Quantitative Functional Group Orientation in Langmuir Films by Infrared Reflection−Absorption Spectroscopy: CO Groups in Behenic Acid Methyl Ester and sn2-13C-DSPC

Spectroscopy of Retinoic Acid at the Air-Water Interface

The spectroscopy of all-trans-retinoic acid (ATRA), an important molecule of biological origin that can be found in nature, is investigated at the air-water interface using UV-Vis and IR reflection spectroscopy. We employ a UV-Vis reflection absorption spectroscopy (RAS) experiment along with infrared reflection absorption spectroscopy (IR-RAS) to probe ATRA at the air-water interface. We elucidate the factors influencing the spectroscopy of ATRA at the air-water interface and compare its spectra at the water surface with results of bulk samples obtained with conventional spectroscopic methods and computational chemistry. Monolayers of pure ATRA as well as mixed ATRA with stearic-d₃₅ acid were prepared, and the spectroscopy reveals that ATRA forms J-aggregates with itself, causing a significant redshift of its S₀ to S₁ electronic transition. Pure ATRA monolayers are found to be unstable at the air-water interface and are lost from the surface over time due to the formation of aggregates. The mixture of ATRA and stearic-d₃₅ acid has been shown to stabilize the monolayers and inhibit the loss of surface ATRA. On the basis of our observations, we propose that ATRA could be a significant photosensitizer in natural aqueous environments.

Atmospheric chemical processes of microcystin-LR at the interface of sea spray aerosol

Microcystins are the most toxic toxins released by cyanobacteria and they have adverse effects on aquatic ecosystems and even human health. Although the removal and detoxification of microcystins in various water bodies have been extensively studied, the interaction mechanism and reaction process of microcystins once they enter the atmosphere are largely unknown, especially at the organic-enriched sea spray aerosol (SSA) interface. Herein, using the surface technique of Langmuir trough coupled in-situ infrared reflection-absorption spectra, we studied the interfacial behavior of microcystin-LR (MC-LR) in artificial seawater containing humic acid and typical surfactants in the presence or absence of UV-irradiation. Zwitterionic 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and anionic stearic acid (SA) were chosen as typical film-forming species, results obtained from the surface pressure-area isotherms showed that MC-LR caused greater expansion of the DSPC monolayer. The comparable results of MC-LR in DSPC/SA-containing systems indicated that the interaction ability was closely related to the monolayer molecular structure and was regulated by electrostatic interaction. Furthermore, the presence of humic acid (HA) could enhance the interaction between microcystin and monolayer molecules. UV-irradiation experiments showed that the photosensitized reaction greatly promoted the removal of microcystin embedded in the SSA surface compared with the direct photolysis effect in the absence of HA. These findings highlight that the toxic effects of microcystins after entering the atmosphere may be weakened by photochemical reactions.

Role of Hydration in Magnesium versus Calcium Ion Pairing with Carboxylate: Solution and the Aqueous Interface

The binding of group II metal cations such as Ca²⁺ and Mg²⁺ has been largely categorized as electrostatic or ionic using carboxylate symmetric and asymmetric stretching frequency assignments that have been historically used with little regard for the solvation environment of aqueous solutions. However, given the importance of these cations and their binding mechanisms related to biological function and in revealing surface enrichment factors for ocean to marine aerosol transfer, it is imperative that a deeper understanding be sought to include hydration effects. Here, infrared reflection-absorption and Raman spectra for surface and solution phase carboxylate binding information, respectively, are compared against bare (unbound) carboxylate and bidentate Zn²⁺:carboxylate spectral signatures. Spectral non-coincidence effect analysis, temperature studies, and spectral and potential of mean force calculations result in a concise interpretation of binding motifs that include the role of mediating water molecules, that is, contact and solvent-shared ion pairs. Calcium directly binds to the carboxylate group in contact ion pairs where magnesium rarely does. Moreover, we reveal the dominance of the solvent-shared ion pair of magnesium with carboxylate at the air-water interface and in solution.

