Dynamics of Water Confined on a TiO2 (Anatase) Surface

8-Bromo-cAMP attenuates human airway epithelial barrier disruption caused by titanium dioxide fine and nanoparticles

Titanium dioxide fine particles (TiO2-FPs) and nanoparticles (TiO2-NPs) are the most widely used whitening pigments worldwide. Inhalation of TiO2-FPs and TiO2-NPs can be harmful as it triggers toxicity in the airway epithelial cells. The airway epithelium serves as the respiratory system's first line of defense in which airway epithelial cells are significant targets of inhaled pathogens and environmental particles. Our group previously found that TiO2-NPs lead to a disrupted barrier in the polarized airway epithelial cells. However, the effect of TiO2-FPs on the respiratory epithelial barrier has not been examined closely. In this study, we aimed to compare the effects of TiO2-FPs and TiO2-NPs on the structure and function of the airway epithelial barrier. Additionally, we hypothesized that 8-Bromo-cAMP, a cyclic adenosine monophosphate (cAMP) derivative, would alleviate the disruptive effects of both TiO2-FPs and TiO2-NPs. We observed increased epithelial membrane permeability in both TiO2-FPs and TiO2-NPs after exposure to 16HBE cells. Immunofluorescent labeling showed that both particle sizes disrupted the structural integrity of airway epithelial tight junctions and adherens junctions. TiO2-FPs had a slightly more, but insignificant impact on the epithelial barrier disruption than TiO2-NPs. Treatment with 8-Bromo-cAMP significantly attenuated the barrier-disrupting impact of both TiO2-FPs and TiO2-NPs on cell monolayers. Our study demonstrates that both TiO2-FPs and TiO2-NPs cause comparable barrier disruption and suggests a protective role for cAMP signaling. The observed effects of TiO2-FPs and TiO2-NPs provide a necessary understanding for characterizing the pathways involved in the defensive role of the cAMP pathway on TiO2-induced airway barrier disruption.

Vibrational Analysis of Hydration-Layer Water around Ubiquitin, Unpeeled Layer by Layer: Molecular-Dynamics Perceptions

Classical molecular-dynamics simulations have been performed to examine the interplay between ubiquitin and its hydration-water sub-layers, chiefly from a vibrational-mode and IR viewpoint-where we analyse individual sub-layers characteristics. The vibrational Density of States (VDOS) revealed that the first solvation sub-shell indicates a confined character therein. For layers of increasing distance from the surface, the adoption of greater bulk-like spectral behaviour was evident, suggesting that vibrational harmonisation to bulk occurs within 6-7 Å of the surface.

Energetic Stability and Interfacial Complexity of Ti3C2Tx MXenes Synthesized with HF/HCl and CoF2/HCl as Etching Agents

MXenes are ultra-thin two-dimensional layered early transition-metal carbides and nitrides with potential applications in various emerging technologies, such as energy storage, water purification, and catalysis. MXenes are synthesized from the parent MAX phases with different etching agents [hydrofluoric acid (HF) or fluoride salts with a strong acid] by selectively removing a more weakly bound crystalline layer of Al or Ga replaced by surface groups (-O, -F, -OH, etc.). Ti₃C₂T_x MXene synthesized by CoF₂/HCl etching has layered heterogeneity due to intercalated Al³⁺ and Co²⁺ that act as pillars for interlayer spacings. This study investigates the impacts of etching environments on the compositional, interfacial, structural, and thermodynamic properties of Ti₃C₂T_x MXenes. Specifically, compared with HF/HCl etching, CoF₂/HCl treatment leads to a Ti₃C₂T_x MXene with a broader distribution of interlayer distances, increased number of intercalated cations, and decreased degree of hydration. Moreover, we determine the enthalpies of formation at 25 °C (ΔH_f,25°C) of Ti₃C₂T_x MXenes etched with CoF₂/HCl, ΔH_f,25°C = -1891.7 ± 35.7 kJ/mol Ti₃C₂, and etched with HF/HCl, ΔH_f,25°C = -1978.2 ± 35.7 kJ/mol Ti₃C₂, using high-temperature oxidation drop calorimetry. These energetic data are discussed and compared with experimentally derived and computationally predicted values to elucidate the effects of intercalants and surface groups of MXenes. We find that MXenes with intercalated metal cations have a less exothermic ΔH_f,25°C from an increase in the interlayer space and dimension heterogeneity and a decrease in the degree of hydration leading to reduced layer-layer van der Waals interactions and weakened hydration effects applied on the MXene layers. The outcomes of this study further our understanding of MXene's energetic-structural-interfacial property relationships.

Self-Diffusion of Individual Adsorbed Water Molecules at Rutile (110) and Anatase (101) TiO2 Interfaces from Molecular Dynamics

The distribution of individual water molecules’ self-diffusivities in adsorbed layers at TiO2 surfaces anatase (101) and rutile (110) have been determined at 300 K for inner and outer adsorbed layers, via classical molecular-dynamics methods. The layered-water structure has been identified and classified in layers making use of local order parameters, which proved to be an equally valid method of “self-ordering” molecules in layers. Significant distinctness was observed between anatase and rutile in disturbing these molecular distributions, more specifically in the adsorbed outer layer. Anatase (101) presented significantly higher values of self-diffusivity, presumably due to its “corrugated” structure that allows more hydrogen bonding interaction with adsorbed molecules beyond the first hydration layer. On the contrary, rutile (110) has adsorbed water molecules more securely “trapped” in the region between Ob atoms, resulting in less mobile adsorbed layers.

