An Oxidation Induced by Potassium Metal. Studies on the Anionic Cyclodehydrogenation of 1,1′-Binaphthyl to Perylene

Synthesis without solvent: consequences for mechanochemical reactivity

Solvents are so nearly omnipresent in synthetic chemistry that a classic question for their use has been: "What is the best solvent for this reaction?" The increasing use of mechanochemical approaches to synthesis-by grinding, milling, extrusion, or other means-and usually with no, or only limited, amounts of solvent, has raised an alternative question for the synthetic chemist: "What happens if there is no solvent?" This review focuses on a three-part answer to that question: when there is little change ("solvent-optional" reactions); when solvent needs to be present in some form, even if only in the amounts provided by liquid-assisted (LAG) or solvate-assisted grinding; and those cases in which mechanochemistry allows access to compounds that cannot be obtained from solution-based routes. The emphasis here is on inorganic and organometallic systems, including selected examples of mechanosynthesis and mechanocatalysis. Issues of mechanochemical depictions and the adequacy of LAG descriptions are also reviewed.

Time-resolved imaging and analysis of the electron beam-induced formation of an open-cage metallo-azafullerene

The visualization of single-molecule reactions provides crucial insights into chemical processes, and the ability to do so has grown with the advances in high-resolution transmission electron microscopy. There is currently a limited mechanistic understanding of chemical reactions under the electron beam. However, such reactions may enable synthetic methodologies that cannot be accessed by traditional organic chemistry methods. Here we demonstrate the synthetic use of the electron beam, by in-depth single-molecule, atomic-resolution, time-resolved transmission electron microscopy studies, in inducing the formation of a doubly holed fullerene-porphyrin cage structure from a well-defined benzoporphyrin precursor deposited on graphene. Through real-time imaging, we analyse the hybrid's ability to host up to two Pb atoms, and subsequently probe the dynamics of the Pb-Pb binding motif in this exotic metallo-organic cage structure. Through simulation, we conclude that the secondary electrons, which accumulate in the periphery of the irradiated area, can also initiate chemical reactions. Consequently, designing advanced carbon nanostructures by electron-beam lithography will depend on the understanding and limitations of molecular radiation chemistry.

Lithium-Mediated Mechanochemical Cyclodehydrogenation

Cyclodehydrogenation is an essential synthetic method for the preparation of polycyclic aromatic hydrocarbons, polycyclic heteroaromatic compounds, and nanographenes. Among the many examples, anionic cyclodehydrogenation using potassium(0) has attracted synthetic chemists because of its irreplaceable reactivity and utility in obtaining rylene structures from binaphthyl derivatives. However, existing methods are difficult to use in terms of practicality, pyrophoricity, and lack of scalability and applicability. Herein, we report the development of a lithium(0)-mediated mechanochemical anionic cyclodehydrogenation reaction for the first time. This reaction could be easily performed using a conventional and easy-to-handle lithium(0) wire at room temperature, even under air, and the reaction of 1,1'-binaphthyl is complete within 30 min to afford perylene in 94% yield. Using this novel and user-friendly protocol, we investigated substrate scope, reaction mechanism, and gram-scale synthesis. As a result, remarkable applicability and practicality over previous methods, as well as limitations, were comprehensively studied by computational studies and nuclear magnetic resonance analysis. Furthermore, we demonstrated two-, three-, and five-fold cyclodehydrogenations for the synthesis of novel nanographenes. In particular, quinterrylene ([5]rylene or pentarylene), the longest nonsubstituted molecular rylene, was synthesized for the first time.

Photostable NIR-II Pigments from Extended Rylenecarboximides

A series of near-infrared (NIR) organic absorbers, named FNs and FPs, have been obtained with absorption maxima from 870 nm to 1100 nm and thus falling into the attractive second near-infrared region (NIR-II). The synthesis of their extended aromatic cores utilized an initial aryl-amination between 4-aminonaphthalene-1,8-dicarboximide (NMI-NH₂ ) or 9-aminoperylene-3,4-dicarboximide (PMI-NH₂ ) with chloro-substituted 9,10-anthraquinones followed by a novel base-induced cyclodehydrogenation. A NIR-II pigment, compound FPP, was obtained through de-alkylation of a soluble precursor. The synthesis of this photostable pigment is high-yielding and avoids column chromatographic purification which is important for many applications.