Orientation of Oligopeptides in Self-Assembled Monolayers Inferred from Infrared Reflection-Absorption Spectroscopy

A series of a single tryptophan containing oligo-alanine peptides were recently characterized as conductive molecules that enable electron transport between electrodes. IR reflection-absorption of self-assembled monolayers of such peptides on gold surfaces revealed that the relative intensities of amide I and II bands in the respective spectra depend on the tryptophan residue position in the oligopeptide sequence. This indicates different average peptide orientations with respect to the normal onto the carrying gold surface. We developed a model which calculates the polarized reflectivities of the amide I and II bands as function of the angle of the incident light, the average peptide orientation and the relative orientations of peptide group at the N-terminal. The orientation and strength of vibrational transition dipole moments were calculated by employing an excitonic coupling approach which considers probable conformational distributions of the disordered peptides. Our results revealed that the position of the tryptophan can affect the effective tilt angle of the peptide as well as the orientation of transition dipole moments with respect to the reflection plane. We have also calculated the average end to end distances of the examined peptides and found them to be in reasonable agreement with experimental values determined by ellipsometry. Some evidence is obtained for the notion that increasing the tilt angle of the investigated peptides reduces their conductivity.

The interaction of antimicrobial peptides with membranes

The interaction of antimicrobial peptides (AMPs) with biological membranes is in the focus of research since several years, and the most important features and modes of action of AMPs are described in this review. Different model systems can be used to understand such interactions on a molecular level. As a special example, we use 2D and 3D model membranes to investigate the interaction of the natural cyclic (Ar-1) and the synthetic linear molecule arenicin with selected amphiphiles and phospholipids. A panoply of sophisticated methods has been used to analyze these interactions on a molecular level. As a general trend, one observes that cationic antimicrobial peptides do not interact with cationic amphiphiles due to electrostatic repulsion, whereas with non-ionic amphiphiles, the peptide interacts only with aggregated systems and not with monomers. The interaction is weak (hydrophobic interaction) and requires an aggregated state with a large surface (cylindrical micelles). Anionic amphiphiles (as monomers or micelles) exhibit strong electrostatic interactions with the AMPs leading to changes in the peptide conformation. Both types of peptides interact strongly with anionic phospholipid monolayers with a preference for fluid layers. The interaction with a zwitterionic layer is almost absent for the linear derivative but measurable for the cyclic arenicin Ar-1. This is in accordance with biological experiments showing that Ar-1 forms well defined stable pores in phospholipid and lipopolysaccharide (LPS) membranes (cytotoxicity). The synthetic linear arenicin, which is less cytotoxic, does not affect the mammalian lipids to such an extent. The interaction of arenicin with bacterial membrane lipids is dominated by hydrogen bonding together with electrostatic and hydrophobic interactions.

Organization of T-shaped facial amphiphiles at the air/water interface studied by infrared reflection absorption spectroscopy

We studied the behavior of monolayers at the air/water interface of T-shaped facial amphiphiles which show liquid-crystalline mesophases in the bulk. The compounds are composed of a rigid p-terphenyl core (TP) with two terminal hydrophobic ether linked alkyl chains of equal length and one facial hydrophilic tri(ethylene oxide) chain with a carboxylic acid end group. Due to their amphiphilic nature they form stable Langmuir films at the air/water interface. Depending on the alkyl chain length they show markedly different compression isotherms. We used infrared reflection absorption spectroscopy (IRRAS) to study the changes in molecular organization of the TP films upon compression. We could retrieve information on layer thickness, alkyl chain crystallization, and the orientation of the TP cores within the films. Films of TPs with long (16 carbon atoms: TP 16/3) and short (10 carbon atoms: TP 10/3) alkyl chains were compared. Compression of TP 16/3 leads to crystallization of the terminal alkyl chains, whereas the alkyl chains of TP 10/3 stay fluid over the complete compression range. TP 10/3 shows an extended plateau in the compression isotherm which is due to a layering transition. The mechanism of this layering transition is discussed. Special attention was paid to the question of whether a so-called roll-over collapse occurs during compression. From the beginning to the end of the plateau, the layer thickness is increased from 15 to 38 Å and the orientation of the TP cores changes from parallel to the water surface to isotropic. We conclude that the plateau in the compression isotherm reflects the transition of a TP monolayer to a TP multilayer. The monolayer consists of a sublayer of well-organized TP cores underneath a sublayer of fluid alkyl chains whereas the multilayer consists of a well oriented bottom layer and a disordered top layer. Our findings do not support the model of a roll-over collapse. This study demonstrates how the IRRA band intensity of OH or OD stretching vibrations can be used to retrieve information about layer thickness and refractive indices of the film and how multicomponent IRRA bands can be fitted to retrieve information about the orientation of molecules within the monolayer.

