simple (only one bead milling step), scalable, and allows the mild extraction of functional proteins, making it interesting for industrial applications in the food industry.

Techno-Functional Properties of Crude Extracts from the Green Microalga Tetraselmis suecica

A mild fractionation process to extract functional biomolecules from green microalgae was implemented. The process includes bead milling, centrifugation, and filtration with several membrane cut-offs. For each fraction, the corresponding composition was measured, and the surface activity and gelation behavior were determined. A maximum protein yield of 12% was obtained in the supernatant after bead milling and between 3.2 and 11.7% after filtration. Compared to whey protein isolate, most of the algae fractions exhibited comparable or enhanced functionality. Surface activity for air-water and oil-water interfaces and gelation activities were notably superior for the retentate fractions compared to the permeates. It is proposed that such functionality in the retentates is due to the presence of hydrophobic compounds and molecular complexes exhibiting a similar behavior as Pickering particles. We demonstrated that excellent functionality can be obtained with crude fractions, requiring minimum processing and, thus, constituting an interesting option for commercial applications.

From Current Algae Products to Future Biorefinery Practices: A Review

Microalgae are considered to be one of the most promising next generation bio-based/food feedstocks with a unique lipid composition, high protein content, and an almost unlimited amount of other bio-active molecules. High-value components such as the soluble proteins, (poly) unsaturated fatty acids, pigments, and carbohydrates can be used as an important ingredient for several markets, such as the food/feed/chemical/cosmetics and health industries. Although cultivation costs have decreased significantly in the last few decades, large microalgae production processes become economically viable if all complex compounds are optimally valorized in their functional state. To isolate these functional compounds from the biomass, cost-effective, mild, and energy-efficient biorefinery techniques need to be developed and applied. In this review we describe current microalgae biorefinery strategies and the derived products, followed by new technological developments and an outlook toward future products and the biorefinery philosophy.

Evaluation of the sensitizing potential of food proteins using two mouse models

The current methodology to identify allergenic food proteins is effective in identifying those that are likely to cross-react with known allergens. However, most assays show false positive results for low/non-allergens. Therefore, an ex vivo/in vitro DC-T cell assay and an in vivo mouse model were used to distinguish known allergenic food proteins (Ara h 1, β-Lactoglobulin, Pan b 1, bovine serum albumin, whey protein isolate) from low/non allergenic food proteins (soy lipoxygenase, gelatin, beef tropomyosin, rubisco, Sola t 1). CD4+ T cells from protein/alum-immunized mice were incubated with corresponding protein-pulsed bone marrow-derived DC and analyzed for cytokine release. All known allergens induced Th2 responses in vitro, whereas soy lipoxygenase, gelatin or beef tropomyosin did not. Sola t 1 and rubisco induced a more generalized T cell response due to endotoxin contamination, indicating the endotoxin-sensitivity of the DC-T assay. To analyze responses in vivo, mice were orally sensitized on days 0 and 7. Known allergens induced IgE and mMCP-1 release upon oral challenge at day 16, whereas the low/non-allergens did not. Both the DC-T cell assay and the mouse model were able to distinguish 5 known allergens from 5 low/non-allergens and may be useful to identify novel allergenic food proteins.