1-Substituted Perylene Derivatives by Anionic Cyclodehydrogenation: Analysis of the Reaction Mechanism

Perylene derivatives constitute a promising class of compounds with technological applications mainly due to their optoelectronic properties. One mechanism proposed to synthesize them, starting from binaphthyl derivatives, is anionic cyclodehydrogenation (under reductive conditions). However, the scope of this reaction is limited. In the present study, we report a theoretical and experimental analysis of this particular reaction mechanism for its use in the synthesis of 1-substituted perylenes. Different substituents at position 2 of 1,1'-binaphthalene were evaluated: -OCH₃, -OSi(CH₃)₂C(CH₃)₃, and -N(CH₃)₂. Based on density functional theory (DFT) calculations on the proposed mechanism, we suggest that the cyclization takes place from binaphthyl dianion instead of its radical anion. This dianion has an open-shell diradical nature, and this could be the species that was detected by EPR in previous studies. The O-substituted derivatives could not afford the perylene derivatives since their radical anions fragment and the necessary binaphthyl dianion could not be formed. On the other hand, 49% of N,N-dimethylperylen-1-amine was obtained starting from the N-substituted 2-binapthyl derivative as a substrate, employing a simpler experimental methodology.

Strongly Correlated Ladders in K-Doped p-Terphenyl Crystals

Potassium-doped terphenyl has recently attracted attention as a potential host for high-transition-temperature superconductivity. Here, we elucidate the many-body electronic structure of recently synthesized potassium-doped terphenyl crystals. We show that this system may be understood as a set of weakly coupled one-dimensional ladders. Depending on the strength of the interladder coupling, the system may exhibit insulating spin-gapped valence-bond solid or antiferromagnetic phases, both of which upon hole doping may give rise to superconductivity. This terphenyl-based ladder material serves as a new platform for investigating the fate of ladder phases in the presence of three-dimensional coupling as well as for novel superconductivity.

Parent B2 N2 -Perylenes with Different BN Orientations

Introducing BN units into polycyclic aromatic hydrocarbons expands the chemical space of conjugated materials with novel properties. However, it is challenging to achieve accurate synthesis of BN-PAHs with specific BN positions and orientations. Here, three new parent B₂ N₂ -perylenes with different BN orientations are synthesized with BN-naphthalene as the building block, providing systematic insight into the effects of BN incorporation with different orientations on the structure, (anti)aromaticity, crystal packing and photophysical properties. The intermolecular dipole-dipole interaction shortens the π-π stacking distance. The crystal structure, (anti)aromaticity, and photophysical properties vary with the change of BN orientation. The revealed BN doping effects may provide a guideline for the synthesis of BN-PAHs with specific stacking structures, and the synthetic strategy employed here can be extended toward the synthesis of larger BN-embedded PAHs with adjustable BN patterns.

Robust Cobalt Catalyst for Nitrile/Alkyne [2+2+2] Cycloaddition: Synthesis of Polyarylpyridines and Their Mechanochemical Cyclodehydrogenation to Nitrogen-Containing Polyaromatics*

The transition-metal-catalyzed [2+2+2] cycloaddition of nitriles and alkynes is an established synthetic approach to pyridines; however, these cycloadditions often rely on the use of tethered diynes or cyanoalkynes as one of the reactants. Thus, examples of efficient, fully intermolecular catalytic [2+2+2] pyridine synthesis, especially those employing unactivated nitriles and internal alkynes leading to pentasubstituted pyridines, remain scarce. Herein, we report on simple and inexpensive catalytic systems based on cobalt(II) iodide, 1,3-bis(diphenylphosphino)propane, and Zn that promote [2+2+2] cycloaddition of various nitriles and diarylacetylenes for the synthesis of a broad range of polyarylated pyridines. DFT studies support a reaction pathway involving oxidative coupling of two alkynes, insertion of the nitrile into a cobaltacyclopentadiene, and C-N reductive elimination. The resulting tetra- and pentaarylpyridines serve as precursors to hitherto unprecedented nitrogen-containing polycyclic aromatic hydrocarbons via mechanochemically assisted multifold reductive cyclodehydrogenation.