Infrared reflection-absorption spectroscopy: principles and applications to lipid-protein interaction in Langmuir films

Infrared reflection-absorption spectroscopy (IRRAS) of lipid/protein monolayer films in situ at the air/water interface provides unique molecular structure and orientation information from the film constituents. The technique is thus well suited for studies of lipid/protein interaction in a physiologically relevant environment. Initially, the nature of the IRRAS experiment is described and the molecular structure information that may be obtained is recapitulated. Subsequently, several types of applications, including the determination of lipid chain conformation and tilt as well as elucidation of protein secondary structure are reviewed. The current article attempts to provide the reader with an understanding of the current capabilities of IRRAS instrumentation and the type of results that have been achieved to date from IRRAS studies of lipids, proteins, and lipid/protein films of progressively increasing complexity. Finally, possible extensions of the technology are briefly considered.

Effects of surface pressure on the structure of distearoylphosphatidylcholine monolayers formed at the air/water interface

The structure of the monolayer formed at an air/water interface by the phospholipid distearoylphosphatidylcholine (DSPC) has been determined as a function of the monolayer surface pressure (pi) using Brewster angle microscopy and neutron reflectivity. The microscopy studies demonstrate that the DSPC molecules form an extremely homogeneous monolayer on the water surface with no evidence of any domain formation. The neutron reflectivity measurements provide information on the thickness of the DSPC alkyl chains, head groups, and associated solvent distributions, along with the separations between these distributions and the interfacial area per molecule. Partial structure factor analyses of the reflectivity data show that the area occupied by each DSPC molecule decreases from 49 A2 at pi = 20 mN/m to 44 A2 at pi = 50 mN/m. There are concomitant increases in the widths of the lipids' alkyl chains and headgroup distributions (modeled as Gaussians), with the former rising from 18 A (at pi = 20 mN/m) to 20 A (at pi = 50 mN/m) and the latter rising from 14 A (at pi = 20 mN/m) to 18 A (at pi = 50 mN/m). The compression of the monolayer is also shown to give rise to an increased surface roughness, the principal component of which is found to be the thermal roughness caused by capillary waves. At all surface pressures studied (covering the range from 20 to 50 mN/m), the alkyl chains and head groups of the DSPC are found to have roughly the same orientations, with the alkyl chains tilted with respect to the surface normal by about 34 degrees and the head groups lying parallel to the interface normal, projecting vertically down into the aqueous subphase. Given the various trends noted on how the structure of the DSPC monolayer changes as a function of pi, we extrapolate to consider the structure of the monolayer immediately before its collapse.

