Development of a stable isotope dilution assay for an accurate quantification of protein-bound N(epsilon)-(1-deoxy-D-fructos-1-yl)-L-lysine using a (13)C-labeled internal standard

Key Aspects of Amadori Rearrangement Products as Future Food Additives

Flavor is one of the most important factors in attracting consumers and maximizing food quality, and the Maillard reaction (MR) is highly-involved in flavor formation. However, Maillard reaction products have a big drawback in their relatively low stability in thermal treatment and storage. Amadori rearrangement products (ARPs), MR intermediates, can alternatively act as potential flavor additives for their better stability and fresh flavor formation ability. This review aims to elucidate key aspects of ARPs’ future application as flavorings. The development of current analytical technologies enables the precise characterization of ARPs, while advanced preparation methods such as synthesis, separation and drying processes can increase the yield of ARPs to up to 95%. The stability of ARPs is influenced by their chemical nature, pH value, temperature, water activity and food matrix. ARPs are associated with umami and kokumi taste enhancing effects, and the flavor formation is related to amino acids/peptides of the ARPs. Peptide-ARPs can generate peptide-specific flavors, such as: 1,6-dimethy-2(1H)-pyrazinone, 1,5-dimethy-2(1H)-pyrazinone, and 1,5,6-trimethy-2(1H)-pyrazinone. However, further research on systematic stability and toxicology are needed.

Formation of Pyrazines in Maillard Model Systems: Effects of Structures of Lysine-Containing Dipeptides/Tripeptides

At present, most investigations involving the Maillard reaction models have focused on free amino acids (FAAs), whereas the effects of peptides on volatile products are poorly understood. In our study, the formation mechanism of pyrazines, which were detected as characteristic volatiles in sunflower seed oil, from the reaction system of glucose and lysine-containing dipeptides and tripeptides was studied. The effect of the amino acid sequences of the dipeptides and tripeptides on pyrazine formation was further highlighted. Four different dipeptides and six tripeptides were selected. The results showed that the production of pyrazines in the lysine-containing dipeptide models was higher than that in the tripeptide and control models. Compounds 2,5(6)-Dimethylpyrazine and 2,3,5-trimethylpyrazine were the main pyrazine compounds in the dipeptide models. Furthermore, the C- or N-terminal amino acids of lysine-containing dipeptides can exert an important effect on the formation of pyrazines. In dipeptide models with lysine at the C-terminus, the content of total pyrazines followed the order of Arg−Lys > His−Lys; the order of the total pyrazine content was Lys−His > Lys−Arg in dipeptide models with N-terminal lysine. Additionally, for the tripeptide models with different amino acid sequences, more pyrazines and a greater variety of pyrazines were detected in the tripeptide models with N-terminal lysine/arginine than in the tripeptide models with N-terminal histidine. However, the total pyrazine content and the percentage of pyrazines in the total volatiles were similar in the tripeptide models with the same amino acids at the N-terminus. This study clearly illustrates the ability of dipeptides and tripeptides containing lysine, arginine and histidine to form pyrazines, improving volatile formation during sunflower seed oil processing.

Discovery of Amadori-Type Conjugates in a Peptide Maillard Reaction and Their Corresponding Influence on the Formation of Pyrazines

Knowledge of the role of peptides in the Maillard reaction is rather limited. In this study, peptide Maillard reaction model systems were established. Volatile and nonvolatile MRPs (Maillard reaction products) were investigated by GC-O-MS and LC-MS. Carbohydrate module labeling (CAMOLA) experiments were performed to elucidate the carbon skeleton of these compounds. Results showed that the peptide reaction system generated more pyrazines than the free amino acid group. Several new Amadori-type conjugates were identified as novel Maillard reaction products that could greatly influence the formation of pyrazines. Our work suggested anew mechanism involving these Amadori-type conjugates and subsequent investigation revealed that the conjugates could be important intermediate products in the reaction between dicarbonyl and dipeptide. Our findings demonstrate anew pyrazine generation mechanism in the dipeptide Maillard reaction.