Synthesis and Properties of Perylene-Bridge-Anchor Chromophoric Compounds

The quest to control chromophore/semiconductor properties to enable new technologies in energy and information science requires detailed understanding of charge carrier dynamics at the atomistic level, which can often be attained through the use of model systems. Perylene-bridge-anchor compounds are successful models for studying fundamental charge transfer processes on TiO₂, which remains among the most commonly investigated and technologically important interfaces, mostly because of perylene's advantageous electronic and optical properties. Nonetheless, the ability to fully exploit synthetically the substitution pattern of perylene with linker (= bridge-anchor) units remains little explored. Here we developed 2,5-di-tert-butylperylene (DtBuPe)-bridge-anchor compounds with t-Bu group substituents to prevent π-stacking and one or two linker units in both the peri and ortho positions, by employing a combination of Friedel-Crafts alkylations, bromination, iridium-catalyzed borylation, and palladium-catalyzed cross-coupling reactions. Photophysical characterization and computational analysis by density functional theory (DFT) and time-dependent DFT (TD-DFT) were carried out on four DtBuPe acrylic acid derivatives with a single or a double linker in peri (12b), ortho (15b), peri,peri (18b), and ortho,ortho (21b). The energies of the unoccupied orbitals {LUMO, LUMO + 1, LUMO + 2} are strongly affected by the presence of a π-conjugated linker, resulting in a stabilization of these states and a red shift of their absorption and emission spectra, as well as the loss of vibronic structure in the spectrum of the peri,peri compound, consistent with the strong bonding character of this substitution pattern.

Arenium cation or radical cation? An insight into the cyclodehydrogenation reaction of 2-substituted binaphthyls mediated by Lewis acids

Perylene and its derivatives are some of the most interesting chromophores in the field of molecular design. One of the most employed methodologies for their synthesis is the cyclodehydrogenation of binaphthyls mediated by Lewis acids. In this article, we investigated the cyclodehydrogenation reaction of 2-substituted binaphthyls to afford the bay-substituted perylene. By using AlCl₃ as a Lewis acid and high temperatures (the Scholl reaction), two new products bearing NH₂ and N(CH₃)₂ groups at position 2 of the perylene ring were synthesized. Under these conditions, we were also able to obtain terrylene from ternaphthalene in 38% yield after two cyclodehydrogenation reactions in a single step. The attempts to promote the formation of a radical cation (necessary intermediary for the oxidative aromatic coupling mechanism) by using FeCl₃ or a strong oxidant like 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) did not yield the expected products. DFT calculations suggested that the lack of reaction for oxidative aromatic coupling is caused by the difference between the oxidation potentials of the donor/acceptor couple. In the case of the Scholl reaction, the regiochemistry involved in the formation of the σ-complex together with the activation energy of the C–C coupling reaction helped to explain the differences in the reactivity of the different substrates studied.

Cyclodehydrogenation reactions of 2-substituted binaphthyls induced by a Lewis acid. Synthesis and theoretical studies of the reaction mechanisms.