Supramolecular architecture in Langmuir and Langmuir-Blodgett films incorporating a chiral azobenzene

This article describes the synthesis and fabrication of Langmuir and Langmuir-Blodgett (LB) films incorporating a chiral azobenzene derivative, namely, ( S)-4- sec-butyloxy-4'-[5''-(methyloxycarbonyl)pentyl-1''-oxy]azobenzene, abbreviated as AZO-C4(S). Appropriate conditions for the fabrication of monolayers of AZO-C4(S) at the air-water interface have been established, and the resulting Langmuir films have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and UV-vis reflection spectroscopy. The results indicate the formation of an ordered trilayer at the air-water interface with UV-vis reflection spectroscopy showing a new supramolecular architecture for multilayered films as well as the formation of J aggregates. Films were transferred onto solid substrates, with AFM revealing well-ordered multilayered films without 3D defects. Infrared and UV-vis absorption spectroscopy indicate that the supramolecular architecture may be favored by the formation of H bonds between acid groups in neighboring layers and pi-pi intermolecular interactions. Circular dichroism spectra reveal chiro-optical activity in multilayered LB films.

Interaction of recombinant surfactant protein D with lipopolysaccharide: conformation and orientation of bound protein by IRRAS and simulations

Effective innate host defense requires early recognition of pathogens. Surfactant protein D (SP-D), shown to play a role in host defense, binds to the lipopolysaccharide (LPS) component of Gram-negative bacterial membranes. Binding takes place via the carbohydrate recognition domain (CRD) of SP-D. Recombinant trimeric neck+CRDs (NCRD) have proven valuable in biophysical studies of specific interactions. Although X-ray crystallography has provided atomic level information on NCRD binding to carbohydrates and other ligands, molecular level information about interactions between SP-D and biological ligands under physiologically relevant conditions is lacking. Infrared reflection-absorption spectroscopy (IRRAS) provides molecular structure information from films at the air/water interface where protein adsorption to LPS monolayers serves as a model for protein-lipid interaction. In the current studies, we examine the adsorption of NCRDs to Rd 1 LPS monolayers using surface pressure measurements and IRRAS. Measurements of surface pressure, Amide I band intensities, and LPS acyl chain conformational ordering, along with the introduction of EDTA, permit discrimination of Ca (2+)-mediated binding from nonspecific protein adsorption. The findings support the concept of specific binding between the CRD and heptoses in the core region of LPS. In addition, a novel simulation method that accurately predicts the IR Amide I contour from X-ray coordinates of NCRD SP-D is applied and coupled to quantitative IRRAS equations providing information on protein orientation. Marked differences in orientation are found when the NCRD binds to LPS compared to nonspecific adsorption. The geometry suggests that all three CRDs are simultaneously bound to LPS under conditions that support the Ca (2+)-mediated interaction.

Characterization of peptide-guided polymer assembly at the air/water interface

An organo-soluble, peptide-polymer conjugate that combines poly(n-butyl acrylate) with a beta-sheet-forming peptide is spread at the water surface to investigate peptide-guided self-assembly in a two-dimensional environment. Single layers of the conjugate are studied to gain information on the packing, orientation, and structure of the conjugate molecules using standard monolayer techniques: isotherms, grazing incidence X-ray diffraction (GIXD), and infrared reflection absorption spectroscopy (IRRAS). At all conditions studied, the stabilizing beta-sheet network consists of antiparallel beta-sheets oriented parallel to the air/water interface. The incorporation of temporary switch defects in the peptide segment enables beta-sheet assembly to be triggered at different packing densities. Stable monolayers, with low compressibilities similar to peptide monolayers, form when beta-sheet assembly occurs in monolayers that contain closely packed conjugate molecules. Langmuir-Schaefer transfer of the switched monolayer seeded with 1/1000 part stearic acid results in a transferred monolayer containing ordered domains with 7 nm wide stripes, a width in agreement with the end-to-end distance of the conjugate molecule. In this interfacial system, high packing densities and a hydrophobic seed molecule play an important role in beta-sheet network and structure formation. Both effects likely direct the highly ordered beta-sheet structure because of beta-strand prealignment. Insights gained from self-assembly in this system can be applied to peptide aggregation mechanisms in more complex interfacial environments.