PRACTICAL APPLICATION

We found that a dipeptide Maillard reaction system generated more pyrazines than a reaction system composed of free amino acids. New cross-linked peptide-sugar compounds were identified and found to impact the formation of pyrazines. The results of this study may help in the preparation of thermal reaction flavors using enzymatically hydrolyzed vegetable/animal proteins, which contain a considerable amount of peptides, as one of the major reactants.

Maillard Proteomics: Opening New Pages

Protein glycation is a ubiquitous non-enzymatic post-translational modification, formed by reaction of protein amino and guanidino groups with carbonyl compounds, presumably reducing sugars and α-dicarbonyls. Resulting advanced glycation end products (AGEs) represent a highly heterogeneous group of compounds, deleterious in mammals due to their pro-inflammatory effect, and impact in pathogenesis of diabetes mellitus, Alzheimer’s disease and ageing. The body of information on the mechanisms and pathways of AGE formation, acquired during the last decades, clearly indicates a certain site-specificity of glycation. It makes characterization of individual glycation sites a critical pre-requisite for understanding in vivo mechanisms of AGE formation and developing adequate nutritional and therapeutic approaches to reduce it in humans. In this context, proteomics is the methodology of choice to address site-specific molecular changes related to protein glycation. Therefore, here we summarize the methods of Maillard proteomics, specifically focusing on the techniques providing comprehensive structural and quantitative characterization of glycated proteome. Further, we address the novel break-through areas, recently established in the field of Maillard research, i.e., in vitro models based on synthetic peptides, site-based diagnostics of metabolism-related diseases (e.g., diabetes mellitus), proteomics of anti-glycative defense, and dynamics of plant glycated proteome during ageing and response to environmental stress.

Probing Protein Glycation by Chromatography and Mass Spectrometry: Analysis of Glycation Adducts

Glycation is a non-enzymatic post-translational modification of proteins, formed by the reaction of reducing sugars and α-dicarbonyl products of their degradation with amino and guanidino groups of proteins. Resulted early glycation products are readily involved in further transformation, yielding a heterogeneous group of advanced glycation end products (AGEs). Their formation is associated with ageing, metabolic diseases, and thermal processing of foods. Therefore, individual glycation adducts are often considered as the markers of related pathologies and food quality. In this context, their quantification in biological and food matrices is required for diagnostics and establishment of food preparation technologies. For this, exhaustive protein hydrolysis with subsequent amino acid analysis is the strategy of choice. Thereby, multi-step enzymatic digestion procedures ensure good recoveries for the most of AGEs, whereas tandem mass spectrometry (MS/MS) in the multiple reaction monitoring (MRM) mode with stable isotope dilution or standard addition represents “a gold standard” for their quantification. Although the spectrum of quantitatively assessed AGE structures is continuously increases, application of untargeted profiling techniques for identification of new products is desired, especially for in vivo characterization of anti-glycative systems. Thereby, due to a high glycative potential of plant metabolites, more attention needs to be paid on plant-derived AGEs.

Effect of olive mill wastewater phenol compounds on reactive carbonyl species and Maillard reaction end-products in ultrahigh-temperature-treated milk

Thermal processing and Maillard reaction (MR) affect the nutritional and sensorial qualities of milk. In this paper an olive mill wastewater phenolic powder (OMW) was tested as a functional ingredient for inhibiting MR development in ultrahigh-temperature (UHT)-treated milk. OMW was added to milk at 0.1 and 0.05% w/v before UHT treatment, and the concentration of MR products was monitored to verify the effect of OMW phenols in controlling the MR. Results revealed that OMW is able to trap the reactive carbonyl species such as hydroxycarbonyls and dicarbonyls, which in turn led to the increase of Maillard-derived off-flavor development. The effect of OMW on the formation of Amadori products and N-ε-(carboxymethyl)-lysine (CML) showed that oxidative cleavage, C2-C6 cyclization, and the consequent reactive carbonyl species formation were also inhibited by OMW. Data indicated that OMW is a functional ingredient able to control the MR and to improve the nutritional and sensorial attributes of milk.