Synthesis of Nitrogen-Containing Polyaromatics by Aza-Annulative π-Extension of Unfunctionalized Aromatics

Nitrogen-containing polycyclic aromatic compounds (N-PACs) are an important class of compounds in materials science. Reported here is a new aza-annulative π-extension (aza-APEX) reaction that allows rapid access to a range of N-PACs in 11-84 % yields from readily available unfunctionalized aromatics and imidoyl chlorides. In the presence of silver hexafluorophosphate, arenes and imidoyl chlorides couple in a regioselective fashion. The follow-up oxidative treatment with p-chloranil affords structurally diverse N-PACs, which are very difficult to synthesize. DFT calculations reveal that the aza-APEX reaction proceeds through the formal [4+2] cycloaddition of an arene and an in situ generated diarylnitrilium salt, with sequential aromatizations having relatively low activation energies. Transformation of N-PACs into nitrogen-doped nanographenes and their photophysical properties are also described.

Synthesis of polycyclic aromatic hydrocarbons by palladium-catalysed [3 + 3] annulation

A new [3 + 3] annulation method for the synthesis of polycyclic aromatic hydrocarbons (PAHs) from two smaller aromatic fragments is reported. Packing structures for four products were obtained and relation to that of parent perylene was discussed.

Perylene, Oligorylenes, and Aza-Analogs

An in-depth discussion of the properties of perylene is presented. Tuning the properties of perylene by introducing nitrogens is also explored. Finally, we do not discuss the synthesis and properties of oligorylenes functionalized with dicarboxyimide bonds.

Singlet exciton fission in thin films of tert-butyl-substituted terrylenes

Two terrylene chromophores, 2,5,10,13-tetra(tert-butyl)terrylene (1) and 2,5-di(tert-butyl)terrylene (2), were synthesized and studied to determine their singlet exciton fission (SF) efficiencies. Compound 1 crystallizes in one-dimensional stacks, whereas 2 packs in a slip-stacked, herringbone pattern of dimers motif. Strongly quenched fluorescence and rapid singlet exciton decay dynamics are observed in vapor-deposited thin films of 1 and 2. Phosphorescence measurements on thin films of 1 and 2 show that SF is only 70 meV endoergic for these chromophores. Femtosecond transient absorption experiments using low laser fluences on these films reveal rapid triplet exciton formation for both 1 (τ = 120 ± 10 ps) and 2 (τ = 320 ± 20 ps) that depends strongly on film crystallinity. The transient absorption data are consistent with formation of an excimer state prior to SF. Triplet exciton yield measurements indicate nearly quantitative SF in thin films of both chromophores in highly crystalline solvent-vapor-annealed films: 170 ± 20% for 1 and 200 ± 30% for 2. These results show that significantly different crystal morphologies of the same chromophore can both result in high-efficiency SF provided that the energetics are favorable.

Synthesis and conformation of 3,6-connected cyclohexadiene chains

3,6-Connected cyclohexadienes as precursors for polyphenylenes are synthesized and characterized by mass spectrometry and NMR spectroscopy. Pure fractions of trimers, hexamers, and nonamers are collected after separation of the product mixture by recycling GPC. The anticipated formation of rigid linear structures, due to the trans-configuration of the monomeric units, is supported by density functional theory and experimentally confirmed by dynamic light scattering from dilute solution at low scattering angles. The obtained translational diffusion coefficients are represented by rigid rod-like or prolate ellipsoid-like molecular shapes. The measurements of diffusion coefficients reveal a length-dependent ratio of 1:2:3 between the three oligomers, which directly correlates to the expected length extension from trimer to nonamer.

Vertically-expanded imidazo[1,2-a]pyridines and imidazo[1,5-a]pyridine via dehydrogenative coupling

The intramolecular dehydrogenative coupling mediated by potassium constitutes the general methodology leading to weakly emitting π-expanded heterocycles.

Pd(OAc)2/o-chloranil/M(OTf)n: a catalyst for the direct C-H arylation of polycyclic aromatic hydrocarbons with boryl-, silyl-, and unfunctionalized arenes

Pd(OAc)(2)/o-chloranil/M(OTf)(n) can effectively promote the C-H arylation of fluoranthene with arylboron compounds or arylsilanes. The reaction takes place with high regioselectivity at the C3 position of fluoranthene. Moreover, the new catalytic system allows the use of unfunctionalized arenes as coupling partners in the arylation of polycyclic aromatic hydrocarbons.