Determination of chain orientation in the monolayers of amino-acid-derived schiff base at the air-water interface using in situ infrared reflection absorption spectroscopy

The chain orientation in the monolayers of amino-acid-derived Schiff base, 4-(4-dodecyloxy)-2-hydroxybenzylideneamino)benzoic acid (DSA), at the air-water interface has been determined using infrared reflection absorption spectroscopy (IRRAS). On pure water, a condensed monolayer is formed with the long axes of Schiff base segments almost perpendicular to the water surface. In the presence of metal ions (Ca2+, Co2+, Zn2+, Ni2+, and Cu2+) in the subphase, the monolayer is expanded and the long axes of the Schiff base segments are inclined with respect to the monolayer normal depending on metal ion. The monolayer thickness, which is an important parameter for quantitative determination of orientation of hydrocarbon chains, is composed of alkyl chains and salicylideneaniline portions for the DSA monolayers. The effective thickness of the Schiff base portions is roughly estimated in the combination of the IRRAS results and surface pressure-area isotherms for computer simulation, since the only two observable p- and s-polarized reflectance-absorbance (RA) values can be obtained. The alkyl chains with almost all-trans conformations are oriented at an angle of about 10 degrees for H2O, 15 degrees for Ca2+, 30 degrees for Co2+, 35 degrees -40 degrees for Zn2+, and 35 degrees -40 degrees for Ni2+ with respect to the monolayer normal. The chain segments linked with gauche conformers in the case of Cu2+ are estimated to be 40 degrees -50 degrees away from the normal.

Structural characterization and properties of an azopolymer arranged in Langmuir and Langmuir-Blodgett films

The fabrication of Langmuir and Langmuir-Blodgett (LB) films of an acid-azopolymer (PAzCOOH) is reported. Several techniques were used in their characterization: surface pressure (pi) and surface potential (DeltaV) isotherms, UV-vis reflection spectroscopy, and Brewster angle microscopy (BAM) for the Langmuir films and contact angle measurements, UV-vis, fluorescence, IR and Raman spectroscopy and scanning electronic microscopy (SEM) for the LB films. Our study reveals that lateral chains of the polymer situate preferentially onto the water surface with the acid group in contact with the water, where aggregates are scarcely formed. Therefore, the lateral chains of PAzCOOH can be treated as individual monomers to determine structural properties of the fabricated Langmuir and LB films. Monomeric treatment has been used to interpret UV-vis reflection spectroscopy, and a monomer model has been performed to represent lateral chains using density functional theory at B3LYP 6-31G(d,p) level of theory to assign the observed vibrational spectra.

Preparation of Ordered Films Containing a Phenylene Ethynylene Oligomer by the Langmuir−Blodgett Technique

This paper reports the fabrication and characterization of Langmuir and Langmuir-Blodgett (LB) films incorporating an oligo(phenylene-ethynylene) (OPE) derivative, namely, 4-[4-(4-hexyloxyphenylethynyl)-phenylethynyl]-benzoic acid (HBPEB). Conditions appropriate for deposition of monolayers of HBPEB at the air-water interface have been established and the resulting Langmuir films characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. The Langmuir films are readily transferred onto solid substrates, and one-layer LB films transferred at several surface pressures onto mica substrates have been analyzed by means of atomic force microscopy, from which it can be concluded that 14 mN/m is an optimum surface pressure of transference, giving well-ordered homogeneous films without three-dimensional defects and a low surface roughness. The optical and emissive properties of the LB films have been determined with significant blue-shifted absorption spectra indicating formation of two-dimensional H aggregates and a Stokes shift illustrating the effects of the solid-like environment on the molecular chromophore.