Development of stable isotope dilution assays for the quantitation of Amadori compounds in foods

During thermal processing of foods, reducing carbohydrates and amino acids may form 1-amino-1-desoxyketoses named Amadori rearrangement products after the Italian chemist Mario Amadori. Although these compounds are transient intermediates of the Maillard reaction, they are often used as suitable markers to measure the extent of a thermal food processing, such as for spray-dried milk or dried fruits. Several methods are already available in the literature for their quantitation, but measurements are often done with external calibration without addressing losses during the workup procedure. To cope with this challenge, stable isotope dilution assays in combination with LC-MS/MS were developed for the glucose-derived Amadori products of the seven amino acids valine, leucine, isoleucine, phenylalanine, tyrosine, methionine, and histidine using the respective synthesized [(13)C6]-labeled isotopologues as internal standards. The quantitation of the analytes added to a model matrix showed a very good sensitivity with the lowest limits of detection for the Amadori compound of phenylalanine of 0.1 μg/kg starch and 0.2 μg/kg oil, respectively. Also, the standard deviation measured in, for example, wheat beer was only ±2% for this analyte. Application of the method to several foods showed the highest concentrations of the Amadori product of valine in unroasted cocoa (342 mg/kg) as well as in dried bell pepper (3460 mg/kg). In agreement with literature data, drying of foods led to the formation of Amadori products, whereas they were degraded during roasting of, for example, coffee or cocoa. The study presents for the first time results on concentrations of the Amadori compounds of tyrosine and histidine in foods.

A diet based on high-heat-treated foods promotes risk factors for diabetes mellitus and cardiovascular diseases

BACKGROUND

The modern Western lifestyle is characterized by the consumption of high-heat-treated foods because of their characteristic taste and flavor. However, it has been shown that treating food at high temperatures can generate potentially harmful compounds that promote inflammation and cardiovascular disease in subjects with diabetes.

OBJECTIVE

The aim of this study was to determine whether high-heat-treated foods also pose a risk for healthy subjects.

DESIGN

A randomized, crossover, diet-controlled intervention trial with 62 volunteers was designed to compare the potential metabolic effects of 2 diets, one that was based on mild steam cooking and another that was based on high-temperature cooking. These 2 diets differed mainly in their contents of Maillard reaction products (MRPs). MRPs were assessed in the diet and in subjects' feces, blood, and urine samples, with N(epsilon)-carboxymethyllysine as an indicator of MRPs. Biological indicators of glucose and lipid metabolism as well as oxidative stress were analyzed in subjects after 1 mo on each diet.

RESULTS

In comparison with the steamed diet, 1 mo of consuming the high-heat-treated diet induced significantly lower insulin sensitivity and plasma concentrations of long-chain n-3 (omega-3) fatty acids and vitamins C and E [-17% (P < 0.002), -13% (P < 0.0001), and -8% (P < 0.01), respectively]. However, concentrations of plasma cholesterol and triglycerides increased [+5% (P < 0.01) and +9% (P < 0.01), respectively].

CONCLUSIONS

A diet that is based on high-heat-treated foods increases markers associated with an enhanced risk of type 2 diabetes and cardiovascular diseases in healthy people. Replacing high-heat-treatment techniques by mild cooking techniques may help to positively modulate biomarkers associated with an increased risk of diabetes mellitus and cardiovascular diseases.

Parameters for the evaluation of the thermal damage and nutraceutical potential of lupin-based ingredients and food products

Foods based on sweet lupin proteins are gaining attention from industry and consumers because of their possible role in the prevention of cardiovascular disease. When promoting lupin-based foods for inclusion in a daily diet, the thermal damage suffered during processing is of relevance to the bioactive and nutritional quality of the food product. N-(2-furoylmethyl)-L-lysine (furosine) quantification demonstrates that currently available sweet lupin protein isolates have a thermal damage comparable to or lower than other traditional food ingredients, and are a good source of lysine in non-dairy products. In lupin-based foods claiming to have cholesterol-lowering potential, shotgun proteomics offers itself as a fast and effective screening method for assessing the biological availability of active peptides. Such a method is readily applicable to other legume-enriched food products.