Diffusion and reaction pathways of water near fully hydrated TiO2 surfaces from ab initio molecular dynamics

Ab initio molecular dynamics simulations are reported for water-embedded TiO₂ surfaces to determine the diffusive and reactive behavior at full hydration. A three-domain model is developed for six surfaces [rutile (110), (100), and (001), and anatase (101), (100), and (001)] which describes waters as "hard" (irreversibly bound to the surface), "soft" (with reduced mobility but orientation freedom near the surface), or "bulk." The model explains previous experimental data and provides a detailed picture of water diffusion near TiO₂ surfaces. Water reactivity is analyzed with a graph-theoretic approach that reveals a number of reaction pathways on TiO₂ which occur at full hydration, in addition to direct water splitting. Hydronium (H₃O⁺) is identified to be a key intermediate state, which facilitates water dissociation by proton hopping between intact and dissociated waters near the surfaces. These discoveries significantly improve the understanding of nanoscale water dynamics and reactivity at TiO₂ interfaces under ambient conditions.

A quantum-mechanics molecular-mechanics scheme for extended systems

We introduce and discuss a hybrid quantum-mechanics molecular-mechanics (QM-MM) approach for Car-Parrinello DFT simulations with pseudopotentials and planewaves basis, designed for the treatment of periodic systems. In this implementation the MM atoms are considered as additional QM ions having fractional charges of either sign, which provides conceptual and computational simplicity by exploiting the machinery already existing in planewave codes to deal with electrostatics in periodic boundary conditions. With this strategy, both the QM and MM regions are contained in the same supercell, which determines the periodicity for the whole system. Thus, while this method is not meant to compete with non-periodic QM-MM schemes able to handle extremely large but finite MM regions, it is shown that for periodic systems of a few hundred atoms, our approach provides substantial savings in computational times by treating classically a fraction of the particles. The performance and accuracy of the method is assessed through the study of energetic, structural, and dynamical aspects of the water dimer and of the aqueous bulk phase. Finally, the QM-MM scheme is applied to the computation of the vibrational spectra of water layers adsorbed at the TiO2 anatase (1 0 1) solid-liquid interface. This investigation suggests that the inclusion of a second monolayer of H2O molecules is sufficient to induce on the first adsorbed layer, a vibrational dynamics similar to that taking place in the presence of an aqueous environment. The present QM-MM scheme appears as a very interesting tool to efficiently perform molecular dynamics simulations of complex condensed matter systems, from solutions to nanoconfined fluids to different kind of interfaces.

The effect of hydrazine intercalation on the structure and capacitance of 2D titanium carbide (MXene)

Herein we show that hydrazine intercalation into 2D titanium carbide (Ti3C2-based MXene) results in changes in its surface chemistry by decreasing the amounts of fluorine, OH surface groups and intercalated water. It also creates a pillaring effect between Ti3C2Tx layers pre-opening the structure and improving the accessability to active sites. The hydrazine treated material has demonstrated a greatly improved capacitance of 250 F g(-1) in acidic electrolytes with an excellent cycling ability for electrodes as thick as 75 μm.

Anisotropic dynamics of water ultraconfined in macroscopically oriented channels of single-crystal beryl: a multifrequency analysis

The properties of fluids can be significantly altered by the geometry of their confining environments. While there has been significant work on the properties of such confined fluids, the properties of fluids under ultraconfinement, environments where, at least in one plane, the dimensions of the confining environment are similar to that of the confined molecule, have not been investigated. This paper investigates the dynamic properties of water in beryl (Be(3)Al(2)Si(6)O(18)), the structure of which contains approximately 5-Å-diam channels parallel to the c axis. Three techniques, inelastic neutron scattering, quasielastic neutron scattering, and dielectric spectroscopy, have been used to quantify these properties over a dynamic range covering approximately 16 orders of magnitude. Because beryl can be obtained in large single crystals we were able to quantify directional variations, perpendicular and parallel to the channel directions, in the dynamics of the confined fluid. These are significantly anisotropic and, somewhat counterintuitively, show that vibrations parallel to the c-axis channels are significantly more hindered than those perpendicular to the channels. The effective potential for vibrations in the c direction is harder than the potential in directions perpendicular to it. There is evidence of single-file diffusion of water molecules along the channels at higher temperatures, but below 150 K this diffusion is strongly suppressed. No such suppression, however, has been observed in the channel-perpendicular direction. Inelastic neutron scattering spectra include an intramolecular stretching O-H peak at ~465 meV. As this is nearly coincident with that known for free water molecules and approximately 30 meV higher than that in liquid water or ice, this suggests that there is no hydrogen bonding constraining vibrations between the channel water and the beryl structure. However, dielectric spectroscopic measurements at higher temperatures and lower frequencies yield an activation energy for the dipole reorientation of 16.4 ± 0.14 kJ/mol, close to the energy required to break a hydrogen bond in bulk water. This may suggest the presence of some other form of bonding between the water molecules and the structure, but the resolution of the apparent contradiction between the inelastic neutron and dielectric spectroscopic results remains uncertain.

Nanoscale effects on thermodynamics and phase equilibria in oxide systems

Because different solid materials (phases) have different surface energies, equilibria among them will be significantly affected by particle size. This Minireview summarizes experimental (calorimetric) data for the surface energies of oxides and discusses shifts in the stability of polymorphs, the thermodynamics of hydration, and oxidation-reduction reactions in nanoscale oxide systems.