Tethered bilayer lipid membranes studied by simultaneous attenuated total reflectance infrared spectroscopy and electrochemical impedance spectroscopy

The formation of tethered lipid bilayer membranes (tBLMs) from unilamelar vesicles of egg yolk phosphatidylcholine (EggPC) on mixed self-assembled monolayers (SAMs) from varying ratios of 6-mercaptohexanol and EO(3)Cholesteryl on gold has been monitored by simultaneous attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and electrochemical impedance spectroscopy (EIS). The influence of the lipid orientation (and hence the anisotropy) of lipids on a gold film on the dichroic ratio was studied by simulations of spectra with a matrix method for anisotropic layers. It is shown that for certain tilt angles of the dielectric tensor of the adsorbed anisotropic layer dispersive and negative absorption bands are possible. The experimental data indicate that the structure of the assemblies obtained varies with varying SAM composition. On SAMs with a high content of EO(3)Cholesteryl, tBLMs with reduced fluidity are formed. For SAMs with a high content of 6-mercaptohexanol, the results are consistent with the adsorption of flattened vesicles, and spherical vesicles have been found in a small range of surface compositions. The kinetics of the adsorption process is consistent with the assumption of spherical vesicles as long-living intermediates for surfaces of a high 6-mercaptohexanol content. No long-living spherical vesicles have been detected for surfaces with a large fraction of EO(3)Cholesteryl tethers. The observed differences between the surfaces suggest that for the formation of tBLMs (unlike supported BLMs) no critical surface coverage of vesicles is needed prior to lipid bilayer formation.

Chain orientation and headgroup structure in Langmuir monolayers of stearic acid and metal stearate (Ag, Co, Zn, and Pb) studied by infrared reflection-absorption spectroscopy

The monolayers of stearic acid at the air-water interface on pure water and ion-containing subphases have been studied using infrared reflection-absorption spectroscopy. In the presence of Co(2+), Zn(2+), and Pb(2+), ordered hydrocarbon chains and hexagonal subcell structure remain almost unchanged in comparison with those for the monolayer on pure water at the surface pressure of 20 m/Nm. In the cases of Co(2+) and Zn(2+), the H-bonded monodentate and unsymmetric bidentate chelating structure within the headgroups were formed, and in the case of Pb(2+), three types of structures, bidentate chelating, unsymmetric chelating, and bidentate bridging coordinations, were formed. The hydrocarbon chains in the monolayers are uniaxially oriented at a tilt angle of approximately 0 degrees with respect to the surface normal in contrast to a tilt angle of approximately 20 degrees on pure water surface at 20 m/Nm by the computer simulation of theoretical calculation to experimental data. In the presence of Ag(+), multilayers were developed with the highly ordered hydrocarbon chains in a triclinic subcell structure and a bidentate bridging structure within the headgroups. The multilayers were composed of three monolayers and the hydrocarbon chains in each monolayer were oriented at an angle of approximately 30 degrees away from the surface normal with their C-C-C planes almost perpendicular to the water surface.

Proton sponge and fatty acid interactions at the air-water interface. Thermodynamic, spectroscopic, and microscopic study

Mixed Langmuir and Langmuir-Blodgett (LB) films of a proton sponge, namely, diphenyl bis(octadecylamino)phosphonium bromide, and a fatty acid, docosanoic acid, with different molar ratios have been fabricated. Surface pressure versus area per molecule isotherms were registered, and the excess areas and excess Gibbs energy of mixing were calculated. Strong interactions between the proton sponge and the fatty acid take place at the air-water interface. The existence of a stoichiometric 1:1 acid-base reaction between the two components forming a complex on the water surface at high surface pressures has been demonstrated. Furthermore, the reaction had an efficiency close to 100% at the air-water interface; meanwhile, it hardly takes place in organic solvents such as chloroform or even a mixture of chloroform and dimethyl sulfoxide. The floating films were transferred to solid supports and characterized by means of several techniques including IR spectroscopy, X-ray diffraction, and atomic force microscopy, revealing the presence of highly ordered alkyl chains and a constant architecture along the different layers as well as the presence of different domains in the LB films, except those having a 1:1 proton sponge-fatty acid ratio that are homogeneous. Such domains have been interpreted as the presence of two different phases, the 1:1 complex plus the excess component in the mixture.