Forty years of furosine – Forty years of using Maillard reaction products as indicators of the nutritional quality of foods

The Maillard reaction products (MRPs) most widely used as markers of the nutritional quality of foods are furosine, N(epsilon)-carboxymethyllysine (CML), hydroxymethylfurfural, pyrraline, pentosidine and pronyl-lysine. One of the MRPs identified first was furosine, which was quantified in foods 40 years ago as a chemical indicator of the Amadori compound N(epsilon)-fructoselysine. Since then, furosine has gained broad attention by food chemists and biomedical researchers, as its formation upon heat treatment is well characterised. Moreover, it represents the Amadori products from early Maillard reactions in which amino acids react with reducing carbohydrates, resulting in a loss of their availability. This is of importance for the essential amino acid lysine, which is also the limiting amino acid in many proteins. In order to evaluate the nutritional quality of a protein, the concomitant analysis of free - and nutritionally available - lysine and the amount of lysine reacted to form the respective MRP is essential, even for mildly processed foods. The other chemical markers of heat treatment such as CML, pyrraline, pentosidine or pronyl-lysine seem to be useful markers of the advanced stages of Maillard reactions. Compared to the conditions in which furosine is formed, these compounds are generated under more severe conditions of heat treatment. However, the concentrations analysed are significantly lower than those of furosine. Therefore, the nutritional evaluation of a food protein should include not only furosine, but also other chemical markers of heat treatment such as, for example, CML, pyrraline and pentosidine.

Contribution of mass spectrometry to the study of the Maillard reaction in food

The Maillard reaction or non-enzymatic browning corresponds to a set of reactions occurring between amines and carbonyl compounds, especially reducing sugars. The Maillard reaction is known to occur in heated, dried, or stored foods and in vivo in mammalian organisms. In food, the Maillard reaction is responsible for changes in colour, flavor, and nutritive value but also for the formation of stabilizing and mutagenic compounds. Because of the complexity of the Maillard reaction, mass spectrometry, coupled or not to separation techniques, is a key tool in this research area and we will review in this article the contribution of mass spectrometry to the understanding of this reaction. Different steps of Maillard reaction will be described and the importance and the role played by mass spectrometry will be highlighted. In addition, different approaches to investigate the Maillard reaction from the formation of Amadori products (early Maillard reaction product) to the flavor and melanoidin production will also be covered.

Ionization enhancement in atmospheric pressure chemical ionization and suppression in electrospray ionization between target drugs and stable-isotope-labeled internal standards in quantitative liquid chromatography/tandem mass spectrometry

The phenomena of ionization suppression in electrospray ionization (ESI) and enhancement in atmospheric pressure chemical ionization (APCI) were investigated in selected-ion monitoring and selected-reaction monitoring modes for nine drugs and their corresponding stable-isotope-labeled internal standards (IS). The results showed that all investigated target drugs and their co-eluting isotope-labeled IS suppress each other's ionization responses in ESI. The factors affecting the extent of suppression in ESI were investigated, including structures and concentrations of drugs, matrix effects, and flow rate. In contrast to the ESI results, APCI caused seven of the nine investigated target drugs and their co-eluting isotope-labeled IS to enhance each other's ionization responses. The mutual ionization suppression or enhancement between drugs and their isotope-labeled IS could possibly influence assay sensitivity, reproducibility, accuracy and linearity in quantitative liquid chromatography/mass spectrometry (LC/MS) and liquid chromatography/tandem mass spectrometry (LC/MS/MS). However, calibration curves were linear if an appropriate IS concentration was selected for a desired calibration range to keep the response factors constant.