IRRAS Studies on Chain Orientation in the Monolayers of Amino Acid Amphiphiles at the Air−Water Interface Depending on Metal Complex and Hydrogen Bond Formation with the Headgroups

Monolayers of N-octadecanoyl-L-alanine at the air-water interface on pure water and metal ion containing subphases have been studied using polarized infrared reflection-absorption spectroscopy (IRRAS). The metal complex and hydrogen bond formation with the headgroups give rise to a change in chain order depending on metal ion in the subphase. On pure water and Ag(+)-/Pb(2+)-containing subphase, the antisymmetric CH(2) stretching band intensity [nu(a)(CH(2))] undergoes a slower increase than the symmetric one [nu(s)(CH(2))] below the Brewster angle, so the intensity ratios of nu(a)(CH(2))/nu(s)(CH(2)) are less than 1 in the cases of Ag(+) and Pb(2+). Beyond the Brewster angle, the nu(a)(CH(2)) band intensities are substantially reduced in comparison with the nu(s)(CH(2)) ones in the cases of pure water and Ag(+), but the nu(a)(CH(2)) bands still remain negative-oriented in the presence of Pb(2+). These unusual spectral features indicate that the alkyl chains take a preferential orientation with their C-C-C planes parallel to the water surface. The parallel packing of the alkyl chains results from the intermolecular hydrogen bonds C=O...H-N between the neighboring amide groups, strengthened by the metal complex of covalent interaction. On the Ca(2+)-/Cu(2+)-containing subphase, the corresponding polarized spectra display a usual behavior. The alkyl chains are roughly estimated to be inclined around 35-40 degrees from the surface normal on the assumption of chain segment orientation for the monolayers in the liquid-expanded phase. The chain conformation and tilt are closely related to the formation of intramolecular hydrogen bonds and the ionic interaction of the metal complex in the cases of Ca(2+) and Cu(2+).

Monolayer–multilayer transitions in a lung surfactant model: IR reflection–absorption spectroscopy and atomic force microscopy

A hydrophobic pulmonary surfactant protein, SP-C, has been implicated in surface-associated activities thought to facilitate the work of breathing. Model surfactant films composed of lipids and SP-C display a reversible transition from a monolayer to surface-associated multilayers upon compression and expansion at the air/water (A/W) interface. The molecular-level mechanics of this process are not yet fully understood. The current work uses atomic force microscopy on Langmuir-Blodgett films to verify the formation of multilayers in a dipalmitoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, cholesterol, and SP-C model system. Isotherms of SP-C-containing films are consistent with exclusion and essentially complete respreading during compression and expansion, respectively. Multilayer formation was not detected in the absence of SP-C. Most notable are the results from IR reflection-absorption spectroscopy (IRRAS) conducted at the A/W interface, where the position and intensity of the Amide I band of SP-C reveal that the predominantly helical structure changes its orientation in monolayers versus multilayers. IRRAS measurements indicate that the helix tilt angle changed from approximately 80 degrees in monolayers to a transmembrane orientation in multilayers. The results constitute the first quantitative measure of helix orientation in mixed monolayer/multilamellar domains at the A/W interface and provide insight into the molecular mechanism for SP-C-facilitated respreading of surfactant.

Orientation of peptides in aqueous monolayer films. Infrared reflection-absorption spectroscopy studies of a synthetic amphipathic beta-sheet

Infrared reflection-absorption spectroscopy (IRRAS) intensities of the Amide I vibration are used to develop a quantitative approach for determining the Euler angles that describe the orientation of protein beta-sheets in aqueous monolayer films. A synthetic amphipathic peptide, Val-Glu-Val-Orn-Val-Glu-Val-Orn-Val-Glu-Val-Orn-Val-OH is used as a test case. The pattern of Amide I frequencies suggests that the molecule is organized as an antiparallel beta-sheet at the air/water interface. The model used to simulate the Amide I intensities reveals that the beta-sheet has a slight preferential alignment parallel to the direction of compression; i.e., deviation from uniaxial symmetry is observed. In addition, the sheet is found to lie flat on the aqueous surface, with (presumably) the polar side chains interacting with the aqueous subphase. Limitations and advantages of the theoretical approach are discussed.